Identification of specific nonbridging phosphate oxygens important for DNA cleavage by human topoisomerase I

Methylphosphonate-bearing oligonucleotides are characterized by the replacement of one of the nonbridging oxygen atoms with a methyl group. While neutralizing the negative charge associated with the phosphodiester at the point of substitution, the methyl group also imparts chirality to the phosphorus atom. Herein we report the synthesis of a number of oligonucleotides containing isomerically pure S(p) and R(p) methylphosphonates at single positions for the purpose of investigating the hydrogen-bonding contacts necessary for human topoisomerase I function. It was possible to correlate these data to the recent X-ray crystal structure of a truncated form of the enzyme and demonstrate a severe decrease of cleavage efficiency when any of the nonbridging oxygen atoms upstream from the cleavage site was removed. Also observed was increased cleavage for oligonucleotides substituted with methylphosphonates downstream from the cleavage site. These effects were shown to be due primarily to alteration of the binding of the modified DNA substrates by human DNA topoisomerase I.     

Action of metal ions directly involved in the cleavage reaction of hammerhead ribozymes.

Recently, hammerhead ribozyme-mediated cleavage was analyzed as a function of the concentration of La3+ ions in the presence of a fixed concentration of Mg2+ ions so that the role could be monitored of metal ions that are directly involved in the cleavage reaction. The resultant bell-shaped curve for activation of cleavage was used to support the proposed double-metal-ion mechanism of catalysis. However, other studies demonstrated that binding of a metal ion to the pro-Rp oxygen (P9 oxygen) of the phosphate moiety of nucleotide A9 and N7 of nucleotide G10.1 is critical for efficient catalysis. In order to clarify the effect of this metal ion, we chemically synthesized hammerhead ribozyme (7-deaza-R34) that included a minimal modification, namely, an N7-deazaguanine residue in place of G10.1.     

Specificity of hammerhead ribozyme cleavage.

To be effective in gene inactivation, the hammerhead ribozyme must cleave a complementary RNA target without deleterious effects from cleaving non-target RNAs that contain mismatches and shorter stretches of complementarity. The specificity of hammerhead cleavage was evaluated using HH16, a well-characterized ribozyme designed to cleave a target of 17 residues. Under standard reaction conditions, HH16 is unable to discriminate between its full-length substrate and 3'-truncated substrates, even when six fewer base pairs are formed between HH16 and the substrate. This striking lack of specificity arises because all the substrates bind to the ribozyme with sufficient affinity so that cleavage occurs before their affinity differences are manifested. In contrast, HH16 does exhibit high specificity towards certain 3'-truncated versions of altered substrates that either also contain a single base mismatch or are shortened at the 5' end. In addition, the specificity of HH16 is improved in the presence of p7 nucleocapsid protein from human immunodeficiency virus (HIV)-1, which accelerates the association and dissociation of RNA helices. These results support the view that the hammerhead has an intrinsic ability to discriminate against incorrect bases, but emphasizes that the high specificity is only observed in a certain range of helix lengths.     

Kinetics of intermolecular cleavage by hammerhead ribozymes.

The hammerhead catalytic RNA effects cleavage of the phosphodiester backbone of RNA through a transesterification mechanism that generates products with 2'-3'-cyclic phosphate and 5'-hydroxyl termini. A minimal kinetic mechanism for the intermolecular hammerhead cleavage reaction includes substrate binding, cleavage, and product release. Elemental rate constants for these steps were measured with six hammerhead sequences. Changes in substrate length and sequence had little effect on the rate of the cleavage step, but dramatic differences were observed in the substrate dissociation and product release steps that require helix-coil transitions. Rates of substrate binding and product dissociation correlated well with predictions based on the behavior of simple RNA duplexes, but substrate dissociation rates were significantly faster than expected. Ribozyme and substrate alterations that eliminated catalytic activity increased the stability of the hammerhead complex. These results suggest that substrate destabilization may play a role in hammerhead catalysis.     

