Mutation detection by pyrosequencing: sequencing of exons 5-8 of the p53 tumor suppressor gene

The ability to sequence a large number of DNA samples rapidly and accurately for detection of all possible mutations is a critical goal for the future application of DNA sequencing in routine medical diagnostics. Pyrosequencing() is a non-electrophoretic real-time DNA sequencing method that uses the luciferase-luciferin light release as the detection signal for nucleotide incorporation into target DNA. For pyrosequencing of the human p53 gene, a nested multiplex PCR method for amplification of exons 5-8 was prepared. In order to investigate the use of pyrosequencing in mutation detection, DNA samples from skin-cancer patients were used. Two forms of nucleotide dispensation strategy were used, cyclic and programmed. Bi-directional pyrosequencing was performed and the overlapping sequence data produced were assembled to determine the sequence of the gene. Reliable sequencing data were obtained with both dispensation strategies, but some advantages were obtained using the programmed nucleotide dispensation approach, such as longer and faster reads, and fewer out-of-phase problems. The accuracy of pyrosequencing for detection of p53 mutations and allele distribution was demonstrated.     

Pyrosequencing protocol using a universal biotinylated primer for mutation detection and SNP genotyping

DNA sequencing has markedly changed the nature of biomedical research, identifying millions of polymorphisms along the human genome that now require further analysis to study the genetic basis of human diseases. Among the DNA-sequencing platforms available, Pyrosequencing has become a useful tool for medium-throughput single nucleotide polymorphism (SNP) genotyping, mutation detection, copy-number studies and DNA methylation analysis. Its 96-well genotyping format allows reliable results to be obtained at reasonable costs in a few minutes. However, a specific biotinylated primer is usually required for each SNP under study to allow the capture of single-stranded DNA template for the Pyrosequencing assay. Here, we present an alternative to the standard labeling of PCR products for analysis by Pyrosequencing that circumvents the requirement of specific biotinylated primers for each SNP of interest. This protocol uses a single biotinylated primer that is simultaneously incorporated into all M13-tagged PCR products during the amplification reaction. The protocol covers all steps from the PCR amplification and capture of single-stranded template, its preparation, and the Pyrosequencing assay itself. Once the correct primer stoichiometry has been determined, the assay takes around 2 h for PCR amplification, followed by 15-20 min (per plate) to obtain the genotypes.     

Methodological improvements of pyrosequencing technology

Pyrosequencing technology is a rather novel DNA sequencing method based on the sequencing-by-synthesis principle. This bioluminometric, real-time DNA sequencing technique employs a cascade of four enzymatic reactions producing sequence peak signals. The method has been proven highly suitable for single nucleotide polymorphism analysis and sequencing of short stretches of DNA. Although the pyrosequencing procedure is relatively straightforward, users may face challenges due to varying parameters in PCR and sequencing primer design, sample preparation and nucleotide dispensation; such challenges are labor and cost intensive. In this study, these issues have been addressed to increase signal quality and assure sequence accuracy.     

鸭圆环病毒与鸭Ⅰ型肝炎病毒二重 PCR 检测方法的建立

目的：建立一种同时检测鸭圆环病毒（DuCV）和鸭I型肝炎病毒（DHV）病原体的二重PCR技术。方法：根据DuCV和DHV的基因文库,分别设计了2对与DuCV和DHV某段基因序列互补的引物,用这2对引物对同一样品中DuCV和DHV模板进行二重PCR扩增。结果与结论：用建立的方法均同时得到了2条特异性的大小与实验设计相符（DuCV：245bp;DHV：569bp）的二重PCR扩增带,而且对其他禽病病原的PCR扩增结果均为阴性,能同时检出56Pg的DHVRNA模板和6Pg的DuCVDNA模板。     

Multiplex PCR for the identification of Anisakis simplex sensu stricto, Anisakis pegreffii and the other anisakid nematodes

A multiplex PCR method was established for the rapid identification of Anisakis simplex sensu stricto, A. pegreffii, A. physeteris, Pseudoterranova decipiens, Contracaecum osculatum and Hysterothylacium aduncum. The sequence alignment of the internal transcribed spacer 1 region (ITS-1) between A. simplex s. str. and A. pegreffii showed a high degree of similarity, but only two C-T transitions were observed. To differentiate A. simplex s. str. from A. pegreffii, an intentional mismatch primer with an artificial mismatched base at the second base from the primer 3' end was constructed. This intentional mismatch primer, which produced a PCR band only from A. pegreffii DNA, was able to differentiate the two morphologically indistinguishable sibling species of A. simplex. Specific forward primers for other anisakid species were also designed based on the nucleotide sequences of the ITS region. The multiplex PCR using these primers yielded distinct PCR products for each of the anisakid nematodes. The multiplex PCR established in this study would be a useful tool for identifying anisakid nematodes rapidly and accurately.     

