Substrate interaction with recombinant amidase from Pseudomonas aeruginosa during biocatalysis

The interaction of a variety of substrates with Pseudomonas aeruginosa native amidase (E.C. 3.5.1.4), overproduced in an Escherichia coli strain, was investigated using difference FTIR spectroscopy. The amides used as substrates showed an increase in hydrogen bonding upon association in multimers, which was not seen with esters. Evidence for an overall reduction or weakening of hydrogen bonding while amide and ester substrates are interacting with the enzyme is presented. The results describe a spectroscopic approach for analysis of substrate–amidase interaction and in situ monitoring of the hydrolysis and transferase reaction when amides or esters are used as substrates.     

Effects of subzero temperatures on the kinetics of protease catalyzed dipeptide synthesis in organic media

A depeptide synthesis was drastically influenced by the reaction temperature, in the range from -30 degrees to 25 degrees C. This article shows the kinetic reasons of this effect. alpha-Chymotrypsin was immobilized on celite and used in four different water-miscible solvents containing small amounts of water-miscible solvents containing small amounts of water. The reaction studied was the aminolysis of N-acetyl-L-phenylalanine ethyl ester (Ac-PheOEt) with L-alaninamide (Ala-NH(2)) and water for the acylenzyme complex, the nucleophile was favoured by low reaction temperatures. This effect (quantified as p-values) was observed in all four solvents, and it was greatest in acetonitrile and tetrahydrofuran. The esterase and amidase activities of the enzyme were studies using AcPheOEt and N-acetyl-L-phenylalanyl-L-ananinamide (AcPheAla-NH(2)) as substrates. The Michaelis-Menten parameters, K(m,app) and V(max), were determined for ester hydrolysis and dipeptide hydrolysis. Both K(m,app) and V(max) tended to increase with increasing temperature. Secondary hydrolysis was reduced at subzero temperatures because ester hydrolysis was favoured in relation to depeptide hydrolysis. Depeptide synthesis was thus favored by low temperatures in two ways: first, in the competition between the nucleophile and water for the acyl enzyme; and, second, in the competition between the ester substrate and the peptide substrate for the free enzyme. As a result, in acetonitrile containing 10% water, the maximal yield was 99% at -20%C compared with 84% at 25 degrees C. (c) 1995 John Wiley & Sons, Inc.     

Formation of a Chiral Hydroxamic Acid with an Amidase from Rhodococcus erythropolis MP50 and Subsequent Chemical Lossen Rearrangement to a Chiral Amine

The amidase from Rhodococcus erythropolis MP50 demonstrated, in the presence of hydroxylamine, acyltransferase activity and catalyzed the formation of hydroxamates from amides and hydroxylamine. The rates of acyltransferase activity of the purified amidase for the substrates acetamide, phenylacetamide, and 2-phenylpropionamide were higher than the corresponding rates for the hydrolysis reactions. With the substrate 2-phenylpropionamide the hydrolysis reaction and the acyltransferase activity were highly enantioselective. The optically active 2-phenylpropionhydroxamate was converted by a chemical Lossen rearrangement in an aqueous medium into the enantiopure S-1-phenylethylamine.     

Preparation of oligomeric beta-glycosides from cellulose and hemicellulosic polysaccharides via the glycosyl transferase activity of a trichoderma reesei cellulase