The hammerhead cleavage reaction in monovalent cations

Recently, Murray et al. (Chem Biol, 1998, 5:587-595) found that the hammerhead ribozyme does not require divalent metal ions for activity if incubated in high (> or =1 M) concentrations of monovalent ions. We further characterized the hammerhead cleavage reaction in the absence of divalent metal. The hammerhead is active in a wide range of monovalent ions, and the rate enhancement in 4 M Li+ is only 20-fold less than that in 10 mM Mg2+. Among the Group I monovalent metals, rate correlates in a log-linear manner with ionic radius. The pH dependence of the reaction is similar in 10 mM Mg2+, 4 M Li+, and 4 M Na+. The exchange-inert metal complex Co(NH3)3+ also supports substantial hammerhead activity. These results suggest that a metal ion does not act as a base in the reaction, and that the effects of different metal ions on hammerhead cleavage rates primarily reflect structural contributions to catalysis.     

Unexpected anisotropy in substrate cleavage rates by asymmetric hammerhead ribozymes.

RNA substrates which form relatively short helices I and III with hammerhead ribozymes are generally cleaved more rapidly than substrates which create longer binding helices. We speculated that for optimum cleavage rates, one of the helices needed to be relatively weak. To identify this helix, a series of ribozymes and substrates of varying lengths were made such that in the complex, helices I and III consisted of 5 and 10 bp respectively or vice versa. In two independent systems, substrates in the complexes with the shorter helix I and longer helix III were cleaved one to two orders of magnitude more rapidly than those in the complexes with the longer helix I and shorter helix III. Similar results were obtained whether the numbers of base pairs in helices I and III were limited either by the length of the hybridizing arms of the ribozyme or the length of the substrate. The phenomenon was observed for both all-RNA and DNA armed ribozymes. Thus, a relatively short helix I is required for fast cleavage rates in pre-formed hammer-head ribozyme-substrate complexes. When helix III has 10 bp, the optimum length for helix I is approximately 5 bp.     

Role of divalent metal ions in the hammerhead RNA cleavage reaction.

A hammerhead self-cleaving domain composed of two oligoribonucleotides was used to study the role of divalent metal ions in the cleavage reaction. Cleavage rates were measured as a function of MgCl2, MnCl2, and CaCl2 concentration in the absence or presence of spermine. In the presence of spermine, the rate vs metal ion concentration curves are broader, and lower concentrations of divalent ions are necessary for catalytic activity. This suggests that spermine can promote proper folding of the hammerhead and one or more divalent ions are required for the reaction. Six additional divalent ions were tested for their ability to support hammerhead cleavage. In the absence of spermine, rapid cleavage was observed with Co2+ while very slow cleavage occurred with Sr2+ and Ba2+. No detectable specific cleavage was observed with Cd2+, Zn2+, or Pb2+. However, in the presence of 0.5 mM spermine, rapid cleavage was observed with Zn2+ and Cd2+, and the rate with Sr2+ was increased, indicating that while these three ions could not promote proper folding of the hammerhead they were able to stimulate cleavage. These results suggest certain divalent ions either participate directly in the cleavage mechanism or are specifically involved in stabilizing the tertiary structure of the hammerhead. Additionally, an altered divalent metal ion specificity was observed when a unique phosphorothioate linkage was inserted at the cleavage site. The substitution of a sulfur for a nonbridging oxygen atom substantially reduced the affinity of an important Mg2+ ion necessary for efficient cleavage. In contrast, the reaction proceeds normally with Mn2+, presumably due to its ability to coordinate with both oxygen and sulfur.(ABSTRACT TRUNCATED AT 250 WORDS)     

A re-investigation of the thio effect at the hammerhead cleavage site.

The effect of introducing a phosphorothioate at the hammerhead cleavage site was investigated using a kinetically well-characterized hammerhead. In buffers containing Mg ion, the RP-phosphorothioate isomer cleaved 2000- to 80 000-fold slower than the SPisomer or the unmodified RNA substrate. Addition of low concentrations of several thiophilic metal ions, especially Cd2+, to these reactions is sufficient to fully restore the cleavage rate of the RPsubstrate without affecting cleavage rate of the all-oxygen or SPsubstrate. Thus, a model proposing coordination of a divalent metal ion to the pro-R oxygen at the hammerhead cleavage site appears justified.     

Analysis of the role of phosphate oxygens in the group I intron from Tetrahymena.

