Interplay between Brownian motion and cross-linking controls bundling dynamics in actin networks

Morphology changes in cross-linked actin networks are important in cell motility, division, and cargo transport. Here, we study the transition from a weakly cross-linked network of actin filaments to a heavily cross-linked network of actin bundles through microscopic Brownian dynamics simulations. We show that this transition occurs in two stages: first, a composite bundle network of small and highly aligned bundles evolves from cross-linking of individual filaments and, second, small bundles coalesce into the clustered bundle state. We demonstrate that Brownian motion speeds up the first stage of this process at a faster rate than the second. We quantify the time to reach the composite bundle state and show that it strongly increases as the mesh size increases only when the concentration of cross-links is small and that it remains roughly constant if we decrease the relative ratio of cross-linkers as we increase the actin concentration. Finally, we examine the dependence of the bundling timescale on filament length, finding that shorter filaments bundle faster because they diffuse faster.     

Signal-regulated ADF/cofilin activity and growth cone motility

It is becoming increasingly evident that proteins of the actin depolymerizing factor (ADF)/cofilin family are essential regulators of actin turnover required for many actin-based cellular processes, including motility. ADF can increase actin turnover by either increasing the rate of actin filament treadmilling or by severing actin filaments. In neurons ADF is highly expressed in neuronal growth cones and its activity is regulated by many signals that affect growth cone motility. In addition, increased activity of ADF causes an increase in neurite extension. ADF activity is inhibited upon phosphorylation by LIM kinases (LIMK), kinases activated by members of the Rho family of small GTPases. ADF become dephosphorylated downstream of signal pathways that activate PI-3 kinase or increase levels of intracellular calcium. The growth-regulating effects of ADF together with its ability to be regulated by a wide variety of guidance cues, suggest that ADF may regulate growth cone advance and navigation.     

Polarized actin bundles formed by human fascin-1: their sliding and disassembly on myosin II and myosin V in vitro

Fascin-1 is a putative bundling factor of actin filaments in the filopodia of neuronal growth cones. Here, we examined the structure of the actin bundle formed by human fascin-1 (actin/fascin bundle), and its mode of interaction with myosin in vitro. The distance between cross-linked filaments in the actin/bundle was 8-9 nm, and the bundle showed the transverse periodicity of 36 nm perpendicular to the bundle axis, which was confirmed by electron microscopy. Decoration of the actin/fascin bundle with heavy meromyosin revealed that the arrowheads of filaments in the bundle pointed in the same direction, indicating that the bundle has polarity. This result suggested that fascin-1 plays an essential role in polarity of actin bundles in filopodia. In the in vitro motility assay, actin/fascin bundles slid as fast as single actin filaments on myosin II and myosin V. When myosin was attached to the surface at high density, the actin/fascin bundle disassembled to single filaments at the pointed end of the bundle during sliding. These results suggest that myosins may drive filopodial actin bundles backward by interacting with actin filaments on the surface, and may induce disassembly of the bundle at the basal region of filopodia.     

Calmodulin dissociation regulates brush border myosin I (110-kD- calmodulin) mechanochemical activity in vitro

110-kD-calmodulin, when immobilized on nitrocellulose-coated coverslips, translocates actin filaments at a maximal rate of 0.07-0.1 micron/s at 37 degrees C. Actin activates MgATPase activity greater than 40-fold, with a Km of 40 microM and Vmax of 0.86 s-1 (323 nmol/min/mg). The rate of motility mediated by 110-kD-calmodulin is dependent on temperature and concentration of ATP, but independent of time, actin filament length, amount of enzyme, or ionic strength. Tropomyosin inhibits actin binding by 110-kD-calmodulin in MgATP and inhibits motility. Micromolar calcium slightly increases the rate of motility and increases the actin-activated MgATP hydrolysis of the intact complex. In 0.1 mM or higher calcium, motility ceases and actin-dependent MgATPase activity remains at a low rate not activated by increasing actin concentration. Correlated with these inhibitions of activity, a subset of calmodulin is dissociated from the complex. To determine if calmodulin loss is the cause of calcium inhibition, we assayed the ability of calmodulin to rescue the calcium-inactivated enzyme. Readdition of calmodulin to the nitrocellulose-bound, calcium-inactivated enzyme completely restores motility. Addition of calmodulin also restores actin activation to MgATPase activity in high calcium, but does not affect the activity of the enzyme in EGTA. These results demonstrate that in vitro 110-kD-calmodulin functions as a calcium-sensitive mechanoenzyme, a vertebrate myosin I. The properties of this enzyme suggest that despite unique structure and regulation, myosins I and II share a molecular mechanism of motility.     

