Cellulase–lignin interactions—The role of carbohydrate-binding module and pH in non-productive binding

Non-productive cellulase adsorption onto lignin is a major inhibitory mechanism preventing enzymatic hydrolysis of lignocellulosic feedstocks. Therefore, understanding of enzyme–lignin interactions is essential for the development of enzyme mixtures and processes for lignocellulose hydrolysis. We have studied cellulase–lignin interactions using model enzymes, Melanocarpus albomyces Cel45A endoglucanase (MaCel45A) and its fusions with native and mutated carbohydrate-binding modules (CBMs) from Trichoderma reesei Cel7A. Binding of MaCel45A to lignin was dependent on pH in the presence and absence of the CBM; at high pH, less enzyme bound to isolated lignins. Potentiometric titration of the lignin preparations showed that negatively charged groups were present in the lignin samples and that negative charge in the samples was increased with increasing pH. The results suggest that electrostatic interactions contributed to non-productive enzyme adsorption: Reduced enzyme binding at high pH was presumably due to repulsive electrostatic interactions between the enzymes and lignin. The CBM increased binding of MaCel45A to the isolated lignins only at high pH. Hydrophobic interactions are probably involved in CBM binding to lignin, because the same aromatic amino acids that are essential in CBM–cellulose interaction were also shown to contribute to lignin-binding.     

Structural Insights into the Affinity of Cel7A Carbohydrate-binding Module for Lignin

The high cost of hydrolytic enzymes impedes the commercial production of lignocellulosic biofuels. High enzyme loadings are required in part due to their non-productive adsorption to lignin, a major component of biomass. Despite numerous studies documenting cellulase adsorption to lignin, few attempts have been made to engineer enzymes to reduce lignin binding. In this work, we used alanine-scanning mutagenesis to elucidate the structural basis for the lignin affinity of Trichoderma reesei Cel7A carbohydrate binding module (CBM). T. reesei Cel7A CBM mutants were produced with a Talaromyces emersonii Cel7A catalytic domain and screened for their binding to cellulose and lignin. Mutation of aromatic and polar residues on the planar face of the CBM greatly decreased binding to both cellulose and lignin, supporting the hypothesis that the cellulose-binding face is also responsible for lignin affinity. Cellulose and lignin affinity of the 31 mutants were highly correlated, although several mutants displayed selective reductions in lignin or cellulose affinity. Four mutants with increased cellulose selectivity (Q2A, H4A, V18A, and P30A) did not exhibit improved hydrolysis of cellulose in the presence of lignin. Further reduction in lignin affinity while maintaining a high level of cellulose affinity is thus necessary to generate an enzyme with improved hydrolysis capability. This work provides insights into the structural underpinnings of lignin affinity, identifies residues amenable to mutation without compromising cellulose affinity, and informs engineering strategies for family one CBMs.     

Mechanisms of laccase-mediator treatments improving the enzymatic hydrolysis of pre-treated spruce

Background

The recalcitrance of softwood to enzymatic hydrolysis is one of the major bottlenecks hindering its profitable use as a raw material for platform sugars. In softwood, the guaiacyl-type lignin is especially problematic, since it is known to bind hydrolytic enzymes non-specifically, rendering them inactive towards cellulose. One approach to improve hydrolysis yields is the modification of lignin and of cellulose structures by laccase-mediator treatments (LMTs).

Results

LMTs were studied to improve the hydrolysis of steam pre-treated spruce (SPS). Three mediators with three distinct reaction mechanisms (ABTS, HBT, and TEMPO) and one natural mediator (AS, that is, acetosyringone) were tested. Of the studied LMTs, laccase-ABTS treatment improved the degree of hydrolysis by 54%, while acetosyringone and TEMPO increased the hydrolysis yield by 49% and 36%, respectively. On the other hand, laccase-HBT treatment improved the degree of hydrolysis only by 22%, which was in the same order of magnitude as the increase induced by laccase treatment without added mediators (19%). The improvements were due to lignin modification that led to reduced adsorption of endoglucanase Cel5A and cellobiohydrolase Cel7A on lignin. TEMPO was the only mediator that modified cellulose structure by oxidizing hydroxyls at the C6 position to carbonyls and partially further to carboxyls. Oxidation of the reducing end C1 carbonyls was also observed. In contrast to lignin modification, oxidation of cellulose impaired enzymatic hydrolysis.

