CRISPR系统用于昆虫基因表达调控的研究进展与展望

昆虫基因功能研究因缺少相应的工具而受到明显限制,但CRISPR/Cas9系统的出现为昆虫基因编辑及转录调控研究提供巨大助力。将Cas9核酸酶的RuvC和HNH剪切结构域失活改造得到的dCas9系统近年来在基因转录调控方面得到了广泛应用,同时CRISPR/dCpf1和最新发现的CRISPR/Cas13(a/b)系统为基因功能研究提供更多选择。本文综述了dCas9, dCpf1及Cas13(a/b)系统作用机理及在果蝇中的转录调控研究进展,以期为相关昆虫研究提供参考。     

Off‐target assessment of CRISPR‐Cas9 guiding RNAs in human iPS and mouse ES cells

The CRISPR‐Cas9 system consists of a site‐specific, targetable DNA nuclease that holds great potential in gene editing and genome‐wide screening applications. To apply the CRISPR‐Cas9 system to these assays successfully, the rate at which Cas9 induces DNA breaks at undesired loci must be understood. We characterized the rate of Cas9 off‐target activity in typical Cas9 experiments in two human and one mouse cell lines. We analyzed the Cas9 cutting activity of 12 gRNAs in both their targeted sites and ～90 predicted off‐target sites per gRNA. In a Cas9‐based knockout experiment, gRNAs induced detectable Cas9 cutting activity in all on‐target sites and in only a few off‐target sites genome‐wide in human 293FT, human‐induced pluripotent stem (hiPS) cells, and mouse embryonic stem (ES) cells. Both the cutting rates and DNA repair patterns were highly correlated between the two human cell lines in both on‐target and off‐target sites. In clonal Cas9 cutting analysis in mouse ES cells, biallelic Cas9 cutting was observed with low off‐target activity. Our results show that off‐target activity of Cas9 is low and predictable by the degree of sequence identity between the gRNA and a potential off‐target site. Off‐target Cas9 activity can be minimized by selecting gRNAs with few off‐target sites of near complementarity. genesis 53:225–236, 2015. © 2014 The Authors. Genesis Published by Wiley Periodicals, Inc.     

Live‐cell CRISPR imaging in plants reveals dynamic telomere movements

Elucidating the spatiotemporal organization of the genome inside the nucleus is imperative to our understanding of the regulation of genes and non‐coding sequences during development and environmental changes. Emerging techniques of chromatin imaging promise to bridge the long‐standing gap between sequencing studies, which reveal genomic information, and imaging studies that provide spatial and temporal information of defined genomic regions. Here, we demonstrate such an imaging technique based on two orthologues of the bacterial clustered regularly interspaced short palindromic repeats (CRISPR)–CRISPR associated protein 9 (Cas9). By fusing eGFP/mRuby2 to catalytically inactive versions of Streptococcus pyogenes and Staphylococcus aureus Cas9, we show robust visualization of telomere repeats in live leaf cells of Nicotiana benthamiana. By tracking the dynamics of telomeres visualized by CRISPR–dCas9, we reveal dynamic telomere movements of up to 2 μm over 30 min during interphase. Furthermore, we show that CRISPR–dCas9 can be combined with fluorescence‐labelled proteins to visualize DNA–protein interactions in vivo. By simultaneously using two dCas9 orthologues, we pave the way for the imaging of multiple genomic loci in live plants cells. CRISPR imaging bears the potential to significantly improve our understanding of the dynamics of chromosomes in live plant cells.     

Activities and specificities of CRISPR/Cas9 and Cas12a nucleases for targeted mutagenesis in maize

CRISPR/Cas9 and Cas12a (Cpf1) nucleases are two of the most powerful genome editing tools in plants. In this work, we compared their activities by targeting maize glossy2 gene coding region that has overlapping sequences recognized by both nucleases. We introduced constructs carrying SpCas9‐guide RNA (gRNA) and LbCas12a‐CRISPR RNA (crRNA) into maize inbred B104 embryos using Agrobacterium‐mediated transformation. On‐target mutation analysis showed that 90%–100% of the Cas9‐edited T0 plants carried indel mutations and 63%–77% of them were homozygous or biallelic mutants. In contrast, 0%–60% of Cas12a‐edited T0 plants had on‐target mutations. We then conducted CIRCLE‐seq analysis to identify genome‐wide potential off‐target sites for Cas9. A total of 18 and 67 potential off‐targets were identified for the two gRNAs, respectively, with an average of five mismatches compared to the target sites. Sequencing analysis of a selected subset of the off‐target sites revealed no detectable level of mutations in the T1 plants, which constitutively express Cas9 nuclease and gRNAs. In conclusion, our results suggest that the CRISPR/Cas9 system used in this study is highly efficient and specific for genome editing in maize, while CRISPR/Cas12a needs further optimization for improved editing efficiency.     

