Regulatory mutations in Sin recombinase support a structure-based model of the synaptosome

The resolvase Sin regulates DNA strand exchange by assembling an elaborate interwound synaptosome containing catalytic and regulatory Sin tetramers, and an architectural DNA-bending protein. The crystal structure of the regulatory tetramer was recently solved, providing new insights into the structural basis for regulation. Here we describe the selection and characterization of two classes of Sin mutations that, respectively, bypass or disrupt the functions of the regulatory tetramer. Activating mutations, which allow the catalytic tetramer to assemble and function independently at site I (the crossover site), were found at ∼20% of residues in the N-terminal domain. The most strongly activating mutation (Q115R) stabilized a catalytically active synaptic tetramer in vitro . The positions of these mutations suggest that they act by destabilizing the conformation of the ground-state site I-bound dimers, or by stabilizing the altered conformation of the active catalytic tetramer. Mutations that block activation by the regulatory tetramer mapped to just two residues, F52 and R54, supporting a functional role for a previously reported crystallographic dimer–dimer interface. We suggest how F52/R54 contacts between regulatory and catalytic subunits might promote assembly of the active catalytic tetramer within the synaptosome.     

Intermediates in serine recombinase-mediated site-specific recombination

Site-specific recombinases are enzymes that promote precise rearrangements of DNA sequences. They do this by cutting and rejoining the DNA strands at specific positions within a pair of target sites recognized and bound by the recombinase. One group of these enzymes, the serine recombinases, initiates strand exchange by making double-strand breaks in the DNA of the two sites, in an intermediate built around a catalytic tetramer of recombinase subunits. However, these catalytic steps are only the culmination of a complex pathway that begins when recombinase subunits recognize and bind to their target sites as dimers. To form the tetramer-containing reaction intermediate, two dimer-bound sites are brought together by protein dimer-dimer interactions. During or after this initial synapsis step, the recombinase subunit and tetramer conformations change dramatically by repositioning of component subdomains, bringing about a transformation of the enzyme from an inactive to an active configuration. In natural serine recombinase systems, these steps are subject to elaborate regulatory mechanisms in order to ensure that cleavage and rejoining of DNA strands only happen when and where they should, but we and others have identified recombinase mutants that have lost dependence on this regulation, thus facilitating the study of the basic steps leading to catalysis. We describe how our studies on activated mutants of two serine recombinases, Tn3 resolvase and Sin, are providing us with insights into the structural changes that occur before catalysis of strand exchange, and how these steps in the reaction pathway are regulated.     

DNA bending in the Sin recombination synapse: functional replacement of HU by IHF

The serine recombinase Sin requires a non-specific DNA-bending protein such as Hbsu for activity at its recombination site resH. Hbsu, and Sin subunits bound at site II of resH, together regulate recombination, ensuring selectivity for directly repeated resH sites by specifying assembly of an intertwined synapse. To investigate the role of the DNA-bending protein in defining the architecture of the synapse, we constructed a chimaeric recombination site (resF) which allows Hbsu to be substituted by IHF, binding specifically between site I (the crossover site) and site II. Two Sin dimers and one IHF dimer can bind together to the closely adjoining sites in resF, forming folded complexes. The precise position of the IHF site within the site I-site II spacer determines the conformation of these complexes, and also the reactivity of the resF sites in recombination assays. The data suggest that a sharp bend with a specific geometry is required in the spacer DNA, to bring the Sin dimers at sites I and II together in the correct relative orientation for synapse assembly and regulation, consistent with our model for a highly condensed synapse in which Hbsu/IHF has a purely architectural function.     

Architecture of a serine recombinase-DNA regulatory complex

An essential feature of many site-specific recombination systems is their ability to regulate the direction and topology of recombination. Resolvases from the serine recombinase family assemble an interwound synaptic complex that harnesses negative supercoiling to drive the forward reaction and promote recombination between properly oriented sites. To better understand the interplay of catalytic and regulatory functions within these synaptic complexes, we have solved the structure of the regulatory site synapse in the Sin resolvase system. It reveals an unexpected synaptic interface between helix-turn-helix DNA-binding domains that is also highlighted in a screen for synapsis mutants. The tetramer defined by this interface provides the foundation for a robust model of the synaptic complex, assembled entirely from available crystal structures, that gives insight into how the catalytic activity of Sin and other serine recombinases may be regulated.     

