Influence of compound structure on affinity, sequence selectivity, and mode of binding to DNA for unfused aromatic dications related to furamidine

In the course of a program aimed at developing sequence-specific gene-regulatory small organic molecules, we have investigated the DNA interactions of a new series of nine diphenylfuran dications related to the antiparasitic drug furamidine (DB75). Two types of structural modifications were tested: the terminal amidine groups of DB75 were shifted from the para to the meta position, and the amidines were replaced with imidazoline or dimethyl-imidazoline groups, to test the importance of both the position and nature of positively charged groups on DNA interactions. The interactions of these compounds with DNA and oligonucleotides were studied by a combination of biochemical and biophysical techniques. Absorption and CD measurements suggested that the drugs bind differently to AT and GC sequences in DNA. The para-para dications, like DB75, bind into the minor groove of poly(dAT)(2) and intercalate between the base pairs of poly(dGC)(2), as revealed by electric linear dichroism experiments. In contrast, the meta-meta compounds exhibit a high tendency to intercalate into DNA whatever the target sequence. The lack of sequence selectivity of the meta-meta compounds containing amidines or dimethyl-imidazoline groups was also evident from DNase I footprinting and surface plasmon resonance (SPR) experiments. Accurate binding measurements using the BIAcore SPR method revealed that all nine compounds bind with similar affinity to an immobilized GC sequence DNA hairpin but exhibit very distinct affinities for the corresponding AT hairpin oligonucleotide. The minor groove-binding para-para compounds have a high specificity for AT sequences. The biophysical data clearly indicate that shifting the cationic substituents from the para to the meta position results in a loss of specificity and change in binding mode. The strong AT selectivity of the para-para compounds was independently confirmed by DNase I footprinting experiments performed with a range of DNA restrictions fragments. In terms of AT selectivity, the compounds rank in the order para-para > para-meta > meta-meta. The para dications bind preferentially to sequences containing four contiguous AT base pairs. Additional footprinting experiments with substrates containing the 16 possible [A.T](4) blocks indicated that the presence of a TpA step within an [A.T] (4) block generally reduces the extent of binding. The diverse methods, from footprinting to SPR to dichroism, provide a consistent model for the interactions of the diphenylfuran dications with DNA of different sequences. Altogether, the results attest unequivocally that the binding mode for unfused aromatic cations can change completely depending on substituent position and DNA sequence. These data provide a rationale to explain the relationships between sequence selectivity and mode of binding to DNA for unfused aromatic dications related to furamidine.     

Recognition of ATGA sequences by the unfused aromatic dication DB293 forming stacked dimers in the DNA minor groove

Furamidine and related diamidines represent a promising series of drugs active against widespread parasites, in particular the Pneumocystic carinii pathogen. In this series, the phenylfuranbenzimidazole diamidine derivative DB293 was recently identified as the first unfused aromatic dication capable of forming stacked dimers in the DNA minor groove of GC-containing sequences. Here we present a detailed biochemical and biophysical characterization of the DNA sequence recognition properties of DB293. Three complementary footprinting techniques using DNase I, Fe(II)-EDTA, and an anthraquinone photonuclease were employed to locate binding sites for DB293 in different DNA restriction fragments. Two categories of sites were identified by DNase I footprinting: (i) 4/5 bp sequences containing contiguous A.T pairs, such as 5'-AAAA and 5'-ATTA; and (ii) sequences including the motif 5'-ATGA.5'-TCAT. In particular, a 13-bp sequence including two contiguous ATGA motifs provided a highly preferential recognition site for DB293. Quantitative footprinting analysis revealed better occupancy of the 5'-ATGA site compared to the AT-rich sites. Preferential binding of DB293 to ATGA sites was also observed with other DNA fragments and was confirmed independently by means of hydroxyl radical footprinting generated by the Fe(II)-EDTA system, as well as by a photofootprinting approach using the probe anthraquinone-2-sulfonate (AQS). In addition, this photosensitive reagent revealed the presence of sites of enhanced cutting specific to DB293. This molecule, but not other minor groove binders such as netropsin, induces specific local structural changes in DNA near certain binding sites, as independently shown by DNase I and the AQS probe. Recognition of the ATGA sequence by DB293 was investigated further using melting temperature experiments and surface plasmon resonance (SPR). The use of different hairpin oligonucleotides showed that DB293 can interact with AT sites via the formation of 1:1 drug-DNA complexes but binds much more strongly, and cooperatively, to ATGA-containing sequences to form 2:1 drug-DNA complexes. DB293 binds strongly to ATGA sequences with no significant context dependence but is highly sensitive to the orientation of the target sequence. The formation of 2:1 DB293/DNA complexes is abolished by reversing the sequence 5'-ATGA-->3'-ATGA, indicating that directionality plays an important role in the drug-DNA recognition process. Similarly, a single mutation in the A[T-->G]GA sequence is very detrimental to the dimer interactions of DB293. From the complementary footprinting and SPR data, the 5'-ATGA sequence is identified as being a highly favored dimer binding site for DB293. The data provide clues for delineating a recognition code for diamidine-type minor groove binding agents, and ultimately to guide the rational design of gene regulatory molecules targeted to specific sites of the genetic material.     

