A novel isolate of <Emphasis Type="Italic">Clostridium butyricum</Emphasis> for efficient butyric acid production by xylose fermentation

Bacterial fermentation of lignocellulose has been regarded as a sustainable approach to butyric acid production. However, the yield of butyric acid is hindered by the conversion efficiency of hydrolysate xylose. A mesophilic alkaline-tolerant strain designated as Clostridium butyricum B10 was isolated by xylose fermentation with acetic and butyric acids as the principal liquid products. To enhance butyric acid production, performance of the strain in batch fermentation was evaluated with various temperatures (20–47 °C), initial pH (5.0–10.0), and xylose concentration (6–20 g/L). The results showed that the optimal temperature, initial pH, and xylose concentration for butyric acid production were 37 °C, 9.0, and 8.00 g/L, respectively. Under the optimal condition, the yield and specific yield of butyric acid reached about 2.58 g/L and 0.36 g/g xylose, respectively, with 75.00% butyric acid in the total volatile fatty acids. As renewable energy, hydrogen was also collected from the xylose fermentation with a yield of about 73.86 mmol/L. The kinetics of growth and product formation indicated that the maximal cell growth rate (μ _m ) and the specific butyric acid yield were 0.1466 h^?1 and 3.6274 g/g cell (dry weight), respectively. The better performance in xylose fermentation showed C. butyricum B10 a potential application in efficient butyric acid production from lignocellulose.     

The role of acids on the production of acetone and butanol by Clostridium acetobutylicum

Summary The production of solvent by Clostridium acetobutylicum was studied, using fed-batch fermentations. Different specific rates of carbohydrate utilisation were obtained by variations in feeding rates of sugar. At slow catabolic rates of sugar, addition of acetic acid or butyric acid, alone or together, increased the rate of the metabolic transition by a factor 10 to 20, the amount of solvents by a factor 6 and the percentage of fermented glucose to solvents by a factor 3. The same results were obtained with both glucose and xylose fermentations. Depending on the rates of growth, butanol production began at acid levels of 3–4 g·l^-1 for fast metabolism and at acid levels of 8–10 g·l^-1 for slow metabolism. Associated with slow metabolism, reassimilation of acids required values as high as 6.5 g·l^-1 of acetic acid and 7.5 g·l^-1 of butyric acid. At a high rate of metabolism, acetic and butyric acids were reassimilated at concentrations of 4.5 g·l^-1.     

The growth of Pseudomonas putida on m-toluic acid and on toluene in batch and in chemostat cultures

Summary The present study describes the growth of Pseudomonas putida cells (ATCC 33015) in batch and continuous cultures on two toxic substrates; toluene and m-toluic acid as sole carbon and energy sources. In fed-batch cultures on m-toluic acid up to 3.55 g cell dry weight/1 were achieved with a maximal specific growth rate (_max) of 0.1 h^-1. The average cellular yield was 1.42 g cell dry weight/g m-toluic acid utilized. When liquid toluene was added to shake-flask cultures in the presence of 0.7 g/1 m-toluic acid, the average cellular yield obtained was 1.3 g cell dry weight/g toluene utilized and the _max was 0.13 h^-1. Growth on toluene vapour in the presence of 0.7 g/l m-toluic acid in batch cultures resulted in a cellular yield of 1.28 g cell dry weight/g toluene utilized, with growth kinetics almost identical to those with liquid toluene (_max liquid=0.13 h^-1, _max vapour=0.12 h^-1). The maximal biomass concentration was 3.8 g cell dry weight/l, obtained in both cases after 100 h of incubation. Pseudomonas putida was grown in a chemostat initially on 0.7 g/l m-toluic acid and vapour toluene and then in the steady state on toluene as the sole source of carbon and energy. Toluene was added continuously to the culture as vapour with the inflowing airstream. Chemostat cultures could be maintained at steady state for several months on toluene. The maximal biomass concentration obtained in the chemostat culture was 3.2 g cell dry weight/l. The maximum specific growth rate was 0.13 h^-1, with a cellular yield of 1.05 g cell dry weight/g toluene utilized. Approximately 70% of the toluene consumed was converted into biomass, and the remainder was converted to CO₂ and unidentified byproducts.     