Conclusions

LMTs, in general, improved the enzymatic hydrolysis of SPS. The mechanism of the improvement was shown to be based on reduced adsorption of the main cellulases on SPS lignin rather than cellulose oxidation. In fact, at higher mediator concentrations the advantage of lignin modification in enzymatic saccharification was overcome by the negative effect of cellulose oxidation. For future applications, it would be beneficial to be able to understand and modify the binding properties of lignin in order to decrease unspecific enzyme binding and thus to increase the mobility, action, and recyclability of the hydrolytic enzymes.

     

Protective effects of non-catalytic proteins on endoglucanase activity at air and lignin interfaces

The manner in which added non-catalytic proteins during enzymatic hydrolysis of lignocellulosic substrates enhances hydrolysis mechanisms is not completely understood. Prior research has indicated that a reduction in the non-specific adsorption of enzymes on lignin, and deactivation of enzymes exposed to air–liquid interface provide rationale. This work investigated root causes including effects of the air–liquid interface on non-catalytic proteins, and effects of lignin on endoglucanase. Three different experimental designs and three variables (air–liquid interfacial area, the types of lignin (acid or enzymatic lignin), and the presence of non-enzymatic protein (bovine serum albumin [BSA] or soy proteins ) were used. The results showed that acid isolated lignin adsorbed almost all endoglucanase activity initially present in supernatant, independent of air interface conditions (25 or 250 ml flasks) with the presence of BSA preventing this effect. Endoglucanase lost 30%–50% of its activity due to an air–liquid interface in the presence of lignin while addition of non-enzymatic protein helped to preserve this enzyme's activity. Langmuir and Freundlich models applied to experimental data indicated that the adsorption increases with increasing temperature for both endoglucanase and BSA. Adsorption of the enzyme and protein were endothermic with an increase in entropy. These results, combined, show that hydrophobicity plays a strong role in the adsorption of both endoglucanase and BSA on lignin.     

Cloning of a GH5 endoglucanase from genus Penicillium and its binding to different lignins

The cel5C gene, coding for an endoglucanase (Cel5C) of Penicillium brasilianum was cloned and heterologously expressed in Aspergillus oryzae. This is only the second GH5 EG from the genus Penicillium reported in the CAZy database. The promoter region of the gene has putative binding sites for both the carbon catabolite repressor CreA and the activator XlnR. The pH optimum of Cel5C was found to be 4.0 and the temperature optimum was 70 °C. At a typical temperature for lignocellulose hydrolysis Cel5C retained full residual activity after 20 h of incubation at pH 5.0 and 6.0. Adsorption to Avicel and steam pretreated spruce, was found to follow the Langmuir isotherm, and the maximum adsorption was similar for both substrates, 40 and 49 mg/g, respectively. The affinity for Avicel was 10 times higher than for steam pretreated spruce, 0.040 and 0.0035 L/mg, respectively. Non-productive binding of cellulolytic enzymes to lignin is an important obstacle to overcome for commercial biomass to ethanol production. Therefore, the adsorption on residual lignin produced from various biomass samples was investigated. Both substrate and pretreatment conditions resulted in different adsorptions of Cel5C to the residual lignin.     

Mechanism of lignin inhibition of enzymatic biomass deconstruction

Background

The conversion of plant biomass to ethanol via enzymatic cellulose hydrolysis offers a potentially sustainable route to biofuel production. However, the inhibition of enzymatic activity in pretreated biomass by lignin severely limits the efficiency of this process.