A sequential transformation method for validating soybean genome editing by CRISPR/Cas9 system

This study was performed to evaluate the sequential transformation for soybean genome editing using the CRISPR/Cas9 system as well as to show a strategy for examining the activity of CRISPR/Cas9 constructs, especially the designed guide RNAs (gRNAs). The gRNAs for targeted mutations of an exogenous gene and multiple endogenous genes were constructed and transferred into a stably-overexpressed-Cas9 soybean line using Agrobacterium rhizogenes-mediated hairy root induction system. The targeted mutations were identified and characterized by the poly-acrylamide gel electrophoresis (PAGE) heteroduplex method and by sequencing. Induced mutations of the exogenous gene (gus) were observed in 57% of tested transgenic hairy roots, while 100% of the transgenic root lines showed targeted mutations of the endogenous (SACPD-C) gene. Multiple gRNAs targeting two endogenous genes (SACPD-C and SMT) induced mutation rates of 75% and 67%, respectively. Various indels including small and large deletions as well as insertions were found in target sites of the tested genes. This sequential transformation method could present the targeting efficacy of different gRNAs of each tested gene. Additionally, in this study differences in gRNA ratings were found between bioinformatics predictions and actual experimental results. This is the first successful application of the sequential transformation method for genome editing in soybean using the hairy root system. This method could be potentially useful for validating CRISPR/Cas9 constructs, evaluating gRNA targeting efficiencies, and could be applied for other research directions.     

CRISPR/dCas9‐mediated activation of multiple endogenous target genes directly converts human foreskin fibroblasts into Leydig‐like cells

Recently, Leydig cell (LC) transplantation has been revealed as a promising strategy for treating male hypogonadism; however, the key problem restricting the application of LC transplantation is a severe lack of seed cells. It seems that targeted activation of endogenous genes may provide a potential alternative. Therefore, the aim of this study was to determine whether targeted activation of Nr5a1, Gata4 and Dmrt1 (NGD) via the CRISPR/dCas9 synergistic activation mediator system could convert human foreskin fibroblasts (HFFs) into functional Leydig‐like cells. We first constructed the stable Hsd3b‐dCas9‐MPH‐HFF cell line using the Hsd3b‐EGFP, dCas9‐VP64 and MS2‐P65‐HSF1 lentiviral vectors and then infected it with single guide RNAs. Next, we evaluated the reprogrammed cells for their reprogramming efficiency, testosterone production characteristics and expression levels of Leydig steroidogenic markers by quantitative real‐time polymerase chain reaction or Western blotting. Our results showed that the reprogramming efficiency was close to 10% and that the reprogrammed Leydig‐like cells secreted testosterone rapidly and, more importantly, responded effectively to stimulation with human chorionic gonadotropin and expressed Leydig steroidogenic markers. Our findings demonstrate that simultaneous targeted activation of the endogenous NGD genes directly reprograms HFFs into functional Leydig‐like cells, providing an innovative technology that may have promising potential for the treatment of male androgen deficiency diseases.     

