Direct detection of calmodulin tuning by ryanodine receptor channel targets using a Ca2+-sensitive acrylodan-labeled calmodulin

Calmodulin (CaM) activates the skeletal muscle ryanodine receptor (RyR1) at nanomolar Ca(2+) concentrations but inhibits it at micromolar Ca(2+) concentrations, indicating that binding of Ca(2+) to CaM may provide a molecular switch for modulating RyR1 channel activity. To directly examine the Ca(2+) sensitivity of RyR1-complexed CaM, we used an environment-sensitive acrylodan adduct of CaM. The resulting (ACR)CaM probe displayed high-affinity binding to, and Ca(2+)-dependent regulation of, RyR1 similar to that of unlabeled wild-type (WT) CaM. Upon addition of Ca(2+), (ACR)CaM exhibited a substantial (>50%) decrease in fluorescence (K(Ca) = 2.7 +/- 0.8 microM). A peptide derived from the RyR1 CaM binding domain (RyR1(3614)(-)(43)) caused an even more pronounced Ca(2+)-dependent fluorescence decrease, and a >or=10-fold leftward shift in its K(Ca) (0.2 +/- 0.1 microM). In the presence of intact RyR1 channels in SR vesicles, (ACR)CaM fluorescence spectra were distinct from those in the presence of RyR1(3614)(-)(43), although a Ca(2+)-dependent decrease in fluorescence was still observed. The K(Ca) for (ACR)CaM fluorescence in the presence of SR (0.8 +/- 0.4 microM) was greater than in the presence of RyR1(3614)(-)(43) but was consistent with functional determinations showing the conversion of (ACR)CaM from channel activator (apoCaM) to inhibitor (Ca(2+)CaM) at Ca(2+) concentrations between 0.3 and 1 microM. These results indicate that binding to RyR1 targets evokes significant changes in the CaM structure and Ca(2+) sensitivity (i.e., CaM tuning). However, changes resulting from binding of CaM to the full-length, tetrameric channels are clearly distinct from changes caused by the RyR1-derived peptide. We suggest that the Ca(2+) sensitivity of CaM when in complex with full-length channels may be tuned to respond to physiologically relevant changes in Ca(2+).     

The inhibitory monoclonal antibody M7-PB-E9 stabilizes E2 conformational states of Na+,K(+)-ATPase.

Monoclonal antibody M7-PB-E9 binds the sheep kidney Na+,K(+)-ATPase alpha-subunit with high affinity (Kd = 3 nM) and inhibits enzyme turnover in competition with ATP, and, like ATP, in the presence of Mg2+, it stimulates the rate of ouabain binding [Ball, W. J. (1984) Biochemistry 23, 2275-2281]. In this study, covalent attachment of fluorescein 5'-isothiocyanate (FITC) at (or near) the enzyme's ATP binding site did not alter the antibody's affinity for alpha nor did bound antibody alter the anisotropy of (r = 0.36) or the solvent accessibility of iodide to bound FITC. Further, in its E1Na+ conformation (4 mM NaCl), the enzyme's affinity for the ATP congener eosin was unaltered by the bound antibody (Kd = 9 nM). In contrast, partial E2 conformations induced by KCl lowered eosin affinities (0.2 mM KCl, Kd = 28 nM; 0.4 mM, Kd = 86 nM), and M7-PB-E9 reduced these affinities further (Kd = 66 and 130 nM, respectively). By monitoring the fluorescence changes of the FITC-labeled enzyme, the antibody was found to assist several ligand-induced conformational transitions from E1 (E1Na+ or E1Tris) to E2 (E2K+, E2-P(i)Mg2+, or E2Mg2+.ouabain) states, and inhibit the E2K(+)-->E1Na+ transition. Antibody binding alone, however, did not appear to significantly alter enzyme conformation. The antibody therefore is not directed against the ATP site but binds to a region of alpha distinct from any ligand binding site and which plays an important role in the E1<-->E2 transitions.     

Characterization of the human calmodulin-like protein expressed in Escherichia coli.

The protein-coding region of an intronless human calmodulin-like gene [Koller, M., & Strehler, E. E. (1988) FEBS Lett. 239, 121-128] has been inserted into a pKK233-2 expression vector, and the 148-residue, M(r) = 16,800 human protein was purified to apparent homogeneity by phenyl-Sepharose affinity chromatography from cultures of Escherichia coli JM105 transformed with the recombinant vector. Several milligrams of the purified protein were obtained from 1 L of bacterial culture. A number of properties of human CLP were compared to those of bacterially expressed human calmodulin (CaM) and of bovine brain CaM. CLP showed a characteristic Ca(2+)-dependent electrophoretic mobility shift on SDS-polyacrylamide gels, although the magnitude of this shift was smaller than that observed with CaM. CLP was able to activate the 3',5'-cyclic nucleotide phosphodiesterase to the same Vmax as normal CaM, albeit with a 7-fold higher Kact. In contrast, the erythrocyte plasma membrane Ca(2+)-ATPase could only be stimulated to 62% of its maximal CaM-dependent activity by CLP. CLP was found to contain four Ca(2+)-binding sites with a mean affinity constant of 10(5) M-1, a value about 10-fold lower than that for CaM under comparable conditions. The highly tissue-specifically-expressed CLP represents a novel human Ca(2+)-binding protein showing characteristics of a CaM isoform.     

