Using lysozyme amyloid fibrils as a means of scavenging aggregation-inhibiting compounds

The aggregation of amyloidogenic proteins is linked to several amyloidoses, including neurodegenerative disorders, such as Alzheimer's or Parkinson's disease. Currently there are very few effective cures or treatments available, despite countless screenings and clinical trials. One of the most challenging aspects of potential anti-amyloid drug discovery is finding which molecules are the actual inhibitors out of mixtures, which may contain hundreds of distinct compounds. Considering that anti-amyloid compounds would interact with the aggregate, this affinity could be used as a means of separating such compounds from ineffective ones. In this work, we attempt to scavenge potential aggregation-inhibiting molecules out of four, different complexity mixtures, ranging from oxidized gallic acid to tea extract, using lysozyme amyloid fibrils. We show that these compounds bind to aggregates with high affinity and can be later separated from them by different methods.     

Protein engineering as a strategy to avoid formation of amyloid fibrils

The activation domain of human procarboxypeptidase A2 (ADA2h) aggregates following thermal or chemical denaturation at acidic pH. The aggregated material contains well-defined ordered structures with all the characteristics of the fibrils associated with amyloidotic diseases. Variants of ADA2h containing a series of mutations designed to increase the local stability of each of the two helical regions of the protein have been found to have a substantially reduced propensity to form fibrils. This arises from a reduced tendency of the denatured species to aggregate rather than from a change in the overall stability of the native state. The reduction in aggregation propensity may result from an increase in the stability of local relative to longer range interactions within the polypeptide chain. These findings show that the intrinsic ability of a protein to form amyloid can be altered substantially by protein engineering methods without perturbing significantly its overall stability or activity. This suggests new strategies for combating diseases associated with the formation of aggregated proteins and for the design of novel protein or peptide therapeutics.     

Solution conditions can promote formation of either amyloid protofilaments or mature fibrils from the HypF N-terminal domain

The HypF N-terminal domain has been found to convert readily from its native globular conformation into protein aggregates with the characteristics of amyloid fibrils associated with a variety of human diseases. This conversion was achieved by incubation at acidic pH or in the presence of moderate concentrations of trifluoroethanol. Electron microscopy showed that the fibrils grown in the presence of trifluoroethanol were predominantly 3-5 nm and 7-9 nm in width, whereas fibrils of 7-9 nm and 12-20 nm in width prevailed in samples incubated at acidic pH. These results indicate that the assembly of protofilaments or narrow fibrils into mature amyloid fibrils is guided by interactions between hydrophobic residues that may remain exposed on the surface of individual protofilaments. Therefore, formation and isolation of individual protofilaments appears facilitated under conditions that favor the destabilization of hydrophobic interactions, such as in the presence of trifluoroethanol.     

Controlling the dimensions of amyloid fibrils: toward homogenous components for bionanotechnology

Amyloid fibrils have been recognized as having potential in a variety of bionanotechnological applications. However, realization of these applications is constrained by a lack of control over morphology and alignment, both crucial for potential end uses. This article focuses on the use of growth and storage conditions to control the length of amyloid fibrils formed from bovine insulin, with length distributions constructed from transmission electron microscopy (TEM) images. Growth temperature, pH, protein concentration, and storage conditions were examined and were seen to offer a range of conditions that favor different length distribution. The use of amyloid fibrils as nanowires is one area where control of fibril dimensions is desirable, for experimental setup and endpoint applications. The conductive properties of fibrils formed from bovine insulin are presented, with these insulin fibrils being shown to have high resistivity in their unmodified state, with current values in the nanoamp range. These low current values can be increased via modification, or the fibrils used in their native state in applications where low current values are desirable. These findings, coupled with the ability to predict and select for various insulin amyloid fibril dimensions, enhances their utility as nanomaterials.     