An Agrobacterium‐delivered CRISPR/Cas9 system for high‐frequency targeted mutagenesis in maize

CRISPR/Cas9 is a powerful genome editing tool in many organisms, including a number of monocots and dicots. Although the design and application of CRISPR/Cas9 is simpler compared to other nuclease‐based genome editing tools, optimization requires the consideration of the DNA delivery and tissue regeneration methods for a particular species to achieve accuracy and efficiency. Here, we describe a public sector system, ISU Maize CRISPR, utilizing Agrobacterium‐delivered CRISPR/Cas9 for high‐frequency targeted mutagenesis in maize. This system consists of an Escherichia coli cloning vector and an Agrobacterium binary vector. It can be used to clone up to four guide RNAs for single or multiplex gene targeting. We evaluated this system for its mutagenesis frequency and heritability using four maize genes in two duplicated pairs: Argonaute 18 (ZmAgo18a and ZmAgo18b) and dihydroflavonol 4‐reductase or anthocyaninless genes (a1 and a4). T₀ transgenic events carrying mono‐ or diallelic mutations of one locus and various combinations of allelic mutations of two loci occurred at rates over 70% mutants per transgenic events in both Hi‐II and B104 genotypes. Through genetic segregation, null segregants carrying only the desired mutant alleles without the CRISPR transgene could be generated in T₁ progeny. Inheritance of an active CRISPR/Cas9 transgene leads to additional target‐specific mutations in subsequent generations. Duplex infection of immature embryos by mixing two individual Agrobacterium strains harbouring different Cas9/gRNA modules can be performed for improved cost efficiency. Together, the findings demonstrate that the ISU Maize CRISPR platform is an effective and robust tool to targeted mutagenesis in maize.     

Creation of zebrafish knock‐in reporter lines in the nefma gene by Cas9‐mediated homologous recombination

CRISPR/Cas9‐based strategies are widely used for genome editing in many organisms, including zebrafish. Although most applications consist in introducing double strand break (DSB)‐induced mutations, it is also possible to use CRISPR/Cas9 to enhance homology directed repair (HDR) at a chosen genomic location to create knock‐ins with optimally controlled precision. Here, we describe the use of CRISPR/Cas9‐targeted DSB followed by HDR to generate zebrafish transgenic lines where exogenous coding sequences are added in the nefma gene, in frame with the endogenous coding sequence. The resulting knock‐in embryos express the added gene (fluorescent reporter or KalTA4 transactivator) specifically in the populations of neurons that express nefma, making them convenient tools for research on these populations.     

Use of two gRNAs for CRISPR/Cas9 improves bi‐allelic homologous recombination efficiency in mouse embryonic stem cells

Targeted genome editing in mouse embryonic stem cells (ESCs) is a powerful resource to functionally characterize genes and regulatory elements. The use of the CRISPR/Cas9 genome editing approach has remarkably improved the time and efficiency of targeted recombination. However, the efficiency of this protocol is still far from ideal when aiming for bi‐allelic homologous recombination, requiring at least two independent targeting recombination events. Here we describe an improved protocol that uses two gRNAs flanking the selected targeted region, leading to highly efficient homologous recombination in mouse ESCs. The bi‐allelic recombination targeting efficiency is over 90% when using two gRNAs together with the inhibition of non‐homologous end‐joint repair. Moreover, this technique is compatible with the generation of knocked‐in mice and the use of ESC‐derived differentiation protocols, therefore facilitating and accelerating the gene targeting in mice and ESCs.     

EasyClone‐MarkerFree: A vector toolkit for marker‐less integration of genes into Saccharomyces cerevisiae via CRISPR‐Cas9

Saccharomyces cerevisiae is an established industrial host for production of recombinant proteins, fuels and chemicals. To enable stable integration of multiple marker‐free overexpression cassettes in the genome of S. cerevisiae, we have developed a vector toolkit EasyClone‐MarkerFree. The integration of linearized expression cassettes into defined genomic loci is facilitated by CRISPR/Cas9. Cas9 is recruited to the chromosomal location by specific guide RNAs (gRNAs) expressed from a set of gRNA helper vectors. Using our genome engineering vector suite, single and triple insertions are obtained with 90–100% and 60–70% targeting efficiency, respectively. We demonstrate application of the vector toolkit by constructing a haploid laboratory strain (CEN.PK113‐7D) and a diploid industrial strain (Ethanol Red) for production of 3‐hydroxypropionic acid, where we tested three different acetyl‐CoA supply strategies, requiring overexpression of three to six genes each. Among the tested strategies was a bacterial cytosolic pyruvate dehydrogenase complex, which was integrated into the genome in a single transformation. The publicly available EasyClone‐MarkerFree vector suite allows for facile and highly standardized genome engineering, and should be of particular interest to researchers working on yeast chassis with limited markers available.