Genetic and physical mapping of <Emphasis Type="Italic">Pi36</Emphasis>(t), a novel rice blast resistance gene located on rice chromosome 8

Blast resistance in the indica cultivar (cv.) Q61 was inherited as a single dominant gene in two F₂ populations, F₂-1 and F₂-2, derived from crosses between the donor cv. and two susceptible japonica cvs. Aichi Asahi and Lijiangxintuanheigu (LTH), respectively. To rapidly determine the chromosomal location of the resistance (R) gene detected in Q61, random amplified polymorphic DNA (RAPD) analysis was performed in the F₂-1 population using bulked-segregant analysis (BSA) in combination with recessive-class analysis (RCA). One of the three linked markers identified, BA1126₅₅₀, was cloned and sequenced. The R gene locus was roughly mapped on rice chromosome 8 by comparison of the BA1126₅₅₀ sequence with rice sequences in the databases (chromosome landing). To confirm this finding, seven known markers, including four sequence-tagged-site (STS) markers and three simple-sequence repeat (SSR) markers flanking BA1126₅₅₀ on chromosome 8, were subjected to linkage analysis in the two F₂ populations. The locus was mapped to a 5.8 cM interval bounded by RM5647 and RM8018 on the short arm of chromosome 8. This novel R gene is therefore tentatively designated as Pi36(t). For fine mapping of the Pi36(t) locus, five additional markers including one STS marker and four candidate resistance gene (CRG) markers were developed in the target region, based on the genomic sequence of the corresponding region of the reference japonica cv. Nipponbare. The Pi36(t) locus was finally localized to an interval of about 0.6 cM flanked by the markers RM5647 and CRG2, and co-segregated with the markers CRG3 and CRG4. To physically map this locus, the Pi36(t)-linked markers were mapped by electronic hybridization to bacterial artificial chromosome (BAC) or P1 artificial chromosome (PAC) clones of Nipponbare, and a contig map was constructed in silico through Pairwise BLAST analysis. The Pi36(t) locus was physically delimited to an interval of about 17.0 kb, based on the genomic sequence of Nipponbare.     

Characterization and mapping of <Emphasis Type="Italic">Rpi1</Emphasis>, a gene that confers dominant resistance to stalk rot in maize

The maize inbred lines 1145 (resistant) and Y331 (susceptible), and the F₁, F₂ and BC₁F₁ populations derived from them were inoculated with the pathogen Pythium inflatum Matthews, which causes stalk rot in Zea mays. Field data revealed that the ratio of resistant to susceptible plants was 3:1 in the F₂ population, and 1:1 in the BC₁F₁population, indicating that the resistance to P. inflatum Matthews was controlled by a single dominant gene in the 1145×Y331 cross. The gene that confers resistance to P. inflatum Matthews was designated Rpi1 for resistance to P. inflatum) according to the standard nomenclature for plant disease resistance genes. Fifty SSR markers from 10 chromosomes were first screened in the F₂ population to find markers linked to the Rpi1 gene. The results indicated that umc1702 and mmc0371 were both linked to Rpi1, placing the resistance gene on chromosome 4. RAPD (randomly amplified polymorphic DNA) markers were then tested in the F₂population using bulked segregant analysis (BSA). Four RAPD products were found to show linkage to the Rpi1 gene. Then 27 SSR markers and 8 RFLP markers in the region encompassing Rpi1 were used for fine-scale mapping of the resistance gene. Two SSR markers and four RFLP markers were linked to the Rpi1 gene. Finally, the Rpi1 gene was mapped between the SSR markers bnlg1937 and agrr286 on chromosome 4, 1.6 cM away from the former and 4.1 cM distant from the latter. This is the first time that a dominant gene for resistance to maize stalk rot caused by P. inflatum Matthews has been mapped with molecular marker techniques.     

Molecular mapping of a novel gene, Grh5, conferring resistance to green rice leafhopper (Nephotettix cincticeps Uhler) in rice, Oryza sativa L.

