Environmental risk assessment of heavy metals pollution in aquatic ecosystem—A case study: Sediment of Kor River,Iran

A comprehensive investigation of fractionation and environmental risk of nine heavy metals is carried out for 12 sediment samples collected from Kor River, Iran. For this purpose, the 5-stage sequential extraction method, along with individual contamination factor, global contamination factor, and Environmental Risk Index (ERI), is used. Total concentrations of Cr, Hg, Ni, and Zn were found to be beyond the threshold effect level. The results of fractionation patterns indicate that As, Cr, Ni, Pb, and Zn are mostly associated with Fe-Mn oxide fraction, organic fraction, and residual fraction, while Cd and Mo are predominantly associated with carbonate fraction. Cu and Hg are mostly associated with organic and exchangeable fractions. The results of ERI revealed High to Dangerous risks in 40% of Kor River stations. The applied approach in this study is beneficial to other environmental studies that require analysis of complex data.     

Chemical partitioning of iron,cadmium, nickel and chromium in contaminated soils of south-eastern Nigeria

Abstract

Selected heavy metals Fe, Cd, Ni and Cr were studied in contaminated soil samples collected from south-eastern Nigeria. Geochemical differentiation into different chemical fractions, using Ma and Rao six-step sequential chemical extraction procedure, was carried out to assess the potential mobility and bioavailability of the heavy metals in the soil profiles. The residual fraction was the most important phase for the four heavy metals with the following average percentage values 74.43 for Fe, 37.69 for Cd, 70.11 for Ni and 62.47 for Cr. The carbonate fraction contained an appreciable proportion of Fe, Cd and Ni with the average percentage values of 16.29, 14.86 and 10.47 respectively, while organic fraction was of next importance for Cr with an average percentage value of 27.14. The Fe-Mn oxide fraction also contained 15.86% of Cd. Relatively low amounts of the metals were associated with water soluble and exchangeable fractions. The mobility factors for the metals in all the sites ranged from 8.55 to 40.04 for Fe, 8.66 to 56.58 for Cd, 12.74 to 30.19 for Ni and 0.82 to 7.22 for Cr. The generally low values of mobility factors coupled with significantly high levels of association of the metals with the residual fraction, indicate that the metals do not pose any environmental risk nor hazard.     

Trace Metal Fractionation by the Sequential Extraction Method in Sediments from the Lis River (Portugal)

The extractable contents of Zn, Pb, Cu, Cr, Mn, Ni, Fe and Al were evaluated in sediments from the Lis River (Portugal) using the three-step sequential extraction procedure described by Community Bureau of Reference (BCR, now the Standards, Measurement and Testing Programme) of the European Union. The distribution of trace metals among the exchangeable, water and acid soluble, reducible, oxidizable and residual fractions was determined. The highest metal concentrations were observed in samples collected at the most polluted river sites (animal husbandry, domestic, industrial and agricultural wastes). Pb, Cu, Cr, Ni, Fe and Al were found mainly associated with the residual and organic fractions. High concentrations of Zn and Mn were found in the exchangeable/acid soluble fraction.     

The Concentration and Partitioning of Heavy Metals in Surface Sediments of the Maharlu Lake,SW Iran

In this study, an assessment is made of the environmental impacts of heavy metal concentration and fractionation in bed sediments of the saline Maharlu Lake, SW Iran. Total elemental analysis indicated that sediments were highly enriched in Pb and Cd. Sequential extraction analysis revealed that salt of the lake is probably highly contaminated with Cd, Pb, and Co. Due to the oxidizing conditions of the lake, the organic matter fraction of the elements was not significant. In all sediments, Cd, Pb, Co, Mn, and Zn were strongly associated with exchangeable plus carbonate fractions, with mean percentage of 76.4%, 65.3%, 56%, 40.9%, and 34.3%, respectively. On average, the percentage of Ni associated with the sum of the exchangeable and carbonate fractions was 19.8%. Cr, Fe, and Cu fractionation indicated that these metals are environmentally inert and immobile. Statistical relationships among metal fractions and sediment properties showed that Cd, Pb, Zn, Ni, Co, and Mn were mainly from recent anthropogenic sources, while such sources were less important for Cr, Cu, and Fe. The latter metals represented natural geochemical levels.     