We have developed a quantitative substitution interference technique to examine the role of Pro-Rp oxygens in the phosphodiester backbone of RNA, using phosphorothioates as a structural probe. This approach is generally applicable to any reaction involving RNA in which the precursor and reaction products can be separated. We have applied the technique to identity structural requirements in the group I intron from Tetrahymena thermophila for catalysis of hydrolysis at the 3' splice site; 44 phosphate oxygens are important in 3' splice site hydrolysis. These include four or five oxygens previously observed to be important in exon ligation. Although phosphate oxygens having a functional significance can be found throughout the intron, the strongest phosphorothioate effects are closely associated with positions in the highly conserved intron core, which are likely to be involved in tertiary interactions, substrate recognition and catalysis.     

Identification and characterization of a divalent metal ion-dependent cleavage site in the hammerhead ribozyme.

We describe a new RNA cleavage motif, found in the hammerhead ribozyme. Cleavage occurs between nucleotides G8 and A9, yielding a free 5'-hydroxyl group and a 2',3'-cyclic phosphate. This cleavage is dependent upon divalent metal ions and is the first evidence for a metalloribozyme known to show preference for Zn(2+). Cleavage is also observed in the presence of Ni(2+), Co(2+), Mn(2+), Cd(2+), and Pb(2+), while negligible cleavage was detected in the presence of the alkaline-earth metal ions Mg(2+), Ca(2+), Sr(2+), and Ba(2+). A linear relationship between the logarithm of the rate and pH was observed for the Zn(2+)-dependent cleavage, which is indicative of proton loss in the cleavage mechanism, either prior to or in the rate-determining step. We postulate that a zinc hydroxide complex, bound to the known A9/G10.1 metal ion binding site, abstracts the proton from the 2'-hydroxyl group of G8, which attacks the A9 phosphate and initiates cleavage. This hypothesis is supported by a previously reported crystal structure [Murray, J. B., Terwey, D. P., Maloney, L., Karpeisky, A., Usman, N., Beigelman, L., and Scott, W. G. (1998) Cell 92, 665-673], which shows the conformation required for RNA cleavage and proximity of the 2'-hydroxyl group to the metal ion complex.     

Precise identification of cleavage sites involved in the unusual processing of trypanosome ribosomal RNA

The large subunit ribosomal RNA (LSRNA) of Trypanosoma brucei is unusual in being cleaved at multiple sites to yield six stable fragments of RNA. We report here the complete nucleotide sequence of two regions of the ribosomal DNA repeat unit. The first sequence includes all of the processing sites involved in the generation of one of the small LSRNA fragments. The second region encodes the trypanosome 5.8 S RNA. By RNA sequencing and S1 nuclease mapping, we have identified the processing sites involved in the generation of both of these small RNAs. On the basis of predicted secondary structure models, we infer that all the cleavages apparently occur near the junction of single- and double-stranded regions. The sites involved in the novel LSRNA processing show a clear symmetry with respect to a conserved region of ten base-pairs. No such signals are evident for the processing sites that generate the 5.8 S RNA.     

The role of the exocyclic amino groups of conserved purines in hammerhead ribozyme cleavage.

A series of 2 stranded hammerhead ribozymes has been synthesized in which single conserved adenosine residues have been replaced by nebularine or single guanosine residues by inosine. Comparison of the rates of trans-cleavage for the modified structures suggests the presence of interstrand non-Watson-Crick hydrogen bonding interactions including a GA:AG double mismatch. The exocyclic amino group of one of the guanosine residues is essential for cleavage.     

A helical twist-induced conformational switch activates cleavage in the hammerhead ribozyme

We have captured the structure of a pre-catalytic conformational intermediate of the hammerhead ribozyme using a phosphodiester tether formed between I and Stem II. This phosphodiester tether appears to mimic interactions in the wild-type hammerhead RNA that enable switching between nuclease and ligase activities, both of which are required in the replicative cycles of the satellite RNA viruses from which the hammerhead ribozyme is derived. The structure of this conformational intermediate reveals how the attacking nucleophile is positioned prior to cleavage, and demonstrates how restricting the ability of Stem I to rotate about its helical axis, via interactions with Stem II, can inhibit cleavage. Analogous covalent crosslinking experiments have demonstrated that imposing such restrictions on interhelical movement can change the hammerhead ribozyme from a nuclease to a ligase. Taken together, these results permit us to suggest that switching between ligase and nuclease activity is determined by the helical orientation of Stem I relative to Stem II.     

A Y form of hammerhead ribozyme trapped by photo-cross-links retains full cleavage activity.