Ca(2+)-calmodulin-dependent protein kinases Ia and Ib from rat brain I. Identification, purification, and structural comparisons.

Two Ca(2+)-calmodulin (CaM)-dependent protein kinases were purified from rat brain using as substrate a synthetic peptide based on site 1 (site 1 peptide) of the synaptic vesicle-associated protein, synapsin I. One of the purified enzymes was an approximately 89% pure protein of M(r) = 43,000 which bound CaM in a Ca(2+)-dependent fashion. The other purified enzyme was an apparently homogenous protein of M(r) = 39,000 accompanied by a small amount of a M(r) = 37,000 form which may represent a proteolytic product of the 39-kDa enzyme. The 39-kDa protein bound CaM in a Ca(2+)-dependent fashion. Gel filtration analysis indicated that both enzymes are monomers. The 43- and 39-kDa enzymes are named Ca(2+)-CaM-dependent protein kinases Ia and Ib (CaM kinases Ia, Ib), respectively. The specific activities of CaM kinases Ia and Ib were similar (5-8 mumol/min/mg protein). CaM kinase Ia (but not CaM kinase Ib) activity was enhanced by addition of a CaM-Sepharose column wash (non-binding) fraction suggesting the existence of an "activator" of CaM kinase Ia. Both kinases phosphorylated exogenous substrates (site 1 peptide and synapsin I) in a Ca(2+)-CaM-dependent fashion and both kinases underwent autophosphorylation. CaM kinase Ia autophosphorylation was Ca(2+)-CaM-dependent and occurred exclusively on threonine while CaM kinase Ib autophosphorylation showed Ca(2+)-CaM independence and occurred on both serine and threonine. Proteolytic digestion of autophosphorylated CaM kinases Ia and Ib yielded phosphopeptides of differing M(r). These characteristics, as well as enzymatic and regulatory properties (DeRemer, M. F., Saeli, R. J. Brautigen, D. L., and Edelman, A. M. (1992) J. Biol. Chem. 267, 13466-13471), indicate that CaM kinases Ia and Ib are distinct and possibly previously unrecognized enzymes.     

Activation of smooth muscle myosin light chain kinase by calmodulin. Role of LYS(30) and GLY(40).

Calmodulin (CaM)-dependent myosin light chain kinase (MLCK) plays a key role in activation of smooth muscle contraction. A soybean isoform of CaM, SCaM-4 (77% identical to human CaM) fails to activate MLCK, whereas SCaM-1 (90.5% identical to human CaM) is as effective as CaM. We exploited this difference to gain insights into the structural requirements in CaM for activation of MLCK. A chimera (domain I of SCaM-4 and domains II-IV of SCaM-1) behaved like SCaM4, and analysis of site-specific mutants of SCaM-1 indicated that K30E and G40D mutations were responsible for the reduction in activation of MLCK. Competition experiments showed that SCaM-4 binds to the CaM-binding site of MLCK with high affinity. Replacement of CaM in skinned smooth muscle by exogenous CaM or SCaM-1, but not SCaM-4, restored Ca(2+)-dependent contraction. K30E/M36I/G40D SCaM-1 was a poor activator of contraction, but site-specific mutants, K30E, M36I and G40D, each restored Ca(2+)-induced contraction to CaM-depleted skinned smooth muscle, consistent with their capacity to activate MLCK. Interpretation of these results in light of the high-resolution structures of (Ca(2+))(4)-CaM, free and complexed with the CaM-binding domain of MLCK, indicates that a surface domain containing Lys(30) and Gly(40) and residues from the C-terminal domain is created upon binding to MLCK, formation of which is required for activation of MLCK. Interactions between this activation domain and a region of MLCK distinct from the known CaM-binding domain are required for removal of the autoinhibitory domain from the active site, i.e., activation of MLCK, or this domain may be required to stabilize the conformation of (Ca(2+))(4)-CaM necessary for MLCK activation.     

