Synergism of natural and constructed wetlands in Beijing,China

An integrated wetland system (IWS) including constructed wetlands (CWs) and modified natural wetlands (NWs) for wastewater treatment to replenish water to wetlands located at the Beijing Wetland School (BWS) in Beijing, China, is presented in this paper. The synergistic effects of CWs and NWs on treated water quality are investigated. The IWS is proved to be an effective wastewater treatment technique and a better alternative to alleviate the water shortage for conservation of wetlands based on the monitoring data obtained from October 2007 to 2008. The results show that CWs and NWs play different roles in removing contaminants from wastewater. The COD removal efficiency in CWs is higher than that in modified NWs, whereas the modified NWs can compensate for the deficiency of CWs where a stable and sufficient rhizosphere is not fully formed in the start-up period. All removal rates of COD, TN, and TP in CWs and modified NWs vary from 50 to 70%, while the total removal rate of COD, TN, and TP in IWS is about 85–90%. The operational results show that the maximum area loading of organic pollutants in modified NWs (65 kg/ha d) is slightly higher than the empirical one (60 kg/ha d) recommended by USEPA (2000) for free water surface wetlands.     

Fate of heavy metals in vertical subsurface flow constructed wetlands treating secondary treated petroleum refinery wastewater in Kaduna,Nigeria

This study examined the performance of pilot-scale vertical subsurface flow constructed wetlands (VSF–CWs) planted with three indigenous plants, i.e. Typha latifolia, Cyperus alternifolius, and Cynodon dactylon, in removing heavy metals from secondary treated refinery wastewater under tropical conditions. The T. latifolia-planted VSF–CW had the best heavy metal removal performance, followed by the Cyperus alternifolius-planted VSF–CW and then the Cynodon dactylon-planted VSF–CW. The data indicated that Cu, Cr, Zn, Pb, Cd, and Fe were accumulated in the plants at all the three VSF–CWs. However, the accumulation of the heavy metals in the plants accounted for only a rather small fraction (0.09–16%) of the overall heavy metal removal by the wetlands. The plant roots accumulated the highest amount of heavy metals, followed by the leaves, and then the stem. Cr and Fe were mainly retained in the roots of T. latifolia, Cyperus alternifolius, and Cynodon dactylon (TF < 1), meaning that Cr and Fe were only partially transported to the leaves of these plants. This study showed that VSF–CWs planted with T. latifolia, Cyperus Alternifolius, and Cynodon dactylon can be used for the large-scale removal of heavy metals from secondary refinery wastewater.     

The use constructed wetlands with horizontal sub-surface flow for various types of wastewater

Constructed wetlands with horizontal sub-surface flow (HF CWs) have been used for wastewater treatment for more than 30 years. Most HF CWs have been designed to treat municipal or domestic wastewater. Nowadays, municipal HF CWs focus not only on common pollutants but also on special parameters such as pharmaceuticals, endocrine disruptive chemicals or linear alkylbenzensulfonates (LAS). At present, HF CWs are used to treat many other types of wastewater. Industrial applications include wastewaters from oil refineries, chemical factories, pulp and paper production, tannery and textile industries, abattoir, distillery and winery industries. In particular, the use of HF CWs is becoming very common for treatment of food-processing wastewaters (e.g., production and processing of milk, cheese, potatoes, sugar). HF constructed wetlands are also successfully used to treat wastewaters from agriculture (e.g., pig and dairy farms, fish farm effluents) and various runoff waters (agriculture, airports, highway, greenhouses, plant nurseries). HF CWs have also effectively been used to treat landfill leachate. Besides the use as a single unit, HF CWs are also used in combination with other types of constructed wetlands in hybrid systems.     

Changes in the bacterial community structure in two-stage constructed wetlands with different plants for industrial wastewater treatment

This study focused on the diversity of bacterial communities from two series of two-stage constructed wetlands (CWs) treating tannery wastewater, under different hydraulic conditions. Series were separately planted with Typha latifolia and Phragmites australis in expanded clay aggregates and operated for 31 months. The effect of plant species, hydraulic loading and unit stage on bacterial communities was addressed through bacterial enumeration and denaturating gradient gel electrophoresis (DGGE). Diverse and distinct bacterial communities were found in each system unit, which was related in part to the type of plant and stage position (first or second unit in the series). Numerical analysis of DGGE profiles showed high diversity in each unit with an even distribution of species. No clear relation was established between the sample collection time, hydraulic loading applied and the bacterial diversity.     

