Development of a Biomimetic Quadruped Robot

This paper presents the design and prototype of a small quadruped robot whose walking motion is realized by two piezocomposite actuators. In the design, biomimetic ideas are employed to obtain the agility of motions and sustainability of a heavy load. The design of the robot legs is inspired by the leg configuration of insects, two joints （hip and knee） of the leg enable two basic motions, lifting and stepping. The robot frame is designed to have a slope relative to the horizontal plane, which makes the robot move forward. In addition, the bounding locomotion of quadruped animals is implemented in the robot. Experiments show that the robot can carry an additional load of about 100 g and run with a fairly high velocity. The quadruped prototype can be an important step towards the goal of building an autonomous mobile robot actuated by piezocomposite actuators.     

Control of a Quadruped Robot with Bionic Springy Legs in Trotting Gait

Legged robots have better performance on discontinuous terrain than that of wheeled robots. However, the dynamic trotting and balance control of a quadruped robot is still a challenging problem, especially when the robot has multi-joint legs. This paper presents a three-dimensional model of a quadruped robot which has 6 Degrees of Freedom （DOF） on torso and 5 DOF on each leg. On the basis of the Spring-Loaded Inverted Pendulum （SLIP） model, body control algorithm is discussed in the first place to figure out how legs work in 3D trotting. Then, motivated by the principle of joint function separation and introducing certain biological characteristics, two joint coordination approaches are developed to produce the trot and provide balance. The robot reaches the highest speed of 2.0 m.s-1, and keeps balance under 250 Kg.m.s-1 lateral disturbance in the simulations. The effectiveness of these approaches is also verified on a prototype robot which runs to 0.83 m.s-1 on the treadmill, The simulations and experiments show that legged robots have good biological properties, such as the ground reaction force, and spring-like leg behavior.     

Biomimetic Design and Optimal Swing of a Hexapod Robot Leg

Biological inspiration has spawned a wealth of solutions to both mechanical design and control schemes in the efforts to develop agile legged machines. This paper presents a compliant leg mechanism for a small six-legged robot, HITCR-ll, based on abstracted anatomy from insect legs. Kinematic structure, relative proportion of leg segment lengths and actuation system were analyzed in consideration of anatomical structure as well as muscle system of insect legs and desired mobility. A spring based passive compliance mechanism inspired by musculoskeletal structures of biological systems was integrated into distal segment of the leg to soften foot impact on touchdown. In addition, an efficient locomotion planner capable of generating natural movements for the legs during swing phase was proposed. The problem of leg swing was formulated as an optimal control procedure that satisfies a series of locomotion task terms while minimizing a biologically-based objective function, which was solved by a Gauss Pseudospectral Method （GPM） based numerical technique. We applied this swing generation algorithm to both a simulation platform and a robot prototype. Results show that the proposed leg structure and swing planner are able to successfully perform effective swing movements on rugged terrains.     

A Biological Micro Actuator: Graded and Closed-Loop Control of Insect Leg Motion by Electrical Stimulation of Muscles

In this study, a biological microactuator was demonstrated by closed-loop motion control of the front leg of an insect (Mecynorrhina torquata, beetle) via electrical stimulation of the leg muscles. The three antagonistic pairs of muscle groups in the front leg enabled the actuator to have three degrees of freedom: protraction/retraction, levation/depression, and extension/flexion. We observed that the threshold amplitude (voltage) required to elicit leg motions was approximately 1.0 V; thus, we fixed the stimulation amplitude at 1.5 V to ensure a muscle response. The leg motions were finely graded by alternation of the stimulation frequencies: higher stimulation frequencies elicited larger leg angular displacement. A closed-loop control system was then developed, where the stimulation frequency was the manipulated variable for leg-muscle stimulation (output from the final control element to the leg muscle) and the angular displacement of the leg motion was the system response. This closed-loop control system, with an optimized proportional gain and update time, regulated the leg to set at predetermined angular positions. The average electrical stimulation power consumption per muscle group was 148 µW. These findings related to and demonstrations of the leg motion control offer promise for the future development of a reliable, low-power, biological legged machine (i.e., an insect–machine hybrid legged robot).     

