Synthesis of Biodegradable and Electroactive Tetraaniline Grafted Poly(ester amide) Copolymers for Bone Tissue Engineering

Biodegradable poly(ester amide)s have recently been used as biomaterials due to their desirable chemical and biological characteristics as well as their mechanical properties, which are amendable for material processing. In this study, electroactive tetraaniline (TA) grafted poly(ester amide)s were successfully synthesized and characterized. The poly(ester amide)s-graft-tetraaniline copolymers (PEA-g-TA) exhibited good electroactivity, mechanical properties, and biodegradability. The biocompatibility of the PEA-g-TA copolymers in vitro was systematically studied, which demonstrated that they were nontoxic and led to favorable adhesion and proliferation of mouse preosteoblastic MC3T3-E1 cells. Moreover, the PEA-g-TA copolymers stimulated by pulsed electrical signal could serve to promote the differentiation of MC3T3-E1 cells compared with TCPs. Hence, the biodegradable and electroactive PEA-g-TA copolymers possessed the properties in favor of the long-time potential application in vivo (electrical stimulation directly to the desired area) as bone repair scaffold materials in tissue engineering.     

Fractionation of functional polystyrenes,poly(ethylene oxide)s and poly(styrene)–b–poly(ethylene oxide) by liquid chromatography at the exclusion–adsorption transition point

The paper reports the fractionation of functional polystyrenes (PSs) and poly(ethylene oxide)s (PEOs) as well as their block copolymers, by liquid chromatography at the exclusion adsorption transition point (EATP–LC), also called “critical conditions” mode. In this specific elution mode (EATP–LC), the fractionation is only governed by the nature and the number of functions attached to the polymer backbone, independent of the molar mass distribution of the whole sample. Functional polystyrenes (α- and/or α,ω-alcohol-, acetal-, aldehyde- and acidic-PS) could be readily separated from non-functional polystyrenes under various chromatographic conditions. The technique also allowed the fractionation of poly(ethylene oxide)s and PS–PEO block copolymers. In the latter cases, moderately polar columns (grafted silica) and water-based polar eluents were required to obtain a satisfactory fractionation.     

Calorimetric study on pH-responsive block copolymer grafted lipid bilayers: rational design and development of liposomes

This study is focused on chimeric advanced drug delivery nanosystems and specifically on pH-sensitive liposomes, combining lipids and pH-responsive amphiphilic block copolymers. Chimeric liposomes composed of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and two different forms of block copolymers, i.e. poly(n-butylacrylate)-b-poly(acrylic acid) (PnBA-b-PAA) at 70 and 85% content of PAA at six different molar ratios, each form respectively. PAA block exhibits pH-responsiveness, because of the regulative group of –COOH. –COOH is protonated under acidic pH (pK_a ca. 4.2), while remains ionized under basic or neutral pH, leading to liposomes repulse and eventually stability. Lipid bilayers were prepared composed of DPPC and PnBA-b-PAA. Experiments were carried out using differential scanning calorimetry (DSC) in order to investigate their thermotropic properties. DSC indicated disappearance of pre-transition at all chimeric lipid bilayers and slight thermotropic changes of the main transition temperature. Chimeric liposomes have been prepared and their physicochemical characteristics have been explored by measuring the size, size distribution and ζ-potential, owned to the presence of pH-responsive polymer. At percentages containing medium to high amounts of the polymer, chimeric liposomes were found to retain their size during the stability studies. These results were well correlated with those indicated in the DSC measurements of lipid bilayers incorporating polymers in order to explain their physicochemical behavior. The incorporation of the appropriate amount of these novel pH-responsive block copolymers affects thus the cooperativity, the liposomal stabilization and imparts pH-responsiveness.     

Enhanced biorecognition and internalization of HPMA copolymers containing multiple or multivalent carbohydrate side-chains by human hepatocarcinoma cells.