SOP3: a web-based tool for selection of oligonucleotide primers for single nucleotide polymorphism analysis by Pyrosequencing

SOP3 is a web-based software tool for designing oligonucleotide primers for use in the analysis of single nucleotide polymorphisms (SNPs). Accessible via the Internet, the application is optimized for developing the PCR and sequencing primers that are necessary for Pyrosequencing. The application accepts as input gene name, SNP reference sequence number, or chromosomal nucleotide location. Output can be parsed by gene name, SNP reference number, heterozygosity value, location, chromosome, or function. The location of an individual polymorphism, such as an intron, exon, or 5' or 3' untranslated region is indicated, as are whether nucleotide changes in an exon are associated with a change in an amino acid sequence. SOP3 presents for each entry a set of forward and biotinylated reverse PCR primers as well as a sequencing primer for use during the analysis of SNPs by Pyrosequencing. Theoretical pyrograms for each allele are calculated and presented graphically. The method has been tested in the development of Pyrosequencing assays for determining SNPs and for deletion/insertion polymorphisms in the human genome. Of the SOP3-designed primer sets that were tested, a large majority of the primer sets have successfully produced PCR products and Pyrosequencing data.     

Rapid detection of gyrA and parC mutations in quinolone-resistant Salmonella enterica using Pyrosequencing technology

Fluoroquinolones are broad-spectrum antimicrobials highly effective in the treatment of a wide variety of clinical infections. Salmonella gastroenteritis is usually only treated with fluoroquinolones when the patient is elderly or immunocompromised. Fluoroquinolones are also used for the treatment of systemic Salmonella infection or for long-term salmonella carriage. Resistance to quinolones is commonly mediated by point mutations within the topoisomerase genes gyrA and parC. Pyrosequencing technology is a DNA sequencing method using 'sequencing by synthesis' and is suitable for the rapid detection of single nucleotide polymorphisms (SNPs). One hundred and ten Salmonella enterica isolates, representing 18 different serotypes, were used in this study. One hundred and four isolates had ciprofloxacin MICs of 0.25-32 microg/mL; the remaining six were ciprofloxacin-sensitive (ciprofloxacin MIC相似文献   

Method for preparing single-stranded DNA templates for Pyrosequencing using vector ligation and universal biotinylated primers

In Pyrosequencing, the addition of nucleotides to a primer-template hybrid is monitored by enzymatic conversion of chemical energy into detectable light. The technique yields both qualitative and quantitative sequence information because the chemical energy is released by a stoichiometric split off of pyrophosphates from incorporated deoxynucleotide triphosphates and a defined nucleotide dispensation order is given. Because Pyrosequencing works best if single-stranded DNA templates are used, template generation usually requires PCR with a target-specific biotinylated primer and a subsequent purification involving interaction of the biotin label with immobilized streptavidin. To circumvent the need for numerous and expensive template-specific biotinylated primers, we developed a method that uses the ligation of amplified DNA fragments into a plasmid vector, thereby facilitating subsequent PCR using a universal vector-specific biotinylated primer. This approach allows easy and straightforward isolation of single-stranded templates of any PCR product. As a proof of principle, we used the method for genotyping two single-nucleotide polymorphisms in the human genes CARD15 and A2M and for characterization of four multisite variations in the human DEFB104 gene.     

SNP-minisequencing as an excellent tool for analysing degraded DNA recovered from archival tissues

SNP-minisequencing has become common in forensic genetics, especially for analysing degraded or low copy number DNA (LCN DNA). The aim of this study was to examine the usefulness of five SNP (single nucleotide polymorphism) markers for analyzing degraded and LCN DNA recovered from archival samples. DNA extractions of eight formalin-fixed paraffin-embedded (FFPE) tissues were performed and DNA fragments were amplified in one multiplex PCR (polymerase chain reaction). SNPs were identified in a minisequencing reaction and a gel electrophoresis in ABI Prism 377 Sequencer. The research confirmed the usefulness of SNP-minisequencing for analysing FFPE tissues.     

