Microcinematographic analysis of tethered Leptospira illini.

A model of Leptospira motility was recently proposed. One element of the model states that in translating cells the anterior spiral-shaped end gyrates counterclockwise and the posterior hook-shaped end gyrates clockwise. We tested these predictions by analyzing cells tethered to a glass surface. Leptospira illini was incubated with antibody-coated latex beads (Ab-beads). These beads adhered to the cells, and subsequently some cells became attached to either the slide or the cover glass via the Ab-beads. As previously reported, these cells rapidly moved back and forth across the surface of the beads. In addition, a general trend was observed: cells tethered to the cover glass rotated clockwise around the Ab-bead; cells tethered to the slide rotated counterclockwise around the Ab-bead. A computer-aided microcinematographic analysis of tethered cells indicated that the direction of rotation of cells around the Ab-bead was a function of both the surface of attachment and the shape of the cell ends. The results can best be explained by assuming that the gyrating ends interact with the glass surface to cause rotation around the Ab-beads. The analysis obtained indicates that the hook- and spiral-shaped ends rotate in the directions predicted by the model. In addition, the tethered cell assay permitted detection of rapid, coordinated reversals of the cell ends, e.g., cells rapidly switched from a hook-spiral configuration to a spiral-hook configuration. These results suggest the existance of a mechanism which coordinates the shape of the cell ends of L. illini.     

Immobilization effects of anticell and antiaxial filament sera on Treponema zuelzerae

Rabbit antisera were produced against whole cells and against highly purified axial filaments of Treponema zuelzerae. Both types of sera react with axial filaments. Antisera against whole cells immobilize the organism; antisera against axial filaments do not. The immobilizing activity of anticell sera could be neutralized by preabsorption with whole cells but not by preabsorption with axial filaments. Preabsorption with axial filaments did, however, abolish the ability of anticell sera to react with axial filaments. Anticell sera also react with the outer cell envelope; this ability was not affected by preabsorption with axial filaments. The data show that antibody directed at something other than axial filaments causes immobilization of T. zuelzerae. The results do not exclude the possibility that the axial filament is the organelle of motility. Titration of the immobilizing activity of anticell sera by adding a constant amount of motile cells to serial dilutions of serum gave two zones of maximum immobilization, one with undiluted serum and one at higher dilutions. For a fixed amount of antiserum, increasing the numbers of cells in the titration almost, but not quite, abolished the zone phenomenon. This phenomenon appears to result from the presence of two kinds of immobilizing antibodies in anticell serum. One of these belongs to the IgG class of immunoglobulins. The other has not been identified but is present in a serum globulin fraction which contains IgM. At intermediate concentrations, the "IgM fraction" inhibits the immobilizing activity of IgG without itself causing immobilization.     

Gliding motility and polarized slime secretion

Myxococcus leaves a trail of slime on agar as it moves. A filament of slime can be seen attached to the end of a cell, but it is seen only at one end at any particular moment. To identify genes essential for A motility, transposon insertion mutations with defective A motility were studied. Fifteen of the 33 mutants had totally lost A motility. All these mutant cells had filaments of slime emerging from both ends, indicating that bipolar secretion prevents A motility. The remaining 18 A motility mutants, also produced by gene knockout, secreted slime only from one pole, but they swarmed at a lower rate than A(+) and are called 'partial' gliding mutants, or pgl. For each pgl mutant, the reduction in swarm expansion rate was directly proportional to the reduction in the coefficient of elasticotaxis. The pgl mutants have a normal reversal frequency and normal gliding speed when they move. But their probability of movement per unit time is lower than pgl(+) cells. Many of the pgl mutants are produced by transposon insertions in glycosyltransferase genes. It is proposed that these glycosyltransferases carry out the synthesis of a repeat unit polysaccharide that constitutes the slime.     

The effects of alkalinity and hypertonicity on the morphology and motility of Leptospira interrogans (biflexa) strain B16.

