Xer-mediated site-specific recombination in vitro.

The Xer site-specific recombination system acts at ColE1 cer and pSC101 psi sites to ensure that these plasmids are in a monomeric state prior to cell division. We show that four proteins, ArgR, PepA, XerC and XerD are necessary and sufficient for recombination between directly repeated cer sites on a supercoiled plasmid in vitro. Only PepA, XerC and XerD are required for recombination at psi in vitro. Recombination at cer and psi in vitro requires negative supercoiling and is exclusively intramolecular. Strand exchange at cer produces Holliday junction-containing products in which only the top strands have been exchanged. This reaction requires the catalytic tyrosine residue of Xer C but not that of XerD. Recombination at psi gives catenated circular resolution products. Strand exchange at psi is sequential. XerC catalyses the first (top) strand exchange to make a Holiday junction intermediate and XerD catalyses the second (bottom) strand exchange.     

Control of Cre recombination by regulatory elements from Xer recombination systems

Site-specific recombination by the Cre recombinase takes place at a simple DNA site (loxP), requires no additional proteins and gives topologically simple recombination products. In contrast, cer and psi sites for Xer recombination contain approximately 150 bp of accessory sequences, require accessory proteins PepA, ArgR and ArcA, and the products are specifically linked to form a four-noded catenane. Here, we use hybrid sites consisting of accessory sequences of cer or psi fused to loxP to probe the function of accessory proteins in site-specific recombination. We show that PepA instructs Cre to produce four-noded catenane, but is not required for recombination at these hybrid sites. Mutants of Cre that require PepA and accessory sequences for efficient recombination were selected. PepA-dependent Cre gave products with a specific topology and displayed resolution selectivity. Our results reveal that PepA acts autonomously in the synapsis of psi and cer accessory sequences and is the main architectural element responsible for intertwining accessory site DNA. We suggest that accessory proteins can activate recombinases simply by synapsing the regulatory DNA sequences, thus bringing the recombination sites together with a specific geometry. This may occur without the need for protein-protein interactions between accessory proteins and the recombinases.     

PepA and ArgR do not regulate Cre recombination at the bacteriophage P1 loxP site

In the lysogenic state, bacteriophage P1 is maintained as a low copy-number circular plasmid. Site-specific recombination at loxP by the phage-encoded Cre protein keeps P1 monomeric, thus helping to ensure stable plasmid inheritance. Two Escherichia coli DNA-binding proteins, PepA and ArgR, were recently reported to be necessary for maintenance or establishment of P1 lysogeny. PepA and ArgR bind to regulatory DNA sequences upstream of the ColE1 cer recombination site to regulate site-specific recombination by the XerCD recombinases. This recombination keeps ColE1 in a monomeric state and helps to ensure stable plasmid maintenance. It has been suggested that ArgR and PepA play a similar role in P1 maintenance, regulating Cre recombination by binding to DNA sequences upstream of loxP. Here, we show that ArgR does not bind to its proposed binding site upstream of loxP, and that Cre recombination at loxP in its natural P1 context is not affected by PepA and ArgR in vitro. When sequences upstream of loxP were mutated to allow ArgR binding, PepA and ArgR still had no effect on Cre recombination. Our results demonstrate that PepA requires specific DNA sequences for binding, and that PepA and ArgR have no direct role in Cre recombination at P1 loxP.     

Nucleoprotein architecture and ColE1 dimer resolution: a hypothesis

Dimers of plasmid ColE1 are converted to monomers by site-specific recombination, a process that requires 240 bp of DNA ( cer ) and four host-encoded proteins (XerC, XerD, ArgR and PepA). Here, we propose structures for nucleoprotein complexes involved in cer –Xer recombination based upon existing knowledge of the structures of component proteins and computational analyses of protein structure and DNA curvature. We propose that, in the nucleoprotein complex at a single cer site, a PepA hexamer acts as an adaptor, connecting the heterodimeric recombinase (XerCD) to an ArgR hexamer. This provides a protein core around which the cer site wraps, its exact path being defined by strong sequence-specific interactions with ArgR and XerCD, weak interactions with PepA and sequence-dependent flexibility of cer . The initial association of single-site complexes (pairing) is proposed to occur via an ArgR–PepA interaction. Pairing between sites in a plasmid dimer is stabilized by DNA supercoiling and is followed by a structural isomerization to form a recombination-proficient synaptic complex. We propose that paired structures formed between sites in trans are too short-lived to permit synaptic complex formation. There is thus an energetic barrier to inappropriate recombination reactions. Our proposals are consistent with a wide range of experimental observations.     