Topological investigation of amyloid fibrils obtained from beta2-microglobulin

Amyloid fibrils of patients treated with regular hemodialysis essentially consists of beta2-microglobulin (beta2-m) and its truncated species DeltaN6beta2-m lacking six residues at the amino terminus. The truncated fragment has a more flexible three-dimensional structure and constitutes an excellent candidate for the analysis of a protein in the amyloidogenic conformation. The surface topology of synthetic fibrils obtained from intact beta2-m and truncated DeltaN6beta2-m was investigated by the limited proteolysis/mass spectrometry approach that appeared particularly suited to gain insights into the structure of beta2-m within the fibrillar polymer. The distribution of prefential proteolytic sites observed in both fibrils revealed that the central region of the protein, which had been easily cleaved in the full-length globular beta2-m, was fully protected in the fibrillar form. In addition, the amino- and carboxy-terminal regions of beta2-m became exposed to the solvent in the fibrils, whereas they were masked completely in the native protein. These data indicate that beta2-m molecules in the fibrils consist of an unaccessible core comprising residues 20-87 with the strands I and VIII being not constrained in the fibrillar polymer and exposed to the proteases. Moreover, proteolytic cleavages observed in vitro at Lys 6 and Lys 19 reproduce specific cleavages that have to occur in vivo to generate the truncated forms of beta2-m occurring in natural fibrils. On the basis of these data, a possible mechanism for fibril formation from native beta2-m is discussed and an explanation for the occurrence of truncated protein species in natural fibrils is given.     

The parallel superpleated beta-structure as a model for amyloid fibrils of human amylin

Human amylin is a 37 amino acid residue peptide hormone whose fibrillogenesis has been correlated with type 2 diabetes. These fibrils are rope-like bundles of several 5nm diameter protofilaments. Here, we propose, as a model for the protofilament, a variant of the parallel superpleated beta-structure previously derived for amyloid filaments of the yeast prion Ure2p. In the amylin model, individual polypeptides from residues 9 to 37 have a planar S-shaped fold with three beta-strands. These serpentines are stacked in register, with a 0.47 nm axial rise and a small rotational twist per step, generating an array of three parallel beta-sheets in cross-beta conformation. The interior, the two "bays" sandwiched between adjacent sheets, are occupied by non-polar and by polar/uncharged residues that are predicted to form H-bonded ladders, similar to those found in beta-helical proteins. The N-terminal peptide containing a disulfide bond occupies an extraneous peripheral position in the protofilament. The left-handed twist of the beta-sheets is shown to underlie left-handed coiling of amylin protofilaments in fibrils. The model is consistent with current biophysical, biochemical and genetic data and, in particular, affords a plausible explanation for why rodent amylin does not form fibrils.     

Chiral superstructures of insulin amyloid fibrils

Hydrodynamic forces are capable of inducing structural order in dispersed solid phases, and of causing symmetry-breaking when chiral crystals precipitate from an achiral liquid phase. Until it was observed upon vortex-assisted fibrillation of insulin, such behavior had been thought to be confined to few unbiological systems. In this paper we are discussing chiroptical properties of two chiral variants of insulin amyloid, termed +ICD and -ICD, which form during the process of chiral bifurcation in vortexed solutions of aggregating insulin. As conventional measurements of circular dichroism of solid, anisotropic substances are particularly vulnerable to overlapping influences of linear birefringence and linear dichroism, we have employed complementary tools including dedicated universal chiroptical spectrophotometer to rule out such artifacts. We propose that the strong chiroptical properties of +ICD and -ICD insulin fibrils are an aspect of genuine superstructural chirality of amyloid fibrils and of powerful excitonic couplings taking place within them. A comparison of thioflavin T complexes with fibrils formed by insulin and polyglutamic acid suggests that the extrinsic Cotton effect stemming from the level of single twisted dye molecules is weaker, although diagnostically useful, and cannot account for the overall magnitude of ICD of the dye bound to ±ICD insulin amyloid.     

