Effects of ion exchange capacities on attachment and growth of anchorage-dependent HeLa cell

An effect of ion exchange capacity of petri dish on cell attachment and growth of an anchorage-dependent animal cell was studied. We proposed a new idea to analyze cell attachment kinetics. As the experimental result of cell attachment to a petri dish, the attachment rate constant and the maximum number of attached cells both increase with increasing the ion exchange capacity. However, no direct correlation between the ion exchange capacity and the cell growth was observed. An influence of ion exchange capacity on the cell growth of initially attached cells onto the petri dish with different ion exchange capacities was examined. The specific growth rate of initially attached cells decreased with increasing the ion exchange capacity. The detrimental effect of the ion exchange capacity on the specific growth rate of the initially attached cells exists during the cell cultivation period. In the ion exchange capacity of 27 meq/m², the specific growth rate drastically decreased. It is considered that there is optimum value of the ion exchange capacity for the cell growth and attachment. It is concluded that the optimum ion exchange capacity is 18 meq/m².     

Kinetics of cellular adhesion to different materials used in implants

The authors expose their observations about the kinetics of cell adesion on two materials used as implants in orthopaedic surgery, AISI, 316 L steel and passivated titanium. The kinetics of cell attachment have been compared: an initial rapid increase of bound radioactivity was observed on passivated titanium (in 5 - 30 min) and after this rapid reaction the number of attached cells increased only slowly, during the following 30 min. After incubation of 90 min, almost all cells became attached. Kinetic of BHK cell attachment on AISI 316 L differs significantly: almost all added cells were attached in 90 min but the rapid increase of attachment is observed only during the first 30 min. These observations are important for the comprension of adhesion mechanisms and characterize the properties of biocompatibility of implant materials.     

Cooling rate dependent biophysical and viability response shift with attachment state in human dermal fibroblast cells

While studies on the freezing of cells in suspension have been carried out extensively, corresponding studies with cells in the attached state and in tissue or tissue-equivalents are less developed. As attachment is a hallmark of the tissue state it is important to understand its impact on biophysics and viability to better apply freezing towards tissue preservation. The current study reports on observed biophysical response changes observed during freezing human dermal fibroblasts in suspension, attached cell, and fibrin tissue-equivalent models. Specifically, intracellular ice formation is shown to increase and dehydration is inferred to increase from suspension to attached systems. Biophysical model parameters fit to these experimental observations reflect the higher kinetics in the attached state. Post-thaw viability values from fast cooling rates were higher for suspension systems, and correlated well with the amount of IIF observed. On the other hand, viability values from slow cooling rates were higher for attached systems, although the degree of dehydration was predicted to be comparable to suspension cells. This disconnect between biophysics and viability predictions at slow rates clearly requires further investigation as it runs counter to our current understanding of dehydration injury in cells. This may suggest a possible protective effect of the attachment state on cell systems.     

Behavior ofPseudomonas fluorescens within the hydrodynamic boundary layers of surface microenvironments

Phase, darkfield, and computer-enhanced microscopy were used to observe the surface microenvironment of flow cells during bacterial colonization. Microbial behavior was consistent with the assumptions used previously to derive surface colonization kinetics and to calculate surface growth and attachment rates from cell number and distribution. Surface microcolonies consisted of closely packed cells. Each colony contained 2ⁿ cells, where n is the number of cell divisions following attachment. Initially, cells were freely motile while attached, performing circular looping movements within the plane of the solid-liquid interface. Subsequently, cells attached apically, maintained a fixed position on the surface, and rotated. This type of attachment was reversible and did not necessarily lead to the formation of microcolonies. Cells became irreversibly attached by progressing from apical to longitudinal attachment. Longitudinally attached cells increased in length, then divided, separated, moved apart laterally, and slid next to one another. This resulted in tight cell packing and permitted simultaneous growth and adherence. After approximately 4 generations, individual cells emigrated from developing microcolonies to recolonize the surface at new locations. Surface colonization byPseudomonas fluorescens can thus be subdivided into the following sequential colonization phases: motile attachment phase, reversible attachment phase, irreversible attachment phase, growth phase, and recolonization phase.     