Optimized production of L-β-hydroxybutyric acid by a mutant of Yarrowia lipolytica

A mutant strain of Yarrowia lipolytica was developed which produced 8.0 g l--hydroxybutyric acid l^–1 from butyric acid in a batch culture. The optimum culture conditions in the fermenter for maintenance of a high cell activity, determined by chemostat analyses, were a specific growth rate of 0.06 h^–1, a glucose concentration of 2.0 g l^–1, and a butyric acid concentration of 8.1 g l^–1. A fed-batch fermentation was performed under these conditions resulting in an l--hydroxybutyric acid yield of 31 g l^–1.     

Invertase and phosphatase of yeast in a phosphate-limited continuous culture

Summary Deficiency of inorganic phosphate caused the hyper production of invertase and the derepression of acid phosphatase in a continuous culture ofSaccharomyces carlsbergensis. The specific invertase activity was 40,000 enzyme units per g dry cell weight at a dilution rate lower than 0.05 h^–1 with a synthetic glucose medium of which the molecular ratio of KH₂PO₄ to glucose was less than 0.006. This activity is eight fold higher than in a batch growth and 1.5 fold as much as the highest enzyme activity observed so far in a glucose-limited continuous culture.For the hyper production of invertase, it is necessary to culture the yeast continuously by keeping the Nyholm's conservative inorganic phosphate concentration at less than 0.2 m mole per g dry weight cell. The derepression of acid phosphatase brought about by phosphate deficiency, was similar in both batch and continuous cultures.Nomenclature D dilution rate of continuous culture (h^–1) - E_i invertase concentration in culture (enzyme unit l^–1) - E_p acid phosphatase concentration in culture (enzyme unit l^–1) - P inorganic phosphate concentration in culture (mM) - S glucose concentration in culture (mM) - X cell concentration in culture (g dry weight cell l^–1) Greek Letter specific rate of growth (h^–1) Suffix f feed - 0 initial value     

Butyric fermentation: metabolic behaviour and production performance of Clostridium tyrobutyricum in a continuous culture with cell recycle

Summary Two physiological characteristics of butyric fermentation, inhibition by the acids produced, butyrate and acetate, and dependence on the growth rate of the distribution of these acids, prompted a study of butyrate production in a continuous fermentation system with cell recycle by microfiltration. The influence of the main operating parameters, glucose input (feed concentration and dilution rate) and bleed dilution rate on production of acids and biomass was studied. The performance of the system greatly exceeded the results obtained in batch and simple continuous fermentations as a high productivity for butyrate (9.5 g l^–1 h^–1) was achieved whilst retaining a satisfactory concentration of butyrate (29.7 g l^–1) and low acetate production (0.6 g l^–1) at a cell biomass concentration of 35 g l^–1. Cell growth rate was found to be a critical parameter for performance stability as oscillations in metabolic activity due to inhibition by acids were observed at bleed dilution rates below 0.016 h^–1.Offprint requests to: J. P. Vandecasteele     

Influence of amino acid supplements on the metabolism of Clostridium acetobutylicum

The effects of organic nitrogen on the metabolism of Clostridium acetobutylicum were investigated in batch fermentations. For this study, amino acids were added to a chemically defined medium in groups from the same biosynthetic pathways. In all cases the addition of amino acids shifted the solvent ratio to higher butanol production at the expense of that of acetone (except for the glutamic acid group) and ethanol (except for histidine). Highest biomass production was obtained from media containing aromatic amino acids and histidine (4.57 g · l⁻¹ and 5.4 g · l⁻¹, respectively). However, the solvent production (ca. 20 g · l⁻¹) and the solvent yield (ca. 33%) in both cases, were similar to those obtained from the synthetic medium. Lower values were obtained from fermentations carried out with other families of amino acids. The strongest inhibition of cell growth (1.13 g · l⁻¹) which related to the lowest solvent production (3.15 g · l⁻¹) was observed on a medium complemented with amino acids of the pyruvic acid group. During the second phase of fermentation, amino acids-complemented media caused a less efficient remetabolization of acetic and butyric acids. Highest production of acids was obtained with the aspartic acid group (7.4 g · l⁻¹). These observations suggest that amino acids can be used as a competitive nitrogen source and also modify the level of enzyme activities involved in acid and solvent production.     

