Pinocytosis and locomotion of amoebae. XIX. Immunocytochemical demonstration of actin and myosin in Amoeba proteus

The spatial distribution of cytoplasmic actin and myosin in 1. normal locomoting, 2. immobilized, and 3. pinocytosing Amoeba proteus was demonstrated by indirect immunofluorescence microscopy. In orthotactic and polytactic cells fixed during normal locomotion actin is mainly located in a cortical layer delineating the granuloplasm from the peripheral hyaloplasm. In cell areas lacking a hyaloplasmic sheet the actin layer immediately borders the plasma membrane. The amount of actin within the continuous layer seems to increase from the advancing front to the middle cell region and to decrease again toward the uroid. The distribution of myosin is largely congruent to the display of actin, with the exception that the myosin-based fluorescence of the cortical layer gradually increases from the front to the uroid. A considerable amount of actin and myosin is also distributed around the nucleus and the contractile vacuole. In immobilized cells contracted by the external application of 10(-4)M procaine hydrochloride the cortical layer distinctly increases in thickness. In contrast to normal locomoting cells actin and myosin show a uniform distribution within the cell cortex along the entire surface. In pinocytosing cells, up to three cortical layers conspicuously rich in actin are produced during the process of channel formation. One of these layers is located in close proximity to the plasma membrane of the pinocytotic channels and the vacuoles. The immunocytochemical results are discussed with respect to earlier observations on the distribution of actin and myosin in Amoeba proteus as obtained by other methods.     

Spatial organization and fine structure of the cortical filament layer in normal locomoting Amoeba proteus

Summary The fine structural organization of a cortical filament layer in normal locomoting Amoeba proteus was demonstrated using improved fixation and embedding techniques. Best results were obtained after application of PIPES-buffered glutaraldehyde in connection with substances known to prevent the depolymerization of F-actin, followed by careful dehydration and freeze-substitution.The filament layer is continuous along the entire surface; it exhibits a varying thickness depending on the cell polarity, measuring several nm in advancing regions and 0.5–1 m in retracting ones. Two different types of filaments are responsible for the construction of the layer: randomly distributed thin (actin) filaments forming an unordered meshwork beneath the plasma membrane, and thick (myosin) filaments mostly restricted to the uroid region in close association with F-actin.The cortical filament layer generates the motive force for amoeboid movement by contraction at posterior cell regions and induces a pressure flow that continues between the uroid with a high hydrostatic pressure and advancing pseudopodia with a low one. The local destabilization of the cell surface as a precondition for the formation of pseudopodia is enabled by the detachment of the cortical filament layer from the plasma membrane. This results in morphological changes by the active separation of peripheral hyaloplasmic and central granuloplasmic regions.     

Localised depletion of polymerised actin at the front of Walker carcinosarcoma cells increases the speed of locomotion

Spontaneously migrating Walker carcinosarcoma cells usually form lamellipodia at the front. Combined treatment with 10(-5)M colchicine and 10(-7)M latrunculin A produces large defects in the cortical F-actin layer at the leading front and suppresses lamellipodia. However, the cortical actin layer at the rear is intact and shows myosin IIA accumulation. These cells, showing no or little detectable cortical F-actin at the front and no morphologically recognisable protrusions, migrate faster than control cells with lamellipodia and an intact cortical actin layer. This documents that the cortical actin layer or actin-powered force generation at the front is redundant for locomotion. Colchicine and latrunculin A have synergistic effects in compromising the cortical layer at the front and in increasing the speed of locomotion, but antagonistic effects on the relative amount of F-actin per cell. Colchicine but not latrunculin A, can increase the proportion of polarised and locomoting cells under appropriate conditions. Locomotion and polarity of cells treated with latrunculin A and colchicine is inhibited at latrunculin A concentrations >10(-7)M, by the myosin inhibitor BDM or the ROCK inhibitor Y-27632. Colchicine and Y-27632 have antagonistic effects on polarity and the speed of locomoting cells. The data show that locomotion of metazoan cells, which normally form lamellipodia, can be driven by actomyosin contraction behind the front (cell body, uropod). They are best compatible with a cortical contraction/frontal expansion model, but they are not compatible with models implying that actin polymerisation or actomyosin contraction at the front drive locomotion of the cells studied.     