Interactions of the products, 8-oxo-dGMP,dGMP, and pyrophosphate with the MutT nucleoside triphosphate pyrophosphohydrolase

The MutT enzyme from E. coli, in the presence of a divalent cation, catalyzes the hydrolysis of nucleoside- and deoxynucleoside-triphosphate (NTP) substrates by nucleophilic substitution at Pbeta, to yield a nucleotide (NMP) and PPi. The best substrate of MutT is believed to be the mutagenic nucleotide 8-oxo-dGTP, on the basis of its 10(3.4)-fold lower K(m) than that of dGTP (Maki, H., and Sekiguchi, M. (1992) Nature 355, 273-275). To determine the true affinity of MutT for an 8-oxo-nucleotide and to elucidate the kinetic scheme, product inhibition by 8-oxo-dGMP and dGMP and direct binding of these nucleotides to MutT were studied. With Mg(2+)-activated dGTP hydrolysis, 8-oxo-dGMP is a noncompetitive inhibitor with K(I)(sl)(o)(pe) = 49 nM, which is 10(4.6)-fold lower than the K(I)(sl)(o)(pe)of dGMP (1.7 mM). Similarly, the K(I)(intercept) of 8-oxo-dGMP is 10(4.0)-fold lower than that of dGMP. PPi is a linear uncompetitive inhibitor, suggesting that it dissociates first from the product complex, followed by the nucleotide. Noncompetitive inhibition by dGMP and 8-oxo-dGMP indicates an "iso" mechanism in which the nucleotide product leaves an altered form of the enzyme which slowly reverts to the form which binds substrate. Consistent with this kinetic scheme, (1)H-(15)N HSQC titration of MutT with dGMP reveals weak binding and fast exchange from one site with a K(D) = 1.8 mM, in agreement with its K(I)(sl)(o)(pe). With 8-oxo-dGMP, tight binding and slow exchange (n = 1.0 +/- 0.1, K(D) < 0.25 mM) are found. Isothermal calorimetric titration of MutT with 8-oxo-dGMP yields a K(D) of 52 nM, in agreement with its K(I)(sl)(o)(pe). Changing the metal activator from Mg(2+) to Mn(2+) had little effect on the K(I)(sl)(o)(pe) of dGMP or of 8-oxo-dGMP, consistent with the second-sphere enzyme-M(2+)-H(2)O-NTP-M(2+) complex found by NMR (Lin, J., Abeygunawardana, C., Frick, D. N., Bessman, M. J., and Mildvan, A. S. (1997) Biochemistry 36, 1199-1211), but it decreased the K(I) of PPi 12-fold, suggesting direct coordination of the PPi product by the enzyme-bound divalent cation. The tight binding of 8-oxo-dGMP to MutT (DeltaG degrees = -9.8 kcal/mol) is driven by a highly favorable enthalpy ( = -32 +/- 7 kcal/mol), with an unfavorable entropy (<-TDeltaS(o)(binding)> = +22 +/- 7 kcal/mol), as determined by van't Hoff analysis of the effect of temperature on the K(I)(sl)(o)(pe) and by isothermal titration calorimetry in two buffer systems. The binding of 8-oxo-dGMP to MutT induces changes in backbone (15)N and NH chemical shifts of 62 residues widely distributed throughout the protein, while dGMP binding induces smaller changes in only 22 residues surrounding the nucleotide binding site, suggesting that the unusually high affinity of MutT for 8-oxo-nucleotides is due not only to interactions with the altered 8-oxo or 7-NH positions on guanine, but results primarily from diffuse structural changes which tighten the protein structure around the 8-oxo-nucleotide.     

Anion permeation in Ca(2+)-activated Cl(-) channels

Ca(2+)-activated Cl channels (Cl(Ca)Cs) are an important class of anion channels that are opened by increases in cytosolic [Ca(2+)]. Here, we examine the mechanisms of anion permeation through Cl(Ca)Cs from Xenopus oocytes in excised inside-out and outside-out patches. Cl(Ca)Cs exhibited moderate selectivity for Cl over Na: P(Na)/P(Cl) = 0.1. The apparent affinity of Cl(Ca)Cs for Cl was low: K(d) = 73 mM. The channel had an estimated pore diameter >0.6 nm. The relative permeabilities measured under bi-ionic conditions by changes in E(rev) were as follows: C(CN)(3) > SCN > N(CN)(2) > ClO(4) > I > N(3) > Br > Cl > formate > HCO(3) > acetate = F > gluconate. The conductance sequence was as follows: N(3) > Br > Cl > N(CN)(2) > I > SCN > COOH > ClO(4) > acetate > HCO(3) = C(CN)(3) > gluconate. Permeant anions block in a voltage-dependent manner with the following affinities: C(CN)(3) > SCN = ClO(4) > N(CN)(2) > I > N(3) > Br > HCO(3) > Cl > gluconate > formate > acetate. Although these data suggest that anionic selectivity is determined by ionic hydration energy, other factors contribute, because the energy barrier for permeation is exponentially related to anion hydration energy. Cl(Ca)Cs exhibit weak anomalous mole fraction behavior, implying that the channel may be a multi-ion pore, but that ions interact weakly in the pore. The affinity of the channel for Ca(2+) depended on the permeant anion at low [Ca(2+)] (100-500 nM). Apparently, occupancy of the pore by a permeant anion increased the affinity of the channel for Ca(2+). The current was strongly dependent on pH. Increasing pH on the cytoplasmic side decreased the inward current, whereas increasing pH on the external side decreased the outward current. In both cases, the apparent pKa was voltage-dependent with apparent pKa at 0 mV = approximately 9.2. The channel may be blocked by OH(-) ions, or protons may titrate a site in the pore necessary for ion permeation. These data demonstrate that the permeation properties of Cl(Ca)Cs are different from those of CFTR or ClC-1, and provide insights into the nature of the Cl(Ca)C pore.     

