Cellulose hydrolysis by immobilized <Emphasis Type="Italic">Trichoderma reesei</Emphasis> cellulase

Cellulose hydrolysis by immobilized Trichoderma reesei cellulase in the presence of a low viscosity ionic liquid, 1-ethyl-3-methylimidazolium diethyl phosphate (EMIM-DEP), was investigated. Preparation of the carrier-free immobilized cellulase was optimized with respect to concentration of the cross-linker and the type of precipitant. The addition of 2% (v/v) EMIM-DEP during hydrolysis gave an initial reaction rate 2.7 times higher than the hydrolysis rate with no ionic liquid. The initial yield after 2 h was 0.7 g glucose/g cellulose, and the carrier-free immobilized cellulase (CFIC) was effectively re-used five times.     

Strain improvement of <Emphasis Type="Italic">Trichoderma reesei</Emphasis> Rut C-30 for increased cellulase production

The strain of Trichoderma reesei Rut C-30 was subjected to mutation after treatment with N-methyl-N′-nitro-N-nitrosoguanidine (NG) for 6 h followed by UV irradiation for 15 min. Successive mutants showed enhanced cellulase production, clear hydrolysis zone and rapid growth on Avicel-containing plate. Particularly, the mutant NU-6 showed approximately two-fold increases in activity of both FPA and CMCase in shake flask culture when grown on basal medium containing peptone (1%) and wheat bran (1%). The enzyme production was further optimized using eight different media. When a mixture of lactose and yeast cream was used as cellulase inducer, the mutant NU-6 yielded the highest enzyme and cell production with a FPase activity of 6.2 U ml⁻¹, a CMCase activity of 54.2 U ml⁻¹, a β-glucosidase activity of 0.39 U ml⁻¹, and a fungal biomass of 12.6 mg ml⁻¹. It deserved noting that the mutant NU-6 also secreted large amounts of xylanases (291.3 U ml⁻¹). These results suggested that NU-6 should be an attractive producer for both cellulose and xylanase production.     

Functional display of fungal cellulases from <Emphasis Type="Italic">Trichoderma </Emphasis><Emphasis Type="Italic">reesei</Emphasis> on phage M13

To test whether the phage display technology could be applied in cellulase engineering, phagemids harboring the genes encoding the mature forms of cellobiohydrolase I (CBH I) and endoglucanase I (EG I) from filamentous fungus Trichoderma reesei were constructed, respectively. CBH I and EG I fused to the phage coat protein encoded by the g3 gene were expressed and displayed on phage M13. The phage-bound cellulases retained their activities as determined by hydrolysis of the corresponding substrates, Also, their binding abilities to insoluble cellulose substrate were confirmed by an ELISA method. Overall, these results demonstrate that cellulases can be displayed on phage surface while maintaining their biological function, thus providing an alternative for directed evolution and high-throughput screening for improved cellulases.     

Functional analysis of the <Emphasis Type="Italic">egl3</Emphasis> upstream region in filamentous fungus <Emphasis Type="Italic">Trichoderma reesei</Emphasis>

In the filamentous fungus Trichoderma reesei, endoglucanase III (EGIII) is coordinately expressed with other cellulases during growth on cellulose, its derivatives, and L-sorbose. To elucidate EGIII induction mechanism, we cloned and sequenced the upstream region of egl3 encoding EGIII. Two GGCTAA motifs, a putative binding site for ACEII and xylanase regulator Xyr1, were found on the template strand of the egl3 upstream region. Deletion analysis of the egl3 upstream region using the beta-glucuronidase (GUS) reporter system revealed that removal of regions containing the GGCTAA motifs and the region between −1,045 and −1,002 bp containing GGCTAT motif severely affected GUS inducibility. Furthermore, mutation of the two GGCTAA motifs and the GGCTAT motif of this region led to a significant decrease in GUS activity. These data indicate that both GGCTAA and GGCTAT are key motifs for egl3 expression, and that egl3 induction may also be controlled by Xyr1. This hypothesis was supported by in vitro electrophoretic mobility shift assay, in which heterologously expressed Xyr1 specifically bound not only GGCTAA but also GGCTAT motif.     