Identification of Novel Graded Polarity Actin Filament Bundles in Locomoting Heart Fibroblasts: Implications for the Generation of Motile Force

We have determined the structural organization and dynamic behavior of actin filaments in entire primary locomoting heart fibroblasts by S1 decoration, serial section EM, and photoactivation of fluorescence. As expected, actin filaments in the lamellipodium of these cells have uniform polarity with barbed ends facing forward. In the lamella, cell body, and tail there are two observable types of actin filament organization. A less abundant type is located on the inner surface of the plasma membrane and is composed of short, overlapping actin bundles (0.25–2.5 μm) that repeatedly alternate in polarity from uniform barbed ends forward to uniform pointed ends forward. This type of organization is similar to the organization we show for actin filament bundles (stress fibers) in nonlocomoting cells (PtK2 cells) and to the known organization of muscle sarcomeres. The more abundant type of actin filament organization in locomoting heart fibroblasts is mostly ventrally located and is composed of long, overlapping bundles (average 13 μm, but can reach up to about 30 μm) which span the length of the cell. This more abundant type has a novel graded polarity organization. In each actin bundle, polarity gradually changes along the length of the bundle. Actual actin filament polarity at any given point in the bundle is determined by position in the cell; the closer to the front of the cell the more barbed ends of actin filaments face forward.

By photoactivation marking in locomoting heart fibroblasts, as expected in the lamellipodium, actin filaments flow rearward with respect to substrate. In the lamella, all marked and observed actin filaments remain stationary with respect to substrate as the fibroblast locomotes. In the cell body of locomoting fibroblasts there are two dynamic populations of actin filaments: one remains stationary and the other moves forward with respect to substrate at the rate of the cell body.

This is the first time that the structural organization and dynamics of actin filaments have been determined in an entire locomoting cell. The organization, dynamics, and relative abundance of graded polarity actin filament bundles have important implications for the generation of motile force during primary heart fibroblast locomotion.

     

Dynamics of the cytoskeleton inAmoeba proteus: II. Influence of different agents on the spatial organization of microinjected fluorescein-labeled actin

Summary Iodoacetamido-fluorescein-(IAF)-labeled actin was microinjected into normal locomotingAmoeba proteus. Thereafter (30–60 minutes) changes in the cytoplasmic fluorescence distribution pattern and contractile activity were induced by internal and external chemical stimulation. Different agents such as phalloidin, procaine, 2.4-dinitrophenol (DNP), puromycin, ouabain and n-ethyl maleimide (NEM) interfere with the excitation-contraction mechanism involved in ordered pseudopodium formation during ameboid movement and cause various morphogenetic reactions based on actin polymerization-depolymerization cycles. Most frequent changes are (a) local condensation of IAF-actin and formation of a continuous IAF-actin layer at the cytoplasmic surface of the cell membrane and around the pulsating vacuole, (b) immobilization and hyalo-granuloplasm separation by combined contraction and detachment of the IAF-actin layer from the cell membrane, (c) organized and disorganized formation of pseudopodia by local contraction and disintegration of the IAF-actin layer, and (d) alterations in the rheological properties of the protoplasmic matrix by changes in the molecular state of soluble actin not incorporated into the cytoskeleton. The experimental approaches to the function of the actomyosin system in large amebas attainable by the method ofin vivo molecular cytochemistry are discussed in detail with respect to the participation of the cytoskeleton in motive force generation for cytoplasmic streaming and ameboid movement.     

Suction pressure can induce uncoupling of the plasma membrane from cortical actin

We tested the hypothesis that a pressure difference can cause blebbing associated with uncoupling of the plasma membrane from the cortical actin, a phenomenon found earlier in locomoting blebbing Walker carcinosarcoma cells. Untreated, initially spherical Walker carcinosarcoma cells were exposed to suction pressure by partial aspiration into micropipettes. The suction pressure required to induce blebbing was in the range of 0.9-3 cm H2O, i.e., somewhat lower than the increase in intracellular pressure measured before formation of protrusions in Amoeba proteus (Yanai et al., Cell Motil. Cytoskeleton 33, 22-29, 1996). The response was temperature-dependent, blebbing occurring more frequently at 37 degrees C than at room temperature. Blebbing was associated with formation of cytoplasmic actin layers, restriction rings and/or of gaps in the plasma membrane-associated cortical actin. The results support the view that blebbing associated with uncoupling of cortical actin and plasma membrane as observed in locomoting cells can be caused by a pressure gradient.     

