The key feature for early migratory processes

Migration of cells is one of the most essential prerequisites to form higher organisms and depends on a strongly coordinated sequence of processes. Early migratory events include substrate sensing, adhesion formation, actin bundle assembly and force generation. While substrate sensing was ascribed to filopodia, all other processes were believed to depend mainly on lamellipodia of migrating cells. In this work we show for motile keratinocytes that all processes from substrate sensing to force generation strongly depend on filopodial focal complexes as well as on filopodial actin bundles. In a coordinated step by step process filopodial focal complexes have to be tightly adhered to the substrate and to filopodial actin bundles to enlarge upon lamellipodial contact forming classical focal adhesions. Lamellipodial actin filaments attached to those focal adhesions originate from filopodia. Upon cell progression, the incorporation of filopodial actin bundles into the lamellipodium goes along with a complete change in actin cross-linker composition from filopodial fascin to lamellipodial α-actinin. α-Actinin in turn is replaced by myosin II and becomes incorporated directly behind the leading edge. Myosin II activity makes this class of actin bundles with their attached FAs the major source of force generation and transmission at the cell front. Furthermore, connection of FAs to force generating actin bundles leads to their stabilization and further enlargement. Consequently, adhesion sites formed independently of filopodia are not connected to detectable actin bundles, transmit weak forces to the substrate and disassemble within a few minutes without having been increased in size.     

The key feature for early migratory processes: Dependence of adhesion,actin bundles,force generation and transmission on filopodia

Migration of cells is one of the most essential prerequisites to form higher organisms and depends on a strongly coordinated sequence of processes. Early migratory events include substrate sensing, adhesion formation, actin bundle assembly and force generation. While substrate sensing was ascribed to filopodia, all other processes were believed to depend mainly on lamellipodia of migrating cells. In this work we show for motile keratinocytes that all processes from substrate sensing to force generation strongly depend on filopodial focal complexes as well as on filopodial actin bundles. In a coordinated step by step process, filopodial focal complexes have to be tightly adhered to the substrate and to filopodial actin bundles to enlarge upon lamellipodial contact forming classical focal adhesions. Lamellipodial actin filaments attached to those focal adhesions originate from filopodia. Upon cell progression, the incorporation of filopodial actin bundles into the lamellipodium goes along with a complete change in actin cross-linker composition from filopodial fascin to lamellipodial α-actinin. α-Actinin in turn is replaced by myosin II and becomes incorporated directly behind the leading edge. Myosin II activity makes this class of actin bundles with their attached FAs the major source of force generation and transmission at the cell front. Furthermore, connection of FAs to force generating actin bundles leads to their stabilization and further enlargement. Consequently, adhesion sites formed independently of filopodia are not connected to detectable actin bundles, transmit weak forces to the substrate and disassemble within a few minutes without having been increased in size.Key words: filopodia, focal complexes, cell migration, focal adhesion, myosin II, force, actin flow, maturation     

One step ahead: Role of filopodia in adhesion formation during cell migration of keratinocytes

Cell adhesion is an essential prerequisite for cell function and movement. It depends strongly on focal adhesion complexes connecting the extracellular matrix to the actin cytoskeleton. Especially in moving cells focal adhesions are highly dynamic and believed to be formed closely behind the leading edge. Filopodia were thought to act mainly as guiding cues using their tip complexes for elongation. Here we show for keratinocytes a strong dependence of lamellipodial adhesion sites on filopodia. Upon stable contact of the VASP-containing tip spot to the substrate, a filopodial focal complex (filopodial FX) is formed right behind along the filopodia axis. These filopodial FXs are fully assembled, yet small adhesions containing all adhesion markers tested. Filopodial FXs when reached by the lamellipodium are just increased in size resulting in classical focal adhesions. At the same time most filopodia regain their elongation ability. Blocking filopodia inhibits development of new focal adhesions in the lamellipodium, while focal adhesion maturation in terms of vinculin exchange dynamics remains active. Our data therefore argue for a strong spatial and temporal dependence of focal adhesions on filopodial focal complexes in keratinocytes with filopodia not permanently initiated via new clustering of actin filaments to induce elongation.     

