Cyanophycin granule polypeptide formation and degradation in the cyanobacterium Aphanocapsa 6308.

The effect of a number of conditions on the amount of cyanophycin granule polypeptide [multi-L-arginyl poly(L-aspartic acid)] formed in the unicellular cyanobacterium Aphanocapsa 6308 was determined. Light, CO2, sulfur, and phosphorus starvation as well as the addition of arginine to culture media increased the amount of cyanophycin granule polypeptide in cells when compared with that in cells grown under conditions optimal for growth. Nitrogen limitation and reduction of growth temperature to 30 degrees C decreased the amount of cyanophycin granule polypeptide on a dry-weight basis. Shift-up and shift-down experiments suggest cyanophycin granule polypeptide may be a reserve nitrogen polymer in Aphanocapsa 6308.     

Biosynthesis of the cyanobacterial reserve polymer multi-L-arginyl-poly-L-aspartic acid (cyanophycin): mechanism of the cyanophycin synthetase reaction studied with synthetic primers.

Biosynthesis of the cyanobacterial nitrogen reserve cyanophycin (multi-L-arginyl-poly-L-aspartic acid) is catalysed by cyanophycin synthetase, an enzyme that consists of a single kind of polypeptide. Efficient synthesis of the polymer requires ATP, the constituent amino acids aspartic acid and arginine, and a primer like cyanophycin. Using synthetic peptide primers, the course of the biosynthetic reaction was studied. The following results were obtained: (a) sequence analysis suggests that cyanophycin synthetase has two ATP-binding sites and hence probably two active sites; (b) the enzyme catalyses the formation of cyanophycin-like polymers of 25-30 kDa apparent molecular mass in vitro; (c) primers are elongated at their C-terminus; (d) the constituent amino acids are incorporated stepwise, in the order aspartic acid followed by arginine, into the growing polymer. A mechanism for the cyanophycin synthetase reaction is proposed; (e) the specificity of the enzyme for its amino-acid substrates was also studied. Glutamic acid cannot replace aspartic acid as the acidic amino acid, whereas lysine can replace arginine but is incorporated into cyanophycin at a much lower rate.     

The effect of chloramphenicol on the production of cyanophycin granule polypeptide in the blue-green alga Anabaena cylindrica

Summary The cyanophycin or structured granule of the blue-green algae is composed of polypeptides which are copolymers of aspartic acid and arginine. The addition of chloramphenicol to an exponentially growing culture of the blue-green alga Anabaena cylindrica at concentrations which completely inhibit protein synthesis results both in the inhibition of growth and in the accumulation of the cyanophycin granule polypeptide (CGP). The chloramphenicol induced increase in CGP content is energy dependent. Removal of the chloramphenicol results in resumption of growth and the hydrolysis of the stored CGP. The data presented indicate that CGP is synthesized via a non-ribosomal system and are consistent with the idea that CGP serves as a cellular nitrogen reserve.     

Variations in the amino acid composition of cyanophycin in the cyanobacterium Synechocystis sp. PCC 6308 as a function of growth conditions

Gas chromatography-mass spectrometry studies of the nitrogen isotopic composition of the N-trifluoroacetyl n-butyl ester derivatives of the amino acids from isolated hydrolyzed cyanophycin from ¹⁵N-enriched cells led to two major findings: (1) the amino acid composition of this granular polypeptide, isolated using procedures optimized for extracting and purifying cyanophycin from cells in the stationary growth phase, varied with the culture growth condition; (2) the rate of incorporation of exogenous nitrate differed for each nitrogen atom of the amino acid constituents of cyanophycin or cyanophycin-like polypeptide. Arginine and aspartic acid were the principle components of cyanophycin isolated from exponentially growing cells and from light-limited stationary phase cells, with glutamic acid as an additional minor component. The cyanophycin-like polypeptide from nitrogen-limited cells contained only aspartic and glutamic acids, but no arginine. The glutamic acid content decreased and arginine content increased as nitrate was provided to nitrogen-limited cells. These cells rapidly incorporated nitrate at different rates at each cyanophycin nitrogen site: guanidino nitrogens of arginine>aspartic acid >-amino nitrogen of arginine>glutamic acid. Little media-derived nitrogen was incorporated into cyanophycin of exponentially growing cells during one cellular doubling time.Abbreviations asp-TAB, glu-TAB, arg-TAB N-Trifluoroacetyl n-butyl ester derivatives of aspartic acid, glutamic acid and arginine, respectively - CAP chloramphenicol - CF correction factor - TFAA Trifluoroacetic anhydride - MBTFA N-Methyl-bis-trifluoroacetamide     