Oligoglycosyl (allyl, 2,3-dihydroxypropyl, ethyl, 2-hydroxyethyl, and methyl) beta-glycosides were generated by endo -transglycosylation reactions catalyzed by commercially available Trichoderma reesei cellulase. A polymeric donor substrate (xyloglucan or cellulose) was incubated with the enzyme in an aqueous solution containing 20% of the acceptor alcohol (allyl alcohol, glycerol, ethanol, ethylene glycol, and methanol, respectively). The products of these reactions included oligomeric alkyl beta-glycosides and reducing oligosaccharides. The high yield of alkyl beta-glycosides may be explained by the resistance of the xyloglucan beta-glycosides to cellulase-mediated hydrolysis. The resistance of the oligoxyloglucan beta-glycosides to endo glucanase catalyzed hydrolysis supports the hypothesis that productive binding of the glycan substrate depends on its interaction with enzyme subsites on both sides of the cleavage point, leading to distortion of the ring geometry of the residue whose glycosidic bond is cleaved. Oligoxyloglucan beta-glycosides were purified by a combination of gel-permeation and reversed-phase HPLC and were structurally characterized by MS and NMR spectroscopy. These results demonstrate that novel oligosaccharide beta-glycosides can be efficiently produced by enzyme-catalyzed fragmentation/transglycosylation reactions starting with a polysaccharide donor substrate. This class of reactions may represent a convenient source of beta-glycosides to be used as synthons for the rapid synthesis of complex glycans.     

The aminopeptidase from Aeromonas proteolytica can function as an esterase

The aminopeptidase from Aeromonas proteolytica (AAP) can catalyze the hydrolysis of L-leucine ethyl ester ( L-Leu-OEt) with a rate of 96 +/- 5 s-1 and a Km of 700 microM. The observed turnover number for L-Leu-OEt hydrolysis by AAP is similar to that observed for peptide hydrolysis, which is 67 +/- 5 s-1. The k(cat) values for the hydrolysis of L-Leu-OEt and L-leucine- p-nitroanilide ( L- pNA) catalyzed by AAP were determined at different pH values under saturating substrate concentrations. Construction of an Arrhenius plot from the temperature dependence of AAP-catalyzed ester hydrolysis indicates that the rate-limiting step does not change as a function of temperature and is product formation. The activation energy ( Ea) for the activated ES ester complex is 13.7 kJ mol-1, while the enthalpy and entropy of activation at 25 degrees C calculated over the temperature range 298-338 K are 11.2 kJ mol-1 and -175 J K-1 mol-1, respectively. The free energy of activation at 25 degrees C was found to be 63.4 kJ mol-1. The enthalpy of ionization was also measured and was found to be very similar for both peptide and ester substrates, yielding values of 20 kJ mol-1 for L-Leu-OEt and 25 kJ mol-1 for L- pNA. For peptide and L-amino acid ester cleavage reactions catalyzed by AAP, and 6.07, respectively. Proton inventory data suggest that two protons are transferred in the rate-limiting step of ester hydrolysis while only one is transferred in peptide hydrolysis. The combination of these data with the available X-ray crystallographic, kinetic, spectroscopic, and thermodynamic data for AAP provides new insight into the catalytic mechanism of AAP.     

Artificial metalloenzymes based on protein cavities: Exploring the effect of altering the metal ligand attachment position by site directed mutagenesis

In an effort to construct catalysts with enzyme-like properties, we are employing a small, cavity-containing protein as a scaffold for the attachment of catalytic groups. In earlier work we demonstrated that a phenanthroline ligand could be introduced into the cavity of the protein ALBP and used to catalyze ester hydrolysis. To examine the effect of positioning the phenanthroline catalyst at different locations wthin the protein cavity, three new constucts — Phen60, Phen72 and Phen104 — were prepared. Each new conjugate was characterized by UV/vis spectroscopy, fluorescence spectroscopy, guanidine hydrochloride denaturation, gel filtration chromatography, and CD spectroscopy to confirm the preparation of the desired contruct. Analysis of reactions containing Ala-OiPr showed that Phen60 catalyzed ester hydrolysis with less selectivity than ALBP-Phen while Phen72 promoted this same reaction with higher selectivity. Reactions with Tyr-OMe were catalyzed with higher selectivity by Phen60 and more rapidly by Phen104. These results demonstrate that both the rates and selectivities of hydrolysis reactions catalyzed by these constructs are dependent on the precise site of attachment of the metal ligand within the protein cavity.     