Environmental decision support systems: A new approach to support the operation and maintenance of horizontal subsurface flow constructed wetlands

This paper describes the development and operation of an Environmental Decision Support System (EDSS) to improve the operation and maintenance of horizontal subsurface-flow constructed wetlands (EDSS-maintenance). Constructed wetlands (CWs) allow wastewater treatment in a sustainable manner since they involve low energy consumption, low construction and functioning costs and low environmental impact. However, operation and maintenance activities are essential to guarantee reliability in CWs performance. The definition of operation and maintenance protocols depends on several quantitative and qualitative aspects such as wastewater treatment plant configuration, CW design, influent characteristics, sensitivity of the receiving media, etc. Bearing this in mind and considering the limited technical knowledge about CWs, the need for a new tool to support CW performance is clear. In this sense, EDSSs offer a new approach because they can tackle problems of complex and uncertain systems. The EDSS-maintenance provides operation and maintenance manuals specifically defined for every CW. To achieve it, the required knowledge was implemented within a rule-based system, which forms the backbone of the EDSS. Several features presented in this paper demonstrate how the EDSS-maintenance provides a proper platform to support the necessary collaborative work in the ecological engineering problem of horizontal subsurface flow CWs operation and maintenance.     

Fate of metallic engineered nanomaterials in constructed wetlands: prospection and future research perspectives

Metallic engineered nanomaterials (ENMs) undergo various transformations in the environment which affect their fate, toxicity and bioavailability. Although constructed wetlands (CWs) are applied as treatment systems for waste streams potentially containing metallic ENMs, little is known about the fate and effects of ENMs in CWs. Hence, literature data from related fields such as activated sludge wastewater treatment and natural wetlands is used to predict the fate and effects of ENMs in CWs and to analyze the risk of nanomaterials being released from CWs into surface waters. The ENMs are likely to reach the CW (partly) transformed and the transformations will continue in the CW. The main transformation processes depend on the type of ENM and the ambient environmental conditions in the CW. In general, ENMs are expected to undergo sorption onto (suspended) organic matter and plant roots. Although the risk of ENMs being released at high concentrations from CWs is estimated low, caution is warranted because of the estimated rise in the production of these materials. As discharge of (transformed) ENMs from CWs during normal operation is predicted to be low, future research should rather focus on the effects of system malfunctions (e.g. short-circuiting). Efficient retention in the CW and increasing production volumes in the future entail increasing concentrations within the CW substrate and further research needs to address possible adverse effects caused.     

Industrial wastewater treatment in internal circulation bioreactor followed by wetlands containing emergent plants and algae

Wastewater treatment based on ecological principles is a low cost and highly desirable solution for the developing countries like Pakistan. The present study evaluated the effectiveness of biological treatment systems including Internal Circulation (IC) anaerobic bioreactor and constructed wetlands (CWs) containing macrophytes and mixed algal cultures for industrial wastewater treatment. The IC bioreactor reduced COD (52%), turbidity (89%), EC (24%) of the industrial wastewater. However, the effluents of IC bioreactor did not comply with National Environmental Quality Standards (NEQS) of Pakistan. Post-treatment of IC bioreactor effluents was accomplished in CW containing macrophytes (Arundo donax and Eichhornia crassipes) and mixed algal culture. The CWs planted with macrophytes lowered the concentrations of COD (89%) and turbidity (99%). CWs with algal biomass were not effective in further polishing the effluent. Inhibition of algal biomass growth was observed due to physicochemical characteristics of wastewater. The integrated treatment system consisting of IC bioreactor and macrophytes was found more suitable option for industrial wastewater treatment.     

Impact of COD/N ratio on nitrous oxide emission from microcosm wetlands and their performance in removing nitrogen from wastewater

Constructed wetlands (CWs) are considered to be important sources of nitrous oxide (N₂O). In order to investigate the effect of influent COD/N ratio on N₂O emission and control excess emission from nitrogen removal, free water surface microcosm wetlands were used and fed with different influent. In addition, the transformation of nitrogen was examined for better understanding of the mechanism of N₂O production under different operating COD/N ratios. It was found that N₂O emission and the performance of microcosm wetlands were significantly affected by COD/N ratio of wastewater influent. Strong relationships exist between N₂O production rate and nitrite (r = 0.421, p < 0.01). During denitrification process, DO concentration crucially influences N₂O production rate. An optimal influent COD/N ratio was obtained by adjusting external carbon sources for most effective N₂O emission control and best performance of the CWs in nitrogen removal from wastewater. It is concluded that under the operating condition of COD/N ratio = 5, total N₂O emission is minimum and the microcosm wetland is most effective in wastewater nitrogen removal.     