Conformational fluctuations of the Ca2+-ATPase in the native membrane environment. Effects of pH, temperature, catalytic substrates, and thapsigargin

Digestion with proteinase K or trypsin yields complementary information on conformational transitions of the Ca(2+)-ATPase (SERCA) in the native membrane environment. Distinct digestion patterns are obtained with proteinase K, revealing interconversion of E1 and E2 or E1 approximately P and E2-P states. The pH dependence of digestion patterns shows that, in the presence of Mg(2+), conversion of E2 to E1 pattern occurs (even when Ca(2+) is absent) as H(+) dissociates from acidic residues. Mutational analysis demonstrates that the Glu(309) and Glu(771) acidic residues (empty Ca(2+)-binding sites I and II) are required for stabilization of E2. Glu(309) ionization is most important to yield E1. However, a further transition produced by Ca(2+) binding to E1 (i.e. E1.2Ca(2+)) is still needed for catalytic activation. Following ATP utilization, H(+)/Ca(2+) exchange is involved in the transition from the E1 approximately P.2Ca(2+) to the E2-P pattern, whereby alkaline pH will limit this conformational transition. Complementary experiments on digestion with trypsin exhibit high temperature dependence, indicating that, in the E1 and E2 ground states, the ATPase conformation undergoes strong fluctuations related to internal protein dynamics. The fluctuations are tightly constrained by ATP binding and phosphoenzyme formation, and this constraint must be overcome by thermal activation and substrate-free energy to allow enzyme turnover. In fact, a substantial portion of ATP free energy is utilized for conformational work related to the E1 approximately P.2Ca(2+) to E2-P transition, thereby disrupting high affinity binding and allowing luminal diffusion of Ca(2+). The E2 state and luminal path closure follow removal of conformational constraint by phosphate.     

Electroporative fast pore-flickering of the annexin V-lipid surface complex, a novel gating concept for ion transport

In contact with lipid bilayers and Ca2+-ions, the intracellular protein human annexin V (wild-type), Mr = 35,800, forms two types of cation-selective channels for the transport of Ca2+-, K+-, Na+- and Mg2+-ions, depending on the protein concentration [AN]. Type (I) channel events are large and predominant at high values [AN] > or = K = 5 nM at 296 K. At 50 mM Ca2+, symmetrical on both membrane sides, AN added at the cis side, the conductance is gCa(I) = 22 +/- 2 pS and at symmetrical 0.1 M K+-conditions: gK(I) = 32 +/- 3 pS, associated with two mean open-times tau1(I) = 0.68 +/- 0.2 ms and tau2(I) = 31 +/- 2 ms. Monoclonal anti-AN antibodies added to the trans-side first increase the mean open-times and then abolish the channel activity, suggesting that type (I) channels refer to a membrane spanning protein complex, probably a trimer T, which at [AN] > K changes its membrane organization to a higher oligomer, probably to the side-by-side double-trimer T2. The smaller type (II) channel events are predominant at low [AN] < or = K and refer to the (electroporative) adsorption complex of the monomer. The conductances g(i)(II) for symmetrical concentrations depend non-linearly on the voltage Um = Uext + U(AN), where U(AN) = 0.02 +/- 0.002 V is the electrostatic contribution of the Ca2+-AN complex and Uext the externally applied voltage. There is only one mean open-time tau(o)(II) which is voltage-dependent according to a functional of b x Um2 where b = 113.9 +/- 15 V(-2), yielding an activation Gibbs free energy of Ga = RT x b x Um2. The conformational flicker probability f(i)(II) in g(i)(II) = g(i)0(II) x gamma(i) x f(i)(II) is non-linearly voltage-dependent according to a functional of a x Um2. The Nernst term gamma(i) refers to asymmetrical ion concentrations. From a = 50 V(-2), independent of the ion type, we obtain f(i)0(II) = 0.03 +/- 0.002 and the conductances for the fully open-channel states: gCa0(II) = 69 +/- 3 pS (0.05 M Ca2+) and gK0(II) = 131 +/- 5 pS (1.2 M K+). From the electroporation term a = pi[r(p)2]epsilon0(epsilon(w) - epsilon(m))/(2 kTd) we determine the mean pore radius of the complex in its fully open state as r(p)= 0.86 +/- 0.05 nm. The adsorbed annexin V (Ca2+) monomer appears to electrostatically facilitate the electric pore formation at the contact interface between the protein and the lipid phase. The complex rapidly flickers and thus limits the ion transport in a voltage-dependent manner.     

