Substitution of a hydrophobic residue alters the conformational stability of Shaker K+ channels during gating and assembly.

A leucine residue at position 370 (L370) in 29-4 Shaker K+ channels resides within two overlapping sequence motifs conserved among most voltage-gated channels: the S4 segment and a leucine heptad repeat. Here we investigate the effects observed upon substitution of L370 with many other uncharged amino acid residues. We find that smaller or more hydrophilic residues produce greater alterations in both activation and inactivation gating than does substitution with other large hydrophobic residues. In addition, subunits containing less conservative substitutions at position 370 are restricted in their assembly with wild-type subunits and are unlikely to form homomultimeric channel complexes. Consistent with the idea that L370 influences the tertiary structure of these channels, the results indicate that L370 undergoes specific hydrophobic interactions during the conformational transitions of gating; similar interactions may take place during the folding, insertion, or assembly of Shaker K+ channel subunits.     

Hydrophobic substitution mutations in the S4 sequence alter voltage-dependent gating in Shaker K+ channels

Voltage-activated Na+, Ca2+, and K+ channels contain a common motif, the S4 sequence, characterized by a basic residue at every third position interspersed mainly with hydrophobic residues. The S4 sequence is proposed to function as the voltage sensor and to move in response to membrane depolarization, triggering conformational changes that open the channel. This hypothesis has been tested in previous studies which revealed that mutations of the S4 basic residues often shift the curve of voltage dependence of activation along the voltage axis. We find that comparable or larger shifts are caused by conservative substitutions of hydrophobic residues in the S4 sequence of the Shaker K+ channel. We suggest that the S4 structure plays an essential role in determining the relative stabilities of the closed and open states of the channel.     

Mutations in the S4 region isolate the final voltage-dependent cooperative step in potassium channel activation

Charged residues in the S4 transmembrane segment play a key role in determining the sensitivity of voltage-gated ion channels to changes in voltage across the cell membrane. However, cooperative interactions between subunits also affect the voltage dependence of channel opening, and these interactions can be altered by making substitutions at uncharged residues in the S4 region. We have studied the activation of two mutant Shaker channels that have different S4 amino acid sequences, ILT (V369I, I372L, and S376T) and Shaw S4 (the S4 of Drosophila Shaw substituted into Shaker), and yet have very similar ionic current properties. Both mutations affect cooperativity, making a cooperative transition in the activation pathway rate limiting and shifting it to very positive voltages, but analysis of gating and ionic current recordings reveals that the ILT and Shaw S4 mutant channels have different activation pathways. Analysis of gating currents suggests that the dominant effect of the ILT mutation is to make the final cooperative transition to the open state of the channel rate limiting in an activation pathway that otherwise resembles that of Shaker. The charge movement associated with the final gating transition in ILT activation can be measured as an isolated component of charge movement in the voltage range of channel opening and accounts for 13% ( approximately 1.8 e0) of the total charge moved in the ILT activation pathway. The remainder of the ILT gating charge (87%) moves at negative voltages, where channels do not open, and confirms the presence of Shaker-like conformational changes between closed states in the activation pathway. In contrast to ILT, the activation pathway of Shaw S4 seems to involve a single cooperative charge-moving step between a closed and an open state. We cannot detect any voltage-dependent transitions between closed states for Shaw S4. Restoring basic residues that are missing in Shaw S4 (R1, R2, and K7) rescues charge movement between closed states in the activation pathway, but does not alter the voltage dependence of the rate-limiting transition in activation.     

Glutamate substitution in repeat IV alters divalent and monovalent cation permeation in the heart Ca2+ channel.

