Interaction of human 3-phosphoglycerate kinase with L-ADP, the mirror image of D-ADP

l-Nucleoside-analogues, mirror images of the natural d-nucleosides, are a new class of antiviral and anticancer agents. In the cell they have to be phosphorylated to pharmacologically active triphosphate forms, the last step seems to involve human 3-phosphoglycerate kinase (hPGK). Here we present a steady state kinetic and biophysical study of the interaction of the model compound l-MgADP with hPGK. l-MgADP is a good substrate with k_cat and K_m values of 685 s⁻¹ and 0.27 mM, respectively. Double inhibition studies suggest that l-MgADP binds to the specific adenosine-binding site and protects the conformation of hPGK molecule against heat denaturation, as detected by microcalorimetry. Structural details of the interaction in the enzyme active site are different for the d- and l-enantiomers (e.g. the effect of Mg²⁺), but these differences do not prevent the occurrence of the catalytic cycle, which is accompanied by the hinge-bending domain closure, as indicated by SAXS measurements.     

Evolutionary Optimization of Computationally Designed Enzymes: Kemp Eliminases of the KE07 Series

Understanding enzyme catalysis through the analysis of natural enzymes is a daunting challenge—their active sites are complex and combine numerous interactions and catalytic forces that are finely coordinated. Study of more rudimentary (wo)man-made enzymes provides a unique opportunity for better understanding of enzymatic catalysis. KE07, a computationally designed Kemp eliminase that employs a glutamate side chain as the catalytic base for the critical proton abstraction step and an apolar binding site to guide substrate binding, was optimized by seven rounds of random mutagenesis and selection, resulting in a > 200-fold increase in catalytic efficiency. Here, we describe the directed evolution process in detail and the biophysical and crystallographic studies of the designed KE07 and its evolved variants. The optimization of KE07's activity to give a k_cat/K_M value of ∼ 2600 s^− 1 M^− 1 and an ∼ 10⁶-fold rate acceleration (k_cat/k_uncat) involved the incorporation of up to eight mutations. These mutations led to a marked decrease in the overall thermodynamic stability of the evolved KE07s and in the configurational stability of their active sites. We identified two primary contributions of the mutations to KE07's improved activity: (i) the introduction of new salt bridges to correct a mistake in the original design that placed a lysine for leaving-group protonation without consideration of its “quenching” interactions with the catalytic glutamate, and (ii) the tuning of the environment, the pK_a of the catalytic base, and its interactions with the substrate through the evolution of a network of hydrogen bonds consisting of several charged residues surrounding the active site.     

Effect of ethanol on spectral binding, inhibition, and activity of CYP3A4 with an antiretroviral drug nelfinavir

Cytochrome P450 3A4 (CYP3A4) is the most abundant CYP enzyme in the liver and metabolizes approximately 50% of the drugs, including antiretrovirals. Although CYP3A4 induction by ethanol and impact of CYP3A4 on drug metabolism and toxicity is known, CYP3A4-ethanol physical interaction and its impact on drug binding, inhibition, or metabolism is not known. Therefore, we studied the effect of ethanol on binding and inhibition of CYP3A4 with a representative protease inhibitor, nelfinavir, followed by the effect of alcohol on nelfinavir metabolism. Our initial results showed that methanol, ethanol, isopropanol, isobutanol, and isoamyl alcohol bind in the active site of CYP3A4 and exhibit type I spectra. Among these alcohol compounds, ethanol showed the lowest K_D (5.9 ± 0.34 mM), suggesting its strong binding affinity with CYP3A4. Ethanol (20 mM) decreased the K_D of nelfinavir by >5-fold (0.041 ± 0.007 vs. 0.227 ± 0.038 μM). Similarly, 20 mM ethanol decreased the IC₅₀ of nelfinavir by >3-fold (2.6 ± 0.5 vs. 8.3 ± 3.1 μM). These results suggest that ethanol facilitates binding of nelfinavir with CYP3A4. Furthermore, we performed nelfinavir metabolism using LCMS. Although ethanol did not alter k_cat, it decreased the K_m of nelfinavir, suggesting a decrease in catalytic efficiency (k_cat/K_m). This is an important finding because alcoholism is prevalent in HIV-1-infected persons and alcohol is shown to decrease the response to antiretroviral therapy.     

