Membrane binding motif of the P-type cardiotoxin

Carditoxins (CTXs) from cobra snake venoms, the basic 60-62 residue all-beta sheet polypeptides, are known to bind to and impair the function of cell membranes. To assess the membrane induced conformation and orientation of CTXs, the interaction of the P-type cardiotoxin II from Naja oxiana snake venom (CTII) with perdeuterated dodecylphosphocholine (DPC) was studied using ( 1 )H-NMR spectroscopy and diffusion measurements. Under conditions where the toxin formed a well-defined complex with DPC, the spatial structure of CTII with respect to the presence of tightly bound water molecules in loop II, was calculated using the torsion angle dynamics program DYANA. The structure was found to be similar, except for subtle changes in the tips of all three loops, to the previously described "major" form of CTII in aqueous solution illustrated by the "trans" configuration of the Val7-Pro8 peptide bond. No "minor" form with the "cis" configuration of the above bond was found in the micelle-bound state. The broadening of the CTII backbone proton signals by 5, 16-doxylstearate relaxation probes, together with modeling based on the spatial structure of CTII, indicated a periphery mode of binding of the toxin molecule to the micelle and revealed its micelle interacting domain. The latter includes a hydrophobic region of CTII within the extremities of loops I and III (residues 5-11, 46-50), the basement of loop II (residues 24-29,31-37) and the belt of polar residues encircling these loops (lysines 4,5,12,23,50, serines 11,46, histidine 31, arginine 36). It is suggested that this structural motif and the mode of binding can be realized during interaction of CTXs with lipid and biological membranes.     

Interaction of the P-type cardiotoxin with phospholipid membranes.

The cardiotoxin (cytotoxin II, or CTII) isolated from cobra snake (Naja oxiana) venom is a 60-residue basic membrane-active protein featuring three-finger beta sheet fold. To assess possible modes of CTII/membrane interaction 31P- and 1H-NMR spectroscopy was used to study binding of the toxin and its effect onto multilamellar vesicles (MLV) composed of either zwitterionic or anionic phospholipid, dipalmitoylglycerophosphocholine (Pam2Gro-PCho) or dipalmitoylglycerophosphoglycerol (Pam2Gro-PGro), respectively. The analysis of 1H-NMR linewidths of the toxin and 31P-NMR spectral lineshapes of the phospholipid as a function of temperature, lipid-to-protein ratios, and pH values showed that at least three distinct modes of CTII interaction with membranes exist: (a) nonpenetrating mode; in the gel state of the negatively charged MLV the toxin is bound to the surface electrostatically; the binding to Pam2Gro-PCho membranes was not observed; (b) penetrating mode; hydrophobic interactions develop due to penetration of the toxin into Pam2Gro-PGro membranes in the liquid-crystalline state; it is presumed that in this mode CTII is located at the membrane/water interface deepening the side-chains of hydrophobic residues at the tips of the loops 1-3 down to the boundary between the glycerol and acyl regions of the bilayer; (c) the penetrating mode gives way to isotropic phase, stoichiometrically well-defined CTII/phospholipid complexes at CTII/lipid ratio exceeding a threshold value which was found to depend at physiological pH values upon ionization of the imidazole ring of His31. Biological implications of the observed modes of the toxin-membrane interactions are discussed.     

Solution structure of Escherichia coli Par10: The prototypic member of the Parvulin family of peptidyl-prolyl cis/trans isomerases