In voltage-gated ion channels, residues responsible for ion selectivity were identified in the pore-lining SS1-SS2 segments. Negatively charged glutamate residues (E393, E736, E1145, and E1446) found in each of the four repeats of the alpha 1C subunit were identified as the major determinant of selectivity in Ca2+ channels. Neutralization of glutamate residues by glutamine in repeat I (E393Q), repeat III (E1145Q), and repeat IV (E1446Q) decreased the channel affinity for calcium ions 10-fold from the wild-type channel. In contrast, neutralization of glutamate residues in repeat II failed to significantly alter Ca2+ affinity. Likewise, mutation of neighboring residues in E1149K and D1450N did not affect the channel affinity, further supporting the unique role of glutamate residues E1145 in repeat III and E1446 in repeat IV in determining Ca2+ selectivity. Conservative mutations E1145D and E1446D preserved high-affinity Ca2+ binding, which suggests that the interaction between Ca2+ and the pore ligand sites is predominantly electrostatic and involves charge neutralization. Mutational analysis of E1446 showed additionally that polar residues could achieve higher Ca2+ affinity than small hydrophobic residues could. The role of high-affinity calcium binding sites in channel permeation was investigated at the single-channel level. Neutralization of glutamate residue in repeats I, II, and III did not affect single-channel properties measured with 115 mM BaCl2. However, mutation of the high-affinity binding site E1446 was found to significantly affect the single-channel conductance for Ba2+ and Li+, providing strong evidence that E1446 is located in the narrow region of the channel outer mouth. Side-chain substitutions at 1446 in repeat IV were used to probe the nature of divalent cation-ligand interaction and monovalent cation-ligand interaction in the calcium channel pore. Monovalent permeation was found to be inversely proportional to the volume of the side chain at position 1446, with small neutral residues such as alanine and glycine producing higher Li+ currents than the wild-type channel. This suggests that steric hindrance is a major determinant for monovalent cation conductance. Divalent permeation was more complex. Ba2+ single-channel conductance decreased when small neutral residues such as glycine were replaced by bulkier ones such as glutamine. However, negatively charged amino acids produced single-channel conductance higher than predicted from the size of their side chain. Hence, negatively charged residues at position 1446 in repeat IV are required for divalent cation permeation.     

A hot spot for the interaction of gating modifier toxins with voltage-dependent ion channels

The gating modifier toxins are a large family of protein toxins that modify either activation or inactivation of voltage-gated ion channels. omega-Aga-IVA is a gating modifier toxin from spider venom that inhibits voltage-gated Ca(2+) channels by shifting activation to more depolarized voltages. We identified two Glu residues near the COOH-terminal edge of S3 in the alpha(1A) Ca(2+) channel (one in repeat I and the other in repeat IV) that align with Glu residues previously implicated in forming the binding sites for gating modifier toxins on K(+) and Na(+) channels. We found that mutation of the Glu residue in repeat I of the Ca(2+) channel had no significant effect on inhibition by omega-Aga-IVA, whereas the equivalent mutation of the Glu in repeat IV disrupted inhibition by the toxin. These results suggest that the COOH-terminal end of S3 within repeat IV contributes to forming a receptor for omega-Aga-IVA. The strong predictive value of previous mapping studies for K(+) and Na(+) channel toxins argues for a conserved binding motif for gating modifier toxins within the voltage-sensing domains of voltage-gated ion channels.     

Role of charged residues in the S1-S4 voltage sensor of BK channels

The activation of large conductance Ca(2+)-activated (BK) potassium channels is weakly voltage dependent compared to Shaker and other voltage-gated K(+) (K(V)) channels. Yet BK and K(V) channels share many conserved charged residues in transmembrane segments S1-S4. We mutated these residues individually in mSlo1 BK channels to determine their role in voltage gating, and characterized the voltage dependence of steady-state activation (P(o)) and I(K) kinetics (tau(I(K))) over an extended voltage range in 0-50 microM [Ca(2+)](i). mSlo1 contains several positively charged arginines in S4, but only one (R213) together with residues in S2 (D153, R167) and S3 (D186) are potentially voltage sensing based on the ability of charge-altering mutations to reduce the maximal voltage dependence of P(O). The voltage dependence of P(O) and tau(I(K)) at extreme negative potentials was also reduced, implying that the closed-open conformational change and voltage sensor activation share a common source of gating charge. Although the position of charged residues in the BK and K(V) channel sequence appears conserved, the distribution of voltage-sensing residues is not. Thus the weak voltage dependence of BK channel activation does not merely reflect a lack of charge but likely differences with respect to K(V) channels in the position and movement of charged residues within the electric field. Although mutation of most sites in S1-S4 did not reduce gating charge, they often altered the equilibrium constant for voltage sensor activation. In particular, neutralization of R207 or R210 in S4 stabilizes the activated state by 3-7 kcal mol(-1), indicating a strong contribution of non-voltage-sensing residues to channel function, consistent with their participation in state-dependent salt bridge interactions. Mutations in S4 and S3 (R210E, D186A, and E180A) also unexpectedly weakened the allosteric coupling of voltage sensor activation to channel opening. The implications of our findings for BK channel voltage gating and general mechanisms of voltage sensor activation are discussed.     

