Quantitative trait loci for organ weights and adipose fat composition in Jersey and Limousin back‐cross cattle finished on pasture or feedlot

A QTL study of live animal and carcass traits in beef cattle was carried out in New Zealand and Australia. Back‐cross calves (385 heifers and 398 steers) were generated, with Jersey and Limousin backgrounds. This paper reports on weights of eight organs (heart, liver, lungs, kidneys, spleen, gastro‐intestinal tract, fat, and rumen contents) and 12 fat composition traits (fatty acid (FA) percentages, saturated and monounsaturated FA subtotals, and fat melting point). The New Zealand cattle were reared and finished on pasture, whilst Australian cattle were reared on grass and finished on grain for at least 180 days. For organ weights and fat composition traits, 10 and 12 significant QTL locations (P < 0.05), respectively, were detected on a genome‐wide basis, in combined‐sire or within‐sire analyses. Seven QTL significant for organ weights were found at the proximal end of chromosome 2. This chromosome carries a variant myostatin allele (F94L), segregating from the Limousin ancestry, and this is a positional candidate for the QTL. Ten significant QTL for fat composition were found on chromosomes 19 and 26. Fatty acid synthase and stearoyl‐CoA desaturase (SCD1), respectively, are positional candidate genes for these QTL. Two FA QTL found to be common to sire groups in both populations were for percentages of C14:0 and C14:1 (relative to all FAs) on chromosome 26, near the SCD1 candidate gene.     

Effects of quantitative trait loci and the myostatin locus on trace and macro elements (minerals) in bovine liver,muscle and kidney

A quantitative trait locus (QTL) study of the concentrations of 14 trace and macro elements (minerals) in tissues of beef cattle was conducted in New Zealand. Back‐cross calves with Jersey and Limousin ancestry (202 heifers and 211 steers) were generated using first‐cross sires. This paper reports on testing for effects of QTL on the concentrations of minerals in liver, kidney and muscle in cattle at slaughter, following a growth phase during which rearing and finishing stages were on pasture. Fifteen QTL were identified (P < 0.05) on a genome‐wide basis in combined‐sire and within‐sire analyses. In addition, the possible effect of the Limousin myostatin F94L allele was tested by fitting each calf's myostatin genotype, and 16 QTL were identified. Twelve were in common with those QTL identified previously, comprising six affecting the liver (copper and zinc, on two chromosomes each; plus iron and molybdenum), three affecting the kidney (calcium, copper and iron), and three affecting muscle (iron, strontium and zinc).     

Quantitative trait loci for live animal and carcass composition traits in Jersey and Limousin back-cross cattle finished on pasture or feedlot

A quantitative trait locus (QTL) study was carried out in two countries, recording live animal and carcass composition traits. Back-cross calves (385 heifers and 398 steers) were generated, with Jersey and Limousin breed backgrounds. The New Zealand cattle were reared on pasture to carcass weights averaging 229 kg, whilst the Australian cattle were reared on grass and finished on grain (for at least 180 days) to carcass weights averaging 335 kg. From 11 live animal traits and 31 carcass composition traits respectively, 5 and 22 QTL were detected in combined-sire analyses, which were significant ( P  <   0.05) on a genome-wise basis. Fourteen significant traits for carcass composition QTL were on chromosome 2 and these were traits associated with muscling and fatness. This chromosome carried a variant myostatin allele (F94L), segregating from the Limousin ancestry. Despite very different cattle management systems between the two countries, the two populations had a large number of QTL in common. Of the 18 traits which were common to both countries, and which had significant QTL at the genome-wise level, eight were significant in both countries.     