Production of butanol by Clostridium puniceum in batch and continuous culture

Summary The pink-pigmented, amylolytic and pectinolytic bacterium Clostridium puniceum in anaerobic batch culture at pH 5.5 and 25–30°C produced butan-1-ol as the major product of fermentation of glucose or starch. The alcohol was formed throughout the exponential phase of growth and surprisingly little acetone was simultaneously produced. Furthermore, acetic and butyric acids were only accumulated in low concentrations, and under optimal conditions were completely re-utilised before the fermentation ceased. Thus, in a minimal medium containing 4% w/v glucose as sole source of carbon and energy, after 65 h at 25°C, pH 5.5 all of the glucose had been consumed to yield (g product/100 g glucose utilised) butanol 32, acetone 3 and ethanol 2. Butanol was again the major product of glucose fermentation during phosphate-limited chemostat culture wherein, although the organism eventually lost its capacity to sporulate and to synthesize granulose, production of butanol continued for at least 100 volume changes. Under no growth condition was the organism capable of producing more than 13.3 g l^-1 of butanol. At pH 5.5, growth on pectin was slow and yielded a markedly lesser biomass concentration than when growth was on glucose or starch; acetic acid was the major fermentation product with lower concentrations of methanol, acetone, butanol and butyric acid. At pH 7, growth on all substrates produced virtually no solvents but high concentrations of both acetic and butyric acids.     

Improvement of 5-aminolevulinic acid production by Rubrivivax benzoatilyticus PS-5 with self-flocculation by co-fermentation of precursors and volatile fatty acids under pH-controlled conditions

Photosynthetic bacteria are known to utilize volatile fatty acids as a carbon source for growth and product formation. In this study, a new isolate, Rubrivivax benzoatilyticus PS-5, possessing self-flocculation properties, was cultivated in modified glutamate-malate (GM) medium containing glutamate and malate as carbon sources. The effect of acetic acid, propionic acid and butyric acid (at 1–4 g L^?1) as co-substrates and 7.5 mM glycine, 10 mM succinic acid as precursors for 5-aminolevulinic acid (ALA) production from R. benzoatilyticus PS-5 was investigated. Among the volatile fatty acids tested, acetic acid was preferred to butyric acid and propionic acid, with the optimum concentrations of 3 g L^?1, 1 g L^?1 and 3 g L^?1, respectively. The highest ALA production was 169.71 μM, 162.16 μM and 46.18 μM, respectively, while the highest productivity was 2.57 μM h^?1, 2.25 μM h^?1 and 0.96 μM h^?1, respectively. The precursor was consumed completely (100 %) while the assimilation of the acetic acid and butyric acid was 62.50 % and 48.65 %, respectively. Supplementation of propionic acid (at 1–4 g l^?1) had a negative effect on growth and ALA production. To increase production efficiency, the pH-control strategy (at pH 6.0–8.0) during fermentation was tested. The optimum pH was 7.0, giving the maximum ALA production of 286.18 μM and a productivity of 3.97 μM h^?1. These values were 1.68-fold and 1.54-fold higher, respectively, than those under uncontrolled pH conditions.     

Isolation of dipicolinic acid as an insecticidal toxin from Paecilomyces fumosoroseus

Several entomopathogenic fungi produce toxins that could be used as bioinsecticides in integrated pest management programs. Paecilomyces fumosoroseus is currently used for the biological control of the whiteflies Bemisia tabaci and B. argentifolii. Supernatants from submerged batch culture, where the fungus produced abundant dispersed mycelium, conidia and blastospores, were toxic to the whitefly nymphs. The most abundant metabolite was purified by HPLC and identified by mass spectrometry and NMR as dipicolinic acid. Both the dipicolinic acid produced by the fungus and the chemically synthesized compound had insecticidal activity against third-instar nymphs of the insect. Dipicolinic acid was toxic to the whitefly nymphs in bioassays involving topical applications. In submerged culture, the specific growth rate of P. fumosoroseus was 0.054 h⁻¹, the specific glucose consumption rate was 0.1195 g g⁻¹ h⁻¹ and the specific dipicolinic acid production rate was 0.00012 g g⁻¹ h⁻¹. Dipicolinic acid was detected after 24 h when the fungus started growing; and dipicolinic acid production was directly correlated with fungal growth. Nevertheless, the yield was low and the maximal concentration was only 0.041 g l⁻¹. The maximal concentrations of conidia and blastospores (per milliliter) were 1.4×10⁸ and 7×10⁷, respectively.     