Long-term performance of constructed wetlands with horizontal sub-surface flow: Ten case studies from the Czech Republic

Constructed wetlands with horizontal sub-surface flow (HF CWs) have been in use in the Czech Republic since 1989. Evaluation of the long-term performance of horizontal sub-surface flow constructed wetlands in the Czech Republic indicates that removal of organics and suspended solids is very effective; efficiencies are steady throughout the year and are not affected by season and also by the length of operation. The results from systems treating wastewaters from combined sewer systems clearly indicate that HF CWs can very effectively cope with low inflow concentrations of organics and can provide effluent BOD₅ concentrations less than 5 mg l⁻¹. Phosphorus removal is seasonally steady but low as Czech constructed wetlands do not use special filtration media with high sorption capacity. This is not a problem, because in the Czech Republic, there is currently no discharge limit for phosphorus for wastewater treatment plants up to 2000 person equivalents (PE). Removal of ammonia-N is limited by lack of dissolved oxygen in filtration beds caused by permanent saturation. The removal of ammonia-N is steady over the life of operation but is affected by season but the decrease in ammonia removal efficiency during winter is not large.     

Statistical modelling of organic matter and emerging pollutants removal in constructed wetlands

Multiple regression models, clustering tree diagrams, regression trees (CHAID) and redundancy analysis (RDA) were applied to the study of the removal of organic matter and pharmaceuticals and personal care products (PPCPs) from urban wastewater by means of constructed wetlands (CWs). These four statistical analyses pointed out the importance of physico-chemical parameters, plant presence and chemical structure in the elimination of most pollutants. Temperature, pH values, dissolved oxygen concentration, redox potential and conductivity were related to the removal of the studied substances. Plant presence (Typha angustifolia and Phragmites australis) enhanced the removal of organic matter and some PPCPs. Multiple regression equations and CHAID trees provided numerical estimations of pollutant removal efficiencies in CWs. These models were validated and they could be a useful and interesting tool for the quick estimation of removal efficiencies in already working CWs and for the design of new systems which must fulfil certain quality requirements.     

Influence of design and operational parameters on the pathogens reduction in constructed wetland under the climate change scenario

Reviews in Environmental Science and Bio/Technology - Under the climate change scenario, constructed wetlands (CWs) as an engineered system for treating domestic wastewater will face different...     

Treatment of industrial wastewater with two-stage constructed wetlands planted with Typha latifolia and Phragmites australis

Industrial wastewater treatment comprises several processes to fulfill the discharge permits or to enable the reuse of wastewater. For tannery wastewater, constructed wetlands (CWs) may be an interesting treatment option. Two-stage series of horizontal subsurface flow CWs with Phragmites australis (UP series) and Typha latifolia (UT series) provided high removal of organics from tannery wastewater, up to 88% of biochemical oxygen demand (BOD₅) (from an inlet of 420 to 1000 mg L⁻¹) and 92% of chemical oxygen demand (COD) (from an inlet of 808 to 2449 mg L⁻¹), and of other contaminants, such as nitrogen, operating at hydraulic retention times of 2, 5 and 7 days. No significant (P < 0.05) differences in performance were found between both the series. Overall mass removals of up to 1294 kg COD ha⁻¹ d⁻¹ and 529 kg BOD₅ ha⁻¹ d⁻¹ were achieved for a loading ranging from 242 to 1925 kg COD ha⁻¹ d⁻¹ and from 126 to 900 kg BOD₅ ha⁻¹ d⁻¹. Plants were resilient to the conditions imposed, however P. australis exceeded T. latifolia in terms of propagation.     