Genetic dissection of bull fertility in US Jersey dairy cattle

The service sire has been recognized as an important factor affecting herd fertility in dairy cattle. Recent studies suggest that genetic factors explain part of the difference in fertility among Holstein sires. The main objective of this study was to dissect the genetic architecture of sire fertility in US Jersey cattle. The dataset included 1.5 K Jersey bulls with sire conception rate (SCR) records and 96 K single nucleotide polymorphism (SNP) markers spanning the whole genome. The analysis included whole‐genome scans for both additive and non‐additive effects and subsequent functional enrichment analyses using KEGG Pathway, Gene Ontology (GO) and Medical Subject Headings (MeSH) databases. Ten genomic regions located on eight different chromosomes explained more than 0.5% of the additive genetic variance for SCR. These regions harbor genes, such as PKDREJ, EPB41L2, PDGFD, STX2, SLC25A20 and IP6K1, that are directly implicated in testis development and spermatogenesis, sperm motility and the acrosome reaction. In addition, the genomic scan for non‐additive effects identified two regions on BTA11 and BTA25 with marked recessive effects. These regions harbor three genes—FER1L5, CNNM4 and DNAH3—with known roles in sperm biology. Moreover, the gene‐set analysis revealed terms associated with calcium regulation and signaling, membrane fusion, sperm cell energy metabolism, GTPase activity and MAPK signaling. These gene sets are directly implicated in sperm physiology and male fertility. Overall, this integrative genomic study unravels genetic variants and pathways affecting Jersey bull fertility. These findings may contribute to the development of novel genomic strategies for improving sire fertility in Jersey cattle.     

Mapping of quantitative trait loci for carcass traits in a Japanese Black (Wagyu) cattle population

To detect quantitative trait loci (QTL) that influence economically important traits in a purebred Japanese Black cattle population, we performed a preliminary genome-wide scan using 187 microsatellite markers across a paternal half-sib family composed of 258 offspring. We located six QTL at the 1% chromosome-wise level on bovine chromosomes (BTA) 4, 6, 13, 14 and 21. A second screen of these six QTL regions using 138 additional paternal offspring half-sib from the same sire, provided further support for five QTL: carcass weight on BTA14 (22-39 cM), one for rib thickness on BTA6 (27-58 cM) and three for beef marbling score (BMS) on BTA4 (59-67 cM), BTA6 (68-89 cM) and BTA21 (75-84 cM). The location of QTL for subcutaneous fat thickness on BTA13 was not supported by the second screen (P > 0.05). We determined that the combined contribution of the three QTLs for BMS was 10.1% of the total variance. The combined phenotypic average of these three Q was significantly different (P < 0.001) from those of other allele combinations. Analysis of additional half-sib families will be necessary to confirm these QTL.     

A whole genome scan for QTL affecting milk protein percentage in Italian Holstein cattle, applying selective milk DNA pooling and multiple marker mapping in a daughter design

We report on a complete genome scan for quantitative trait loci (QTL) affecting milk protein percentage (PP) in the Italian Holstein-Friesian cattle population, applying a selective DNA pooling strategy in a daughter design. Ten Holstein-Friesian sires were chosen, and for each sire, about 200 daughters, each from the high and low tails of estimated breeding value for PP, were used to construct milk DNA pools. Sires and pools were genotyped for 181 dinucleotide microsatellites covering all cattle autosomes. Sire marker allele frequencies in the pools were obtained by shadow correction of peak height in the electropherograms. After quality control, pool data from eight sires were used for all subsequent analyses. The QTL heterozygosity estimate was lower than that of similar studies in other cattle populations. Multiple marker mapping identified 19 QTL located on 14 chromosomes (BTA1, 2, 3, 4, 5, 6, 8, 9, 12, 14, 17, 20, 23 and 27). The sires were also genotyped for seven polymorphic sites in six candidate genes (ABCG2, SPP1, casein kappa, DGAT1, GHR and PRLR) located within QTL regions of BTA6, 14 and 20 found in this study. The results confirmed or excluded the involvement of some of the analysed markers as the causative polymorphic sites of the identified QTL. The QTL identified, combined with genotype data of these candidate genes, will help to identify other quantitative trait genes and clarify the complex QTL patterns observed for a few chromosomes. Overall, the results are consistent with the Italian Holstein population having been under long-term selection for high PP.     

