Fundamental aspects of antimony thin film electrodes for pH measurement.

This report concerns the investigation of the sensitivity, temperature dependence, accuracy, and the standard electrode potential EO of an antimony thin film pH electrode which was prepared with electron beam evaporation techniques. The air-formed oxide film on antimony thin film electrodes has been proved by both the cathodic reduction method and electron spectroscopy for chemical analysis (ESCA). The antimony thin film electrode responded rapidly to pH changes and its sensitivity was slightly changed depending on the buffer composition. The accuracy of this electrode was compared with that of the glass electrode. Temperature had some influence on the function of this electrode. The standard electrode potential of this electrode was discussed together with that of other forms of antimony electrodes. The structure and thickness of the surface oxide on antimony thin film electrodes was confirmed by cathodic reduction and ESCA. It was clear that the surface oxide governs the electrode reactions. Possible applications of the antimony thin film electrode are discussed stating some limitations in the use.     

pH Measurements of Agar Culture Media by Using a Flat-Bottom Electrode

A new design, flat-bottom combination pH electrode was evaluated for utility in determining the pH of prepared agar media by surface contact of the electrode with the agar media.     

Nano nickel oxide/nickel incorporated nickel composite coating for sensing and estimation of acetylcholine

Pure nickel electrodes can be used as biosensors especially for sensing and estimating acetylcholine neurotransmitter. In the present work, a good electrochemical sensor was developed by electroplating nano nickel oxide reinforced nickel on graphite substrate. The morphology of the working electrode surface was studied by using a scanning electron microscope (SEM). The electrochemical and biological performance of the modified electrode was characterized by polarization studies in different media. The present modified electrode showed good sensing performance with a response time as low as 8s during sensing and estimation of acetylcholine. The sensitivity of the modified electrode was 34.88 microA/(microM cm(2)).     

An antimony-silver/silver chloride electrode system for measuring pH in insect gut contents

An electrode system consisting of a cast antimony rod with a silver chloride-coated wire as a reference electrode has been developed to measure pH in insect gut contents. The electrode works well with buffer volumes down to 0.1 μl. Response to pH is linear between pH 4 and 11 and equates to a change of 52.3 mV per pH unit at 18–20°C. Electrical resistance is low (0.25 MΩ), so the electrode can be used with low-impedance meters and does not require shielding from induced currents. Its useful range lies between redox potentials −330 mV (pH 7) and +297 mV to 350 mV, corresponding to a pe + pH range of 1.4 to about 10.8. This covers reported gut pH values for most insects so far examined. Consequently the electrode is suitable for measuring pH of gut contents from many insects that are too small to be analysed with current commercial electrodes.     

In vivo measurements of changes in pH triggered by oxalic acid in leaf tissue of transgenic oilseed rape

Oxalic acid (OA), a non-host-specific toxin secreted by Sclerotinia sclerotiorum during pathogenesis, has been demonstrated to be a major phytotoxic and pathogenic factor. Oxalate oxidase (OXO) is an enzyme associated with the detoxification of OA, and hence the introduction of an OXO gene into oilseed rape (Brassica napus L.) to break down OA may be an alternative way of increasing the resistance of the plant to Sclerotinia sclerotiorum. In order to investigate the activation of OXO in transgenic oilseed rape, a convenient and accessible method was used to monitor changes in pH in response to stress induced by OA. The pH sensor, a platinum microcylinder electrode modified using polyaniline film, exhibited a linear response within the pH range from 3 to 7, with a Nernst response slope of 70 mV/pH at room temperature. The linear correlation coefficient was 0.9979. Changes induced by OA in the pH values of leaf tissue of different oilseed rape species from Brassica napus L. were monitored in real time in vivo using this electrode. The results clearly showed that the transgenic oilseed rape was more resistant to OA than non-transgenic oilseed rape.     