Expanding the zinc-finger recombinase repertoire: directed evolution and mutational analysis of serine recombinase specificity determinants

The serine recombinases are a diverse family of modular enzymes that promote high-fidelity DNA rearrangements between specific target sites. Replacement of their native DNA-binding domains with custom-designed Cys₂–His₂ zinc-finger proteins results in the creation of engineered zinc-finger recombinases (ZFRs) capable of achieving targeted genetic modifications. The flexibility afforded by zinc-finger domains enables the design of hybrid recombinases that recognize a wide variety of potential target sites; however, this technology remains constrained by the strict recognition specificities imposed by the ZFR catalytic domains. In particular, the ability to fully reprogram serine recombinase catalytic specificity has been impeded by conserved base requirements within each recombinase target site and an incomplete understanding of the factors governing DNA recognition. Here we describe an approach to complement the targeting capacity of ZFRs. Using directed evolution, we isolated mutants of the β and Sin recombinases that specifically recognize target sites previously outside the scope of ZFRs. Additionally, we developed a genetic screen to determine the specific base requirements for site-specific recombination and showed that specificity profiling enables the discovery of unique genomic ZFR substrates. Finally, we conducted an extensive and family-wide mutational analysis of the serine recombinase DNA-binding arm region and uncovered a diverse network of residues that confer target specificity. These results demonstrate that the ZFR repertoire is extensible and highlights the potential of ZFRs as a class of flexible tools for targeted genome engineering.     

Activating mutations of Tn3 resolvase marking interfaces important in recombination catalysis and its regulation

Catalysis of DNA recombination by Tn3 resolvase is conditional on prior formation of a synapse, comprising 12 resolvase subunits and two recombination sites (res). Each res binds a resolvase dimer at site I, where strand exchange takes place, and additional dimers at two adjacent 'accessory' binding sites II and III. 'Hyperactive' resolvase mutants, that catalyse strand exchange at site I without accessory sites, were selected in E. coli. Some single mutants can resolve a res x site I plasmid (that is, with one res and one site I), but two or more activating mutations are necessary for efficient resolution of a site I x site I plasmid. Site I x site I resolution by hyperactive mutants can be further stimulated by mutations at the crystallographic 2-3' interface that abolish activity of wild-type resolvase. Activating mutations may allow regulatory mechanisms of the wild-type system to be bypassed, by stabilizing or destabilizing interfaces within and between subunits in the synapse. The positions and characteristics of the mutations support a mechanism for strand exchange by serine recombinases in which the DNA is on the outside of a recombinase tetramer, and the tertiary/quaternary structure of the tetramer is reconfigured.     

Sin recombinase from Staphylococcus aureus: synaptic complex architecture and transposon targeting

The Sin recombinase from Staphylococcus aureus builds a distinctive DNA-protein synaptic complex to regulate strand exchange. Sin binds at two sites within an 86 basepair (bp) recombination site, resH. We propose that inverted motifs at the crossover site, and tandem motifs at the regulatory site, are recognized by structurally disparate Sin dimers. An essential architectural protein, Hbsu, binds at a discrete central site in resH. Positions of Hbsu-induced DNA deformation coincide with natural targets for Tn552 integration. Remarkably, Sin has the same topological selectivity as Tn3 and gammadelta resolvases. Our model for the recombination synapse has at its core an assembly of four Sin dimers; Hbsu plays an architectural role that is taken by two resolvase dimers in models of the Tn3/gammadelta synapse.     

Catalytic residues of gamma delta resolvase act in cis.