Methanothermobacter thermautotrophicus tRNA Gln confines the amidotransferase GatCAB to asparaginyl-tRNA Asn formation

Many prokaryotes form the amide aminoacyl-tRNAs glutaminyl-tRNA and asparaginyl-tRNA by tRNA-dependent amidation of the mischarged tRNA species, glutamyl-tRNA^Gln or aspartyl-tRNA^Asn. Archaea employ two such amidotransferases, GatCAB and GatDE, while bacteria possess only one, GatCAB. The Methanothermobacter thermautotrophicus GatDE is slightly more efficient using Asn as an amide donor than Gln (k_cat/K_M of 5.4 s⁻¹/mM and 1.2 s⁻¹/mM, respectively). Unlike the bacterial GatCAB enzymes studied to date, the M. thermautotrophicus GatCAB uses Asn almost as well as Gln as an amide donor (k_cat/K_M of 5.7 s⁻¹/mM and 16.7 s⁻¹/mM, respectively). In contrast to the initial characterization of the M. thermautotrophicus GatCAB as being able to form Asn-tRNA^Asn and Gln-tRNA^Gln, our data demonstrate that while the enzyme is able to transamidate Asp-tRNA^Asn (k_cat/K_M of 125 s⁻¹/mM) it is unable to transamidate M. thermautotrophicus Glu-tRNA^Gln. However, M. thermautotrophicus GatCAB is capable of transamidating Glu-tRNA^Gln from H. pylori or B. subtilis, and M. thermautotrophicus Glu-tRNA^Asn. Thus, M. thermautotrophicus encodes two amidotransferases, each with its own activity, GatDE for Gln-tRNA and GatCAB for Asn-tRNA synthesis.     

Catalytic role of the calcium ion in GH97 inverting glycoside hydrolase

The role of calcium ion in the active site of the inverting glycoside hydrolase family 97 enzyme, BtGH97a, was investigated through structural and kinetic studies. The calcium ion was likely directly involved in the catalytic reaction. The pH dependence of k_cat/K_m values in the presence or absence of calcium ion indicated that the calcium ion lowered the pK_a of the base catalyst. The significant decreases in k_cat/K_m for hydrolysis of substrates with basic leaving groups in the absence of calcium ion confirmed that the calcium ion facilitated the leaving group departure.     

Kinetic studies of Gly28:Ser mutant form of Bacillus pumilus lipase: Changes in kcat and thermal dependence

Lipases are useful catalysts for a wide variety of industrial purposes. Herein we report the stability and thermal dependence of the activity of wild-type Bacillus pumilus lipase (BplA) and four site-directed mutants designed to improve its thermal stability. The Gly28:Ser mutation produces a dramatic four-fold increase in its k_cat and a remarkable increase in its stability. While the increase in k_cat is temperature-independent, the increase in stability shows that the resultant interactions of this mutation have a strong enthalpic component. Thermal dependence of stability, k_cat, K_M and k_cat/K_M were analysed to gain insight on the structural effects of mutations on BplA. Our results are consistent with a gain in enzyme mobility for those mutants displaying enhanced catalytic properties; the analysis of thermal dependence of kinetic parameters indicates that the mutations did not change either the catalytic mechanism or the rate-limiting step of catalysis.     

Free energy analysis of ω-transaminase reactions to dissect how the enzyme controls the substrate selectivity

ω-Transaminase (ω-TA) is the only naturally occurring enzyme allowing asymmetric amination of ketones for production of chiral amines. The active site of the enzyme was proposed to consist of two differently sized substrate binding pockets and the stringent steric constraint in the small pocket has presented a significant challenge to production of structurally diverse chiral amines. To provide a mechanistic understanding of how the (S)-specific ω-TA from Paracoccus denitrificans achieves the steric constraint in the small pocket, we developed a free energy analysis enabling quantification of individual contributions of binding and catalytic steps to changes in the total activation energy caused by structural differences in the substrate moiety that is to be accommodated by the small pocket. The analysis exploited kinetic and thermodynamic investigations using structurally similar substrates and the structural differences among substrates were regarded as probes to assess how much relative destabilizations of the reaction intermediates, i.e. the Michaelis complex and the transition state, were induced by the slight change of the substrate moiety inside the small pocket. We found that ≈80% of changes in the total activation energy resulted from changes in the enzyme-substrate binding energy, indicating that substrate selectivity in the small pocket is controlled predominantly by the binding step (K_M) rather than the catalytic step (k_cat). In addition, we examined the pH dependence of the kinetic parameters and the pH profiles of the K_M and k_cat values suggested that key active site residues involved in the binding and catalytic steps are decoupled. Taken together, these findings suggest that the active site residues forming the small pocket are mainly engaged in the binding step but not significantly involved in the catalytic step, which may provide insights into how to design a rational strategy for engineering of the small pocket to relieve the steric constraint toward bulky substituents.     