Zyxin is not colocalized with vasodilator-stimulated phosphoprotein (VASP) at lamellipodial tips and exhibits different dynamics to vinculin, paxillin, and VASP in focal adhesions

Actin polymerization is accompanied by the formation of protein complexes that link extracellular signals to sites of actin assembly such as membrane ruffles and focal adhesions. One candidate recently implicated in these processes is the LIM domain protein zyxin, which can bind both Ena/vasodilator-stimulated phosphoprotein (VASP) proteins and the actin filament cross-linking protein alpha-actinin. To characterize the localization and dynamics of zyxin in detail, we generated both monoclonal antibodies and a green fluorescent protein (GFP)-fusion construct. The antibodies colocalized with ectopically expressed GFP-VASP at focal adhesions and along stress fibers, but failed to label lamellipodial and filopodial tips, which also recruit Ena/VASP proteins. Likewise, neither microinjected, fluorescently labeled zyxin antibodies nor ectopically expressed GFP-zyxin were recruited to these latter sites in live cells, whereas both probes incorporated into focal adhesions and stress fibers. Comparing the dynamics of zyxin with that of the focal adhesion protein vinculin revealed that both proteins incorporated simultaneously into newly formed adhesions. However, during spontaneous or induced focal adhesion disassembly, zyxin delocalization preceded that of either vinculin or paxillin. Together, these data identify zyxin as an early target for signals leading to adhesion disassembly, but exclude its role in recruiting Ena/VASP proteins to the tips of lamellipodia and filopodia.     

The assembly and function of perinuclear actin cap in migrating cells

Stress fibers are actin bundles encompassing actin filaments, actin-crosslinking, and actin-associated proteins that represent the major contractile system in the cell. Different types of stress fibers assemble in adherent cells, and they are central to diverse cellular processes including establishment of the cell shape, morphogenesis, cell polarization, and migration. Stress fibers display specific cellular organization and localization, with ventral fibers present at the basal side, and dorsal fibers and transverse actin arcs rising at the cell front from the ventral to the dorsal side and toward the nucleus. Perinuclear actin cap fibers are a specific subtype of stress fibers that rise from the leading edge above the nucleus and terminate at the cell rear forming a dome-like structure. Perinuclear actin cap fibers are fixed at three points: both ends are anchored in focal adhesions, while the central part is physically attached to the nucleus and nuclear lamina through the linker of nucleoskeleton and cytoskeleton (LINC) complex. Here, we discuss recent work that provides new insights into the mechanism of assembly and the function of these actin stress fibers that directly link extracellular matrix and focal adhesions with the nuclear envelope.     

Non-muscle myosin II regulates aortic stiffness through effects on specific focal adhesion proteins and the non-muscle cortical cytoskeleton

Non-muscle myosin II (NMII) plays a role in many fundamental cellular processes including cell adhesion, migration, and cytokinesis. However, its role in mammalian vascular function is not well understood. Here, we investigated the function of NMII in the biomechanical and signalling properties of mouse aorta. We found that blebbistatin, an inhibitor of NMII, decreases agonist-induced aortic stress and stiffness in a dose-dependent manner. We also specifically demonstrate that in freshly isolated, contractile, aortic smooth muscle cells, the non-muscle myosin IIA (NMIIA) isoform is associated with contractile filaments in the core of the cell as well as those in the non-muscle cell cortex. However, the non-muscle myosin IIB (NMIIB) isoform is excluded from the cell cortex and colocalizes only with contractile filaments. Furthermore, both siRNA knockdown of NMIIA and NMIIB isoforms in the differentiated A7r5 smooth muscle cell line and blebbistatin-mediated inhibition of NM myosin II suppress agonist-activated increases in phosphorylation of the focal adhesion proteins FAK Y925 and paxillin Y118. Thus, we show in the present study, for the first time that NMII regulates aortic stiffness and stress and that this regulation is mediated through the tension-dependent phosphorylation of the focal adhesion proteins FAK and paxillin.     

