Development of a practical and cost-effective medium for bioethanol production from the seaweed hydrolysate in surface-aerated fermentor by repeated-batch operation

To develop a practical and cost-effective medium for bioethanol production from the hydrolysate of seaweed Sargassum sagamianum, we investigated the feasibility and performance of bioethanol production in CSL (cornsteep liquor)-containing medium, where yeast Pichia stipitis was used and the repeated batch was carried out in a surface-aerated fermentor. The optimal medium replacement time during the repeated operation was determined to be 36 h, and the surface aeration rates were 30 and 100 ml/min. Under these conditions, the repeatedbatch operation was successfully carried out for 6 runs (216 h), in which the maximum bioethanol concentrations reached about 11-12 g/l at each batch operation. These results demonstrated that bioethanol production could be carried out repeatedly and steadily for 216 h. In these experiments, the total cumulative bioethanol production was 57.9 g and 58.0 g when the surface aeration rates were 30 ml/min and 100 ml/min, respectively. In addition, the bioethanol yields were 0.43 (about 84% of theoretical value) and 0.44 (about 86% of theoretical value) when the surface aeration rates were 30 ml/min and 100 ml/min, respectively. CSL was successfully used as a medium ingredient for the bioethanol production from the hydrolysate of seaweed Sargassum sagamianum, indicating that this medium may be practical and cost-effective for bioethanol production.     

Bioethanol production from the hydrolysate of rape stem in a surface-aerated fermentor

In this study, we investigated the feasibility of producing bioethanol from the hydrolysate of rape stem. Specifically, the most ideal yeast strain was screened, and the microaeration was performed by surface aeration on a liquid medium surface. Among the yeast strains examined, Pichia stipitis CBS 7126 displayed the best performance in bioethanol production during the surface-aerated fermentor culture. Pichia stipitis CBS 7126 produced maximally 9.56 g/l of bioethanol from the initial total reducing sugars (about 28 g/l). The bioethanol yield was 0.397 (by the DNS method). Furthermore, this controlled surface aeration method holds promise for use in the bioethanol production from the xylose-containing lignocellulosic hydrolysate of biomass.     

Production of bioethanol using lignocellulosic hydrolysate by the white rot fungus <Emphasis Type="Italic">Hohenbuehelia</Emphasis> sp. ZW-16

A novel white rot fungus strain Hohenbuehelia sp. ZW-16 was identified and first used for bioethanol production in this study. It was found that the strain could produce bioethanol with glucose, xylose and arabinose under limited oxygen condition. Then, corn straw hydrolysate and corncob hydrolysate (mainly composed of glucose, xylose, and arabinose) were used for bioethanol production; the former substrate could produce more bioethanol in the experiment. The optimal sugar concentration and nitrogen sources were selected (50 g/L corn straw hydrolysate and 10 g/L soybean meals, respectively) and the maximum yield of bioethanol reached 4.6 g/L after 8 days of fermentation.     

Optimization of a synthetic mixture composed of major Trichoderma reesei enzymes for the hydrolysis of steam-exploded wheat straw

Background

The commercialization of second-generation bioethanol has not been realized due to several factors, including poor biomass utilization and high production cost. It is generally accepted that the most important parameters in reducing the production cost are the ethanol yield and the ethanol concentration in the fermentation broth. Agricultural residues contain large amounts of hemicellulose, and the utilization of xylose is thus a plausible way to improve the concentration and yield of ethanol during fermentation. Most naturally occurring ethanol-fermenting microorganisms do not utilize xylose, but a genetically modified yeast strain, TMB3400, has the ability to co-ferment glucose and xylose. However, the xylose uptake rate is only enhanced when the glucose concentration is low.