Gating of shaker-type channels requires the flexibility of S6 caused by prolines

The recent crystallization of a voltage-gated K+ channel has given insight into the structure of these channels but has not resolved the issues of the location and the operation of the gate. The conserved PXP motif in the S6 segment of Shaker channels has been proposed to contribute to the intracellular gating structure. To investigate the role of this motif in the destabilization of the alpha-helix, both prolines were replaced to promote an alpha-helix (alanine) or to allow a flexible configuration (glycine). These substitutions were nonfunctional or resulted in drastically altered channel gating, highlighting an important role of these prolines. Combining these mutations with a proline substitution scan demonstrated that proline residues in the midsection of S6 are required for functionality, but not necessarily at the positions conserved throughout evolution. These results indicate that the destabilization or bending of the S6 alpha-helix caused by the PXP motif apparently creates a flexible "hinge" that allows movement of the lower S6 segment during channel gating and opening.     

Transfer of ion binding site from ether-à-go-go to Shaker: Mg2+ binds to resting state to modulate channel opening

In ether-à-go-go (eag) K⁺ channels, extracellular divalent cations bind to the resting voltage sensor and thereby slow activation. Two eag-specific acidic residues in S2 and S3b coordinate the bound ion. Residues located at analogous positions are ∼4 Å apart in the x-ray structure of a Kv1.2/Kv2.1 chimera crystallized in the absence of a membrane potential. It is unknown whether these residues remain in proximity in Kv1 channels at negative voltages when the voltage sensor domain is in its resting conformation. To address this issue, we mutated Shaker residues I287 and F324, which correspond to the binding site residues in eag, to aspartate and recorded ionic and gating currents in the presence and absence of extracellular Mg²⁺. In I287D+F324D, Mg²⁺ significantly increased the delay before ionic current activation and slowed channel opening with no readily detectable effect on closing. Because the delay before Shaker opening reflects the initial phase of voltage-dependent activation, the results indicate that Mg²⁺ binds to the voltage sensor in the resting conformation. Supporting this conclusion, Mg²⁺ shifted the voltage dependence and slowed the kinetics of gating charge movement. Both the I287D and F324D mutations were required to modulate channel function. In contrast, E283, a highly conserved residue in S2, was not required for Mg²⁺ binding. Ion binding affected activation by shielding the negatively charged side chains of I287D and F324D. These results show that the engineered divalent cation binding site in Shaker strongly resembles the naturally occurring site in eag. Our data provide a novel, short-range structural constraint for the resting conformation of the Shaker voltage sensor and are valuable for evaluating existing models for the resting state and voltage-dependent conformational changes that occur during activation. Comparing our data to the chimera x-ray structure, we conclude that residues in S2 and S3b remain in proximity throughout voltage-dependent activation.     

Electrostatic interactions between transmembrane segments mediate folding of Shaker K+ channel subunits.

In voltage-dependent Shaker K+ channels, charged residues E293 in transmembrane segment S2 and R365, R368, and R371 in S4 contribute significantly to the gating charge movement that accompanies activation. Using an intragenic suppression strategy, we have now probed for structural interaction between transmembrane segments S2, S3, and S4 in Shaker channels. Charge reversal mutations of E283 in S2 and K374 in S4 disrupt maturation of the protein. Maturation was specifically and efficiently rescued by second-site charge reversal mutations, indicating that electrostatic interactions exist between E283 in S2 and R368 and R371 in S4, and between K374 in S4 and E293 in S2 and D316 in S3. Rescued subunits were incorporated into functional channels, demonstrating that a native structure was restored. Our data indicate that K374 interacts with E293 and D316 within the same subunit. These electrostatic interactions mediate the proper folding of the protein and are likely to persist in the native structure. Our results raise the possibility that the S4 segment is tilted relative to S2 and S3 in the voltage-sensing domain of Shaker channels. Such an arrangement might provide solvent access to voltage-sensing residues, which we find to be highly tolerant of mutations.     

