Biosorption of Cadmium by Live and Dead <Emphasis Type="Italic">Spirulina</Emphasis>: IR Spectroscopic,Kinetics, and SEM Studies

Cadmium is an important environmental pollutant and a potent toxicant to bacteria, algae, and fungi. Mechanisms of Cd⁺² toxicity and resistance are variable, depending on the organism. The present work reports the use of live and dead Spirulina sp. for sorption of Cd⁺². This investigation shows that this biomass takes up substantial amount of Cd⁺² ions. IR spectroscopic study, kinetics models, Langmuir & Freundlich adsorption isotherms, scanning electron microscopic analysis of Spirulina sp., and the Spirulina sp. treated with different metal ions have been employed to understand the sorption mechanism. Infrared spectra of live Spirulina treated with Cd⁺² ions for different lengths of time have been taken to understand the time dependency of metal interaction.     

Synthesis of a chitosan-linked calix[4]arene chelating polymer and its sorption ability toward heavy metals and dichromate anions

This communication describes preparation, characterization, and the evaluation of sorption properties of a calix[4]arene-based chitosan polymer (C[4]BCP). C[4]BCP was used to sorption studies of some heavy metal cations (Co(2+), Ni(2+), Cu(2+), Cd(2+)(,) Hg(2+) and Pb(2+)) and dichromate anions (Cr(2)O(7)(2-)/HCr(2)O(7)(-)) as sorbent material. Also the supporting material (chitosan) was used for comparison in these experiments. The results for heavy metal cations showed that C[4]BCP was excellent sorbent and the effect of chitosan was low. In the sorption studies of dichromate anions, C[4]BCP was highly effective sorbent at pH 1.5.     

The metallomics approach: use of Fe(II) and Cu(II) footprinting to examine metal binding sites on serum albumins

Metal binding to serum albumins is examined by oxidative protein-cleavage chemistry, and relative affinities of multiple metal ions to particular sites on these proteins were identified using a fast and reliable chemical footprinting approach. Fe(ii) and Cu(ii), for example, mediate protein cleavage at their respective binding sites on serum albumins, in the presence of hydrogen peroxide and ascorbate. This metal-mediated protein-cleavge reaction is used to evaluate the binding of metal ions, Na(+), Mg(2+), Ca(2+), Al(3+), Cr(3+), Mn(2+), Co(2+), Ni(2+), Zn(2+), Cd(2+), Hg(2+), Pb(2+), and Ce(3+) to albumins, and the relative affinities (selectivities) of the metal ions are rapidly evaluated by examining the extent of inhibition of protein cleavage. Four distinct systems Fe(II)/BSA, Cu(II)/BSA, Fe(II)/HSA and Cu(II)/HSA are examined using the above strategy. This metallomics approach is novel, even though the cleavage of serum albumins by Fe(II)/Cu(II) has been reported previously by this laboratory and many others. The protein cleavage products were analyzed by SDS PAGE, and the intensities of the product bands quantified to evaluate the extent of inhibition of the cleavage and thereby evaluate the relative binding affinities of specific metal ions to particular sites on albumins. The data show that Co(II) and Cr(III) showed the highest degree of inhibition, across the table, followed by Mn(II) and Ce(III). Alakali metal ions and alkaline earth metal ions showed very poor affinity for these metal sites on albumins. Thus, metal binding profiles for particular sites on proteins can be obtained quickly and accurately, using the metallomics approach.     

The removal by crab shell of mixed heavy metal ions in aqueous solution

In order to examine the inhibition effect of other heavy metal ions on the removal by crab shell of heavy metal ions in aqueous solutions, three ions (Pb(2+), Cd(2+), Cr(3+)) were used in single, binary and ternary systems. In single heavy metal ion systems, the removals of Cr(3+) and Pb(2+) were much higher than that of Cd(2+). In binary heavy metal ions systems, Cd(2+) did not affect Pb(2+) removal while Cr(3+) had a severe inhibition effect on the removal of Pb(2+). Cd(2+) removal was slightly affected by the presence of Pb(2+); however, it was severely affected by the presence of Cr(3+). The inhibitory effect of Cd(2+) on Cr(3+) was relatively lower than that of Pb(2+).     