Results

Separate hydrolysis and co-fermentation of steam-pretreated wheat straw (SPWS) combined with wheat-starch hydrolysate feed was performed in two separate processes. The average yield of ethanol and the xylose consumption reached 86% and 69%, respectively, when the hydrolysate of the enzymatically hydrolyzed (18.5% WIS) unwashed SPWS solid fraction and wheat-starch hydrolysate were fed to the fermentor after 1 h of fermentation of the SPWS liquid fraction. In the other configuration, fermentation of the SPWS hydrolysate (7.0% WIS), resulted in an average ethanol yield of 93% from fermentation based on glucose and xylose and complete xylose consumption when wheat-starch hydrolysate was included in the feed. Increased initial cell density in the fermentation (from 5 to 20 g/L) did not increase the ethanol yield, but improved and accelerated xylose consumption in both cases.

Conclusions

Higher ethanol yield has been achieved in co-fermentation of xylose and glucose in SPWS hydrolysate when wheat-starch hydrolysate was used as feed, then in co-fermentation of the liquid fraction of SPWS fed with the mixed hydrolysates. Integration of first-generation and second-generation processes also increases the ethanol concentration, resulting in a reduction in the cost of the distillation step, thus improving the process economics.     

Repeated-batch fermentations of xylose and glucose-xylose mixtures using a respiration-deficient Saccharomyces cerevisiae engineered for xylose metabolism

Xylose-fermenting Saccharomyces strains are needed for commercialization of ethanol production from lignocellulosic biomass. Engineered Saccharomyces cerevisiae strains expressing XYL1, XYL2 and XYL3 from Pichia stipitis, however, utilize xylose in an oxidative manner, which results in significantly lower ethanol yields from xylose as compared to glucose. As such, we hypothesized that reconfiguration of xylose metabolism from oxidative into fermentative manner might lead to efficient ethanol production from xylose. To this end, we generated a respiration-deficient (RD) mutant in order to enforce engineered S. cerevisiae to utilize xylose only through fermentative metabolic routes. Three different repeated-batch fermentations were performed to characterize characteristics of the respiration-deficient mutant. When fermenting glucose as a sole carbon source, the RD mutant exhibited near theoretical ethanol yields (0.46 g g(-1)) during repeated-batch fermentations by recycling the cells. As the repeated-batch fermentation progressed, the volumetric ethanol productivity increased (from 7.5 to 8.3 g L(-1)h(-1)) because of the increased biomass from previous cultures. On the contrary, the mutant showed decreasing volumetric ethanol productivities during the repeated-batch fermentations using xylose as sole carbon source (from 0.4 to 0.3 g L(-1)h(-1)). The mutant did not grow on xylose and lost fermenting ability gradually, indicating that the RD mutant cannot maintain a good fermenting ability on xylose as a sole carbon source. However, the RD mutant was capable of fermenting a mixture of glucose and xylose with stable yields (0.35 g g(-1)) and productivities (0.52 g L(-1)h(-1)) during the repeated-batch fermentation. In addition, ethanol yields from xylose during the mixed sugar fermentation (0.30 g g(-1)) were higher than ethanol yields from xylose as a sole carbon source (0.21 g g(-1)). These results suggest that a strategy for increasing ethanol yield through respiration-deficiency can be applied for the fermentation of lignocellulosic hydrolyzates containing glucose and xylose.     

Critical factors affecting ethanol production by immobilized Pichia stipitis using corn cob hemicellulosic hydrolysate

Fermentation of xylose from hydrolysate of acid-treated corn cob by Pichia stipitis is inhibited by acetic acid and lignin derivatives. In the present study, we have designed and implemented an immobilized cell culture for xylose to ethanol conversion from acid-treated corn cob hydrolysate without the removal of fermentation inhibitors. In this study, cultivations of suspended and immobilized Pichia were compared in terms of ethanol yield and productivity to investigate whether the cell immobilization could improve resistance to inhibitors. Cell immobilization clearly favored the fermentative metabolism in nondetoxified corn cob hydrolysate leading to an improvement of twofold ethanol productivity as compared to that achieved with suspension culture. Calcium alginate as an immobilization matrix was selected to immobilize Pichia cells. Concentrations of sodium alginate, calcium chloride, and fermentor agitation speed were optimized for ethanol production using statistical method. Statistical analysis showed that agitation speed had maximum influence on ethanol production by immobilized Pichia cells. In comparison to suspension culture, immobilization had a positive impact on the fermentative metabolism of Pichia, improving the ethanol yield from 0.40 to 0.43?g/g and productivity from 0.31 to 0.51?g/L/h for acid-treated corn cob hydrolysate.     