N-(2-hydroxypropyl)methacrylamide (HPMA) copolymers containing pendant saccharide moieties (galactosamine, lactose, and triantennary galactose) were synthesized. The relationship between the content of saccharide moieties and three-dimensional arrangement of galactose residues and their biorecognition and internalization by human hepatocarcinoma HepG2 cells was investigated. The results obtained clearly indicated preferential binding of the trivalent galactose and the lactose-containing copolymers to these cells. The higher the saccharide moieties content in HPMA copolymers, the higher the levels of binding. The biorecognition of the glycosylated HPMA copolymers by HepG2 cells was inhibited by free lactose. The data on the internalization and subcellular trafficking of HPMA copolymer conjugates obtained by confocal fluorescence microscopy correlated well with the flow cytometric analysis of their biorecognition by target cells. Structural features of the glycosides responsible for the specific recognition of the HPMA copolymers have been identified. The results underline the potential of glycosylated HPMA copolymers for delivery of pharmaceutical agents to hepatocarcinoma cells.     

Effect of tyrosine-derived triblock copolymer compositions on nanosphere self-assembly and drug delivery

We have obtained structure-activity relations for nanosphere drug delivery as a function of the chemical properties of a tunable family of self-assembling triblock copolymers. These block copolymers are synthesized with hydrophobic oligomers of a desaminotyrosyl tyrosine ester and diacid and hydrophilic poly(ethylene glycol). We have calculated the thermodynamic interaction parameters for the copolymers with anti-tumor drugs to provide an understanding of the drug binding by the nanospheres. We find that there is an optimum ester chain length, C8, for nanospheres in terms of their drug loading capacities. The nanospheres release the drugs under dialysis conditions, with release rates strongly influenced by solution pH. The nanospheres, which are themselves non-cytotoxic, deliver the hydrophobic drugs very effectively to tumor cells as measured by cell killing activity in vitro and thus offer the potential for effective parentarel in vivo delivery of many hydrophobic therapeutic agents.     

Impact of silicone-based block copolymer surfactants on the surface and bulk microscopic organization of a biodegradable polymer,poly(epsilon-caprolactone)

Two amphiphilic AB block copolymers, containing a highly compatible poly(epsilon-caprolactone) (PCL) block connected to a poly(dimethylsiloxane) (PDMS) block having a low surface energy, are synthesized and characterized in terms of their dispersion in a presynthesized PCL matrix. X-ray photoelectron spectroscopy, contact angle measurements, atomic force microscopy, and optical microscopy are used to describe the evolution of the surface chemical composition, as well as the surface and bulk morphology of the PCL/copolymer blends as a function of the nature and weight surface free energy and the dispersion of the copolymers in the blends, leading to important modifications of the bulk and the surface morphology. These differences are interpreted in terms of the impact of the block copolymers on the semicrystalline polymer structure and related properties in the prospect of using the surfactants to improve the synthesis of PCL in supercritical CO(2).     

Reversibly shielded DNA polyplexes based on bioreducible PDMAEMA-SS-PEG-SS-PDMAEMA triblock copolymers mediate markedly enhanced nonviral gene transfection

Reversibly shielded DNA polyplexes based on bioreducible poly(dimethylaminoethyl methacrylate)-SS-poly(ethylene glycol)-SS-poly(dimethylaminoethyl methacrylate) (PDMAEMA-SS-PEG-SS-PDMAEMA) triblock copolymers were designed, prepared and investigated for in vitro gene transfection. Two PDMAEMA-SS-PEG-SS-PDMAEMA copolymers with controlled compositions, 6.6-6-6.6 and 13-6-13 kDa, were obtained by reversible addition-fragmentation chain transfer (RAFT) polymerization of dimethylaminoethyl methacrylate (DMAEMA) using CPADN-SS-PEG-SS-CPADN (CPADN: 4-cyanopentanoic acid dithionaphthalenoate; PEG: 6 kDa) as a macro-RAFT agent. Like their nonreducible PDMAEMA-PEG-PDMAEMA analogues, PDMAEMA-SS-PEG-SS-PDMAEMA triblock copolymers could effectively condense DNA into small particles with average diameters less than 120 nm and close to neutral zeta potentials (0 ～ +6 mV) at and above an N/P ratio of 3/1. The resulting polyplexes showed excellent colloidal stability against 150 mM NaCl, which contrasts with polyplexes of 20 kDa PDMAEMA homopolymer. In the presence of 10 mM dithiothreitol (DTT), however, polyplexes of PDMAEMA-SS-PEG-SS-PDMAEMA were rapidly deshielded and unpacked, as revealed by significant increase of positive surface charges as well as increase of particle sizes to over 1000 nm. Release of DNA in response to 10 mM DTT was further confirmed by gel retardation assays. These polyplexes, either stably or reversibly shielded, revealed a low cytotoxicity (over 80% cell viability) at and below an N/P ratio of 12/1. Notably, in vitro transfection studies showed that reversibly shielded polyplexes afforded up to 28 times higher transfection efficacy as compared to stably shielded control under otherwise the same conditions. Confocal laser scanning microscope (CLSM) studies revealed that reversibly shielded polyplexes efficiently delivered and released pDNA into the perinuclei region as well as nuclei of COS-7 cells. Hence, reduction-sensitive reversibly shielded DNA polyplexes based on PDMAEMA-SS-PEG-SS-PDMAEMA are highly promising for nonviral gene transfection.     