Nucleosome transactions on the<Emphasis Type="Italic"> Hypocrea jecorina</Emphasis> (<Emphasis Type="Italic"> Trichoderma reesei</Emphasis>) cellulase promoter<Emphasis Type="Italic"> cbh2</Emphasis> associated with cellulase induction

The 5 regulatory region of the cbh2 gene of Hypocrea jecorina contains the cbh2 activating element (CAE) which is essential for induction of cbh2 gene expression by sophorose and cellulose. The CAE consists of two motifs, a CCAAT box on the template strand and a GTAATA box on the coding strand, which cooperate during induction. Northern analyses of cbh2 gene expression has revealed an absolute dependence on induction, but no direct effect of Cre1-mediated carbon catabolite repression. Investigation of the chromatin structure in the wild-type strain showed that, under repressing conditions, there is a nucleosome free region (nfr) around the CAE, which is flanked by strictly positioned nucleosomes. Induction results in a loss of positioning of nucleosomes –1 and –2 downstream of the CAE, thus making the TATA box accessible. Simultaneous mutation of both motifs of the CAE, or of the CCAAT-box alone, also leads to shifting of nucleosome –1, which normally covers the TATA-box under repressing conditions, whereas mutation of the GTAATA element results in a narrowing of the nfr, indicating that the proteins that bind to both motifs in the CAE interact with chromatin, although in different ways. A cellulase-negative mutant strain, which has previously been shown to be altered in protein binding to the CAE, still displayed the induction-specific changes in nucleosome structure, indicating that none of the proteins that directly interact with CAE are affected, and that nucleosome rearrangement and induction of cbh2 expression are uncoupled. Interestingly, the carbon catabolite repressor Cre1 is essential for strict nucleosome positioning in the 5 regulatory sequences of cbh2 under all of the conditions tested, and induction can occur in a promoter that lacks positioned nucleosomes. These data suggest that Cre1, the Hap2/3/5 complex and the GTAATA-binding protein are all involved in nucleosome assembly on the cbh2 promoter, and that the latter two respond to inducing conditions by repositioning nucleosome –1.Communicated by C. A. M. J. J. van den Hondel     

<Emphasis Type="Italic">Agrobacterium</Emphasis>-mediated transformation (AMT) of <Emphasis Type="Italic">Trichoderma reesei</Emphasis> as an efficient tool for random insertional mutagenesis

Filamentous fungus Trichoderma reesei QM9414 was successfully transformed with Agrobacterium tumefaciens AGL-1 for random integration of transforming DNA (T-DNA). Co-cultivation of T. reesei conidia or protoplasts with A. tumefaciens in the presence of acetosyringone resulted in the formation of hygromycin B-resistant fungal colonies with high transformation frequency. Nine randomly selected resistant clones were proved to be stable through mitotic cell division. The integration of the hph gene into T. reesei genome was determined by PCR and dot blot analysis. Transgenic T. reesei strains were analyzed using TAIL-PCR for their T-DNA contents. The results showed that T-DNA inserts occurred evidently by fusing DNA at T-DNA borders via random recombination, which suggests that Agrobacterium-mediated transformation is a potentially powerful tool towards tagged mutagenesis and gene transfer technology for T. reesei.     

Sugar fermentation by <Emphasis Type="Italic">Fusarium oxysporum</Emphasis> to produce ethanol

As a first step in the research on ethanol production from lignocellulose residues, sugar fermentation by Fusarium oxysporum in oxygen-limited conditions is studied in this work. As a substrate, solutions of arabinose, glucose, xylose and glucose/xylose mixtures are employed. The main kinetic and yield parameters of the process are determined according to a time-dependent model. The microorganism growth is characterized by the maximum specific growth rate and biomass productivity, the substrate consumption is studied through the specific consumption rate and biomass yield, and the product formation via the specific production rate and product yields. In conclusion, F. oxysporum can convert glucose and xylose into ethanol with product yields of 0.38 and 0.25, respectively; when using a glucose/xylose mixture as carbon source, the sugars are utilized sequentially and a maximum value of 0.28 g/g ethanol yield is determined from a 50% glucose/50% xylose mixture. Although fermentation performance by F.␣oxysporum is somewhat lower than that of other fermenting microorganisms, its ability for simultaneous lignocellulose-residue saccharification and fermentation is considered as a potential advantage.     

An efficient process for production and purification of hyaluronic acid from <Emphasis Type="Italic">Streptococcus </Emphasis><Emphasis Type="Italic">equi</Emphasis> subsp. <Emphasis Type="Italic">zooepidemicus</Emphasis>

Growth of Streptococcus zooepidemicus in a 10 l bioreactor with 50 g sucrose/l and 10 g casein hydrolysate/l gave 5–6 g hyaluronic acid/l after 24–28 h. Purification of hyaluronic acid gave a recovery of 65% with the final material having an Mr of ∼4 × 10⁶ Da with less than 0.1% protein.     