Effects of alkalinity and hypertonicity on the motile behaviour of Leptospira interrogans (biflexa) B16 were observed, quantified, and compared with effects previously shown by similar factors on the motility of eubacteria. Leptospira interrogans tolerated relatively high concentrations of hydroxide ions. Motility similar to that in controls was observed at pH values up to 9-8; but at pH 10-0 motility declined sharply with time of exposure, and there was structural alteration, visible as a blebbing of the cell envelope. Unlike the behaviour of eubacteria, immobilization of L. interrogans induced by hydroxide ions could not be reversed by lowering the pH. It is suggested that by restricting entry of hydroxide ions, the cell envelope protects its motility apparatus from adverse effects. Leptospira interrogans was completely immobilized in 0-5 M and 1-0 M-sucrose solutions. Unlike the eubacteria, leptospires were incapable of spontaneous reversion to motile forms and resumption of motility was dependent on both concentration and time of exposure to sucrose. Deuterium oxide did not affect movement, suggesting that even though leptospire endoflagella and the exoflagella of eubacteria are analogous, the motile behaviour of L. interrogans is significantly different from that of eubacteria.     

The shape and dynamics of the Leptospiraceae

Most swimming bacteria produce thrust by rotating helical filaments called flagella. Typically, the flagella stick out into the external fluid environment; however, in the spirochetes, a unique group that includes some highly pathogenic species of bacteria, the flagella are internalized, being incased in the periplasmic space; i.e., between the outer membrane and the cell wall. This coupling between the periplasmic flagella and the cell wall allows the flagella to serve a skeletal, as well as a motile, function. In this article, we propose a mathematical model for spirochete morphology based on the elastic interaction between the cell body and the periplasmic flagella. This model describes the mechanics of the composite structure of the cell cylinder and periplasmic flagella and accounts for the morphology of Leptospiraceae. This model predicts that the cell cylinder should be roughly seven times stiffer than the flagellum. In addition, we explore how rotation of the periplasmic flagellum deforms the cell cylinder during motility. We show that the transition between hook-shaped and spiral-shaped ends is purely a consequence of the change in direction of the flagellar motor and does not require flagellar polymorphism.     

How is actin polymerization nucleated in vivo?

Actin polymerization in vivo is dependent on free barbed ends that act as nuclei. Free barbed ends can arise in vivo by nucleation from the Arp2/3 complex, uncapping of barbed ends on pre-existing filaments or severing of filaments by cofilin. There is evidence that each mechanism operates in cells. However, different cell types use different combinations of these processes to generate barbed ends during stimulated cell motility. Here, I describe recent attempts to define the relative contributions of these three mechanisms to actin nucleation in vivo. The rapid increase in the number of barbed ends during stimulation is not due to any single mechanism. Cooperation between capping proteins, cofilin and the Arp2/3 complex is necessary for the development of protrusive force at the leading edge of the cell: uncapping and cofilin severing contributing barbed ends, whereas activity of the Arp2/3 complex is necessary, but not sufficient, for lamellipod extension. These results highlight the need for new methods that enable the direct observation of actin nucleation and so define precisely the relative contributions of the three processes to stimulated cell motility.     

Actin filament polymerization regulates gliding motility by apicomplexan parasites

Host cell entry by Toxoplasma gondii depends critically on actin filaments in the parasite, yet paradoxically, its actin is almost exclusively monomeric. In contrast to the absence of stable filaments in conventional samples, rapid-freeze electron microscopy revealed that actin filaments were formed beneath the plasma membrane of gliding parasites. To investigate the role of actin filaments in motility, we treated parasites with the filament-stabilizing drug jasplakinolide (JAS) and monitored the distribution of actin in live and fixed cells using yellow fluorescent protein (YFP)-actin. JAS treatment caused YFP-actin to redistribute to the apical and posterior ends, where filaments formed a spiral pattern subtending the plasma membrane. Although previous studies have suggested that JAS induces rigor, videomicroscopy demonstrated that JAS treatment increased the rate of parasite gliding by approximately threefold, indicating that filaments are rate limiting for motility. However, JAS also frequently reversed the normal direction of motility, disrupting forward migration and cell entry. Consistent with this alteration, subcortical filaments in JAS-treated parasites occurred in tangled plaques as opposed to the straight, roughly parallel orientation observed in control cells. These studies reveal that precisely controlled polymerization of actin filaments imparts the correct timing, duration, and directionality of gliding motility in the Apicomplexa.     