E. coli Par10 is a peptidyl-prolyl cis/trans isomerase (PPIase) from Escherichia coli catalyzing the isomerization of Xaa-Pro bonds in oligopeptides with a broad substrate specificity. The structure of E. coli Par10 has been determined by multidimensional solution-state NMR spectroscopy based on 1207 conformational constraints (1067 NOE-derived distances, 42 vicinal coupling-constant restraints, 30 hydrogen-bond restraints, and 68 phi/psi restraints derived from the Chemical Shift Index). Simulated-annealing calculations with the program ARIA and subsequent refinement with XPLOR yielded a set of 18 convergent structures with an average backbone RMSD from mean atomic coordinates of 0.50 A within the well-defined secondary structure elements. E. coli Par10 is the smallest known PPIase so far, with a high catalytic efficiency comparable to that of FKBPs and cyclophilins. The secondary structure of E. coli Par10 consists of four helical regions and a four-stranded antiparallel beta-sheet. The N terminus forms a beta-strand, followed by a large stretch comprising three alpha-helices. A loop region containing a short beta-strand separates these helices from a fourth alpha-helix. The C terminus consists of two more beta-strands completing the four-stranded anti-parallel beta-sheet with strand order 2143. Interestingly, the third beta-strand includes a Gly-Pro cis peptide bond. The curved beta-strand forms a hydrophobic binding pocket together with alpha-helix 4, which also contains a number of highly conserved residues. The three-dimensional structure of Par10 closely resembles that of the human proteins hPin1 and hPar14 and the plant protein Pin1At, belonging to the same family of highly homologous proteins.     

NMR structure of the alpha-hemoglobin stabilizing protein: insights into conformational heterogeneity and binding

The structure of alpha-hemoglobin stabilizing protein (AHSP), a molecular chaperone for free alpha-hemoglobin, has been determined using NMR spectroscopy. The protein native state shows conformational heterogeneity attributable to the isomerization of the peptide bond preceding a conserved proline residue. The two equally populated cis and trans forms both adopt an elongated antiparallel three alpha-helix bundle fold but display major differences in the loop between the first two helices and at the C terminus of helix 3. Proline to alanine single point mutation of the residue Pro-30 prevents the cis/trans isomerization. The structure of the P30A mutant is similar to the structure of the trans form of AHSP in the loop 1 region. Both the wild-type AHSP and the P30A mutant bind to alpha-hemoglobin, and the wild-type conformational heterogeneity is quenched upon complex formation, suggesting that just one conformation is the active form. Changes in chemical shift observed upon complex formation identify a binding interface comprising the C terminus of helix 1, the loop 1, and the N terminus of helix 2, with the exposed residues Phe-47 and Tyr-51 being attractive targets for molecular recognition. The characteristics of this interface suggest that AHSP binds at the intradimer alpha1beta1 interface in tetrameric HbA.     

Interaction of a bacterially expressed peptide from the receptor binding domain of Pseudomonas aeruginosa pili strain PAK with a cross-reactive antibody: conformation of the bound peptide

The C-terminal receptor binding region of Pseudomonas aeruginosa pilin protein strain PAK (residues 128-144) has been the target for the design of a vaccine effective against P. aeruginosa infections. We have recently cloned and expressed a (15)N-labeled PAK pilin peptide spanning residues 128-144 of the PAK pilin protein. The peptide exists as a major (trans) and minor (cis) species in solution, arising from isomerization around a central Ile(138)-Pro(139) peptide bond. The trans isomer adopts two well-defined turns in solution, a type I beta-turn spanning Asp(134)-Glu-Gln-Phe(137) and a type II beta-turn spanning Pro(139)-Lys-Gly-Cys(142). The cis isomer adopts only one well-defined type II beta-turn spanning Pro(139)-Lys-Gly-Cys(142) but displays evidence of a less ordered turn spanning Asp(132)-Gln-Asp-Glu(135). These turns have been implicated in cross-reactive antibody recognition. (15)N-edited NMR spectroscopy was used to study the binding of the (15)N-labeled PAK pilin peptide to an Fab fragment of a cross-reactive monoclonal antibody, PAK-13, raised against the intact PAK pilus. The results of these studies are as follows: the trans and cis isomers bind with similar affinity to the Fab, despite their different topologies; both isomers maintain the conformational integrity of their beta-turns when bound; binding leads to the preferential stabilization of the first turn over the second turn in each isomer; and binding leads to the perturbation of resonances within regions of the trans and cis backbone that undergo microsecond to millisecond motions. These slow motions may play a role in induced fit binding of the first turn to Fab PAK-13, which would allow the same antibody combining site to accommodate either trans or cis topology. More importantly for vaccine design, these motions may also play a role in the development of a broad-spectrum vaccine capable of generating an antibody therapeutic effective against the multiple strains of P. aeruginosa.     