The Stepping Pattern of Myosin X Is Adapted for Processive Motility on Bundled Actin

Myosin X is a molecular motor that is adapted to select bundled actin filaments over single actin filaments for processive motility. Its unique form of motility suggests that myosin X's stepping mechanism takes advantage of the arrangement of actin filaments and the additional target binding sites found within a bundle. Here we use fluorescence imaging with one-nanometer accuracy to show that myosin X takes steps of ∼18 nm along a fascin-actin bundle. This step-size is well short of the 36-nm step-size observed in myosin V and myosin VI that corresponds to the actin pseudohelical repeat distance. Myosin X is able to walk along bundles with this step-size if it straddles two actin filaments, but would be quickly forced to spiral into the constrained interior of the bundle if it were to use only a single actin filament. We also demonstrate that myosin X takes many sideways steps as it walks along a bundle, suggesting that it can switch actin filament pairs within the bundle as it walks. Sideways steps to the left or the right occur on bundles with equal frequency, suggesting a degree of lateral flexibility such that the motor's working stroke does not bias it to the left or to the right. On single actin filaments, we find a broad mixture of 10-20-nm steps, which again falls short of the 36-nm actin repeat. Moreover, the motor leans to the right as it walks along single filaments, which may require myosin X to adopt strained configurations. As a control, we also tracked myosin V stepping along actin filaments and fascin-actin bundles. We find that myosin V follows a narrower path on both structures, walking primarily along one surface of an actin filament and following a single filament within a bundle while occasionally switching to neighboring filaments. Together, these results delineate some of the structural features of the motor and the track that allow myosin X to recognize actin filament bundles.     

Force of an actin spring

Cellular movements are produced by forces. Typically, cytoskeletal proteins such as microtubules and actin filaments generate forces via polymerization or in conjunction with molecular motors. However, the fertilization of a Limulus polyphemus egg involves a third type of actin-based cellular engine--a biological spring. During the acrosome reaction, a 60-microm long coiled and twisted bundle of actin filaments straightens and extends from a sperm cell, penetrating the vitelline layer surrounding the egg. A subtle overtwist of 0.2 degrees /subunit underlies the mechanochemical basis for the extension of this actin spring. Upon calcium activation, this conformational strain energy is converted to mechanical work, generating the force required to extend the bundle through the vitelline layer. In this article, we stall the extension of the acrosome bundle in agarose gels of different concentrations. From the stall forces, we estimate a maximum force of 2 nN and a puncturing pressure of 1.6 MPa. We show the maximum force of extension is three times larger than the force required to puncture the vitelline layer. Thus, the elastic strain energy stored in the acrosome bundle is more than sufficient to power the acrosome reaction through the egg envelope.     