Penicillin amidase-catalysed transfer of low specific acyl moiety. Synthesis of 7-benzoxazolonylacetamido desacetoxycephalosporanic acid.

The methyl ester of 2-benzoxazolon-3-yl-acetic acid was used as an acyl donor in the penicillin amidase-catalysed transfer reaction to 7-aminodesacetoxycephalosporanic acid. The synthesis of 7-(2-benzoxazolon-3-yl-acetamido)-desacetoxycephalosporanic acid was carried out as a kinetically controlled reaction. A characteristic feature of this system is that the benzoxazolone derivatives are very low specific substrates for penicillin amidase (the kcat/Km values for their hydrolysis were shown to be 10(5)-fold lower compared to the corresponding values for phenylacetyl derivatives). Nevertheless, penicillin amidase proved to be an effective catalyst for the synthesis of these new cephem derivatives (50% yield for 6 h). The reason is the observed unusually high value for the transferase-hydrolase activity ratio. The determined value for (k3'/k3)app = 120,000 implies that in this case of low specific acyl moiety, penicillin amidase acts more like a transferase than a hydrolase. The maximum yield has been increased up to 70% by lowering the reaction temperature and stepwise feeding of the reaction medium with the acyl component. The results obtained extend the potential of the penicillin amidase as a catalyst for the synthesis of a new group of biologically active cephem derivatives.     

Alteration of the catalytic efficiency of penicillin amidase from Escherichia coli

Ampicillin and cephalexin are beta-lactam antibiotics that are synthesized by the condensation of D-(-)-alpha-aminophenylacetic acid with 6-aminopenicillanic acid or 7-aminodeacetoxycephalosporanic acid, respectively. The rates at which the penicillin amidase of Escherichia coli catalyzes these reactions are too low to be of practical use. The objective of this study was to determine whether it is possible to alter the substrate specificity of penicillin amidase and select enzymes that efficiently hydrolyze substrates with alpha-aminophenylacetyl moieties at low pH, at which the alpha-amino group is nearly completely protonated. In this study, D-(-)-alpha-aminophenylacetyl-(L)-leucine (APAL) was used as a substrate analog of ampicillin and cephalexin. The gene for the penicillin amidase of E. coli ATCC 11105 was cloned and transferred to a leucine auxotroph of E. coli; numerous amidase mutants were selected by their ability to cleave APAL and provide leucine for growth in low-pH medium. The plasmid encoding one of the mutant amidases (pA135) was used to transform naive cells, and transformants that expressed the mutant amidase were shown to grow more rapidly in medium at pH 6.5 containing 0.1 mM APAL as the sole leucine source than did cells with the wild-type amidase. The mutant amidase was purified, and the second-order rate constant (kcat/Km) for APAL hydrolysis at pH 6.5 was found to be 10-fold greater than the rate observed with the wild-type enzyme. The difference between the rates of APAL hydrolysis by the mutant and wild-type amidases increased as the pH of the reactions decreased.(ABSTRACT TRUNCATED AT 250 WORDS)     

Alteration of the catalytic efficiency of penicillin amidase from Escherichia coli.

Ampicillin and cephalexin are beta-lactam antibiotics that are synthesized by the condensation of D-(-)-alpha-aminophenylacetic acid with 6-aminopenicillanic acid or 7-aminodeacetoxycephalosporanic acid, respectively. The rates at which the penicillin amidase of Escherichia coli catalyzes these reactions are too low to be of practical use. The objective of this study was to determine whether it is possible to alter the substrate specificity of penicillin amidase and select enzymes that efficiently hydrolyze substrates with alpha-aminophenylacetyl moieties at low pH, at which the alpha-amino group is nearly completely protonated. In this study, D-(-)-alpha-aminophenylacetyl-(L)-leucine (APAL) was used as a substrate analog of ampicillin and cephalexin. The gene for the penicillin amidase of E. coli ATCC 11105 was cloned and transferred to a leucine auxotroph of E. coli; numerous amidase mutants were selected by their ability to cleave APAL and provide leucine for growth in low-pH medium. The plasmid encoding one of the mutant amidases (pA135) was used to transform naive cells, and transformants that expressed the mutant amidase were shown to grow more rapidly in medium at pH 6.5 containing 0.1 mM APAL as the sole leucine source than did cells with the wild-type amidase. The mutant amidase was purified, and the second-order rate constant (kcat/Km) for APAL hydrolysis at pH 6.5 was found to be 10-fold greater than the rate observed with the wild-type enzyme. The difference between the rates of APAL hydrolysis by the mutant and wild-type amidases increased as the pH of the reactions decreased.(ABSTRACT TRUNCATED AT 250 WORDS)     