Cooling rate dependent biophysical and viability response shift with attachment state in human dermal fibroblast cells

While studies on the freezing of cells in suspension have been carried out extensively, corresponding studies with cells in the attached state and in tissue or tissue-equivalents are less developed. As attachment is a hallmark of the tissue state it is important to understand its impact on biophysics and viability to better apply freezing towards tissue preservation. The current study reports on observed biophysical response changes observed during freezing human dermal fibroblasts in suspension, attached cell, and fibrin tissue-equivalent models. Specifically, intracellular ice formation is shown to increase and dehydration is inferred to increase from suspension to attached systems. Biophysical model parameters fit to these experimental observations reflect the higher kinetics in the attached state. Post-thaw viability values from fast cooling rates were higher for suspension systems, and correlated well with the amount of IIF observed. On the other hand, viability values from slow cooling rates were higher for attached systems, although the degree of dehydration was predicted to be comparable to suspension cells. This disconnect between biophysics and viability predictions at slow rates clearly requires further investigation as it runs counter to our current understanding of dehydration injury in cells. This may suggest a possible protective effect of the attachment state on cell systems.     

Interaction of Bdellovibrio bacteriovorus and Host Bacteria I. Kinetic Studies of Attachment and Invasion of Escherichia coli B by Bdellovibrio bacteriovorus

Quantitative methods were developed for the study of the early stages in the interaction of Bdellovibrio bacteriovorus and host bacteria. Attachment measurements were based on the differential filtration of host and parasite. Invasion was measured by estimation of radioactively labeled Bdellovibrio cells remaining attached to the host cells after mechanical agitation. The kinetics of attachment and the final number of Bdellovibrio cells attached were dependent on the multiplicity of the parasite, the composition and pH of the medium, and the incubation temperature. Inhibitors of Bdellovibrio motility, including chelating agents, NaN(3), and low pH, all inhibited attachment, as did anaerobiosis. Ultraviolet-killed host cells retained their competence for attachment of Bdellovibrio cells, whereas heat-killed cells lost it. Invasion was selectively inhibited by inhibitors of protein synthesis, such as streptomycin, puromycin, and chloramphenicol. These antibiotics had no effect on attachment.     

Studies on cell adhesion and recognition. II. The kinetics of cell adhesion and cell spreading on surfaces coated with carbohydrate- reactive proteins (glycosidases and lectins) and fibronectin

The kinetics of cell attachment and cell spreading on the coated surfaces of two classes of carbohydrate-reactive proteins, enzymes and lectins, have been compared with those on fibronectin-coated surfaces with the following results: (a) A remarkable similarity between the kinetics of cell attachment to fibronectin-coated and glycosidase- coated surfaces was found. In contrast, cell attachment kinetics induced by lectin- and galactose oxidase-coated surfaces, in general, were strikingly different from those on fibronectin and glycosidase surfaces. The distinction between fibronectin- or glycosidase- and lectin- or galactose oxidase (an enzyme with lectin-type characteristics)-coated surfaces was further supported by the finding that cytochalasin B and EDTA inhibited cell attachment to fibronectin- and glycosidase-coated surfaces but not lectin-coated surfaces. (b) Fibronectin, if labeled and added to a cell suspension, showed only low or negligible interaction with the cell surface. However, fibronectin absorbed on plastic surfaces showed a high cell-attaching activity. It is assumed that fibronectin coated on plastic surfaces may form polyvalent attachment sites in contrast to its lower valency in aqueous solution. (c) Various inhibitors of cell attachment to both fibronectin- , galactose oxidase-, and lectin-coated surfaces were effective only during the first few minutes of the adhesion assay, after which time the attached cells became insensitive to the inhibitors. It is suggested that the initial specific recognition on either lectin-type or fibronectin-type surfaces is followed by an active cell-dependent attachment process. The primary role of the adhesion surface is to stimulate the cell-dependent attachment response. (d) Cells attached on tetravalent concanavalin A (Con A) spread very rapidly and quantitatively, whereas divalent succinyl Con A and monovalent Con A were effective stimulators of cell attachment but not cell spreading. Cross-linking of succinyl Con A restored the cell spreading activity. Tetravalent Con A surfaces specifically bind soluble glycoproteins, whereas succinyl Con A has a greatly reduced ability to bind the same glycoproteins. These results suggest that cross-linking of cell surface glycoproteins by the multivalent adhesive surface may trigger the cellular reaction leading to cell spreading.     