Study of cadmium, zinc and lead biosorption by orange wastes using the subsequent addition method

The biosorption of several metals (Cd(2+), Zn(2+) and Pb(2+)) by orange wastes has been investigated in binary systems. Multicomponent sorption isotherms were obtained using an original procedure, similar to that proposed by Pagnanelli et al. [Pagnanelli, F., Petrangeli, M.P., Toro, L., Trifoni, M., Veglio, F., 2001a. Biosorption of metal ions on Arthrobacter sp.: biomass characterization and biosorption modelling. Environ. Sci. Technol. 34, 2773-2778] for monoelement systems, known as subsequent addition method (SAM). Experimental sorption data were analysed using an extended multicomponent Langmuir equation. The maximum sorption uptake was approximately 0.25mmol/g for the three binary systems studied. The reliability of the proposed procedure for obtaining the equilibrium data in binary systems was verified by means of a statistical F-test.     

Anti Zn antibodies: cross reactivity and competitive binding with heavy metals

Monoclonal antibodies of IgM class, specific to IDA-Zn were used for evaluating their Zn(2+) binding efficiency in the presence of trace metal ions such as Cr(3+) Cr(6+), Cu(2+) and Cd(2+). In the present work, antibody raised against the hapten IDA-Zn(II) was pre-incubated with different metal ions and the binding capacity to the specific hapten was tested using ELISA and immobilized metal ion affinity chromatography (IMAC) techniques. IMAC was carried out with the free antibody and antibody pre-incubated with selected heavy metal ions using Sepharose IDA-Zn(2+) column and the same samples were tested using a hapten specific ELISA with non-protein hapten carrier. Different effects were observed after pre-incubation with metal ions. Cr(3+) exhibited synergistic binding where as antagonism was detected with Cd(2+). The synergistic effect observed with Cr(3+) suggests involvement of binding sites other than that of zinc and conformational changes that result from Cr(3+) binding. It is probable that, this binding event also increases the accessibility of the zinc binding sites on IgM. On the same lines, the antagonism observed with Cd(2+) could be attributed to structural changes resulting in reduced accessibility to zinc binding sites. In case of Cr(6+), no appreciable change in binding to IDA-Zn was observed while Cu(2+) showed competitive binding.     

Removal of chromium by mucilaginous seeds of Ocimum basilicum

Polysaccharides bound to bacteria or in isolated form have been shown to bind heavy metals. A limitation of this technology can be overcome by immobilization. In view of this Ocimum basilicum seeds which swell upon wetting could serve as natural immobilized source of agriculturally-based polysaccharides. The seeds consist of an inner hard core and a pectinous fibrillar outer layer. Pretreating the seeds with acid, alkali, periodate or boiling in water was found to alter the metal binding capacity. Of the various treatments given, seeds boiled in water were found to be superior in terms of mechanical stability and exhibited fairly optimal Cr(VI) uptake kinetics. The maximum adsorption capacity as calculated from the Langmuir isotherm was 205 mg Cr/g dry seeds. Biosorption of Cr(VI) was found to be pH dependent with maximum uptake at pH 1.5 wherein sorption was not affected by the presence of other metal ions such as Cd(2+), Cu(2+), Ca(2+) and Na(+). Seeds were used in a packed bed reactor for the continuous removal of Cr(VI). Thus O. basilicum seeds may have application as a potential bioresource in tropical countries such as India where they are widely available.     

Cyanobacteria as a biosorbent for mercuric ion

The biosorption of Hg(2+) by two strains of cyanobacteria, Spirulina platensis and Aphanothece flocculosa, was studied under a batch stirred reaction system. Essential process parameters, including pH, biomass concentration, initial metal concentration, and presence of co-ions were shown to influence the Hg(2+) uptake. Hg(2+) uptake was optimal at pH 6.0 for both strains. The maximum loading capacities per gram of dry biomass were found to be 456 mg Hg(2+) for A. flocculosa and 428 mg Hg(2+) for S. platensis. At an initial concentration of 10 ppm Hg(2+), A. flocculosa was able to remove more than 98% of the mercury ion from solution. The biosorption kinetics of both strains showed that the metal uptake is bi-phasic, exhibiting a rapid initial uptake followed by a slower absorption process. The presence of dissolved Co(2+), Ni(2+), and Fe(3+) were found to play a synergistic role for Hg(2+) uptake by both strains. Regeneration of the biomass was examined by treating Hg(2+)-loaded samples with HCl and NH(4)Cl over four cycles of sorption and desorption.     