Ethanol fermentation from lignocellulosic hydrolysate by a recombinant xylose- and cellooligosaccharide-assimilating yeast strain

The sulfuric acid hydrolysate of lignocellulosic biomass, such as wood chips, from the forest industry is an important material for fuel bioethanol production. In this study, we constructed a recombinant yeast strain that can ferment xylose and cellooligosaccharides by integrating genes for the intercellular expressions of xylose reductase and xylitol dehydrogenase from Pichia stipitis, and xylulokinase from Saccharomyces cerevisiae and a gene for displaying β-glucosidase from Aspergillus acleatus on the cell surface. In the fermentation of the sulfuric acid hydrolysate of wood chips, xylose and cellooligosaccharides were completely fermented after 36 h by the recombinant strain, and then about 30 g/l ethanol was produced from 73 g/l total sugar added at the beginning. In this case, the ethanol yield of this recombinant yeast was much higher than that of the control yeast. These results demonstrate that the fermentation of the lignocellulose hydrolysate is performed efficiently by the recombinant Saccharomyces strain with abilities for xylose assimilation and cellooligosaccharide degradation.     

假丝酵母发酵玉米芯半纤维素水解液生产木糖醇

采用一株驯化过的假丝酵母(Candida sp.)直接发酵经过简单脱毒处理的玉米芯半纤维素水解液生产木糖醇。确定了水解液的最适浓缩倍数在3.0～3.72的范围内。利用正交实验,确定了摇瓶分批发酵工艺条件的最适组合为：摇床转速180r/min,起始C/N为50,起始pH 5.5,接种量5% (体积比)。在此基础上,重点研究了在发酵罐中通气量对酵母发酵玉米芯水解液生产木糖醇的影响。结果表明采用先高后低的分段通气发酵在木糖醇得率方面明显优于恒定通气发酵;其中,在0～24h,3.75 L/min;24～108h,1.25 L/min的分段通气条件下(装液量为2.5L),木糖醇得率(木糖醇/木糖,g/g) 达到0.75 g/g。该结果将有助于建立一种高效的、大规模的利用玉米芯半纤维素水解液发酵生产木糖醇的工艺。     

Production of extracellular lipase by Candida cylindracea CBS 6330

In this study we investigated the influences of aeration, substrate type and concentration on extracellular lipase production in a batch fermentor. The use of air enriched with pure oxygen is the most suitable for the lipase production. Additionally, we found that the presence of fats in the culture broth did not affect the value of the volumetric mass transfer coefficient of oxygen in our system. Olive oil or oleic acid was used as carbon sources. In both cases, the maximal specific rate of growth, μ_max, was the same but the highest activity was obtained when 10?g/dm³ of olive oil were used as an initial substrate concentration.     

Ethanol production from wood hydrolysate using genetically engineered Zymomonas mobilis

