Effect of temperature on lipase-catalyzed esterification in organic solvent

Summary For the esterification of 2-(4-ethylphenoxy)propionic acid catalyzed by lipase MY (Candida rugosa) in isopropyl ether containing a suitable amount of water, the enantioselectivity for the reaction has become higher as the reaction temperature increasing. In contrast, the reverse trend of the temperature effect has been observed for lipase AY (Candida rugosa). A model for these temperature dependence has been proposed.     

Improved stability of the lipase from Candida rugosa in different purification degrees by chemical modification

Summary Semipurified lipase of Candida rugosa and pure isoforms (lipase A and lipase B) have been chemically modified using two methodologies based on polyethyleneglycol (PEG). The activation of PEG with p-NO₂-phenylchloroformate gives better biocatalysts than those obtained with cyanuric chloride-PEG in the enzymatic activity of the lipase. The chemical modification increases the stability of pure lipases in isooctane at 50 °C.     

High yield and optical purity in biocatalysed acylation of trans-2-phenyl-1-cyclohexanol with Candida rugosa lipase in non-conventional media

Candida rugosa lipase (CRL) shows high enantioselectivity toward (1R,2S)-(−)-trans-2-phenyl-1-cyclohexanol enantiomer in acetylation reaction employing vinyl acetate as acyl donor. Attempts to improve reaction yields have pointed out that supercritical CO₂ is the best reaction medium in the studied biocatalytic process. In these conditions an immobilised lipase from Candida rugosa is able to quantitatively resolve racemate with e.e._p 100%.     

Cross-linked enzyme aggregates (CLEAs) with controlled particles: Application to Candida rugosa lipase

Aggregation agent type and concentration, lipase and glutaraldehyde concentration, and pH are able to affect the formation of cross-linked lipase. The carrier-free immobilized Candida rugosa lipase with a particle size of 40–50 μm showed higher activity than that of the lipase with other particle sizes. The carrier-free immobilized C. rugosa lipase can keep 86% original lipase activity (0.018 g g⁻¹ min⁻¹). The enantioselectivity of the carrier-free immobilized lipase (23.3) was about 1.8 times as much as that of the native lipase (13.0) in kinetic resolution of ibuprofen racemic mixture.     

Enantioselective enzymatic hydrolysis of racemic drugs by encapsulation in sol–gel magnetic sporopollenin

Candida rugosa lipase was encapsulated within a sol–gel procedure and improved considerably by fluoride-catalyzed hydrolysis of mixtures of octyltriethoxysilane and tetraethoxysilane in the presence of magnetic sporopollenin. The catalytic properties of the immobilized lipases were evaluated into model reactions, i.e., the hydrolysis of p-nitrophenylpalmitate (p-NPP), and the enantioselective hydrolysis of racemic naproxen methyl ester, mandelic acid methyl ester or 2-phenoxypropionic acid methyl ester that were studied in aqueous buffer solution/isooctane reaction system. The encapsulated magnetic sporopollenin (Spo-M-E) was found to give 319 U/g of support with 342% activity yield. It has been observed that the percent activity yields and enantioselectivity of the magnetic sporopollenin encapsulated lipase were higher than that of the encapsulated lipase without support. The substrate specificity of the encapsulated lipase revealed more efficient hydrolysis of the racemic naproxen methyl ester and 2-phenoxypropionic acid methyl ester than racemic mandelic acid methyl ester. It was observed that excellent enantioselectivity (E > 400) was obtained for encapsulated lipase with magnetic sporopollenin with an ee value of S-Naproxen and R-2 phenoxypropionic acid about 98%.     

Lipase-catalyzed enantioselective esterification of (S)-naproxen hydroxyalkyl ester in organic media

A lipase-catalyzed, enantioselective esterification process in organic solvents was developed for the synthesis of (S)-naproxen hydroxyalkyl ester. With the selection of lipase (Candida rugosa lipase) and reaction medium (isooctane and cyclohexane), a high enantiomeric ratio of <100 for the enzyme was obtained. 1,4-Butanediol was the best acyl acceptor. The carbon chain length of the alcohol had a major effect on the enzyme activity and enantioselectivity of lipase-catalyzed esterification.     