Intramolecular cross-linking at the active site of the Ca2+-ATPase of sarcoplasmic reticulum. High and low affinity nucleotide binding and evidence of active site closure in E2-P

Limited reaction of glutaraldehyde with the Ca2+-ATPase (Mr approximately 110,000) of sarcoplasmic reticulum results in intramolecular cross-linking at the active site, which can be detected by an anomalous increase in apparent molecular weight (Mr approximately 125,000) on sodium dodecyl sulfate-polyacrylamide gel electrophoresis (Ross D.C., and McIntosh D.B. (1987) J. Biol. Chem. 262, 2042-2049). ATP, ADP, AMPPCP, trinitrophenyladenosine triphosphate, and decavanadate inhibited the cross-link in a manner suggestive of a homogeneous class of inhibitory sites, with K0.5 values for inhibition in agreement with Kd values for binding to the active site. Cross-link formation was inhibited in proportion to phosphoenzyme levels formed from Pi (E2-P) whereas stoichiometric phosphorylation from CaATP (E1-P) had no effect. Inhibition was observed at millimolar concentrations of CaATP, indicative of nucleotide binding to E1-P. MgATP, in the presence of Ca2+, inhibited cross-linkage in the micromolar and millimolar concentration ranges, the former attributable to E1 X ATP and E2-P formation and the latter to ATP binding mainly to E1-P. The inability to cross-link the active site only of the E2-P intermediate suggests a unique active site conformation, possibly a closed active site cleft, which we suggest is linked to low affinity, inwardly orientated Ca2+-binding sites.     

The ethylene/metal(0) and ethylene/metal(I) redox system: model ab initio calculations

Ab initio calculations (coupled cluster with single and double excitations; CCSD) have been used to investigate the model redox systems ethylene:M(0) (M = Li, Na, K, Rb, Cs) and ethylene:M(I) (M = Be, Mg, Ca, Sr, Ba, Zn, Cd, Hg). Within C2v symmetry, the ground (2A1) states correspond to the charge distribution given in the title. The lowest (2B2) excited states correspond, somewhat counter intuitively, to the ethylene*-/=M(II)ion pair. These trends can be rationalized on the basis of simple electrostatic and configuration-mixing arguments that lead to two simple equations for predicting the electron-transfer energies for oxidation or reduction of the ethylene. The electron-transfer energies to the 2B2 ion pairs are dominated by the electrostatic ion-pairing energies.     

Kinetics of calmodulin binding to calcineurin

Calcineurin (CaN) binds Ca(2+)-saturated calmodulin (CaM) with relatively high affinity; however, an accurate steady-state K(d) value has not been determined. In this report, we describe, using steady-state and stopped-flow fluorescence techniques, the rates of association and dissociation of Ca(2+)-saturated CaM from CaN heterodimer (CaNA/CaNB) and CaNA only. The rate of Ca(2+)/CaM association was determined to be 4.6 x 10(7) M(-1)s(-1). The rate of Ca(2+)/CaM dissociation from CaN was slower than previously reported and was approximately 0.0012 s(-1). In preparations of CaNA alone (no regulatory CaNB subunit), the dissociation rate was slowed further to 0.00026 s(-1). From these data we calculate a K(d) for binding of Ca(2+)-saturated CaM to CaN of 28 pM. This K(d) is significantly lower than previously reported estimates of approximately 1 nM and indicates that CaN is one of the highest affinity CaM-binding proteins identified to date.     

Nucleotide binding domain 1 of the human retinal ABC transporter functions as a general ribonucleotidase.