Focal adhesion assembly

The GTP-binding protein Rho regulates the assembly of focal adhesions and their associated bundles of actin filaments. Two different lines of research have converged to reveal how Rho might regulate assembly of these structures. One approach has been the identification of downstream effectors of Rho, whereas the other has been the exploration of the role of contractility in promoting assembly. It is now apparent that Rho is a key regulator of actomyosin-based contractility in nonmuscle cells and that contractility, combined with adhesion to a rigid substrate, leads to the formation of both stress fibres and focal adhesions.     

Stress fibers are generated by two distinct actin assembly mechanisms in motile cells

Stress fibers play a central role in adhesion, motility, and morphogenesis of eukaryotic cells, but the mechanism of how these and other contractile actomyosin structures are generated is not known. By analyzing stress fiber assembly pathways using live cell microscopy, we revealed that these structures are generated by two distinct mechanisms. Dorsal stress fibers, which are connected to the substrate via a focal adhesion at one end, are assembled through formin (mDia1/DRF1)-driven actin polymerization at focal adhesions. In contrast, transverse arcs, which are not directly anchored to substrate, are generated by endwise annealing of myosin bundles and Arp2/3-nucleated actin bundles at the lamella. Remarkably, dorsal stress fibers and transverse arcs can be converted to ventral stress fibers anchored to focal adhesions at both ends. Fluorescence recovery after photobleaching analysis revealed that actin filament cross-linking in stress fibers is highly dynamic, suggesting that the rapid association-dissociation kinetics of cross-linkers may be essential for the formation and contractility of stress fibers. Based on these data, we propose a general model for assembly and maintenance of contractile actin structures in cells.     

Role of Actin Polymerization and Adhesion to Extracellular Matrix in Rac- and Rho-induced Cytoskeletal Reorganization

Most animal cells use a combination of actin-myosin–based contraction and actin polymerization– based protrusion to control their shape and motility. The small GTPase Rho triggers the formation of contractile stress fibers and focal adhesion complexes (Ridley, A.J., and A. Hall. 1992. Cell. 70:389–399) while a close relative, Rac, induces lamellipodial protrusions and focal complexes in the lamellipodium (Nobes, C.D., and A. Hall. 1995. Cell. 81:53–62; Ridley, A.J., H.F. Paterson, C.L. Johnston, D. Diekmann, and A. Hall. 1992. Cell. 70:401–410); the Rho family of small GTPases may thus play an important role in regulating cell movement. Here we explore the roles of actin polymerization and extracellular matrix in Rho- and Rac-stimulated cytoskeletal changes. To examine the underlying mechanisms through which these GTPases control F-actin assembly, fluorescently labeled monomeric actin, Cy3-actin, was introduced into serum-starved Swiss 3T3 fibroblasts. Incorporation of Cy3- actin into lamellipodial protrusions is concomitant with F-actin assembly after activation of Rac, but Cy3-actin is not incorporated into stress fibers formed immediately after Rho activation. We conclude that Rac induces rapid actin polymerization in ruffles near the plasma membrane, whereas Rho induces stress fiber assembly primarily by the bundling of actin filaments. Activation of Rho or Rac also leads to the formation of integrin adhesion complexes. Integrin clustering is not required for the Rho-induced assembly of actin-myosin filament bundles, or for vinculin association with actin bundles, but is required for stress fiber formation. Integrin-dependent focal complex assembly is not required for the Rac-induced formation of lamellipodia or membrane ruffles. It appears, therefore, that the assembly of large integrin complexes is not required for most of the actin reorganization or cell morphology changes induced by Rac or Rho activation in Swiss 3T3 fibroblasts.     

Normal and transformed fibroblast spreading: Role of microfilament polymerization and actin-myosin contractility