Sequence-dependent binding of bis-amidine carbazole dications to DNA.

The conventional wisdom argues that DNA intercalators possess a condensed polyaromatic ring whereas DNA minor groove binders generally contain unfused aromatic heterocycles, frequently separated by amide bonds. Recently, this view has been challenged with the discovery of powerful intercalating agents formed by unfused aromatic molecules and groove binders containing a polyaromatic nucleus. Bis-amidinocarbazoles belong to this later category of drugs having a planar chromophore and capable of reading the genetic information accessible within the minor groove of AT-rich sequences [Tanious, F.A., Ding, D., Patrick, D.A., Bailly, C., Tidwell, R.R. & Wilson, W.D. (2000) Biochemistry 39, 12091-12101]. But in addition to the tight binding to AT sites, we show here that bis-amidinocarbazoles can also interact with GC sites. The extent and mode of binding of 2,7 and 3,6 substituted amidinocarbazoles to AT and GC sequences were investigated by complementary biochemical and biophysical methods. Absorption, fluorescence, melting temperature and surface plasmon resonance (SPR) measurements indicate that the position of the two amidine groups on the carbazole ring influences significantly the drug-DNA interaction. SPR and DNase I footprinting data confirm the AT-preference of the compounds and provide useful information on their additional interaction with GC sequences. The 3,6-carbazole binds approximately twice as strongly to the GC-containing hairpin oligomer than the 2,7-regioisomer. The high tendency of the 3,6 compound to intercalate into different types of DNA containing G.C base pairs is shown by electric linear dichroism. This work completes our understanding of the sequence-dependent DNA binding properties of carbazole dications.     

Nucleotide sequence binding preferences of nogalamycin investigated by DNase I footprinting

Four DNA restriction fragments, designated tyrT, pTyr2, pUC13, and Xbs1, have been used as substrates for footprinting studies with DNase I in the presence of the anthracycline antibiotic nogalamycin. With each fragment a distinct pattern of antibiotic-protected binding sites is observed, but no concensus sequence emerges from the data. All sites are located in regions of alternating purine-pyrimidine sequence, most commonly associated with the dinucleotide steps TpG (CpA) and GpT (ApC), suggesting that the preferred binding sites may contain all four nucleotides and/or that peculiarities of the dynamics of DNA conformation at alternating sequences may be critical for nogalamycin binding. Some concentration dependence of footprinting patterns is evident, in contrast to previous studies with a variety of sequence-specific ligands. Enhanced susceptibility to attack by DNase I is commonly observed at sequences flanking strong antibiotic-binding sites. Nogalamycin selectively inhibits cleavage of DNA at certain guanine-containing sequences by the G-specific photosensitized reaction with methylene blue. Comparison of these effects with its action on the G-specific reaction with dimethyl sulfate suggests that the amino sugar moiety of nogalamycin may be preferentially located in the minor helical groove at some binding sites but in the major groove at others.     