Bacterial adhesion to hydroxyl- and methyl-terminated alkanethiol self-assembled monolayers.

The attachment of bacteria to solid surfaces is influenced by substratum chemistry, but to determine the mechanistic basis of this relationship, homogeneous, well-defined substrata are required. Self-assembled monolayers (SAMs) were constructed from alkanethiols to produce a range of substrata with different exposed functional groups, i.e., methyl and hydroxyl groups and a series of mixtures of the two. Percentages of hydroxyl groups in the SAMs and substratum wettability were measured by X-ray photoelectron spectroscopy and contact angles of water and hexadecane, respectively. SAMs exhibited various substratum compositions and wettabilities, ranging from hydrophilic, hydroxyl-terminated monolayers to hydrophobic, methyl-terminated monolayers. The kinetics of attachment of an estuarine bacterium to these surfaces in a laminar flow chamber were measured over periods of 120 min. The initial rate of net adhesion, the number of cells attached after 120 min, the percentage of attached cells that adsorbed or desorbed between successive measurements, and the residence times of attached cells were quantified by phase-contrast microscopy and digital image processing. The greatest numbers of attached cells occurred on hydrophobic surfaces, because (i) the initial rates of adhesion and the mean numbers of cells that attached after 120 min increased with the methyl content of the SAM and the contact angle of water and (ii) the percentage of cells that desorbed between successive measurements (ca. 2 min) decreased with increasing substratum hydrophobicity. With all surfaces, 60 to 80% of the cells that desorbed during the 120-min exposure period had residence times of less than 10 min, suggesting that establishment of firm adhesion occurred quickly on all of the test surfaces.     

Modulation by centrifugation of cell susceptibility to chlamydial infection.

Enhancement of chlamydial infection of cell monolayers by centrifugation was shown to depend on induced cell surface changes. Evidence for this came from analysis of two forms of organism attachment which take place during centrifugation. In 'productive binding', organisms attached to cells and then entered and infected them. In 'unproductive binding', organisms became attached to cells but were not ingested. These organisms could be stripped from the cells by treatment with trypsin and could then infect fresh monolayers. Measurement of attachment kinetics during centrifugation showed that cells passed through three different susceptibility states. Only productive binding occurred in the first 20 min; cells then entered a refractory state during which no attachment took place At about 45 min, attachment recommenced but this allowed only unproductive binding. Induced movement of cell surface structures may enhance infection by promoting specific or non-specific interactions. Failure of ingestion may result from insufficient cell 'receptors' for circumferential binding of the whole chlamydial surface so that engulfment cannot take place.     

Growth of animal cells on microbeads. II. Estimation of biomass in situ and observation of cytopathic effects after infection of McCoy cells with Chlamydia trachomatis

The Channelyzer C256 together with the ZB Coulter Counter have been used to study in situ the growth kinetics of McCoy cells attached on Cytodex 3 microbeads. The number of cells per microbead varied linearly with the average size of the covered microbeads, showing that electronic particle sizing can be used to measure biomass or cell numbers. As the cells became confluent, an increase in cell volume with little accompanying increase in cell number was detected. The technique also enables the experimenter to follow in situ the development of cytopathic effects resulting from the infection by pathogens such as Chlamydia trachomatis serotype L1.     