Analysis of electrostatic coupling throughout the laboratory evolution of a designed retroaldolase

The roles of local interactions in the laboratory evolution of a highly active, computationally designed retroaldolase (RA) are examined. Partial Order Optimum Likelihood (POOL) is used to identify catalytically important amino acid interactions in several RA95 enzyme variants. The series RA95.5, RA95.5–5, RA95.5–8, and RA95.5–8F, representing progress along an evolutionary trajectory with increasing activity, is examined. Computed measures of coupling between charged states of residues show that, as evolution proceeds and higher activities are achieved, electrostatic coupling between the biochemically active amino acids and other residues is increased. In silico residue scanning suggests multiple coupling partners for the catalytic lysine K83. The effects of two predicted partners, Y51 and E85, are tested using site‐directed mutagenesis and kinetic analysis of the variants Y51F and E85Q. The Y51F variants show decreases in k _cat relative to wild type, with the greatest losses observed for the more evolved constructs; they also exhibit significant decreases in k _cat/K _M across the series. Only modest decreases in k _cat/K _M are observed for the E85Q variants with little effect on k _cat. Computed metrics of the degree of coupling between protonation states rise significantly as evolution proceeds and catalytic turnover rate increases. Specifically, the charge state of the catalytic lysine K83 becomes more strongly coupled to those of other amino acids as the enzyme evolves to a better catalyst.     

Contributions of binding and catalytic rate constants to evolutionary modifications inKm of NADH for muscle-type (M4) lactate dehydrogenases

Summary The apparent Michaelis constant (K _m) of NADH for muscle-type (M₄ isozyme) lactate dehydrogenases (LDHs) is highest, at any given temperature of measurement, for LDHs of cold-adapted vertebrates (Table 1). However, these interspecific differences in theK _m of NADH are not due to variations in LDH-NADH binding affinity. Rather, theK _m differences result entirely from interspecific variation in the substrate turnover constant (k _cat) (Fig. 1; Table 2). This follows from the fact that theK _m of NADH is equal tok _cat divided by the on constant for NADH binding to LDH,k ₁, so that interspecific differences ink _cat, combined with identical values fork ₁ among different LDH reactions, make the magnitude of theK _m of NADH a function of substrate turnover number. The temperature dependence of theK _m of NADH for a single LDH homologue is the net result of temperature dependence of bothk _cat andk ₁ (Figs. 3 and 4). Temperature independentK _m values can result from simultaneous, and algebraically offsetting, increases ink _cat andk ₁ with rising temperature. Salt-induced changes in theK _m of NADH also may be due to simultaneous perturbation of bothk _cat andk ₁ (Table 3). These findings are discussed from the standpoint of the evolution of LDH kinetic properties, particularly the interspecific conservation of catalytic and regulatory functions, in differently-adapted species.     

Enhancement of the thermostability and the catalytic efficiency of Bacillus pumilus CBS protease by site-directed mutagenesis

The serine alkaline protease, SAPB, from Bacillus pumilus CBS is characterized by its high thermoactivity, pH stability and high catalytic efficiency (k_cat/K_m) as well as its excellent stability and compatibility with an alkaline environment under harsh washing conditions. Based on sequence alignments and homology-modeling studies, the present study identified five amino acids Leu31, Thr33, Asn99, Phe159 and Gly182 being putatively important for the enzymatic behaviour of SAPB. To corroborate the role of these residues, 12 mutants were constructed by site-directed mutagenesis and then purified and characterized. The findings demonstrate that the single mutants F159T, F159S and G182S and combined double substitutions were implicated in the decrease of the optimum pH and temperature to 8.0–9.0 and 50 °C, respectively, and that mutant F159T/S clearly affected substrate affinity and catalytic efficiency. With regards to the single L31I, T33S and N99Y and combined double and triple mutations, the N99Y mutation strongly improved the half-life times at 50 °C and 60 °C to 660 and 295 min from of 220 and 80 min for the wild-type enzyme, respectively. More interestingly, this mutation also shifted the optimum temperature from 65 °C to 75 °C and caused a prominent 31-fold increase in k_cat/K_m with N-succinyl-l-Ala-Ala-Pro-Phe-p-nitroanilide (AAPF). The L31I and T33S mutants were observed to improve mainly the optimum pH from 11.0 to 11.5 and from 11.0 to 12.0, respectively. Kinetic studies of double and triple mutants showed that the cumulative effect of polar uncharged substitutions had a synergistic effect on the P1 position preference using synthetic peptide substrates, which confirms the implication of these amino acids in substrate recognition and catalytic efficiency.     