Detection of quantitative trait loci for meat quality in a commercial slaughter pig cross

The primary goal of this study was to localize quantitative trait loci (QTL) affecting meat quality traits in swine. In total, 42 traits were scored on 305 F₂ individuals from a commercial slaughter pig cross in Norway. F₁ and F₂ individuals were genotyped for 29 markers on Chromosomes (Chrs) 4, 6, and 7, since previous studies had revealed QTL affecting meat quality traits on these chromosomes. The most evident result was detection of a QTL affecting amount of intramuscular fat on Chr 6. The QTL might also influence tenderness, whereas no effect was observed for back-fat thickness. Additionally, suggestive evidence for QTL affecting other meat quality traits was found on Chr 4 and Chr 7. Received: 16 June 2000 / Accepted: 5 December 2000     

Robust tests for matched case-control genetic association studies

Background

Infectious disease of livestock continues to be a cause of substantial economic loss and has adverse welfare consequences in both the developing and developed world. New solutions to control disease are needed and research focused on the genetic loci determining variation in immune-related traits has the potential to deliver solutions. However, identifying selectable markers and the causal genes involved in disease resistance and vaccine response is not straightforward. The aims of this study were to locate regions of the bovine genome that control the immune response post immunisation. 195 F2 and backcross Holstein Charolais cattle were immunised with a 40-mer peptide derived from foot-and-mouth disease virus (FMDV). T cell and antibody (IgG1 and IgG2) responses were measured at several time points post immunisation. All experimental animals (F0, F1 and F2, n = 982) were genotyped with 165 microsatellite markers for the genome scan.

Results

Considerable variability in the immune responses across time was observed and sire, dam and age had significant effects on responses at specific time points. There were significant correlations within traits across time, and between IgG1 and IgG2 traits, also some weak correlations were detected between T cell and IgG2 responses. The whole genome scan detected 77 quantitative trait loci (QTL), on 22 chromosomes, including clusters of QTL on BTA 4, 5, 6, 20, 23 and 25. Two QTL reached 5% genome wide significance (on BTA 6 and 24) and one on BTA 20 reached 1% genome wide significance.

Conclusions

A proportion of the variance in the T cell and antibody response post immunisation with an FDMV peptide has a genetic component. Even though the antigen was relatively simple, the humoral and cell mediated responses were clearly under complex genetic control, with the majority of QTL located outside the MHC locus. The results suggest that there may be specific genes or loci that impact on variation in both the primary and secondary immune responses, whereas other loci may be specifically important for early or later phases of the immune response. Future fine mapping of the QTL clusters identified has the potential to reveal the causal variations underlying the variation in immune response observed.     

Sire breed comparisons for meat and eating quality traits in Australian pig populations

Sire breed comparisons for carcase (n = 1169), meat and eating quality (n = 686) traits were obtained using data recorded on progeny of known pedigree sired by Duroc (DU), Large White (LW), Landrace (LR) and Duroc Synthetic (DS) boars from crossbred (LW/LR) sows. Animals were reared in eco-shelters in large single-sex contemporary groups and slaughtered on an age constant basis at 22 weeks of age. Compared to progeny from other sire groups, animals sired by purebred Duroc boars tended to have improved eating quality traits (higher intramuscular fat and lower shear force) at the expense of poorer carcase characteristics (higher subcutaneous and belly fat). Animals sired by DS boars tended to be heavier and leaner than those sired by LW, LR or DU boars; intramuscular fat but not belly fat was correspondingly lower, while tenderness was generally consistent with that of the DU progeny. Significant variability of sire progeny groups within sire breed suggests that sire breed selection, potentially used for improving traits such as meat quality in commercial progeny, will be less accurate in the absence of sire-specific information, which is typically poorly recorded in this class of traits.     

Genome wide QTL mapping to identify candidate genes for carcass traits in Hanwoo (Korean Cattle)