Is actin involved in the nuclear division in Amoeba proteus?

During semi-open mitosis of Amoeba proteus the nuclear envelope is not dispersed and nucleus divides by fission. The presence of actin layer close to nuclear envelope was demonstrated in interphase and telophase nuclei of that amoeba stained with rhodamine labelled phalloidin. In telophase, an accumulation of actin arises in the space between the future daughter nuclei. It appears to be comparable with the contractile ring of dividing cells. This suggests that actin associated with the nuclear envelope of Amoeba proteus may be involved in final separation of the daughter nuclei, forming a constriction ring at the middle of dividing nucleus.     

Phosphorylation of Amoeba G-actin and its effect on actin polymerization

Mass culture of Amoeba proteus enabled us to do biochemical studies on this organism. Actin and profilin were purified from Amoeba to examine actin phosphorylation and polymerization. The apparent molecular weight of Amoeba actin was 44,000, and its isoelectric point was 5.8. The apparent molecular weight of Amoeba profilin was 12,000, and its isoelectric point was 4.9. It reduced the rate of actin polymerization as reported in the cases of profilins from other organisms. A protein of Mr = 44,000 (44 K protein) was phosphorylated in a Ca2+-dependent manner in cell homogenate of Amoeba without being inhibited by calmodulin antagonists. Using the homogenate as a kinase, purified Amoeba G-actin could be phosphorylated in proportion to the amount of actin. However, neither Amoeba F-actin nor rabbit skeletal muscle G-actin was phosphorylated. The phosphorylation of Amoeba actin with a kinase partially purified from A. proteus increased with dilution of the actin concentration. When Amoeba profilin was added, more than 80% of the actin was phosphorylated. By viscometry, electron microscopy, and ultracentrifugation analysis it was demonstrated that Amoeba G-actin phosphorylated in the presence of profilin and kinase did not polymerize in this solution. High-performance liquid chromatography analysis showed that phosphorylated Amoeba actin remained in a monomeric state even under conditions favorable for actin polymerization.     

Visualization and measurement of calcium transients in Amoeba proteus by fura-2 fluorescence

A fura-2 microspectrofluorimeter was used to visualize and measure intracellular calcium transients in normal locomoting and experimentally treated Amoeba proteus. The results show that subcellular heterogeneities of cytosolic free calcium, [Ca2+]i, correlate in time and distribution with characteristic patterns of protoplasmic streaming and ameboid movement. In detail, calcium ions have a dual effect by regulating both the contractile activities of the actomyosin cortex and the rheological properties of the cytoplasmic matrix. A high resting [Ca2+]i of 1.5 to 2.0 x 10(-7) M in the uroid region or in retracting pseudopodia is associated with the transformation of rigid ectoplasmic gel into fluid endoplasmic sol, and a low [Ca2+]i of 10(-9) to 10(-8) M in the front region or in extending pseudopodia with the re-transformation of endoplasmic sol into ectoplasmic gel. Locally increased peripheral [Ca2+]i accumulations higher than 10(-7) M are also observed at places where the actomyosin cortex is known to generate motive force by contraction, i.e., in the intermediate region of orthotactic amebas or in large pseudopodia of polytactic cells. External application of 30 mM KCl abolishes the intracellular Ca2+ gradient such that [Ca2+]i attains a uniform distribution and a maximum concentration of 2 x 10(-7) M; as a consequence, cells can show a transient loss of their locomotor activity and polarity by undergoing spherulation and total contraction. On the other hand, high external Ca2+ concentrations in the range of 100 mM stabilize the bipolar cellular organization, enhance the movement velocity and induce the propagation of Ca2+ waves repeatedly running from the uroid to the front region. The significance of external ions for signal transmission and the control of dynamic activities as well as the origin and fate of calcium participating in the observed transients are discussed.     