Potentiometric determination of cysteine with thiol sensitive silver-mercury electrode

A potentiometric procedure for cysteine thiol group concentration monitoring in media generating free radicals was developed using a thiol specific silver-mercury electrode. Electrolytic deposition of mercury on a silver wire and treatment with 20 mM cysteine in 0.5 M NaOH were used to produce the electrode. A silver-chloride electrode in saturated KCl was the reference. A glass capillary with 1 M KNO3 in 1% agarose gel was the liquid junction. The electrode responded to cysteine concentration in the range from 0.01 to 20 mM yielding a perfect linear relationship for the dependence of log [cysteine] versus electrode potential [mV], with b0 (constant) = -373.43 [mV], b1 (slope) = -53.82 and correlation coefficient r2 = 0.97. The electrode potential change per decade of cysteine concentration was 57 mV. The minimal measurable signal response was at a cysteine concentration of 0.01 mM. The signal CV amounted to 4-6% for cysteine concentrations of 0.01 to 0.05 mM and to less than 1% for cysteine concentrations of 0.5 to 20 mM. The response time ranged from about 100 s for cysteine concentrations of 0.01 to 0.1 mM to 30 s at higher cysteine concentrations. The standard curve reproducibility was the best at cysteine concentrations from 0.1 to 20 mM. In a reaction medium containing cysteine and copper(II)-histidine complex ([His-Cu]2+) solution in 55 mM phosphate buffer pH 7.4 the electrode adequately responded to changes in cysteine concentration. Beside cysteine, the silver-mercury electrode responded also to thiol groups of homocysteine and glutathione, however, the Nernst equation slope was about half of that for cysteine.     

An Alternative Gelling Agent for Culture and Studies of Nematodes,Bacteria, Fungi,and Plant Tissues

Pluronic F127 polyol, a block copolymer of propylene oxide and ethylene oxide, was studied as an alternative to agar in culture media for nematodes, bacteria, fungi, actinomycetes, and plant tissues or seedlings, At a polyol concentration of 20% w/v, the culture media, semi-solid at room temperature (22 C) but liquid at lower temperatures, had minimal effects on the test organisms. Most of the fungi and bacteria grew as well in 20% polyol as in 1.5% agar media; however, various species of nematodes and plant seedlings or tissues exhibited differential sensitivities to different concentrations of the polyol. In cases where the organisms were unaffected, the polyol media had certain advantages over agar, including greater transparency and less contamination under nonaseptic conditions. Polyol media have potentially greater ease for recovery of embedded organisms or tissues inside the media by merely shifting to lower temperatures.     

Differential pH measurements of metabolic cellular activity in nl culture volumes using microfabricated iridium oxide electrodes

In this paper we describe a new approach to measure pH differences in microfluidic devices and demonstrated acidification rate measurements in on-chip cell culture systems with nl wells. We use two miniaturized identical iridium oxide (IrOx) thin film electrodes (20 micromx400 microm), one as a quasi-reference electrode, the other as a sensing electrode, placed in two confluent compartments on chip. The IrOx electrodes were deposited onto microfabricated platinum (Pt) electrodes simultaneously using electrodeposition. Incorporating the electrodes into a microfluidic device allowed us to expose each electrode to a different solution with a pH difference of one pH unit maintaining a confluent connection between the electrodes. In this configuration, we obtained a reproducible voltage difference between the two IrOx thin film electrodes, which corresponds to the electrode sensitivities of -70 mV/pH at 22 degrees C. In order to measure the acidification rate of cells in nl cell culture volumes we placed one IrOx thin film electrode in the perfusion channel as a quasi-reference electrode and the other in the cell culture volume. We obtained an acidification rate of 0.19+/-0.02 pH/min for fibroblast cells using a stop flow protocol. These results show that we can use two identical miniaturized microfabricated IrOx electrodes to measure pH differences to monitor the metabolic activity of cell cultures on chip. Furthermore, our approach can also be applied in biosensor or bioanalytical applications.     

Achieving desired plant growth regulator levels in liquid plant tissue culture media that include activated carbon

This paper is part of a series considering the impact of activated carbon (AC) on the composition of plant tissue culture media. Using liquid culture media for initiation of Norway spruce embryogenic tissue and eight different ACs, we present a method for achieving target plant growth regulator (PGR) levels in AC-containing medium based on sorption isotherms for individual PGRs. Linear relationships were found between PGR adsorption and specific BET (Brunauer, Emmett, Teller theory) surface area and specific total pore volume of AC. When using a new AC, this linear relationship allows one to achieve multiple PGR levels similar to historic levels through adjustment of the mass of AC based on its relative BET surface area or relative total pore volume. Target levels of PGRs and an initiation success similar to that in medium without AC were achieved with several different AC types when AC mass was adjusted on the basis of pore volume.     