Results

By performing atomic-detail molecular dynamics simulation of a biomass model containing cellulose, lignin, and cellulases (TrCel7A), we elucidate detailed lignin inhibition mechanisms. We find that lignin binds preferentially both to the elements of cellulose to which the cellulases also preferentially bind (the hydrophobic faces) and also to the specific residues on the cellulose-binding module of the cellulase that are critical for cellulose binding of TrCel7A (Y466, Y492, and Y493).

Conclusions

Lignin thus binds exactly where for industrial purposes it is least desired, providing a simple explanation of why hydrolysis yields increase with lignin removal.

     

Enzymatic hydrolysis of chemithermomechanically pretreated sugarcane bagasse and samples with reduced initial lignin content

Chemithermomechanical (CTM) processing was used to pretreat sugarcane bagasse with the aim of increasing cell wall accessibility to hydrolytic enzymes. Yields of the pretreated samples were in the range of 75-94%. Disk refining and alkaline-CTM and alkaline/sulfite-CTM pretreatments yielded pretreated materials with 21.7, 17.8, and 15.3% of lignin, respectively. Hemicellulose content was also decreased to some extent. Fibers of the pretreated materials presented some external fibrillation, fiber curling, increased swelling, and high water retention capacity. Cellulose conversion of the alkaline-CTM- and alkaline/sulfite-CTM-pretreated samples reached 50 and 85%, respectively, after 96 h of enzymatic hydrolysis. Two samples with low initial lignin content were also evaluated after the mildest alkaline-CTM pretreatment. One sample was a partially delignified mill-processed bagasse. The other was a sugarcane hybrid selected in a breeding program. Samples with lower initial lignin content were hydrolyzed considerably faster in the first 24 h of enzymatic digestion. For example, enzymatic hydrolysis of the sample with the lowest initial lignin content (14.2%) reached 64% cellulose conversion after only 24 h of hydrolysis when compared with the 30% observed for the mill-processed bagasse containing an initial lignin content of 24.4%.     

Adsorption of Trichoderma reesei CBH I and EG II and their catalytic domains on steam pretreated softwood and isolated lignin

The presence of lignin has shown to play an important role in the enzymatic degradation of softwood. The adsorption of enzymes, and their constituent functional domains on the lignocellulosic material is of key importance to fundamental knowledge of enzymatic hydrolysis. In this study, we compared the adsorption of two purified cellulases from Trichoderma reesei, CBH I (Cel7A) and EG II (Cel5A) and their catalytic domains on steam pretreated softwood (SPS) and lignin using tritium labeled enzymes. Both CBH I and its catalytic domain exhibited a higher affinity to SPS than EG II or its catalytic domain. Removal of cellulose binding domain decreased markedly the binding efficiency. Significant amounts of CBH I and EG II also bound to isolated lignin. Surprisingly, the catalytic domains of the two enzymes of T. reesei differed essentially in the adsorption to isolated lignin. The catalytic domain of EG II was able to adsorb to alkaline isolated lignin with a high affinity, whereas the catalytic domain of CBH I did not adsorb to any of the lignins tested. The results indicate that the cellulose binding domain has a significant role in the unspecific binding of cellulases to lignin.     

Lignin monomer composition affects Arabidopsis cell-wall degradability after liquid hot water pretreatment

Background

Lignin is embedded in the plant cell wall matrix, and impedes the enzymatic saccharification of lignocellulosic feedstocks. To investigate whether enzymatic digestibility of cell wall materials can be improved by altering the relative abundance of the two major lignin monomers, guaiacyl (G) and syringyl (S) subunits, we compared the degradability of cell wall material from wild-type Arabidopsis thaliana with a mutant line and a genetically modified line, the lignins of which are enriched in G and S subunits, respectively.

Results

Arabidopsis tissue containing G- and S-rich lignins had the same saccharification performance as the wild type when subjected to enzyme hydrolysis without pretreatment. After a 24-hour incubation period, less than 30% of the total glucan was hydrolyzed. By contrast, when liquid hot water (LHW) pretreatment was included before enzyme hydrolysis, the S-lignin-rich tissue gave a much higher glucose yield than either the wild-type or G-lignin-rich tissue. Applying a hot-water washing step after the pretreatment did not lead to a further increase in final glucose yield, but the initial hydrolytic rate was doubled.