Bioleaching of zinc sulfide concentrate by Thiobacillus ferrooxidans

The kinetics of the bioleaching of ZnS concentrate by Thiobacillus ferrooxidans was studied in a well-mixed batch reactor. Experimental studies were made at 30 degrees C and pH 2.2 on adsorption of the bacteria to the mineral, ferric iron leaching, and bacterial leaching. The adsorption rate of the bacteria was fairly rapid in comparison with the bioleaching rate, indicating that the bacterial adsorption is at equilibrium during the leaching process. The adsorption equilibrium data were correlated by the Langmuir isotherm, which is a useful means for predicting the number of bacteria adsorbed on the mineral surface. The rate of chemical leaching varied with the concentration of ferric iron, and the first-order reaction rate constant was determined. Bioleaching in an iron-containing medium was found to take place by both direct bacterial attack on the sulfide mineral and indirect attack via ferric iron. In this case, the ferric iron was formed from the reaction product (ferrous iron) through the biological oxidation reaction. To develop rate expressions for the kinetics of bacterial growth and zinc leaching, the two bacterial actions were considered. The key parameters appearing in the rate equations, the growth yield and specific growth rate of adsorbed bacteria, were evaluated by curve fitting using the experimental data. This kinetic model allowed us to predict the liquid-phase concentrations of the leached zinc and free cells during the batch bioleaching process.     

Solubilization and speciation of iron during pyrite oxidation by Thiobacillus ferrooxidans

Various species of soluble iron in pyrite‐grown cultures of Thiobacillus ferrooxidans were determined by colorimetry, atomic absorption spectrometry, and ultraviolet spectroscopy. All the cultures were incubated for six weeks before iron analysis. The effects of the following factors were investigated: particle size, initial pH, shaking (aeration), concentration of pyrite, and concentration of yeast extract. Shaking, but not initial pH nor particle size, influenced the relative proportion of different iron species. Polynomial regressions could be used to describe the functional relationship between the different iron species and concentration of pyrite; fewer relationships were evident with respect to concentration of yeast extract. The variance‐covariance matrices indicated a linear dependence among the different iron species. Canonical correlations indicated perfect correlations between group variables of iron, copper, and zinc, with the exception of an absence of significant correlation with the hydroxy complex of iron (FeOH²⁺).

The dissolved ferrous iron (dissociated and weakly chelated) always remained less than 7% of the total iron in solution. The total ferrous iron, which included complexed species, amounted to 7–34% of the total iron in solution. The concentrations of dissociated ferrous and ferric iron and their weak chelates (the dissolved iron) remained mostly constant, irrespective of the concentration of the total iron in solution. Most of the total iron was complexed as ferric species and the amount correlated with culture conditions. The hydroxy complex (FeOH²⁺), which was indicative of the relative amount of hydrolyzable ferric iron upon dilution in CO₂‐free water, usually ranged between 60 and 80% of the total iron. The amount of the total iron in uninoculated controls was less than 12% of that solu‐bilized in the presence of iron‐oxidizing thiobacilli.

T. ferrooxidans was enumerated by a most‐probable‐number technique after three and six weeks of growth on pyrite. The counts after three weeks indicated an increase in the number of free and loosely attached bacteria, followed by a decline of about one order of magnitude in bacterial numbers after six weeks. The technique for bacterial enumeration was deemed unsatisfactory because it could not account for cells attached on pyrite.     

Coupling of ferric iron spin and allosteric equilibrium in hemoglobin.

The allosteric transition in triply ferric hemoglobin has been studied with different ferric ligands. This valency hybrid permits observation of oxygen or CO binding properties to the single ferrous subunit, whereas the liganded state of the other three ferric subunits can be varied. The ferric hemoglobin (Hb) tetramer in the absence of effectors is generally in the high oxygen affinity (R) state; addition of inositol hexaphosphate induces a transition towards the deoxy (T) conformation. The fraction of T-state formed depends on the ferric ligand and is correlated with the spin state of the ferric iron complexes. High-spin ferric ligands such as water or fluoride show the most T-state, whereas low-spin ligands such as cyanide show the least. The oxygen equilibrium data and kinetics of CO recombination indicate that the allosteric equilibrium can be treated in a fashion analogous to the two-state model. The binding of a low-spin ferric ligand induces a change in the allosteric equilibrium towards the R-state by about a factor of 150 (at pH 6.5), similar to that of the ferrous ligands oxygen or CO; however, each high-spin ferric ligand induces a T to R shift by a factor of 40.     