An ethanologenic microorganism capable of fermenting all of the sugars released from lignocellulosic biomass through a saccharification process is essential for secondary bioethanol production. We therefore genetically engineered the ethanologenic bacterium Zymomonas mobilis such that it efficiently produced bioethanol from the hydrolysate of wood biomass containing glucose, mannose, and xylose as major sugar components. This was accomplished by introducing genes encoding mannose and xylose catabolic enzymes from Escherichia coli. Integration of E. coli manA into Z. mobilis chromosomal DNA conferred the ability to co-ferment mannose and glucose, producing 91 % of the theoretical yield of ethanol within 36 h. Then, by introducing a recombinant plasmid harboring the genes encoding E. coli xylA, xylB, tal, and tktA, we broadened the range of fermentable sugar substrates for Z. mobilis to include mannose and xylose as well as glucose. The resultant strain was able to ferment a mixture of 20 g/l glucose, 20 g/l mannose, and 20 g/l xylose as major sugar components of wood hydrolysate within 72 h, producing 89.8 % of the theoretical yield. The recombinant Z. mobilis also efficiently fermented actual acid hydrolysate prepared from cellulosic feedstock containing glucose, mannose, and xylose. Moreover, a reactor packed with the strain continuously produced ethanol from acid hydrolysate of wood biomass from coniferous trees for 10 days without accumulation of residual sugars. Ethanol productivity was at 10.27 g/l h at a dilution rate of 0.25 h(-1).     

Staphylococcal Enterotoxin B and Nuclease Production Under Controlled Dissolved Oxygen Conditions

Enterotoxin B, nuclease, and total exoprotein production by Staphylococcus aureus strain S-6 was studied in a 0.5-liter fermentor system. While these extracellular products were elaborated over a wide range of aeration rates, maximal production occurred within the very narrow range of 125 to 150 cm(3) of air per min. The levels attained at the optimal aeration rate were not increased by maintaining a constant pH, although yield of enterotoxin:cell mass was highest at a constant pH of 7.0. During the growth cycle of the cultures, when aeration rate alone or aeration rate and pH were held constant, the dissolved oxygen (DO) levels, initially set at 100% of saturation, decreased to 5 to 10% 4 to 5 h after inoculation. The oxygen demand of the culture then maintained this level for an additional 4 to 6 h. This interval of low DO was characterized by maximal growth and exoprotein production. When the DO was controlled at a constant value throughout growth (by increasing or decreasing the airflow rate as appropriate), the culture demonstrated different optima for maximal growth and exoprotein production. A constant DO of 100% stimulated growth to extremely high densities, but the accumulation of toxin and nuclease was not observed. On the other hand, maintaining constant DO levels at 50 or 10% raised exoprotein levels higher than those achieved in a culture grown at the optimal aeration rate. Compared to the optimal aeration rate culture, the 10% DO culture yielded 20% more nuclease, 25% more toxin, and 40 to 50% more total exoprotein. These results indicate that it is the DO and not the aeration rate, per se, that is influential in controlling growth, toxin, nuclease, and total exoprotein production.     

Detoxification of acidic catalyzed hydrolysate of Kappaphycus alvarezii (cottonii)

Red seaweed, Kappaphycus alvarezii, holds great promise for use in biofuel production due to its high carbohydrate content. In this study, we investigated the effect of fermentation inhibitors to the K. alvarezii hydrolysate on cell growth and ethanol fermentation. In addition, detoxification of fermentation inhibitors was performed to decrease the fermentation inhibitory effect. 5-Hydroxymethylfurfural and levulinic acid, which are liberated from acidic hydrolysis, was also observed in the hydrolysate of K. alvarezii. These compounds inhibited ethanol fermentation. In order to remove these inhibitors, activated charcoal and calcium hydroxide were introduced. The efficiency of activated charcoals was examined and over-liming was used to remove the inhibitors. Activated charcoal was found to be more effective than calcium hydroxide to remove the inhibitors. Detoxification by activated charcoal strongly improved the fermentability of dilute acid hydrolysate in the production of bioethanol from K. alvarezii with Saccharomyces cerevisiae. The optimal detoxifying conditions were found to be below an activated charcoal concentration of 5%.     