Cyanophycin granule polypeptide protease in a unicellular cyanobacterium

An assay was developed to measure the proteolysis of cyanophycin granule polypeptide in crude extracts of a unicellular cyanobacterium. The substrate was radioactively labeled cyanophycin granule polypeptide formed by an unicellular cyanobacterium grown in the presence of chloramphenicol. Substrate polypeptide displayed identical chemical properties with polypeptide isolated from non-chloramphenicol-treated cells. Solubilization of radioactivity as arginine indicated hydrolysis of polypeptide. Radioactively labeled aspartate and arginine from hydrolyzed polypeptide was related to nmol amino acid using a combination of paper chromatography, liquid scintillation analysis, and ninhydrin quantitation. Protease activity was found in extracts of nitrogen-limited cells harvested 16–24 h after a nitrogen source was added back. Optimal pH for protease activity was 8.0 and optimum temperature was 35°C. Protease activity in crude extracts followed Michaelis-Menten kinetics with a V _max of 92 nmol arginine per 15 min/mg protein and a K _m of 2.1×10³ nmol arginine. Protease activity was inhibited by arginine and by high concentrations of aspartate.     

Pyroglutamyl N-termini of thermal polyamino acids

It has been established indirectly that the N-termini of the thermal polyamino acids are pyroglutamic acid. This was determined by trifluoroacetic acid hydrolysis of the lactam ring followed by Dansyl labelling. The polyamino acids contained Ala, Gly, Glu, Leu, Phe, and Pro. In the experiments described here, the presence of pyroglutamic acid at the N-terminus of a polyamino acid was determined directly by the use of pyrrolidone carboxylyl peptidase. The enzyme catalyzes the removal of pyroglutamyl residues at the N-terminus of polypeptide chains. The polyamino acids used in these studies contained glutamic acid, aspartic acid, alanine, glycine, isoleucine, proline and valine. Alkaline hydrolysis was also used to determine indirectly that the N-termini of these polyamino acids are pyroglutamic acid. Another interesting finding was that many of the amino acids in the polymerization mixture were found to occur penultimate to the N-terminal amino acid. This is interpreted to mean that the diffusible fraction contains many polyamino acids.     

Cyanophycinase, a peptidase degrading the cyanobacterial reserve material multi-L-arginyl-poly-L-aspartic acid (cyanophycin): molecular cloning of the gene of Synechocystis sp. PCC 6803, expression in Escherichia coli, and biochemical characterization of the purified enzyme.

The branched polypeptide multi-L-arginyl-poly-L-aspartic acid, also called cyanophycin, is a water-insoluble reserve material of cyanobacteria. The polymer is degraded by a specific hydrolytic enzyme called cyanophycinase. By heterologous expression in Escherichia coli, a gene encoding cyanophycinase has been identified in the sequenced genome of Synechocystis sp. PCC 6803. The gene, designated cphB, codes for a protein of 29.4 kDa. The high level of expression of active cyanophycinase in E. coli from the Synechocystis gene allowed for its purification to electrophoretic homogeneity. The enzyme, which appears to be specific for cyanophycin, hydrolysed the polymer to a dipeptide consisting of aspartic acid and arginine. Based on inhibitor sensitivity and primary sequence, cyanophycinase appears to be a serine-type exopeptidase related to dipeptidase E [Conlin, C.A., Haakensson, K., Liljas, A. & Miller, C.G. (1994) J. Bacteriol. 176, 166-172].     

Accumulation of Cyanophycin Granules as a Result of Phosphate Limitation in Agmenellum quadruplicatum

Phosphate-limited growth of the blue-green alga Agmenellum quadruplicatum resulted in the accumulation of cyanophycin granule polypeptide (CGP), which is a 1:1 co-polymer of aspartic acid and arginine. The progressive accumulation of CGP began after depletion of phosphate from the medium. CGP increased in concentration much faster than the increase in cell number. Electron microscopy indicated that both the number of cyanophycin granules per cell section and the diameter of each granule increased as phosphate starvation progressed. A marked decrease in the electron density of the inter-thylakoidal areas took place concurrently with the accumulation of CGP. At the same time a progessive decrease in the pigment concentration of cells and in the rate of nitrate uptake was observed. Thirty-two hours after phosphate depletion from the medium up to 28% of total cellular nitrogen was found in CGP.     