The ArcA/ArcB two-component regulatory system of Escherichia coli is essential for Xer site-specific recombination at psi

Two recombinases, XerC and XerD, act at the recombination sites psi and cer in plasmids pSC101 and ColE1 respectively. Recombination at these sites maintains the plasmids in a monomeric state and helps to promote stable plasmid inheritance. The accessory protein PepA acts at both psi and cer to ensure that only intramolecular recombination takes place. An additional accessory protein, ArgR, is required for recombination at cer but not at psi . Here, we demonstrate that the ArcA/ArcB two-component regulatory system of Escherichia coli , which mediates adaptation to anaerobic growth conditions, is required for efficient recombination in vivo at psi . Phosphorylated ArcA binds to psi in vitro and increases the efficiency of recombination at this site. Binding of ArcA to psi may contribute to the formation of a higher order synaptic complex between a pair of psi sites, thus helping to ensure that recombination is intramolecular.     

Xer-mediated site-specific recombination at cer generates Holliday junctions in vivo.

Normal segregation of the Escherichia coli chromosome and stable inheritance of multicopy plasmids such as ColE1 requires the Xer site-specific recombination system. Two putative lambda integrase family recombinases, XerC and XerD, participate in the recombination reactions. We have constructed an E. coli strain in which the expression of xerC can be tightly regulated, thereby allowing the analysis of controlled recombination reactions in vivo. Xer-mediated recombination in this strain generates Holliday junction-containing DNA molecules in which a specific pair of strands has been exchanged in addition to complete recombinant products. This suggests that Xer site-specific recombination utilizes a strand exchange mechanism similar or identical to that of other members of the lambda integrase family of recombination systems. The controlled in vivo recombination reaction at cer requires recombinase and two accessory proteins, ArgR and PepA. Generation of Holliday junctions and recombinant products is equally efficient in RuvC- and RuvC+ cells, and in cells containing a multicopy RuvC+ plasmid. Controlled XerC expression is also used to analyse the efficiency of recombination between variant cer sites containing sequence alterations and heterologies within their central regions.     

ArgR and PepA, accessory proteins for XerCD-mediated resolution of ColE1 dimers, are also required for stable maintenance of the P1 prophage

Dimers of low copy number plasmids must be resolved to monomers to prevent interference with active partition. For the P1 prophage this is achieved by the Cre site-specific recombinase acting at lox. Multimerisation of multicopy plasmids threatens stability via copy number depression, and multimers of ColE1 are resolved by XerCD-mediated recombination at cer. Xer-cer is constrained to multimer resolution by accessory proteins ArgR and PepA. Recently, it has been shown that ArgR and PepA influence Cre-mediated recombination at a cer-lox hybrid site in vitro, defining the structure of the synaptic complex. We show here that both ArgR and PepA are required for stable maintenance of the P1 prophage. It is extremely difficult to establish P1 in a strain lacking PepA and the prophage was lost rapidly once selection was removed. ArgR plays a less crucial role although its absence significantly increased prophage loss. The effect of the accessory proteins is seen only at physiological concentrations of Cre; when the recombinase is expressed from a multicopy plasmid, the prophage is unstable even in the presence of ArgR and PepA. We propose that ArgR and PepA are involved in Cre-lox recombination in vivo, probably by constraining the system to resolution of prophage dimers.     

Peptidase activity of Escherichia coli aminopeptidase A is not required for its role in Xer site-specific recombination

Xer site-specific recombination is required for the stable inheritance of multicopy plasmids and the normal segregation of the bacterial chromosome in Escherichia coli.Two related recombinases and two accessory proteins are essential for Xer-mediated recombination at cer, a recombination site in the plasmid ColE1 The accessory proteins, ArgR and PepA, function in ensuring that the Xer recombination reaction acts exclusively intramolecularly, converting plasmid dimers into monomers and not vice versa. PepA is an amino-exopeptidase, but its molecular role in the Xer recombination mechanism is unclear. Here we show that a mutation directed at the presumptive active site of PepA creates a protein with no detectable peptidase activity in vitro or in vivo, but which still functions normality in Xer site-specific recombination at cer.     

Differential regulation of multiple overlapping promoters in flagellar class II operons in Escherichia coli

The cer –Xer dimer resolution system of plasmid ColE1 is highly selective, acting only at sites on the same molecule and in direct repeat. Recombination requires the XerCD recombinase and accessory proteins ArgR and PepA. The Escherichia coli chromosome dimer resolution site dif and the type II hybrid site use the same recombinase but are independent of ArgR and PepA and show no site selectivity. This has led to the proposal that ArgR and PepA are responsible for the imposition of constraint. We describe here the characterization of a novel class of 'conditionally constrained' multimer resolution sites whose properties support this hypothesis. In the presence of ArgR and PepA, plasmids containing conditionally constrained sites are monomeric, but in their absence, extensive multimerisation is seen. A mutant ArgR derivative (ArgR110), which is defective in cer -mediated dimer resolution, remains able to prevent plasmid multimerisation by a conditionally constrained site. This implies that the accessory factors block recombination in trans rather than ensuring rapid multimer resolution. When the distance between the ArgR and XerCD binding sites in a conditionally constrained site was altered by a non-integral number of helical turns, the site became unconstrained. Constraint was restored by the insertion of a full helical turn.     