Xylitol production from high xylose concentration: evaluation of the fermentation in bioreactor under different stirring rates

AIMS: To investigate the production of xylitol by the yeast Candida guilliermondii FTI 20037, in a bioreactor, from rice straw hemicellulosic hydrolysate with a high xylose concentration. METHODS AND RESULTS: Batch fermentation was carried out with rice straw hemicellulosic hydrolysate containing about 85 g xylose l(-1), in a stirred-tank bioreactor at 30 degrees C, under aeration of 1.3 vvm (volume of air per volume of medium per min) and different stirring rates (200, 300 and 500 rev min(-1)). The bioconversion of xylose into xylitol by the yeast depended on the stirring rate, the maximum xylitol yield (YP/S = 0.84 g g(-1)) being achieved at 300 rev min-1, with no need to pretreat the hydrolysate for purification. CONCLUSIONS: To determine the most adequate oxygen transfer rate is fundamental to improving the xylose-to-xylitol bioconversion by C. guilliermondii. SIGNIFICANCE AND IMPACT OF THE STUDY: For the microbial production of xylitol to be economically viable, the initial concentration of xylose in the lignocellulosic hydrolysate should be as high as possible, as with high substrate concentrations it is possible to increase the final product concentration. Nevertheless, there are few reports on the use of high xylose concentrations. Considering a process in bioreactor, from rice straw hemicellulosic hydrolysate, this is an innovator work.     

Opuntia ficus-indica cladodes as feedstock for ethanol production by Kluyveromyces marxianus and Saccharomyces cerevisiae

The feasibility of ethanol production using an enzymatic hydrolysate of pretreated cladodes of Opuntia ficus-indica (prickly pear cactus) as carbohydrate feedstock was investigated, including a comprehensive chemical analysis of the cladode biomass and the effects of limited aeration on the fermentation profiles and sugar utilization. The low xylose and negligible mannose content of the cladode biomass used in this study suggested that the hemicellulose structure of the O. ficus-indica cladode was atypical of hardwood or softwood hemicelluloses. Separate hydrolysis and fermentation and simultaneous saccharification and fermentation procedures using Kluyveromyces marxianus and Saccharomyces cerevisiae at 40 and 35 °C, respectively, gave similar ethanol yields under non-aerated conditions. In oxygen-limited cultures K. marxianus exhibited almost double the ethanol productivity compared to non-aerated cultures, although after sugar depletion utilization of the produced ethanol was evident. Ethanol concentrations of up to 19.5 and 20.6 g l^?1 were obtained with K. marxianus and S. cerevisiae, respectively, representing 66 and 70 % of the theoretical yield on total sugars in the hydrolysate. Because of the low xylan content of the cladode biomass, a yeast capable of xylose fermentation might not be a prerequisite for ethanol production. K. marxianus, therefore, has potential as an alternative to S. cerevisiae for bioethanol production. However, the relatively low concentration of fermentable sugars in the O. ficus-indica cladode hydrolysate presents a technical constraint for commercial exploitation.     

Influence of the propagation strategy for obtaining robust Saccharomyces cerevisiae cells that efficiently co-ferment xylose and glucose in lignocellulosic hydrolysates

Development of xylose-fermenting yeast strains that are tolerant to the inhibitors present in lignocellulosic hydrolysates is crucial to achieve efficient bioethanol production processes. In this study, the importance of the propagation strategy for obtaining robust cells was studied. Addition of hydrolysate during propagation of the cells adapted them to the inhibitors, resulting in more tolerant cells with shorter lag phases and higher specific growth rates in minimal medium containing acetic acid and vanillin than unadapted cells. Addition of hydrolysate during propagation also resulted in cells with better fermentation capabilities. Cells propagated without hydrolysate were unable to consume xylose in wheat straw hydrolysate fermentations, whereas 40.3% and 97.7% of the xylose was consumed when 12% and 23% (v/v) hydrolysate, respectively, was added during propagation. Quantitative polymerase chain reaction revealed changes in gene expression, depending on the concentration of hydrolysate added during propagation. This study highlights the importance of using an appropriate propagation strategy for the optimum performance of yeast in fermentation of lignocellulosic hydrolysates.     