The green rice leafhopper (GRH), Nephotettix cincticeps Uhler, is one of the most serious insect pests affecting cultivated rice (Oryza sativa L.) in temperate regions of East Asia. An accession of the wild rice species, Oryza rufipogon Griff. (W1962), was found to be highly resistant to GRH by an antibiosis test. To understand the genetic basis of the GRH resistance, a BC₁F₁ population derived from a cross between a susceptible Japonica variety, Taichung 65 (T65), and a highly resistant accession W1962 was analyzed by quantitative trait loci (QTL) mapping. A single major QTL for GRH resistance was detected on rice chromosome 8. A nearly isogenic population containing segments of the targeted QTL region derived from W1962 was then developed through advanced backcrossing with marker-assisted selection. Further molecular mapping using a BC₄F₂ population revealed that a new resistance gene, designated as Green rice leafhopper resistance 5 (Grh5), was located on the distal region of the long arm of chromosome 8 and tightly linked to the simple sequence repeat markers RM3754 and RM3761. A nearly isogenic line (NIL) carrying Grh5 was subsequently developed in the progeny of the mapping population. The resistance level of Grh5-NIL was compared with those of developed NILs for GRH resistance and was found to have the highest resistance. The DNA markers found to be closely linked to Grh5 would be useful for marker-assisted selection for the improvement of resistance to GRH in rice.     

The semidwarf gene,sd-1, of rice (Oryza sativa L.). II. Molecular mapping and marker-assisted selection

To establish the location of the semidwarf gene, sd-1, the anthocyanin activator (A), purple node (Pn), purple auricle (Pau), and the isozyme locus, EstI-2, in relation to DNA markers on the molecular linkage map of rice, 20 RFLP markers, previously mapped to the central region of chromosome 1 (McCouch et al. 1988), were mapped onto an F₂ population derived from the cross Taichung 65 (A,Pn,Pau)/Taichung 65 (sd-1). sd-1 and EstI-2 were determined to be linked most tightly to RFLP markers RG 109 and RG 220, which cosegregated with each other. The distance between these RFLP markers and sd-1 was estimated to be 0.8 cM, based on an observed recombination value of 0.8%. The order of genes and markers in this region of chromosome 1 was determined to be sd-1 — (EstI-2 — RG220 — RG109) — RG381 — A — Pn — Pau. To test the efficacy of selection for sd-1 based on these linked markers, 50-day-old F₂ seedlings derived from another cross, Milyang 23/Gihobyeo, were analyzed for marker genotype. At this age, the semidwarf character could not be clearly detected based on phenotype. In addition, plant height was normally distributed in this population, making it difficult to unambiguously identify plants carrying sd-1. Thirteen seedlings homozygous for the sd-1-associated allele at EstI-2, RG220 and RG109, and 13 seedlings homozygous for the Sd-1-associated allele at all three marker loci were selected for further genetic analysis. At 20 days after heading, the culm lengths of these 26 plants were measured and the expected phenotype was confirmed in every case. These 26 plants were then selfed for four generations and F₆ lines were again evaluated to determine whether any recombination among the three molecular markers, or between these markers and the sd-1 gene, could be detected. No recombinants were identified, confirming the tight linkage of these loci and the usefulness of genotypic selection for this recessive semidwarf character prior to the time when it can be evaluated based on phenotype.     

水稻超短根突变体ssr1的遗传分析和基因定位

该研究从甲基磺酸乙酯(EMS)诱变的籼稻‘Kasalath’突变体库中筛选到1个根系超短的突变体,命名为ssr1(super short root 1),8d苗龄突变体的主根和不定根长度分别只有野生型的8.89%和2.29%,其不定根发生正常,但侧根的发生和伸长都受到严重抑制,且根毛也非常短。此外,ssr1植株整体矮小,株高不到野生型的一半。遗传分析结果表明,该突变性状由1对隐性核基因控制。利用图位克隆技术将SSR1基因定位在第9染色体的STS(sequence tagged site)分子标记9g7047K和9g7290K之间,物理距离约为243kb,在定位区间共发现39个预测基因,经分析其中没有已克隆的根系发育基因。对SSR1的定位为进一步克隆该基因和阐明水稻根构型的分子机理奠定了基础。     