Isolation of cyanophycin-degrading bacteria, cloning and characterization of an extracellular cyanophycinase gene (cphE) from Pseudomonas anguilliseptica strain BI. The cphE gene from P. anguilliseptica BI encodes a cyanophycinhydrolyzing enzyme

Eleven bacteria capable of utilizing cyanophycin (cyanophycin granule polypeptide (CGP)) as a carbon source for growth were isolated. One isolate was taxonomically affiliated as Pseudomonas anguilliseptica strain BI, and the extracellular cyanophycinase (CphE) was studied because utilization of cyanophycin as a carbon source and extracellular cyanophycinases were hitherto not described. CphE was detected in supernatants of CGP cultures and purified from a corresponding culture of strain BI employing chromatography on the anion exchange matrix Q-Sepharose and on an arginine-agarose affinity matrix. The mature form of the inducible enzyme consisted of one type of subunit with M(r) = 43,000 and exhibited high specificity for CGP, whereas proteins and synthetic polyaspartic acid were not hydrolyzed or were only marginally hydrolyzed. Degradation products of the enzyme reaction were identified as aspartic acid-arginine dipeptides (beta-Asp-Arg) by high performance liquid chromatography and electrospray ionization mass spectrometry. The corresponding gene (cphE, 1254 base pairs) was identified in subclones of a cosmid gene library of strain BI by heterologous active expression in Escherichia coli, and its nucleotide sequence was determined. The enzyme exhibited only 27-28% amino acid sequence identity to intracellular cyanophycinases occurring in cyanobacteria. Analysis of the amino acid sequence of cphE revealed a putative catalytic triad consisting of the motif GXSXG plus a histidine and most probably a glutamate residue. In addition, the strong inhibition of the enzyme by Pefabloc((R)) and phenylmethylsulfonyl fluoride indicated that the catalytic mechanism of CphE is related to that of serine type proteases. Quantitative analysis on the release of beta-Asp-Arg dipeptides from C-terminal labeled CGP gave evidence for an exo-degradation mechanism.     

Assessments of growth conditions on the production of cyanophycin by recombinant Escherichia coli strains expressing cyanophycin synthetase gene

The synthesis of cyanophycin, a biodegradable polymer, is directed by cyanophycin synthetase. Polymerase chain reaction (PCR) cloned the gene cphA coding for cyanophycin synthetase from Synechocystis sp. PCC 6803 into pET-21b followed by transformation into two Escherichia coli hosts. The culture conditions for cyanophycin production were investigated, and the molecular weight and compositions of purified cyanophycin were analyzed. The results showed that E. coli BL21-CodonPlus(DE3)-RIL could produce 120 mg cyanophycin per gram dry cell weight in terrific medium. The purified cyanophycin consisted of insoluble and soluble forms at pH 7. The insoluble form had a higher molecular weight (20-32 kDa) than the soluble form (14-25 kDa). Both forms are composed of three major amino acids, aspartic acid, arginine, and lysine, and the insoluble form showed a higher arginine/lysine molar ratio (4.61 ± 0.31) than the soluble form (0.89 ± 0.05). In addition, the nitrogen sources could affect the yields of insoluble and soluble forms of cyanophycin. The medium containing additional lysine could enhance the proportion of the soluble form, but had little effect on the lysine and arginine percentages of both soluble and insoluble forms. The medium containing additional arginine slightly decreased the proportion of soluble form and altered its amino acid composition, with a minimal effect on the lysine and arginine percentages in the insoluble form.     

Nitrogen limitation and recovery in the cyanobacterium Aphanocapsa 6308

The effects of nitrogen limitation and recovery on nitrogen-containing macromolecules were followed in the cyanobacterium Aphanocapsa 6308. Removal of nitrogen from growth media triggers the degradation of the endogenous nitrogen reserves phycocyanin and cyanophycin granule polypeptide in the cyanobacterium Aphanocapsa 6308. Nitrogen recovery involves immediate synthesis of cyanophycin granule polypeptide with peak levels of 5–12% of cell dry weight found 8–12 h after a utilizable nitrogen source is added. A rapid decrease in cyanophycin granule polypeptide level then occurs and the level remains low even in light-limited stationary growth with all nitrogen sources tested except nitrate and ammonia. Protein and phycocyanin recoveries began 3 h after a utilizable nitrogen source was added. Data suggest continuous activity of the enzyme system synthesizing cyanophycin granule polypeptide in nitrogen-limited cells, but synthesis of a degrading system only after nitrogen recovery begins.Nonstandard Abbreviations CGP Cyanophycin granule polypeptide - CAP chloramphenicol - PC phycocyanin To whom offprint requests should be sent     

Production of cyanophycin in <Emphasis Type="Italic">Rhizopus oryzae</Emphasis> through the expression of a cyanophycin synthetase encoding gene