The resolvase protein of the gamma delta transposon is a site-specific recombinase that acts by a concerted break-and-join mechanism. To analyse the role of individual resolvase subunits in DNA strand cleavage, we have directed the binding of catalytic mutants to specific recombination crossover sites or half-sites. Our results demonstrate that the resolvase subunit bound at the half-site proximal to each scissile phosphodiester bond provides the Ser10 nucleophile and Arg8, Arg68 and Arg71 residues essential for cleavage and covalent attachment to the DNA. Several other residues near the presumptive active site are also shown to act in cis. Double-strand cleavage at one crossover site can proceed independently of cleavage at the other site, although interactions between the resolvase dimers bound at the two crossover sites remain essential. An appropriately oriented heterodimer of active and inactive protomers can in most cases mediate either a 'top' or 'bottom' single-strand cleavage, suggesting that there is no obligatory order of strand cleavages. Top-strand cleavage is associated with the topoisomerase I activity of resolvase, suggesting that a functional asymmetry may be imposed on the crossover site by the structure of the active synapse.     

A code governing specific binding of regulatory proteins to DNA and structure of stereospecific sites of regulatory proteins]

A model is proposed for the structure of stereospecific sites in regulatory proteins. On its basis a possible code is suggested that governs the binding of regulatory proteins at specific control sites on DNA. Stereospecific sites of regulatory proteins are assumed to contain pairs of antiparallel polypeptide chain segments which form a right-hand twisted antiparallel beta-sheet, with single-stranded regions at the ends of the beta-structure. The model predicts that binding reaction between a regulatory protein and double-helical DNA is a cooperative phenomenon and is accompanied by significant structural alteration at the stereospecific site of the protein. Half of hydrogen bonds normally existing in beta-structure are broken upon complex formation with DNA and a new set of hydrogen bonds is formed between polypeptide amide groups and DNA base pairs. In a stereospecific site, one chain (t-chain) is attached through hydrogen bonds to the carbonyl oxygens of pyramides and N3 adenines lying in one DNA strand, while the second polypeptide chain (g chain) is hydrogen bonded to the 2-amino groups of guanine residues lying in the opposite DNA strand. The amide groups serve as specific reaction sites being hydrogen bond acceptors in g-chain and hydrogen bond donors in t-chain. The single-stranded portions of t- and g-chains lying in neighbouring subunits of regulatory protein interact with each other forming deformed beta-sheets. The recognition of regulatory sequences by proteins is based on the structural complementarity between stereospecific sites of regulatory proteins and base pairs sequences at the control sites. An essential feature of these sequences is the asymmetrical distribution of guanine residues between the two DNA strands. The code predicts that there are six fundamental amino acid residues (serine, threonine, asparagine, histidine, glutamine and cysteine) whose sequence in stereospecific site determines the base pair sequence to which a given regulatory protein would bind preferentially. The code states a correspondence between four amino acid residues at the stereospecific site of regulatory protein with the two residues being in t- and g-segments, respectively, and AT(GC) base pair at the control site. It is thus possible to determine which amino acid residues in the repressor and which base pairs in the operator DNA are involved in specific interactions with each other, as exemplified by lac repressor binding to lac operator.     

Isocitrate binding at two functionally distinct sites in yeast NAD+-specific isocitrate dehydrogenase

Yeast NAD(+)-specific isocitrate dehydrogenase (IDH) is an octamer containing two types of homologous subunits. Ligand-binding analyses were conducted to examine effects of residue changes in putative catalytic and regulatory isocitrate-binding sites respectively contained in IDH2 and IDH1 subunits. Replacement of homologous serine residues in either subunit site, S98A in IDH2 or S92A in IDH1, was found to reduce by half the total number of holoenzyme isocitrate-binding sites, confirming a correlation between detrimental effects on isocitrate binding and respective kinetic defects in catalysis and allosteric activation by AMP. Replacement of both serine residues eliminates isocitrate binding and measurable catalytic activity. The putative isocitrate-binding sites of IDH1 and IDH2 contain five identical and four nonidentical residues. Reciprocal replacement of the four nonidentical residues in either or both subunits (A108R, F136Y, T241D, and N245D in IDH1 and/or R114A, Y142F, D248T, and D252N in IDH2) was found to be permissive for isocitrate binding. This provides further evidence for two types of binding sites in IDH, although the authentic residues have been shown to be necessary for normal kinetic contributions. Finally, the mutant enzymes with residue replacements in the IDH1 site were found to be unable to bind AMP, suggesting that allosteric activation is dependent both upon binding of isocitrate at the IDH1 site and upon the changes in the enzyme normally elicited by this binding.     