The polymerization of microfilaments and their subsequent rearrangements under the control of actin-myosin interactions are two major processes that underlie the morphogenetic reactions of cells. We studied their role in the spreading of normal and transformed REF52tetRas fibroblasts with adjustable ras-oncogene expression. Treatment with inhibitors of cell contractility (Y27632 or blebbistatin) led to the disappearance of actin bundles and focal adhesions; however, pseudopodial activity in both normal and transformed cells remained high. Under these conditions, spreading was more accelerated in normal cells then in ras-transformed cells. In normal cells treated with low concentrations of latrunculin A actin polymerization was suppressed, stress fibers and focal adhesions were preserved, but lamellipodial activity was lost and spreading was dramatically inhibited. In transformed fibroblasts treated with low doses of latrunculin, actin bundles and focal adhesions almost disappeared, but pseudopodial activity was apparent and spreading was less suppressed. Therefore, the most significant process in the regulation of cell spreading and polarization is the microfilament polymerization at the leading edge. ras-Transformed cells are less sensitive to inhibitors that affecting the cytoskeletal structure than nontransformed cells. Possible mechanisms that underlie the difference are discussed.     

Reconstitution in vitro of MSP-based filopodium extension in nematode sperm

The major sperm protein (MSP) motility system in nematode sperm is best known for propelling the movement of mature sperm, where it has taken over the role usually played by actin in amoeboid cell motility. However, MSP filaments also drive the extension of filopodia, transient organelles composed of a core bundle of MSP filaments, that form in the late in sperm development but are not found on crawling cells. We have reconstituted filopodial extension in vitro whereby thin bundles of MSP filaments, each enveloped by a membrane sheath at their growing end, elongated at rates up to 17 microm/min. These bundles often exceeded 500 microm in length but were comprised of filaments only 1 microm long. The reconstituted filopodia assembled in the same cell-free sperm extracts that produced MSP fibers, robust meshworks of filaments that exhibit the same organization and dynamics as the lamellipodial filament system that propels sperm movement. The filopodia and fibers that assembled in vitro both had a membranous structure at their growing end, shared four MSP accessory proteins, and responded identically to agents that alter MSP-based motility by modulating protein phosphorylation. However, filopodia grew three- to four-fold faster than fibers. The reconstitution of filopodial extension shows that, like the actin cytoskeleton, MSP filaments can adopt two architectures, bundles and meshworks, each capable of pushing against membranes to generate protrusion. The reconstitution of both forms of motility in the same in vitro system provides a promising avenue for understanding how the forces for membrane protrusion are produced.     

Assembly and mechanosensory function of focal adhesions: experiments and models

Initial integrin-mediated cell-matrix adhesions (focal complexes) appear underneath the lamellipodia, in the regions of the "fast" centripetal flow driven by actin polymerization. Once formed, these adhesions convert the flow behind them into a "slow", myosin II-driven mode. Some focal complexes then turn into elongated focal adhesions (FAs) associated with contractile actomyosin bundles (stress fibers). Myosin II inhibition does not suppress formation of focal complexes but blocks their conversion into mature FAs and further FA growth. Application of external pulling force promotes FA growth even under conditions when myosin II activity is blocked. Thus, individual FAs behave as mechanosensors responding to the application of force by directional assembly. We proposed a thermodynamic model for the mechanosensitivity of FAs, taking into account that an elastic molecular aggregate subject to pulling forces tends to grow in the direction of force application by incorporating additional subunits. This simple model can explain a variety of processes typical of FA behavior. Assembly of FAs is triggered by the small G-protein Rho via activation of two major targets, Rho-associated kinase (ROCK) and the formin homology protein, Dia1. ROCK controls creation of myosin II-driven forces, while Dia1 is involved in the response of FAs to these forces. Expression of the active form of Dia1, allows the external force-induced assembly of mature FAs, even in conditions when Rho is inhibited. Conversely, downregulation of Dia1 by siRNA prevents FA maturation even if Rho is activated. Dia1 and other formins cap barbed (fast growing) ends of actin filaments, allowing insertion of the new actin monomers. We suggested a novel mechanism of such "leaky" capping based on an assumption of elasticity of the formin/barbed end complex. Our model predicts that formin-mediated actin polymerization should be greatly enhanced by application of external pulling force. Thus, the formin-actin complex might represent an elementary mechanosensing device responding to force by enhancement of actin assembly. In addition to its role in actin polymerization, Dia1 seems to be involved in formation of links between actin filaments and microtubules affecting microtubule dynamics. Alpha-tubulin deacetylase HDAC6 cooperates with Dia1 in formation of such links. Since microtubules are known to promote FA disassembly, the Dia1-mediated effect on microtubule dynamics may possibly play a role in the negative feedback loop controlling size and turnover of FAs.     