Members of the ATP binding cassette (ABC) superfamily are transmembrane proteins that are found in a variety of tissues which transport substances across cell membranes in an energy-dependent manner. The retina-specific ABC protein (ABCR) has been linked through genetic studies to a number of inherited visual disorders, including Stargardt macular degeneration and age-related macular degeneration (ARMD). Like other ABC transporters, ABCR is characterized by two nucleotide binding domains and two transmembrane domains. We have cloned and expressed the 522-amino acid (aa) N-terminal cytoplasmic region (aa 854-1375) of ABCR containing nucleotide binding domain 1 (NBD1) with a purification tag at its amino terminus. The expressed recombinant protein was found to be soluble and was purified using single-step affinity chromatography. The purified protein migrated as a 66 kDa protein on SDS-PAGE. Analysis of the ATP binding and hydrolysis properties of the NBD1 polypeptide demonstrated significant differences between NBD1 and NBD2 [Biswas, E. E., and Biswas, S. B. (2000) Biochemistry 39, 15879-15886]. NBD1 was active as an ATPase, and nucleotide inhibition studies suggested that nucleotide binding was not specific for ATP and all four ribonucleotides can compete for binding. Further analysis demonstrated that NBD1 is a general nucleotidase capable of hydrolysis of ATP, CTP, GTP, and UTP. In contrast, NBD2 is specific for adenosine nucleotides (ATP and dATP). NBD1 bound ATP with a higher affinity than NBD2 (K(mNBD1) = 200 microm vs K(mNBD2) = 631 microm) but was less efficient as an ATPase (V(maxNBD1) = 28.9 nmol min(-)(1) mg(-)(1) vs V(maxNBD2) = 144 nmol min(-)(1) mg(-)(1)). The binding efficiencies for CTP and GTP were comparable to that observed for ATP (K(mCTP) = 155 microm vs K(mGTP) = 183 microm), while that observed for UTP was decreased 2-fold (K(mUTP) = 436 microm). Thus, the nucleotide binding preference of NBD1 is as follows: CTP > GTP > ATP > UTP. These studies demonstrate that NBD1 of ABCR is a general nucleotidase, whereas NBD2 is a specific ATPase.     

Is the binding of magnesium (II) to calmodulin significant? An investigation by magnesium-25 nuclear magnetic resonance

Previous reports on the interaction between calmodulin (CaM) and Mg2+ range from no binding to a binding constant of 10(4) M-1 [for a summary, see Cox, J. A., Comte, M., Malnoe, A., Berger, D., & Stein, E. A. (1984) Met. Ions Biol. Syst. 17, 215-273]. In order to resolve the controversy, we used 25Mg NMR to study the binding of Mg2+ to apo-CaM, CaM.Ca2(2)+ (in which sites III and IV are occupied by Ca2+), CaM.La2(3)+ (in which sites I and II are occupied by La3+), and the two tryptic fragments of calmodulin, TR1C (containing sites I and II of CaM) and TR2C (containing sites III and IV of CaM). In each system, a "titration set" and a "temperature set" were obtained, and the spectral data were analyzed by total band-shape analysis to calculate the association constant (Ka) and off-rate (koff). As in the case of Ca2+ binding, sites I and II and sites III and IV were treated as two sets of equivalent sites, and a Ca2+/Mg2+ competition experiment suggested that Mg2+ competes with Ca2+ for the same sites. For both CaM.Ca2(2)+ and TR1C, moderately large Ka (2000 and 3500 M-1, respectively) and moderate off-rates (koff = 2300 and 3000 s-1, respectively, at 25 degrees C) were observed. For both CaM.La2(3)+ and TR2C, binding of Mg2+ was weaker by a factor of ca. 10 (Ka = 300 and 200 M-1, respectively) while the off-rates were also moderate (koff = 3500 and 2200 s-1, respectively).(ABSTRACT TRUNCATED AT 250 WORDS)     

Modulation of the stability of rabbit skeletal muscle myosin light chain kinase through the calmodulin-binding domain

The binding of Ca2+(4).calmodulin (CaM) to rabbit skeletal muscle myosin light chain kinase (MLCK) is required for expression of the enzyme's activity. While both MLCK and CaM were stable at 30 degrees C, their complex was not. The binding of CaM to MLCK resulted in a time- and temperature-dependent inactivation that reflected an intrinsic instability of the complex. Separation of the components of the inactive complex yielded functional CaM, but catalytically inert MLCK, indicating that the site of the inactivating event was confined to MLCK. The behavior of proteolytic fragments further localized this event to the C-terminal 60% of the 603-residue protein. Changes in the tryptophan fluorescence and proteolytic susceptibility of MLCK-CaM indicated that a conformational change accompanied, and thus may have caused, inactivation. Substrates protected against inactivation, as did millimolar concentrations of Mg2+, Mn2+, and Ca2+. These metals appeared to bind to a site on MLCK distinct from that which recognized Mg2+.ATP. A proteolytic fragment of MLCK lacking the ability to bind CaM, C beta 35 (residues 255-584; Edelman, A. M., Takio, K., Blumenthal, D. K., Hansen, R. S., Walsh, K. A., Titani, K., and Krebs, E. G. (1985) J. Biol. Chem. 260, 11275-11285), was unstable at 30 degrees C, whereas a similar fragment which does bind CaM, T beta 40 (residues 236-595; Edelman, A. M., Takio, K., Blumenthal, D. K., Hansen, R. S., Walsh, K. A., Titani, K., and Krebs, E. (1985) J. Biol. Chem. 260, 11275-11285), was unstable only when CaM was bound.     