Identification and mapping of PmG16, a powdery mildew resistance gene derived from wild emmer wheat

The gene-pool of wild emmer wheat, Triticum turgidum ssp. dicoccoides, harbors a rich allelic repertoire for disease resistance. In the current study, we made use of tetraploid wheat mapping populations derived from a cross between durum wheat (cv. Langdon) and wild emmer (accession G18-16) to identify and map a new powdery mildew resistance gene derived from wild emmer wheat. Initially, the two parental lines were screened with a collection of 42 isolates of Blumeria graminis f. sp. tritici (Bgt) from Israel and 5 isolates from Switzerland. While G18-16 was resistant to 34 isolates, Langdon was resistant only to 5 isolates and susceptible to 42 isolates. Isolate Bgt#15 was selected to differentiate between the disease reactions of the two genotypes. Segregation ratio of F_2-3 and recombinant inbreed line (F₇) populations to inoculation with isolate Bgt#15 indicated the role of a single dominant gene in conferring resistance to Bgt#15. This gene, temporarily designated PmG16, was located on the distal region of chromosome arm 7AL. Genetic map of PmG16 region was assembled with 32 simple sequence repeat (SSR), sequence tag site (STS), Diversity array technology (DArT) and cleaved amplified polymorphic sequence (CAPS) markers and assigned to the 7AL physical bin map (7AL-16). Using four DNA markers we established colinearity between the genomic region spanning the PmG16 locus within the distal region of chromosome arm 7AL and the genomic regions on rice chromosome 6 and Brachypodium Bd1. A comparative analysis was carried out between PmG16 and other known Pm genes located on chromosome arm 7AL. The identified PmG16 may facilitate the use of wild alleles for improvement of powdery mildew resistance in elite wheat cultivars via marker-assisted selection.     

Genetic and physical mapping of Pi37(t), a new gene conferring resistance to rice blast in the famous cultivar St. No. 1

The famous rice cultivar (cv.), St. No. 1, confers complete resistance to many isolates collected from the South China region. To effectively utilize the resistance, a linkage assay using microsatellite markers (SSR) was performed in the three F₂ populations derived from crosses between the donor cv. St. No. 1 and each of the three susceptible cvs. C101PKT, CO39 and AS20-1, which segregated into 3R:1S (resistant/susceptible) ratio, respectively. A total of 180 SSR markers selected from each chromosome equally were screened. The result showed that the two markers RM128 and RM486 located on chromosome 1 were linked to the resistance gene in the respective populations above. This result is not consistent with those previously reported, in which a well-known resistance gene Pif in the St. No. 1 is located on chromosome 11. To confirm this result, additional four SSR markers, which located in the region lanked by RM128 and RM486, were tested. The results showed that markers RM543 and RM319 were closer to, and RM302 and RM212 completely co-segregated with the resistance locus detected in the present study. These results indicated that another resistance gene involved in the St. No. 1, which is located on chromosome 1, and therefore tentatively designated as Pi37(t). To narrow down genomic region of the Pi37(t) locus, eight markers were newly developed in the target region through bioinformatics analysis (BIA) using the publicly available sequences. The linkage analysis with these markers showed that the Pi37(t) locus was mapped to a ≈ 0.8 centimorgans (cM) interval flanked by RM543 and FPSM1, where a total of seven markers co-segregated with it. To physically map the locus, the Pi37(t)-linked markers were landed on the reference sequence of cv. Nipponbare through BIA. A contig map corresponding to the locus was constructed based on the reference sequence aligned by the Pi37(t)-linked markers. Consequently, the Pi37(t) locus was defined to 374 kb interval flanking markers RM543 and FPSM1, where only four candidate genes with the resistance gene conserved structure (NBS-LRR) were further identified to a DNA fragment of 60 kb in length by BIA.     