Filopodial initiation and a novel filament-organizing center, the focal ring

This study examines filopodial initiation and implicates a putative actin filament organizer, the focal ring. Filopodia were optically recorded as they emerged from veils, the active lamellar extensions of growth cones. Motile histories revealed three events that consistently preceded filopodial emergence: an influx of cytoplasm into adjacent filopodia, a focal increase in phase density at veil margins, and protrusion of nubs that transform into filopodia. The cytoplasmic influx probably supplies materials needed for initiation. In correlated time lapse-immunocytochemistry, these focal phase densities corresponded to adhesions. These adhesions persisted at filopodial bases, regardless of subsequent movements. In correlated time lapse-electron microscopy, these adhesion sites contained a focal ring (an oblate, donut-shaped structure approximately 120 nm in diameter) with radiating actin filaments. Filament geometry may explain filopodial emergence at 30 degree angles relative to adjacent filopodia. A model is proposed in which focal rings play a vital role in initiating and stabilizing filopodia: 1) they anchor actin filaments at adhesions, thereby facilitating tension development and filopodial emergence; 2) "axial" filaments connect focal rings to nub tips, thereby organizing filament bundling and ensuring the bundle intersects an adhesion; and 3) "lateral" filaments interconnect focal rings and filament bundles, thereby helping stabilize lamellar margins and filopodia.     

Mechanisms of actin rearrangements mediating platelet activation.

The detergent-insoluble cytoskeleton of the resting human blood platelet contains approximately 2,000 actin filaments approximately 1 micron in length crosslinked at high angles by actin-binding protein and which bind to a spectrin-rich submembrane lamina (Fox, J., J. Boyles, M. Berndt, P. Steffen, and L. Anderson. 1988. J. Cell Biol. 106:1525-1538; Hartwig, J., and M. DeSisto. 1991. J. Cell Biol. 112:407-425). Activation of the platelets by contact with glass results within 30 s in a doubling of the polymerized actin content of the cytoskeleton and the appearance of two distinct new actin structures: bundles of long filaments within filopodia that end at the filopodial tips (filopodial bundles) and a circumferential zone of orthogonally arrayed short filaments within lamellipodia (lamellipodial network). Neither of these structures appears in cells exposed to glass with cytochalasin B present; instead the cytoskeletons have numerous 0.1-0.3-microns-long actin filament fragments attached to the membrane lamina. With the same time course as the glass-induced morphological changes, cytochalasin-sensitive actin nucleating activity, initially low in cytoskeletons of resting platelets, increases 10-fold in cytoskeletons of thrombin-activated platelets. This activity decays with a time course consistent with depolymerization of 0.1-0.3-microns-long actin filaments, and phalloidin inhibits this decay. Cytochalasin-insensitive and calcium-dependent nucleation activity also increases markedly in platelet extracts after thrombin activation of the cells. Prevention of the rise in cytosolic Ca2+ normally associated with platelet activation with the permeant Ca2+ chelator, Quin-2, inhibits formation of lamellipodial networks but not filopodial bundles after glass contact and reduces the cytochalasin B-sensitive nucleation activity by 60% after thrombin treatment. The filopodial bundles, however, are abnormal in that they do not end at the filopodial tips but form loops and return to the cell body. Addition of calcium to chelated cells restores lamellipodial networks, and calcium plus A23187 results in cytoskeletons with highly fragmented actin filaments within seconds. Immunogold labeling with antibodies against gelsolin reveals gelsolin molecules at the ends of filaments attached to the submembrane lamina of resting cytoskeletons and at the ends of some filaments in the lamellipodial networks and filopodial bundles of activated cytoskeletons. Addition of monomeric actin to myosin subfragment 1-labeled activated cytoskeletons leads to new (undecorated) filament growth off the ends of filaments in the filopodial bundles and the lamellipodial network. The simplest explanation for these findings is that gelsolin caps the barbed ends of the filaments in the resting platelet. Uncapping some of these filaments after activation leads to filopodial bundles.(ABSTRACT TRUNCATED AT 400 WORDS)     