Voltage-dependent structural interactions in the Shaker K(+) channel

Using a strategy related to intragenic suppression, we previously obtained evidence for structural interactions in the voltage sensor of Shaker K(+) channels between residues E283 in S2 and R368 and R371 in S4 (Tiwari-Woodruff, S.K., C.T. Schulteis, A.F. Mock, and D. M. Papazian. 1997. Biophys. J. 72:1489-1500). Because R368 and R371 are involved in the conformational changes that accompany voltage-dependent activation, we tested the hypothesis that these S4 residues interact with E283 in S2 in a subset of the conformational states that make up the activation pathway in Shaker channels. First, the location of residue 283 at hyperpolarized and depolarized potentials was inferred by substituting a cysteine at that position and determining its reactivity with hydrophilic, sulfhydryl-specific probes. The results indicate that position 283 reacts with extracellularly applied sulfhydryl reagents with similar rates at both hyperpolarized and depolarized potentials. We conclude that E283 is located near the extracellular surface of the protein in both resting and activated conformations. Second, we studied the functional phenotypes of double charge reversal mutations between positions 283 and 368 and between 283 and 371 to gain insight into the conformations in which these positions approach each other most closely. We found that combining charge reversal mutations at positions 283 and 371 stabilized an activated conformation of the channel, and dramatically slowed transitions into and out of this state. In contrast, charge reversal mutations at positions 283 and 368 stabilized a closed conformation, which by virtue of the inferred position of 368 corresponds to a partially activated (intermediate) closed conformation. From these results, we propose a preliminary model for the rearrangement of structural interactions of the voltage sensor during activation of Shaker K(+) channels.     

Functional interactions at the interface between voltage-sensing and pore domains in the Shaker K(v) channel

Voltage-activated potassium (K(v)) channels contain a central pore domain that is partially surrounded by four voltage-sensing domains. Recent X-ray structures suggest that the two domains lack extensive protein-protein contacts within presumed transmembrane regions, but whether this is the case for functional channels embedded in lipid membranes remains to be tested. We investigated domain interactions in the Shaker K(v) channel by systematically mutating the pore domain and assessing tolerance by examining channel maturation, S4 gating charge movement, and channel opening. When mapped onto the X-ray structure of the K(v)1.2 channel the large number of permissive mutations support the notion of relatively independent domains, consistent with crystallographic studies. Inspection of the maps also identifies portions of the interface where residues are sensitive to mutation, an external cluster where mutations hinder voltage sensor activation, and an internal cluster where domain interactions between S4 and S5 helices from adjacent subunits appear crucial for the concerted opening transition.     

On the structural basis for ionic selectivity among Na+, K+, and Ca2+ in the voltage-gated sodium channel.

Voltage-sensitive sodium channels and calcium channels are homologous proteins with distinctly different selectivity for permeation of inorganic cations. This difference in function is specified by amino acid residues located within P-region segments that link presumed transmembrane elements S5 and S6 in each of four repetitive Domains I, II, III, and IV. By analyzing the selective permeability of Na+, K+, and Ca2+ in various mutants of the mu 1 rat muscle sodium channel, the results in this paper support the concept that a conserved motif of four residues contributed by each of the Domains I-IV, termed the DEKA locus in sodium channels and the EEEE locus in calcium channels, determines the ionic selectivity of these channels. Furthermore, the results indicate that the Lys residue in Domain III of the sodium channel is the critical determinant that specifies both the impermeability of Ca2+ and the selective permeability of Na+ over K+. We propose that the alkylammonium ion of the Lys(III) residue acts as an endogenous cation within the ion binding site/selectivity filter of the sodium channel to tune the kinetics and affinity of inorganic cation binding within the pore in a manner analogous to ion-ion interactions that occur in the process of multi-ion channel conduction.     

Amino acid residues outside of the pore region contribute to N-type calcium channel permeation

It is widely believed that the selectivity of voltage-dependent calcium channels is mainly controlled by amino acid residues contained within four p-loop motifs forming the pore of the channel. An examination of the amino acid sequences of high voltage-activated calcium channels reveals that their domain III S5-H5 regions contain a highly conserved motif with homology to known EF hand calcium binding proteins, hinting that this region may contribute to channel permeation. To test this hypothesis, we used site-directed mutagenesis to replace three conserved negatively charged residues in the N-type calcium channel alpha1B subunit (Glu-1321, Asp-1323, and Glu-1332) with positively charged amino acids (lysine and arginine) and studied their effect on ion selectivity using whole cell and single channel patch clamp recordings. Whereas the wild type channels conducted barium much more effectively than calcium, the mutant displayed nearly equal permeabilities for these two ions. Individual replacement of residue 1332 or a double substitution of residues 1321 and 1323 with lysine and arginine, respectively, were equally effective. Disruption of the putative EF hand motif through replacement of the central glycine residue (1326) with proline resulted in a similar effect, indicating that the responses observed with the triple mutant were not due to changes in the net charge of the channel. Overall, our data indicate that residues outside of the narrow region of the pore have the propensity to contribute to calcium channel permeation. They also raise the possibility that interactions of calcium ions with a putative calcium binding domain at the extracellular side of the channel may underlie the differential permeabilities of the channel for barium and calcium ions.     