Solution structure of the single-domain prolyl cis/trans isomerase PIN1At from Arabidopsis thaliana

The 119-amino acid residue prolyl cis/trans isomerase from Arabidopsis thaliana (PIN1At) is similar to the catalytic domain of the human hPIN1. However, PIN1At lacks the N-terminal WW domain that appears to be essential for the hPIN1 function. Here, the solution structure of PIN1At was determined by three-dimensional nuclear magnetic resonance spectroscopy. The PIN1At fold could be superimposed on that of the catalytic domain of hPIN1 and had a 19 residue flexible loop located between strand beta1 and helix alpha1. The dynamical features of this beta1/alpha1-loop, which are characteristic for a region involved in protein-protein interactions, led to exchange broadening in the NMR spectra. When sodium sulfate salt was added to the protein sample, the beta1/alpha1 loop was stabilized and, hence, a complete backbone resonance assignment was obtained. Previously, with a phospho-Cdc25 peptide as substrate, PIN1At had been shown to catalyze the phosphoserine/phosphothreonine prolyl cis/trans isomerization specifically. To map the catalytic site of PIN1At, the phospho-Cdc25 peptide or sodium sulfate salt was added in excess to the protein and chemical shift changes in the backbone amide protons were monitored in the (1)H(N)-(15)N heteronuclear single quantum coherence spectrum. The peptide caused perturbations in the loops between helix alpha4 and strand beta3, between strands beta3 and beta4, in the alpha3 helix, and in the beta1/alpha1 loop. The amide groups of the residues Arg21 and Arg22 showed large chemical shift perturbations upon phospho-Cdc25 peptide or sulfate addition. We conclude that this basic cluster formed by Arg21 and Arg22, both located in the beta1/alpha1 loop, is homologous to that found in the hPIN1 crystal structure (Arg68 and Arg69), which also is involved in sulfate ion binding. We showed that the sulfate group competed for the interaction between PIN1At and the phospho-Cdc25 peptide. In the absence of the WW domain, three hydrophobic residues (Ile33, Ile34, and Leu35) located in the long flexible loop and specific for the plant PIN-type peptidyl prolyl cis/trans isomerases (PPIases) could be an additional interaction site in PIN1At. However, phospho-peptide addition did not affect the resonances of these residues significantly. Electrostatic potential calculations revealed a negatively charged area not found in hPIN1 on the PIN1At molecular surface, which corresponds to the surface shielded by the WW domain in hPIN1. Based on our experimental results and the molecular specificities of the PIN1At enzyme, functional implications of the lack of WW domains in this plant PIN-type PPIase will be discussed.     

1H-nmr studies on the structure of a new thionin from barley endosperm

A new thionin from barley, ω-hordothionin, has been shown to exist in aqueous solution as a mixture of two different isoforms in a 3:2 ratio, as revealed by a complete analysis of its two-dimensional ¹H-nmr spectra. The conformational heterogeneity arises frtm cis–trans isomerism ahout the Phe 12–Pro 13 peptide bond, where the major, form corresponds to the cis conformation. The complete assignment of chemical shifts and nuclear Overhaiiser effects (NOES) of the two isoforms allow a detailed comparative analysis of their conformational properties, even though a complete calculation of their solution structures is not possible because of a somewhat limited number of NOE constraints. Structures for the two isomers could be modeled, however, on the basis of the high structural homology between ω-hordothionin and related γ-thionins, and under the conditions of satisfying all observed experimental data. The two isoforms adopt practically identical global folds and the structural changes imposed by cis–trans isomerization are confined to the region proximal to Pro 13. The cis–trans isomerism occurs in a conserved loop connecting the first β-strand of the triple-stranded antiparallel β-sheet and the α-helix. A comparative analysis of the sequences of this loop in the different thionins suggests that the cis–trans equilibrium about the X-Pro peptide bond depends on the size of the side chain of X (X = Gly in γ-thionins and Phe in ω-thionin). The structural homology of this new thionin with γ-thionins as well as with some scorpion toxins and insect defensins suggests that these proteins may share a common mode of functional activity. © 1995 John Wiley & Sons, Inc.     

Modeling conformational changes in cyclosporin A.