Conformational changes of renal sodium plus potassium ion-transport adenosine triphosphatase labeled with fluorescein

We studied conformational changes of purified renal sodium plus potassium ion-transport adenosine triphosphatase (ATP phosphohydrolase, EC 3.6.1.3) labeled with fluorescein isothiocyanate. Fluorescein covalently binds to the alpha-subunit of the enzyme and inhibits the ATPase but not the p-nitrophenylphosphatase activity. Four unphosphorylated and three phosphorylated conformations were distinguished by the level of fluorescence and by the rate of its change (relative fluorescence is shown in percentages). Fluorescence of the ligand-free form (E1, 100%) was increased by Na+ (E1.Na form, 103%) and quenched by K+ (E2.K, 78%) at a site of high affinity (K0.5 for K+ = 0.07 mM). Mg2+ did not alter fluorescence of E1 or E1.Na but raised that of E2.K (E2.K.Mg form, 85-90%). Addition of excess Na+ to the E2.K.Mg form restored high fluorescence but the rate of transition from E2.K.Mg to E1.Na became progressively slower with increasing Mg2+ concentration. Two phosphorylated conformations, (E2-P).Mg (82%) and (E2-P).Mg.K (82%) were differentiated by a faster turnover of the latter form. A third conformation, (E2-P).Mg.ouabain, had the lowest fluorescence (56%) and its formation allowed the binding of ouabain to the phosphoenzyme. Reversible blocking of sulfhydryl groups with thimerosal inhibited the formation of E2.K and (E2-P).Mg.ouabain but not that of the other conformations of the fluorescein-enzyme. The thimerosal-treated fluorescein-enzyme retained K+-p-nitrophenylphosphatase activity, inhibition of this activity by ouabain and ouabain binding. The unphosphorylated enzyme had low (K0.5 = 1.2 mM) and the phosphoenzyme had high affinity (K0.5 = 0.03 - 0.09 mM) for Mg2+ in the absence of nucleotides. Since low and high affinity for Mg2+ alternates as the enzyme turns over, Mg2+ may be bound and released sequentially during the catalytic cycle.     

The neuronal voltage-dependent sodium channel type II IQ motif lowers the calcium affinity of the C-domain of calmodulin

Calmodulin (CaM) is the primary calcium sensor in eukaryotes. Calcium binds cooperatively to pairs of EF-hand motifs in each domain (N and C). This allows CaM to regulate cellular processes via calcium-dependent interactions with a variety of proteins, including ion channels. One neuronal target is NaV1.2, voltage-dependent sodium channel type II, to which CaM binds via an IQ motif within the NaV1.2 C-terminal tail (residues 1901-1938) [Mori, M., et al. (2000) Biochemistry 39, 1316-1323]. Here we report on the use of circular dichroism, fluorescein emission, and fluorescence anisotropy to study the interaction between CaM and NaV1.2 at varying calcium concentrations. At 1 mM MgCl2, both full-length CaM (CaM1-148) and a C-domain fragment (CaM76-148) exhibit tight (nanomolar) calcium-independent binding to the NaV1.2 IQ motif, whereas an N-domain fragment of CaM (CaM1-80) binds weakly, regardless of calcium concentration. Equilibrium calcium titrations of CaM at several concentrations of the NaV1.2 IQ peptide showed that the peptide reduced the calcium affinity of the CaM C-domain sites (III and IV) without affecting the N-domain sites (I and II) significantly. This leads us to propose that the CaM C-domain mediates constitutive binding to the NaV1.2 peptide, but that interaction then distorts calcium-binding sites III and IV, thereby reducing their affinity for calcium. This contrasts with the CaM-binding domains of voltage-dependent Ca2+ channels, kinases, and phosphatases, which increase the calcium binding affinity of the C-domain of CaM.     