Characterization of Amoeba proteus myosin VI immunoanalog

Amoeba proteus, the highly motile free-living unicellular organism, has been widely used as a model to study cell motility. However, molecular mechanisms underlying its unique locomotion and intracellular actin-based-only trafficking remain poorly understood. A search for myosin motors responsible for vesicular transport in these giant cells resulted in detection of 130-kDa protein interacting with several polyclonal antibodies against different tail regions of human and chicken myosin VI. This protein was binding to actin in the ATP-dependent manner, and immunoprecipitated with anti-myosin VI antibodies. In order to characterize its possible functions in vivo, its cellular distribution and colocalization with actin filaments and dynamin II during migration and pinocytosis were examined. In migrating amoebae, myosin VI immunoanalog localized to vesicular structures, particularly within the perinuclear and sub-plasma membrane areas, and colocalized with dynamin II immunoanalog and actin filaments. The colocalization was even more evident in pinocytotic cells as proteins concentrated within pinocytotic pseudopodia. Moreover, dynamin II and myosin VI immunoanalogs cosedimented with actin filaments, and were found on the same isolated vesicles. Blocking endogenous myosin VI immunoanalog with anti-myosin VI antibodies inhibited the rate of pseudopodia protrusion (about 19% decrease) and uroidal retraction (about 28% decrease) but did not affect cell morphology and the manner of cell migration. Treatment with anti-human dynamin II antibodies led to changes in directionality of amebae migration and affected the rate of only uroidal translocation (about 30% inhibition). These results indicate that myosin VI immunoanalog is expressed in protist Amoeba proteus and may be involved in vesicle translocation and cell locomotion.     

Immunodetection and intracellular localization of caldesmon-like proteins in Amoeba proteus

Summary. Caldesmon immunoanalogues were detected in Amoeba proteus cell homogenates by the Western blot technique. Three immunoreactive bands were recognized by polyclonal antibodies against the whole molecule of chicken gizzard caldesmon as well as by a monoclonal antibody against its C-terminal domain: one major and two minor bands corresponding to proteins with apparent molecular masses of 150, 69, and 60 kDa. The presence of caldesmon-like protein(s) in amoebae was revealed as well in single cells after their fixation, staining with the same antibodies, and recording their total fluorescence in a confocal laser scanning microscope. Proteins recognized by the antibodies bind to filamentous actin. This was established by a cosedimentation assay in cell homogenates and by colocalization of the caldesmon-related immunofluorescence with the fluorescence of filamentous actin stained with rhodamine-labelled phalloidin, demonstrated in optical sections of single cells in a confocal microscope. Caldesmon is colocalized with filamentous actin in the withdrawn cell regions where the cortical actomyosin network contracts and actin is depolymerized, in the frontal zone where actin is polymerized again and the cortical cytoskeleton is reconstructed, inside the nucleus and in the perinuclear cytoskeleton, and probably at the cell-to-substratum adhesion sites. The regulatory role of caldesmon in these functionally different regions of locomoting amoebae is discussed.Correspondence and reprints: Department of Cell Biology, Nencki Institute of Experimental Biology, ulica Pasteura 3, 02-093 Warsaw, Poland.Received October 7, 2002; accepted December 2, 2002; published online August 26, 2003     

Mechanosensitive axon outgrowth mediated by L1-laminin clutch interface

Mechanical properties of the extracellular environment modulate axon outgrowth. Growth cones at the tip of extending axons generate traction force for axon outgrowth by transmitting the force of actin filament retrograde flow, produced by actomyosin contraction and F-actin polymerization, to adhesive substrates through clutch and cell adhesion molecules. A molecular clutch between the actin filament flow and substrate is proposed to contribute to cellular mechanosensing. However, the molecular identity of the clutch interface responsible for mechanosensitive growth cone advance is unknown. We previously reported that mechanical coupling between actin filament retrograde flow and adhesive substrates through the clutch molecule shootin1a and the cell adhesion molecule L1 generates traction force for axon outgrowth and guidance. Here, we show that cultured mouse hippocampal neurons extend longer axons on stiffer substrates under elastic conditions that correspond to the soft brain environments. We demonstrate that this stiffness-dependent axon outgrowth requires actin-adhesion coupling mediated by shootin1a, L1, and laminin on the substrate. Speckle imaging analyses showed that L1 at the growth cone membrane switches between two adhesive states: L1 that is immobilized and that undergoes retrograde movement on the substrate. The duration of the immobilized phase was longer on stiffer substrates; this was accompanied by increases in actin-adhesion coupling and in the traction force exerted on the substrate. These data suggest that the interaction between L1 and laminin is enhanced on stiffer substrates, thereby promoting force generation for axon outgrowth.     