Metal ions may suppress or enhance cellular differentiation in Candida albicans and Candida tropicalis biofilms

Candida albicans and Candida tropicalis are polymorphic fungi that develop antimicrobial-resistant biofilm communities that are characterized by multiple cell morphotypes. This study investigated cell type interconversion and drug and metal resistance as well as community organization in biofilms of these microorganisms that were exposed to metal ions. To study this, Candida biofilms were grown either in microtiter plates containing gradient arrays of metal ions or in the Calgary Biofilm Device for high-throughput susceptibility testing. Biofilm formation and antifungal resistance were evaluated by viable cell counts, tetrazolium salt reduction, light microscopy, and confocal laser scanning microscopy in conjunction with three-dimensional visualization. We discovered that subinhibitory concentrations of certain metal ions (CrO(4)(2-), Co(2+), Cu(2+), Ag(+), Zn(2+), Cd(2+), Hg(2+), Pb(2+), AsO(2)(-), and SeO(3)(2-)) caused changes in biofilm structure by blocking or eliciting the transition between yeast and hyphal cell types. Four distinct biofilm community structure types were discerned from these data, which were designated "domed," "layer cake," "flat," and "mycelial." This study suggests that Candida biofilm populations may respond to metal ions to form cell-cell and solid-surface-attached assemblages with distinct patterns of cellular differentiation.     

Fluorescence study of the interaction of Suwannee River fulvic acid with metal ions and Al3+-metal ion competition

In this study emission and synchronous-scan fluorescence spectroscopy have been used to investigate the interaction of the class A (oxygen seeking 'hard acid') metal Al(3+), with Suwannee River fulvic acid (SRFA), as well as competition between Al(3+) and several other metal ions (Ca(2+), Mg(2+), Cu(2+), Pd(2+), La(3+), Tb(3+) and Fe(3+)) for binding sites on SRFA. Of the four metal ions possessing very similar (and relatively low) ionic indices (Ca(2+), Mg(2+), Cu(2+) and Pd(2+)) only the latter two paramagnetic ions significantly quenched SRFA fluorescence emission intensity. Of the four metal ions possessing very similar (and relatively low) covalent indices (Ca(2+), Mg(2+), La(3+) and Tb(3+)) only the last paramagnetic ion (Tb(3+)) significantly quenched SRFA fluorescence. None of these metals was able to significantly compete with SRFA-bound Al(3+).Fe(3+), which differs substantially from all of the other metals examined in this study in that it possesses a relatively high ionic index (but not as high as Al(3+)) and a relatively low covalent index (but not as low as Al(3+)), was able not only to quench SRFA fluorescence but also to compete (at least to some extent) with SRFA-bound Al(3+). Synchronous-scan fluorescence SRFA spectra taken in the absence and presence of Fe(3+) and/or Al(3+) support the view that these two metal ions can compete for sites on SRFA. The results of these fluorescence experiments further confirm the Al(3+), and metal ions that have electronic properties somewhat similar to Al(3+) (such as Fe(3+)) are somewhat unique in their ability to interact strongly with binding sites on fulvic acids.     

Liquid crystalline phase behavior of high molecular weight DNA: a comparative study of the influence of metal ions of different size, charge and binding mode

The ability of Li(+), Na(+), K(+), Rb(+), Cs(+), Mg(2+), Ca(2+), Sr(2+), Ba(2+), Cu(2+), Cd(2+), Al(3+), V(4+), Hg(2+), Pd(2+), Au(3+), and Pt(4+) to provoke liquid crystalline (LC) phases in high molecular weight DNA was investigated. The alkali and alkaline earth metal ions provoked typical cholesteric/columnar structures, whereas transition metal ions precipitated DNA into solid/translucent gel-like aggregates. Heavy metal ions reduced viscosity of DNA solution, disrupting rigid, rod-like DNA structure necessary for LC textures. Three-layer quantum mechanical-molecular mechanical (QM/MM) studies of Li(+), Na(+), K(+), Mg(2+), and Ca(2+) binding DNA fragment suggested several possible binding modes of these ions to the phosphate groups. The dianion mode of metal binding, involving the phosphate groups of both strands of DNA, allowed for higher DNA binding affinity of the alkaline earth metal ions. These results have implications in understanding the biological role of metal ions and developing DNA-based sensors and nanoelectronic devices.     