Exploration of Alternate Catalytic Mechanisms and Optimization Strategies for Retroaldolase Design

Designed retroaldolases have utilized a nucleophilic lysine to promote carbon–carbon bond cleavage of β-hydroxy-ketones via a covalent Schiff base intermediate. Previous computational designs have incorporated a water molecule to facilitate formation and breakdown of the carbinolamine intermediate to give the Schiff base and to function as a general acid/base. Here we investigate an alternative active-site design in which the catalytic water molecule was replaced by the side chain of a glutamic acid. Five out of seven designs expressed solubly and exhibited catalytic efficiencies similar to previously designed retroaldolases for the conversion of 4-hydroxy-4-(6-methoxy-2-naphthyl)-2-butanone to 6-methoxy-2-naphthaldehyde and acetone. After one round of site-directed saturation mutagenesis, improved variants of the two best designs, RA114 and RA117, exhibited among the highest k_cat (> 10^− 3 s^− 1) and k_cat/K_M (11–25 M^− 1 s^− 1) values observed for retroaldolase designs prior to comprehensive directed evolution. In both cases, the > 10⁵-fold rate accelerations that were achieved are within 1–3 orders of magnitude of the rate enhancements reported for the best catalysts for related reactions, including catalytic antibodies (k_cat/k_uncat = 10⁶ to 10⁸) and an extensively evolved computational design (k_cat/k_uncat > 10⁷). The catalytic sites, revealed by X-ray structures of optimized versions of the two active designs, are in close agreement with the design models except for the catalytic lysine in RA114. We further improved the variants by computational remodeling of the loops and yeast display selection for reactivity of the catalytic lysine with a diketone probe, obtaining an additional order of magnitude enhancement in activity with both approaches.     

Key aromatic residues at subsites + 2 and + 3 of glycoside hydrolase family 31 α-glucosidase contribute to recognition of long-chain substrates

Glycoside hydrolase family 31 α-glucosidases (31AGs) show various specificities for maltooligosaccharides according to chain length. Aspergillus niger α-glucosidase (ANG) is specific for short-chain substrates with the highest k_cat/K_m for maltotriose, while sugar beet α-glucosidase (SBG) prefers long-chain substrates and soluble starch. Multiple sequence alignment of 31AGs indicated a high degree of diversity at the long loop (N-loop), which forms one wall of the active pocket. Mutations of Phe236 in the N-loop of SBG (F236A/S) decreased k_cat/K_m values for substrates longer than maltose. Providing a phenylalanine residue at a similar position in ANG (T228F) altered the k_cat/K_m values for maltooligosaccharides compared with wild-type ANG, i.e., the mutant enzyme showed the highest k_cat/K_m value for maltotetraose. Subsite affinity analysis indicated that modification of subsite affinities at + 2 and + 3 caused alterations of substrate specificity in the mutant enzymes. These results indicated that the aromatic residue in the N-loop contributes to determining the chain-length specificity of 31AGs.     

Role of connecting loop I in catalysis and allosteric regulation of human glucokinase

Glucokinase (GCK, hexokinase IV) is a monomeric enzyme with a single glucose binding site that displays steady‐state kinetic cooperativity, a functional characteristic that affords allosteric regulation of GCK activity. Structural evidence suggests that connecting loop I, comprised of residues 47–71, facilitates cooperativity by dictating the rate and scope of motions between the large and small domains of GCK. Here we investigate the impact of varying the length and amino acid sequence of connecting loop I upon GCK cooperativity. We find that sequential, single amino acid deletions from the C‐terminus of connecting loop I cause systematic decreases in cooperativity. Deleting up to two loop residues leaves the k_cat value unchanged; however, removing three or more residues reduces k_cat by 1000‐fold. In contrast, the glucose K_0.5 and K_D values are unaffected by shortening the connecting loop by up to six residues. Substituting alanine or glycine for proline‐66, which adopts a cis conformation in some GCK crystal structures, does not alter cooperativity, indicating that cis/trans isomerization of this loop residue does not govern slow conformational reorganizations linked to hysteresis. Replacing connecting loop I with the corresponding loop sequence from the catalytic domain of the noncooperative isozyme human hexokinase I (HK‐I) eliminates cooperativity without impacting the k_cat and glucose K_0.5 values. Our results indicate that catalytic turnover requires a minimal length of connecting loop I, whereas the loop has little impact upon the binding affinity of GCK for glucose. We propose a model in which the primary structure of connecting loop I affects cooperativity by influencing conformational dynamics, without altering the equilibrium distribution of GCK conformations.     