Rapid SNP allele frequency determination in genomic DNA pools by pyrosequencing

Individual genotyping of single nucleotide polymorphisms (SNPs) remains expensive, especially for linkage disequilibrium mapping strategies involving high-throughput SNP genotyping. On one hand, current methods may suit scientific and laboratory needs in regard to accuracy, reproducibility/robustness, and large-scale application. On the other hand, a cheaper and less time-consuming alternative to individual genotyping is the use of SNP allelefrequencies determined in DNA pools. We have developed an accurate and reproducible protocol for allele frequency determination using Pyrosequencing technology in large genomic DNA pools (374 individuals). The measured correlation (R2) in large DNA pools was 0.980. In the context of disease-associated SNPs studies, we compared the allele frequencies between the disease (e.g., type 2 diabetes and obesity) and control groups detected by either individual genotyping or Pyrosequencing of DNA pools. In large pools, the variation between the two methods was 1.5 +/- 0.9%. It may be concluded that the allele frequency determination protocol could reliably detect over 4% differences between populations. The method is economical in regard to amounts of DNA, PCR, and primer extension reagents required. Furthermore, it allows the rapid determination of allelefrequency differences in case/control groups for association studies and susceptibility gene discovery in complex diseases.     

Molecular identification of Taenia tapeworms by Cox1 gene in Koh Kong, Cambodia

We collected fecal samples from 21 individuals infected with Taenia tapeworms in Koh Kong Province, Cambodia, and performed nucleotide sequencing of the cox1 gene and multiplex PCR on the eggs for DNA differential diagnosis of human Taenia tapeworms. Genomic DNA was extracted from the eggs of a minimum number of 10 isolated from fecal samples. Using oligonucleotide primers Ta7126F, Ts7313F, Tso7466F, and Rev7915, the multiplex PCR assay proved useful for differentially diagnosing Taenia solium, Taenia saginata, and Taenia asiatica based on 706, 629, and 474 bp bands, respectively. All of the Taenia specimens from Kho Kong, Cambodia, were identified as either T. saginata (n=19) or T. solium (n=2) by cox1 sequencing and multiplex PCR.     

Detection of Staphylococcus hyicus exfoliative toxin genes by dot blot hybridization and multiplex polymerase chain reaction

We designed a novel DNA probe and novel PCR primer sets for detecting the genes coding for Staphylococcus hyicus (S. hyicus) exfoliative toxin (ET). In dot blot hybridization, the novel DNA probe hybridized with chromosomal DNA of ExhA-, ExhB-, ExhC-, ExhD-, and SHETA-producing strains. This probe also hybridized with the plasmid DNA of a SHETB-producing strain. In Southern blot hybridization, the probe hybridized with a 1.5 kb HindIII fragment of chromosomal DNA from a SHETA-producing strain. The above fragment was cloned into E. coli and the nucleotide sequence of the SHETA gene determined, this gene proved to have almost the same homology (99.6%) as the ExhB gene. It was therefore thought that SHETA is a subtype of ExhB. In multiplex PCR using five primer sets, each gene gave a band distinguishable from the others. This multiplex PCR system has high specificity among the well-known S. hyicus ET genes. Of the 69 known ET-producing S. hyicus strains, 38, 19, 10, 2 and 1 strains have exhB, exhD exhA, shetb and exhC genes, respectively.     

Single nucleotide polymorphism (SNP) allele frequency estimation in DNA pools using Pyrosequencing

Identifying the genetic variation underlying complex disease requires analysis of many single nucleotide polymorphisms (SNPs) in a large number of samples. Several high-throughput SNP genotyping techniques are available; however, their cost promotes the use of association screening with pooled DNA. This protocol describes the estimation of SNP allele frequencies in pools of DNA using the quantitative sequencing method Pyrosequencing (PSQ). PSQ is a relatively recently described high-throughput method for genotyping, allele frequency estimation and DNA methylation analysis based on the detection of real-time pyrophosphate release during synthesis of the complementary strand to a PCR product. The protocol involves the following steps: (i) quantity and quality assessment of individual DNA samples; (ii) DNA pooling, which may be undertaken at the pre- or post-PCR stage; (iii) PCR amplification of PSQ template containing the variable sequence region of interest; and (iv) PSQ to determine the frequency of alleles at a particular SNP site. Once the quantity and quality of individual DNA samples has been assessed, the protocol usually requires a few days for setting up pre-PCR pools, depending on sample number. After PCR amplification, preparation and analysis of PCR amplicon by PSQ takes 1 h per plate.     