Cyanophycin or cyanophycin granule peptide is a protein that results from non-ribosomal protein synthesis in microorganisms such as cyanobacteria. The amino acids in cyanophycin can be used as a feedstock in the production of a wide range of chemicals such as acrylonitrile, polyacrylic acid, 1,4-butanediamine, and urea. In this study, an auxotrophic mutant (Rhizopus oryzae M16) of the filamentous fungus R. oryzae 99-880 was selected to express cyanophycin synthetase encoding genes. These genes originated from Synechocystis sp. strain PCC6803, Anabaena sp. strain PCC7120, and a codon optimized version of latter gene. The genes were under control of the pyruvate decarboxylase promoter and terminator elements of R. oryzae. Transformants were generated by the biolistic transformation method. In only two transformants both expressing the cyanophycin synthetase encoding gene from Synechocystis sp. strain PCC6803 was a specific enzyme activity detected of 1.5 mU/mg protein. In one of these transformants was both water-soluble and insoluble cyanophycin detected. The water-soluble fraction formed the major fraction and accounted for 0.5% of the dry weight. The water-insoluble CGP was produced in trace amounts. The amino acid composition of the water-soluble form was determined and constitutes of equimolar amounts of arginine and aspartic acid.     

Site-directed mutagenesis of the FAD-binding histidine of 6-hydroxy-D-nicotine oxidase. Consequences on flavinylation and enzyme activity

In 6-hydroxy-D-nicotine oxidase (6-HDNO) FAD is covalently bound to His71 of the polypeptide chain by an 8 alpha-(N3-histidyl)-riboflavin linkage. The FAD-binding histidine was exchanged by site-directed mutagenesis to either a Cys- or Tyr-residue, two amino acids known to be involved in covalent binding of FAD in other enzymes, or to a Ser-residue. None of the amino acid replacements for His71 allowed covalent FAD incorporation into the 6-HDNO polypeptide. Thus, the amino acid residues involved in covalent FAD-binding require a specific polypeptide surrounding in order for this modification to proceed and cannot be replaced with each other. Enzyme activity was completely abolished with Tyr in place of His71. 6-HDNO activity with non-covalently bound FAD was found with 6-HDNO-Cys and to a lesser extent also with 6-HDNO-Ser. However, the Km values for 6-HDNO-Cys and 6-HDNO-Ser were increased approximately 20-fold as compared to 6-HDNO-His. Both mutant enzymes, in contrast to the wild-type enzyme, needed additional FAD in the enzymatic assay (50 microM for 6-HDNO-Ser and 10 microM for 6-HDNO-Cys) for maximal enzyme activity.     

Implication of arginyl residues in mRNA binding to ribosomes

Modification of Escherichia coli robosomes with phenylglyoxal and butanedione, protein reagents specific for arginyl residues, inactivates polypeptide polymerization, assayed as poly(U)-dependent polyphenylalanine synthesis, and the binding of poly(U). Inactivation is produced by modification of the 30-S subunit. Both the RNA and the protein moieties of 30-S subunits are modified by phenylglyoxal, and modification of either of them is accompanied by inactivation of polypeptide synthesis. Modification of only the split proteins released from 30-S subunits by prolonged dialysis against a low-ionic-strength buffer, which contain mainly protein S1, produces inhibition of poly(U) binding and inactivation of polypeptide synthesis. Amino acid analysis of the modified split proteins showed a significant modifications of arginyl residues. These results indicate that the arginyl residues of a few 30-S proteins might be important in the interaction between mRNA and the 30-S subunit, which agrees with the general role assigned to the arginyl residues of proteins as the positively charged recognition site for anionic ligands.     

Features of the biotechnologically relevant polyamide family “cyanophycins” and their biosynthesis in prokaryotes and eukaryotes

Cyanophycin, inclusions in cyanobacteria discovered by the Italian scientist Borzi in 1887, were characterized as a polyamide consisting of aspartic acid and arginine. Its synthesis in cyanobacteria was analyzed regarding growth conditions, responsible gene product, requirements, polymer structure and properties. Heterologous expression of diverse cyanophycin synthetases (CphA) in Escherichia coli enabled further enzyme characterization. Cyanophycin is a polyamide with variable composition and physiochemical properties dependent on host and cultivation conditions in contrast to the extracellular polyamides poly-γ-glutamic acid and poly-ε-l-lysine. Furthermore, recombinant prokaryotes and transgenic eukaryotes, including plants expressing different cphA genes, were characterized as suitable for production of insoluble cyanophycin regarding higher yields and modified composition for other requirements and applications. In addition, cyanophycin was characterized as a source for the synthesis of polyaspartic acid or N-containing bulk chemicals and dipeptides upon chemical treatment or degradation by cyanophycinases, respectively. Moreover, water-soluble cyanophycin derivatives with altered amino acid composition were isolated from transgenic plants, yeasts and recombinant bacteria. Thereby, the range of dipeptides could be extended by biological processes and by chemical modification, thus increasing the range of applications for cyanophycin and its dipeptides, including agriculture, food supplementations, medical and cosmetic purposes, synthesis of the polyacrylate substitute poly(aspartic acid) and other applications.     