OptZyme: Computational Enzyme Redesign Using Transition State Analogues

OptZyme is a new computational procedure for designing improved enzymatic activity (i.e., k_cat or k_cat/K_M) with a novel substrate. The key concept is to use transition state analogue compounds, which are known for many reactions, as proxies for the typically unknown transition state structures. Mutations that minimize the interaction energy of the enzyme with its transition state analogue, rather than with its substrate, are identified that lower the transition state formation energy barrier. Using Escherichia coli β-glucuronidase as a benchmark system, we confirm that K_M correlates (R² = 0.960) with the computed interaction energy between the enzyme and the para-nitrophenyl- β, D-glucuronide substrate, k_cat/K_M correlates (R² = 0.864) with the interaction energy of the transition state analogue, 1,5-glucarolactone, and k_cat correlates (R² = 0.854) with a weighted combination of interaction energies with the substrate and transition state analogue. OptZyme is subsequently used to identify mutants with improved K_M, k_cat, and k_cat/K_M for a new substrate, para-nitrophenyl- β, D-galactoside. Differences between the three libraries reveal structural differences that underpin improving K_M, k_cat, or k_cat/K_M. Mutants predicted to enhance the activity for para-nitrophenyl- β, D-galactoside directly or indirectly create hydrogen bonds with the altered sugar ring conformation or its substituents, namely H162S, L361G, W549R, and N550S.     

Non-linear effects of macromolecular crowding on enzymatic activity of multi-copper oxidase

Enzymes catalyze biochemical reactions in highly crowded environments where the amount of macromolecules may occupy up to 40% of the volume. Here we report how cell-like conditions tune catalytic parameters for the monomeric multi-copper oxidase, Saccharomyces cerevisiae Fet3p, in vitro. At low amounts of crowding agent, we detect increases in both of K_M (weaker substrate binding) and k_cat (improved catalytic efficiency), whereas at higher crowding levels, both parameters were reduced. Presence of crowding agents does not affect Fet3p structural content but increases thermal resistance. The observations are compatible with ordering of a non-optimal substrate-binding site and restricted internal dynamics as a result of excluded volume effects making the protein less structurally ‘strained’.     

Coenzyme specificity of human monomeric carbonyl reductase: contribution of Lys-15, Ala-37 and Arg-38

Short-chain dehydrogenases/reductases catalyze the oxidoreduction of alcohol and carbonyl compounds using either NAD or NADPH as coenzyme. Structural analysis suggests that specificity for NADPH is conferred by two highly conserved basic residues in the N-terminal part of the peptide chain, whereas specificity for NAD correlates with the presence of an Asp adjacent to the position of the distal basic residue in NADP-dependent enzymes. We carried out site-directed mutagenesis of the two basic residues: Lys-15 and Arg-38, as well as of Ala-37 of human monomeric carbonyl reductase in order to investigate their contribution to coenzyme binding and specificity. Substitution of Lys-15 or Arg-38 by Gln and, even more pronounced Asp decreased the catalytic efficiency (k_cat/K_m, NADPH) by more than three orders of magnitude. Similarly, substitution of Asp for Ala-37 decreased k_cat/K_m, NADPH 1000-fold but had little effect on k_cat/K_m, NADH. The results demonstrate the importance of basic residues at positions 15 and 38 and the absence of an acidic residue at position 37 for NADPH binding and catalysis.     

Promiscuity, stability and cold adaptation of a newly isolated acylaminoacyl peptidase

We report on the characterisation of a member of the acylaminoacyl peptidase family, the first isolated from bacteria. The enzyme was obtained from the psychrophilic bacterium Sporosarcina psychrophila and shows the typical features of cold adaptation (low T_m, optimal temperature of 40 °C, poor thermal stability). It was also tested for substrate specificity, effect of metals, temperature dependence and structure stability and revealed promiscuous catalytic activity on at least two chemically distinct substrates, with k_cat/K_m values for ester hydrolysis and acylamino acids cleavage of 1.7 × 10⁴ s⁻¹ M⁻¹ and 6.2 × 10³ s⁻¹ M⁻¹, respectively. Despite some properties cannot be explained with current models, results report on the relevance of structural and catalytic properties for the successful adaptation to cold temperatures.     