Total concentrations and fractionation of heavy metals in road-deposited sediments collected from different land use zones in a large city (Nanjing), China

Abstract

In order to investigate heavy metal contamination in an urban environment during urbanization and economic development, 35 road-deposited sediment samples were collected from seven different land-use zones (commercial, residential, traffic, scenic park, educational, industrial and peri-urban) in Nanjing, a large city in P.R. China. The ranges of total metal concentrations found were: 28.7–272 mg kg^?1 for Cu; 24.8–268 mg kg^?1 for Ni; 37.3–204 mg kg^?1 for Pb; 140–798 mg kg^?1 for Zn; 0.44–2.19mg kg^?1 for Cd; and 60.6–250 mg kg^?1 for Cr. Metal fractionation was carried out using a modified three-step European Bureau of References (BCR) sequential extraction procedure. Cadmium and Zn were found predominantly associated with the acid extractable fractions; Ni and Cr were dominant in the residual fraction; Pb was predominantly associated with the residual and reducible fractions; Cu was dominant in the oxidizable and residual metal fractions. Based on the sum of the acid-extractable, reducible, and oxidizable fractions, Cd, Zn and Pb are potentially the most toxic metals in the road-deposited sediment in Nanjing. No significant differences, except for Zn, were found in the metal fractionation pattern for Cu, Ni, Pb, Cd, and Cr in different land use zones.     

Solid-Phase Chemical Fractionation of Selected Trace Metals in Some Northern Kentucky Soils

The fractionation and distribution with depth of Cd, Cr, Cu, Ni, Pb, and Zn in 26 soils of Northern Kentucky were determined through a sequential extraction procedure in response to environmental concerns about increasing anthropogenic inputs in a fast-paced, urbanizing area. The selected sites have not received any biosolid- or industrial-waste applications. Average total concentrations per metal in soil profiles derived from alluvial, glacial till, and residual materials ranged from 0.43 to 56.00 mg kg^?1 in the sequence Zn > Ni > Pb > Cr > Cu > Cd, suggesting relatively small anthropogenic inputs. The distribution of Cu, Cr, Ni, and Zn increased with soil depth, whereas Cd and Pb remained stable, indicating a strong geological or pedogenic influence. Residual forms were most important for the retention of Cu, Zn, and Ni. Cadmium and Pb exhibited a strong affinity for the Fe-Mn oxide fraction, while Cr showed the strongest association with the organic fraction. In terms of metal mobility and toxicity potential inferred from metal concentrations in labile fractions, Cd posed the greatest risk, followed by Cr ～ Pb > Ni > Zn > Cu. Soil pH, OM, and clay content were the most important parameters explaining the partitioning of metals in labile and residual fractions, emphasizing the importance of metal fractionation in soil management decisions. Alluvial soils generally contained the highest total and labile metal concentrations, suggesting potential metal enrichment through anthropogenic additions and depositional processes. These environments exhibit the highest risk for metal mobilization due to drastic changes in redox conditions, which can destabilize existing metal retention pools.     

Geochemical distribution and fractionation of heavy metals in sediments of a freshwater reservoir of India

Abstract

Sediments of a polluted reservoir were evaluated for total contents of Cd, Cr, Cu, Ni, Pb and Zn along with their different geochemical forms (exchangeable, carbonate, Fe–Mn, organic matter and residual). Mineralogy of the sediments and physico-chemical parameters i.e. pH, OC and percentage of sand, silt and clay were also evaluated to see the dependency of heavy metals concentration on these parameters. The total concentration of heavy metals in the sediments varied according to sites and seasons. Except for station H1 which had moderately higher concentration of Cu (45.5 mg kg^-1), concentrations of all other metals at all the sites under study were below the standard shale value. Maximum proportions of all metals were associated with the carbonate and residual fractions. The Risk Assessment Code showed a low risk for Cr, Ni and Zn, and a medium risk for Cu at station H3 and H4. On the basis of freshwater sediment quality guidelines, there is a strong possibility of Cr and Cu toxicity for aquatic biota of the reservoir. The data were further processed using Pearson’s correlation and factor analysis to obtain more accurate information about the behaviour of these metals. A positive relationship among the metals confirmed the anthropogenic sources of pollution in the reservoir. Significant positive relationships of heavy metals with the texture of the sediment were also obtained.     