Open-and-shut cases in coiled-coil assembly: alpha-sheets and alpha-cylinders

The coiled coil is a ubiquitous protein-folding motif. It generally is accepted that coiled coils are characterized by sequence patterns known as heptad repeats. Such patterns direct the formation and assembly of amphipathic alpha-helices, the hydrophobic faces of which interface in a specific manner first proposed by Crick and termed "knobs-into-holes packing". We developed software, SOCKET, to recognize this packing in protein structures. As expected, in a trawl of the protein data bank, we found examples of canonical coiled coils with a single contiguous heptad repeat. In addition, we identified structures with multiple, overlapping heptad repeats. This observation extends Crick's original postulate: Multiple, offset heptad repeats help explain assemblies with more than two helices. Indeed, we have found that the sequence offset of the multiple heptad repeats is related to the coiled-coil oligomer state. Here we focus on one particular sequence motif in which two heptad repeats are offset by two residues. This offset sets up two hydrophobic faces separated by approximately 150 degrees -160 degrees around the alpha-helix. In turn, two different combinations of these faces are possible. Either similar or opposite faces can interface, which leads to open or closed multihelix assemblies. Accordingly, we refer to these two forms as alpha-sheets and alpha-cylinders. We illustrate these structures with our own predictions and by reference to natural variants on these designs that have recently come to light.     

Roles of molecular regions in determining differences between voltage dependence of activation of CaV3.1 and CaV1.2 calcium channels

Voltage-dependent calcium channels are classified into low voltage-activated and high voltage-activated channels. We have investigated the molecular basis for this difference in voltage dependence of activation by constructing chimeras between a low voltage-activated channel (Ca(V)3.1) and a high voltage-activated channel (Ca(V)1.2), focusing on steady-state activation properties. Wild type and chimeras were expressed in oocytes, and two-electrode voltage clamp recordings were made of calcium channel currents. Replacement of domains I, III, or IV of the Ca 3.1 channel with the corresponding domain of Ca(V)1.2 led (V)to high voltage-activated channels; for these constructs the current/voltage (I/V) curves were similar to those for Ca(V)1.2 wild type. However, replacement of domain II gave only a small shift to the right of the I/V curve and modulation of the activation kinetics but did not lead to a high voltage-activating channel with an I/V curve like Ca 1.2. We also investigated the role of the voltage sensor (V)S4 by replacing the S4 segment of Ca(V)3.1 with that of Ca 1.2. For domain I, there was no shift in the I/V curve (V)as compared with Ca(V)3.1, and there were relatively small shifts to the right for domains III and IV. Taken together, these results suggest that domains I, III, and IV (rather than domain II) are apparently critical for channel opening and, therefore, contribute strongly to the difference in voltage dependence of activation between Ca 3.1 and Ca(V)1.2. However, the S4 segments in domains I, (V)III, and IV did not account for this difference in voltage dependence.     

S4 movement in a mammalian HCN channel

Hyperpolarization-activated, cyclic nucleotide-gated ion channels (HCN) mediate an inward cation current that contributes to spontaneous rhythmic firing activity in the heart and the brain. HCN channels share sequence homology with depolarization-activated Kv channels, including six transmembrane domains and a positively charged S4 segment. S4 has been shown to function as the voltage sensor and to undergo a voltage-dependent movement in the Shaker K+ channel (a Kv channel) and in the spHCN channel (an HCN channel from sea urchin). However, it is still unknown whether S4 undergoes a similar movement in mammalian HCN channels. In this study, we used cysteine accessibility to determine whether there is voltage-dependent S4 movement in a mammalian HCN1 channel. Six cysteine mutations (R247C, T249C, I251C, S253C, L254C, and S261C) were used to assess S4 movement of the heterologously expressed HCN1 channel in Xenopus oocytes. We found a state-dependent accessibility for four S4 residues: T249C and S253C from the extracellular solution, and L254C and S261C from the internal solution. We conclude that S4 moves in a voltage-dependent manner in HCN1 channels, similar to its movement in the spHCN channel. This S4 movement suggests that the role of S4 as a voltage sensor is conserved in HCN channels. In addition, to determine the reason for the different cAMP modulation and the different voltage range of activation in spHCN channels compared with HCN1 channels, we constructed a COOH-terminal-deleted spHCN. This channel appeared to be similar to a COOH-terminal-deleted HCN1 channel, suggesting that the main functional differences between spHCN and HCN1 channels are due to differences in their COOH termini or in the interaction between the COOH terminus and the rest of the channel protein in spHCN channels compared with HCN1 channels.     