Energetics of target peptide binding by calmodulin reveals different modes of binding

Thermodynamic parameters of interactions of calcium-saturated calmodulin (Ca(2+)-CaM) with melittin, C-terminal fragment of melittin, or peptides derived from the CaM binding regions of constitutive (cerebellar) nitric-oxide synthase, cyclic nucleotide phosphodiesterase, calmodulin-dependent protein kinase I, and caldesmon (CaD-A, CaD-A*) have been measured using isothermal titration calorimetry. The peptides could be separated into two groups according to the change in heat capacity upon complex formation, DeltaC(p). The calmodulin-dependent protein kinase I, constitutive (cerebellar) nitric-oxide synthase, and melittin peptides have DeltaC(p) values clustered around -3.2 kJ.mol(-1).K(-1), consistent with the formation of a globular CaM-peptide complex in the canonical fashion. In contrast, phosphodiesterase, the C-terminal fragment of melittin, CaD-A, and CaD-A* have DeltaC(p) values clustered around -1.6 kJ.mol(-1).K(-1), indicative of interactions between the peptide and mostly one lobe of CaM, probably the C-terminal lobe. It is also shown that the interactions for different peptides with Ca(2+)-CaM can be either enthalpically or entropically driven. The difference in the energetics of peptide/Ca(2+)-CaM complex formation appears to be due to the coupling of peptide/Ca(2+)-CaM complex formation to the coil-helix transition of the peptide. The binding of a helical peptide to Ca(2+)-CaM is dominated by favorable entropic effects, which are probably mostly due to hydrophobic interactions between nonpolar groups of the peptide and Ca(2+)-CaM. Applications of these findings to the design of potential CaM inhibitors are discussed.     

Interaction of cardiac troponin C with calmodulin antagonist [corrected] W7 in the presence of three functional regions of cardiac troponin I

W7 is a well-known calmodulin (CaM) antagonist and has been implicated as an inhibitor of the troponin C-mediated Ca(2+) activation of cardiac muscle contraction. In this study, we use NMR spectroscopy to study binding of W7 to cardiac troponin C (cTnC) free or in complex with cardiac troponin I (cTnI) peptides. Titration of cTnC.3Ca(2+) with W7 shows that residues throughout the sequence, including the N- and C-domains of cTnC and the central linker, are affected. Analysis of the binding stoichiometry and the trajectories of chemical shift changes indicate that W7 binding occurs at multiple sites. To address the issue of whether multiple-site binding is relevant within the troponin complex, W7 is titrated to a cTnC-cTnI complex (cTnC.3Ca(2+).cTnI(34)(-)(71).cTnI(128)(-)(163)). In the presence of the N-terminal (residues approximately 34-71), inhibitory (residues approximately 128-147), and switch (residues approximately 147-163) regions of cTnI, W7 induces chemical shift changes only in the N-domain and not in the C-domain or the central linker of cTnC. The results indicate that in the presence of cTnI, W7 no longer binds to multiple sites of cTnC but instead binds specifically to the N-domain, and the binding (K(D) = 0.5 +/- 0.1 mM) can occur together with the switch region of cTnI. Hence, W7 may play a role in directly modulating the Ca(2+) sensitivity of the regulatory domain of cTnC and the interaction of the switch region of cTnI and cTnC.     

Dynamic motion of helix A in the amino-terminal domain of calmodulin is stabilized upon calcium activation

Calcium-dependent changes in the internal dynamics and average structures of the opposing globular domains of calmodulin (CaM), as well as their relative spatial arrangement, contribute to the productive association between CaM and a range of different target proteins, affecting their functional activation. To identify dynamic structural changes involving individual alpha-helical elements and their modulation by calcium activation, we have used site-directed mutagenesis to engineer a tetracysteine binding motif within helix A near the amino terminus of calmodulin (CaM), permitting the selective and rigid attachment of the fluorescent probe 4',5'-bis(1,3,2-dithioarsolan-2-yl)fluorescein (FlAsH) with full retention of function. The rigid tetracoordinate linkage of FlAsH to CaM, in conjunction with frequency domain fluorescence anisotropy measurements, allows assessment of dynamic changes associated with calcium activation without interference from independent probe motion. Taking advantage of the large fluorescence enhancement associated with binding of FlAsH to CaM, we determined rates of binding of FlAsH to apo-CaM and calcium-activated CaM to be 2800 +/- 80 and 310 +/- 10 M(-)(1) s(-)(1), respectively. There is no difference in the solvent accessibility of the bound FlAsH irrespective of calcium binding to CaM. Thus, given that FlAsH selectively labels disordered structures, the large difference in rates of FlAsH binding indicates that calcium binding stabilizes helix A. Frequency domain anisotropy measurements of bound FlAsH indicate that prior to calcium activation, helix A undergoes large amplitude nanosecond motions. Following calcium activation, helix A becomes immobile, and structurally coupled to the overall rotation of CaM. We discuss these results in the context of a model that suggests stabilization of helix A relative to other domain elements in the CaM structure is critical to defining high-affinity binding clefts, and in promoting specific and ordered binding of the opposing lobes of CaM to target proteins.