Phytoextraction capacity of the plants growing on tannery sludge dumping sites

The study was undertaken to assess the phytoremediation potential of four plants (Sida acuta, Ricinus communis, Calotropis procera, Cassia fistula) growing at a tannery sludge disposal site. Results showed that maximum amount of K, Fe and Ni was associated with residual fraction, whereas, Zn, Mn, Cr, Pb, Cd and Co was found in Fe-Mn oxide fraction. Cu and Na were mostly associated with organic matter and carbonate fraction, respectively. The results demonstrated that the levels of accumulation of metals was found high in all the studied plants and followed the order; C. procera>S. acuta>R. communis=C. fistula. The principal components analysis (PCA) revealed that translocation behavior of Cu, Zn and Mn, Cr were found similar in the plants. Correlation analysis between metal accumulation in the plants with DTPA extractable metals emphasized that S. acuta and C. fistula provide better value of correlation for most of the tested metals. The values of transfer factor were also found high for most of the tested metals in the plants of S. acuta. Overall, the plants of S. acuta and C. fistula were found suitable for the decontamination of most of the metals from tannery waste contaminated sites.     

Chemical Speciation and Mobility of Some Trace Elements in Vermicomposted Fly Ash

Fly ash, a by-product of power plants, is currently being used extensively in India for soil amendment. However, the toxic elements sorbed in the fly ash might pose a serious threat to the environment, causing soil and water contamination. Vermicomposting of fly ash is expected to reduce the contamination of toxic trace metal and could improve the mobility of essential trace element. The current study is focused on characterizing different species of trace metals and their bio-availability in the vermicomposted fly ash (VCFA)-treated lateritic soil. As a fertilizer, different doses (10%, 20%, 30%, 40%, and 50%) of VCFA were applied to the soil and sequential extraction was carried out to analyze trace elements. In the different fractions, Cr < Mn < Pb < Fe were found to be sorbed more to Fe-Mn oxide-bound fractions, whereas Cd, Cu, and Zn were bound more to organic-matter-bound fractions; Cr and Ni were mostly bound to residual fraction. The Fe-Mn oxides and organic-matter-bound fractions may be bio-available with the appropriate environmental condition, whereas chromium and nickel mostly associated with residual fraction are very difficult to release into the environment. The mobility factor index showed the midlevel substitution (i.e., 10% to 30% of VCFA to lateritic soil) to be beneficial as these doses increased the bio-availability of some essential trace elements and restricted the availability toxic trace metals in the soil. At higher doses, the toxic trace metals were found to be released in the bio-available form, which could be hazardous to the environment.     

Spatial distribution of metals in the constructed wetlands

Investigation of the spatial distribution of metals was conducted for two constructed wetlands used as tertiary treatment in Chia Nan University of Pharmacy and Science (CNU) and Metal Processing Industries (MPI) located in Tainan, Taiwan. These two distinguished sites were selected to compare the distribution of metals for constructed wetlands treating different types of wastewater. Along the distance, samples of water, sediment, and macrophytes were analyzed for metals including Al, Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Zn. Additionally, measurements of water quality including temperature, pH, EC, ORP, DO, TSS, BOD, COD, and turbidity were performed. Results show that, at CNU, wastewater contained higher organic consititute (BOD 29.3 +/- 11.7 mg/, COD 46.7 +/- 33.6 mg/L) with low metals content. Wastewater at MPI contained low level of organic consititute (BOD 7.1 +/- 3.3 mg/L, and COD 66.0 +/- 56.5 mg/L) and higher metals content. Metals distribution of both sites showed similar results where metals in the sediments in the inlet zone have greater concentrations than other areas. The constructed wetlands can remove Cd, Cu, Ni, Pb, and Zn. However, there was no removal of Al, Cr, Fe, and Mn. A distance along the constructed wetlands had no effect on metal concentrations in macrophyte and water.     

Distribution,bioavailability, and potential risk assessment of the metals in tributary sediments of Three Gorges Reservoir: The impact of water impoundment

To investigate the impact of water impoundment on the metal contamination in sediments cores from the three tributaries of Three Gorges Reservoir (TGR), the concentrations, distribution, bioavailability, and potential risk of eight trace metals between summer and winter were analyzed using sequential analysis. The mean contents of all studied metals were higher than the geochemical background value, and were higher in summer than in winter. The results of the partitioning study indicated that Cr and Ni prevailed in the residual fraction, while a small proportion was found in the easily soluble fractions. Cu and Zn were distributed mainly in the residual and reducible fraction, while Cd and Pb were predominantly associated with non-residual fractions. These observations suggested that the most easily mobilized metals in the study area were Cd and Pb. The mean enrichment factors (EF) of Cu, Zn, Cd and Hg were higher than 1.5, revealing the potential anthropogenic inputs, whilst the EF of other metals remained within the range of natural variability. The positive correlation between non-residual Cu, Zn and Cd and their EF values further indicated that anthropogenic inputs were the potentially major contributor for the enrichment of Cu, Zn and Cd in TGR sediments. The results evaluated by both potential ecological risk index and modified risk assessment code (mRAC) of all sampling sites demonstrated the relatively high potential risk of sediment contamination effect in TGR.     