The biosynthesis of multi-L-arginyl-poly(L-aspartic acid) in the filamentous cyanobacterium Anabaena cylindrica.

The cyanobacteria produce multi-L-arginyl-poly (aspartic acid), a high molecular weight (Mr=25 000-125 000) branched polypeptide consisting of a poly(aspartic acid) core with L-arginyl residues peptide bonded to each free carboxyl group of the poly(aspartic acid). An enzyme which will elongate Arg-poly(Asp) has been isolated and purified 92-fold from the filamentous cyanobacterium Anabaena cylindrica. The enzyme incorporates arginine and aspartic acid into Arg-poly(Asp) in a reaction which requires ATP, KCl, MgCl2, and a sulfhydryl reagent. The enzymatic incorporation of arginine is dependent upon the presence of L-aspartic acid but not visa versa, a finding which suggests the order of amino acid addition to the branched polypeptide-aspartic acid is added to the core followed by the attachment of an arginine branch. The elongation of Arg-poly(Asp) in-vitro is insensitive to the addition of protein synthesis inhibitors and to the addition of nucleases. These findings support the notion previosly suggested from in-vivo studies that Arg-poly(Asp) is synthesized via a non-ribosomal route and also demonstrate that amino-acetylated transfer-RNAs play no part in at least one step of the biosynthetic mechanism.     

Purification by preparative electrophoresis and characterization of histone H2D from rat chloroleukaemia

Highly purified histone H^2B from rat chloroleukaemia has been isolated by preparative electrophoresis at pH 2.7 in polyacrylamide slab gel, using the fraction F_2b of Johns (Johns E. W. (1964) Biochem. J. 92, 55–59) as starting material. This histone was characterized by amino acid analysis and end groups determination.Comparative studies with homologous calf thymus histone show similarity of the amino acid compositions and of the amino terminal groups. The car☐yl terminal sequence presents two conservative substitutions.     

Application of the reaction of dithioesters with ε-amino groups in lysine to the chemical modification of proteins

The reaction of lysine with dithioesters was applied to horseradish peroxidase donor: hydrogen-peroxide oxidoreductase, EC 1.11.1.7) using car☐ymethyl dithiotridecanoate: three to four lysine residues were modified. The modified enzyme was soluble and active in diethyl ether. Papain (EC 3.4.22.2) was modified with car☐ymethyl dithiobenzoate: two lysine residues were modified. The modified enzyme was soluble and active in dimethylsulfoxide. From these results it is concluded that dithioesters are efficient reagents for the modification of peripheral lysine residues of proteins. Aromatic dithioesters, less reactive but more selective, should be recommended for thiol-dependent enzymes such as papain.     

Inclusion of nonproteinous amino acids in thermally prepared models for prebiotic protein

Sixteen nonproteinous amino acids (those not coded for in contemporary protein biosynthesis) were incorporated during the thermal formation of polyamino acids under postulated prebiotic conditions, although not all into a single polyamino acid. The copresence of proteinous or even α-amino acids was not required. (Norleucine color equivalents and elution times on a Beckman model 120C amino acid analyzer were determined for these nonproteinous amino acids). The results suggest that prebiotically available nonproteinous amino acids would have been constituents of prebiotic protein if the latter were formed thermally. Some differences in properties of the polyamino acids could be attributed to particular nonproteinous amino acid residues; however, the tested properties did not suggest a means for evolutionary selection against nonproteinous amino acids as a group. Selection against this class of amino acids in toto was likely a later, biotic, event.     

Measurement of the Cyanophycin Granule Polypeptide Contained in the Blue-Green Alga Anabaena cylindrica

An assay was developed to determine the amount of cyanophycin granules in blue-green algae. The amount of this polypeptide in cells of Anabaena cylindrica was measured as a function of culture age and was compared with changes in other proteinaceous cellular components. The data presented support the notion that the cyanophycin granule is a cellular nitrogen reserve.