Control of actin filament length and turnover by actin depolymerizing factor (ADF/cofilin) in the presence of capping proteins and ARP2/3 complex.

The effect of Arabidopsis thaliana ADF1 and human ADF on the number of filaments in F-actin solutions has been examined using a seeded polymerization assay. ADF did not sever filaments in a catalytic fashion, but decreased the steady-state length distribution of actin filaments in correlation with its effect on actin dynamics. The increase in filament number was modest as compared with the large increase in filament turnover. ADF did not decrease the length of filaments shorter than 1 micrometer. ADF promoted the rapid turnover of gelsolin-capped filaments in a manner dependent on the number of pointed ends. To explain these results, we propose that, as a consequence of the cooperative binding of ADF to F-actin, two populations of energetically different filaments coexist in solution pending a flux of subunits from one to the other. The ADF-decorated filaments depolymerize rapidly from their pointed ends, while undecorated filaments polymerize. ADF also promotes rapid turnover of gelsolin-capped filaments in the presence of the pointed end capper Arp2/3 complex. It is shown that the Arp2/3 complex steadily generates new barbed ends in solutions of gelsolin-capped filaments, which represents an important aspect of its function in actin-based motility.     

Regulation of actin dynamics in rapidly moving cells: a quantitative analysis

We develop a mathematical model that describes key details of actin dynamics in protrusion associated with cell motility. The model is based on the dendritic-nucleation hypothesis for lamellipodial protrusion in nonmuscle cells such as keratocytes. We consider a set of partial differential equations for diffusion and reactions of sequestered actin complexes, nucleation, and growth by polymerization of barbed ends of actin filaments, as well as capping and depolymerization of the filaments. The mechanical aspect of protrusion is based on an elastic polymerization ratchet mechanism. An output of the model is a relationship between the protrusion velocity and the number of filament barbed ends pushing the membrane. Significantly, this relationship has a local maximum: too many barbed ends deplete the available monomer pool, too few are insufficient to generate protrusive force, so motility is stalled at either extreme. Our results suggest that to achieve rapid motility, some tuning of parameters affecting actin dynamics must be operating in the cell.     

Pointed-end capping by tropomodulin3 negatively regulates endothelial cell motility

Actin filament pointed-end dynamics are thought to play a critical role in cell motility, yet regulation of this process remains poorly understood. We describe here a previously uncharacterized tropomodulin (Tmod) isoform, Tmod3, which is widely expressed in human tissues and is present in human microvascular endothelial cells (HMEC-1). Tmod3 is present in sufficient quantity to cap pointed ends of actin filaments, localizes to actin filament structures in HMEC-1 cells, and appears enriched in leading edge ruffles and lamellipodia. Transient overexpression of GFP-Tmod3 leads to a depolarized cell morphology and decreased cell motility. A fivefold increase in Tmod3 results in an equivalent decrease in free pointed ends in the cells. Unexpectedly, a decrease in the relative amounts of F-actin, free barbed ends, and actin-related protein 2/3 (Arp2/3) complex in lamellipodia are also observed. Conversely, decreased expression of Tmod3 by RNA interference leads to faster average cell migration, along with increases in free pointed and barbed ends in lamellipodial actin filaments. These data collectively demonstrate that capping of actin filament pointed ends by Tmod3 inhibits cell migration and reveal a novel control mechanism for regulation of actin filaments in lamellipodia.     

Motility and chemotaxis of filamentous cells of Escherichia coli

Filamentous cells of Escherichia coli can be produced by treatment with the antibiotic cephalexin, which blocks cell division but allows cell growth. To explore the effect of cell size on chemotactic activity, we studied the motility and chemotaxis of filamentous cells. The filaments, up to 50 times the length of normal E. coli organisms, were motile and had flagella along their entire lengths. Despite their increased size, the motility and chemotaxis of filaments were very similar to those properties of normal-sized cells. Unstimulated filaments of chemotactically normal bacteria ran and stopped repeatedly (while normal-sized bacteria run and tumble repeatedly). Filaments responded to attractants by prolonged running (like normal-sized bacteria) and to repellents by prolonged stopping (unlike normal-sized bacteria, which tumble), until adaptation restored unstimulated behavior (as occurs with normal-sized cells). Chemotaxis mutants that always ran when they were normal sized always ran when they were filament sized, and those mutants that always tumbled when they were normal sized always stopped when they were filament sized. Chemoreceptors in filaments were localized to regions both at the poles and at intervals along the filament. We suggest that the location of the chemoreceptors enables the chemotactic responses observed in filaments. The implications of this work with regard to the cytoplasmic diffusion of chemotaxis components in normal-sized and filamentous E. coli are discussed.     