High-density physical maps reveal that the dominant male-sterile gene Ms3 is located in a genomic region of low recombination in wheat and is not amenable to map-based cloning

In wheat it is essential to know whether a gene is located in a high or low recombination region of the genome before initiating a map-based cloning approach. The objective of this study was to explore the potential feasibility of map-based cloning of the dominant male-sterile gene Ms3 of wheat. High-density physical maps of the short arms of the group-5 chromosomes (5AS, 5BS, and 5DS) of Triticum aestivum L. were constructed by mapping 40 DNA markers on a set of 17 homozygous deletion lines. One hundred RFLP loci were mapped: 35 on 5AS, 37 on 5BS, and 28 on 5DS. A consensus physical map was colinearly aligned with a consensus genetic map of the group-5 short arms. Sixteen of the 17 markers in the consensus genetic map encompass a genetic distance of 25 cM and correspond to the distal region (FL 0.56–0.97) of the consensus physical map. Two rice probes, RG463 and RG901, previously identified to be linked to markers CDO344 and CDO749 (group-5 short arm of wheat), respectively, in the genetic map of rice chromosome 12, map between FL 0.56 and 0.63 in the consensus map. Thus at least a part of the group-5 short arm is homoeologous to a region of chromosome 12 of rice. The genetic map of chromosome arm 5AS was constructed using a population of 139 BC₁ plants derived from a cross between the euploid wheat ”Chris” carrying a dominant male-sterile gene Ms3 and a disomic substitution line in which chromosome 5A of T. aestivum cv Chinese Spring was substituted by chromosome 5A from Triticum turgidum ssp. dicoccoides. The map has a genetic length of 53.4 cM with 11 DNA markers. The initial map showed that the gene Ms3 cosegregated with three markers, WG341, BCD1130 and CDO677. High-resolution mapping using an additional 509 BC₁ plants indicated that the marker WG341 was closely linked to Ms3 at a genetic distance of 0.8 cM. The Ms3 was mapped physically in the region spanning 40% of the arm length from the centromere of 5AS. Therefore, map-based cloning of the Ms3 is not feasible, although WG341 can be used as a useful tag for the Ms3 gene for breeding purposes. Received: 12 December 2000 / Accepted: 26 January 2001     

Chromosomal localization and molecular-marker tagging of the powdery mildew resistance gene (Lv) in tomato

We report the tagging of a powdery mildew [Leveillula taurica (Lév.) Arnaud.] resistance gene (Lv) in tomato using RAPD and RFLP markers. DNA from a resistant (cv Laurica) and a susceptible cultivar were screened with 300 random primers that were used to amplify DNA of resistant and susceptible plants. Four primers yielded fragments that were unique to the resistant line and linked to the resistance gene in an F₂ population. One of these amplified fragments, OP248, with a molecular weight of 0.7 kb, was subsequently mapped to chromosome 12, 1 cM away from CT134. Using RFLP markers located on chromosome 12, it was shown that approximately one half of chromosome 12 (about 42 cM), in the resistant variety is comprised of foreign DNA, presumably introgressed with the resistance gene from the wild species L. chilense. Further analysis of a backcross population revealed that the Lv gene lies in the 5.5-cM interval between RFLP markers, CT211 and CT219. As a prelude to map-based cloning of the Lv gene, we are currently enriching the density of markers in this region by a combination of RAPD primers and other techniques.     

Molecular mapping of <Emphasis Type="Italic">Stb1</Emphasis>, a potentially durable gene for resistance to septoria tritici blotch in wheat