Spreading of non-transformed and transformed cells

Mechanisms of cellular reactions responsible for the spreading non-transformed cultured tissue cells on the surface of various substrata and relationships of these reactions to the control of cell proliferation are reviewed; the special role of the membrane-cystoskeleton interactions leading to extension and attachment of psuedopods is stressed.Transition of cells from non-transformed to transformed phenotype is characterized by decreased spreading and by decreased dependence of proliferation on spreading. Manifestations of both of these spreading-associated changes are reviewed and their possible mechanisms are discussed. It is suggested that cell transition to transformed phenotype involves shift of an equilibrium between the reactions induced by the two groups of membrane-bound ligands: those attached and those not attached to the substratum.     

Spreading of non-transformed and transformed cells

Mechanisms of cellular reactions responsible for the spreading of non-transformed cultured tissue cells on the surface of various substrata and relationships of these reactions to the control of cell proliferation are reviewed; the special role of the membrane-cytoskeleton interactions leading to extension and attachment of pseudopods is stressed. Transition of cells from non-transformed to transformed phenotype is characterized by decreased spreading and by decreased dependence of proliferation on spreading. Manifestations of both of these spreading-associated changes are reviewed and their possible mechanisms are discussed. It is suggested that cell transition to transformed phenotype involves shift of an equilibrium between the reactions induced by the two groups of membrane-bound ligands: those attached and those not attached to the substratum.     

Process of Infection with Bacteriophage φX174: XXXIV. Kinetics of the Attachment and Eclipse Steps of the Infection

The products of phiX cistrons II, III, and VII are demonstrated to affect the attachment of the phage to its host Escherichia coli C; therefore, by inference, these cistrons influence, directly or indirectly, the structure of proteins in the virus particle. Two of the mutations which alter attachment kinetics, ts79 in cistron III and h in cistron VII, also affect the electrophoretic mobility of the virus and emphasize the role of charge in the attachment interaction with the host. The kinetics for attached phage to go into "eclipse" are first-order and biphasic; about 85% of the phage eclipse at one rate (k(e) = 0.86 min(-1)) and the remainder do so at a distinctly lower rate (k(e) = 0.21 min(-1)). No phiX cistrons yet identified affect the eclipse process. The lowest temperature at which eclipse is detected is 19 C. The Arrhenius activation energy for phage eclipse has the high value of 36.6 kcal/mole, indicating the cooperative nature of the event.     

Endothelial nanoparticle binding kinetics are matrix and size dependent

Nanoparticles are increasingly important in medical research for application to areas such as drug delivery and imaging. Understanding the interactions of nanoparticles with cells in physiologically relevant environments is vital for their acceptance, and cell–particle interactions likely vary based on the design of the particle including its size, shape, and surface chemistry. For this reason, the kinetic interactions of fluorescent nanoparticles of sizes 20, 100, 200, and 500 nm with human umbilical vein endothelial cells (HUVEC) were determined by (1) measuring nanoparticles per cell at 37 and 4°C (to inhibit endocytosis) and (2) modeling experimental particle uptake data with equations describing particle attachment, detachment, and internalization. Additionally, the influence of cell substrate compliance on nanoparticle attachment and uptake was investigated. Results show that the number of binding sites per cell decreased with increasing nanoparticle size, while the attachment coefficient increased. By comparing HUVEC grown on either a thin coating of collagen or on top of three‐dimensional collagen hydrogel, nanoparticle attachment and internalization were shown to be influenced significantly by the substrate on which the cells are cultured. This study concludes that both particle size and cell culture substrate compliance appreciably influence the binding of nanoparticles; important factors in translating in vitro studies of nanoparticle interactions to in vivo studies focused on therapeutic or diagnostic applications. Biotechnol. Bioeng. 2011;108: 2988–2998. © 2011 Wiley Periodicals, Inc.     