Voltage clamp fluorimetry reveals a novel outer pore instability in a mammalian voltage-gated potassium channel

Voltage-gated potassium (Kv) channel gating involves complex structural rearrangements that regulate the ability of channels to conduct K(+) ions. Fluorescence-based approaches provide a powerful technique to directly report structural dynamics underlying these gating processes in Shaker Kv channels. Here, we apply voltage clamp fluorimetry, for the first time, to study voltage sensor motions in mammalian Kv1.5 channels. Despite the homology between Kv1.5 and the Shaker channel, attaching TMRM or PyMPO fluorescent probes to substituted cysteine residues in the S3-S4 linker of Kv1.5 (M394C-V401C) revealed unique and unusual fluorescence signals. Whereas the fluorescence during voltage sensor movement in Shaker channels was monoexponential and occurred with a similar time course to ionic current activation, the fluorescence report of Kv1.5 voltage sensor motions was transient with a prominent rapidly dequenching component that, with TMRM at A397C (equivalent to Shaker A359C), represented 36 +/- 3% of the total signal and occurred with a tau of 3.4 +/- 0.6 ms at +60 mV (n = 4). Using a number of approaches, including 4-AP drug block and the ILT triple mutation, which dissociate channel opening from voltage sensor movement, we demonstrate that the unique dequenching component of fluorescence is associated with channel opening. By regulating the outer pore structure using raised (99 mM) external K(+) to stabilize the conducting configuration of the selectivity filter, or the mutations W472F (equivalent to Shaker W434F) and H463G to stabilize the nonconducting (P-type inactivated) configuration of the selectivity filter, we show that the dequenching of fluorescence reflects rapid structural events at the selectivity filter gate rather than the intracellular pore gate.     

Phospholipid membrane-interaction of a peptide from S4 segment of KvAP K(+) channel and the influence of the positive charges and an identified heptad repeat in its interaction with a S3 peptide

In order to examine the ability of S3 and S4 segments of a Kv channel to interact with each other, two wild type short peptides derived from the S3 and S4 segments of KvAP channel were synthesized. Additionally, to evaluate the role of positive charges and an identified heptad repeat in the S4 segment, two S4 mutants of the same size as the S4 peptide, one with substitution of two leucine residues in the heptad repeat sequence by two alanine residues and in the other two arginine residues replaced by two glutamines residues were synthesized. Our results show that only the wild type S4 peptide, but not its mutants, self-assembled and permeabilized negatively charged phospholipid vesicles. The S3 peptide showed lesser affinity toward the same kind of lipid vesicles and localized onto its surface. However, the S3 peptide interacted only with S4 wild type peptide, but not with S4 mutants, and altered its localization onto the phospholipid membrane with increased resistance against the proteolytic enzyme, proteinase-k, in the presence of the S4 peptide. The results demonstrate that the selected, synthetic S3 and S4 segments possess the required amino acid sequences to interact with each other and show that the positive charges and the identified heptad repeat in S4 contribute to its assembly and interaction with S3 segment.     

Molecular template for a voltage sensor in a novel K+ channel. II. Conservation of a eukaryotic sensor fold in a prokaryotic K+ channel

KvLm, a novel bacterial depolarization-activated K(+) (Kv) channel isolated from the genome of Listeria monocytogenes, contains a voltage sensor module whose sequence deviates considerably from the consensus sequence of a Kv channel sensor in that only three out of eight conserved charged positions are present. Surprisingly, KvLm exhibits the steep dependence of the open channel probability on membrane potential that is characteristic of eukaryotic Kv channels whose sensor sequence approximates the consensus. Here we asked if the KvLm sensor shared a similar fold to that of Shaker, the archetypal eukaryotic Kv channel, by examining if interactions between conserved residues in Shaker known to mediate sensor biogenesis and function were conserved in KvLm. To this end, each of the five non-conserved residues in the KvLm sensor were mutated to their Shaker-like charged residues, and the impact of these mutations on the voltage dependence of activation was assayed by current recordings from excised membrane patches of Escherichia coli spheroplasts expressing the KvLm mutants. Conservation of pairwise interactions was investigated by comparison of the effect of single mutations to the impact of double mutations presumed to restore wild-type fold and voltage sensitivity. We observed significant functional coupling between sites known to interact in Shaker Kv channels, supporting the notion that the KvLm sensor largely retains the fold of its eukaryotic homologue.