Bacillus subtilis Bactofilins Are Essential for Flagellar Hook- and Filament Assembly and Dynamically Localize into Structures of Less than 100 nm Diameter underneath the Cell Membrane

Bactofilins are a widely conserved protein family implicated in cell shape maintenance and in bacterial motility. We show that the bactofilins BacE and BacF from Bacillus subtilis are essential for motility. The proteins are required for the establishment of flagellar hook- and filament structures, but apparently not for the formation of basal bodies. Functional YFP fusions to BacE and to BacF localize as discrete assemblies at the B. subtilis cell membrane, and have a diameter of 60 to 70 nm. BacF assemblies are relatively static, and partially colocalize with flagellar basal bodies, while BacE assemblies are fewer per cell than those of BacF and are highly mobile. Tracking of BacE foci showed that the assemblies arrest at a single point for a few hundred milliseconds, showing that a putative interaction with flagellar structures would be transient and fast. When overexpressed or expressed in a heterologous cell system, bactofilins can form filamentous structures, and also form multimers as purified proteins. Our data reveal a propensity for bactofilins to form filaments, however, in B. subtilis cells, bactofilins assemble into defined size assemblies that show a dynamic localization pattern and play a role in flagellar assembly.     

The Arp2/3 complex branches filament barbed ends: functional antagonism with capping proteins

The Arp2/3 complex is an essential regulator of actin polymerization in response to signalling and generates a dendritic array of filaments in lamellipodia. Here we show that the activated Arp2/3 complex interacts with the barbed ends of filaments to initiate barbed-end branching. Barbed-end branching by Arp2/3 quantitatively accounts for polymerization kinetics and for the length correlation of the branches of filaments observed by electron microscopy. Filament branching is visualized at the surface of Listeria in a reconstituted motility assay. The functional antagonism between the Arp2/3 complex and capping proteins is essential in the maintenance of the steady state of actin assembly and actin-based motility.     

Structural links to kinesin directionality and movement

The kinesin motor proteins generate directional movement along microtubules and are involved in many vital processes, including cell division, in eukaryotes. The kinesin superfamily is characterized by a conserved motor domain of approximately 320 residues. Dimeric constructs of N and C class kinesins, with the motor domains at opposite ends of the heavy chain, move towards microtubule plus and minus ends, respectively. Their crystal structures differ mainly in the region linking the motor domain core to the alpha-helical coiled coil dimerization domain. Chimeric kinesins show that regions outside of the motor domain core determine the direction of movement and mutations in the linker region have a strong effect on motility. Recent work on chimeras and mutants is discussed in a structural context giving insights to possible molecular mechanisms of kinesin directionality and motility.     

Actin filament attachments for sustained motility in vitro are maintained by filament bundling

We reconstructed cellular motility in vitro from individual proteins to investigate how actin filaments are organized at the leading edge. Using total internal reflection fluorescence microscopy of actin filaments, we tested how profilin, Arp2/3, and capping protein (CP) function together to propel thin glass nanofibers or beads coated with N-WASP WCA domains. Thin nanofibers produced wide comet tails that showed more structural variation in actin filament organization than did bead substrates. During sustained motility, physiological concentrations of Mg(2+) generated actin filament bundles that processively attached to the nanofiber. Reduction of total Mg(2+) abolished particle motility and actin attachment to the particle surface without affecting actin polymerization, Arp2/3 nucleation, or filament capping. Analysis of similar motility of microspheres showed that loss of filament bundling did not affect actin shell formation or symmetry breaking but eliminated sustained attachments between the comet tail and the particle surface. Addition of Mg(2+), Lys-Lys(2+), or fascin restored both comet tail attachment and sustained particle motility in low Mg(2+) buffers. TIRF microscopic analysis of filaments captured by WCA-coated beads in the absence of Arp2/3, profilin, and CP showed that filament bundling by polycation or fascin addition increased barbed end capture by WCA domains. We propose a model in which CP directs barbed ends toward the leading edge and polycation-induced filament bundling sustains processive barbed end attachment to the leading edge.     