Structural characterization of AtmS13, a putative sugar aminotransferase involved in indolocarbazole AT2433 aminopentose biosynthesis

AT2433 from Actinomadura melliaura is an indolocarbazole antitumor antibiotic structurally distinguished by its unique aminodideoxypentose‐containing disaccharide moiety. The corresponding sugar nucleotide‐based biosynthetic pathway for this unusual sugar derives from comparative genomics where AtmS13 has been suggested as the contributing sugar aminotransferase (SAT). Determination of the AtmS13 X‐ray structure at 1.50‐Å resolution reveals it as a member of the aspartate aminotransferase fold type I (AAT‐I). Structural comparisons of AtmS13 with homologous SATs that act upon similar substrates implicate potential active site residues that contribute to distinctions in sugar C5 (hexose vs. pentose) and/or sugar C2 (deoxy vs. hydroxyl) substrate specificity. Proteins 2015; 83:1547–1554. © 2015 Wiley Periodicals, Inc.     

Molecular determinants for DNA minor groove recognition: design of a bis-guanidinium derivative of ethidium that is highly selective for AT-rich DNA sequences

The phenanthridinium dye ethidium bromide is a prototypical DNA intercalating agent. For decades, this anti-trypanosomal agent has been known to intercalate into nucleic acids, with little preference for particular sequences. Only polydA-polydT tracts are relatively refractory to ethidium intercalation. In an effort to tune the sequence selectivity of known DNA binding agents, we report here the synthesis and detailed characterization of the mode of binding to DNA of a novel ethidium derivative possessing two guanidinium groups at positions 3 and 8. This compound, DB950, binds to DNA much more tightly than ethidium and exhibits distinct DNA-dependent absorption and fluorescence properties. The study of the mode of binding to DNA by means of circular and electric linear dichroism revealed that, unlike ethidium, DB950 forms minor groove complexes with AT sequences. Accurate quantification of binding affinities by surface plasmon resonance using A(n)T(n) hairpin oligomer indicated that the interaction of DB950 is over 10-50 times stronger than that of ethidium and comparable to that of the known minor groove binder furamidine. DB950 interacts weakly with GC sites by intercalation. DNase I footprinting experiments performed with different DNA fragments established that DB950 presents a pronounced selectivity for AT-rich sites, identical with that of furamidine. The replacement of the amino groups of ethidium with guanidinium groups has resulted in a marked gain of both affinity and sequence selectivity. DB950 provides protection against DNase I cleavage at AT-containing sites which frequently correspond to regions of enhanced cleavage in the presence of ethidium. Although DB950 maintains a planar phenanthridinium chromophore, the compound no longer intercalates at AT sites. The guanidinium groups of DB950, just like the amidinium group of furamidine (DB75), are the critical determinants for recognition of AT binding sites in DNA. The chemical modulation of the ethidium exocyclic amines is a profitable option to tune the nucleic acid recognition properties of phenylphenanthridinium dyes.     

Combinatorial determination of sequence specificity for nanomolar DNA-binding hairpin polyamides

Development of sequence-specific DNA-binding drugs is an important pharmacological goal, given the fact that numerous existing DNA-directed chemotherapeutic drugs rely on the strength and selectivity of their DNA interactions for therapeutic activity. Among the DNA-binding antibiotics, hairpin polyamides represent the only class of small molecules that can practically bind any predetermined DNA sequence. DNA recognition by these ligands depends on their side-by-side amino acid pairings in the DNA minor groove. Extensive studies have revealed that these molecules show extremely high affinity for sequence-directed, minor groove interaction. However, the specificity of such interactions in the presence of a large selection of sequences such as the human genome is not known. We used the combinatorial selection method restriction endonuclease protection, selection, and amplification (REPSA) to determine the DNA binding specificity of two hairpin polyamides, ImPyPyPy-gamma-PyPyPyPy-beta-Dp and ImPyPyPy-gamma-ImPyPyPy-beta-Dp, in the presence of more than 134 million different sequences. These were verified by restriction endonuclease protection assays and DNase I footprinting analysis. Our data showed that both hairpin polyamides preferentially selected DNA sequences having consensus recognition sites as defined by the Dervan pairing rules. These consensus sequences were rather degenerate, as expected, given that the stacked pyrrole-pyrrole amino acid pairs present in both polyamides are unable to discriminate between A.T and T.A base pairs. However, no individual sequence within these degenerate consensus sequences was preferentially selected by REPSA, indicating that these hairpin polyamides are truly consensus-specific DNA-binding ligands. We also discovered a preference for overlapping consensus binding sites among the sequences selected by the hairpin polyamide ImPyPyPy-gamma-PyPyPyPy-beta-Dp, and confirmed by DNase I footprinting that these complex sites provide higher binding affinity. These data suggest that multiple hairpin polyamides can cooperatively bind to their highest-affinity sites.     