Meat quality traits are the most economically important traits affecting the beef industry in Korea. We performed a whole genome quantitative trait locus (QTL) mapping study of carcass data in Hanwoo Korean cattle. Two hundred sixty-six Hanwoo steers from 65 sires were genotyped using a 10K Affymetrix SNP chip. The average SNP interval across the bovine genome was 1.5Mb. Associations between each individual SNP and four carcass traits [carcass weight (CWT), eye muscle area (EMA), back fat thickness (BFT), and marbling (MAR)] were assessed using a linear mixed model of each trait. Combined linkage and linkage disequilibrium analysis (LDLA) detected six potential QTL on BTA04, 06, 13, 16, 17, and 23 at the chromosome-wise level (P<0.05). Two MAR QTL were detected at 52.2 cM of BTA06 and 46.04 cM of BTA17. We identified three genes (ARAP2, LOC539460, and LOC511424) in the QTL region of BTA06 and seven genes (RPS14, SCARB1, LOC782103, BRI3BP, AACS, DHX37, and UBC) in the QTL region of BTA17. One significant QTL for CWT was detected at 100 cM on BTA04 and the corresponding QTL region spanned 1.7 cM from 99.7 to 101.4 cM. For EMA QTL, one significant QTL was detected at 3.9 cM of BTA23 and the most likely QTL interval was 1.4 cM, placing 15 candidate genes in the marker bracket. Finally, two QTL for BFT were identified at 68 cM on BTA13 and 24 cM on BTA16. The LPIN3 gene, which is functionally associated with lipodystrophy in humans, is located in the BFT QTL on BTA13. Thus, two potential candidate genes, acetoacetyl-CoA synthetase (AACS) and lipin (LPIN), were detected in QTL regions on BTA17 for MAR and BTA13 for BFT, respectively. In conclusion, LDLA analysis can be used to detect chromosome regions harboring QTL and candidate genes with a low density SNP panel, yielding relatively narrow confidence intervals regarding location.     

Whole‐genome association study for energy balance and fat/protein ratio in German Holstein bull dams

The metabolic status of cows is important to health and fertility, especially in early lactation, and energy balance (EB) and fat/protein ratio (FPR) are considered as appropriate indicators for metabolic disorders. The aim of this study was to detect SNPs (single nucleotide polymorphisms) associated with EB and FPR in German Holstein bull dams belonging to the research herd Karkendamm. Bull dams were genotyped using the Illumina Bovine SNP 50K Bead chip^® comprising 54 001 SNPs. A total of 43 593 SNPs and 586 (EB) and 668 (FPR) bull dams passed the quality control criteria. Phenotypes were deregressed breeding values estimated via random regression animal models for lactation days 11, 20, 30, and 42 for EB and FPR. Whole‐genome association analyses were carried out fitting principal components as covariates to adjust for genetic substructure. Permutation tests were applied to estimate genome‐wise significance. Across all observed lactation days, 19 SNPs located in four different intervals on chromosomes 1, 14, 16, and 27 were detected. For EB, seven markers across four chromosomes were identified. There was no overlap between markers associated with FPR and EB. SNPs associated with FPR were mostly located in QTL regions for milk production traits, especially in the region of DGAT1, whereas SNPs associated with EB mainly showed positional relationships to previously described QTL regions affecting functional traits, especially fertility.     

Genome‐wide association study uncovers four QTL predisposing to supernumerary teats in cattle

Supernumerary teats (hyperthelia, SNTs) are a common abnormality of the bovine udder with a medium to high heritability and a postulated oligogenic or polygenic inheritance pattern. SNTs not only negatively affect machine milking ability but also act as a reservoir for bacteria. A genome‐wide association study was carried out to identify genes involved in the development of SNTs in the dual‐purpose Fleckvieh breed. A total of 2467 progeny‐tested bulls were genotyped at 43 698 single nucleotide polymorphisms, and daughter yield deviations (DYDs) for ‘udder clearness' (UC) were used as high‐heritability phenotypes. Massive structuring of the study population was accounted for by principal components analysis‐based and mixed model‐based approaches. Four loci on BTA5, BTA6, BTA11 and BTA17 were significantly associated with the UC DYD. Three associated regions contain genes of the highly conserved Wnt signalling pathway. The four QTL together account for 10.7% of the variance of the UC DYD, whereas the major fraction of the DYD variance is attributable to chromosomes with no identified QTL. Our results support both an oligogenic and a polygenic inheritance pattern of SNTs in cattle. The identified candidate genes permit insights into the genetic architecture of teat malformations in cattle and provide clues to unravel the molecular mechanisms of mammary gland alterations in cattle and other species.     