Capping protein increases the rate of actin-based motility by promoting filament nucleation by the Arp2/3 complex

Capping protein (CP) is an integral component of Arp2/3-nucleated actin networks that drive amoeboid motility. Increasing the concentration of capping protein, which caps barbed ends of actin filaments and prevents elongation, increases the rate of actin-based motility in vivo and in vitro. We studied the synergy between CP and Arp2/3 using an in vitro actin-based motility system reconstituted from purified proteins. We find that capping protein increases the rate of motility by promoting more frequent filament nucleation by the Arp2/3 complex and not by increasing the rate of filament elongation as previously suggested. One consequence of this coupling between capping and nucleation is that, while the rate of motility depends strongly on the concentration of CP and Arp2/3, the net rate of actin assembly is insensitive to changes in either factor. By reorganizing their architecture, dendritic actin networks harness the same assembly kinetics to drive different rates of motility.     

Cell division, guillotining of dimer chromosomes and SOS induction in resolution mutants (dif, xerC and xerD) of Escherichia coli

We have studied the growth and division of xerC, xerD and dif mutants of Escherichia coli, which are unable to resolve dimer chromosomes. These mutants express the Dif phenotype, which includes reduced viability, SOS induction and filamentation, and abnormal nucleoid morphology. Growth was studied in synchronous cultures and in microcolonies derived from single cells. SOS induction and filamentation commenced after an apparently normal cell division, which sheared unresolved dimer chromosomes. This has been called guillotining. Microcolony analysis demonstrated that cell division in the two daughter cells was inhibited after guillotining, and microcolonies formed that consisted of two filaments lying side by side. Growth of these filaments was severely reduced in hipA+ strains. We propose that guillotining at dif destroys the expression of the adjacent hipBA genes and, in the absence of continued formation of HipB, HipA inhibits growth. The length of the filaments was also affected by SfiA: sfiA dif hipA mutants initially formed filaments, but cell division at the ends of the filaments ultimately produced a number of DNA-negative cells. If SOS induction was blocked by lexA3 (Ind-), filaments did not form, and cell division was not inhibited. However, pedigree analysis of cells in microcolonies demonstrated that lethal sectoring occurred as a result of limited growth and division of dead cells produced by guillotining.     

Malaria Parasite Actin Polymerization and Filament Structure

A novel form of acto-myosin regulation has been proposed in which polymerization of new actin filaments regulates motility of parasites of the apicomplexan class of protozoa. In vivo and in vitro parasite F-actin is very short and unstable, but the structural basis and details of filament dynamics remain unknown. Here, we show that long actin filaments can be obtained by polymerizing unlabeled rabbit skeletal actin (RS-actin) onto both ends of the short rhodamine-phalloidin-stabilized Plasmodium falciparum actin I (Pf-actin) filaments. Following annealing, hybrid filaments of micron length and “zebra-striped” appearance are observed by fluorescence microscopy that are stable enough to move over myosin class II motors in a gliding filament assay. Using negative stain electron microscopy we find that pure Pf-actin stabilized by jasplakinolide (JAS) also forms long filaments, indistinguishable in length from RS-actin filaments, and long enough to be characterized structurally. To compare structures in near physiological conditions in aqueous solution we imaged Pf-actin and RS-actin filaments by atomic force microscopy (AFM). We found the monomer stacking to be distinctly different for Pf-actin compared with RS-actin, such that the pitch of the double helix of Pf-actin filaments was 10% larger. Our results can be explained by a rotational angle between subunits that is larger in the parasite compared with RS-actin. Modeling of the AFM data using high-resolution actin filament models supports our interpretation of the data. The structural differences reported here may be a consequence of weaker inter- and intra-strand contacts, and may be critical for differences in filament dynamics and for regulation of parasite motility.     