Candida shehatae and Saccharomyces cerevisiae work synergistically to improve ethanol fermentation from sugarcane bagasse and rice straw hydrolysate in immobilized cell bioreactor

Sugarcane bagasse (SCB) and rice straw (RS), abundant lignocellulosic agro‐industrial residues in South‐East Asia, are potent feedstocks for bioethanol production as they contain significant amount of glucose and xylose monomers after fractionation and subsequent enzymatic hydrolysis. To simultaneously convert glucose and xylose to ethanol, it requires co‐cultivation of Saccharomyces cerevisiae and Candida shehatae which are hexose and pentose‐fermenting yeasts, respectively. Xylose‐fermenting strain grows slower than glucose‐fermenting one, therefore low efficiency of xylose‐to‐ethanol conversion was found. To enhance the efficiency of ethanol fermentation, the present work proposed to improve xylose assimilation by using co‐immobilization of two strains in a packed bed bioreactor and to increase oxygenation of the medium by applying a recycled batch system when the recycle stream was intervened by a mixing system in a naturally aerated vessel. Initially, conversion of glucose and xylose to ethanol using pure culture was investigated. Subsequently, influence of different immobilization techniques was investigated. Cells entrapment in Ca‐alginate beads provided considerably high ethanol yield over cells immobilized on delignified cellulose, and thus it was selected to use as inoculum in an immobilized cell bioreactor (ICB). The results showed that continuous ethanol production yielded 0.38 and 0.40 g/g corresponding to 74.5% and 78.4% theoretical yields from SCB and RS hydrolysate, respectively. However, recycled batch system produced significantly improved ethanol yield to 0.49 g/g and 0.50 g/g corresponding to 96.1% and 98.0% theoretical yields for SCB and RS hydrolysate, respectively. In this study, higher ethanol concentration and less unfermented sugar concentration was successfully achieved in the ICB with recycled batch system when using SCB and RS hydrolysate as the substrate.     

Increase of xylitol production rate by controlling redox potential in Candida parapsilosis

The effect of redox potential on xylitol production by Candida parapsilosis was investigated. The redox potential was found to be useful for monitoring the dissolved oxygen (DO) level in culture media, especially when the DO level was low. An increase in the agitation speed in a 5 L fermentor resulted in an increased culture redox potential as well as enhanced cell growth. Production of xylitol was maximized at a redox potential of 100 mV. As the initial cell concentration increased from 8 g/L to 30 g/L, the volumetric productivity of xylitol increased from 1.38 g/L. h to 4.62 g/L. h. A two-stage xylitol production strategy was devised, with stage 1 involving rapid production of cells under well-aerated conditions, and stage 2 involving cultivation with reduced aeration such that the culture redox potential was 100 mV. Using this technique, a final xylitol concentration of 180 g/L was obtained from a culture medium totally containing 254.5 g/L xylose in a 3,000 L pilot scale fermentor after 77 h fermentation. The volumetric productivity of xylitol during the fermentation was 2.34 g/L. h.     

Fermentation performance of engineered and evolved xylose-fermenting Saccharomyces cerevisiae strains

Lignocellulose hydrolysate is an abundant substrate for bioethanol production. The ideal microorganism for such a fermentation process should combine rapid and efficient conversion of the available carbon sources to ethanol with high tolerance to ethanol and to inhibitory components in the hydrolysate. A particular biological problem are the pentoses, which are not naturally metabolized by the main industrial ethanol producer Saccharomyces cerevisiae. Several recombinant, mutated, and evolved xylose fermenting S. cerevisiae strains have been developed recently. We compare here the fermentation performance and robustness of eight recombinant strains and two evolved populations on glucose/xylose mixtures in defined and lignocellulose hydrolysate-containing medium. Generally, the polyploid industrial strains depleted xylose faster and were more resistant to the hydrolysate than the laboratory strains. The industrial strains accumulated, however, up to 30% more xylitol and therefore produced less ethanol than the haploid strains. The three most attractive strains were the mutated and selected, extremely rapid xylose consumer TMB3400, the evolved C5 strain with the highest achieved ethanol titer, and the engineered industrial F12 strain with by far the highest robustness to the lignocellulosic hydrolysate.     