The conformation in solution of a small bipartite I-III hammerhead ribozyme has been deduced from the photo-crosslinks formed between cleavable ribo-deoxysubstrates appropriately substituted with the probe deoxy-4-thiouridine and ribozyme residues. The ribozyme-substrate complex is able to adopt a Y-like structure with stems I and II in close proximity in the presence of 400 mM Na+ only. Indeed, a cross-link joining stem I (1.6) to loop II (AL2.4) forms in significant amount under these conditions. This cross-linked complex furthermore elicits, upon Mg2+ addition, a catalytic activity similar to that exhibited by the complexes cross-linked at the distal ends of either stem I or stem III or of the non-substituted bipartite complex. This shows that the reaction mechanism is fully compatible with a strong structural constraint between stems I and II and that sodium ions at high concentration (400 mM) are able to promote a proper folding of hammerhead ribozymes. None of the multiple cross-links formed within the ribozyme core (probe in position 16.1 or 1.1) was found catalytically active. The cross-link patterns nevertheless indicate a higher flexibility of the core in Na+ than in Mg2+. While most of the cross-links can be accommodated by the Y solution structure, some of them (16.1 to U4 and 2.1) definitely can not, suggesting that additional alternative inactive conformations exist in solution.     

Rapid transfer of oxygens from inorganic phosphate to glutamine catalyzed by Escherichia coli glutamine synthetase.

Measurements are reported on certain isotopic fluxes during the net conversion of glutamine, ADP and Pi to glutamate, NH3, and ATP by Escherichia coli glutamine synthetase (adenylylated form, Mn2+ activated) in presence of a hexokinase/glucose trap to remove the ATP formed during the reaction. The results show that the transfer of oxygens from Pi to glutamine is the most rapid of the measured isotopic interchanges, over five oxygens from Pi being transferred to glutamine for each glutamate formed by net reaction. Under similar conditions, the oxygen transfer from Pi to glutamate, was stimulated somewhat by an increase in the glutamate concentration but inhibited by an increase in the ammonia concentration. The enzyme from brain or peas did not show the rapid transfer of 18O from Pi to glutamine shown by the E. coli enzyme. Deductions are also made from the data about the availability of the oxygens of gamma-carboxyl of bound glutamate for reaction. The most logical explanation of the results with the E. coli enzyme is that the gamma-carboxyl group of bound glutamate has sufficient rotational freedom so that under conditions of rapid substrate interconversion either carboxylate oxygen can participate in the reaction. The results with the pea enzyme are consistent with hindered rotation of the gamma-care additional findings make likely a relative order of certain catalytic steps for the E. coli enzyme as follows: ATP release less than NH3 release less than glutamate release less than substrate interconversion less than glutamine release and Pi release and glutamate release less than ADP release.     

Configurationally defined phosphorothioate-containing oligoribonucleotides in the study of the mechanism of cleavage of hammerhead ribozymes.

The chemical synthesis is described of oligoribonucleotides containing a single phosphorothioate linkage of defined Rp and Sp configuration. The oligoribonucleotides were used as substrates in the study of the mechanism of cleavage of an RNA hammerhead domain having the phosphorothioate group at the cleavage site. Whereas the Rp isomer was cleaved only very slowly in the presence of magnesium ion, the rate of cleavage of the Sp isomer was only slightly reduced from that of the unmodified phosphodiester. This finding gives further evidence for the hypothesis that the magnesium ion is bound to the pro-R oxygen in the transition state of the hammerhead cleavage reaction. Also, inversion of configuration at phosphorus is confirmed for a two-stranded hammerhead.     

LNA nucleotides improve cleavage efficiency of singular and binary hammerhead ribozymes

Variants of trans-acting hammerhead ribozymes were modified with Locked Nucleic Acid (LNA) nucleotides to reduce their size, to improve access to their RNA target and to explore combinational properties of binary constructs. Using low Mg(2+) concentrations and low substrate and ribozyme concentrations, it was found that insertion of LNA monomers into the substrate binding arms allowed these to be shortened and results in a very active enzyme under both single and multiple turnover conditions. Incorporation of a mix of LNA and DNA residues further increased the multiple turnover cleavage activity. At high Mg(2+) concentrations or high substrate and ribozyme concentrations, the enhancing effect of LNA incorporation was even more prominent. Using LNA in the stem of Helix II diminished cleavage activity, but allowed deletion of the tetra-loop and thus separating the ribozyme into two molecules with each half binding to the substrate. Efficient, binary hammerhead ribozymes were pursued in a combinatorial approach using a 6-times 5 library, which was analysed concerning the best combinations, buffer conditions and fragment ratios.     