Stabilization of Candida lipase against acetaldehyde by adsorption onto celite

Summary Immobilization of Candida rugosa lipase (Amano AY-30) by adsorption onto Celite 545 led to a markedly improved performance of the enzyme: Firstly, the enzyme was almost completely resistant to deactivation by acetaldehyde, which is liberated as unavoidable by-product in acyl-transfer reactions with vinyl esters, and secondly, the enantioselectivity was enhanced up to three-fold.     

A magnetically separable biocatalyst for resolution of racemic naproxen methyl ester

Candida rugosa lipase (CRL) was encapsulated via the sol–gel method, using 5, 11, 17, 23-tetra-tert-butyl-25,27-bis(2-aminopyridine)carbonylmethoxy-26, 28-dihydroxy-calix[4]arene-grafted magnetic Fe₃O₄ nanoparticles (Calix-M-E). The catalytic activity of encapsulated lipase (Calix-M-E) was tested both in the hydrolysis of p-nitrophenyl palmitate (p-NPP) and the enantioselective hydrolysis of racemic naproxen methyl ester. The present study demonstrated that the calixarene-based compound has the potential to enhance both reaction rate and enantioselectivity of the lipase-catalyzed hydrolysis of racemic naproxen methyl ester. The encapsulated lipase (Calix-M-E) had great catalytic activity and enantioselectivity (E > 400), as well as remarkable reusability as compared to the encapsulated lipase without supports (E = 137) for S-Naproxen.     

Immobilization of Candida rugosa lipase on glass beads for enantioselective hydrolysis of racemic Naproxen methyl ester

Candida rugosa lipase (CRL) was immobilized on glutaraldehyde-activated aminopropyl glass beads by using covalent binding method or sol-gel encapsulation procedure and improved considerably by fluoride-catalyzed hydrolysis of mixtures of RSi(OCH₃)₃ and Si(OCH₃)₄. The catalytic properties of the immobilized lipases were evaluated into model reactions, i.e. the hydrolysis of p-nitrophenylpalmitate (p-NPP). It has been observed that the percent activity yield of the encapsulated lipase was 166.9, which is 5.5 times higher than that of the covalently immobilized lipase. The enantioselective hydrolysis of racemic Naproxen methyl ester by immobilized lipase was studied in aqueous buffer solution/isooctane reaction system and it was noticed that particularly, the glass beads based encapsulated lipases had higher conversion and enantioselectivity compared to covalently immobilized lipase. In short, the study confirms an excellent enantioselectivity (E > 400) for the encapsulated lipase with an ee value of 98% for S-Naproxen.     

Purification and characterization of two isoforms from Candida rugosa lipase B

Two isoforms of Candida rugosalipase B (LB1 and LB2) were purified by anionic exchange chromatography. The lipases had the same N-terminal sequence, carbohydrate content and pH and thermal stability but different pIs and significant differences in their activities against different p-nitrophenol esters and triacylglycerides.     

Synthesis of calix[n]arene-based silica polymers for lipase immobilization

The objective of this study was to prepare new calix[n]arene-based silica polymers for immobilization of Candida rugosa lipase. The amino functionalized calix[4]arene (C4P), calix[6]arene (C6P) and calix[8]arene (C8P)-based silica polymers were used for the covalent attachment of C. rugosa lipase using glutaraldehyde as a coupling agent. The characterization of synthesized CnP polymers and immobilized lipases were made by Fourier transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA) and scanning electron microscope (SEM) techniques. The hydrolytic activities of immobilized lipases (CnP-L) were evaluated and compared with the free enzyme. The activity recovery of immobilized CRL (C. rugosa lipase) based on the carrier C4P, C6P and C8P reaches 74.6%, 68.5% and 51.4%, respectively. The optimal pH and temperature region of the immobilized lipases for the hydrolysis of p-NPP were 7.0 and 50 °C. Nevertheless, the immobilized lipase has good stability, adaptability and reusability in comparison with the free enzyme.     