Septoria tritici blotch (STB), caused by the ascomycete Mycosphaerella graminicola (anamorph Septoria tritici), was the most destructive disease of wheat in Indiana and adjacent states before deployment of the resistance gene Stb1 during the early 1970s. Since then, Stb1 has provided durable protection against STB in widely grown wheat cultivars. However, its chromosomal location and allelic relationships to most other STB genes are not known, so the molecular mapping of Stb1 is of great interest. Genetic analyses and molecular mapping were performed for two mapping populations. A total of 148 F₁ plants (mapping population I) were derived from a three-way cross between the resistant line P881072-75-1 and the susceptible lines P881072-75-2 and Monon, and 106 F₆ recombinant-inbred lines (mapping population II) were developed from a cross between the resistant line 72626E2-12-9-1 and the susceptible cultivar Arthur. Bulked-segregant analysis with random amplified polymorphic DNA (RAPD), amplified fragment length polymorphism (AFLP), and microsatellite or simple-sequence repeat (SSR) markers was conducted to identify those that were putatively linked to the Stb1 gene. Segregation analyses confirmed that a single dominant gene controls the resistance to M. graminicola in each mapping population. Two RAPD markers, G7₁₂₀₀ and H19₅₂₀, were tightly linked to Stb1 in wheat line P881072-75-1 at distances of less than 0.68 cM and 1.4 cM, respectively. In mapping population II, the most closely linked marker was SSR Xbarc74, which was 2.8 cM proximal to Stb1 on chromosome 5BL. Microsatellite loci Xgwm335 and Xgwm213 also were proximal to Stb1 at distances of 7.4 cM and 8.3 cM, respectively. The flanking AFLP marker, EcoRI-AGC/MseI-CTA-1, was 8.4 cM distal to Stb1. The two RAPD markers, G7₁₂₀₀ and H19₅₂₀, and AFLP EcoRI-AGC/MseI-CTA-1, were cloned and sequenced for conversion into sequence-characterized amplified region (SCAR) markers. Only RAPD allele H19₅₂₀ could be converted successfully, and none of the SCAR markers was diagnostic for the Stb1 locus. Analysis of SSR and the original RAPD primers on several 5BL deletion stocks positioned the Stb1 locus in the region delineated by chromosome breakpoints at fraction lengths 0.59 and 0.75. The molecular markers tightly linked to Stb1 could be useful for marker-assisted selection and for pyramiding of Stb1 with other genes for resistance to M. graminicola in wheat.     

Multicolor FISH Mapping with Alu-PCR-Amplified YAC Clone DNA Determines the Order of Markers in the BRCA1 Region on Chromosome 17q12-q21

A gene designated BRCA1, implicated in the susceptibility to early-onset familial breast cancer, has recently been localized to chromosome 17q12-q21. To date, the order of DNA markers mapped within this region has been based on genetic linkage analysis. We report the use of multicolor fluorescence in situ hybridization to establish a physically based map of five polymorphic DNA markers and 10 cloned genes spanning this region. Three cosmid clones and Alu-PCR-generated products derived from 12 yeast artificial chromosome clones representing each of these markers were used in two-color mapping experiments to determine an initial proximity of markers relative to each other on metaphase chromosomes. Interphase mapping was then employed to determine the order and orientation of closely spaced loci by direct visualization of fluorescent signals following hybridization of three probes, each detected in a different color. Statistical analysis of the combined data suggests that the order of markers in the BRCA1 region is cen-THRA1-TOP2-GAS-OF2-17HSI)-248yg9-RNU2-OF3-PPY/p131-EPB3-Mfd188-WNT3-HOX2-GP3A-tel. This map is consistent with that determined by radiation-reduced hybrid mapping and will facilitate positional cloning strategies in efforts to isolate and characterize the BRCA1 gene.     

Improved carrier testing for multiple endocrine neoplasia,type 1, using new microsatellite-type DNA markers

Familial multiple endocrine neoplasia, type 1 (FMEN1), is an autosomal dominant trait generated by hyperfunction of various endocrine glands. The gene for MEN1 has been mapped to chromosome 11q13 by genetic linkage and deletion mapping in tumors. Eight Finnish families, including 46 individuals carrying the risk haplotype, have been typed for four polymorphic microsatellite DNA markers spanning the MEN1 chromosomal region. Three of the loci concerned, D11S913, D11S987, and D11S1337, displayed maximum lod scores (Z _max ) 6.70, 9.88, and 2.54, respectively, with no recombinations with the disease gene, whereas a Z _max of 8.43 was obtained for D11S971 at a recombination fraction of 0.03. Our results indicate that the use of this set of markers considerably improves the diagnostic value of genotyping patients at risk of developing MEN1.     

High-resolution genetic mapping at the <Emphasis Type="Italic">Bph15</Emphasis> locus for brown planthopper resistance in rice (<Emphasis Type="Italic">Oryza sativa</Emphasis> L.)