The effect of ethanol on the kinetics of lipase-mediated enantioselective esterification of 4-methyloctanoic acid and the hydrolysis of its ethyl ester.

The Novozym 435(R) catalyzed esterification and hydrolysis reactions of 4-methyloctanoic acid (ethyl ester) were investigated. In both the hydrolysis and esterification reactions, the increase of ethanol concentration led to an increase in enantiomeric ratio (E). For hydrolysis of the ethyl ester, the E-value increased from 5.5 [0% (v/v) EtOH] up to 12 [20% (v/v) EtOH]. In case of esterification, the E-value was already 16 [14% (v/v) EtOH] and rose to 57 [73% (v/v) EtOH]. When combining these results of esterification and hydrolysis, an enantiomeric ratio of 350 can be estimated for the sequential kinetic resolution of 4-methyloctanoic acid. In this way, enantiopure 4-methyloctanoic acid could be obtained after two consecutive reaction steps.     

The nature of differences in amidase and esterase activities of some acyltrypsins]

Specific trypsin substrates (esters, anilides, amides, peptides) were shown to accelerate deacetylation of monoacetylated trypsin. The amidase activity of monoacetyl-, monopropyonyl-, and tetraformyl-trypsin was not manifested if the amidase activity of native enzyme was suppressed in these preparations by the ester substrates (benzoylarginine ethyl ester or p-nitrophenyl acetate). Therefore the differences in the residual amidase and esterase activities of these acylated trypsin preparations found earlier did not contradict the universality of the acylenzyme mechanism. These differences are due to the strong deacylating effect of specific substrate in its complex with the enzyme modified with nonspecific acyl residue. The latter fact is suggested to be an experimental confirmation of the "induced fit" hypothesis.     

2-Methylacetoacetyl-coenzyme A reductase from Ascaris muscle: purification and properties

2-Methylacetoacetyl-CoA and 3-keto-2-methyl pentanoyl-CoA have been proposed to be intermediates in the synthesis of 2-methylbutyrate and 2-methylvalerate, respectively, by Ascaris lumbricoides muscle. These volatile acids are major fermentation products of Ascaris metabolism. 2-Methylacetoacetyl-CoA reductase has been purified 532-fold from Ascaris muscle to yield a homogeneous preparation which contained a single protein species as observed on discontinuous polyacrylamide gel electrophoresis in the presence of sodium dodecyl sulfate. The purification procedure utilized subcellular fractionation, affinity chromatography on NAD+ agarose, and ion-exchange chromatography on DEAE-cellulose. A constant activity ratio for ethyl 2-methylacetoacetate and acetoacetyl-CoA was observed during purification, indicating that the same enzyme catalyzed both reactions. In addition, the purified protein catalyzed the NADH-dependent reduction of ethyl-3-keto-2-methyl pentanoate at essentially the same rate as it did ethyl 2-methylacetoacetate. The purified enzyme is a basic protein with an isoelectric point of 8.45 at 4 degrees C. The molecular weight of the native protein (Mr = 64,000 by exclusion chromatography) and the size of the subunit (Mr = 30,000 by dodecyl sulfate-polyacrylamide electrophoresis) indicate that the enzyme is composed of two subunits of the same molecular weight. Substrate-specificity studies, undertaken with the purified protein, demonstrated that the ethyl esters can substitute for the coenzyme A derivatives but this substitution results in an active substrate only when a branched 2-methyl group is present. The straight-chain ethyl ester is inactive. Kinetic constants for the substrates and nucleotides were determined. The role of the CoA esters as the physiological substrates for the Ascaris enzyme is substantiated. When assayed in the reductive direction with ethyl 2-methylacetoacetate as substrate, the activity of the purified enzyme was inhibited not only by coenzyme A as previously reported, but also by acetyl-CoA. The physiological implications of these inhibitions are discussed.     