Ethanol production from glucose byClostridium thermosaccharolyticum strains: Effect of pH and temperature

Summary The fermentation of glucose byClostridium thermosaccharolyticum strains IMG 2811^T, 6544 and 6564 was studied in batch culture in a complex medium at different temperatures in defined and free-floating pH conditions. All the strains ferment 5 g glucose.l^–1 completely. The yield of the fermentation products turned out to be independent of the incubation temperature for strain IMG 2811^T. Strain IMG 6544 produced at 60°C significantly more ethanol and less acetic acid, butyric acid, hydrogen gas and biomass than at lower temperatures. With strain IMG 6564, the opposite effect occurred: ethanol appeared to be the main fermentation product at 45°C; at 60°C less ethanol and more acetic acid, butyric acid and hydrogen gas was formed.Experiments, carried out with strain IMG 6564, at defined pH conditions (between 5.5 and 7) and different temperatures (45, 55 and 60°C) revealed no effect of the incubation temperature, but an important effect of the pH on the product formation. At pH 7, ethanol was the main fermentation product while minor amounts of hydrogen gas, acetic and butyric acid were produced. Lowering the pH gradually to 5.5 resulted in a decrease of ethanol and an increase of biomass, hydrogen gas, acetic, butyric and lactic acids. At pH higher than 7 no growth occurred. Similar conclusions could be drawn for strains IMG 2811^T and 6544.     

The aerobic growth and product formation of Lactobacillus,Leuconostoc, Brochothrix,and Carnobacterium in batch cultures

Summary The aerobic growth and metabolism of eleven homofermentative and three heterofermentative Lactobacillus strains, three Leuconostoc strains, two Brochothrix thermosphacta strains and two Carnobacterium strains were studied in batch cultures at pH 6.0 and 25°C on a complex substrate containing 10.0 g glucose per litre. All strains, except Carnobacterium divergens 69, grew well aerobically. An oxygen consumption was registered for 18 of the strains—the exceptions being Lactobacillus alimentarius DSM 20249^T, Lactobacillus farciminis DSM 20284^T and Lactobacillus sharpeae DSM 20505^T. The homofermentative lactobacilli showed a maximal oxygen consumption during the stationary growth phase and this was coupled with a low final viable count. Leuconostoc strains, heterofermentative lactobacilli, Brochothrix thermosphacta and Carnobacterium strains showed a maximal oxygen consumption during the exponential growth phase together with a high final viable count. The maximum specific growth rate varied from 0.19 to 0.54 h^-1 while the growth yield varied from 19 to 86 g dry weight per mol glucose consumed. In general, homofermentative lactobacilli produced dl-lactic acid, acetic acid and acetoin. The three heterofermentative lactobacilli produced dl-lactic acid and acetic acid, two strains also produced ethanol Leuconostoc spp. formed d-lactic acid, acetic acid, and ethanol. B. thermosphacta produced acetoin, acetic acid, formic acid, isobutyric acid and isovaleric acid but no lactic acid. Carnobacterium produced l-lactic acid, acetic acid and acetoin. All strains accumulated hydrogen peroxide except L. alimentarius DSM 20249^T, Carnobacterium piscicola 3 and B. thermosphacta.née Blickstad     

The production of hemicellulose-degrading enzymes byBacillus macerans in anaerobic culture

Summary The cell-associated and exocellular hemicellulolytic polysaccharide depolymerase and glycoside hydrolase activity ofBacillus macerans NCDO 1764 was monitored over a range of anaerobic growth conditions in batch and continuous culture. The enzymes were detectable throughout the complete growth cycle in batch culture reaching and maintaining maximum levels in the stationary phase. In continuous culture enzyme activity was largely independent of growth rate (D=0.025–0.1 h^-1) although the activity was reduced at higher dilution rates (0.125–0.15 h^-1). Although activity was detectable over a wide pH range (pH 5.5–7.5) it was pH dependent, and maximum activities of both the cell-associated and exocellular enzymes were measured in cultures maintained at pH 6.5–7.0±0.1.The principal metabolites formed anaerobically from xylose byB. macerans in batch and continuous culture were acetic acid, formic acid and ethanol which represented 95–99% of the products formed. Smaller amounts of acetone,d,l-lactic acid and succinic acid were formed together with traces of butyric acid (<5 nmol/ml) and isovaleric acid (<25 nmol/ml). The proportions of the metabolites produced varied with growth conditions and were influenced by the pH of the culture and the rate and stage of growth of the microorganism.     