Effects of a hairpin polyamide on DNA melting: comparison with distamycin and Hoechst 33258

We have used DNase I footprinting and fluorescence melting studies to study the interaction of the hairpin polyamide Im-Py-Py-Py-(R)H2Ngamma-Im-Py-Py-Py-beta-Dp with its preferred binding sites (5'-WGWWCW; W=A or T) and other sequences. DNase I footprinting confirmed that the ligand binds to the sequence AGAACA at nanomolar concentrations and that changing the terminal A to G causes a dramatic decrease in affinity, while there was no interaction with the reverse sequence WCWWGW. Fluorescence melting studies with 11-mer duplexes showed that the polyamide had very different effects on the forward (TGWWCT) and reverse (TCTAGT) sequences. At low concentrations, the polyamide produced biphasic melting curves with TGATCT, TGTACT and TGAACT, suggesting a strong interaction. In contrast, the melting profiles with TCTAGT were always monophasic and showed much smaller concentration dependent changes in Tm. The polyamide also showed weak binding to the sequence TGATCT when one of the central AT pairs was replaced with an AC mismatch. These melting profiles were compared with those produced by the AT-selective minor groove binding agents distamycin and Hoechst 33258 at the same sites and at similar sequences containing A5 and (AT)3, which are expected to bind distamycin in the 1:1 and 2:1 modes, respectively. These ligands produced simple monophasic melting curves in which the Tm steadily increased as the ligand concentration was raised.     

Cooperative dimerization of a heterocyclic diamidine determines sequence-specific DNA recognition

In the course of a program aimed at discovering novel DNA-targeted antiparasitic drugs, the phenylfuran-benzimidazole unfused aromatic dication DB293 was identified as the first diamidine capable of forming stacked dimers in the DNA minor groove of GC-containing sequences. Its preferred binding sequence encompasses the tetranucleotide 5'-ATGA.5'-TCAT to which DB293 binds tightly with a strong positive cooperativity. Here we have investigated the influence of the DNA sequence on drug binding using two complementary technical approaches: surface plasmon resonance and DNase I footprinting. The central dinucleotide of the primary ATGA motif was systematically varied to represent all of the eight possible combinations (AXGA and ATYA, where X or Y = A, T, G, or C). Binding affinities for each site were precisely measured by SPR, and the extent of cooperative drug binding was also determined. The sequence recognition process was found to be extremely dependent on the nature of the central dinucleotide pair. Modification of the central TG step decreases binding affinity by a factor varying from 2 to over 500 depending on the base substitution. However, the diminished binding affinity does not affect the unique binding mode. In nearly all cases, the SPR titrations revealed a positive cooperativity in complex formation which reflects the ease of the dication to form stacked dimeric motifs in the DNA minor groove. DNase I footprinting served to identify additional binding sites for DB293 in the context of long DNA sequences offering a large variety of randomly distributed or specifically designed sites. The ATGA motif provided the best receptor for the drug, but lower affinity sequences were also identified. The design of two DNA fragments composed of various targeted tetranucleotide binding sites separated by an "insulator" (nonbinding) sequence allowed us to delineate further the influence of DNA sequence on drug binding and to identify a novel high-affinity site: 5'-ACAA.5'-TTGT. Collectively, the SPR and footprinting results show that the consensus sequence 5'-(A/T)-TG-(A/T) represents the optimal site for cooperative dimerization of the heterocyclic diamidine DB293.     