Dichotomous versus palm-type mechanisms of lateral assembly of amyloid fibrils

Despite possessing a common cross-beta core, amyloid fibrils are known to exhibit great variations in their morphologies. To date, the mechanism responsible for the polymorphism in amyloid fibrils is poorly understood. Here we report that two variants of mammalian full-length prion protein (PrP), hamster (Ha) and mouse (Mo) PrPs, produced morphologically distinguishable subsets of mature fibrils under identical solvent conditions. To gain insight into the origin of this morphological diversity we analyzed the early stages of polymerization. Unexpectedly, we found that despite a highly conserved amyloidogenic region (94% identity within the residues 90-230), Ha and Mo PrPs followed two distinct pathways for lateral assembly of protofibrils into mature, higher order fibrils. The protofibrils of Ha PrP first formed irregular bundles characterized by a peculiar palm-type shape, which ultimately condensed into mature fibrils. The protofibrils of Mo PrP, on the other hand, associated in pairs in a pattern resembling dichotomous coalescence. These pathways are referred to here as the palm-type and dichotomous mechanisms. Two distinct mechanisms for lateral assembly explain striking differences in morphology of mature fibrils produced from closely related Mo and Ha PrPs. Remarkable similarities between subtypes of amyloid fibrils generated from different proteins and peptides suggest that the two mechanisms of lateral assembly may not be limited to prion proteins but may be a common characteristic of polymerization of amyloidogenic proteins and peptides in general.     

Kinetically controlled thermal response of beta2-microglobulin amyloid fibrils

Calorimetric measurements were carried out using a differential scanning calorimeter in the temperature range from 10 to 120 degrees C for characterizing the thermal response of beta2-microglobulin amyloid fibrils. The thermograms of amyloid fibril solution showed a remarkably large decrease in heat capacity that was essentially released upon the thermal unfolding of the fibrils, in which the magnitude of negative heat capacity change was not explicable in terms of the current accessible surface area model of protein structural thermodynamics. The heat capacity-temperature curve of amyloid fibrils prior to the fibril unfolding exhibited an unusual dependence on the fibril concentration and the heating rate. Particularly, the heat needed to induce the thermal response was found to be linearly dependent on the heating rate, indicating that its thermal response is under a kinetic control and precluding the interpretation in terms of equilibrium thermodynamics. Furthermore, amyloid fibrils of amyloid beta peptides also exhibited a heating rate-dependent exothermic process before the fibril unfolding, indicating that the kinetically controlled thermal response may be a common phenomenon to amyloid fibrils. We suggest that the heating rate-dependent negative change in heat capacity is coupled to the association of amyloid fibrils with characteristic hydration pattern.     

Polymorphism and ultrastructural organization of prion protein amyloid fibrils: an insight from high resolution atomic force microscopy

Amyloid fibrils were produced from the full-length mouse prion protein (PrP) under solvent conditions similar to those used for the generation of synthetic prions from PrP 89-230. Analysis of the ultrastructure by atomic force microscopy revealed extremely broad polymorphism in fibrils formed under a single growth condition. Fibrils varied with respect to the number of constitutive filaments and the manner in which the filaments were assembled. PrP polymerization was found to show several peculiar features: (i) the higher-order fibrils/ribbons were formed through a highly hierarchical mechanism of assembly of lower-order fibrils/ribbons; (ii) the lateral assembly proceeded stepwise; at each step, a semi-stable fibrillar species were generated, which were then able to enter the next level of assembly; (iii) the assembly of lower into higher-order fibrils occurred predominantly in a vertical dimension via stacking of ribbons on top of each other; (iv) alternative modes of lateral association co-existed under a single growth condition; (iv) the fibrillar morphology changed even within individual fibrils, illustrating that alternative modes of filament assembly are inter-convertible and thermodynamically equivalent. The most predominant fibrillar types were classified into five groups according to their height, each of which was divided in up to three subgroups according to their width. Detailed analysis of ultrastructure revealed that the fibrils of the major subtype (height 3.61(+/-0.28)nm, width 31.1(+/-2.0)nm) were composed of two ribbons, each of which was composed of two filaments. The molecular volume calculations indicated that a single PrP molecule occupied a distance of approximately 1.2 nm within a single filament. High polymorphism in fibrils generated in vitro is reminiscent of high morphological diversity of scrapie-associated fibrils isolated from scrapie brains, suggesting that polymorphism is peculiar for polymerization of PrP regardless of whether fibrils are formed in vitro or under pathological conditions in vivo.     