Topology of Xer recombination on catenanes produced by lambda integrase.

Xer site-specific recombination at the psi site from plasmid pSC101 displays topological selectivity, such that recombination normally occurs only between directly repeated sites on the same circular DNA molecule. This intramolecular selectivity is important for the biological role of psi, and is imposed by accessory proteins PepA and ArcA acting at accessory DNA sequences adjacent to the core recombination site. Here we show that the selectivity for intramolecular recombination at psi can be bypassed in multiply interlinked catenanes. Xer site-specific recombination occurred relatively efficiently between antiparallel psi sites located on separate rings of right-handed torus catenanes containing six or more nodes. This recombination introduced one additional node into the catenanes. Antiparallel sites on four-noded right-handed catenanes, the normal product of Xer recombination at psi, were not recombined efficiently. Furthermore, parallel psi sites on right-handed torus catenanes were not substrates for Xer recombination. These findings support a model in which psi sites are plectonemically interwrapped, trapping a precise number of supercoils that are converted to four catenation nodes by Xer strand exchange.     

Accessory factors determine the order of strand exchange in Xer recombination at psi

Xer site-specific recombination in Escherichia coli converts plasmid multimers to monomers, thereby ensuring their correct segregation at cell division. Xer recombination at the psi site of plasmid pSC101 is preferentially intramolecular, giving products of a single topology. This intramolecular selectivity is imposed by accessory proteins, which bind at psi accessory sequences and activate Xer recombination at the psi core. Strand exchange proceeds sequentially within the psi core; XerC first exchanges top strands to produce Holliday junctions, then XerD exchanges bottom strands to give final products. In this study, recombination was analysed at sites in which the psi core was inverted with respect to the accessory sequences. A plasmid containing two inverted-core psi sites recombined with a reversed order of strand exchange, but with unchanged product topology. Thus the architecture of the synapse, formed by accessory proteins binding to accessory sequences, determines the order of strand exchange at psi. This finding has important implications for the way in which accessory proteins interact with the recombinases.     

Communication between accessory factors and the Cre recombinase at hybrid psi-loxP sites

By placing loxP adjacent to the accessory sequences from the Xer/psi multimer resolution system, we have imposed topological selectivity and specificity on Cre/loxP recombination. In this hybrid recombination system, the Xer accessory protein PepA binds to psi accessory sequences, interwraps them, and brings the loxP sites together such that the product of recombination is a four-node catenane. Here, we investigate communication between PepA and Cre by varying the distance between loxP and the accessory sequences, and by altering the orientation of loxP. The yield of four-node catenane and the efficiency of recombination in the presence of PepA varied with the helical phase of loxP with respect to the accessory sequences. When the orientation of loxP was reversed, or when half a helical turn was added between the accessory sequences and loxP, PepA reversed the preferred order of strand exchange by Cre at loxP. The results imply that PepA and the accessory sequences define precisely the geometry of the synapse formed by the loxP sites, and that this overcomes the innate preference of Cre to initiate recombination on the bottom strand of loxP. Further analysis of our results demonstrates that PepA can stimulate strand exchange by Cre in two distinct synaptic complexes, with the C-terminal domains of Cre facing either towards or away from PepA. Thus, no specific PepA-recombinase interaction is required, and correct juxtaposition of the loxP sites is sufficient to activate Cre in this system.     

Site-specific recombination between ColE1 tcer and NTP16 nmr sites in vivo

The site-specific recombination system used by multicopy plasmids of the ColE1 family uses two identical plasmid-encoded recombination sites and four bacterial proteins to catalyze the recombination reaction. In the case of the Escherichia coli plasmid ColE1, the recombination site, cer, is a 280 by DNA sequence which is acted on by the products of the argR, pepA, xerC and xerD genes. We have constructed a model system to study this recombination system, using tandemly repeated recombination sites from the plasmids ColE1 and NTP16. These plasmids have allowed us precisely to define the region of strand exchange during site-specific recombination, and to derive a model for cer intramolecular site-specific recombination.     

Site-specific recombination between ColE1 tcer and NTP16 nmr sites in vivo

The site-specific recombination system used by multicopy plasmids of the ColE1 family uses two identical plasmid-encoded recombination sites and four bacterial proteins to catalyze the recombination reaction. In the case of the Escherichia coli plasmid ColE1, the recombination site, cer, is a 280 by DNA sequence which is acted on by the products of the argR, pepA, xerC and xerD genes. We have constructed a model system to study this recombination system, using tandemly repeated recombination sites from the plasmids ColE1 and NTP16. These plasmids have allowed us precisely to define the region of strand exchange during site-specific recombination, and to derive a model for cer intramolecular site-specific recombination.     