Three subunits contribute amino acids to the active site of tetrameric adenylosuccinate lyase: Lys268 and Glu275 are required

Tetrameric adenylosuccinate lyase (ASL) of Bacillus subtilis catalyzes the cleavage of adenylosuccinate to form AMP and fumarate. We previously reported that two distinct subunits contribute residues to each active site, including the His68 and His89 from one and His141 from a second subunit [Brosius, J. L., and Colman, R. F. (2000) Biochemistry 39, 13336-13343]. Glu(275) is 2.8 A from His141 in the ASL crystal structure, and Lys268 is also in the active site region; Glu275 and Lys268 come from a third, distinct subunit. Using site-directed mutagenesis, we have replaced Lys268 by Arg, Gln, Glu, and Ala, with specific activities of the purified mutant enzymes being 0.055, 0.00069, 0.00028, and 0.0, respectively, compared to 1.56 units/mg for wild-type (WT) enzyme. Glu275 was substituted by Gln, Asp, Ala, and Arg; none of these homogeneous mutant enzymes has detectable activity. Circular dichroism and light scattering reveal that neither the secondary structure nor the oligomeric state of the Lys268 mutant enzymes has been perturbed. Native gel electrophoresis and circular dichroism indicate that the Glu275 mutant enzymes are tetramers, but their conformation is altered slightly. For K268R, the K(m)s for all substrates are similar to WT enzyme. Binding studies using [2-3H]-adenylosuccinate reveal that none of the Glu275 mutant enzymes, nor inactive K268A, can bind substrate. We propose that Lys268 participates in binding substrate and that Glu275 is essential for catalysis because of its interaction with His141. Incubation of H89Q with K268Q or E275Q leads to restoration of up to 16% WT activity, while incubation of H141Q with K268Q or E275Q results in 6% WT activity. These complementation studies provide the first functional evidence that a third subunit contributes residues to each intersubunit active site of ASL. Thus, adenylosuccinate lyase has four active sites per enzyme tetramer, each of which is formed from regions of three subunits.     

Crystal structure of MunI restriction endonuclease in complex with cognate DNA at 1.7 A resolution.

The MunI restriction enzyme recognizes the palindromic hexanucleotide sequence C/AATTG (the '/' indicates the cleavage site). The crystal structure of its active site mutant D83A bound to cognate DNA has been determined at 1.7 A resolution. Base-specific contacts between MunI and DNA occur exclusively in the major groove. While DNA-binding sites of most other restriction enzymes are comprised of discontinuous sequence segments, MunI combines all residues involved in the base-specific contacts within one short stretch (residues R115-R121) located at the N-terminal region of the 3(10)4 helix. The outer CG base pair of the recognition sequence is recognized solely by R115 through hydrogen bonds made by backbone and side chain atoms to both bases. The mechanism of recognition of the central AATT nucleotides by MunI is similar to that of EcoRI, which recognizes the G/AATTC sequence. The local conformation of AATT deviates from the typical B-DNA form and is remarkably similar to EcoRI-DNA. It appears to be essential for specific hydrogen bonding and recognition by MunI and EcoRI.     

Role of arginine-43 and arginine-69 of the Hin recombinase catalytic domain in the binding of Hin to the hix DNA recombination sites

The Hin recombinase mediates the site-specific inversion of a segment of the Salmonella chromosome between two flanking 26 bp hix DNA recombination sites. Mutations in two amino acid residues, R43 and R69 of the catalytic domain of the Hin recombinase, were identified that can compensate for loss of binding resulting from elimination of certain major and minor groove contacts within the hix recombination sites. With one exception, the R43 and R69 mutants were also able to bind a hix sequence with an additional 4 bp added to the centre of the site, unlike wild-type Hin. Purified Hin mutants R43H and R69C had both partial cleavage and inversion activities in vitro while mutants R43L, R43C, R69S, and R69P had no detectable cleavage and inversion activities. These data support a model in which the catalytic domain plays a role in DNA-binding specificity, and suggest that the arginine residues at positions 43 and 69 function to position the Hin recombinase on the DNA for a step in the recombination reaction which occurs either at and/or prior to DNA cleavage.     