Co2+, Cu2+, and Zn2+ accumulation by cyanobacterium Spirulina platensis

The Spirulina platensis biomass was characterized for its metal accumulation as a function of pH, external metal concentration, equilibrium isotherms, kinetics, effect of co-ions under free (living cells, lyophilized, and oven-dried) and immobilized (Ca-alginate and polyacrylamide gel) conditions. The maximum metal biosorption by S. platensis biomass was observed at pH 6.0 with free and immobilized biomass. The studies on equilibrium isotherm experiments showed highest maximum metal loading by living cells (181.0 +/- 13.1 mg Co(2+)/g, 272.1 +/- 29.4 mg Cu(2+)/g and 250.3 +/- 26.4 mg Zn(2+)/g) followed by lyophilized (79.7 +/- 9.6 mg Co(2+)/g, 250.0 +/- 22.4 mg Cu(2+)/g and 111.2 +/- 9.8 mg Zn(2+)/g) and oven-dried (25.9 +/- 1.9 mg Co(2+)/g, 160.0 +/- 14.2 mg Cu(2+)/g and 35.1 +/- 2.7 mg Zn(2+)/g) biomass of S. platensis on a dry weight basis. The polyacrylamide gel (PAG) immobilization of lyophilized biomass found to be superior over Ca-alginate (Ca-Alg) and did not interfere with the S. platensis biomass biosorption capacity, yielding 25% of metal loading after PAG entrapment. The time-dependent metal biosorption in both the free and immobilized form revealed existence of two phases involving an initial rapid phase (which lasted for 1-2 min) contributing 63-77% of total biosorption, followed by a slower phase that continued for 2 h. The metal elution studies conducted using various reagents showed more than 90% elution with mineral acids, calcium salts, and Na(2)EDTA with free (lyophilized or oven-dried) as well as immobilized biomass. The experiments conducted to examine the suitability of PAG-immobilized S. platensis biomass over multiple cycles of Co(2+), Cu(2+), and Zn(2+) sorption and elution showed that the same PAG cubes can be reused for at least seven cycles with high efficiency.     

Picogram detection of metal ions by melanin-sensitized piezoelectric sensor

A heavy metal ion sensor was constructed by cross-linking melanin onto the gold electrode of quartz crystal microbalance (QCM). A mercury ion sensitivity of 518+/-37 Hz/ppm was observed, a substantial increase in sensitivity compared to previous reports of 10-50 Hz/ppm with the limit of detection at 5 ppb. Detection of other metal ions including Sn(2+), Ge(4+), Li(+), Zn(2+), Cu(2+), Bi(3+), Co(2+), Al(3+), Ni(2+), Ag(+), and Fe(3+) were also performed. Unexpectedly, binding of Mn(7+), Pb(2+), Cd(2+), and Cr(3+) increased resonant frequencies. The surface profile of melanin thin film upon binding to metal ions was investigated by atomic force microscopy (AFM). Structural change of melanin upon binding to metal ions was characterized by circular dichroism and by infrared spectroscopy. The current study provides the first example of melanin-coated piezoelectric sensor showing high sensitivity and selectivity to metal ions.     

Sorption of heavy metals from electroplating effluent using immobilized biomass Trichoderma viride in a continuous packed-bed column

The sorption of heavy metals ions by immobilized Trichoderma viride biomass in a packed-bed column was studied. Fungal biomass T. viride was immobilized to Ca-alginate used for removal of Cr(VI), Ni(II) and Zn(II) ions from synthetic solutions and electroplating effluent. The experiments were conducted to study the effect of important design parameters such as bed height, flow rate and initial concentration of metal ions. The maximum sorption capacity was observed at flow rate 5 ml/min, bed height 20 cm and metal ions concentration 50 mg/L with immobilized biomass. Whereas, breakthrough time and saturation time decreased with increase flow rate and metal ions concentration and an inverse condition was found in bed height. The bed depth service time (BDST) Adams-Bohart model was used to analyze the experimental data. The regeneration efficiency was observed 40.1%, 75% and 53% for Cr(VI), Ni(II) and Zn(II) without any significant alteration in sorption capacity after 5th sorption-desorption cycles.     