Synthesis of staphylococcal enterotoxin A and nuclease under controlled fermentor conditions.

The production of enterotoxin A and nuclease by Staphylococcus aureus strain 100 was studied in a 1.0-liter fermentor. The effects of the gas flow rate, pH, and dissolved oxygen were evaluated. Toxin and nuclease secretion occurred under all conditions which permitted growth of the organism. Final yields of toxin and nuclease in cultures grown at constant air flow rates, ranging from 50 to 500 cm3 per min, were higher at successively higher flow rates. An optimum flow rate for either toxin or nuclease production was not observed. When the aeration rate alone or aeration rate and pH were held constant, the dissolved oxygen levels in the culture decreased from the initial 100% level to 0 to 5% 3 to 4 h after inoculation. The O2 demand of the culture then maintained this level for an additional 4 to 5 h. This low dissolved oxygen interval was characterized by rapid growth and extracellular protein production. Controlling the dissolved oxygen at a constant level throughout growth did not increase the final levels of toxin and nuclease above those achieved at the respective constant pH values. Growth under the influence of a constant aeration rate of 500 cm3 per min and a constant pH of 6.5 and 7.0 yielded the highest titers of nuclease (1,550 units/ml) and toxin (10.5 mug/ml) obtained in any of the fermentations conducted in this study. Sparging fermentor cultures with pure oxygen at a rate of 100 cm3 per min yielded growth and extracellular protein levels similar to those achieved at the sparge rate of 500 cm3 of air per min. Controlling the dissolved oxygen at 100% of pure oxygen saturation appeared to inhibit the culture, as the final cultural turbidity as well as the levels of toxin and nuclease were reduced. These data indicate that enterotoxin and nuclease secretions are closely associated with the growth of strain 100. Analyses of the production rates of these components indicated that early log phase was the most efficient production interval in the growth cycle and that this efficiency was increased by pH control at 6.7 to 6.8 and dissolved oxygen control at 10% of air saturation.     

Synthesis of staphylococcal enterotoxin A and nuclease under controlled fermentor conditions.

The production of enterotoxin A and nuclease by Staphylococcus aureus strain 100 was studied in a 1.0-liter fermentor. The effects of the gas flow rate, pH, and dissolved oxygen were evaluated. Toxin and nuclease secretion occurred under all conditions which permitted growth of the organism. Final yields of toxin and nuclease in cultures grown at constant air flow rates, ranging from 50 to 500 cm3 per min, were higher at successively higher flow rates. An optimum flow rate for either toxin or nuclease production was not observed. When the aeration rate alone or aeration rate and pH were held constant, the dissolved oxygen levels in the culture decreased from the initial 100% level to 0 to 5% 3 to 4 h after inoculation. The O2 demand of the culture then maintained this level for an additional 4 to 5 h. This low dissolved oxygen interval was characterized by rapid growth and extracellular protein production. Controlling the dissolved oxygen at a constant level throughout growth did not increase the final levels of toxin and nuclease above those achieved at the respective constant pH values. Growth under the influence of a constant aeration rate of 500 cm3 per min and a constant pH of 6.5 and 7.0 yielded the highest titers of nuclease (1,550 units/ml) and toxin (10.5 mug/ml) obtained in any of the fermentations conducted in this study. Sparging fermentor cultures with pure oxygen at a rate of 100 cm3 per min yielded growth and extracellular protein levels similar to those achieved at the sparge rate of 500 cm3 of air per min. Controlling the dissolved oxygen at 100% of pure oxygen saturation appeared to inhibit the culture, as the final cultural turbidity as well as the levels of toxin and nuclease were reduced. These data indicate that enterotoxin and nuclease secretions are closely associated with the growth of strain 100. Analyses of the production rates of these components indicated that early log phase was the most efficient production interval in the growth cycle and that this efficiency was increased by pH control at 6.7 to 6.8 and dissolved oxygen control at 10% of air saturation.