Enhancement of the cleavage rates of DNA-armed hammerhead ribozymes by various divalent metal ions.

In order to characterize structure-function relationships, the kinetic behavior of chimeric RNA/DNA ribozyme was compared with that of all RNA ribozyme. Determined kcat values were proven to represent the chemical-cleavage step and not the product-dissociation step. In agreement with the finding by Dahm and Uhlenbeck [Biochemistry 30, 9464-9469 (1991)], various metal ions, including Co2+ and Ca2+ with the ionic radius of 0.65 and 1.0 A, respectively, could support hammerhead cleavage for both types of ribozyme. Measurements of kinetic parameters in the presence of various divalent metal ions revealed that DNA arms always enhanced kcat values. Chemical-probing data using dimethylsulfate indicated that the catalytic-loop structures of all-RNA and chimeric ribozymes were nearly identical with the exception of enhanced termination of primer extension reactions at C3 in the case of the chimeric ribozyme. These observations and others demonstrate that DNA substitution in non-catalytic-loop regions increases chemical-cleavage activity, possibly with an accompanying very subtle change in the structure.     

2-Aminopurine as a real-time probe of enzymatic cleavage and inhibition of hammerhead ribozymes.

The design, synthesis and study of internally fluorescent hammerhead (HH) ribozymes, where changes in fluorescence parameters directly reflect the progress of the ribozyme's cleavage chemistry, are described. The approach relies on a HH substrate modified at position 1.1, proximal to the cleavage site, with 2-aminopurine (2AP), an intensely fluorescent adenosine isoster. The incorporation of 2AP, an unnatural nucleoside, does not interfere with the ribozyme folding and catalysis. Since 2AP is highly sensitive to environmental changes, its fluorescence is dramatically altered upon ribozyme-mediated cleavage of the substrate. This generates a measurable signal that directly reflects the progress of the ribozyme's reaction in real time. Identical pseudo first order rate constants are obtained for HH constructs using both continuous fluorescence monitoring and radioactive labeling. This rapid and real-time monitoring facilitates the study of ribozyme activity under different conditions (e.g., ionic strength, pH, etc.), and provides a useful assay to rapidly screen potential inhibitors. Three hitherto unknown HH inhibitors are presented and compared to neomycin B and chlortetracycline, two previously studied HH inhibitors. All three new small molecules, neo-acridine, guanidino-neomycin B, and [Delta-(Eilatin)Ru(bpy)(2)](2+), prove to be better inhibitors than neomycin B or chlortetracycline. Investigating HH inhibition under different ionic strengths reveals that the binding of neo-acridine, [Delta-(Eilatin)Ru(bpy)(2)](2+), and chlortetracycline to the HH involves hydrophobic interactions as their RNA affinities are largely unaffected by increasing salt concentrations. In contrast, neomycin B loses more than 50-fold of its inhibitory ability as the NaCl concentration is increased from 50 to 500mM.     

Complete RNA inverse folding: computational design of functional hammerhead ribozymes

Nanotechnology and synthetic biology currently constitute one of the most innovative, interdisciplinary fields of research, poised to radically transform society in the 21st century. This paper concerns the synthetic design of ribonucleic acid molecules, using our recent algorithm, RNAiFold, which can determine all RNA sequences whose minimum free energy secondary structure is a user-specified target structure. Using RNAiFold, we design ten cis-cleaving hammerhead ribozymes, all of which are shown to be functional by a cleavage assay. We additionally use RNAiFold to design a functional cis-cleaving hammerhead as a modular unit of a synthetic larger RNA. Analysis of kinetics on this small set of hammerheads suggests that cleavage rate of computationally designed ribozymes may be correlated with positional entropy, ensemble defect, structural flexibility/rigidity and related measures. Artificial ribozymes have been designed in the past either manually or by SELEX (Systematic Evolution of Ligands by Exponential Enrichment); however, this appears to be the first purely computational design and experimental validation of novel functional ribozymes. RNAiFold is available at http://bioinformatics.bc.edu/clotelab/RNAiFold/.