Arginine as a General Acid Catalyst in Serine Recombinase-mediated DNA Cleavage

Members of the serine family of site-specific DNA recombinases use an unusual constellation of amino acids to catalyze the formation and resolution of a covalent protein-DNA intermediate. A recent high resolution structure of the catalytic domain of Sin, a particularly well characterized family member, provided a detailed view of the catalytic site. To determine how the enzyme might protonate and stabilize the 3′O leaving group in the strand cleavage reaction, we examined how replacing this oxygen with a sulfur affected the cleavage rate by WT and mutant enzymes. To facilitate direct comparison of the cleavage rates, key experiments used suicide substrates that prevented religation after cleavage. The catalytic defect associated with mutation of one of six highly conserved arginine residues, Arg-69 in Sin, was partially rescued by a 3′ phosphorothiolate substrate. We conclude that Arg-69 has an important role in stabilizing the 3′O leaving group and is the prime candidate for the general acid that protonates the 3′O, in good agreement with the position it occupies in the high resolution structure of the active site of Sin.     

The crystal structure of the catalytic domain of the site-specific recombination enzyme gamma delta resolvase at 2.7 A resolution

The crystal structure of the catalytic domain of the site-specific recombination enzyme gamma delta resolvase has been determined at 2.7 A resolution. Its first 120 amino acids form a central five-stranded, beta-pleated sheet surrounded by five alpha helices. In one of the four dyad-related dimers, the two active site Ser-10 residues are 19 A apart, perhaps close enough to contact and become covalently linked to the DNA at the recombination site. This dimer also forms the only closely packed tetramer found in the crystal. The subunit interface at a second dyad-related dimer is more extensive and more highly conserved among the homologous recombinases; however, its active site Ser-10 residues are more than 30 A apart. Side chains, identified by mutations that eliminate catalysis but not DNA binding, are located on the subunit surface near the active site serine and at the interface between a third dyad-related pair of subunits of the tetramer.     

Structures of dCTP deaminase from Escherichia coli with bound substrate and product: reaction mechanism and determinants of mono- and bifunctionality for a family of enzymes

dCTP deaminase (EC 3.5.4.13) catalyzes the deamination of dCTP forming dUTP that via dUTPase is the main pathway providing substrate for thymidylate synthase in Escherichia coli and Salmonella typhimurium. dCTP deaminase is unique among nucleoside and nucleotide deaminases as it functions without aid from a catalytic metal ion that facilitates preparation of a water molecule for nucleophilic attack on the substrate. Two active site amino acid residues, Arg(115) and Glu(138), were identified by mutational analysis as important for activity in E. coli dCTP deaminase. None of the mutant enzymes R115A, E138A, or E138Q had any detectable activity but circular dichroism spectra for all mutant enzymes were similar to wild type suggesting that the overall structure was not changed. The crystal structures of wild-type E. coli dCTP deaminase and the E138A mutant enzyme have been determined in complex with dUTP and Mg(2+), and the mutant enzyme also with the substrate dCTP and Mg(2+). The enzyme is a third member of the family of the structurally related trimeric dUTPases and the bifunctional dCTP deaminase-dUTPase from Methanocaldococcus jannaschii. However, the C-terminal fold is completely different from dUTPases resulting in an active site built from residues from two of the trimer subunits, and not from three subunits as in dUTPases. The nucleotides are well defined as well as Mg(2+) that is tridentately coordinated to the nucleotide phosphate chains. We suggest a catalytic mechanism for the dCTP deaminase and identify structural differences to dUTPases that prevent hydrolysis of the dCTP triphosphate.     

Probing the mechanism of inactivation of human pyruvate dehydrogenase by phosphorylation of three sites