Characterization and functional analysis of seven flagellin genes in Rhizobium leguminosarum bv. viciae. Characterization of R. leguminosarum flagellins

Background

Rhizobium leguminosarum bv. viciae establishes symbiotic nitrogen fixing partnerships with plant species belonging to the Tribe Vicieae, which includes the genera Vicia, Lathyrus, Pisum and Lens. Motility and chemotaxis are important in the ecology of R. leguminosarum to provide a competitive advantage during the early steps of nodulation, but the mechanisms of motility and flagellar assembly remain poorly studied. This paper addresses the role of the seven flagellin genes in producing a functional flagellum.

Results

R. leguminosarum strains 3841 and VF39SM have seven flagellin genes (flaA, flaB, flaC, flaD, flaE, flaH, and flaG), which are transcribed separately. The predicted flagellins of 3841 are highly similar or identical to the corresponding flagellins in VF39SM. flaA, flaB, flaC, and flaD are in tandem array and are located in the main flagellar gene cluster. flaH and flaG are located outside of the flagellar/motility region while flaE is plasmid-borne. Five flagellin subunits (FlaA, FlaB, FlaC, FlaE, and FlaG) are highly similar to each other, whereas FlaD and FlaH are more distantly related. All flagellins exhibit conserved amino acid residues at the N- and C-terminal ends and are variable in the central regions. Strain 3841 has 1-3 plain subpolar flagella while strain VF39SM exhibits 4-7 plain peritrichous flagella. Three flagellins (FlaA/B/C) and five flagellins (FlaA/B/C/E/G) were detected by mass spectrometry in the flagellar filaments of strains 3841 and VF39SM, respectively. Mutation of flaA resulted in non-motile VF39SM and extremely reduced motility in 3841. Individual mutations of flaB and flaC resulted in shorter flagellar filaments and consequently reduced swimming and swarming motility for both strains. Mutant VF39SM strains carrying individual mutations in flaD, flaE, flaH, and flaG were not significantly affected in motility and filament morphology. The flagellar filament and the motility of 3841 strains with mutations in flaD and flaG were not significantly affected while flaE and flaH mutants exhibited shortened filaments and reduced swimming motility.

Conclusion

The results obtained from this study demonstrate that FlaA, FlaB, and FlaC are major components of the flagellar filament while FlaD and FlaG are minor components for R. leguminosarum strains 3841 and VF39SM. We also observed differences between the two strains, wherein FlaE and FlaH appear to be minor components of the flagellar filaments in VF39SM but these flagellin subunits may play more important roles in 3841. This paper also demonstrates that the flagellins of 3841 and VF39SM are possibly glycosylated.     

Myosin surface loop 4 modulates inhibition of actomyosin 1b ATPase activity by tropomyosin

Structural studies of the class I myosin, MyoE, led to the predictions that loop 4, a surface loop near the actin-binding region that is longer in class I myosins than in other myosin subclasses, might limit binding of myosins I to actin when actin-binding proteins, like tropomyosin, are present, and might account for the exclusion of myosin I from stress fibers. To test these hypotheses, mutant molecules of the related mammalian class I myosin, Myo1b, in which loop 4 was truncated (from an amino acid sequence of RMNGLDES to NGLD) or replaced with the shorter and distinct loop 4 found in Dictyostelium myosin II (GAGEGA), were expressed in vitro and their interaction with actin and with actin-tropomyosin was tested. Saturating amounts of expressed fibroblast tropomyosin-2 resulted in a decrease in the maximum actin-activated Mg2+-ATPase activity of wild-type Myo1b but had little or no effect on the actin-activated Mg2+-ATPase activity of the two mutants. In motility assays, few actin filaments bound tightly to Myo1b-WT-coated cover slips when tropomyosin-2 was present, whereas actin filaments both bound and were translocated by Myo1b-NGLD or Myo1b-GAGEGA in both the presence and absence of tropomyosin-2. When expressed in mammalian cells, like the wild type, the mutant myosins were largely excluded from tropomyosin-containing actin filaments, indicating that in the cell additional factors besides loop 4 determine targeting of myosins I to specific subpopulations of actin filaments.