Reconstitution in vitro of MSP-based filopodium extension in nematode sperm

The major sperm protein (MSP) motility system in nematode sperm is best known for propelling the movement of mature sperm, where it has taken over the role usually played by actin in amoeboid cell motility. However, MSP filaments also drive the extension of filopodia, transient organelles composed of a core bundle of MSP filaments, that form in the late in sperm development but are not found on crawling cells. We have reconstituted filopodial extension in vitro whereby thin bundles of MSP filaments, each enveloped by a membrane sheath at their growing end, elongated at rates up to 17 microm/min. These bundles often exceeded 500 microm in length but were comprised of filaments only 1 microm long. The reconstituted filopodia assembled in the same cell-free sperm extracts that produced MSP fibers, robust meshworks of filaments that exhibit the same organization and dynamics as the lamellipodial filament system that propels sperm movement. The filopodia and fibers that assembled in vitro both had a membranous structure at their growing end, shared four MSP accessory proteins, and responded identically to agents that alter MSP-based motility by modulating protein phosphorylation. However, filopodia grew three- to four-fold faster than fibers. The reconstitution of filopodial extension shows that, like the actin cytoskeleton, MSP filaments can adopt two architectures, bundles and meshworks, each capable of pushing against membranes to generate protrusion. The reconstitution of both forms of motility in the same in vitro system provides a promising avenue for understanding how the forces for membrane protrusion are produced.     

Calcium regulation of thin filament movement in an in vitro motility assay.

The ability of calcium to regulate thin filament sliding velocity was studied in an in vitro motility assay system using cardiac troponin and tropomyosin and rhodamine-phalloidin-labeled skeletal actin and skeletal heavy meromyosin to propel the filaments. Measurements showed that both the number of thin filaments sliding and their sliding speed (Sf) were dependent on the calcium concentration in the range of pCa 5 to 9. Thin filament motility was completely inhibited only if troponin and tropomyosin were added at a concentration of 100 nM to the motility assay solution and the pCa was more than 8. The filament sliding speed was dependent on the pCa in a noncooperative fashion (Hill coefficient = 1) and reached maximum at 5 microns/s at a pCa of 5. The number of filaments moving uniformly decreased from > 90% at pCa 5-6 to near zero in less than 1 pCa unit. This behavior may be explained by a hypothesis in which the regulatory proteins control the number of cross-bridge heads interacting with the thin filaments rather than the rate at which they individually hydrolyze ATP or translocate the thin filaments.     

The Actin Filament-Binding Protein Coronin Regulates Motility in Plasmodium Sporozoites

Parasites causing malaria need to migrate in order to penetrate tissue barriers and enter host cells. Here we show that the actin filament-binding protein coronin regulates gliding motility in Plasmodium berghei sporozoites, the highly motile forms of a rodent malaria-causing parasite transmitted by mosquitoes. Parasites lacking coronin show motility defects that impair colonization of the mosquito salivary glands but not migration in the skin, yet result in decreased transmission efficiency. In non-motile sporozoites low calcium concentrations mediate actin-independent coronin localization to the periphery. Engagement of extracellular ligands triggers an intracellular calcium release followed by the actin-dependent relocalization of coronin to the rear and initiation of motility. Mutational analysis and imaging suggest that coronin organizes actin filaments for productive motility. Using coronin-mCherry as a marker for the presence of actin filaments we found that protein kinase A contributes to actin filament disassembly. We finally speculate that calcium and cAMP-mediated signaling regulate a switch from rapid parasite motility to host cell invasion by differentially influencing actin dynamics.     

Stored elastic energy powers the 60-microm extension of the Limulus polyphemus sperm actin bundle

During the 5 s of the acrosome reaction of Limulus polyphemus sperm, a 60-microm-long bundle of scruin-decorated actin filaments straightens from a coiled conformation and extends from the cell. To identify the motive force for this movement, we examined the possible sources of chemical and mechanical energy and show that the coil releases approximately 10-13 J of stored mechanical strain energy, whereas chemical energy derived from calcium binding is approximately 10-15 J. These measurements indicate that the coiled actin bundle extends by a spring-based mechanism, which is distinctly different from the better known polymerization or myosin-driven processes, and that calcium initiates but does not power the reaction.     