Resistance to the brown planthopper (BPH), Nilaparvata lugens Stål, a devastating sucking insect pest of rice, is an important breeding objective in rice improvement programs. Bph15, one of the 17 major BPH resistance genes so far identified in both cultivated and wild rice, has been identified in an introgression line, B5, and mapped on chromosome 4 flanked by restriction fragment length polymorphism markers C820 and S11182. In order to pave the way for positional cloning of this gene, we have developed a high-resolution genetic map of Bph15 by positioning 21 DNA markers in the target chromosomal region. Mapping was based on a PCR-based screening of 9,472 F₂ individuals derived from a cross between RI93, a selected recombinant inbred line of B5 bearing the resistance gene Bph15, and a susceptible variety, Taichung Native 1, in order to identify recombinant plants within the Bph15 region. Recombinant F₂ individuals with the Bph15 genotype were determined by phenotype evaluation. Analysis of recombination events in the Bph15 region delimited the gene locus to an interval between markers RG1 and RG2 that co-segregated with the M1 marker. A genomic library of B5 was screened using these markers, and bacterial artificial chromosome clones spanning the Bph15 chromosome region were obtained. An assay of the recombinants using the sub-clones of these clones in combination with sequence analysis delimited the Bph15 gene to a genomic segment of approximately 47 kb. This result should serve as the basis for eventual isolation of the Bph15 resistance gene.     

Genetic characterization of the polycotyledon locus in tomato

Developmental mutants serve as a useful material to unravel the mechanisms necessary for organ development. The polycotyledon (poc) mutant of tomato, with multiple cotyledons in the seedling and varied phenotypic effects in the adult plant is one such mutant. Studies using physiological and anatomical methods in our lab suggest that POC is involved in the negative regulation of polar auxin transport, which is likely the reason for the pleiotropic phenotype in the mutant. Because of the physiological significance of the polycotyledon mutant described in this paper and also being first of its kind in tomato and also other plant species, we are using a map-based cloning approach to map the polycotyledon gene. Molecular mapping of this locus using segregating interspecific F₂ mapping population localized polycotyledon gene close to TG424 marker on the long arm of chromosome 9. The closest marker mapped was a PCR marker identified in this study, E8A2 at a distance of 7.4 cM from the poc locus. The absence of tightly linked RAPD markers and the non-availability of more mapped markers in this region led us to initiate chromosome walk to polycotyledon gene. Both the flanking markers TG248 and E8A2 were used to screen the BAC library and a contig was developed for TG248 marker. The BAC-end sequences were analyzed for their use as RFLP markers to enrich this region for markers. Analysis of the BAC-end sequences revealed that poc is localized in the region surrounded by copia-like retrotransposon elements explaining the absence of markers in the euchromatin region on long arm of chromosome 9. Further studies identified two BAC-end sequences which mapped around the poc locus and also indicated very low physical versus genetic distance ratio in this region. The double mutant analyses of poc with the other two known polycotyledon mutants of tomato, pct and dem revealed allelism with pct; therefore, the poc mutant was named as pct1-2, and also the original pct mutant was renamed as pct1-1.     

Fine mapping of a quantitative trait locus <Emphasis Type="Italic">qHD3-1</Emphasis>, controlling the heading date,to a 29.5-kb DNA fragment in rice

In our previous studies, a single segment substitution line (SSSL) W23-03-8-9-1 with substituted interval of PSM301-PSM306-PSM305-PSM304-RM3894-RM3372-RM569-RM231-RM545 on chromosome 3 has been found to comprise a gene for extremely early heading date. To map this gene, the SSSL W23-03-8-9-1 was crossed with the recipient Huajingxian (HJX74) to develop an F2 segregating population. The distribution of early and late heading plants in this population fitted a segregation ratio of 3: 1, indicating that early heading was controlled by a dominant gene. Using a random sample of 520 individuals from the F2 segregation population, the qHD3-1 locus was mapped between two SSR markers, RM3894 and RM3372, with genetic distances of 1.2 and 1.1 cM, respectively. For fine mapping of qHD3-1, a large F_{2: 3} segregating population was developed, with 6000 individuals from the F₂ plants heterozygous in the RM3894 and RM3372 regions. The analysis of recombinants in the qHD3-1 region put the gene locus into an interval of 29.5 kb flanked by the left marker 3HD8 and the right marker 3HD9. Sequence analysis of this fragment predicted eight open reading frames. One of them, ORF8, with its molecular function predicted to encode ribonuclease III activity and RNA binding, is considered the most interesting candidate gene.     