Single nucleotide polymorphism detection by combinatorial fluorescence energy transfer tags and biotinylated dideoxynucleotides

Combinatorial fluorescence energy transfer (CFET) tags, constructed by exploiting energy transfer and combinatorial synthesis, allow multiple biological targets to be analyzed simultaneously. We here describe a multiplex single nucleotide polymorphism (SNP) assay based on single base extension (SBE) using CFET tags and biotinylated dideoxynucleotides (biotin-ddNTPs). A library of CFET-labeled oligonucleotide primers was mixed with biotin-ddNTPs, DNA polymerase and the DNA templates containing the SNPs in a single tube. The nucleotide at the 3′-end of each CFET-labeled oligonucleotide primer was complementary to a particular SNP in the template. Only the CFET-labeled primer that is fully complementary to the DNA template was extended by DNA polymerase with a biotin-ddNTP. We isolated the DNA extension fragments that carry a biotin at the 3′-end by capture with streptavidin-coated magnetic beads, while the unextended primers were eliminated. The biotinylated fluorescent DNA fragments were subsequently analyzed in a multicolor fluorescence electrophoresis system. The distinct fluorescence signature and electrophoretic mobility of each DNA extension product in the electropherogram coded the SNPs without the use of a sizing standard. We simultaneously distinguished six nucleotide variations in synthetic DNA templates and a PCR product from the retinoblastoma tumor suppressor gene. The use of CFET-labeled primers and biotin-ddNTPs coupled with the specificity of DNA polymerase in SBE offered a multiplex method for detecting SNPs.     

A test of the multiplex pre-amplification approach in microsatellite genotyping of wolverine faecal DNA

Recently, a two-step PCR approach, referred to as multiplex pre-amplification, was proposed to improve microsatellite amplification from non-invasive samples such as faecal DNA. Here, we compare this new approach to standard PCR with respect to amplification success and genotyping error rates in microsatellite analysis (18 markers) of wolverine faecal DNA (48 extracts initially shown to contain amplifiable DNA). The multiplex pre-amplification approach was clearly advantageous both in terms of successful PCR amplifications (91% vs. 80%) and allelic dropout rate (2.4% vs. 12.5%). However, dropouts were to a high extent repeated in all second-step amplifications following multiplex pre-amplification, indicative of being generated during the initial PCR. Analysing more than one PCR from the initial multiplex PCR product may thus be of limited value. We instead suggest to perform two initial multiplex PCRs and to analyse a single second-step PCR from each of them. This was tested for 22 extracts at 18 loci and proved to be an effective way to obtaining a correct genotype.     

焦磷酸测序技术在确认北京严重急性呼吸综合征(SARS)病毒株并检测基因突变中的应用

结合严重急性呼吸综合征(SARS)病毒株序列信息分析和高通量测序技术,建立一种快速、简单地确定SARS病毒株并筛查SARS病毒突变位点和突变频率的方法。从感染人SARS病毒的Vero-6细胞中提取病毒RNA,反转录为cDNA后,PCR扩增目的基因片段,采用焦磷酸测序技术(Pyrosequencing Technology,PSQ)进行第2601、7919、9479、19838多个碱基突变位点测序和突变频率分析。通过测序分析多个可能出现突变的位点,确定了该病毒为北京流行株,同时发现第7919位碱基发生了A／G突变。PSQ技术对于高通量筛选研究病毒基因的突变和确定病毒株型别有着简单、快速、灵敏的特点。利用生物信息学分析核酸多态性,结合实验验证,可以确定SARS病毒流行株的特征,有利于对突发事件及早确定传染来源。     

Multiplex SNP-SCALE: a cost-effective medium-throughput single nucleotide polymorphism genotyping method