Activity of the mammalian pyruvate dehydrogenase complex (PDC) is regulated by phosphorylation-dephosphorylation of three serine residues (designated site 1, Ser-264; site 2, Ser-271; site 3, Ser-203) in the alpha subunit of the pyruvate dehydrogenase (E1) component. Substitutions of the phosphorylation sites were generated by site-directed mutagenesis. Glutamate (S1E) and aspartate (S1D) substitutions at site 1 resulted in the complete loss of PDC activity; however, these mutants were variably active in the decarboxylation and 2,6-dichlorophenolindophenol assays. S1Q had only 3% of wild-type PDC activity. The apparent K(m) values for pyruvate increased for the mutants of site 1 when determined in the 2,6-dichlorophenolindophenol assay. The substitutions at sites 2 and 3 caused only moderate reductions in activity in the three assays. S3E had a 27-fold increase in the apparent K(m) for thiamine pyrophosphate and 8-fold increase in the K(i) for pyrophosphate. Site 3 was almost completely protected from phosphorylation by thiamine pyrophosphate. The results show that the size rather than negative charge of the substituted amino acid residue affects the active site of E1 and that modification of each of the three serine residues affect the active site in a site-specific manner for its ability to bind the cofactor and substrates.     

The catalytic residues of Tn3 resolvase

To characterize the residues that participate in the catalysis of DNA cleavage and rejoining by the site-specific recombinase Tn3 resolvase, we mutated conserved polar or charged residues in the catalytic domain of an activated resolvase variant. We analysed the effects of mutations at 14 residues on proficiency in binding to the recombination site (‘site I’), formation of a synaptic complex between two site Is, DNA cleavage and recombination. Mutations of Y6, R8, S10, D36, R68 and R71 resulted in greatly reduced cleavage and recombination activity, suggesting crucial roles of these six residues in catalysis, whereas mutations of the other residues had less dramatic effects. No mutations strongly inhibited binding of resolvase to site I, but several caused conspicuous changes in the yield or stability of the synapse of two site Is observed by non-denaturing gel electrophoresis. The involvement of some residues in both synapsis and catalysis suggests that they contribute to a regulatory mechanism, in which engagement of catalytic residues with the substrate is coupled to correct assembly of the synapse.     

Peptide trapping of the Holliday junction intermediate in Cre-loxP site-specific recombination

Cre recombinase is a prototypical member of the tyrosine recombinase family of site-specific recombinases. Members of this family of enzymes catalyze recombination between specific DNA sequences by cleaving and exchanging one pair of strands between the two substrate sites to form a 4-way Holliday junction (HJ) intermediate and then resolve the HJ intermediate to recombinant products by a second round of strand exchanges. Recently, hexapeptide inhibitors have been described that are capable of blocking the second strand exchange step in the tyrosine recombinase recombination pathway, leading to an accumulation of the HJ intermediate. These peptides are active in the lambda-integrase, Cre recombinase, and Flp recombinase systems and are potentially important tools for both in vitro mechanistic studies and as in vivo probes of cellular function. Here we present biochemical and crystallographic data that support a model where the peptide inhibitor binds in the center of the recombinase-bound DNA junction and interacts with solvent-exposed bases near the junction branch point. Peptide binding induces large conformational changes in the DNA strands of the HJ intermediate, which affect the active site geometries in the recombinase subunits.     

Solution structure and DNA binding of the catalytic domain of the large serine resolvase TnpX

The transfer of antibiotic resistance between bacteria is mediated by mobile genetic elements such as plasmids and transposons. TnpX is a member of the large serine recombinase subgroup of site‐specific recombinases and is responsible for the excision and insertion of mobile genetic elements that encode chloramphenicol resistance in the pathogens Clostridium perfringens and Clostridium difficile. TnpX consists of three structural domains: domain I contains the catalytic site, whereas domains II and III contain DNA‐binding motifs. We have solved the solution structure of residues 1–120 of the catalytic domain I of TnpX. The TnpX catalytic domain shares the same overall fold as other serine recombinases; however, differences are evident in the identity of the proposed hydrogen donor and in the size, amino acid composition, conformation, and dynamics of the TnpX active site loops. To obtain the interaction surface of TnpX_1–120, we titrated a DNA oligonucleotide containing the circular intermediate joint attCI recombination site into ¹⁵N‐labeled TnpX_1–120 and observed progressive nuclear magnetic resonance chemical shift perturbations using ¹⁵N HSQC spectra. Perturbations were largely confined to a region surrounding the catalytic serine and encompassed residues of the active site loops. Utilizing the perturbation map and the data‐driven docking program, HADDOCK, we have generated a model of the DNA interaction complex for the TnpX catalytic domain. Copyright © 2015 John Wiley & Sons, Ltd.