High-resolution mapping of a new brown planthopper (BPH) resistance gene, Bph18(t), and marker-assisted selection for BPH resistance in rice (Oryza sativa L.)

Brown planthopper (BPH) is a destructive insect pest of rice in Asia. Identification and the incorporation of new BPH resistance genes into modern rice cultivars are important breeding strategies to control the damage caused by new biotypes of BPH. In this study, a major resistance gene, Bph18(t), has been identified in an introgression line (IR65482-7-216-1-2) that has inherited the gene from the wild species Oryza australiensis. Genetic analysis revealed the dominant nature of the Bph18(t) gene and identified it as non-allelic to another gene, Bph10 that was earlier introgressed from O. australiensis. After linkage analysis using MapMaker followed by single-locus ANOVA on quantitatively expressed resistance levels of the progenies from an F₂ mapping population identified with marker allele types, the Bph18(t) gene was initially located on the subterminal region of the long arm of chromosome 12 flanked by the SSR marker RM463 and the STS marker S15552. The corresponding physical region was identified in the Nipponbare genome pseudomolecule 3 through electronic chromosome landing (e-landing), in which 15 BAC clones covered 1.612 Mb. Eleven DNA markers tagging the BAC clones were used to construct a high-resolution genetic map of the target region. The Bph18(t) locus was further localized within a 0.843-Mb physical interval that includes three BAC clones between the markers R10289S and RM6869 by means of single-locus ANOVA of resistance levels of mapping population and marker-gene association analysis on 86 susceptible F₂ progenies based on six time-point phenotyping. Using gene annotation information of TIGR, a putative resistance gene was identified in the BAC clone OSJNBa0028L05 and the sequence information was used to generate STS marker 7312.T4A. The marker allele of 1,078 bp completely co-segregated with the BPH resistance phenotype. STS marker 7312.T4A was validated using BC₂F₂ progenies derived from two temperate japonica backgrounds. Some 97 resistant BC₂F₂ individuals out of 433 screened completely co-segregated with the resistance-specific marker allele (1,078 bp) in either homozygous or heterozygous state. This further confirmed a major gene-controlled resistance to the BPH biotype of Korea. Identification of Bph18(t) enlarges the BPH resistance gene pool to help develop improved rice cultivars, and the PCR marker (7312.T4A) for the Bph18(t) gene should be readily applicable for marker-assisted selection (MAS). K. K. Jena and J. U. Jeung contributed equally to this study.     

Refined genetic and comparative physical mapping of the canine copper toxicosis locus

Recently, the copper toxicosis (CT) locus in Bedlington terriers was assigned to canine chromosome region CFA10q26, which is homologous to human chromosome region HSA2p13-21. A comparative map between CFA10q21-26 and HSA2p13-21 was constructed by using genes already localized to HSA2p13-21. A high-resolution radiation map of CFA10q21-26 was constructed to facilitate positional cloning of the CT gene. For this map, seven Type I and eleven Type II markers were mapped. Using homozygosity mapping, the CT locus could be confined to a 42.3 cR₃₀₀₀ region, between the FH2523 and C10.602 markers. On the basis of a partial BAC contig, it was estimated that 1-cR₃₀₀₀ is equivalent to approximately 210 kb, implying that the CT candidate region is therefore estimated to be about 9 Mb. Received: 16 December 1999 / Accepted: 23 February 2000     

Genetic characterization of apospory in tetraploid Paspalum notatum based on the identification of linked molecular markers