Whole-genome metabolic model of <Emphasis Type="Italic">Trichoderma reesei</Emphasis> built by comparative reconstruction

Background

Trichoderma reesei is one of the main sources of biomass-hydrolyzing enzymes for the biotechnology industry. There is a need for improving its enzyme production efficiency. The use of metabolic modeling for the simulation and prediction of this organism’s metabolism is potentially a valuable tool for improving its capabilities. An accurate metabolic model is needed to perform metabolic modeling analysis.

Results

A whole-genome metabolic model of T. reesei has been reconstructed together with metabolic models of 55 related species using the metabolic model reconstruction algorithm CoReCo. The previously published CoReCo method has been improved to obtain better quality models. The main improvements are the creation of a unified database of reactions and compounds and the use of reaction directions as constraints in the gap-filling step of the algorithm. In addition, the biomass composition of T. reesei has been measured experimentally to build and include a specific biomass equation in the model.

Conclusions

The improvements presented in this work on the CoReCo pipeline for metabolic model reconstruction resulted in higher-quality metabolic models compared with previous versions. A metabolic model of T. reesei has been created and is publicly available in the BIOMODELS database. The model contains a biomass equation, reaction boundaries and uptake/export reactions which make it ready for simulation. To validate the model, we dem1onstrate that the model is able to predict biomass production accurately and no stoichiometrically infeasible yields are detected. The new T. reesei model is ready to be used for simulations of protein production processes.

     

<Emphasis Type="Italic">Ty</Emphasis>1<Emphasis Type="Italic">/copia</Emphasis>- and <Emphasis Type="Italic">Ty</Emphasis>3<Emphasis Type="Italic">/gypsy</Emphasis>-like DNA sequences in <Emphasis Type="Italic">Helianthus </Emphasis>species

Two repeated DNA sequences isolated from a partial genomic DNA library of Helianthus annuus, p HaS13 and p HaS211, were shown to represent portions of the int gene of a Ty3 /gypsy retroelement and of the RNase-Hgene of a Ty1 /copia retroelement, respectively. Southern blotting patterns obtained by hybridizing the two probes to BglII- or DraI-digested genomic DNA from different Helianthus species showed p HaS13 and p HaS211 were parts of dispersed repeats at least 8 and 7 kb in length, respectively, that were conserved in all species studied. Comparable hybridization patterns were obtained in all species with p HaS13. By contrast, the patterns obtained by hybridizing p HaS211 clearly differentiated annual species from perennials. The frequencies of p HaS13- and p HaS211-related sequences in different species were 4.3x10(4)-1.3x10(5) copies and 9.9x10(2)-8.1x10(3) copies per picogram of DNA, respectively. The frequency of p HaS13-related sequences varied widely within annual species, while no significant difference was observed among perennial species. Conversely, the frequency variation of p HaS211-related sequences was as large within annual species as within perennials. Sequences of both families were found to be dispersed along the length of all chromosomes in all species studied. However, Ty3 /gypsy-like sequences were localized preferentially at the centromeric regions, whereas Ty1/ copia-like sequences were less represented or absent around the centromeres and plentiful at the chromosome ends. These findings suggest that the two sequence families played a role in Helianthusgenome evolution and species divergence, evolved independently in the same genomic backgrounds and in annual or perennial species, and acquired different possible functions in the host genomes.     

Feeding strategies for <Emphasis Type="Italic">E. coli</Emphasis> fermentations demanding an enriched environment

The addition of a carbon nutrient feed to a fed-batch cultivation is often not enough to obtain satisfactory growth and/or production. In some cases, an additional feed with for example supplementary amino acids or complex media is required. This work presents the development of feeding strategies where more than one feed is required and the knowledge of the growth requirements is low. Simulations and cultivations with E. coli are shown using the proposed feed controllers which are based on a probing control concept. The strategies work well and they can be used to shorten the process development phase considerably.     

<Emphasis Type="Italic">Galleria</Emphasis><Emphasis Type="Italic">mellonella</Emphasis> are Resistant to <Emphasis Type="Italic">Pneumocystis</Emphasis><Emphasis Type="Italic">murina</Emphasis> Infection

Studying Pneumocystis has proven to be a challenge from the perspective of propagating a significant amount of the pathogen in a facile manner. The study of several fungal pathogens has been aided by the use of invertebrate model hosts. Our efforts to infect the invertebrate larvae Galleria mellonella with Pneumocystis proved futile since P. murina neither caused disease nor was able to proliferate within G. mellonella. It did, however, show that the pathogen could be rapidly cleared from the host.     