Conclusions

Our analyses using the model plant A. thaliana revealed that lignin composition affects the enzymatic digestibility of LHW pretreated plant material. Pretreatment is more effective in enhancing the saccharification of A. thaliana cell walls that contain S-rich lignin. Increasing lignin S monomer content through genetic engineering may be a promising approach to increase the efficiency and reduce the cost of biomass to biofuel conversion.     

2种纤维素酶水解效果比较及酶蛋白组分分析

比较了自产纤维素酶和商品纤维素酶的水解效果,并采用超滤、层析、SDS-PAGE相结合的方法分析2种纤维素酶蛋白组分的差异。里氏木霉以纸浆为C源合成的自产纤维素酶的水解得率高于商品纤维素酶,自产纤维素酶水解48h的得率为66.24%,商品纤维素酶的得率为52.19%。自产纤维素酶中存在着Cel6A酶组分和XYNⅡ酶组分,而商品纤维素酶中没有检测到这2种酶组分。自产纤维素酶和商品纤维素酶的Cel1A酶组分和Cel7A酶组分间存在着分布和含量上的差异。自产纤维素酶在相对分子质量(2.5～3.5)×104范围内存在着几条蛋白条带,而商品纤维素酶则是在相对分子质量3.5×104附近存在着几条蛋白条带。     

Enhancing the enzymatic hydrolysis of lignocellulosic biomass by increasing the carboxylic acid content of the associated lignin

To assess the effects that the physical and chemical properties of lignin might have on the enzymatic hydrolysis of pretreated lignocellulosic substrates, protease treated lignin (PTL) and cellulolytic enzyme lignin (CEL) fractions, isolated from steam and organosolv pretreated corn stover, poplar, and lodgepole pine, were prepared and characterized. The adsorption of cellulases to the isolated lignin preparations corresponded to a Langmuir adsorption isotherm. It was apparent that, rather than the physical properties of the isolated lignin, the carboxylic acid functionality of the isolated lignin, as determined by FTIR and NMR spectroscopy, had much more of an influence when lignin was added to typical hydrolysis of pure cellulose (Avicel). An increase in the carboxylic content of the lignin preparation resulted in an increased hydrolysis yield. These results suggested that the carboxylic acids within the lignin partially alleviate non-productive binding of cellulases to lignin. To try to confirm this possible mechanism, dehydrogenative polymers (DHP) of monolignols were synthesized from coniferyl alcohol (CA) and ferulic acid (FA), and these model compounds were added to a typical enzymatic hydrolysis of Avicel. The DHP from FA, which was enriched in carboxylic acid groups compared with the DHP from CA, adsorbed a lower mount of cellulases and did not decrease hydrolysis yields when compared to the DHP from CA, which decreased the hydrolysis of Avicel by 8.4%. Thus, increasing the carboxylic acid content of the lignin seemed to significantly decrease the non-productive binding of cellulases and consequently increased the enzymatic hydrolysis of the cellulose.     

A kinetic study of Trichoderma reesei Cel7B catalyzed cellulose hydrolysis

One prominent feature of Trichoderma reesei (Tr) endoglucanases catalyzed cellulose hydrolysis is that the reaction slows down quickly after it starts (within minutes). But the mechanism of the slowdown is not well understood. A structural model of Tr- Cel7B catalytic domain bound to cellulose was built computationally and the potentially important binding residues were identified and tested experimentally. The 13 tested mutants show different binding properties in the adsorption to phosphoric acid swollen cellulose and filter paper. Though the partitioning parameter to filter paper is about 10 times smaller than that to phosphoric acid swollen cellulose, a positive correlation is shown for two substrates. The kinetic studies show that the reactions slow down quickly for both substrates. This slowdown is not correlated to the binding constant but anticorrelated to the enzyme initial activity. The amount of reducing sugars released after 24 h by Cel7B in phosphoric acid swollen cellulose, Avicel and filter paper cellulose hydrolysis is correlated with the enzyme activity against a soluble substrate p-nitrophenyl lactoside. Six of the 13 tested mutants, including N47A, N52D, S99A, N323D, S324A, and S346A, yield ∼15–35% more reducing sugars than the wild type (WT) Cel7B in phosphoric acid swollen cellulose and filter paper hydrolysis. This study reveals that the slowdown of the reaction is not due to the binding of the enzyme to cellulose. The activity of Tr- Cel7B against the insoluble substrate cellulose is determined by the enzyme’s capability in hydrolyzing the soluble substrate.     