Self-control in DNA site-specific recombination mediated by the tyrosine recombinase TnpI

Tn4430 is a distinctive transposon of the Tn3 family that encodes a tyrosine recombinase (TnpI) to resolve replicative transposition intermediates. The internal resolution site of Tn4430 (IRS, 116 bp) contains two inverted repeats (IR1 and IR2) at the crossover core site, and two additional TnpI binding motifs (DR1 and DR2) adjacent to the core. Deletion analysis demonstrated that DR1 and DR2 are not required for recombination in vivo and in vitro. Their function is to provide resolution selectivity to the reaction by stimulating recombination between directly oriented sites on a same DNA molecule. In the absence of DR1 and/or DR2, TnpI-mediated recombination of supercoiled DNA substrates gives a mixture of topologically variable products, while deletion between two wild-type IRSs exclusively produces two-noded catenanes. This demonstrates that TnpI binding to the accessory motifs DR1 and DR2 contributes to the formation of a specific synaptic complex in which catalytically inert recombinase subunits act as architectural elements to control recombination sites pairing and strand exchange. A model for the organization of TnpI/IRS recombination complex is presented.     

DNA binding of Escherichia coli arginine repressor mutants altered in oligomeric state

The Escherichia coli arginine repressor (ArgR) controls expression of the arginine biosynthetic genes and acts as an accessory protein in Xer site-specific recombination at cer and related plasmid recombination sites. The hexameric wild-type protein shows L -arginine-dependent DNA binding. In this work, ArgR mutants that are defective in trimer–trimer interactions and bind DNA as trimers in an L -arginine-independent manner are isolated and characterized. Whereas the wild-type ArgR hexamer exhibits high-affinity binding to two repeated ARG boxes separated by 3 bp (each ARG box containing two identical dyad symmetrical 9 bp half-sites), the trimeric mutants bind to and footprint three adjacent half-sites of this 'idealized' substrate. Trimeric ArgR is impaired in its ability to repress the arginine biosynthetic genes and in Xer site-specific recombination. In the absence of L -arginine, residual wild-type ArgR-binding occurs as trimers. The binding of an N-terminal 77-amino-acid DNA-binding domain to idealized ARG boxes is also characterized.     

Lipooligosaccharide biosynthesis in Neiseria gonorrhoeae: cloning, identification and characterization of the α1,5 heptosyltransferase I gene (rfaC)

The Escherichia coli arginine repressor (ArgR) is an l -arginine-dependent DNA-binding protein that controls expression of the arginine biosynthetic genes and is required as an accessory protein in Xer site-specific recombination at cer and related recombination sites in plasmids. Site-directed mutagenesis was used to isolate two mutants of E. coli ArgR that were defective in arginine binding. Results from in vivo and in vitro experiments demonstrate that these mutants still act as repressors and bind their specific DNA sequences in an arginine-independent manner. Both mutants support Xer site-specific recombination at cer. One of the mutant proteins was purified and shown to bind to its DNA target sequences in vitro with different affinity and as a different molecular species to wild-type ArgR.     

Characterization of pECL18 and pKPN2: a proposed pathway for the evolution of two plasmids that carry identical genes for a Type II restriction-modification system

The primary structures of the plasmids pECL18 (5571 bp) and pKPN2 (4196 bp) from Escherichia coli and Klebsiella pneumoniae, respectively, which carry genes for a Type II restriction-modification system (RMS2) with the specificity 5'-CCNGG-3', were determined in order to elucidate the structural relationship between them. The data suggest a possible role for recombination events at bom (basis of mobility) regions and the sites of resolution of multimer plasmid forms (so-called cer sequences) in the structural evolution of multicopy plasmids. Analysis of the sequences of pECL18 and pKPN2 showed that the genes for RM* Ecl18kI and RM* Kpn2kI, and the sequences of the rep (replication) regions in the two plasmids, are almost identical. In both plasmids, these regions are localized between the bom regions and the cer sites. The rest of the pECL18 sequence is almost identical to that of the mob (mobilization) region of ColE1, and the corresponding segment of pKPN2 is almost identical to part of pHS-2 from Shigella flexneri. The difference in primary structures results in different mobilization properties of pECL18 and pKPN2. The complete sequences of pECL18, pKPN2 and the pairwise comparison of the sequences of pECL18, pKPN2, ColE1 and pHS-2 suggest that plasmids may exchange DNA units via site-specific recombination events at bom and cer sites. In the course of BLASTN database searches using the cer sites of pECL18 and pKPN2 as queries, we found twenty cer sites of natural plasmids. Alignment of these sequences reveals that they fall into two classes. The plasmids in each group possess related segments between their cer and bom sites.