Comparison of the treatment performances of blast furnace slag-based and gravel-based vertical flow wetlands operated identically for domestic wastewater treatment in Turkey

In 2001, to foster the practical development of constructed wetlands (CWs) used for domestic wastewater treatment in Turkey, vertical subsurface flow constructed wetlands (30 m² of each) were implemented on the campus of the METU, Ankara, Turkey. The main objective of the research was to quantify the effect of different filter media on the treatment performance of vertical flow wetlands in the prevailing climate of Ankara. Thus, a gravel-filled wetland and a blast furnace granulated iron slag-filled wetland were operated identically with primarily treated domestic wastewater (3 m³ d⁻¹) at a hydraulic loading rate of 0.100 m d⁻¹, intermittently. Both of the wetland cells were planted with Phragmites australis. According to the first year results, average removal efficiencies for the slag and gravel wetland cells were as follows: total suspended solids (TSS) (63% and 59%), chemical oxygen demand (COD) (47% and 44%), NH₄⁺–N (88% and 53%), total nitrogen (TN) (44% and 39%), PO₄³⁻-P (44% and 1%) and total phosphorus (TP) (45% and 4%). The treatment performances of the slag-filled wetland were better than that of the gravel-filled wetland in terms of removal of phosphorus and production of nitrate. Since this study was a pioneer for implementation of subsurface constructed wetlands in Turkey using local sources, it has proved that this eco-technology could also be used effectively for water quality enhancement in Turkey.     

人工湿地研究进展及应用

基于生态学原理的人工湿地污水处理技术已成为人们竞相研究开发的热点。介绍了人工湿地的分类,论述了污染物包括有机物、氮磷污染物、重金属的去除机理的研究进展,分析了湿地植物种类与根系量对污染物去除效果的影响,讨论了湿地结构以及工艺设计的研究情况。最后以人工湿地处理生活用水和工业用水为例综述了人工湿地目前在国内应用的状况。通过以上分析评述发现,人工湿地运行费用低,操作简单,是一种具有前景的污水处理技术,但在污染物去除机理和实践应用方面还需做更深入的研究。     

Rehabilitation by constructed wetlands of available wastewater treatment plant in Sakhnin

In rural areas, insufficient wastewater treatment often causes serious environmental problems, especially for human health. Due to this problem, new wastewater treatment plants (WWTP) should be constructed or upgraded. When considering economic and maintenance factors, constructed wetlands (CWs) are more desirable processes. The available WWTP located in the Northern Israeli town of Sakhnin was redesigned and upgraded. To rehabilitate the WWTP, six new CWs having different operating conditions were constructed as a pilot project. The most appropriate place of construction of the CWs was thought to be at the end of the WWTP. From the beginning of the system, inlet and outlet pollution parameters such as chemical oxygen demand (COD), ammonia (NH₄-N⁺), total suspended solids (TSS), and phosphorus (PO₄-P³⁻) were monitored in the CWs from August 2005 to February 2006. As a result the most appropriate CWs were found having Phragmites as plant and volcanic tufa as media material. The maximum removal efficiencies were 71.8% on COD, 92.9% on TSS, 63.8% on ammonia for CW5 tank. Adversely, phosphorus removal was not so high in CW5. Phosphorus removal was negligible in the study.     

刈割对人工湿地风车草生长及污水净化效果的影响

刈割对人工湿地植物的生长和净化作用的影响,国内外学者的意见存在分歧。实验于2010年7月至2011年1月在华南师范大学生物园进行。利用水池(2m×2m×0.6m)构建风车草人工湿地生活污水处理系统,研究了刈割对人工湿地风车草生长和污水净化效果的影响。结果表明,刈割组风车草在整个实验过程中均保持着良好的生长态势,而对照组在11月以后生长减缓。刈割组风车草2010年7月至2011年1月的累积地上生物量、累积地上氮磷含量以及新增分蘖数均大于对照组,表现为超补偿生长。刈割组风车草的叶绿素含量、净光合速率、蒸腾速率和气孔传导率均显著高于对照组。刈割组和对照组的TN、TP、NH4-N和NO3-N的平均去除率分别为77%、84%、64%、72%和65%、67%、55%、63%,前者显著大于后者。刈割组和对照组的CODcr和BOD5平均去除率分别为58%、79%和54%、76%,两者差异不显著。总之,刈割对人工湿地风车草的生长和污水净化效果有明显的促进作用,这可为风车草人工湿地的科学管理提供参考。     

Toxicity of high salinity tannery wastewater and effects on constructed wetland plants