Running over unknown rough terrain with a one-legged planar robot

The ability to traverse unknown, rough terrain is an advantage that legged locomoters have over their wheeled counterparts. However, due to the complexity of multi-legged systems, research in legged robotics has not yet been able to reproduce the agility found in the animal kingdom. In an effort to reduce the complexity of the problem, researchers have developed single-legged models to gain insight into the fundamental dynamics of legged running. Inspired by studies of animal locomotion, researchers have proposed numerous control strategies to achieve stable, one-legged running over unknown, rough terrain. One such control strategy incorporates energy variations into the system during the stance phase by changing the force-free leg length as a sinusoidal function of time. In this research, a one-legged planar robot capable of implementing this and other state-of-the-art control strategies was designed and built. Both simulated and experimental results were used to determine and compare the stability of the proposed controllers as the robot was subjected to unknown drop and raised step perturbations equal to 25% of the nominal leg length. This study illustrates the relative advantages of utilizing a minimal-sensing, active energy removal control scheme to stabilize running over rough terrain.     

Self-Localization of an Omnidirectional Mobile Robot Based on an Optical Flow Sensor

An omnidirectional mobile robot has the advantage that three degrees of freedom of motion in a 2D plane can be set independently, and it can thus move in arbitrary directions while maintaining the same heading. Dead reckoning is often used for self-localization using onboard sensors in omnidirectional robots, by means of measuring wheel velocities from motor encoder data, as well as in car-like robots. However, omnidirectional mobile robots can easily slip because of the nature of omni-wheels with multiple free rollers, and dead reckoning will not work if even one wheel is not attached to the ground. An odometry method where the data is not affected by wheel slip must be introduced to acquire high quality self-location data for omnidirectional mobile robots. We describe a method to obtain robot ego-motion using camera images and optical flow calculation, i.e., where the camera is used as a velocity sensor. In this paper, a silicon retina vision camera is introduced as a mobile robot sensor, which has a good dynamic range under various lighting conditions. A Field-Programmable Gate Array (FPGA) optical flow circuit for the silicon retina is also developed to measure ego-motion of the mobile robot. The developed optical flow calculation system is introduced into a small omnidirectional mobile robot and evaluation experiments for the mobile robot ego-motion are carried out. In the experiments, the accuracy of self-location by the dead reckoning and optical flow methods are evaluated by comparison using motion capture. The results show that the correct position is obtained by the optical flow sensor rather than by dead reckoning.     

Concept of Intelligent Mechanical Design for Autonomous Mobile Robots

The concept of Intelligent Mechanical Design (IMD) is presented to show how a mechanical structure can be designed to affect robot controllability, simplification and task performance. Exploring this concept produces landmarks in the territory of mechanical robot design in the form of seven design principles. The design principles, which we call the Mecha-Telligence Principles (MTP), provide guidance on how to design mechanics for autonomous mobile robots. These principles guide us to ask the right questions when investigating issues concerning self-controllable, reliable, feasible, and compatible mechanics for autonomous mobile robots. To show how MTP can be applied in the design process we propose a novel methodology, named as Mecha-Telligence Methodology (MTM). Mechanical design by the proposed methodology is based on preference classification of the robot specification described by interaction of the robot with its environment and the physical parameters of the robot mechatronics. After defining new terms, we investigate the feasibility of the proposed methodology to the mechanical design of an autonomous mobile sewer inspection robot. In this industrial project we show how a passive-active intelligent moving mechanism can be designed using the MTM and employed in the field.     

An Efficient Gait-generating Method for Electrical Quadruped Robot Based on Humanoid Power Planning Approach

The research field of legged robots has always relied on the bionic robotic research,especially in locomotion regulating approaches,such as foot trajectory planning,body stability regulating and energy efficiency prompting.Minimizing energy consumption and keeping the stability of body are considered as two main characteristics of human walking.This work devotes to develop an energy-efficient gait control method for electrical quadruped robots with the inspiration of human walking pattern.Based on the mechanical power distribution trend,an efficient humanoid power redistribution approach is established for the electrical quadruped robot.Through studying the walking behavior acted by mankind,such as the foot trajectory and change of mechanical power,we believe that the proposed controller which includes the bionic foot movement trajectory and humanoid power redistribution method can be implemented on the electrical quadruped robot prototype.The stability and energy efficiency of the proposed controller are tested by the simulation and the single-leg prototype experi-ment.The results verify that the humanoid power planning approach can improve the energy efficiency of the electrical quadruped robots.     