Structural and functional analyses of Mycobacterium tuberculosis Rv3315c-encoded metal-dependent homotetrameric cytidine deaminase

The emergence of drug-resistant strains of Mycobacterium tuberculosis, the causative agent of tuberculosis, has exacerbated the treatment and control of this disease. Cytidine deaminase (CDA) is a pyrimidine salvage pathway enzyme that recycles cytidine and 2′-deoxycytidine for uridine and 2′-deoxyuridine synthesis, respectively. A probable M. tuberculosis CDA-coding sequence (cdd, Rv3315c) was cloned, sequenced, expressed in Escherichia coli BL21(DE3), and purified to homogeneity. Mass spectrometry, N-terminal amino acid sequencing, gel filtration chromatography, and metal analysis of M. tuberculosis CDA (MtCDA) were carried out. These results and multiple sequence alignment demonstrate that MtCDA is a homotetrameric Zn²⁺-dependent metalloenzyme. Steady-state kinetic measurements yielded the following parameters: K_m = 1004 μM and k_cat = 4.8 s^?1 for cytidine, and K_m = 1059 μM and k_cat = 3.5 s^?1 for 2′-deoxycytidine. The pH dependence of k_cat and k_cat/K_M for cytidine indicate that protonation of a single ionizable group with apparent pK_a value of 4.3 abolishes activity, and protonation of a group with pK_a value of 4.7 reduces binding. MtCDA was crystallized and crystal diffracted at 2.0 Å resolution. Analysis of the crystallographic structure indicated the presence of a Zn²⁺ coordinated by three conserved cysteines and the structure exhibits the canonical cytidine deaminase fold.     

A role for glutamate-333 of Saccharomyces cerevisiae cystathionine γ-lyase as a determinant of specificity

Cystathionine γ-lyase (CGL) catalyzes the hydrolysis of l-cystathionine (l-Cth), producing l-cysteine (l-Cys), α-ketobutyrate and ammonia, in the second step of the reverse transsulfuration pathway, which converts l-homocysteine (l-Hcys) to l-Cys. Site-directed variants substituting residues E48 and E333 with alanine, aspartate and glutamine were characterized to probe the roles of these acidic residues, conserved in fungal and mammalian CGL sequences, in the active-site of CGL from Saccharomyces cerevisiae (yCGL). The pH optimum of variants containing the alanine or glutamine substitutions of E333 is increased by 0.4–1.2 pH units, likely due to repositioning of the cofactor and modification of the pK_a of the pyridinium nitrogen. The pH profile of yCGL-E48A/E333A resembles that of Escherichia coli cystathionine β-lyase. The effect of substituting E48, E333 or both residues is the 1.3–3, 26–58 and 124–568-fold reduction, respectively, of the catalytic efficiency of l-Cth hydrolysis. The K_m^l-Cth of E333 substitution variants is increased ~ 17-fold, while K_m^l-OAS is within 2.5-fold of the wild-type enzyme, indicating that residue E333 interacts with the distal amine moiety of l-Cth, which is not present in the alternative substrate O-acetyl-l-serine. The catalytic efficiency of yCGL for α,γ-elimination of O-succinyl-l-homoserine (k_cat/K_m^l-OSHS = 7 ± 2), which possesses a distal carboxylate, but lacks an amino group, is 300-fold lower than that of the physiological l-Cth substrate (k_cat/K_m^l-Cth = 2100 ± 100) and 260-fold higher than that of l-Hcys (k_cat/K_m^l-Hcys = 0.027 ± 0.005), which lacks both distal polar moieties. The results of this study suggest that the glutamate residue at position 333 is a determinant of specificity.     

Triose phosphate isomerase from the blood fluke Schistosoma mansoni: Biochemical characterisation of a potential drug and vaccine target

The glycolytic enzyme triose phosphate isomerase from Schistosoma mansoni is a potential target for drugs and vaccines. Molecular modelling of the enzyme predicted that a Ser-Ala-Asp motif which is believed to be a helminth-specific epitope is exposed. The enzyme is dimeric (as judged by gel filtration and cross-linking), resistant to proteolysis and highly stable to thermal denaturation (melting temperature of 82.0 °C). The steady-state kinetic parameters are high (K_m for dihydroxyacetone phosphate is 0.51 mM; K_m for glyceraldehyde 3-phosphate is 1.1 mM; k_cat for dihydroxyacetone phosphate is 7800 s⁻¹ and k_cat for glyceraldehyde 3-phosphate is 6.9 s⁻¹).