Evaluating the distribution of cellulases and the recycling of free cellulases during the hydrolysis of lignocellulosic substrates

The recycling of cellulase enzymes is one potential strategy for reducing the cost of the enzymatic hydrolysis step during the bioconversion of lignocellulosics to ethanol. To determine the influence of lignin on the post-hydrolysis distribution of cellulase enzymes between the liquid and solid phases, the hydrolysis of Avicel was compared to an organosolv-pretreated Douglas fir substrate with a lignin content of 3.0%. After a 12 h hydrolysis reaction on Avicel, 90% of the added cellulases (including beta-glucosidases) remained "free" in the liquid phase compared to only 65% in the case of the hydrolysis of the organosolv-pretreated Douglas fir substrate. The readsorption of free cellulases by supplementing the hydrolysis reaction with fresh substrate was explored as a potential means of recovering the free cellulases that remain in the liquid phase after hydrolysis. The Langmuir adsorption isotherm was used to develop a model predicting that 82% of the free cellulases could be recovered via readsorption onto fresh substrates during the hydrolysis of an ethanol-pretreated mixed softwood substrate with a lignin content of 6%. Recoverable free cellulase values of 85% and 88% based on cellulase activity and protein content, respectively, were obtained after experimental verification of the model. The readsorption of free cellulases onto fresh lignocellulosic substrates was shown to be an effective method for free enzyme recovery.     

Novel Penicillium cellulases for total hydrolysis of lignocellulosics

The (hemi)cellulolytic systems of two novel lignocellulolytic Penicillium strains (Penicillium pulvillorum TUB F-2220 and P. cf. simplicissimum TUB F-2378) have been studied. The cultures of the Penicillium strains were characterized by high cellulase and β-glucosidase as well moderate xylanase activities compared to the Trichoderma reesei reference strains QM 6a and RUTC30 (volumetric or per secreted protein, respectively). Comparison of the novel Penicillium and T. reesei secreted enzyme mixtures in the hydrolysis of (ligno)cellulose substrates showed that the F-2220 enzyme mixture gave higher yields in the hydrolysis of crystalline cellulose (Avicel) and similar yields in hydrolysis of pre-treated spruce and wheat straw than enzyme mixture secreted by the T. reesei reference strain. The sensitivity of the Penicillium cellulase complexes to softwood (spruce) and grass (wheat straw) lignins was lignin and temperature dependent: inhibition of cellulose hydrolysis in the presence of wheat straw lignin was minor at 35 °C while at 45 °C by spruce lignin a clear inhibition was observed. The two main proteins in the F-2220 (hemi)cellulase complex were partially purified and identified by peptide sequence similarity as glycosyl hydrolases (cellobiohydrolases) of families 7 and 6. Adsorption of the GH7 enzyme PpCBH1 on cellulose and lignins was studied showing that the lignin adsorption of the enzyme is temperature and pH dependent. The ppcbh1 coding sequence was obtained using PCR cloning and the translated amino acid sequence of PpCBH1 showed up to 82% amino acid sequence identity to known Penicillium cellobiohydrolases.     