Quick sequential procedure for speciation analysis of heavy metals in soils by supersonic extraction

Abstract

In order to improve the extraction efficiency and reduce the operation time, supersonic energy by means of supersonic bath was used to the modified Tessier sequential extraction for speciation analysis of heavy metals in soils. Extractable contents of Cu, Fe, Mn, Ni, Pb and Zn were measured by flame atomic absorption spectroscopy. The merit of the supersonic extraction (SE) applied to the modified Tessier, method is not only that the operation time for the first 4 fractions was reduced from ca 18 h to 8 h, comparing with conventional extraction (CE), but also the extraction efficiency was higher. There were no significant differences between the data obtained by the proposed method using supersonic extraction and the reference values of the standard reference materials of EES-2 and EES-3. The results for both of SE and CE in the soil samples were consistent. The extractable Cu, Ni and Zn in the sample No. 1 were mainly associated with the third fraction (Fe-Mn oxides fraction), and fourth fraction (organic matter fraction) in the sample No. 2. The extractable Fe and Mn were all mainly associated with the third fraction, and Pb the fourth fraction in both of the samples. The effects of varying concentrations of hydroxylamine hydrochloride on the extraction of metals were also studied.     

Comparison of heavy metal accumulation in a natural wetland and constructed wetlands receiving acid mine drainage

Metal accumulations in sediments and plants of constructed and natural wetlands were compared in two wetlands constructed by the Tennessee Valley Authority (TVA) for the treatment of acid mine drainage and a natural wetland. Load rates and removal efficiencies of most metals were generally greater in the constructed wetlands than in the natural wetland. There were similar sediment and plant metal concentrations between one constructed wetland and the natural wetland and greater metal concentrations in the sediments and plants in the other constructed wetland compared to the natural wetland. Data indicate that Mn, Zn, Cu, Ni, B, and Cr are being accumulated in the plants at all three wetlands, although accumulation of metals by these plants accounts for only a small percentage of the removal of the annual metal load supplied to each wetland.     

Transfection of siRNA into <Emphasis Type="Italic">Brachionus plicatilis</Emphasis> (Rotifera)

Lake Taihu is one of the most contaminated lakes in China. Surface sediment data show that the northern area of the Lake has the worst heavy metals pollution, and high heavy metal concentrations were attributed to discharge of untreated and partially treated industrial waste water from cities to the north of the lake. To study geochemical features and pollution history of heavy metals, total content and chemical fractionations of Cu, Fe, Mn, Ni, Pb, and Zn were analyzed for core sediments from western Lake Taihu using the speciation extraction procedure, proposed by the Commission of the European Communities Bureau of Reference (BCR), together with grain size and organic carbon measurements. Results show that sediments are composed of organic-poor clayey-fine silts for Cores MS and DLS, and have similar geochemical features shown by heavy metals. Cu, Fe, Ni, and Zn mainly are associated with the residue fraction, Mn is concentrated in the exchangeable-carbonate and residue fractions, and Pb is concentrated in the Fe–Mn oxide fraction and organic-sulfide fraction. The fractions of Ni, Pb, and Zn bound to Fe–Mn oxide show significant correlations with Mn from the Fe–Mn oxide fraction, and the organic-sulfide fractions of Cu, Mn, Ni, Pb, and Zn are correlated with TOC. The increase of Cu, Mn, Ni, Pb and Zn content and percentage of extractable fractions in the upper layers of the sediments are correlated with anthropogenic input of heavy metals due to rapid industrial development. This coincides with rapid economic development in the Taihu basin since late 1970s. Heavy metals in the surface sediments have certain potential biological toxicity as shown by the higher SEM/AVS ratio.     