Cofilin/ADF is required for cell motility during Drosophila ovary development and oogenesis

The driving force behind cell motility is the actin cytoskeleton. Filopodia and lamellipodia are formed by the polymerization and extension of actin filaments towards the cell membrane. This polymerization at the barbed end of the filament is balanced by depolymerization at the pointed end, recycling the actin in a 'treadmilling' process. One protein involved in this process is cofilin/actin-depolymerizing factor (ADF), which can depolymerize actin filaments, allowing treadmilling to occur at an accelerated rate. Cofilin/ADF is an actin-binding protein that is required for actin-filament disassembly, cytokinesis and the organization of muscle actin filaments. There is also evidence that cofilin/ADF enhances cell motility, although a direct requirement in vivo has not yet been shown. Here we show that Drosophila cofilin/ADF, which is encoded by the twinstar (tsr) gene, promotes cell movements during ovary development and oogenesis. During larval development, cofilin/ADF is required for the cell rearrangement needed for formation of terminal filaments, stacks of somatic cells that are important for the initiation of ovarioles. It is also required for the migration of border cells during oogenesis. These results show that cofilin/ADF is an important regulator of actin-based cell motility during Drosophila development.     

Drosophila quail, a villin-related protein, bundles actin filaments in apoptotic nurse cells

Drosophila Quail protein is required for the completion of fast cytoplasm transport from nurse cells to the oocyte, an event critical for the production of viable oocytes. The abundant network of cytoplasmic filamentous actin, established at the onset of fast transport, is absent in quail mutant egg chambers. Previously, we showed that Quail is a germline-specific protein with sequence homology to villin, a vertebrate actin-regulating protein. In this study, we combined biochemical experiments with observations in egg chambers to define more precisely the function of this protein in the regulation of actin-bundle assembly in nurse cells. We report that recombinant Quail can bind and bundle filamentous actin in vitro in a manner similar to villin at a physiological calcium concentration. In contrast to villin, Quail is unable to sever or cap filamentous actin, or to promote nucleation of new actin filaments at a high calcium concentration. Instead, Quail bundles the filaments regardless of the calcium concentration. In vivo, the assembly of nurse-cell actin bundles is accompanied by extensive perforation of the nurse-cell nuclear envelopes, and both of these phenomena are manifestations of nurse-cell apoptosis. To investigate whether free calcium levels are affected during apoptosis, we loaded egg chambers with the calcium indicator Indo-1. Our observations indicate a rise in free calcium in the nurse-cell cytoplasm coincident with the permeabilization of the nuclear envelopes. We also show that human villin expressed in the Drosophila germline could sense elevated cytoplasmic calcium; in nurse cells with reduced levels of Quail protein, villin interfered with actin-bundle stability. We conclude that Quail efficiently assembles actin filaments into bundles in nurse cells and maintains their stability under fluctuating free calcium levels. We also propose a developmental model for the fast phase of cytoplasm transport incorporating findings presented in this study.     

Capping protein increases the rate of actin-based motility by promoting filament nucleation by the Arp2/3 complex

Capping protein (CP) is an integral component of Arp2/3-nucleated actin networks that drive amoeboid motility. Increasing the concentration of capping protein, which caps barbed ends of actin filaments and prevents elongation, increases the rate of actin-based motility in vivo and in vitro. We studied the synergy between CP and Arp2/3 using an in vitro actin-based motility system reconstituted from purified proteins. We find that capping protein increases the rate of motility by promoting more frequent filament nucleation by the Arp2/3 complex and not by increasing the rate of filament elongation as previously suggested. One consequence of this coupling between capping and nucleation is that, while the rate of motility depends strongly on the concentration of CP and Arp2/3, the net rate of actin assembly is insensitive to changes in either factor. By reorganizing their architecture, dendritic actin networks harness the same assembly kinetics to drive different rates of motility.     