Preparation and enzymatic behavior of surfactant-enveloped enzymes for glycosynthesis in nonaqueous aprotic media

Surfactant-enveloped enzymes (SEEs) were prepared from pure cellulases, cellobiohydrolase I and endoglucanase I (Cel7A and Cel7B, respectively), via simply freeze-drying water-in-oil emulsions, wherein the aqueous phase containing each cellulase was stabilized with the nonionic surfactant, dioleyl-N-d-glucona-l-glutamate. The enzymatic tolerance of SEEs to various nonaqueous solvents was investigated, aiming at a novel synthetic approach in biocatalytic glycoengineering. SEE-Cel7A preserved ca. 67% of the original activity after 3 h incubation in lithium chloride (LiCl)/dimethylacetamide (DMAc) that is a good solvent for carbohydrates but completely deactivates intact enzymes. This excellent enzymatic durability depended on the preparation conditions of SEEs, e.g. pH and salt species of the aqueous phase during SEE preparation. SEE-Cel7A or SEE-Cel7B was applied as a biocatalyst to synthesize cellulose, a sugar polymer which is insoluble in common solvents but dissolves in LiCl/DMAc. Both SEEs could catalyze the direct dehydration of cellobiose without any activation of the anomeric carbon, a property that is indispensable for conventional chemo-enzymatic synthesis. The SEE-Cel7A provided short-chain cellulose with the degree of polymerization (DP) ca. 20, and longer-chain cellulose with DP ca. 60 was preferentially obtained by the SEE-Cel7B, possibly through preferential reverse hydrolysis instead of inherent hydrolysis. Nonaqueous SEE-mediated biocatalysis using inexpensive glycohydrolases and sugars that do not need to be chemically modified beforehand would have potentially wide applications in glycoengineering.     

Characterization of modular bifunctional processive endoglucanase Cel5 from Hahella chejuensis KCTC 2396

Cel5 from marine Hahella chejuensis is composed of glycoside hydrolase family-5 (GH5) catalytic domain (CD) and two carbohydrate binding modules (CBM6-2). The enzyme was expressed in Escherichia coli and purified to homogeneity. The optimum endoglucanase and xylanase activities of recombinant Cel5 were observed at 65 °C, pH 6.5 and 55 °C, pH 5.5, respectively. It exhibited K _m of 1.8 and 7.1 mg/ml for carboxymethyl cellulose and birchwood xylan, respectively. The addition of Ca²⁺ greatly improved thermostability and endoglucanase activity of Cel5. The Cel5 retained 90 % of its endoglucanase activity after 24 h incubation in presence of 5 M concentration of NaCl. Recombinant Cel5 showed production of cellobiose after hydrolysis of cellulosic substrates (soluble/insoluble) and methylglucuronic acid substituted xylooligosaccharides after hydrolysis of glucuronoxylans by endo-wise cleavage. These results indicated that Cel5 as bifunctional enzyme having both processive endoglucanase and xylanase activities. The multidomain structure of Cel5 is clearly distinguished from the GH5 bifunctional glycoside hydrolases characterized to date, which are single domain enzymes. Sequence analysis and homology modeling suggested presence of two conserved binding sites with different substrate specificities in CBM6-2 and a single catalytic site in CD. Residues Glu132 and Glu219 were identified as key catalytic amino acids by sequence alignment and further verified by using site directed mutagenesis. CBM6-2 plays vital role in catalytic activity and thermostability of Cel5. The bifunctional activities and multiple substrate specificities of Cel5 can be utilized for efficient hydrolysis of cellulose and hemicellulose into soluble sugars.     

Engineering of Family-5 Glycoside Hydrolase (Cel5A) from an Uncultured Bacterium for Efficient Hydrolysis of Cellulosic Substrates

Cel5A, an endoglucanase, was derived from the metagenomic library of vermicompost. The deduced amino acid sequence of Cel5A shows high sequence homology with family-5 glycoside hydrolases, which contain a single catalytic domain but no distinct cellulose-binding domain. Random mutagenesis and cellulose-binding module (CBM) fusion approaches were successfully applied to obtain properties required for cellulose hydrolysis. After two rounds of error-prone PCR and screening of 3,000 mutants, amino acid substitutions were identified at various positions in thermotolerant mutants. The most heat-tolerant mutant, Cel5A_2R2, showed a 7-fold increase in thermostability. To enhance the affinity and hydrolytic activity of Cel5A on cellulose substrates, the family-6 CBM from Saccharophagus degradans was fused to the C-terminus of the Cel5A_2R2 mutant using overlap PCR. The Cel5A_2R2-CBM6 fusion protein showed 7-fold higher activity than the native Cel5A on Avicel and filter paper. Cellobiose was a major product obtained from the hydrolysis of cellulosic substrates by the fusion enzyme, which was identified by using thin layer chromatography analysis.     