Ion exchange during heavy metal bio-sorption from aqueous solution by dried biomass of macrophytes

In this study, potentials of oven dried biomass of Eichhornia crassipes, Valisneria spiralis and Pistia stratiotes, were examined in terms of their heavy metal (Cd, Ni, Zn, Cu, Cr and Pb) sorption capacity, from individual-metal and multi-metal aqueous solutions at pH 6.0+/-0.1 (a popular pH of industrial effluent). V. spiralis was the most and E. crassipes was the least efficient for removal of all the metals. Cd, Pb and Zn were efficiently removed by all the three biomass. Cd was removed up to 98% by V. spiralis. Sorption data for Cr, Ni and Cd fitted better to Langmuir isotherm equation, while, the sorption data for Pb, Zn and Cu fitted better to Freundlich isotherm equation. In general, the presence of other metal ions did not influence significantly the targeted metal sorption capacity of the test plant biomasses. Ion exchange was proven the main mechanism involved in bio-sorption and there was a strong ionic balance between adsorbed (H(+) and M(2+)) to the released ions (Na(+) and K(+)) to and from the biomass. No significant difference was observed in the metal exchanged amount, by doubling of metal concentration (15-30 mg/l) in the solution and employing individual-metal and multi-metal solutions.     

Cyclization of several linear penta- and heptapeptides with different metal ions studied by CD spectroscopy.

A cyclic pentapeptide c(Tyr-Leu-Ala-Gly-Pro) (I), which was isolated and identified from Pseudostellaria heterophylla medicinal herbs, and two cyclic heptapeptides, c(Gly-Tyr-Gly-Gly-Pro-Phe-Pro) (II) and c(Gly-Ile-Pro-Tyr-Ile-Ala-Ala) (III), which were isolated and identified from Stellaria yunnanensis Franch (M), were synthesized by using 3-(diethoxyphosphoryloxy)-1,2,3-benzotriazin-4(3 H)-one (DEPBT) as a coupling reagent in solution, and mediated by different metal ions, from their linear peptide precursors H-Tyr-Leu-Ala-Gly-Pro-OH (I-1) and H-Ala-Gly-Pro-Tyr-Leu-OH (I-2), H-Gly-Tyr-Gly-Gly-Pro-Phe-Pro-OH (II-1) and H-Gly-Ile-Pro-Tyr-Ile-Ala-Ala-OH (III-1), respectively. The results show that alkali metal ions can improve the cyclization yields and/or the cyclization rates of linear peptide precursors, such as Na(+) ion is favorable for the cyclization of linear pentapeptides and Cs(+) ion is favorable for the cyclization of linear heptapeptides, while some bivalent and trivalent metal ions, such as Mg(2+), Ca(2+), Zn(2+), Fe(2+), Ni(2+) and Cr(3+) reduced/inhibited both the cyclization yields and the cyclization rates of the linear peptide precursors. The circular dichroism spectra of I-1, II-1 and III-1 with different metal ions were studied to elucidate the changes in their secondary structures. It is shown that Cs(+) can induce and stabilize the type I beta-turn conformation in the linear heptapeptide II-1 and the type II beta-turn conformation in the linear heptapeptide III-1.     

Biosorption of chromium, copper, manganese and zinc by Pseudomonas aeruginosa AT18 isolated from a site contaminated with petroleum

The study describes the sorption of Cr, Cu, Mn and Zn by Pseudomonas aeruginosa AT18 isolated from a site contaminated with petroleum and heavy metals. The concentrations studied were 50, 49, 60 and 70 (mg L(-1)) for Cr, Cu, Mn and Zn, respectively. The solution pH and ionic strength were very important factors in the metal biosorption performance and the biosorption capacity of P. aeruginosa AT18 for Cr3+,Cu2+, Mn2+ and Zn2+. In aqueous solution, the biosorption increased with increasing pH in the range 5.46-7.72. The results obtained in the experimental assays show that P. aeruginosa AT18 has the capacity for biosorption of the metallic ions Cr3+, Cu2+ and Zn2+ in solutions, although its capacity for the sorption of manganese is low (22.39 mg Mn2+/g of biomass) in comparison to the Cr3+, Cu2+ and Zn2+ ions, as shown by the individual analyses. However, 20% of the manganese was removed from an initial concentration of 49.0 mg L(-1), with a Qm value similar to that obtained in solutions containing mixtures of Cr3+, Cu2+, Mn2+and Zn2+. The chromium level sorbed by P. aeruginosa AT18 biomass was higher than that for Cu, Mn and Zn, with 100% removal in the pH range 7.00-7.72 and a Qm of 121.90-200.00 mg of Cr3+/g of biomass. The removal of Cr, Cu and Zn is also a result of precipitation processes.     