Tetraploid Paspalum notatum (bahiagrass) is a valuable forage grass with aposporous apomictic reproduction. In a previous study, we showed that apospory in bahiagrass is under the control of a single dominant gene with a distorted segregation ratio. The objective of this work was to identify molecular markers linked to apospory in tetraploid P. notatum and establish a preliminary syntenic relationship with the genomic region associated with apospory in P. simplex. A F₁ population of 290 individuals, segregating for apospory, was generated after crossing a completely sexual plant (Q4188) with a natural aposporous apomictic plant (Q4117). The whole progeny was classified as sexual or aposporous by embryo sacs analysis. A bulked segregant analysis was carried out to identify molecular markers co-segregating with apospory. Four hundred RAPD primers, 30 AFLP primers combinations and 85 RFLP clones were screened using DNA from both parental genotypes and aposporous and sexual bulks. Linkage analysis was performed with cytological and genetic information from the complete progeny. Cytoembryological analysis showed 219 sexual and 71 aposporous F₁ individuals. Seven different molecular markers (2 RAPD, 4 AFLP and 1 RFLP) were found to be completely linked to apospory. The RFLP probe C1069, mapping to the telomeric region of the long arm of rice chromosome 12, was one of the molecular markers completely linked to apospory in P. notatum. This marker had been previously associated with apospory in P. simplex. A preliminary map of the chromosome region carrying the apospory locus was constructed.     

Identification and mapping of Pi41, a major gene conferring resistance to rice blast in the Oryza sativa subsp. indica reference cultivar, 93-11

The Oryza sativa subsp. indica reference cultivar (cv.), 93-11 is completely resistant to many Chinese isolates of the rice blast fungus. Resistance segregated in a 3:1 (resistance/susceptible) ratio in an F₂ population from the cross between 93-11 and the japonica reference cv. Nipponbare, when challenged with two independent blast isolates. The chromosomal location of this monogenic resistance was mapped to a region of the long arm of chromosome 12 by bulk segregant analysis, using 180 evenly distributed SSR markers. Five additional SSR loci and nine newly developed PCR-based markers allowed the target region to be reduced to ca. 1.8 cM, equivalent in Nipponbare to about 800 kb. In the reference sequence of Nipponbare, this region includes an NBS-LRR cluster of four genes. The known blast resistance gene Pi-GD-3 also maps in this region, but the 93-11 resistance was distinguishable from Pi-GD-3 on the basis of race specificity. We have therefore named the 93-11 resistance Pi41. Seven markers completely linked to Pi41 will facilitate both marker-assisted breeding and gene isolation cloning.     

Identification and characterization of a novel powdery mildew resistance gene <Emphasis Type="Italic">PmG3M</Emphasis> derived from wild emmer wheat, <Emphasis Type="Italic">Triticum dicoccoides</Emphasis>

Powdery mildew, caused by Blumeria graminis f. sp. tritici (Bgt) is one of the most important wheat diseases worldwide. Wild emmer wheat, Triticum turgidum ssp. dicoccoides, the tetraploid ancestor (AABB) of domesticated bread and durum wheat, harbors many important alleles for resistance to various diseases, including powdery mildew. In the current study, two tetraploid wheat mapping populations, derived from a cross between durum wheat (cv. Langdon) and wild emmer wheat (accession G-305-3M), were used to identify and map a novel powdery mildew resistance gene. Wild emmer accession G-305-3M was resistant to all 47 Bgt isolates tested, from Israel and Switzerland. Segregation ratios of F₂ progenies and F₆ recombinant inbred line (RIL) mapping populations, in their reactions to inoculation with Bgt, revealed a Mendelian pattern (3:1 and 1:1, respectively), indicating the role of a single dominant gene derived from T. dicoccoides accession G-305-3M. This gene, temporarily designated PmG3M, was mapped on chromosome 6BL and physically assigned to chromosome deletion bin 6BL-0.70-1.00. The F₂ mapping population was used to construct a genetic map of the PmG3M gene region consisted of six simple sequence repeats (SSR), 11 resistance gene analog (RGA), and two target region amplification polymorphism (TRAP) markers. A second map, constructed based on the F₆ RIL population, using a set of skeleton SSR markers, confirmed the order of loci and distances obtained for the F₂ population. The discovery and mapping of this novel powdery mildew resistance gene emphasize the importance of the wild emmer wheat gene pool as a source for crop improvement.