Attachment of marine sponge cells of Hymeniacidon perleve on microcarriers

Toward the development of an in vitro cultivation of marine sponge cells for sustainable production of bioactive metabolites, the attachment characteristics of marine sponge cells of Hymeniacidon perleve on three types of microcarriers, Hillex, Cytodex 3, and glass beads, were studied. Mixed cell population and enriched cell fractions of specific cell types by Ficoll gradient centrifugation (6%/8%/15%/20%) were also assessed. Cell attachment ratio (defined as the ratio of cells attached on microcarrier to the total number of cells in the culture) on glass beads is much higher than that on Cytodex 3 and Hillex for both mixed cell population and cell fraction at Ficoll 15-20% interface. The highest attachment ratio of 41% was obtained for the cell fraction at Ficoll 15-20% interface on glass beads, which was significantly higher than that of a mixed cell population (18%). The attachment kinetics on glass beads indicated that the attachment was completed within 1 h. Cell attachment ratio decreases with increase in cell-to-microcarrier ratio (3-30 cells/bead) and pH (7.6-9.0). The addition of serum and BSA (bovine serum albumin) reduced the cell attachment on glass beads.     

Magnetic targeting of mechanosensors in bone cells for tissue engineering applications

Mechanical signalling plays a pivotal role in maintaining bone cell function and remodelling of the skeleton. Our previous work has highlighted the potential role of mechano-induction in tissue engineering applications. In particular, we have highlighted the potential for using magnetic particle techniques for tissue engineering applications. Previous studies have shown that manipulation of integrin attached magnetic particles leads to changes in intracellular calcium signalling within osteoblasts. However, due to the phenomenon of particle internalisation, previous studies have typically focused on short-term stimulation experiments performed within 1-2 h of particle attachment. For tissue engineering applications, bone tissue growth occurs over a period of 3-5 weeks. To date, no study has investigated the cellular responses elicited from osteoblasts over time following stimulation with internalised magnetic particles. Here, we demonstrate the long-term biocompatibility of 4.5 microm RGD-coated particles with osteoblasts up to 21 days in culture, and detail a time course of responses elicited from osteoblasts following mechanical stimulation with integrin attached magnetic particles (<2h post attachment) and internalised particles (>48h post attachment). Mechanical manipulation of both integrin attached and internalised particles were found to induce intracellular calcium signalling. It is concluded that magnetic particles offer a tool for applying controlled mechanical forces to osteoblasts, and can be used to stimulate intracellular calcium signalling over prolonged periods of time. Magnetic particle technology presents a potentially valuable tool for tissue engineering which permits the delivery of highly localised mechano-inductive forces directly to cells.     

Magnesium-dependent attachment and neurite outgrowth by PC12 cells on collagen and laminin substrata

We report a study of the substratum and medium requirements for attachment and neurite outgrowth by cells of the pheochromocytoma-derived PC12 line. In attachment medium containing both Ca2+ and Mg2+, more than 50% of cells attached within 1 hr to petri dishes coated with native collagen Types I/III or II, native or denatured collagen Type IV, laminin, wheat germ agglutinin (WGA), or poly-L-lysine; attachment to dishes coated with nerve growth factor (NGF) was only about 20% and attachment to uncoated dishes or to dishes coated with fibronectin or gelatin was almost nil. Neither prior culturing in the presence of NGF nor addition of NGF to the attachment medium significantly affected the extent of attachment to collagen or laminin. With Ca2+ (1 mM) as the sole divalent cation, cells attached normally to WGA, polylysine, and NGF, but failed to attach to collagen or laminin. With Mg2+ (1 mM) as the only divalent cation, attachment to all substrata was about the same as in medium with both Ca2+ and Mg2+. Like the ionic requirements, the kinetics of attachment, insensitivity to protease treatment of the cells, and inhibition by low temperature and sodium azide were similar for PC12 attachment to collagen and laminin, suggesting that a common molecular mechanism may underlie attachment to these substrata. The only significant difference observed was that addition of WGA (30 micrograms/ml) to the attachment medium inhibited attachment to collagen but promoted attachment to laminin. Finally, PC12 cells extended neurites on laminin, on native collagens I/III, II, and IV, and on denatured collagen IV; they did not extend neurites on denatured collagens I/III or II, NGF, or WGA. Neurite outgrowth on collagen and laminin occurred with Mg2+ as the sole divalent cation. These results suggest that the same Mg2+-dependent adhesion mechanism operates at the cell body and at the growth cone.