Comparative secretome analysis of <Emphasis Type="Italic">Trichoderma asperellum</Emphasis> S4F8 and <Emphasis Type="Italic">Trichoderma reesei</Emphasis> Rut C30 during solid-state fermentation on sugarcane bagasse

Background

The lignocellulosic enzymes of Trichoderma species have received particular attention with regard to biomass conversion to biofuels, but the production cost of these enzymes remains a significant hurdle for their commercial application. In this study, we quantitatively compared the lignocellulolytic enzyme profile of a newly isolated Trichoderma asperellum S4F8 strain with that of Trichoderma reesei Rut C30, cultured on sugarcane bagasse (SCB) using solid-state fermentation (SSF).

Results

Comparison of the lignocellulolytic enzyme profiles of S4F8 and Rut C30 showed that S4F8 had significantly higher hemicellulase and β-glucosidase enzyme activities. Liquid chromatography tandem mass spectrometry analysis of the two fungal secretomes enabled the detection of 815 proteins in total, with 418 and 397 proteins being specific for S4F8 and Rut C30, respectively, and 174 proteins being common to both strains. In-depth analysis of the associated biological functions and the representation of glycoside hydrolase family members within the two secretomes indicated that the S4F8 secretome contained a higher diversity of main and side chain hemicellulases and β-glucosidases, and an increased abundance of some of these proteins compared with the Rut C30 secretome.

Conclusions

In SCB SSF, T. asperellum S4F8 produced a more complex lignocellulolytic cocktail, with enhanced hemicellulose and cellobiose hydrolysis potential, compared with T. reesei Rut C30. This bodes well for the development of a more cost-effective and efficient lignocellulolytic enzyme cocktail from T. asperellum for lignocellulosic feedstock hydrolysis.

     

Improved xylanase production by<Emphasis Type="Italic"> Trichoderma reesei</Emphasis> grown on <Emphasis Type="SmallCaps">l</Emphasis>-arabinose and lactose or <Emphasis Type="SmallCaps">d</Emphasis>-glucose mixtures

Trichoderma reesei Rut C-30 was grown on eight different natural or rare aldopentoses as the main carbon source and on mixtures of an aldopentose with d-glucose or lactose. The fungal cells consumed all aldopentoses tested, except l-xylose and l-ribose. The highest total xylanase and cellulase activities were achieved when cells were grown on l-arabinose as the main carbon source. The total xylanase activity produced by cells grown on l-arabinose was even higher than that produced by cells grown on an equal amount of lactose. In co-metabolism of d-glucose (15 g l^–1) and l-arabinose (5 g l^–1), the total volumetric and specific xylanase productivities were improved (derepressed) approximately 23- and 18-fold, respectively, compared to a cultivation on only d-glucose (20 g l^–1). In a similar experiment, in which cells were grown on a mixture of lactose and l-arabinose, the xylanase productivity was approximately doubled, compared to a cultivation on only lactose. The cellulase productivities, however, were not improved by the addition of l-arabinose. Compared with a typical industrial fungal enzyme production process with lactose as the main carbon source, better volumetric and specific xylanase productivities were achieved both on a lactose/arabinose mixture and on a glucose/arabinose mixture.     

<Emphasis Type="Italic">Agrobacterium</Emphasis><Emphasis Type="Italic">tumefaciens</Emphasis>-mediated transformation of callus cells of <Emphasis Type="Italic">Crataegus</Emphasis><Emphasis Type="Italic">aronia</Emphasis>

A genetic transformation system has been developed for callus cells of Crataegus aronia using Agrobacterium tumefaciens. Callus culture was established from internodal stem segments incubated on Murashige and Skoog (MS) medium supplemented with 5 mg l⁻¹ Indole-3-butyric acid (IBA) and 0.5 mg l⁻¹ 6-benzyladenine (BA). In order to optimize the callus culture system with respect to callus growth and coloration, different types and concentrations of plant growth regulators were tested. Results indicated that the best average fresh weight of red colored callus was obtained on MS medium supplemented with 2 mg l⁻¹ 2,4-dichlorophenoxyacetic acid (2,4-D) and 1.5 mg l⁻¹ kinetin (Kin) (callus maintenance medium). Callus cells were co-cultivated with Agrobacterium harboring the binary plasmid pCAMBIA1302 carrying the mgfp5 and hygromycin phosphotransferase (hptII) genes conferring green fluorescent protein (GFP) activity and hygromycin resistance, respectively. Putative transgenic calli were obtained 4 weeks after incubation of the co-cultivated explants onto maintenance medium supplemented with 50 mg l⁻¹ hygromycin. Molecular analysis confirmed the integration of the transgenes in transformed callus. To our knowledge, this is the first time to report an Agrobacterium-mediated transformation system in Crataegus aronia.     