Liquid,phenylazide-end-capped copolymers of epsilon-caprolactone and trimethylene carbonate: preparation,photocuring characteristics,and surface layering

Photoreactive phenylazide-end-capped liquid copolymers were prepared by ring-opening copolymerization of epsilon-caprolactone (CL) and trimethylene carbonate (TMC) at an equimolar monomer feed ratio in the presence of a polyol, namely, a low-molecular-weight alcohol (di-, tri-, and tetraol) or poly(ethylene glycol) (PEG) as an initiator and tin(II) 2-ethylhexanoate as a catalyst, followed subsequently by phenylazide derivatization at their hydroxyl terminus. These tri- and tetrabranched liquid copolymers (precursors) with a molecular weight from approximately 2500 to 7000 g/mol were cross-linked to yield insoluble solids by ultraviolet (UV) light irradiation. The photocuring rate increased with increasing functionality of phenylazide and UV intensity and decreasing thickness of the liquid film of precursors. The photo-cross-linkability of phenylazide-derivatized liquid copolymers was found to be higher than that of the corresponding coumarin-derivatized liquid copolymers. Poly(lactide) (PLA) films surface-layered with photocured copolymers were prepared by coating surfaces with phenylazide-derivatized copolymers and their subsequent photoirradiation. Endothelial cells adhered well on the nontreated PLA and low-molecular-weight alcohol-based copolymer-layered and photocured films. Little cell adhesion was observed on the hydrolytically surface-eroded PLA film and the PEG-based copolymer-layered film. When a phenylazide-derivatized hexapeptide with the cell-adhesion tripeptidyl sequence, Arg-Gly-Asp (RGD), common to cell adhesive proteins, was photoimmobilized on these surfaces, the surfaces became cell adhesive. Microarchitectured surfaces, which were prepared by sequential procedures of surface coating and photocuring using a photomask with lattice windows, produced regionally differentiated cell adhesiveness.     

Norbornene-Derived Poly-d-lysine Copolymers as Quantum Dot Carriers for Neuron Growth

Synthesis of norbornene derived phosphonate (1), poly-d-lysine (2), and phopholipid (3) monomers and their complete characterizations are studied. Ring-opening metathesis polymerizations (ROMP) of monomers (1-3) produce well-defined copolymers, CP(1) and CP(2). (1)H NMR along with FT-IR spectroscopy characterization confirms the copolymer formation, while gel permeation chromatography (GPC) analysis suggests the formation of polymers with fairly narrow molecular weight distributions. Upon following the well-known ligand exchange methods these copolymers produce CdSe-bound copolymers, CP(3) and CP(4). Dynamic light scattering and transmission electron microscopy measures the size of these CdSe bound copolymers, while (31)P NMR suggests the formation of CP(3) and CP(4). The results from the experiments of these copolymers on Neuro2A cells suggest that the novel PDL-anchored nanomaterial show their ability to polarize neuronal growth and differentiation.     

Well-controlled cationic water-soluble phospholipid polymer-DNA nanocomplexes for gene delivery

The facile synthesis of biocompatible and nontoxic gene delivery vectors has been the focus of research in recent years due to the high potential in treating genetic diseases. 2-Methacryloxyethyl phosphorylcholine (MPC) copolymers were recently studied for their ability to produce nontoxic and biocompatible materials. The synthesis of well-defined and water-soluble MPC polymer based cationic vectors for gene delivery purposes was therefore attractive, due to the potential excellent biocompatibility of the resulting copolymers. Herein, cationic MPC copolymers of varying architectures (block versus random) were produced by the reversible addition--fragmentation chain transfer (RAFT) polymerization technique. The copolymers produced were evaluated for their gene delivery efficacy in the presence and absence of serum. It was found that copolymer architectures and molecular weights do affect their gene delivery efficacy. The statistical copolymers produced larger particles, and showed poor gene transfection efficiency as compared to the diblock copolymers. The diblock copolymers served as efficient gene delivery vectors, in both the presence and absence of serum in vitro. To the best of our knowledge, this is the first report where the effect of architecture of MPC based copolymer on gene delivery efficacy has been studied.     