Exploration of in vitro pro-drug activation and futile cycling by glutathione S-transferases: thiol ester hydrolysis and inhibitor maturation

In addition to glutathione (GSH) conjugating activity, glutathione S-transferases (GSTs) catalyze "reverse" reactions, such as the hydrolysis of GSH thiol esters. Reverse reactions are of interest as potential tumor-directed pro-drug activation strategies and as mechanisms for tissue redistribution of carboxylate-containing drugs. However, the mechanism and specificity of GST-mediated GSH thiol ester hydrolysis are uncharacterized. Here, the GSH thiol esters of ethacrynic acid (E-SG) and several nonsteroidal antiinflammatory agents have been tested as substrates with human GSTs. The catalytic hydrolysis of these thiol esters appears to be a general property of GSTs. The hydrolysis of the thiol ester of E-SG was studied further with GSTA1-1 and GSTP1-1, as a model pro-drug with several possible fates for the hydrolysis products: competitive inhibition, covalent enzyme adduction, and sequential metabolism. In contrast to hydrolysis rates, significant isoform-dependent differences in the subsequent fate of the products ethacrynic acid and GSH were observed. At low [E-SG], only the GSTP1-1 efficiently catalyzed sequential metabolism, via a dissociative mechanism.     

Miscibility of bioerodible polyphosphazene/poly(lactide-co-glycolide) blends

We have previously demonstrated the feasibility of blending bioerodible polyphosphazenes with poly(lactide-co-glycolide) (PLGA) to form versatile polymeric materials with altered bioerosion properties. These studies demonstrated the effective neutralization of the acidic degradation products of PLGA by the polyphosphazene hydrolysis products. In the present study, five new polymers of dipeptide polyphosphazenes poly[(ethyl glycinato)x(glycyl-ethyl glycinato)yphosphazene] and novel blends of these polyphosphazenes with poly(lactide-co-glycolide) (PLGA) were synthesized and fabricated. The miscibility was analyzed using differential scanning calorimetry and scanning electron microscopy. Hydrogen bonding within the blends was assessed by attenuated total reflectance infrared spectroscopy. The phosphazene component of the blend contained varying ratios of the glycyl-glycine ethyl ester to the glycine ethyl ester. Poly[(ethyl glycinato)0.5(glycine ethyl glycinato)1.5phosphazene formed completely miscible blends with PLGA (50:50) and PLGA (85:15). This is ascribed to the multiple hydrogen-bonding sites within the side groups of the polyphosphazene. The components of the blend act as plasticizers for each other because a glass transition temperature for each blend was detected at a lower temperature than for each individual polymer. A hydrolysis study showed that unblended solid poly[(ethyl glycinato)0.5(glycyl ethyl glycinato)1.5phosphazene] hydrolyzed in less than 1 week. However, the blends degraded at a slower rate than both parent polymers. This is attributed to the buffering capacity of the polyphosphazene hydrolysis products, which increases the pH of the degradation media from 2.5 to 4, thereby slowing the degradation rate of PLGA.     