Characterization of structure and metal ions specificity of Co2+-binding RNA aptamers

Studies on RNA motifs capable of binding metal ions have largely focused on Mg(2+)-specific motifs, therefore information concerning interactions of other metal ions with RNA is still very limited. Application of the in vitro selection approach allowed us to isolate two RNA aptamers that bind Co(2+) ions. Structural analysis of their secondary structures revealed the presence of two motifs, loop E and "kissing" loop complex, commonly occurring in RNA molecules. The Co(2+)-induced cleavage method was used for identification of Co(2+)-binding sites after the determination of the optimal cleavage conditions. In the aptamers, Co(2+) ions seem to bind to N7 atoms of purines, inducing cleavage of the adjacent phosphodiester bonds, similarly as is the case with yeast tRNA(Phe). Although the in vitro selection experiment was carried out in the presence of Co(2+) ions only, the aptamers displayed broader metal ions specificity. This was shown by inhibition of Co(2+)-induced cleavages in the presence of the following transition metal ions: Zn(2+), Cd(2+), Ni(2+), and Co(NH(3))(6)(3+) complex. On the other hand, alkaline metal ions such as Mg(2+), Ca(2+), Sr(2+), and Ba(2+) affected Co(2+)-induced cleavages only slightly. Multiple metal ions specificity of Co(2+)-binding sites has also been reported for other in vitro selected or natural RNAs. Among many factors that influence metal specificity of the Co(2+)-binding pocket, chemical properties of metal ions, such as their hardness as well as the structure of the coordination site, seem to be particularly important.     

Heavy metal resistant freshwater ciliate, Euplotes mutabilis, isolated from industrial effluents has potential to decontaminate wastewater of toxic metals

The ciliate, Euplotes mutabilis, isolated from industrial wastewater of tanneries of Kasur, Pakistan, showed tolerance against Cd2+ (22 microg ml(-1)), Cr6+ (60 microg ml(-1)), Pb2+ (75 microg ml(-1)) and Cu2+ (22 microg ml(-1)). The heavy metals, Cr and Pb, were randomly selected for determining the capability of the ciliate to reduce the concentration of these metal ions in the medium and to evaluate its potential use as bioremediator of wastewater. The live protozoans could remove 97% of Pb2+ and 98% of Cr6+ from the medium, 96 h after inoculation of the medium containing 10 micro gml(-1) of metal ions. The acid digestion of ciliate showed 89% of Pb2+ and 93% of Cr6+ ions accumulated in the organism. When the ciliate was exposed to heavy metals at a larger scale viz., 10 l of water containing 10 micro gml(-1) of heavy metals, it removed 86% of Pb2+ and 90% of Cr6+ from the medium. The metal uptake ability of E. mutabilis, as evidenced by its survival and growth in 100ml and 10 l of water containing 10 microg ml(-1) of metal ions, reduction in the concentration of heavy metals in the medium and its increased uptake by the live cells, and no metal uptake by the heat killed ciliate can be exploited for metal detoxification of industrial wastes and environmental clean-up operations.     

Monocarboxylate Transporters are not Responsible for Cr3+ Transport from Endosomes

Cr(3+), similar to Fe(3+), is transported into cells primarily via endocytosis as the metal-transferrin complex. As Cr(3+) ions are not readily reduced under biological conditions, the ion cannot be transported from endosomes by the same mechanism as iron that utilized divalent metal ion transporters. Cr(3+) has been hypothesized to potentially be transported as small ligand complexes with a free carboxylate functionality by monocarboxylate transporters (MCT), in a similar fashion to that proposed for Al(3+). Consequently, mouse C2C12 muscle cells were utilized to determine if Cr(3+) is potentially transported by MCT by examining the effects of MCT inhibitors on Cr and Fe transport and subcellular distribution when the metals are added as their transferrin complexes. The results suggest that Cr is not primarily transported by MCT from the endosomes to the cytosol, and that another mechanism for this transport needs to be identified.