Discrete mechanical model of lamellipodial actin network implements molecular clutch mechanism and generates arcs and microspikes

Mechanical forces, actin filament turnover, and adhesion to the extracellular environment regulate lamellipodial protrusions. Computational and mathematical models at the continuum level have been used to investigate the molecular clutch mechanism, calculating the stress profile through the lamellipodium and around focal adhesions. However, the forces and deformations of individual actin filaments have not been considered while interactions between actin networks and actin bundles is not easily accounted with such methods. We develop a filament-level model of a lamellipodial actin network undergoing retrograde flow using 3D Brownian dynamics. Retrograde flow is promoted in simulations by pushing forces from the leading edge (due to actin polymerization), pulling forces (due to molecular motors), and opposed by viscous drag in cytoplasm and focal adhesions. Simulated networks have densities similar to measurements in prior electron micrographs. Connectivity between individual actin segments is maintained by permanent and dynamic crosslinkers. Remodeling of the network occurs via the addition of single actin filaments near the leading edge and via filament bond severing. We investigated how several parameters affect the stress distribution, network deformation and retrograde flow speed. The model captures the decrease in retrograde flow upon increase of focal adhesion strength. The stress profile changes from compression to extension across the leading edge, with regions of filament bending around focal adhesions. The model reproduces the observed reduction in retrograde flow speed upon exposure to cytochalasin D, which halts actin polymerization. Changes in crosslinker concentration and dynamics, as well as in the orientation pattern of newly added filaments demonstrate the model’s ability to generate bundles of filaments perpendicular (actin arcs) or parallel (microspikes) to the protruding direction.     

Calpain mediates integrin-induced signaling at a point upstream of Rho family members.

Integrin-induced adhesion leads to cytoskeletal reorganizations, cell migration, spreading, proliferation, and differentiation. The details of the signaling events that induce these changes in cell behavior are not well understood but they appear to involve activation of Rho family members which activate signaling molecules such as tyrosine kinases, serine/threonine kinases, and lipid kinases. The result is the formation of focal complexes, focal adhesions, and bundles and networks of actin filaments that allow the cell to spread. The present study shows that mu-calpain is active in adherent cells, that it cleaves proteins known to be present in focal complexes and focal adhesions, and that overexpression of mu-calpain increased the cleavage of these proteins, induced an overspread morphology and induced an increased number of stress fibers and focal adhesions. Inhibition of calpain with membrane permeable inhibitors or by expression of a dominant negative form of mu-calpain resulted in an inability of cells to spread or to form focal adhesions, actin filament networks, or stress fibers. Cells expressing constitutively active Rac1 could still form focal complexes and actin filament networks (but not focal adhesions or stress fibers) in the presence of calpain inhibitors; cells expressing constitutively active RhoA could form focal adhesions and stress fibers. Taken together, these data indicate that calpain plays an important role in regulating the formation of focal adhesions and Rac- and Rho-induced cytoskeletal reorganizations and that it does so by acting at sites upstream of both Rac1 and RhoA.     

Contribution of the LIM Domain and Nebulin-Repeats to the Interaction of Lasp-2 with Actin Filaments and Focal Adhesions

Lasp-2 binds to actin filaments and concentrates in the actin bundles of filopodia and lamellipodia in neural cells and focal adhesions in fibroblastic cells. Lasp-2 has three structural regions: a LIM domain, a nebulin-repeat region, and an SH3 domain; however, the region(s) responsible for its interactions with actin filaments and focal adhesions are still unclear. In this study, we revealed that the N-terminal fragment from the LIM domain to the first nebulin-repeat module (LIM-n1) retained actin-binding activity and showed a similar subcellular localization to full-length lasp-2 in neural cells. The LIM domain fragment did not interact with actin filaments or localize to actin filament bundles. In contrast, LIM-n1 showed a clear subcellular localization to filopodial actin bundles. Although truncation of the LIM domain caused the loss of F-actin binding activity and the accumulation of filopodial actin bundles, these truncated fragments localized to focal adhesions. These results suggest that lasp-2 interactions with actin filaments are mediated through the cooperation of the LIM domain and the first nebulin-repeat module in vitro and in vivo. Actin filament binding activity may be a major contributor to the subcellular localization of lasp-2 to filopodia but is not crucial for lasp-2 recruitment to focal adhesions.     