Effect of frying time on free fatty acid generation and esterification rate in Aspergillus sp.-catalyzed transesterification of cottonseed oil

Abstract

The present study was carried out to examine the effect of different frying times of edible oil on the extent of transesterification catalyzed by the whole-cell biocatalyst, Aspergillus (RBD01). Cottonseed oil was chosen as a conventional and cost-effective edible oil used commercially in India. The results showed that increased frying time of the oil decreased the extent of the transesterification reaction and hence alkyl ester production. Nearly complete (>98%) transesterification to ethyl alcohol was observed with used oil containing a free fatty acid (FFA) content of 3.7%, whereas beyond an FFA content of 4.0% the yield was reduced. Biocatalyzed hydrolysis (in the absence of the ethyl alcohol acceptor) of used frying oil resulted in decreasing yield of FFA from 84.0% to 27.6% with increasing frying time. With fried oil capable of a hydrolysis yield of 82–41% FFA, transesterification reactions were nearly complete. With the lower hydrolysis yields of 38–27% FFA, the transesterified ethyl ester yield decreased to 61–51%. These observations indicate that factors other than the presence of FFA and moisture influence the biocatalytic transesterification of used cooking oils.     

Course of pH during the formation of amoxicillin by a suspension-to-suspension reaction

Amoxicillin can be produced in an enzymatic suspension-to-suspension reaction in which the substrate(s) and product(s) are mainly present as solid particles, while the reaction takes place in the liquid phase. During these suspension-to-suspension reactions different subprocesses take place, such as dissolution/crystallization of substrates and products, enzymatic synthesis of the product(s), and undesired enzymatic hydrolysis of substrates and/or products. All these subprocesses are influenced by pH and also influence the pH because the reactants are weak electrolytes. This paper describes a quantitative model for predicting pH and concentrations of reactants during suspension-to-suspension reactions. The model is based on mass and charge balances, pH-dependent solubilities of the reactants, and enzyme kinetics. For the validation of this model, the kinetically controlled synthesis of amoxicillin from 6-aminopenicillanic acid and D-(p)hydroxyphenylglycine methyl ester was studied. The pH and the dissolved concentrations took a very different course at different initial substrate amounts. This was described quite reasonably by the model. Therefore, the model can be used as a tool to optimize suspension-to-suspension reactions of weak electrolytes.     

Crosslinking of imprinted proteases to maintain a tailor-made substrate selectivity in aqueous solutions

A covalent method to keep imprinted properties of proteins stable in aqueous as well as in organic environment is described. To stabilize the ligand induced acceptance for D-configured substrates by alpha-chymotrypsin or subtilisin Carlsberg, each protein was first vinylated by acylation with itaconic anhydride. Then, the tailoring of the derivatized proteins by precipitation in the presence of N-acetyl-D-tryptophan from an aqueous medium with 1-propanol, and the subsequent crosslinking of the enzyme preparations with ethylene glycol dimethacrylate in cyclohexane was carried out. The crosslinked imprinted proteins (CLIPs) obtained catalyzed the hydrolysis of N-acetyl-D-tryptophan ethyl ester in phosphate buffer and the corresponding back reaction in cyclohexane, respectively. The repeated use of CLIP-alpha-chymotrypsin in D-ester hydrolysis was demonstrated. Furthermore, this particular CLIP-alpha-chymotrypsin showed no loss in activity when it subsequently was used in the synthesis of N-acetyl-D-tryptophan ethyl ester in cyclohexane again. In the case of D-ester hydrolysis the reaction rate acceleration (k(enz)/k(nonenz)) was in the same order of magnitude of about 10(4)-10(5) mM(-1) for the two CLIP-proteases. The results suggest that enzymes tailored by imprinting technique do not lose their induced "new" property in the presence of water when they are prepared according to the described vinylation/crosslinking method (CLIP technique).     