Behaviour-based modelling of hexapod locomotion: linking biology and technical application

Walking in insects and most six-legged robots requires simultaneous control of up to 18 joints. Moreover, the number of joints that are mechanically coupled via body and ground varies from one moment to the next, and external conditions such as friction, compliance and slope of the substrate are often unpredictable. Thus, walking behaviour requires adaptive, context-dependent control of many degrees of freedom. As a consequence, modelling legged locomotion addresses many aspects of any motor behaviour in general. Based on results from behavioural experiments on arthropods, we describe a kinematic model of hexapod walking: the distributed artificial neural network controller walknet. Conceptually, the model addresses three basic problems in legged locomotion. (I) First, coordination of several legs requires coupling between the step cycles of adjacent legs, optimising synergistic propulsion, but ensuring stability through flexible adjustment to external disturbances. A set of behaviourally derived leg coordination rules can account for decentralised generation of different gaits, and allows stable walking of the insect model as well as of a number of legged robots. (II) Second, a wide range of different leg movements must be possible, e.g. to search for foothold, grasp for objects or groom the body surface. We present a simple neural network controller that can simulate targeted swing trajectories, obstacle avoidance reflexes and cyclic searching-movements. (III) Third, control of mechanically coupled joints of the legs in stance is achieved by exploiting the physical interactions between body, legs and substrate. A local positive displacement feedback, acting on individual leg joints, transforms passive displacement of a joint into active movement, generating synergistic assistance reflexes in all mechanically coupled joints.     

Abigaille-Ⅲ： A Versatile,Bioinspired Hexapod for Scaling Smooth Vertical Surfaces

This paper presents a novel, legged robot, Abigaille-Ⅲ, which is a hexapod actuated by 24 miniature gear motors. This robot uses dual-layer dry adhesives to climb smooth, vertical surfaces. Because dry adhesives are passive and stick to various surfaces, they have advantages over mechanisms such as suction, claws and magnets. The mechanical design and posture of Abigaille-Ⅲ were optimized to reduce pitchback forces during vertical climbing. The robot＇s electronics were designed around a Field Programmable Gate Array, producing a versatile computing architecture. The robot was reconfigured for vertical climbing with both 5 and 6 legs, and with 3 or 4 motors per leg, without changes to the electronic hardware. Abigaille-Ⅲ demonstrated dexterity through vertical climbing on uneven surfaces, and by transferring between horizontal and vertical sur- faces. In endurance tests, Abigaille-Ⅲ completed nearly 4 hours of continuous climbing and over 7 hours of loitering, showing that dry adhesive climbing systems can be used for extended missions.     

Convergent evolution and locomotion through complex terrain by insects, vertebrates and robots

Arthropods are the most successful members of the animal kingdom largely because of their ability to move efficiently through a range of environments. Their agility has not been lost on engineers seeking to design agile legged robots. However, one cannot simply copy mechanical and neural control systems from insects into robotic designs. Rather one has to select the properties that are critical for specific behaviors that the engineer wants to capture in a particular robot. Convergent evolution provides an important clue to the properties of legged locomotion that are critical for success. Arthropods and vertebrates evolved legged locomotion independently. Nevertheless, many neural control properties and mechanical schemes are remarkably similar. Here we describe three aspects of legged locomotion that are found in both insects and vertebrates and that provide enhancements to legged robots. They are leg specialization, body flexion and the development of a complex head structure. Although these properties are commonly seen in legged animals, most robotic vehicles have similar legs throughout, rigid bodies and rudimentary sensors on what would be considered the head region. We describe these convergent properties in the context of robots that we developed to capture the agility of insects in moving through complex terrain.     