Controlling amyloid fibril formation by partial stirring

Many proteins undergoe self‐assembly into fibrillar structures known as amyloid fibrils. During the self‐assembly process, related structures known as spherulites can be formed. Herein we report a facile method where the balance between amyloid fibrils and spherulites can be controlled by stirring of the reaction mixture during the initial stages of the self‐assembly process. Moreover, we report how this methodology can be used to prepare non‐covalently functionalized amyloid fibrils. By stirring the reaction mixture continuously or for a limited time during the lag phase, the fibril length, and hence the propensity to form liquid crystalline phases, can be influenced. This phenomena is utilized in order to prepare films consisting of aligned protein fibrils incorporating the laser dye Nile red. The resulting films display polarized Nile red fluorescence. © 2016 Wiley Periodicals, Inc. Biopolymers 105: 249–259, 2016.     

Nano‐mechanical characterization of disassembling amyloid fibrils using the Peak Force QNM method

The comprehensive understanding of disassembly mechanism of amyloid fibrils requires nano‐scale characterization of the mechanical properties of amyloid fibrils during the disassembly process. In this work, gemini surfactant C₁₂C₆C₁₂Br₂ micelles were used as a probe to disassemble Aβ(1‐40) fibrils. The microstructure evolution and nano‐mechanical properties of Aβ(1‐40) fibrils during the disassembly process were systematically investigated by the Peak Force Quantitative Nano‐mechanical (PF‐QNM) technique. The results show an obvious decrease in Young's modulus of mature fibrils with high β‐sheet contents (2.4 ± 1.0 GPa) in comparison to the resulting peptide/surfactant complexes (1.1 ± 0.8 GPa) with loose surface structures. Interestingly, the Young's modulus of spherical peptide/surfactant complexes on the core was more than 3 GPa. This strategy can be used as a standard protocol to investigate the interaction mechanism between amyloid fibrils and small molecules, which may open up new possibilities to explore the mechanism of relevant human diseases.     

Conformational stability of amyloid fibrils of beta2-microglobulin probed by guanidine-hydrochloride-induced unfolding

Although the stability of globular proteins has been studied extensively, that of amyloid fibrils is scarcely characterized. Beta2-microglobulin (beta2-m) is a major component of the amyloid fibrils observed in patients with dialysis-related amyloidosis. We studied the effects of guanidine hydrochloride on the amyloid fibrils of beta2-m, revealing a cooperative unfolding transition similar to that of the native state. The stability of amyloid fibrils increased on the addition of ammonium sulfate, consistent with a role of hydrophobic interactions. The results indicate that the analysis of unfolding transition is useful to obtain insight into the structural stability of amyloid fibrils.     

RuvbL1 and RuvbL2 enhance aggresome formation and disaggregate amyloid fibrils

The aggresome is an organelle that recruits aggregated proteins for storage and degradation. We performed an siRNA screen for proteins involved in aggresome formation and identified novel mammalian AAA+ protein disaggregases RuvbL1 and RuvbL2. Depletion of RuvbL1 or RuvbL2 suppressed aggresome formation and caused buildup of multiple cytoplasmic aggregates. Similarly, downregulation of RuvbL orthologs in yeast suppressed the formation of an aggresome‐like body and enhanced the aggregate toxicity. In contrast, their overproduction enhanced the resistance to proteotoxic stress independently of chaperone Hsp104. Mammalian RuvbL associated with the aggresome, and the aggresome substrate synphilin‐1 interacted directly with the RuvbL1 barrel‐like structure near the opening of the central channel. Importantly, polypeptides with unfolded structures and amyloid fibrils stimulated the ATPase activity of RuvbL. Finally, disassembly of protein aggregates was promoted by RuvbL. These data indicate that RuvbL complexes serve as chaperones in protein disaggregation.     

Inhibition of transthyretin amyloid fibril formation by 2,4-dinitrophenol through tetramer stabilization

Transthyretin (TTR), a homotetrameric thyroxine transport protein found in the plasma and cerebrospinal fluid, circulates normally as a innocuous soluble protein. In some individuals, TTR polymerizes to form insoluble amyloid fibrils. TTR amyloid fibril formation and deposition have been associated with several diseases like familial amyloid polyneuropathy and senile systemic amyloidosis. Inhibition of the fibril formation is considered a potential strategy for the therapeutic intervention. The effect of small water-soluble, hydrophobic ligand 2,4-dinitrophenol (2,4-DNP) on TTR amyloid formation has been tested. 2,4-DNP binds to TTR both at acidic and physiological pH, as shown by the quenching of TTR intrinsic fluorescence. Interestingly, 2,4-DNP not only binds to TTR at acidic pH but also inhibits amyloid fibril formation as shown by the light scattering and Congo red-binding assay. Inhibition of fibril formation by 2,4-DNP appears to be through the stabilization of TTR tetramer upon binding to the protein, which includes active site. These findings may have implications for the development of mechanism based small molecular weight compounds as therapeutic agents for the prevention/inhibition of the amyloid diseases.     