DNA sequence recognition by bispyrazinonaphthalimides antitumor agents

Bifunctional DNA intercalating agents have long attracted considerable attention as anticancer agents. One of the lead compounds in this category is the dimeric antitumor drug elinafide, composed of two tricyclic naphthalimide chromophores separated by an aminoalkyl linker chain optimally designed to permit bisintercalation of the drug into DNA. In an effort to optimize the DNA recognition capacity, different series of elinafide analogues have been prepared by extending the surface of the planar drug chromophore which is important for DNA sequence recognition. We report here a detailed investigation of the DNA sequence preference of three tetracyclic monomeric or dimeric pyrazinonaphthalimide derivatives. Melting temperature measurements and surface plasmon resonance (SPR) studies indicate that the dimerization of the tetracyclic planar chromophore considerably augments the affinity of the drug for DNA, polynucleotides, or hairpin oligonucleotides and promotes selective interaction with G.C sites. The (CH(2))(2)NH(CH(2))(3)NH(CH(2))(2) connector stabilizes the drug-DNA complexes. The methylation of the two nitrogen atoms of this linker chain reduces the binding affinity and increases the dissociation rates of the drug-DNA complexes by a factor of 10. DNase I footprinting experiments were used to investigate the sequence selectivity of the drugs, demonstrating highly preferential binding to G.C-rich sequences. It also served to select a high-affinity site encompassing the sequence 5'-GACGGCCAG which was then introduced into a biotin-labeled hairpin oligonucleotide to accurately measure the binding parameters by SPR. The affinity constant of the unmethylated dimer for this sequence is 500 times higher than that of the monomer compound and approximately 10 times higher than that of the methylated dimer. The DNA groove accessibility was also probed with three related oligonucleotides carrying G --> c(7)G, G --> I, and C --> M substitutions. The level of drug binding to the two hairpin oligonucleotides containing 7-deazaguanine (c(7)G) or 5-methylcytosine (M) residues is unchanged or only slightly reduced compared to that of the unmodified target. In contrast, incorporation of inosine (I) residues considerably decreases the extent of drug binding or even abolishes the interaction as is the case with the monomer. The pyrazinonaphthalimide derivatives are thus much more sensitive to the deletion of the exocyclic guanine 2-amino group exposed in the minor groove of the duplex than to the modification of the major groove elements. The complementary SPR footprinting methodology combining site selection and quantitative DNA affinity analysis constitutes a reliable method for dissecting the DNA sequence selectivity profile of reversible DNA binding small molecules.     

Bifunctional intercalator [N-MeCys3,N-MeCys7]TANDEM binds to the dinucleotide TpA.

The binding of [N-MeCys3,N-MeCys7]TANDEM has been examined by DNase I footprinting and diethyl pyrocarbonate modification of several synthetic DNA fragments containing AT-rich regions. DNase I footprinting reveals that at low concentrations the ligand binds preferentially to the center of (AT)n regions. A fragment containing the tetranucleotide AATT was unaffected by the ligand. Diethyl pyrocarbonate modification of several fragments containing blocks of (AT)n revealed a pattern in which alternate adenines were rendered more reactive in the presence of the ligand. These reactive adenines were staggered across the two DNA strands in the 3'-direction, consistent with ligand binding to the dinucleotide TpA. In sequences of the type (TAA)n.(TTA)n, binding of [N-MeCys3,N-MeCys7]TANDEM resulted in strong modification of the second adenine in the sequence TAA, i.e., the base on the 3'-side of the ligand binding site. Data for binding to (AT)n are best explained by suggesting that the adenines sandwiched between the quinoxaline chromophores are rendered most reactive to diethyl pyrocarbonate.     

Sequence selective binding of ditrisarubicin B to DNA: comparison with daunomycin

DNase I footprinting has been used to examine the sequence selective binding of ditrisarubicin B, novel anthracycline antibiotic, to DNA. At 37°C no footprinting pattern is observed, the drug protects all sites from enzymic cleavage with equal efficiency. At 4°C a footprinting pattern is induced with low drug concentrations which is different from that produced by daunomycin. The best binding sites contain the dinucleotide step GpT (ApC) and are located in regions of alternating purines and pyrimidines.     

Footprinting studies of DNA-sequence recognition by nogalamycin.