Regulation of polarity in cells devoid of actin bundle system after treatment with inhibitors of myosin II activity

Interplay of two cytoskeletal systems--microfilaments and microtubules is essential for directional cell movement. To better understand the role of those cytoskeletal systems in polarization of cells, rat fibroblasts were incubated with drugs inhibiting activity of myosin II: blebbistatin and Y-27632. Both drugs led to disappearance of actin-myosin bundles and mature focal cell-matrix adhesions but did not affect polarization and directional motility. The rate of motility even increased after inhibitor treatment. The characteristic feature of inhibitor-treated fibroblasts was collapse of the cytoplasm accompanied by bundling of microtubules that led to transformation of lamellae into long immobile tails. The only exception was the leading anterior lamella which was not transformed into the tail and supported directional movement of the cell. The tail at the cell rear determined the position of anterior lamella and direction of locomotion. Depolymerization of microtubules by colcemid stopped directional locomotion of inhibitor-treated cells. These data show that integrity of the microtubular system provides the basic mechanism of polarization and orientation which is only modified by interactions with actin-myosin system and cell-substrate adhesions. We suggest that the position of bundled tail microtubules and dispersed microtubules in leading lamella determine polarization in cells lacking stress fibers and focal adhesions. Thus, polarization is based on microtubule-dependent mechanisms both in non-contractile and contractile cells. These mechanisms could switch dependent on circumstances as fibroblasts may acquire non-contractile phenotype, not only after direct inhibition of myosin II but also in certain conditions of microenvironment.     

Tension is required but not sufficient for focal adhesion maturation without a stress fiber template

Focal adhesion composition and size are modulated in a myosin II-dependent maturation process that controls adhesion, migration, and matrix remodeling. As myosin II activity drives stress fiber assembly and enhanced tension at adhesions simultaneously, the extent to which adhesion maturation is driven by tension or altered actin architecture is unknown. We show that perturbations to formin and α-actinin 1 activity selectively inhibited stress fiber assembly at adhesions but retained a contractile lamella that generated large tension on adhesions. Despite relatively unperturbed adhesion dynamics and force transmission, impaired stress fiber assembly impeded focal adhesion compositional maturation and fibronectin remodeling. Finally, we show that compositional maturation of focal adhesions could occur even when myosin II-dependent cellular tension was reduced by 80%. We propose that stress fiber assembly at the adhesion site serves as a structural template that facilitates adhesion maturation over a wide range of tensions. This work identifies the essential role of lamellar actin architecture in adhesion maturation.     

Model of coupled transient changes of Rac, Rho, adhesions and stress fibers alignment in endothelial cells responding to shear stress

Interactions of cell adhesions, Rho GTPases and actin in the endothelial cells' response to external forces are complex and not fully understood, but a qualitative understanding of the mechanosensory response begins to emerge. Here, we formulate a mathematical model of the coupled dynamics of cell adhesions, small GTPases Rac and Rho and actin stress fibers guiding a directional reorganization of the actin cytoskeleton. The model is based on the assumptions that the interconnected cytoskeleton transfers the shear force to the adhesion sites, which in turn transduce the force into a chemical signal that activates integrins at the basal surface of the cell. Subsequently, activated and ligated integrins signal and transiently de-activate Rho, causing the disassembly of actin stress fibers and inhibiting the maturation of focal complexes into focal contacts. Focal complexes and ligated integrins activate Rac, which in turn enhances focal complex assembly. When Rho activity recovers, stress fibers re-assemble and promote the maturation of focal complexes into focal contacts. Merging stress fibers self-align, while the elevated level of Rac activity at the downstream edge of the cell is translated into an alignment of the cells and the newly forming stress fibers in the flow direction. Numerical solutions of the model equations predict transient changes in Rac and Rho that compare well with published experimental results. We report quantitative data on early alignment of the stress fibers and its dependence on cell shape that agrees with the model.