Osmoelastic coupling in biological structures: formation of parallel bundles of actin filaments in a crystalline-like structure caused by osmotic stress

A high molecular weight inert molecule, poly(ethylene glycol) (PEG), or a soluble protein, ovalbumin, causes parallel bundles of actin filaments in a crystalline-like structure under physiological conditions of ionic compositions and pH. The bundle formation depends on the molecular weight of PEG, and a larger molecular weight of PEG can make the bundle at a lower concentration. Actin bundle formation has a discrete dependence on the concentration of PEG. The light scattering following PEG-induced bundle formation increased abruptly at 4.5% (w/w) PEG 6000, while at concentrations less than or equal to 4.0% (w/w) no increase was observed. Labeling actin filaments with heavy meromyosin indicated that the polarity of the filament in the bundle is random. The PEG-induced bundle formation depends on the ionic strength of the solutions and also the concentration of the filament, showing that a higher concentration of PEG was required at lower ionic strength or a lower concentration of the filament. The results described above cannot be explained on the basis of the postulation that the direct binding of PEG molecules to the actin filaments may cause bundle formation. Alternatively, the mechanism can be explained reasonably by the theory of osmoelastic coupling based on preferential exclusion of PEG molecules from the filament surface. High molecular weight molecules such as PEG should be preferentially excluded from the region adjacent to the actin filaments (exclusion layer) by steric hindrance, thereby making imbalance of osmolarity between the bulk and the exclusion layer. This imbalance puts an osmotic stress on the actin filament.(ABSTRACT TRUNCATED AT 250 WORDS)     

Inorganic polyphosphate hydrolysis catalyzed by skeletal muscular actomyosin complexes is uncoupled with motility

Hydrolysis of the triphosphate moiety of ATP, catalyzed by myosin, induces alterations in the affinity of the myosin heads for actin filaments via conformational changes, thereby causing motility of the actomyosin complexes. To elucidate the contribution of the triphosphate group attached to adenosine, we examined the enzymatic activity of heavy meromyosin (HMM) with actin filaments for inorganic tripolyphosphate (3PP) using a Malachite green method and evaluated using fluorescence microscopy the effects of 3PP on actin filament motility on HMM-coated glass slides. In the presence of MgCl₂, HMM hydrolyzed 3PP at a maximum rate of 0.016 s⁻¹ HMM⁻¹, which was four times lower than the hydrolysis rate of ATP. Tetrapolyphosphate (4PP) was hydrolyzed at a rate similar to that of 3PP hydrolysis. The hydrolysis rates of 3PP and 4PP were enhanced by roughly 10-fold in the presence of actin filaments. In motility assays, the presence of polyphosphates did not lead to the sliding movement of actin filaments. Moreover, in the presence of ATP at low concentrations, the sliding velocity of actin filaments decreased as the concentration of added polyphosphate increased, indicating a competitive binding of polyphosphate to myosin heads with ATP. These results suggested that the energy produced by standalone triphosphate hydrolysis did not induce the unidirectional motion of actomyosin and that the link between triphosphate and adenosine was crucial for motility.     

Gelsolin as a calcium-regulated actin filament-capping protein.

Various concentrations of gelsolin (25-100 nM) were added to 2 microM polymerized actin. The concentrations of free calcium were adjusted to 0.05-1.5 microM by EGTA/Ca2+ buffer. Following addition of gelsolin actin depolymerization was observed that was caused by dissociation of actin subunits from the pointed ends of treadmilling actin filaments and inhibition by gelsolin of polymerization at barbed ends. The time course of depolymerization revealed an initial lag phase that was followed by slow decrease of the concentration of polymeric actin to reach the final steady state polymer and monomer concentration. The initial lag phase was pronounced at low free calcium and low gelsolin concentrations. On the basis of quantitative analysis the kinetics of depolymerization could be interpreted as capping, i.e. binding of gelsolin to the barbed ends of actin filaments and subsequent inhibition of polymerization, rather than severing. The main argument for this conclusion was that even gelsolin concentrations (100 nM) that exceed the concentration of filament ends ( approximately 2 nM), cause the filaments to depolymerize at a rate that is similar to the rate of depolymerization of the concentration of pointed ends existing before addition of gelsolin. The rate of capping is directly proportional to the free calcium concentration. These experiments demonstrate that at micromolar and submicromolar free calcium concentrations gelsolin acts as a calcium-regulated capping protein but not as an actin filament severing protein, and that the calcium binding sites of gelsolin which regulate the various functions of gelsolin (capping, severing and monomer binding), differ in their calcium affinity.     