We have studied the DNA sequence binding preference of the antitumour antibiotic nogalamycin by DNase-I footprinting using a variety of DNA fragments. The DNA fragments were obtained by cloning synthetic oligonucleotides into longer DNA fragments and were designed to contain isolated ligand-binding sites surrounded by repetitive sequences such as (A)n.(T)n and (AT)n. Within regions of (A)n.(T)n, clear footprints are observed with low concentrations of nogalamycin (< 5 microM), with apparent binding affinities for tetranucleotide sequences which decrease in the order TGCA > AGCT = ACGT > TCGA. In contrast, within regions of (AT)n, the ligand binds best to AGCT; binding to TCGA and TGCA is no stronger than to alternating AT. Within (ATT)n, the preference is for ACGT > TCGA. Although each of these binding sites contains all four base pairs, there is no apparent consensus sequence, suggesting that the selectivity is affected by local DNA dynamic and structural effects. At higher drug concentrations (> 25 microM), nogalamycin prevents DNAse-I cleavage of (AT)n but shows no interaction with regions of (AC)n.(GT)n. Regions of (A)n.(T)n, which are poorly cut by DNase I, show enhanced rates of cleavage in the presence of low concentrations of nogalamycin, but are protected from cleavage at higher concentrations. We suggest that this arises because drug binding to adjacent regions distorts the DNA to a structure which is more readily cut by the enzyme and which is better able to bind further ligand molecules.     

Effects of length and position of an extended linker on sequence-selective DNA recognition of zinc finger peptides

Engineered zinc finger proteins revealed that a linker sequence connecting zinc finger units has a significant effect on the DNA binding property of the protein. The recognition for a noncontiguous DNA target beyond the current recognition code of zinc finger proteins has never been determined because of the limitation of a zinc finger framework. DNA recognition of zinc finger proteins is limited only to a contiguous subset of three base pairs. We propose the recognition for a noncontiguous DNA target by inserting amino acids into the canonical linker between zinc finger units. The sequence selectivity of the new zinc finger peptides was evaluated by gel mobility shift assays. DNase I footprinting analyses clearly showed different DNA binding of various linker-extended zinc finger peptides. The application of a SPR measurement also revealed a DNA sequence selectivity of peptides. Insertion of three amino acids is enough for recognition of a noncontiguous DNA target with sequence selectivity. An extended linker will be useful for expansion of the recognition code of zinc finger proteins and for development of a new role for linker sequences in DNA binding of zinc finger proteins.     

Alternative heterocycles for DNA recognition: a 3-pyrazole/pyrrole pair specifies for G.C base pairs

Synthetic ligands comprising three aromatic amino acids, pyrrole (Py), imidazole (Im), and hydroxypyrrole (Hp), specifically recognize predetermined sequences as side-by-side pairs in the minor groove of DNA. To expand the repertoire of aromatic rings that may be utilized for minor groove recognition, three five-membered heterocyclic rings, 3-pyrazolecarboxylic acid (3-Pz), 4-pyrazolecarboxylic acid (4-Pz), and furan-2-carboxylic acid (Fr), were examined at the N-terminus of eight-ring hairpin polyamide ligands. The DNA binding properties of 3-Pz, 4-Pz, and Fr each paired with Py were studied by quantitative DNase I footprinting titrations on a 283 bp DNA restriction fragment containing four 6-bp binding sites 5'-ATNCCTAA-3' (N = G, C, A, or T; 6-bp polyamide binding site is underlined). The pair 3-Pz/Py has increased binding affinity and sequence specificity for G.C bp compared with Im/Py.     

Sequence-selective, pH-dependent binding to DNA of benzophenanthridine alkaloids

The sequence selectivity associated with binding to DNA of three alkaloids belonging to the benzophenanthridine family has been analysed by DNase I footprinting, and the results were compared with those obtained from an analysis of the behaviour of the standard intercalator, ethidium bromide. Like the ethidium, the benzophenanthridine compounds appear to bind best to regions of mixed nucleotide sequence, especially those containing alternating purines and pyrimidines, although there are some notable differences in behaviour. There is also a marked lack of binding to sequences such as (AT)n, where n greater than or equal to 3. The binding to DNA of the benzophenanthridines is specifically related to the hydrogen ion concentration of the medium, in that the DNase I footprints are considerably enhanced when the reaction is performed at a pH below 7.0. We discuss these results in terms of a greater preponderance of the intercalating species being present at lower pH.     