Profilin 1 is required for abscission during late cytokinesis of chondrocytes

Profilins are key factors for dynamic rearrangements of the actin cytoskeleton. However, the functions of profilins in differentiated mammalian cells are uncertain because profilin deficiency is early embryonic lethal for higher eukaryotes. To examine profilin function in chondrocytes, we disrupted the profilin 1 gene in cartilage (Col2pfn1). Homozygous Col2pfn1 mice develop progressive chondrodysplasia caused by disorganization of the growth plate and defective chondrocyte cytokinesis, indicated by the appearance of binucleated cells. Surprisingly, Col2pfn1 chondrocytes assemble and contract actomyosin rings normally during cell division; however, they display defects during late cytokinesis as they frequently fail to complete abscission due to their inability to develop strong traction forces. This reduced force generation results from an impaired formation of lamellipodia, focal adhesions and stress fibres, which in part could be linked to an impaired mDia1‐mediated actin filament elongation. Neither an actin nor a poly‐proline binding‐deficient profilin 1 is able to rescue the defects. Taken together, our results demonstrate that profilin 1 is not required for actomyosin ring formation in dividing chondrocytes but necessary to generate sufficient force for abscission during late cytokinesis.     

ROCK1 and 2 differentially regulate actomyosin organization to drive cell and synaptic polarity

RhoGTPases organize the actin cytoskeleton to generate diverse polarities, from front–back polarity in migrating cells to dendritic spine morphology in neurons. For example, RhoA through its effector kinase, RhoA kinase (ROCK), activates myosin II to form actomyosin filament bundles and large adhesions that locally inhibit and thereby polarize Rac1-driven actin polymerization to the protrusions of migratory fibroblasts and the head of dendritic spines. We have found that the two ROCK isoforms, ROCK1 and ROCK2, differentially regulate distinct molecular pathways downstream of RhoA, and their coordinated activities drive polarity in both cell migration and synapse formation. In particular, ROCK1 forms the stable actomyosin filament bundles that initiate front–back and dendritic spine polarity. In contrast, ROCK2 regulates contractile force and Rac1 activity at the leading edge of migratory cells and the spine head of neurons; it also specifically regulates cofilin-mediated actin remodeling that underlies the maturation of adhesions and the postsynaptic density of dendritic spines.     

Contractile basis of ameboid movement. VII. The distribution of fluorescently labeled actin in living amebas

The technique of molecular cytochemistry has been used to follow the distribution of fluorescently labeled actin in living Chaos carolinensis and Amoeba proteus during ameboid movement and various cellular processes. The distribution of 5-iodoacetamidofluorescein- labeled actin was compared with that of Lissamine rhodamine B sulfonyl chloride-labeled ovalbumin microinjected into the same cell and recorded with an image intensification microscope system. Actively motile cells demonstrated a rather uniform distribution of actin throughout most of the cytoplasm, except in the tail ectoplasm and in plasma gel sheets, where distinct actin structures were observed. In addition, actin-containing structures were induced in the cortex during wound healing, concanavalin A capping, pinocytosis, and contractions elicited by phalloidin injections. The formation of distinct fluorescent actin structures has been correlated with contractile activities.     

Dynamics of the cytoskeleton in Amoeba proteus. III. Influence of microinjected antibodies on the organization and function of the microfilament system

Affinity-purified antibodies against actin, myosin, alpha-actinin and vinculin cross-reacted with corresponding proteins from Amoeba proteus in immunoblotting experiments. Antibody staining of cells fixed during locomotion revealed different distribution patterns with a local concentration of anti-actin in the intermediate and of anti-myosin in the uroid region. Anti-alpha-actinin labeled a thin layer at the internal face of the plasma membrane, whereas anti-vinculin was distinctly concentrated at the base of advancing pseudopodia. Microinjection of different control solutions or antibodies against actin, myosin and alpha-actinin neither influenced the normal morphology and motile activity of amoebae nor changed the cellular distribution pattern of complementary antigens. However, antibodies against vinculin disorganized controlled locomotion and altered the spatial morphology of the microfilament system as well as the localization of the vinculin antigen thus pointing to a function of this protein in adhesion and locomotion of A. proteus. The results of the present paper show similarities to observations on mammalian tissue culture cells.     