Prodigiosin formation by Serratia marcescens in a chemostat

In a study of the control of metabolite formation, prodigiosin production by Serratia marcescens was used as a model. Specific production rates of prodigiosin formation were determined using batch culture technique. Sucrose as carbon source and NH₄NO₃ as nitrogen source resulted in a specific production rate of 0.476 mg prodigiosin (g cell dry weight)⁻¹ h⁻¹. Prodigiosin formation and productivity was inversely correlated to growth rate when the bacterium was grown under carbon limitation on a defined medium in a chemostat culture. The maximum specific growth rate (μ_max) was 0.54 h⁻¹ and prodigiosin was formed in amounts over 1 mg l⁻¹ up to a growth rate (μ) of 0.3 h⁻¹ at steady state conditions. At a dilution rate of 0.1 h⁻¹ growth at steady state with carbon and phosphate limitation supported prodigiosin formation giving a similar specific yield [1.17 mg prodigiosin (g cell dry weight)⁻¹ and 0.94 mg g⁻¹, respectively], however, cells grown with nitrogen limitation [(NH₄)₂SO₄] did not form prodigiosin. Productivity in batch culture was 1.33 mg l⁻¹ h⁻¹ as compared to 0.57 mg l⁻¹ h⁻¹ in the chemostat.     

Propionic acid production by immobilized cells of a propionate-tolerant strain of Propionibacterium acidipropionici

Cells of the propionate-tolerant strain Propionibacterium acidipropionici P200910, immobilized in calcium alginate beads, were tested for propionic and acetic acid production both in a semidefined laboratory medium and in corn steep liquor in batch, fed-batch, and continuous fermentation. Cell density was about 9.8 × 10⁹ cells/g (wet weight) of beads, and beads were added to the medium at 0.1 g (wet weight) beads/ml. Beads could be reused for several consecutive batch fermentations; propionic acid production in the tenth cycle was about 50%–70% of that in the first cycle. In batch culture complete substrate consumption (glucose in semidefined medium, lactate in corn steep liquor) and maximum acid production were seen within 36 h, and acid yields from the substrate were higher than in free-cell fermentations. Fed-batch fermentations were incubated up to 250 h. Maximum propionic acid concentrations obtained were 45.6 g/l in corn steep liquor and 57 g/l in semidefined medium; this is the highest concentration achieved to date in our laboratory. Maximum acetic acid concentrations were 17 g/l and 12 g/l, respectively. In continuous fermentation of semidefined medium, dilution rates up to 0.31 h^–1 could be used, which gave higher volumetric productivities (0.96 g l^–1 h^–1 for propionic acid and 0.26 g l^–1 h^–1 for acetic acid) than we have obtained with free cells. Corn steep liquor shows promise as an inexpensive medium for production of both acids by immobilized cells of propionibacteria.Journal paper no. J- 15614 of the Iowa Agriculture and Home Economics Experiment Station, Ames, Iowa. Project no. 3122     

Characterization of anaerobic microbial culture with high acidogenic activity

The mixed cultures which were used were isolated from municipal sludge digesters, and the production of organic acids (acetic, propionic, butyric, etc.) from carbohydrates was tested. The behavior of the reference population (culture R) obtained directly from the sewage treatment plant, is compared to that obtained after three months in a plug-flow reactor (Gradostat fermentor) without pH control (culture A) and after six months with pH control (culture B). For culture B, the specific rate of acid production is related to the cell growth rate by (1/X)r_p= 17 µ + 1.6 with a maximal acid concentration of 40 g/liter. The batch culture yields are improved from 0.36g/g for the initial culture (R) to 0.72 g/g for culture B after six months in continuous culture, and 0.8 g/g in plug-flow continuous culture. The productivity of organic acids reaches 1.7 g/liter·hr. It is suggested that the acidogenic fermentation, the first step of methanogenesis, is a potential process to produce acetic, propionic, and butyric acids.     