Characterization of in vitro motility assays using smooth muscle and cytoplasmic myosins

We have used two in vitro motility assays to study the relative movement of actin and myosin from turkey gizzards (smooth muscle) and human platelets. In the Nitella-based in vitro motility assay, myosin-coated polymer beads move over a fixed substratum of actin bundles derived from dissection of the alga, Nitella, whereas in the sliding actin filament assay fluorescently labeled actin filaments slide over myosin molecules adhered to a glass surface. Both assay systems yielded similar relative velocities using smooth muscle myosin and actin under our standard conditions. We have studied the effects of ATP, ionic strength, magnesium, and tropomyosin on the velocity and found that with the exception of the dependence on MgCl2, the two assays gave very similar results. Calcium over a concentration of pCa 8 to 4 had no effect on the velocity of actin filaments. Phosphorylated smooth muscle myosin propelled filaments of smooth muscle and skeletal muscle actin at the same rate. Phosphorylated smooth muscle and cytoplasmic myosin monomers also moved actin filaments, demonstrating that filament formation is not required for movement.     

Actin filament polymerization regulates gliding motility by apicomplexan parasites

Host cell entry by Toxoplasma gondii depends critically on actin filaments in the parasite, yet paradoxically, its actin is almost exclusively monomeric. In contrast to the absence of stable filaments in conventional samples, rapid-freeze electron microscopy revealed that actin filaments were formed beneath the plasma membrane of gliding parasites. To investigate the role of actin filaments in motility, we treated parasites with the filament-stabilizing drug jasplakinolide (JAS) and monitored the distribution of actin in live and fixed cells using yellow fluorescent protein (YFP)-actin. JAS treatment caused YFP-actin to redistribute to the apical and posterior ends, where filaments formed a spiral pattern subtending the plasma membrane. Although previous studies have suggested that JAS induces rigor, videomicroscopy demonstrated that JAS treatment increased the rate of parasite gliding by approximately threefold, indicating that filaments are rate limiting for motility. However, JAS also frequently reversed the normal direction of motility, disrupting forward migration and cell entry. Consistent with this alteration, subcortical filaments in JAS-treated parasites occurred in tangled plaques as opposed to the straight, roughly parallel orientation observed in control cells. These studies reveal that precisely controlled polymerization of actin filaments imparts the correct timing, duration, and directionality of gliding motility in the Apicomplexa.     

Troponin is a potential regulator for actomyosin interactions

Troponin extracted from rabbit skeletal muscle directly binds to an actin filament in a molar ratio of 1:1 even in the absence of tropomyosin. An actin filament decorated with troponin did not exhibit significant difference from pure actin filaments in the maximum rate of actomyosin ATP hydrolysis and the sliding velocity of the filament examined by means of an in vitro motility assay. However, the relative number of troponin-bound actin filaments moving in the absence of calcium ions decreased to half that in their presence. The amount of HMM bound to the filaments was less than 4% of actin monomers in the presence of TNs. In addition, actin filaments could not move when Tn molecules were bound in the molar ratio of about 1:1 although they sufficiently bind to myosin heads. These results indicate that troponin can transform an actin monomer within a filament into an Off-state without sterically blocking of the myosin-binding sites with tropomyosin molecules.     

Breaking the WAVE complex: the point of Arabidopsis trichomes

Actin filaments comprise an essential cytoskeletal array that organizes the cytoplasm during growth and cell division. In growing cells, actin filaments carry out many functions. Actin filaments position the endomembrane system and act as a substrate on which organelle motility occurs. Other actin-filament arrays appear to be more dynamic and to reorganize in response to growth signals and external cues. The diverse cellular functions of the actin cytoskeleton are mediated by actin-binding proteins that nucleate, destabilize, and bundle actin filaments. The distorted trichome morphology mutants provide a simple genetic system in which to study mechanisms of actin-dependent morphogenesis. Recent results from several groups indicate that 'distorted group' genes encode subunits of the actin-related protein (Arp)2/3 and WAVE complexes, and function in a cell morphogenesis pathway.