We describe a convenient, cost-effective and flexible medium-throughput single nucleotide polymorphism (SNP) genotyping method, Multiplex SNP-SCALE, which enables the simultaneous amplification by polymerase chain reaction (PCR) of up to 25 (or potentially more) loci followed by electrophoresis in an automated DNA sequencer. We extended the original SNP-SCALE method to include (i) use of a commercial multiplex PCR kit, (ii) a four-dye system, (iii) much-reduced (2-μL) reaction volumes, (iv) drying down of template DNA before PCR, (v) use of pig-tailed primers, (vi) a PCR product weighting system, (vii) a standard optimized touchdown PCR thermocycling programme, and (viii) software (SNP-SCALE Primer Designer) that automatically designs suitable SNP-SCALE primers for a batch of loci. This new protocol was validated for different types of SNPs. The method is cost- and time-effective for medium-scale evolutionary and ecological projects involving 10s to 100s of loci.     

A single multiplex PCR and SNaPshot minisequencing reaction of 42 SNPs to classify admixture populations into mitochondrial DNA haplogroups

SNaPshot minisequencing reaction is in increasing use because of its fast detection of many polymorphisms in a single assay. In this work we described a highly sensitive single nucleotide polymorphisms (SNPs) typing method with detection of 42 mitochondrial DNA (mtDNA) SNPs in a single PCR and SNaPshot multiplex reaction, in order to allow haplogroup classification in Latin American admixture population. We validated the panel typing 160 Brazilian individuals. Complete SNP profiles were obtained from 10 pg of total DNA. We conclude that it is possible to build and genotype more than forty mtDNA SNPs in a single multiplex PCR and SNaPshot reaction, with sensitivity and reliability, resolving haplogroup classification in admixture populations.     

Estimation of single nucleotide polymorphism allele frequency in DNA pools by using Pyrosequencing

Positional cloning of genes underlying complex diseases, such as type 2 diabetes mellitus (T2DM), typically follows a two-tiered process in which a chromosomal region is first identified by genome-wide linkage scanning, followed by association analyses using densely spaced single nucleotide polymorphic markers to identify the causal variant(s). The success of genome-wide single nucleotide polymorphism (SNP) detection has resulted in a vast number of potential markers available for use in the construction of such dense SNP maps. However, the cost of genotyping large numbers of SNPs in appropriately sized samples is nearly prohibitive. We have explored pooled DNA genotyping as a means of identifying differences in allele frequency between pools of individuals with T2DM and unaffected controls by using Pyrosequencing technology. We found that allele frequencies in pooled DNA were strongly correlated with those in individuals (r=0.99, P<0.0001) across a wide range of allele frequencies (0.02-0.50). We further investigated the sensitivity of this method to detect allele frequency differences between contrived pools, also over a wide range of allele frequencies. We found that Pyrosequencing was able to detect an allele frequency difference of less than 2% between pools, indicating that this method may be sensitive enough for use in association studies involving complex diseases where a small difference in allele frequency between cases and controls is expected.     

Method enabling pyrosequencing on double-stranded DNA

Pyrosequencing is a new nonelectrophoretic, single-tube DNA sequencing method that takes advantage of co-operativity between four enzymes to monitor DNA synthesis (M. Ronaghi, M. Uhlén, and P. Nyrén, Science 281, 363-365). Pyrosequencing has so far only been performed on single-stranded DNA. In this paper different enzymatic strategies for template preparation enabling pyrosequencing on double-stranded DNA were studied. High quality data were obtained with several different enzyme combinations: (i) shrimp alkaline phosphatase and exonuclease I, (ii) calf intestine alkaline phosphatase and exonuclease I, (iii) apyrase and inorganic pyrophosphatase together with exonuclease I, and (iv) apyrase and ATP sulfurylase together with exonuclease I. In many cases, when the polymerase chain reaction was efficient exonuclease I could be omitted. In certain cases, additives such as dimethyl sulfoxide, single-stranded DNA-binding protein, and Klenow DNA polymerase improved the sequence quality. Apyrase was the fastest and most efficient of the three different nucleotide degrading enzymes tested. The data quality obtained on double-stranded DNA was comparable with that on single-stranded DNA. Pyrosequencing data for more than 30 bases could be generated on both long and short templates, as well as on templates with high GC content.