NMR and X-ray structures for the immunosuppressant cyclosporin A (CsA) reveal a remarkable difference between the unbound (free) conformation in organic solvents and the conformation bound to cyclophilin. We have performed computer simulations of the molecular dynamics of CsA under a variety of conditions and confirmed the stability of these two conformations at room temperature in water and in vacuum. However, when the free conformation was modeled in vacuum at 600 K, a transition pathway leading to the bound conformation was observed. This involved a change in the cis MeLeu-9 peptide bond to a trans conformation and the movement of the side chains forming the dominant hydrophobic cluster (residues MeBmt-1, MeLeu-4, MeLeu-6, and MeLeu-10) to the opposite side of the plane formed by the backbone atoms in the molecular ring. The final conformation had a backbone RMS deviation from the bound conformation of 0.53 A and was as stable in dynamics simulations as the bound conformation. Our calculations allowed us to make a detailed analysis of a transition pathway between the free and the bound conformations of CsA and to identify two distinct regions of coordinated movement in CsA, both of which underwent transitions independently.     

Solution structure of the main alpha-amylase inhibitor from amaranth seeds.

The most abundant alpha-amylase inhibitor (AAI) present in the seeds of Amaranthus hypochondriacus, a variety of the Mexican crop plant amaranth, is the smallest polypeptide (32 residues) known to inhibit alpha-amylase activity of insect larvae while leaving that of mammals unaffected. In solution, 1H NMR reveals that AAI isolated from amaranth seeds adopts a major trans (70%) and minor cis (30%) conformation, resulting from slow cis-trans isomerization of the Val15-Pro16 peptide bond. Both solution structures have been determined using 2D 1H-NMR spectroscopy and XPLOR followed by restrained energy refinement in the consistent-valence force field. For the major isomer, a total of 563 distance restraints, including 55 medium-range and 173 long-range ones, were available from the NOESY spectra. This rather large number of constraints from a protein of such a small size results from a compact fold, imposed through three disulfide bridges arranged in a cysteine-knot motif. The structure of the minor cis isomer has also been determined using a smaller constraint set. It reveals a different backbone conformation in the Pro10-Pro20 segment, while preserving the overall global fold. The energy-refined ensemble of the major isomer, consisting of 20 low-energy conformers with an average backbone rmsd of 0.29 +/- 0.19 A and no violations larger than 0.4 A, represents a considerable improvement in precision over a previously reported and independently performed calculation on AAI obtained through solid-phase synthesis, which was determined with only half the number of medium-range and long-range restraints reported here, and featured the trans isomer only. The resulting differences in ensemble precision have been quantified locally and globally, indicating that, for regions of the backbone and a good fraction of the side chains, the conformation is better defined in the new solution structure. Structural comparison of the solution structure with the X-ray structure of the inhibitor when bound to its alpha-amylase target in Tenebrio molitor shows that the backbone conformation is only slightly adjusted on complexation, while that of the side chains involved in protein-protein contacts is similar to those present in solution. Therefore, the overall conformation of AAI appears to be predisposed to binding to its target alpha-amylase, confirming the view that it acts as a lid on top of the alpha-amylase active site.     

The UAA/GAN internal loop motif: a new RNA structural element that forms a cross-strand AAA stack and long-range tertiary interactions

Analysis of aligned RNA sequences and high-resolution crystal structures has revealed a new RNA structural element, termed the UAA/GAN motif. Found in internal loops of the 23 S rRNA, as well as in RNase P RNA and group I and II introns, this six-nucleotide motif adopts a distinctive local structure that includes two base-pairs with non-canonical conformations and three conserved adenine bases, which form a cross-strand AAA stack in the minor groove. Most importantly, the motif invariably forms long-range tertiary contacts, as the AAA stack typically forms A-minor interactions and the flipped-out N nucleotide forms additional contacts that are specific to the structural context of each loop. The widespread presence of this motif and its propensity to form long-range contacts suggest that it plays a critical role in defining the architectures of structured RNAs.     