Quantitative trait loci mapping for conjugated linoleic acid,vaccenic acid and ∆9‐desaturase in Italian Brown Swiss dairy cattle using selective DNA pooling

A selective DNA pooling approach was applied to identify QTL for conjugated linoleic acid (CLA), vaccenic acid (VA) and Δ⁹‐desaturase (D9D) milk content in Italian Brown Swiss dairy cattle. Milk samples from 60 animals with higher values (after correction for environmental factors) and 60 animals with lower values for each of these traits from each of five half‐sib families were pooled separately. The pools were genotyped using the Illumina BovineSNP50 BeadChip. Sire allele frequencies were compared between high and low tails at the sire and marker level for SNPs for which the sires were heterozygous. An r procedure was implemented to perform data analysis in a selective DNA pooling design. A correction for multiple tests was applied using the proportion of false positives among all test results. BTA 19 showed the largest number of markers in association with CLA. Associations between SNPs and the VA and Δ⁹‐desaturase traits were found on several chromosomes. A bioinformatics survey identified genes with an important role in pathways for milk fat and fatty acids metabolism within 1 Mb of SNP markers associated with fatty acids contents.     

Quantitative trait loci analysis of a Duroc commercial population highlights differences in the genetic determination of meat quality traits at two different muscles

We performed a whole‐genome scan with 110 informative microsatellites in a commercial Duroc population for which growth, fatness, carcass and meat quality phenotypes were available. Importantly, meat quality traits were recorded in two different muscles, that is, gluteus medius (GM) and longissimus thoracis et lumborum (LTL), to find out whether these traits are determined by muscle‐specific genetic factors. At the whole‐population level, three genome‐wide QTL were identified for carcass weight (SSC7, 60 cM), meat redness (SSC13, 84 cM) and yellowness (SSC15, 108 cM). Within‐family analyses allowed us to detect genome‐wide significant QTL for muscle loin depth between the 3rd and 4th ribs (SSC15, 54 cM), backfat thickness (BFT) in vivo (SSC10, 58 cM), ham weight (SSC9, 69 cM), carcass weight (SSC7, 60 cM; SSC9, 68 cM), BFT on the last rib (SSC11, 48 cM) and GM redness (SSC8, 85 cM; SSC13, 84 cM). Interestingly, there was low positional concordance between meat quality QTL maps obtained for GM and LTL. As a matter of fact, the three genome‐wide significant QTL for colour traits (SSC8, SSC13 and SSC15) that we detected in our study were all GM specific. This result suggests that QTL effects might be modulated to a certain extent by genetic and environmental factors linked to muscle function and anatomical location.     

Genome‐wide association analysis for growth,muscularity and meat quality in Piétrain pigs

Improvement in growth and meat quality is one of the main objectives in sire line pig breeding programmes. Mapping quantitative trait loci for these traits using experimental crosses and a linkage‐based approach has been performed frequently in the past. The Piétrain breed often was involved as a founder breed to establish the experimental crosses. This breed was selected for muscularity and leanness but shows relatively poor meat quality. It is frequently used as a sire line breed. With the advent of genome‐wide and dense SNP chips in pig genomic research, it is possible to also conduct genome‐wide association studies within the Piétrain breed. In this study, around 500 progeny‐tested sires were genotyped with 60k SNPs. Data filtering showed that around 48k SNPs were useable in this sample. These SNPs were used to conduct a genome‐wide association study for growth, muscularity and meat quality traits. Because it is known that a mutation in the RYR1 gene located on chromosome 6 shows a major effect on meat quality, this mutation was included in the models. Single‐marker and multimarker association analyses were performed. The results revealed between zero and eight significant associations per trait with P < 5 × 10^?5. Of special interest are SNPs located on SSC6, SSC10 and SSC15.     

Genome-wide identification of quantitative trait loci for carcass composition and meat quality in a large-scale White Duroc × Chinese Erhualian resource population

Carcass and meat quality traits are economically important in pigs. In this study, 17 carcass composition traits and 23 meat quality traits were recorded in 1028 F₂ animals from a White Duroc × Erhualian resource population. All pigs in this experimental population were genotyped for 194 informative markers covering the entire porcine genome. Seventy-seven genome-wide significant quantitative trait loci (QTL) for carcass traits and 68 for meat quality were mapped to 34 genomic regions. These results not only confirmed many previously reported QTL but also revealed novel regions associated with the measured traits. For carcass traits, the most prominent QTL was identified for carcass length and head weight at 57 cM on SSC7, which explained up to 50% of the phenotypic variance and had a 95% confidence interval of only 3 cM. Moreover, QTL for kidney and spleen weight and lengths of cervical vertebrae were reported for the first time in pigs. For meat quality traits, two significant QTL on SSC5 and X were identified for both intramuscular fat content and marbling score in the longissimus muscle, while three significant QTL on SSC1 and SSC9 were found exclusively for IMF. Both LM and the semimembranous muscle showed common QTL for colour score on SSC4, 5, 7, 8, 13 and X and discordant QTL on other chromosomes. White Duroc alleles at a majority of QTL detected were favourable for carcass composition, while favourable QTL alleles for meat quality originated from both White Duroc and Erhualian.     