The reaction of tertiary amino alcohols with active esters: I. Acylation and deacylation steps

The reactions of triethanolamine and four other tertiary amino alcohols with six active ester substrates were studied in the pH range 6–10 at 30°C. The reaction products were in all cases the respective O-acyl-amino alcohols. Analysis of the effects of substituents in the leaving group as well as in the acyl moiety of the substrates showed that the ester product was formed by direct attack of the nucleophilic hydroxyl group. Comparison with reactions of tertiary amines with the same substrates supports this conclusion. The reactions of tertiary amino alcohols were also compared with those of zwitterionic quaternary amino alcohols and 3-quinuclidinol, a “rigid” tertiary amino alcohol. On the basis of these comparisons, it is proposed that one of the pathways for the predominant effect of the neutral species of tertiary amino alcohols involves intramolecular general base assistance by the tertiary amino group to the nucleophilic attack of the hydroxylic oxygen on the substrate. The contribution of this pathway to the rate of reaction is evaluated.In several systems the first product of the reaction, an O-acyl-amino alcohol, undergoes relatively rapid deacylation, the overall reaction being thus hydrolysis of active esters, catalyzed by the amino alcohol via an acylation-deacylation mechanism.     

Metabolism of monoacylglycerol and diacylglycerol by enzyme preparations from spinach leaves

Acetone powders prepared from a 20,000g participate preparation from spinach leaf catalyzed several reactions involving monoacylglycerol and diacylglycerol. When these substrates were presented as Triton X-100-mixed micelles, diacylglycerol gave rise to free fatty acids, monoacylglycerol, triacylglycerols, and steryl esters, and in the presence of ethanol, small amounts of ethyl esters of fatty acid. Monoacylglycerol gave rise to free fatty acids and diacylglycerol, and in the presence of ethanol, large amounts of ethyl esters of fatty acid. In the presence of bovine serum albumin, the conversion of monoacylglycerol to free fatty acid was retarded. In the presence of bovine serum albumin, steryl ester was an important product from diacylglycerol. The system containing Triton X-100-mixed micelles and bovine serum albumin permitted analysis of reaction products which showed diacylglycerol to be an acyl donor in steryl ester biosynthesis. All reactions observed in the mixed micelle system were transacylation reactions involving various acceptors: dipalmitoylglycerol → monopalmitoylglycerol + palmitate; monopalmitoylglycerol → glycerol + palmitate; dipalmitoylglycerol + sterol → monopalmitoylglycerol + steryl palmitate; monopalmitoylglycerol + ethanol → ethyl palmitate + glycerol; monopalmitoylglycerol → dipalmitoylglycerol (+glycerol); dipalmitoylglycerol → tripalmitoylglycerol (+monopalmitoylglycerol).     

Enzyme catalyzed biotransformations in aqueous two-phase systems with precipitated substrate and/or product

Biotransformations catalyzed by free and immobilized enzymes have been carried out in aqueous suspensions with up to 25% (w/w) precipitated substrate or product. For the kinetically controlled synthesis of N-Acetyl-Tyr-Arg-NH(2) with up to 0.8 M insoluble activated substrate N-Acetyl-TyrOEt catalyzed by alpha-chymotrypsin (EC3.4.21.1) the dipeptide yield was found to be >90%. This and the space-time yields were higher than those observed for one-phase aqueous systems and much higher than in systems where the insoluble substrate had been solubilized by addition of organic solvents. In the equilibrium controlled hydrolysis of 0.4 M D-phenylglycine-amide catalyzed by immobilized penicillin amidase (EC 3.5.1.11) the product precipitates. The enzyme immobilized in the support with the smallest pores could be reused without reduction in the rate due to precipitation in the pores. This decreases the number of immobilized enzyme molecules that can be used as biocatalysts. The latter was observed for supports with larger pores as the solubility decreases with increasing particle size. These results demonstrate that biotransformations with insoluble substrates or products using free or immobilized enzymes can be easily carried out in aqueous two-phase systems, without organic solvents, provided that the pore sizes of the supports are sufficiently small and that the rate of mass transfer from the precipitated substrate is large. The latter increases with decreasing particle size. (c) 1995 John Wiley & Sons, Inc.