Photomodulation of conformational states. III. Water-soluble bis-cysteinyl-peptides with (4-aminomethyl) phenylazobenzoic acid as backbone constituent

In previous studies we have shown that light-induced cis/trans isomerization of the azobenzene moiety in cyclo-[Ala-Cys-Ala-Thr-Cys-Asp-Gly-Phe-AMPB] [AMPB: (4-aminomethyl)phenylazobenzoic acid] leads both in the monocyclic and in the oxidized bicyclic form to markedly differentiated conformational states in DMSO, a fact that lends itself for photomodulation of the redox potential of such bis-cysteinyl-peptides. For this purpose water-soluble systems are required, and this was achieved by replacing three residues outside the Cys-Ala-Thr-Cys active-site motif of thioredoxin reductase with lysines. The resulting cyclo-[Lys-Cys-Ala-Thr-Cys-Asp-Lys-Lys-AMPB] fully retains its photoresponsive properties in water as well assessed by uv and CD measurements. Paralleling results of the previously investigated azobenzene-containing cyclic peptides, the trans --> cis isomerization of the water-soluble monocyclic and oxidized bicyclic peptide is accompanied by a marked transition from a well-defined conformation to an ensemble of possible conformations. However, the conformational preferences are very dissimilar from those of the DMSO-soluble peptides. In fact, hydrogen bonds as well as secondary structure elements were found that change in the mono- and bicyclic peptide upon irradiation. The photo switch between different turn types and hydrogen bonding networks offers the structural rational for the significantly differentiated redox potentials, but also the possibility of monitoring by femtosecond uv-vis and ir spectroscopy fast and ultra fast backbone rearrangement processes following the electronic trans --> cis isomerization.     

Structures of the contryphan family of cyclic peptides. Role of electrostatic interactions in cis-trans isomerism

The contryphan family of cyclic peptides, isolated recently from various species of cone shell, has the conserved sequence motif NH(3)(+)-X(1)COD-WX(5)PWC-NH(2), where X(1) is either Gly or absent, O is 4-trans-hydroxyproline, and X(5) is Glu, Asp, or Gln. The solution structures described herein of two new naturally occurring contryphan sequences, contryphan-Sm and des[Gly1]-contryphan-R, are similar to those of contryphan-R, the structure of which has been determined recently [Pallaghy et al. (1999) Biochemistry 38, 11553-11559]. The (1)H NMR chemical shifts of another naturally occurring peptide, contryphan-P, indicate that it also adopts a similar structure. All of these contryphans exist in solution as a mixture of two conformers due to cis-trans isomerization about the Cys2-Hyp3 peptide bond. The lower cis-trans ratio for contryphan-Sm enabled elucidation of the 3D structure of both its major and its minor forms, for which the patterns of (3)J(H)(alpha)(HN) coupling constants are very different. As with contryphan-R, the structure of the major form of contryphan-Sm (cis Cys2-Hyp3 peptide bond) contains an N-terminal chain reversal and a C-terminal type I beta-turn. The minor conformer (trans peptide bond) forms a hairpin structure with sheetlike hydrogen bonds and a type II beta-turn, with the D-Trp4 at the 'Gly position' of the turn. The ratio of conformers arising from cis-trans isomerism around the peptide bond preceding Hyp3 is sensitive to both the amino acid sequence and the solution conditions, varying from 2.7:1 to 17:1 across the five sequences. The sequence and structural determinants of the cis-trans isomerism have been elucidated by comparison of the cis-trans ratios for these peptides with those for contryphan-R and an N-acetylated derivative thereof. The cis-trans ratio is reduced for peptides in which either the charged N-terminal ammonium or the X(5) side-chain carboxylate is neutralized, implying that an electrostatic interaction between these groups stabilizes the cis conformer relative to the trans. These results on the structures and cis-trans equilibrium of different conformers suggest a paradigm of 'locally determined but globally selected' folding for cyclic peptides and constrained protein loops, where the series of stereochemical centers in the loop dictates the favorable conformations and the equilibrium is determined by a small number of side-chain interactions.     