The impact of a single-nucleotide mutation of <Emphasis Type="Italic">bgl2</Emphasis> on cellulase induction in a <Emphasis Type="Italic">Trichoderma reesei</Emphasis> mutant

Background

The filamentous fungus Trichoderma reesei (anamorph of Hypocrea jecorina) produces increased cellulase expression when grown on cellulose or its derivatives as a sole carbon source. It has been believed that β-glucosidases of T. reesei not only metabolize cellobiose but also contribute in the production of inducers of cellulase gene expression by their transglycosylation activity. The cellulase hyper-producing mutant PC-3-7 developed in Japan has enhanced cellulase production ability when cellobiose is used as the inducer. The comparative genomics analysis of PC-3-7 and its parent revealed a single-nucleotide mutation within the bgl2 gene encoding intracellular β-glucosidase II (BGLII/Cel1a), giving rise to an amino acid substitution in PC-3-7, which could potentially account for the enhanced cellulase expression when these strains are cultivated on cellulose and cellobiose.

Results

To analyze the effects of the BGLII mutation in cellulase induction, we constructed both a bgl2 revertant and a disruptant. Enzymatic analysis of the transformant lysates showed that the strain expressing mutant BGLII exhibited weakened cellobiose hydrolytic activity, but produced some transglycosylation products, suggesting that the SNP in bgl2 strongly diminished cellobiase activity, but did not result in complete loss of function of BGLII. The analysis of the recombinant BGLII revealed that transglycosylation products might be oligosaccharides, composed probably of glucose linked β-1,4, β-1,3, or a mixture of both. PC-3-7 revertants of bgl2 exhibited reduced expression and inducibility of cellulase during growth on cellulose and cellobiose substrates. Furthermore, the effect of this bgl2 mutation was reproduced in the common strain QM9414 in which the transformants showed cellulase production comparable to that of PC-3-7.

Conclusion

We conclude that BGLII plays an important role in cellulase induction in T. reesei and that the bgl2 mutation in PC-3-7 brought about enhanced cellulase expression on cellobiose. The results of the investigation using PC-3-7 suggested that other mutation(s) in PC-3-7 could also contribute to cellulase induction. Further investigation is essential to unravel the mechanism responsible for cellulase induction in T. reesei.

     

Revision of the <Emphasis Type="Italic">Serrulati</Emphasis> species of <Emphasis Type="Italic">Penstemon</Emphasis> section <Emphasis Type="Italic">Saccanthera</Emphasis> subsection <Emphasis Type="Italic">Serrulati</Emphasis>

A revision of Penstemon sect. Saccanthera subsect. Serrulati includes a new species (P. salmonensis), a new variety (P. triphyllus var. infernalis), and the elevation of a subspecies to species (P. curtiflorus), bringing the total number of species to eight, which are keyed and described, complete with nomenclature and type citations.     

The <Emphasis Type="Italic">Caenorhabditis</Emphasis><Emphasis Type="Italic">briggsae</Emphasis> genome contains active <Emphasis Type="Italic">CbmaT1</Emphasis> and <Emphasis Type="Italic">Tcb1</Emphasis> transposons

The maT clade of transposons is a group of transposable elements intermediate in sequence and predicted protein structure to mariner and Tc transposons, with a distribution thus far limited to a few invertebrate species. We present evidence, based on searches of publicly available databases, that the nematode Caenorhabditis briggsae has several maT-like transposons, which we have designated as CbmaT elements, dispersed throughout its genome. We also describe two additional transposon sequences that probably share their evolutionary history with the CbmaT transposons. One resembles a fold back variant of a CbmaT element, with long (380-bp) inverted terminal repeats (ITRs) that show a high degree (71%) of identity to CbmaT1. The other, which shares only the 26-bp ITR sequences with one of the CbmaT variants, is present in eight nearly identical copies, but does not have a transposase gene and may therefore be cross mobilised by a CbmaT transposase. Using PCR-based mobility assays, we show that CbmaT1 transposons are capable of excising from the C. briggsae genome. CbmaT1 excised approximately 500 times less frequently than Tcb1 in the reference strain AF16, but both CbmaT1 and Tcb1 excised at extremely high frequencies in the HK105 strain. The HK105 strain also exhibited a high frequency of spontaneous induction of unc-22 mutants, suggesting that it may be a mutator strain of C. briggsae.