Force to Divide: Structural and Mechanical Requirements for Actomyosin Ring Contraction

One of the unresolved questions in the field of cell division is how the actomyosin cytoskeleton remains structurally organized while generating the contractile force to divide one cell into two. In analogy to the actomyosin-based force production mechanism in striated muscle, it was originally proposed that contractile stress in the actomyosin ring is generated via a sliding filament mechanism within an organized sarcomere-like array. However, over the last 30 years, ultrastructural and functional studies have noted important distinctions between cytokinetic structures in dividing cells and muscle sarcomeres. Myosin-II motor activity is not always required, and there is evidence that actin depolymerization contributes to contraction. In this Review, the architecture and contractile dynamics of the actomyosin ring at the cell division plane will be discussed. We will report the interdisciplinary advances in the field as well as their integration into a mechanistic understanding of contraction in cell division and in other biological processes that rely on an actomyosin-based force-generating system.     

Force to Divide: Structural and Mechanical Requirements for Actomyosin Ring Contraction

One of the unresolved questions in the field of cell division is how the actomyosin cytoskeleton remains structurally organized while generating the contractile force to divide one cell into two. In analogy to the actomyosin-based force production mechanism in striated muscle, it was originally proposed that contractile stress in the actomyosin ring is generated via a sliding filament mechanism within an organized sarcomere-like array. However, over the last 30 years, ultrastructural and functional studies have noted important distinctions between cytokinetic structures in dividing cells and muscle sarcomeres. Myosin-II motor activity is not always required, and there is evidence that actin depolymerization contributes to contraction. In this Review, the architecture and contractile dynamics of the actomyosin ring at the cell division plane will be discussed. We will report the interdisciplinary advances in the field as well as their integration into a mechanistic understanding of contraction in cell division and in other biological processes that rely on an actomyosin-based force-generating system.     

Force generated by actomyosin contraction builds bridges between adhesive contacts

Extracellular matrices in vivo are heterogeneous structures containing gaps that cells bridge with an actomyosin network. To understand the basis of bridging, we plated cells on surfaces patterned with fibronectin (FN)‐coated stripes separated by non‐adhesive regions. Bridges developed large tensions where concave cell edges were anchored to FN by adhesion sites. Actomyosin complexes assembled near those sites (both actin and myosin filaments) and moved towards the centre of the non‐adhesive regions in a treadmilling network. Inhibition of myosin‐II (MII) or Rho‐kinase collapsed bridges, whereas extension continued over adhesive areas. Inhibition of actin polymerization (latrunculin‐A, jasplakinolide) also collapsed the actomyosin network. We suggest that MII has distinct functions at different bridge regions: (1) at the concave edges of bridges, MIIA force stimulates actin filament assembly at adhesions and (2) in the body of bridges, myosin cross‐links actin filaments and stimulates actomyosin network healing when breaks occur. Both activities ensure turnover of actin networks needed to maintain stable bridges from one adhesive region to another.     

Analysis of the Actin–Myosin II System in Fish Epidermal Keratocytes: Mechanism of Cell Body Translocation

While the protrusive event of cell locomotion is thought to be driven by actin polymerization, the mechanism of forward translocation of the cell body is unclear. To elucidate the mechanism of cell body translocation, we analyzed the supramolecular organization of the actin–myosin II system and the dynamics of myosin II in fish epidermal keratocytes. In lamellipodia, long actin filaments formed dense networks with numerous free ends in a brushlike manner near the leading edge. Shorter actin filaments often formed T junctions with longer filaments in the brushlike area, suggesting that new filaments could be nucleated at sides of preexisting filaments or linked to them immediately after nucleation. The polarity of actin filaments was almost uniform, with barbed ends forward throughout most of the lamellipodia but mixed in arc-shaped filament bundles at the lamellipodial/cell body boundary. Myosin II formed discrete clusters of bipolar minifilaments in lamellipodia that increased in size and density towards the cell body boundary and colocalized with actin in boundary bundles. Time-lapse observation demonstrated that myosin clusters appeared in the lamellipodia and remained stationary with respect to the substratum in locomoting cells, but they exhibited retrograde flow in cells tethered in epithelioid colonies. Consequently, both in locomoting and stationary cells, myosin clusters approached the cell body boundary, where they became compressed and aligned, resulting in the formation of boundary bundles. In locomoting cells, the compression was associated with forward displacement of myosin features. These data are not consistent with either sarcomeric or polarized transport mechanisms of cell body translocation. We propose that the forward translocation of the cell body and retrograde flow in the lamellipodia are both driven by contraction of an actin–myosin network in the lamellipodial/cell body transition zone.