Determination of equilibrium binding affinity of distamycin and netropsin to the synthetic deoxyoligonucleotide sequence d(GGTATACC)2 by quantitative DNase I footprinting

A new method for determining the equilibrium binding constant of antitumor drugs to specific DNA sequences by quantitative DNase I footprinting is presented. The use of a short synthetic DNA oligomer to define a homogeneous population of DNA binding sites enables the calculation of the free drug concentration and the fraction of DNA sites complexed with drug in solution and is described for the first time. Since a 1:1 stoichiometry is observed for each drug-oligomer DNA complex, it becomes possible to calculate equilibrium binding constants in solution. By use of this technique, the binding affinities of the nonintercalating drugs netropsin and distamycin to the synthetic oligonucleotide d(GGTATACC)2 are determined to be Ka (25 degrees C) = 1.0 X 10(5) and 2.0 X 10(5) M-1, respectively. Quantitation of the temperature dependence associated with complex formation results in a determination of standard enthalpies of -3.75 and -8.48 kcal mol-1 for the binding of netropsin and distamycin, respectively. Calculation of other thermodynamic parameters are found to be in agreement with previous studies and indicate that the DNA binding process for these compounds is predominantly enthalpy driven. This method of quantitative DNase I footprinting is demonstrated to be a useful technique for the measurement of drug affinities to specific binding sites on DNA oligomers which are designed and synthesized expressly for this purpose. Applications of the technique to the determination of drug binding affinities at specific sites within native DNA sequences are discussed.     

Specific protection of DNA by distamycin A, netropsin and bis-netropsins against the action of DNAse I

Interaction of netropsin, distamycin A and a number of bis-netropsins with DNA fragments of definite nucleotide sequence was studied by footprinting technique. The nuclease protection experiments were made at fixed DNA concentration and varying ligand concentrations. The affinity of ligand for a DNA site was estimated from measurements of ligand concentration that causes 50% protection of the DNA site. Distribution pattern of the protected and unprotected regions along the DNA fragment was compared with the theoretically expected arrangement of the ligand along the same DNA. The comparison led us to the following conclusions: 1. Footprinting experiments show that at high levels of binding the arrangement of netropsin molecules along the DNA corresponds closely to the distribution pattern expected from theoretical calculations based on the known geometry of netropsin--DNA complex. However, the observed differences in the affinity of netropsin for various DNA sequences is markedly greater than that expected from theoretical calculations. 2. Netropsin exhibits a greater selectivity of binding than that expected for a ligand with three specific reaction centers associated with the antibiotic amide groups. It binds preferentially to DNA regions containing four or more successive AT pairs. Among 13 putative binding sites for netropsin with four or more successive AT pairs there are 11 strong binding sites and two weaker sites which are occupied at 2 D/P less than or equal to 1/9 and 2 D/P = 1/4, respectively. 3. The extent of specificity manifested by distamycin A is comparable to that shown by netropsin although the molecule of distamycin A contains four rather than three amide groups. At high levels of binding distamycin A occupies the same binding sites on DNA as netropsin does. 4. The binding specificity of bis-netropsins is greater than that of netropsin. Bis-netropsins can bind to DNA in such a way that the two netropsin-like fragments are implicated in specific interaction with DNA base pairs. However, the apparent affinity of bis-netropsins estimated from footprinting experiments is comparable with that of netropsin for the same DNA region. 5. At high levels of binding bis-netropsins and distamycin A (but not netropsin) can occupy any potential site on DNA irrespectively of the DNA sequence. 6. Complex formation with netropsin increases sensitivity to DNase I at certain DNA sites along with the protection effect observed at neighboring sites.     

Biosensor detection of triplex formation by modified oligonucleotides

Due to the instability of DNA oligonucleotides in biological solutions, antisense or antigene therapies aimed at modulation of specific gene expression will most likely require the use of oligonucleotides with modified backbones. Here, we examine the use of a surface plasmon resonance biosensor (BIAcore) to compare triplex-directed binding of modified oligonucleotides targeted to a region of the murine c-myc promoter. We describe optimization of experimental conditions to minimize nonspecific interactions between the oligonucleotides and the sensor chip surface, and the limitations imposed by certain backbones and sequence types. The abilities of pyrimidine oligonucleotides with various modified backbones to form specific triple helices with an immobilized hairpin duplex were readily determined using the biosensor. Modification of the third-strand oligonucleotide with RNA or 2(')-O-methyl RNA was found to enhance triplex formation, whereas phosphorothioate or phosphotriester substitutions abrogated it. A comparison of these results to DNase I footprinting experiments using the same oligonucleotides showed complete agreement between the two sets of data.