Detecting QTL for feed intake traits and other performance traits in growing pigs in a Piétrain-Large White backcross

Knowing the large difference in daily feed intake (DFI) between Large White (LW) and Piétrain (PI) growing pigs, a backcross (BC) population has been set up to map QTL that could be used in marker assisted selection strategies. LW × PI boars were mated with sows from two LW lines to produce 16 sire families. A total of 717 BC progeny were fed ad libitum from 30 to 108 kg BW using single-place electronic feeders. A genome scan was conducted using genotypes for the halothane gene and 118 microsatellite markers spread on the 18 porcine autosomes. Interval mapping analyses were carried out, assuming different QTL alleles between sire families to account for within breed variability using the QTLMap software. The effects of the halothane genotype and of the dam line on the QTL effect estimates were tested. One QTL for DFI (P < 0.05 at the chromosome-wide (CW) level) and one QTL for feed conversion ratio (P < 0.01 at the CW level) were mapped to chromosomes SSC6 - probably due to the halothane alleles - and SSC7, respectively. Three putative QTL for feed intake traits were detected (P < 0.06 at the CW level) on SSC2, SSC7 and SSC9. QTL on feeding traits had effects in the range of 0.20 phenotypic s.d. The relatively low number of QTL detected for these traits suggests a large QTL allele variability within breeds and/or low effects of individual loci. Significant QTL were detected for traits related to carcass composition on chromosomes SSC6, SSC15 and SSC17, and to meat quality on chromosome SSC6 (P < 0.01 at the genome-wide level). QTL effects for body composition on SSC13 and SSC17 differed according to the LW dam line, which confirmed that QTL alleles were segregating in the LW breed. An epistatic effect involving the halothane locus and a QTL for loin weight on SSC7 was identified, the estimated substitution effects for the QTL differing by 200 g between Nn and NN individuals. The interactions between QTL alleles and genetic background or particular genes suggest further work to validate QTL segregations in the populations where marker assisted selection for the QTL would be applied.     

Increasing the accuracy of genomic prediction in pure‐bred Limousin beef cattle by including cross‐bred Limousin data and accounting for an F94L variant in MSTN

Explicitly fitting effects for major genes or QTL that account for a large percentage of variation in a whole genomic prediction model may increase prediction accuracy. This study compared approaches to account for a major effect of an F94L variant in the MSTN gene within the genomic prediction using bovine whole‐genomic SNP markers. Among the beef cattle breeds, Limousin have been known to have an F94L variant that is not present in Angus. The reference population in this study consisted of 3060 beef cattle including pure‐bred Limousin (PL), cross‐bred Limousin with Angus (LF) and pure‐bred Angus, genotyped using a BovineSNP50 BeadChip and directly for the MSTN‐F94L variant. We compared prediction accuracies in PL animals using the three datasets from only the PL population, admixed PL and LF (AL) or multibreed analysis using all of the PL, LF and Angus (MB) population according to four‐fold cross‐validation after K‐means clustering. The MSTN‐F94L variant was the most strongly associated with five traits (birth weight, calving ease direct, milk, weaning weight and yield grade) among the 13 measured traits in PL and AL populations. Fitting the MSTN‐F94L variant as a random effect, the genomic prediction accuracies for birth weight increased by 2.7% in PL, by 2.2% in AL and by 3.2% in MB. Prediction accuracies for five traits increased in the MB analysis. Fitting MSTN‐F94L as a fixed effect in PL, AL and MB analyses resulted in increased prediction accuracy in PL for eight traits. Prediction accuracies can be improved by including a causal variant in genomic evaluation compared with simply using whole‐genome SNP markers. Fitting the causal variant as a fixed effect along with markers fitted as random effects resulted in greater prediction accuracies for most traits. Causal variants should be genotyped along with SNP markers.