Concentrations and Distribution of Trace Metals in Water and Streambed Sediments of Orogodo River,Southern Nigeria

The distribution of Cd, Pb, Ni, Cr, Cu, Mn, Fe, and Zn in sediment and surface water, and some physico-chemical characteristics of Orogodo river sediments, were evaluated. The sediment pH ranged from 5.1–7.3; conductivity values ranged from 34.5 to 389.0 μScm^?1. Total nitrogen values ranged from 0.06–0.10%, NH₃-N values ranged from 0.25–0.44 mgkg^?1, percent total organic carbon ranged from 0.21–1.68%, and total phosphorus values ranged from 0.004–0.02% for dry and wet seasons. The sand fraction consists of 87–95%, silt fractions ranged from 0–2%, and clay fraction between 4–13%. The mean concentrations of metals (dry weight basis) in the streambed sediments ranged from 1.92–17.37 mgkg^?1 for Cu, 0.98–4.78 mgkg^?1 for Ni, 0.01–32.98 mgkg^?1 for Mn, 353.22–2045.64 mgkg^?1 for Fe, 69.96–100.16 mgkg^?1 for Zn, 0.21–1.32 mgkg^?1 for Cr, and Cd was less than 0.001 mgkg^?1 for wet and dry seasons. The mean concentrations of metals in the surface water ranged between 0.01–0.05–0.05 mg/L for Cu, nd-0.11 mg/L for Ni, 0.001–0.31 mg/L for Pb, 0.001–1.82 mg/L Mn, 0.01–3.52 mg/L for Fe, 0.16–0.61 mg/L for Zn, nd-0.007 mg/L for Cr, and <0.001 mg/L for Cd. Based on principal component analysis, two main sources of metals in the Orogodo River can be identified: (i) Cr, Cu, Pb, and Fe are mainly derived from industrial sources; (ii) Mn, Zn, and Ni associated with traffic activities. No element examined had a contamination/pollution index value greater than unity (pollution ranges). This implies that the multiple pollution indices obtained from the analysis showed that Orogodo River sediments were not polluted with heavy metals.     

Geochemical distribution of heavy metals in sediments from sewage fed fish ponds from Kolkata Wetlands,India

Abstract

Kolkata wetlands are the largest sewage fed wetlands in the world. They have been used for aquaculture since 1960. Geochemical distribution of heavy metals (Cr, Cu, Mn, Fe, Zn, Pb, Ni and Al) has been studied in surface sediments using single and sequential extractions techniques. The metal concentrations in sediments were in the following order: Fe>Al> Mn>Zn>Cu> Pb>Cr> Ni, and the average concentrations were 29 μg g^?1, 54 μg g^?1, 328 μg g^?1, 32747 μg g^?1, 169 μg g^?1, 38 μg g^?1, 25 μg g^?1 and 23371 μg g^?1 dry weights for Cr, Cu, Mn, Fe, Zn, Pb, Ni and Al, respectively. Water-soluble percentages of the trace elements are quite low (<0.01–3.75%) but in the presence of chelating agents in the sediments increase the bioavailability of trace elements (2–58%). About 40% of trace elements are in the stable form as a residual fraction of the sediment and more than 50% (nonresidual fraction) metal contamination of the Kolkata wetland sediments were from anthropogenic inputs. The contamination risks of Cr, Mn, Zn, Pb, and Ni are high as their potential availabilities are 70.96%, 58.01%, 63.13%, 55.62%, and 52.15% respectively. The mean concentration of most of the heavy metals in sediments does not exceed the recommended reference values. Zinc and lead concentrations were greater than background level and Interim Sediment Quality Guidelines but lower than Probable Effect Level. Therefore a regular program for monitoring the distribution of heavy metals in water, sediments and biota should be imposed on sewage fed fish ponds of the Kolkata wetland ecosystem.     

Assessment of a heavy metals‐contaminated site using sequential extraction,TCLP, and risk assessment techniques

The mobility of selected heavy metals in contaminated soil at a previous industrial site in Brisbane, Australia, was assessed using a sequential extraction technique. Copper, Pb, Zn, Cr, Fe, and Mn were extracted from the soil solution/exchangeable, carbonate, Fe and Mn oxides, and organic matter fractions. The amounts of metals adsorbed by these fractions were used as an indicator of each metal's mobility in the soil. Copper and Pb were largely adsorbed by the organic and oxide fractions, while a significant amount of Zn was extracted from the carbonate fraction. The potential mobility and biological availability of the metals in these soils is Zn > Cr = Cu ≈ Pb. Soils were also analyzed using the toxicity characteristic leaching procedure (TCLP) to determine whether the contaminated soil could be disposed of by landfilling. The leachability of all metals from the soils was very low, with metal concentrations below the allowable limits. The TCLP also showed that Zn was the most mobile metal in these soils. An environmental and health risk assessment was undertaken, and it was concluded that the site did not represent a risk despite the “total”; concentrations of some metals being up to 40 times the investigation threshold value adopted in Australia.     