Supramolecular hydrogels formed from biodegradable ternary COS-g-PCL-b-MPEG copolymer with α-cyclodextrin and their drug release

On the basis of the synthesis of novel biodegradable amphiphilic MPEG-b-PCL-grafted chitooligosaccharide (COS-g-PCL-b-MPEG) copolymers, supramolecular hydrogels were fabricated rapidly via their inclusion complexation with α-cyclodextrin (α-CD) in aqueous solutions. The graft copolymers were characterized by ¹H NMR spectroscopy, gel permeation chromatography (GPC), and fluorescence measurement, and the supramolecular structure of the resultant hydrogels was confirmed by X-ray diffraction measurements. Rheological studies of as-obtained hydrogels indicate that the physical properties could be modulated by controlling the concentration and the graft content of the graft copolymers as well as the molar feed ratio of the graft to α-CD. The in vitro release kinetics studies of bovine serum albumin (BSA) entrapped in the hydrogels show that the drug release profiles are dependent on the supramolecular hydrogel compositions.     

Styrene-spaced copolymers including anthraquinone and β-O-4 lignin model units: synthesis, characterization and reactivity under alkaline pulping conditions

A series of random copoly(styrene)s has been synthesized via radical polymerization of functionalized anthraquinone (AQ) and β-O-4 lignin model monomers. The copolymers were designed to have a different number of styrene spacer groups between the AQ and β-O-4 lignin side chains aiming at investigating the distance effects on AQ/β-O-4 electron transfer mechanisms. A detailed molecular characterization, including techniques such as size exclusion chromatography, MALDI-TOF mass spectrometry, and (1)H, (13)C, (31)P NMR and UV-vis spectroscopies, afforded quantitative information about the composition of the copolymers as well as the average distribution of the AQ and β-O-4 groups in the macromolecular structures. TGA and DSC thermal analysis have indicated that the copolymers were thermally stable under regular pulping conditions, revealing the inertness of the styrene polymer backbone in the investigation of electron transfer mechanisms. Alkaline pulping experiments showed that close contact between the redox active side chains in the copolymers was fundamental for an efficient degradation of the β-O-4 lignin model units, highlighting the importance of electron transfer reactions in the lignin degradation mechanisms catalyzed by AQ. In the absence of glucose, AQ units oxidized phenolic β-O-4 lignin model parts, mainly by electron transfer leading to vanillin as major product. By contrast, in presence of glucose, anthrahydroquinone units (formed by reduction of AQ) reduced the quinone-methide units (issued by dehydration of phenolic β-O-4 lignin model part) mainly by electron transfer leading to guaiacol as major product. Both processes were distance dependent.     

Synthesis and characterization of triblock copolymers of methoxy poly(ethylene glycol) and poly(propylene fumarate)

Amphiphilic block copolymers were synthesized by transesterification of hydrophilic methoxy poly(ethylene glycol) (mPEG) and hydrophobic poly(propylene fumarate) (PPF) and characterized. Four block copolymers were synthesized with a 2:1 mPEG:PPF molar ratio and mPEGs of molecular weights 570, 800, 1960, and 5190 and PPF of molecular weight 1570 as determined by NMR. The copolymers synthesized with mPEG of molecular weights 570 and 800 had 1.9 and 1.8 mPEG blocks per copolymer, respectively, as measured by NMR, representing an ABA-type block copolymer. The number of mPEG blocks of the copolymer decreased with increasing mPEG block length to as low as 1.5 mPEG blocks for copolymer synthesized with mPEG of molecular weight 5190. At a concentration range of 5-25 wt % in phosphate-buffered saline, copolymers synthesized with mPEG molecular weights of 570 and 800 possessed lower critical solution temperatures (LCST) between 40 and 45 degrees C and between 55 and 60 degrees C, respectively. Aqueous solutions of copolymer synthesized with mPEG 570 and 800 also experienced thermoreversible gelation. The sol-gel transition temperature was dependent on the sodium chloride concentration as well as the mPEG block length. The copolymer synthesized from mPEG 570 had a transition temperature between 40 and 20 degrees C with salt concentrations between 1 and 10 wt %, while the sol-gel transition temperatures of the copolymer synthesized from mPEG molecular weight 800 were higher in the range 75-30 degrees C with salt concentrations between 1 and 15 wt %. These novel thermoreversible copolymers are the first biodegradable copolymers with unsaturated double bonds along their macromolecular chain that can undergo both physical and chemical gelation and hold great promise for drug delivery and tissue engineering applications.     