Synergistic enhancement of cellobiohydrolase performance on pretreated corn stover by addition of xylanase and esterase activities

Significant increases in the depolymerization of corn stover cellulose by cellobiohydrolase I (Cel7A) from Trichoderma reesei were observed using small quantities of non-cellulolytic cell wall-degrading enzymes. Purified endoxylanase (XynA), ferulic acid esterase (FaeA), and acetyl xylan esterase (Axe1) all enhanced Cel7A performance on corn stover subjected to hot water pretreatment. In all cases, the addition of these activities improved the effectiveness of the enzymatic hydrolysis in terms of the quantity of cellulose converted per milligram of total protein. Improvement in cellobiose release by the addition of the non-cellulolytic enzymes ranged from a 13-84% increase over Cel7A alone. The most effective combinations included the addition of both XynA and Axe1, which synergistically enhance xylan conversions resulting in additional synergistic improvements in glucan conversion. Additionally, we note a direct relationship between enzymatic xylan removal in the presence of XynA and the enhancement of cellulose hydrolysis by Cel7A.     

Liquid chromatography combined with mass spectrometry for the investigation of endoglucanase selectivity on carboxymethyl cellulose

Endoglucanases are useful tools in the chemical structure analysis of cellulose derivatives. However, knowledge on the endoglucanase selectivity, which is of central importance for data interpretation, is still limited. In this study, new reverse-phase liquid chromatography mass spectrometry (LC–MS) methods were developed to investigate the selectivity of the endoglucanases Cel5A, Cel7B, Cel45A, and Cel74A from the filamentous fungus Trichoderma reesei. The aim was to improve the identification of the regioisomers in the complex mixtures that are obtained after enzymatic hydrolysis. Reduction followed by per-O-methylation was performed in order to improve the separation in reverse-phase LC, increase MS sensitivity, and to facilitate structure analysis by MS/MS of O-carboxymethyl glucose and cellooligosaccharides. The cellulose selective enzymes that were investigated displayed interesting differences in enzyme selectivity on CMC substrates.     

Cloning, expression, and characterization of novel thermostable family 7 cellobiohydrolases

As part of the effort to find better cellulases for bioethanol production processes, we were looking for novel GH-7 family cellobiohydrolases, which would be particularly active on insoluble polymeric substrates and participate in the rate-limiting step in the hydrolysis of cellulose. The enzymatic properties were studied and are reported here for family 7 cellobiohydrolases from the thermophilic fungi Acremonium thermophilum, Thermoascus aurantiacus, and Chaetomium thermophilum. The Trichoderma reesei Cel7A enzyme was used as a reference in the experiments. As the native T. aurantiacus Cel7A has no carbohydrate-binding module (CBM), recombinant proteins having the CBM from either the C. thermophilum Cel7A or the T. reesei Cel7A were also constructed. All these novel acidic cellobiohydrolases were more thermostable (by 4-10 degrees C) and more active (two- to fourfold) in hydrolysis of microcrystalline cellulose (Avicel) at 45 degrees C than T. reesei Cel7A. The C. thermophilum Cel7A showed the highest specific activity and temperature optimum when measured on soluble substrates. The most effective enzyme for Avicel hydrolysis at 70 degrees C, however, was the 2-module version of the T. aurantiacus Cel7A, which was also relatively weakly inhibited by cellobiose. These results are discussed from the structural point of view based on the three-dimensional homology models of these enzymes.