Cumulative Title Index

Abstract

Metal fractionation is a powerful tool for studying the mobility, bioavailability and toxicity of metals in sediments and soils. A seven-step sequential extraction technique was used to determine the potential mobility of selected heavy metals (Fe, Mn, Zn, Cu, Pb, Cd and Ni) in the sediments of Lake Naivasha. Results indicate that residual fraction was the most important phase for the elements Fe, Mn, Cu and Zn. However, Pb and Cd are highly enriched in the non-residual phases. Nickel on the other hand was distributed evenly between the non-residual and the residual fractions.

The total concentrations of the heavy metals suggested a decreasing order of iron ?> manganese ? zinc > nickel > copper ? lead > cadmium. However, the detailed sequential extraction data indicated an order of release or mobility of cadmium > lead ? nickel ? zinc > manganese > copper > iron. The high percentage of Cd and Pb in the mobile fractions suggests high bioavailability of these two elements in the study area and maybe a pointer to anthropogenic input of the two elements in the study area.     

Phytoremediation of Cd, Cr, Cu, Mn, Fe, Ni, Pb and Zn from aqueous solution using Phragmites cummunis, Typha angustifolia and Cyperus esculentus

A comparative bioaccumulation pattern and ultra structural changes were studied in Phragmites cummunis, Typha angustifolia and Cyperus esculentus in mixed metals solution of cadmium (Cd), chromium (Cr), copper (Cu), iron (Fe), manganese (Mn), nickel (Ni), lead (Pb) and zinc (Zn). P. cummunis was observed to be a shoot accumulator for Cr, Fe, Mn, Ni, Pb, and Zn. However, T. angustifolia was found to be a root accumulator for Cd, Cr, Cu, Fe, Ni and Pb. In addition, C. esculentus also accumulated most of the tested heavy metals in the roots, while Mn and Fe were translocated up to leaves. Further, the long term metal treatment showed maximum accumulation of all heavy metals in P. cummunis followed by T. angustifolia and C. esculentus. Among heavy metals, Fe was accumulated maximum, i.e., >1000 microg g(-1) by all three plants. Simultaneously, the adverse effects on biochemical parameters were noted earlier in C. esculentus than T. angustifolia and P. cummunis. Ultra structural observation showed the cellular changes in wetland plants after longer exposure. Results revealed that P. cummunis and T. angustifolia had more potential for tested metals than C. esculentus. This study established that these wetland plants could be used for heavy metals phytoremediation from metal containing industrial wastewater.     

Mussels as bioindicators of trace metal pollution in the Danube Delta of Romania

Specimens of mussels species Anodonta anatina, Unio pictorum, U. tumidus and surfical sediment samples were collected in the summers of 1994 and 1995 from twelve lakes in the Danube Delta, Romania. Whole mussel tissues were analyzed for metals (Ag, As, Cd, Co, Cu, Cr, Ni, Pb, Se and Zn), and sediment samples were subjected to weak acid extraction and to a sequential extraction procedure, and analyzed for Cr, Cu, Ni and Zn. Total mean Cu and Ag concentrations were statistically greater in Unio species than in Anodonta species, but other metal levels did not significantly differ between mussel species. There was a ten fold variation for Cd and Pb and five fold variation for Zn, Ag and Co concentrations in mussels among lakes. Mean concentrations of As, Cu, Se and Zn in mussel tissues varied two fold among lakes. Zn, Co and Cd concentrations in mussels were significantly negatively correlated with distance gradients from the origin of the Delta and with distance from main channels of the Danube. Other metal concentrations in mussels did not correlate with either distance gradient. Trace metal levels in mussel tissues were correlated with those in weak acid and in sequential extractions of sediment. Zn concentrations in the carbonate fraction was the best predictor of Zn concentrations in mussels. Cu and Ni levels in the organic matter and sulfide fraction were the best estimators of Cu and Ni concentrations in mussels. This revised version was published online in July 2006 with corrections to the Cover Date.