Catalytic mechanism of cyclophilin as observed in molecular dynamics simulations: pathway prediction and reconciliation of X-ray crystallographic and NMR solution data

Cyclophilins are proteins that catalyze X-proline cis-trans interconversion, where X represents any amino acid. Its mechanism of action has been investigated over the past years but still generates discussion, especially because until recently structures of the ligand in the cis and trans conformations for the same system were lacking. X-ray crystallographic structures for the complex cyclophilin A and HIV-1 capsid mutants with ligands in the cis and trans conformations suggest a mechanism where the N-terminal portion of the ligand rotates during the cis-trans isomerization. However, a few years before, a C-terminal rotating ligand was proposed to explain NMR solution data. In the present study we use molecular dynamics (MD) simulations to generate a trans structure starting from the cis structure. From simulations starting from the cis and trans structures obtained through the rotational pathways, the seeming contradiction between the two sets of experimental data could be resolved. The simulated N-terminal rotated trans structure shows good agreement with the equivalent crystal structure and, moreover, is consistent with the NMR data. These results illustrate the use of MD simulation at atomic resolution to model structural transitions and to interpret experimental data.     

Photoreactions of metarhodopsin III

Meta III is an inactive intermediate thermally formed following light activation of the visual pigment rhodopsin. It is produced from the Meta I/Meta II photoproduct equilibrium of rhodopsin by a thermal isomerization of the protonated Schiff base C=N bond of Meta I, and its chromophore configuration is therefore all-trans 15-syn. In contrast to the dark state of rhodopsin, which catalyzes exclusively the cis to trans isomerization of the C11=C12 bond of its 11-cis 15-anti chromophore, Meta III does not acquire this photoreaction specificity. Instead, it allows for light-dependent syn to anti isomerization of the C15=N bond of the protonated Schiff base, yielding Meta II, and for trans to cis isomerizations of C11=C12 and C9=C10 of the retinal polyene, as shown by FTIR spectroscopy. The 11-cis and 9-cis 15-syn isomers produced by the latter two reactions are not stable, decaying on the time scale of few seconds to dark state rhodopsin and isorhodopsin by thermal C15=N isomerization, as indicated by time-resolved FTIR methods. Flash photolysis of Meta III produces therefore Meta II, dark state rhodopsin, and isorhodopsin. Under continuous illumination, the latter two (or its unstable precursors) are converted as well to Meta II by presumably two different mechanisms.     

Stress and strain in staphylococcal nuclease.

Protein molecules generally adopt a tertiary structure in which all backbone and side chain conformations are arranged in local energy minima; however, in several well-refined protein structures examples of locally strained geometries, such as cis peptide bonds, have been observed. Staphylococcal nuclease A contains a single cis peptide bond between residues Lys 116 and Pro 117 within a type VIa beta-turn. Alternative native folded forms of nuclease A have been detected by NMR spectroscopy and attributed to a mixture of cis and trans isomers at the Lys 116-Pro 117 peptide bond. Analyses of nuclease variants K116G and K116A by NMR spectroscopy and X-ray crystallography are reported herein. The structure of K116A is indistinguishable from that of nuclease A, including a cis 116-117 peptide bond (92% populated in solution). The overall fold of K116G is also indistinguishable from nuclease A except in the region of the substitution (residues 112-117), which contains a predominantly trans Gly 116-Pro 117 peptide bond (80% populated in solution). Both Lys and Ala would be prohibited from adopting the backbone conformation of Gly 116 due to steric clashes between the beta-carbon and the surrounding residues. One explanation for these results is that the position of the ends of the residue 112-117 loop only allow trans conformations where the local backbone interactions associated with the phi and psi torsion angles are strained. When the 116-117 peptide bond is cis, less strained backbone conformations are available. Thus the relaxation of the backbone strain intrinsic to the trans conformation compensates for the energetically unfavorable cis X-Pro peptide bond. With the removal of the side chain from residue 116 (K116G), the backbone strain of the trans conformation is reduced to the point that the conformation associated with the cis peptide bond is no longer favorable.     

Synthesis and application of an azobenzene amino acid as a light-switchable turn element in polypeptides

The synthesis of an azobenzene amino acid (aa) for use as a photo-inducible conformational switch in polypeptides is described. The compound can be easily incorporated into an aa sequence by solid-phase peptide synthesis using standard 9-fluorenylmethoxycarbonyl methods. A reversible conformational change of the peptide backbone is induced by switching between the cis and trans configurations of the azobenzene moiety by irradiation with light of suitable wavelength. Thermal cis --> trans isomerization of this azobenzene aa is slow, enabling detailed structural investigations of the modified peptides, e.g., using NMR techniques. The total time for the synthesis of the photoswitch is typically 4 d, with an overall yield of 40-50%.     