Rapid inversion: running animals and robots swing like a pendulum under ledges

Escaping from predators often demands that animals rapidly negotiate complex environments. The smallest animals attain relatively fast speeds with high frequency leg cycling, wing flapping or body undulations, but absolute speeds are slow compared to larger animals. Instead, small animals benefit from the advantages of enhanced maneuverability in part due to scaling. Here, we report a novel behavior in small, legged runners that may facilitate their escape by disappearance from predators. We video recorded cockroaches and geckos rapidly running up an incline toward a ledge, digitized their motion and created a simple model to generalize the behavior. Both species ran rapidly at 12-15 body lengths-per-second toward the ledge without braking, dove off the ledge, attached their feet by claws like a grappling hook, and used a pendulum-like motion that can exceed one meter-per-second to swing around to an inverted position under the ledge, out of sight. We discovered geckos in Southeast Asia can execute this escape behavior in the field. Quantification of these acrobatic behaviors provides biological inspiration toward the design of small, highly mobile search-and-rescue robots that can assist us during natural and human-made disasters. We report the first steps toward this new capability in a small, hexapedal robot.     

Gait Study and Pattern Generation of a Starfish-Like Soft Robot with Flexible Rays Actuated by SMAs

This paper presents the design and development of a starfish-like soft robot with flexible rays and the implementation of multi-gait locomotion using Shape Memory Alloy （SMA） actuators. The design principle was inspired by the starfish, which possesses a remarkable symmetrical structure and soft internal skeleton. A soft robot body was constructed by using 3D printing technology. A kinematic model of the SMA spring was built and developed for motion control according to displacement and force requirements. The locomotion inspired from starfish was applied to the implementation of the multi-ray robot through the flexible actuation induced multi-gait movements in various environments. By virtue of the proposed ray control patterns in gait transition, the soft robot was able to cross over an obstacle approximately twice of its body height. Results also showed that the speed of the soft robot was 6.5 times faster on sand than on a clammy rough terrain. These experiments demonstrated that the bionic soft robot with flexible rays actuated by SMAs and multi-gait locomotion in proposed patterns can perform successfully and smoothly in various terrains.     

An analytical estimation of the energy cost for legged locomotion

Legged locomotion requires the determination of a number of parameters such as stride period, stride length, order of leg movements, leg trajectory, etc. How are these parameters determined? It has been reported that the locomotor patterns of many legged animals exhibit common characteristics, which suggests that there exists a basic strategy for legged locomotion. In this study we derive an equation to estimate the cost of transport for legged locomotion and examine a criterion of the minimization of the transport cost as a candidate of the strategy. The obtained optimal locomotor pattern that minimizes the cost suitably represents many characteristics of the pattern observed in legged animals. This suggests that the locomotor pattern of legged animals is well optimized with regard to the energetic cost. The result also suggests that the existence of specific gait patterns and the phase transition between them could be the result due to optimization; they are induced by the change in the distribution of ground reaction forces for each leg during locomotion.     

Shape memory alloy-based small crawling robots inspired by C. elegans

Inspired by its simple musculature, actuation and motion mechanisms, we have developed a small crawling robot that closely mimics the model organism of our choice: Caenorhabditis elegans. A thermal shape memory alloy (SMA) was selected as an actuator due to the similarities of its properties to C. elegans muscles. Based on the anatomy of C. elegans, a 12-unit robot was designed to generate a sinusoidal undulating motion. Each body unit consisting of a pair of SMA actuators is serially connected by rigid links with an embedded motion control circuit. A simple binary operation-based motion control mechanism was implemented using a microcontroller. The assembled robot can execute C. elegans-like motion with a 0.17 Hz undulation frequency. Its motion is comparable to that of a real worm.     