Enantioselective hydrolysis of rasemic naproxen methyl ester with sol–gel encapsulated lipase in the presence of sporopollenin

Sporopollenin is a natural polymer obtained from Lycopodium clavatum, which is highly stable with constant chemical structure and has high resistant capacity to chemical attack. In this study, the Candida rugosa lipase (CRL) was encapsulated within a chemically inert sol–gel support prepared by polycondensation with tetraethoxysilane (TEOS) and octyltriethoxysilane (OTES) in the presence and absence of sporopollenin and activated sporopollenin as additive. The catalytic properties of the immobilized lipases were evaluated into model reactions, i.e. the hydrolysis of p-nitrophenylpalmitate (p-NPP), and the enantioselective hydrolysis of rasemic Naproxen methyl ester that was studied in aqueous buffer solution/isooctane reaction system. The results indicated that the sporopollenin based encapsulated lipase particularly had higher conversion and enantioselectivity compared to the sol–gel free lipase. In this study, excellent enantioselectivity (E > 400) has been noticed for most lipase preparations (E = 166 for the free enzyme) with an ee value ～98% for S-Naproxen. Moreover, (S)-Naproxen was recovered from the reaction mixture with 98% optical purity.     

Immobilization of lipase from Candida rugosa on Sepabeads(®): the effect of lipase oxidation by periodates

The objective of this paper was the investigation of a suitable Sepabeads^? support and method for immobilization of lipase from Candida rugosa. Three different supports were used, two with amino groups, (Sepabeads^? EC-EA and Sepabeads^? EC-HA), differing in spacer length (two and six carbons, respectively) and one with epoxy group (Sepabeads^? EC-EP). Lipase immobilization was carried out by two conventional methods (via epoxy groups and via glutaraldehyde), and with periodate method for modification of lipase. The results of activity assays showed that lipase retained 94.8% or 87.6% of activity after immobilization via epoxy groups or with periodate method, respectively, while glutaraldehyde method was inferior with only 12.7% of retention. The immobilization of lipase, previously modified by periodate oxidation, via amino groups has proven to be more efficient than direct immobilization of lipase via epoxy groups. In such a way immobilized enzyme exhibited higher activity at high reaction temperatures and higher thermal stability.     

Alcohols as enantioselective inhibitors in a lipase catalysed esterification of a chiral acyl donor

Summary Increased reaction rates and increased enantioselectivities were observed with decreased concentrations of n-alkanols when resolving 2-methyldecanoic acid by esterification catalysed by immobilised lipase from Candida rugosa at controlled water activities in cyclohexane. The enantioselectivity was found to be independent of the water activity in the reaction medium at the n-heptanol concentrations investigated. However, when n-decanol was used as the acyl acceptor, not only the alcohol concentration but also the water activity in the reaction medium, influenced the enantioselectivity. The results obtained showed that the low enantioselectivity seen at a high alcohol concentration could be explained by the alcohol influencing the apparent V _max ^S and V _max ^R differently.     

Enhanced activity of Candida rugosa lipase modified by polyethylene glycol derivatives

The derivatives of polyethylene glycol (PEG) were prepared by reacting PEG with propylene oxide to enhance its hydrophobicity and introduce a branched structure. The PEG derivatives were activated with cyanuric chloride and used to modify the lipase fromCandida rugosa. The maximum specific activity of lipase modified with the PEG derivatives was about 2-fold of that modified with PEG for the esterification of oleic acid and lauryl alcohol in hexane.     

Immobilization of Candida rugosa lipase by cross-linking with glutaraldehyde followed by entrapment in alginate beads

Candida rugosa lipase was immobilized by first cross-linking with glutaraldehyde and then entrapping in calcium alginate beads. The presence of 2-propanol during cross-linking markedly improved the enzyme activity and activity recovery. Maximal enzyme activity (2.1?mmol?h^?1?g^?1 immobilized conjugate, wet weight) and activity recovery (117%) were observed at 30% (v/v) 2-propanol for hydrolysis of olive oil, which were 1.7 and 2.0 times higher than those of the immobilized enzyme prepared in the absence of 2-propanol. The half-life of the immobilized lipase prepared by entrapment after cross-linking in 30% 2-propanol was 1.6 times higher than that prepared by entrapment of the native lipase without cross-linking and 2-propanol pretreatment. The enantioselectivity of the former was 11 times higher than that of the latter for hydrolysis of racemic ketoprofen ethyl ester.     