Ultrafast conformational dynamics in cyclic azobenzene peptides of increased flexibility

Structural changes of peptides containing the azobenzene dye 4-aminomethyl-phenylazobenzoic acid (AMPB) are studied with ultrafast spectroscopy. AMPB peptides are a new class of molecules where the photoisomerizable dye azobenzene is linked to the peptide moiety via a flexible methylene spacer. The ultrafast reactions in the femtosecond to nanosecond time domain are investigated for the optical switch AMPB, a linear and cyclic octapeptide, and a bicyclic octapeptide containing an additional disulfide bridge. These molecules with increasing conformational constraints are studied for the cis to trans and the trans to cis photoreactions. For the cis to trans reaction the isomerization of the chromophore occurs fast in the 1-ps range, whereas it is slower (10-ps range) in the trans to cis reaction. In all peptides the structural changes of the chromophore lead to modifications in the peptide structure in the 10-ps-1-ns time range. The results indicate that the chromophore AMPB acts simultaneously as a fast molecular switch and as a sensor for initial conformational dynamics in the peptide. Experiments in the mid-infrared range where the structural changes of the peptide backbone are directly observed demonstrate that the essential part of the structural dynamics in the bicyclic AMPB peptide occurs faster than 10 ns.     

Energetic coupling between native-state prolyl isomerization and conformational protein folding

In folded proteins, prolyl peptide bonds are usually thought to be either trans or cis because only one of the isomers can be accommodated in the native folded protein. For the N-terminal domain of the gene-3 protein of the filamentous phage fd (N2 domain), Pro161 resides at the tip of a beta hairpin and was found to be cis in the crystal structure of this protein. Here we show that Pro161 exists in both the cis and the trans conformations in the folded form of the N2 domain. We investigated how conformational folding and prolyl isomerization are coupled in the unfolding and refolding of N2 domain. A combination of single-mixing and double-mixing unfolding and refolding experiments showed that, in unfolded N2 domain, 7% of the molecules contain a cis-Pro161 and 93% of the molecules contain a trans-Pro161. During refolding, the fraction of molecules with a cis-Pro161 increases to 85%. This implies that 10.3 kJ mol(-1) of the folding free energy was used to drive this 75-fold change in the Pro161 cis/trans equilibrium constant during folding. The stabilities of the forms with the cis and the trans isomers of Pro161 and their folding kinetics could be determined separately because their conformational folding is much faster than the prolyl isomerization reactions in the native and the unfolded proteins. The energetic coupling between conformational folding and Pro161 isomerization is already fully established in the transition state of folding, and the two isomeric forms are thus truly native forms. The folding kinetics are well described by a four-species box model, in which the N2 molecules with either isomer of Pro161 can fold to the native state and in which cis/trans isomerization occurs in both the unfolded and the folded proteins.     

Effect of calcium (II) and magnesium (II) ions on the 18-23 gamma-carboxyglutamic acid containing cyclic peptide loop of bovine prothrombin. An AMBER molecular mechanics study

The effect of calcium (II) and magnesium (II) ions on the conformation of the 18-23 cyclic peptide loop of bovine prothrombin are investigated by the molecular mechanics program AMBER (Assisted Model Building with Energy Refinement). The work is an extension of an earlier paper (Eastman et al., Int. J. Peptide Protein Res. 27, 1986, 530-553) that employed the program ECEPP (Empirical Conformational Energy Program for Peptides). In the absence of either metal ion, or in the presence of either one Ca(II) or one Mg(II) ion, the lowest-energy forms found by AMBER have the Gla21-Pro22 peptide bond in a trans conformation. In the presence of two Ca(II) or Mg(II) ions, the loop form of lowest energy is decidedly cis. The coordination about the Ca(II) and Mg(II) ions is different in both the single and double metal cases. In addition, the peptide chains that emerge from the loop are oriented parallel to each other in the lowest-energy complex with two Ca(II) ions, but are not parallel in the lowest-energy complex with two Mg(II) ions.