Chemical modification of insulin in amyloid fibrils

We have investigated the chemical modification of insulin under conditions that promote the conversion of the soluble protein into amyloid fibrils. The modifications that are incorporated into the fibrils include deamidation of Asn A21, Asn B3, and Gln B4. In order to prepare fibrils with minimal deamidation of these residues, the kinetics of aggregation were accelerated by seeding with aliquots of a solution containing preformed fibrils. The resulting fibrils were then reincubated to determine the extent to which chemical modification occurs in the fibril itself. The deamidation of Asn A21 in particular could be followed in detail. Deamidation of this residue in the fibrillar form of insulin was found to occur in only 52 +/- 5% of molecules. This result indicates that there are at least two different packing environments of insulin molecules in the fibrils and suggests that the characterization of chemical modifications may be a useful probe of the environment of polypeptide chains within amyloid fibrils.     

The role of protein sequence and amino acid composition in amyloid formation: scrambling and backward reading of IAPP amyloid fibrils

The specific functional structure of natural proteins is determined by the way in which amino acids are sequentially connected in the polypeptide. The tight sequence/structure relationship governing protein folding does not seem to apply to amyloid fibril formation because many proteins without any sequence relationship have been shown to assemble into very similar β-sheet-enriched structures. Here, we have characterized the aggregation kinetics, seeding ability, morphology, conformation, stability, and toxicity of amyloid fibrils formed by a 20-residue domain of the islet amyloid polypeptide (IAPP), as well as of a backward and scrambled version of this peptide. The three IAPP peptides readily aggregate into ordered, β-sheet-enriched, amyloid-like fibrils. However, the mechanism of formation and the structural and functional properties of aggregates formed from these three peptides are different in such a way that they do not cross-seed each other despite sharing a common amino acid composition. The results confirm that, as for globular proteins, highly specific polypeptide sequential traits govern the assembly pathway, final fine structure, and cytotoxic properties of amyloid conformations.     

The role of protein stability, solubility, and net charge in amyloid fibril formation

Ribonuclease Sa and two charge-reversal variants can be converted into amyloid in vitro by the addition of 2,2,2-triflouroethanol (TFE). We report here amyloid fibril formation for these proteins as a function of pH. The pH at maximal fibril formation correlates with the pH dependence of protein solubility, but not with stability, for these variants. Additionally, we show that the pH at maximal fibril formation for a number of well-characterized proteins is near the pI, where the protein is expected to be the least soluble. This suggests that protein solubility is an important determinant of fibril formation.     

The formation of Escherichia coli curli amyloid fibrils is mediated by prion-like peptide repeats

Amyloid fibril formation is the hallmark of major human maladies including Alzheimer's disease, type II diabetes, and prion diseases. Prion-like phenomena were also observed in yeast. Although not evolutionarily related, one similarity between the animal PrP and the yeast Sup35 prion proteins is the occurrence of short peptide repeats that are assumed to play a key role in the assembly of the amyloid structures. It was recently demonstrated that typical amyloid fibril formation is associated with biofilm formation by Escherichia coli. Here, we note the functional and structural similarity between oligopeptide repeats of the major curli protein and those of animal and yeast prions. We demonstrate that synthetic peptides corresponding to the repeats form fibrillar structures. Furthermore, conjugation of beta-breaker elements to the prion-like repeat significantly inhibits amyloid formation and cell invasion of curli-expressing bacteria. This implies a functional role of the repeat in the self-assembly of the fibrils. Since mammal prion, yeast prion, and curli protein are evolutionarily distinct, the conserved peptide repeats most likely define an optimized self-association motif that was independently evolved by diverse systems.