A new method of controlled grafting modification of chitosan via nitroxide-mediated polymerization using chitosan-TEMPO macroinitiator

The controlled graft modification of chitosan has first been achieved by nitroxide-mediated polymerization using chitosan-TEMPO macroinitiator. Chitosan-TEMPO macroinitiator was obtained from the (60)Co gamma-ray irradiation of N-phthaloylchitosan and 4-hydroxy-TEMPO in DMF under argon atmosphere. The graft copolymers were characterized by (1)H nuclear magnetic resonance ((1)H NMR), Fourier transform infrared spectrometer (FT-IR), X-ray powder diffractometer (XRD) and high performance particle sizer (HPPS). The results indicate that the graft copolymers were successfully synthesized and that the graft polymerization was well controlled by the nitroxide-mediated process. The size distribution of chitosan-g-polystyrene in benzene is very narrow, which may be associated with the "well-defined" polystyrene (PSt) onto chitosan from nitroxide-mediated polymerization. This work provides a new method to prepare chitosan grafting copolymers with controlled molecular weights and "well-defined" structures.     

Effect of copolymers of N-vinylpyrrolidone and acrylic acid on individual stages of immunogenesis]

The analysis of NA-5 and NA-6, copolymers of acrylic acid and N-vinylpyrrolidone obtained by the method of radical copolymerization, indicated that these copolymers, while having no toxicity characteristic of polyacrylic acid known to be a powerful agent for stimulating immunogenesis, increased the migration of stem cells, and the processes of T and B lymphocyte spreading, as well as sharply enhanced the effect of interaction between T and B lymphocytes and partially replaced the helper function of T cells; all these actions finally enhanced immune response in the body. A decrease in the toxicity of copolymers was found to be in linear relationship with the percentage of the links of acrylic acid, whereas the adjuvant activity of the copolymers remained unchanged.     

Copolymers of ethylene imine and N-(2-hydroxyethyl)-ethylene imine as tools to study effects of polymer structure on physicochemical and biological properties of DNA complexes

A series of five poly[(ethylene imine)-co-N-(2-hydroxyethyl-ethylene imine)] copolymers with similar molecular weights and different degrees of branching was established to study structure-function relationship with regard to physicochemical and biological properties as gene delivery systems. Copolymers were synthesized by acid-catalyzed ring-opening copolymerization of aziridine and N-(2-hydroxyethyl)-aziridine in aqueous solution and characterized by GPC-MALLS, (1)H- and (13)C NMR, IR, potentiometric titration, and ion exchange chromatography. Complexation of DNA was determined by agarose gel electrophoresis, and complex sizes were quantitated by PCS. Cytotoxicity of the copolymers in fibroblasts was assessed by MTT-assay, LDH-assay, and hemolysis. The transfection efficiency was determined using the reporter plasmid pGL3 in 3T3 mouse fibroblasts. The copolymers obtained by solution polymerization had relatively low molecular weights of about 2000 Da, and the degree of branching increased with increasing ethylene imine ratio. The pK(a) as well as the buffer capacity increased proportional to the number of primary and secondary amines. Higher branched polymers showed stronger complexation and condensation of DNA, formed smaller polymer/DNA complexes, and induced the expression of plasmids to a higher extent than less branched polymers. In vitro cytotoxic effects and the hemolysis of erythrocytes decreased with decreased branching. Our results indicate that the basicity and degree of protonation of the polymers depending on their amount of primary and secondary amines seem to be important factors both for their transfection efficiency and for their cytotoxicity in gene transfer.     