Bio-Inspired Controller for a Robot Cheetah with a Neural Mechanism Controlling Leg Muscles

The realization of a high-speed running robot is one of the most challenging problems in developing legged robots.The excellent performance of cheetahs provides inspiration for the control and mechanical design of such robots.This paper presents a three-dimensional model of a cheetah that predicts the locomotory behaviors of a running cheetah.Applying biological knowledge of the neural mechanism,we control the muscle flexion and extension during the stance phase,and control the positions of the joints in the flight phase via a PD controller to minimize complexity.The proposed control strategy is shown to achieve similar locomotion of a real cheetah.The simulation realizes good biological properties,such as the leg retraction,ground reaction force,and spring-like leg behavior.The stable bounding results show the promise of the controller in high-speed locomotion.The model can reach 2.7 m·s- 1 as the highest speed,and can accelerate from 0 to 1.5 m·s -1 in one stride cycle.A mechanical structure based on this simulation is designed to demonstrate the control approach,and the most recently developed hindlimb controlled by the proposed controller is presented in swinging-leg experiments and jump-force experiments.     

Parasitic Robot System for Waypoint Navigation of Turtle

In research on small mobile robots and biomimetic robots,locomotion ability remains a major issue despite many advances in technology.However,evolution has led to there being many real animals capable of excellent locomotion.This paper presents a "parasitic robot system" whereby locomotion abilities of an animal are applied to a robot task.We chose a turtle as our first host animal and designed a parasitic robot that can perform "operant conditioning".The parasitic robot,which is attached to the turtle,can induce object-tracking behavior of the turtle toward a Light Emitting Diode (LED) and positively reinforce the behavior through repeated stimulus-response interaction.After training sessions over five weeks,the robot could successfully control the direction of movement of the trained turtles in the waypoint navigation task.This hybrid animal-robot interaction system could provide an alternative solution to some of the limitations of conventional mobile robot systems in various fields,and could also act as a useful interaction system for the behavioral sciences.     

BigDog-inspired studies in the locomotion of goats and dogs

Collision-based expenditure of mechanical energy and the compliance and geometry of the leg are fundamental, interrelated considerations in the mechanical design of legged runners. This article provides a basic context and rationale for experiments designed to inform each of these key areas in Boston Dynamic's BigDog robot. Although these principles have been investigated throughout the past few decades within different academic disciplines, BigDog required that they be considered together and in concert with an impressive set of control algorithms that are not discussed here. Although collision reduction is an important strategy for reducing mechanical cost of transport in the slowest and fastest quadrupedal gaits, walking and galloping, BigDog employed an intermediate-speed trotting gait without collision reduction. Trotting, instead, uses a spring-loaded inverted pendulum mechanism with potential for storage and return of elastic strain energy in appropriately compliant structures. Rather than tuning BigDog's built-in leg springs according to a spring-mass model-based virtual leg-spring constant , a much stiffer distal leg spring together with actuation of the adjacent joint provided good trotting dynamics and avoided functional limitations that might have been imposed by too much compliance in real-world terrain. Adjusting the directional compliance of the legs by adopting a knee-forward, elbow-back geometry led to more robust trotting dynamics by reducing perturbations about the pitch axis of the robot's center of mass (CoM). BigDog is the most successful large-scale, all-terrain trotting machine built to date and it continues to stimulate our understanding of legged locomotion in comparative biomechanics as well as in robotics.     

Development of an Amphibious Turtle-Inspired Spherical Mother Robot

Robots play an important role in underwater monitoring and recovery operations, such as pollution detection, submarine sampling and data collection, video mapping, and object recovery in dangerous places. However, regular-sized robots may not be suitable for applications in some restricted underwater environments. Accordingly, in previous research we designed several novel types of bio-inspired microrobots using Ionic Polymer Metal Composite （IPMC） and Shape Memory Alloy （SMA） ac- tuators. These microrobots possess some attributes of compact structure, multi-functionality, flexibility, and precise positioning. However, they lack the attributes of long endurance, stable high speed, and large load capacity necessary for real-world appli- cations. To overcome these disadvantages, we proposed a mother-son robot system, composed of several microrobots as sons and a newly designed amphibious spherical robot as the mother. Inspired by amphibious turtles, the mother robot was designed with a spherical body and four legs with two Degrees of Freedom （DOF）. It is actuated by four vectored water-jet propellers and ten servomotors, and it is capable of walking on land and cruising underwater. We analysed the mother robot＇s walking and underwater cruising mechanisms, constructed a prototype, and carried out a series of experiments to evaluate its amphibious motions. Good motion performance was observed in the experiments.