Influence of growth factor supplements on butyric acid production from sucrose byClostridium butyricum

During batch fermentation of sucrose to butyric acid byClostridium butyricum the effect of growth factor supplementation was determined: addition of yeast extract (5 g/L) stimulated most. Using biotin as the sole growth factor, average productivity was definitely lower. Beet molasses as a combined source of carbon and growth factor were effective only at a high concentration (150 g/L). The optimal butyric acid production (45 g/L, yield 45%) was achieved with sucrose concentration of 100 g/L in a medium supplemented with yeast extract (5 g/L). It represents an average productivity of 0.90 gL⁻¹ h⁻¹ and relative butyric acid concentration of 91%.     

Poly(β-hydroxybutyric acid) thermoplastic production by Alcaligenes latus: Behavior of fed-batch cultures

Fed-batch culture of Alcaligenes latus, ATCC 29713, was investigated for producing the intracellular bioplastic poly(β–hydroxybutyric acid), PHB. Constant rate feeding, exponentially increasing feeding rate, and pH-stat fed batch methods were evaluated. pH-stat fed batch culture reduced or delayed accumulation of the substrate in the broth and led to significantly enhanced PHB productivity relative to the other modes of feeding. Presence of excessive substrate appeared to inhibit PHB synthesis, but not the production of cells. In fed-batch culture, the maximum specific growth rate (0.265?h^?1) greatly exceeded the value (0.075?h^?1) previously observed in batch culture of the same strain. Similarly, the maximum PHB production rate (up to 1.15?g?·?l^?1?·?h^?1) was nearly 8-fold greater than values observed in batch operations. Fed-batch operation was clearly superior to batch fermentation for producing PHB. A low growth rate was not a prerequisite for PHB accumulation, but a reduced or delayed accumulation of substrate appeared to enhance PHB accumulation. Under the best conditions, PHB constituted up to 63% of dry cell mass after 12?h of culture. The average biomass yield coefficient on sucrose was about 0.35, or a little less than in batch fermentations. The highest PHB concentrations attained were about 18?g?·?l^?1.     

Determination of the kinetic parameters during continuous cultivation of the lipase-producing thermophile Bacillus sp. IHI-91 on olive oil

A thermostable lipase was produced in continuous cultivation of a newly isolated thermophilic Bacillus sp. strain IHI-91 growing optimally at 65 °C. Lipase activity decreased with increasing dilution rate while lipase productivity showed a maximum of 340 U l⁻¹ h⁻¹ at a dilution rate of 0.4 h⁻¹. Lipase productivity was increased by 50% compared to data from batch fermentations. Up to 70% of the total lipase activity measured was associated to cells and by-products or residual substrate. Kinetic and stoichiometric parameters for the utilisation of olive oil were determined. The maximal biomass output method led to a saturation constant K _S of 0.88 g/l. Both batch growth data and a washout experiment yielded a maximal specific growth rate, μ_max, of 1.0 h⁻¹. Oxygen uptake rates of up to 2.9 g l⁻¹h⁻¹ were calculated and the yield coefficient, Y _X/O, was determined to be 0.29 g dry cell weight/g O₂. From an overall material balance the yield coefficient, Y _X/S, was estimated to be 0.60 g dry cell weight/g olive oil. Received: 8 January 1997 / Received revision: 30 April 1997 / Accepted: 4 May 1997     

Kinetics of Bifidobacterium longum ATCC 15707 fermentations: effect of the dilution rate and carbon source

The effect of the dilution rate on biomass and product synthesis in fermentations of glucose, fructose and a commercial mixture of fructooligosaccharides (FOS) by Bifidobacterium longum ATCC 15707 was studied. Kinetic parameters (maximum specific growth rate, Monod constant, maintenance, and yield coefficients) in the mathematical model of the fermentation were estimated from experimental data. In the FOS mixture fermentations, approximately 12% of the total reducing sugars (mainly fructose) in the feed were not metabolized by the bacterium. In fermentations of fructose and the FOS mixture, biomass concentration increased as the dilution rate increased and, once maximum values were reached [3.90 (D=0.20 h^–1) and 2.54 g l^–1 (D=0.15 h^–1), respectively], decreased rapidly as the culture was washed out. Formic acid was detected at low dilution rates in glucose and fructose fermentations. The main products in fermentations of the three carbon sources were lactic and acetic acids. Average values of the molar ratio between acetic and lactic acids of 1.18, 1.21 and 0.83 mol mol^–1 were obtained in glucose, fructose and FOS mixture fermentations, respectively. In batch fermentations carried out without pH control this molar ratio was lower than 1.5 only when fructose was used as the carbon source.