Thermoreversible hydrogels from RAFT-synthesized BAB triblock copolymers: steps toward biomimetic matrices for tissue regeneration

Narrowly dispersed, temperature-responsive BAB block copolymers capable of forming physical gels under physiological conditions were synthesized via aqueous reversible addition fragmentation chain transfer (RAFT) polymerization. The use of a difunctional trithiocarbonate facilitates the two-step synthesis of BAB copolymers with symmetrical outer blocks. The outer B blocks of the triblock copolymers consist of poly(N-isopropylacrylamide) (PNIPAM) and the inner A block consists of poly(N,N-dimethylacrylamide). The copolymers form reversible physical gels above the phase transition temperature of PNIPAM at concentrations as low as 7.5 wt % copolymer. Mechanical properties similar to collagen, a naturally occurring polypeptide used as a three-dimensional in vitro cell growth scaffold, have been achieved. Herein, we report the mechanical properties of the gels as a function of solvent, polymer concentration, and inner block length. Structural information about the gels was obtained through pulsed field gradient NMR experiments and confocal microscopy.     

Colchicine inhibition of microtubule assembly via copolymer formation.

Colchicine.tubulin complex (CD) inhibits microtubule assembly. We examined this inhibition under conditions where spontaneous nucleation was suppressed and assembly was restricted to an elongation polymerization. We found that CD inhibited assembly by a mechanism which preserved the ability of microtubule ends to add tubulin. This observation is inconsistent with the end-poisoning model which recently was proposed as a general mechanism for assembly inhibition by CD. Our data are consistent with the following model: (a) microtubules formed in the presence of CD are CD-tubulin copolymers; (b) these copolymers can have appreciable numbers of incorporated CDs which are, most likely, randomly distributed in the copolymers; (c) CD-tubulin copolymers have assembly-competent ends with association and dissociation rate constants which decrease as the CD/tubulin ratio in the copolymers, (CD/T)MT, increases; and (d) the critical tubulin concentrations required for microtubule assembly increase in the presence of CD, indicating that copolymer affinity for tubulin decreases as (CD/T)MT increases.     

Polymethacrylate-based nitric oxide donors with pendant N-diazeniumdiolated alkyldiamine moieties: synthesis, characterization, and preparation of nitric oxide releasing polymeric coatings

A series of new nitric oxide (NO) releasing copolymers have been prepared by covalently anchoring alkyldiamine side chains onto a polymethacrylate-based polymer backbone, followed by NO addition to form the desired pendant diazeniumdiolate structures. The resulting diazeniumdiolated copolymers were characterized via UV spectroscopy, and their proton-driven decomposition to release NO was also examined by UV and FTIR as well as chemiluminescence. Polymers with up to 22.1 mol % of incorporated amine sites that can be converted to corresponding diazeniumdiolates could be prepared, and such polymers release up to 0.94 micromol/mg of NO. Further, novel NO releasing polymeric coatings were formulated by doping one of the new polymethacrylate-based NO donors within inert polymeric matrixes. Biodegradable poly(lactide-co-glycolide) was employed as a film additive to greatly prolong the NO release of such coatings by continuously generating protons within the organic phase of the polymeric films, thereby driving decomposition of the diazeniumdiolates.     

Deformation responses of a physically cross-linked high molecular weight elastin-like protein polymer

Recombinant protein polymers were synthesized and examined under various loading conditions to assess the mechanical stability and deformation responses of physically cross-linked, hydrated, protein polymer networks designed as triblock copolymers with central elastomeric and flanking plastic-like blocks. Uniaxial stress-strain properties, creep and stress relaxation behavior, as well as the effect of various mechanical preconditioning protocols on these responses were characterized. Significantly, we demonstrate for the first time that ABA triblock protein copolymers when redesigned with substantially larger endblock segments can withstand significantly greater loads. Furthermore, the presence of three distinct phases of deformation behavior was revealed upon subjecting physically cross-linked protein networks to step and cyclic loading protocols in which the magnitude of the imposed stress was incrementally increased over time. We speculate that these phases correspond to the stretch of polypeptide bonds, the conformational changes of polypeptide chains, and the disruption of physical cross-links. The capacity to select a genetically engineered protein polymer that is suitable for its intended application requires an appreciation of its viscoelastic characteristics and the capacity of both molecular structure and conditioning protocols to influence these properties.