The toxicity of high salinity tannery wastewater produced after an activated sludge secondary treatment on the germination and seedling growth of Trifolium pratense, a species used as indicator in toxicity tests, was evaluated. Growth was inhibited by wastewater concentrations >25% and undiluted effluent caused a complete germination inhibition. Constructed wetlands (CWs) with Arundo donax or Sarcocornia fruticosa were envisaged to further polish this wastewater. Selection of plant species to use in CWs for industrial wastewater treatment is an important issue, since for a successful establishment they have to tolerate the often harsh wastewater composition. For that, the effects of this wastewater on the growth of Arundo and Sarcocornia were assessed in pot assays. Plants were subject to different wastewater contents (0/50/100%), and both were resilient to the imposed conditions. Arundo had higher growth rates and biomass than Sarcocornia and may therefore be the preferred species for use in CWs treating tannery wastewater. CWs planted with the above mentioned plants significantly decreased the toxicity of the wastewater, as effluent from the CWs outlet stimulated the growth of Trifolium at concentrations <50%, and seed germination and growth even occurred in undiluted effluent.     

Plants used in constructed wetlands with horizontal subsurface flow: a review

The presence of macrophytes is one of the most conspicuous features of wetlands and their presence distinguishes constructed wetlands from unplanted soil filters or lagoons. The macrophytes growing in constructed wetlands have several properties in relation to the treatment process that make them an essential component of the design. However, only several roles of macrophytes apply to constructed wetlands with horizontal subsurface flow (HF CWs). The plants used in HF CWs designed for wastewater treatment should therefore: (1) be tolerant of high organic and nutrient loadings, (2) have rich belowground organs (i.e. roots and rhizomes) in order to provide substrate for attached bacteria and oxygenation (even very limited) of areas adjacent to roots and rhizomes and (3) have high aboveground biomass for winter insulation in cold and temperate regions and for nutrient removal via harvesting. The comparison of treatment efficiency of vegetated HF CWs and unplanted filters is not unanimous but most studies have shown that systems with plants achieve higher treatment efficiency. The vegetation has mostly a positive effect, i.e. supports higher treatment efficiency, for organics and nutrients like nitrogen and phosphorus. By far the most frequently used plant around the globe is Phragmites australis (Common reed). Species of the genera Typha (latifolia, angustifolia, domingensis, orientalis and glauca) and Scirpus (e.g. lacustris, validus, californicus and acutus) spp. are other commonly used species. In many countries, and especially in the tropics and subtropics, local plants including ornamental species are used for HF CWs.     

Removal of phosphates by pilot vertical-flow constructed wetlands using a mixture of sand and dolomite as substrate

This study evaluates the performance of a mixture of river sand and dolomite (10:1, w/w) used as substrate in vertical-flow constructed wetlands in removal of phosphates. Two duplicate pilot-scale artificial wetlands (total 4 units) were set up outdoors, planted with Phragmites australis and fed with a synthetic sewage solution, corresponding to medium strength municipal wastewater. The wetlands were fed with two batch (intermittent) operational modes and their effluent was monitored for the presence of soluble phosphates over a period of 3 months. Laboratory (batch) incubation experiments were also carried out separately to ascertain the phosphate adsorption capacity of the two materials (i.e. sand and dolomite). The wetlands were capable to remove more than 45% of initially applied phosphates. Phosphorus accumulation in the wetlands body at the end of the operation period was in the range of 6.5–18%, as compared with the unused media. The Ca Mehlich-III extractable content was also increased, indicating that the removal of phosphates would be mainly attributed to the sorption of orthophosphate ions onto calcium carbonates and/or to the precipitation of orthophosphate ions with calcium ions as the respective insoluble calcium phosphates.     

Bacterial transformation and biodegradation processes simulation in horizontal subsurface flow constructed wetlands using CWM1-RETRASO

The performance and reliability of the CWM1-RETRASO model for simulating processes in horizontal subsurface flow constructed wetlands (HSSF CWs) and the relative contribution of different microbial reactions to organic matter (COD) removal in a HSSF CW treating urban wastewater were evaluated. Various different approaches with diverse influent configurations were simulated. According to the simulations, anaerobic processes were more widespread in the simulated wetland and contributed to a higher COD removal rate [72-79%] than anoxic [0-1%] and aerobic reactions [20-27%] did. In all the cases tested, the reaction that most contributed to COD removal was methanogenesis [58-73%]. All results provided by the model were in consonance with literature and experimental field observations, suggesting a good performance and reliability of CWM1-RETRASO. According to the good simulation predictions, CWM1-RETRASO is the first mechanistic model able to successfully simulate the processes described by the CWM1 model in HSSF CWs.