Effects of Alcohol and Buffer Treatments on the Activity and Enantioselectivity of Candida rugosa Lipase

Abstract

Several treatments were employed on Candida rugosa lipase (CRL) to improve its biocatalytic performance. Besides conventional alcohol treatment conditions, the effects of pH of the buffer solution used in the treatment as well as the changes in stirring, dialysis, and centrifugation steps of the treatment procedure were investigated for the first time for the resolution of racemic naproxen methyl ester. The highest enantioselectivity and conversion in S-naproxen production were achieved by CRL treated with pH 7.5 buffer solution. The elimination of the centrifugation step resulted in an increase in the enantioselectivity, whereas alcohol treatment of CRL was found to be inconvenient for S-naproxen production. Higher activity for p-nitrophenyl acetate was achieved when 20% butanol and pH 4 buffer solution were used, and when dialysis and stirring times were shortened.     

Enantioselective lipase-catalyzed ester hydrolysis: Effects on rates and enantioselectivity from a variation of the ester structure

In order to make a preliminary study of substituent effects on the rate and enantioselectivity obtained in esterolytic reactions catalyzed by a lipase from Candida rugosa, a series of racemic esters, derived from some α-alkyl and α-halo phenylacetic acids, were prepared. The reactions were studied at pH 6.0 and 50°C under which conditions uncatalyzed hydrolysis was relatively slow. Reaction samples were studied at different points of time by means of analytical chiral reversed-phase liquid chromatography, which permitted the simultaneous determination of product enantiomeric excess and of the degree of total ester hydrolysis. These data were then used to calculate initial rates as well as enantioselectivity. An increase of the steric bulk of the α-substituent was found to highly decrease the rate of the reaction. On the other hand, rates were higher for the p-nitrophenyl esters than for the corresponding 2-chloroethyl esters. Consistently, the enantioselectivity was found to be higher for the latter type of ester. The esters of the α-halo (bromo and chloro) phenylacetic acids gave mandelic acid as the final product. This was caused by a rapid solvolysis of the α-halo phenylacetic acid initially formed. © 1993 Wiley-Liss, Inc.     

High-yield synthesis of wax esters catalysed by modified <Emphasis Type="Italic">Candida rugosa</Emphasis> lipase

Candida rugosa lipase (CRL) was applied in a non-solvent esterification reaction to yield twelve wax esters. All products were obtained in nearly 100% yield for 10 h at 50°C when immobilized PEG₂₀₀₀-activated C. rugosa lipase was added to the reaction mixture. The surfactant had also a beneficial effect on the stability of the biocatalytic preparation with 83% of its activity conserved after the seventh run of repeated batch reactions.     

Studies of reaction parameters on synthesis of Citronellyl laurate ester via immobilized Candida rugosa lipase in organic media

Immobilized Candida rugosa lipase was used for the synthesis of citronellyl laurate from citronellol and lauric acid. Screening of different types of support (Amberlite MB-1 and Celite) for immobilization of lipase and solvent (n-hexane, n-heptane, and iso-octane) and optimization of reaction conditions, such as catalyst loading, effect of substrates molar ratio and temperature, have been studied. The maximum enzyme activity was obtained at 310 K. The immobilized C. rugosa lipase onto Amberlite MB-1 support was found to be the best support with a conversion of 89% of citronellyl laurate ester in iso-octane compared to Celite 545. Deactivation of C. rugosa lipase at 313, 318 and 323 K were observed. Ordered bi bi mechanism with dead end complex of lauric acid was found to fit the initial rate data and the kinetic parameters were obtained by non-linear regression analysis.