Immobilization of creatininase, creatinase and sarcosine oxidase on iron oxide nanoparticles/chitosan-g-polyaniline modified Pt electrode for detection of creatinine

Commercial enzymes, creatininase (CA) from Pseudomonas sp, creatinase (CI) from Pseudomonas sp, sarcosine oxidase (SO) from Bacillus sp were co-immobilized onto iron oxide nanoparticles/chitosan-graft-polyaniline (Fe(3)O(4)-NPs/CHIT-g-PANI) composite film electrodeposited on surface of Pt electrode through glutaraldehyde coupling. Transmission electron microscopy (TEM) was used for characterization of Fe(3)O(4)-NPs. A creatinine biosensor was fabricated using Enzymes/Fe(3)O(4)-NPs/CHIT-g-PANI/Pt electrode as working electrode, Ag/AgCl as reference electrode and Pt wire as auxiliary electrode. The enzyme electrode was characterized by cyclic voltammetry (CV), scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopic and electrochemical impedance spectroscopy (EIS). The biosensor exhibited an optimum response within 2s at pH 7.5 and 30 °C, when polarized at 0.4V vs Ag/AgCl. The electrocatalytic response showed a linear dependence on creatinine concentration ranging from 1 to 800 μM. The sensitivity of the biosensor was 3.9 μA μM(-1) cm(-2), with a detection limit of 1 μM (S/N=3). Apparent Michaelis-Menton (K(m)) value for creatinine was 0.17 mM. The biosensor showed only 10% loss in its initial response after 120 uses over 200 days, when stored at 4 °C. The biosensor measured creatinine in the serum of apparently healthy persons which correlated well with a standard colorimetric method (r=0.99).     

A simple screening protocol for the identification of quorum signal antagonists

Quorum sensing (QS) is a mechanism by which diverse microorganisms can control specific processes in response to population density. A relatively well-known form of QS among Proteobacteria involves production and subsequent response to acylated homoserine lactones (AHLs). Quorum sensing inhibition (QSI), targeting AHL-dependent signaling, has been reported as a strategy for the control of biofilm formation used by several marine organisms. We developed a simple soft agar overlay protocol, based on pigmentation inhibition, to rapidly screen for the presence of potential QSI by bacteria and plants. For bacterial screens, test organisms are first streaked onto their appropriate media and incubated overnight. For plant screens, the plant material (leaf, stem, flower, etc.) is placed onto LB agar. The bacterial growth or plant samples are then covered with an overlay of LB soft agar containing an inoculum of either Pseudomonas aureofaciens 30-84 or Chromobacterium violaceum ATCC 12472 (indicator cultures) and then incubated overnight. These indicator bacteria regulate pigment production by N-hexanoyl-HSL (C6-HSL) QS and are readily inhibited by AHL analogues and other antagonists. QSI is indicated by the lack of pigment production of the indicator culture in the vicinity of the test sample. Growth inhibition of the indicator culture indicates possible antibiotic production. Two different biosensor organisms based on derivatives of Agrobacterium tumefaciens and C. violaceum, capable of detecting a range of AHLs were used to determine whether QSI is due to the production of interfering AHLs competing with the C6-HSL regulation of C. violaceum and P. aureofaciens pigment production. This simple protocol will facilitate the screening of multiple organisms for the production of potential antifouling compounds.     

Application of antimony microelectrodes to intracellular pH monitoring

Some novel studies of the properties of the antimony microelectrode used for intracellular pH measurements are described. First, it is shown that currents in the picoampere range, such as those encountered as leakage in some electrometers, induce important changes in pH sensitivity. The response time of the electrode has also been measured and indicates that the electrode exhibits a rapid time course which would be very useful for dynamic cytoplasmic pH investigations. An example of internal pH recording during cellular acidification in Xenopus laevis oocyte is also presented.     

Thin-film IrOx pH microelectrode for microfluidic-based microsystems

Microsensors are valuable tools to monitor cell metabolism in cell culture volumes. The present research describes the fabrication and characterization of on-chip thin-film iridium oxide pH microsensors with dimensions of 20 microm x 20 microm and 20 microm x 40 microm suitable to be incorporated into nl volumes. IrOx thin films were formed on platinum microelectrodes by electrochemical deposition in galvanostatic mode. Anodically grown iridium oxide films showed a near super-Nernstian response with a slope of -77.6+/-2 mV/pH at 22 degrees C, and linear responses within the pH range of 4-11. Freshly deposited electrodes showed response times as low as 6s. Long-term studies showed a baseline drift of 2-3 mV/month, which could easily be compensated by calibration. This work demonstrated for the first time the use of planar IrOx pH microelectrodes to measure the acidification rate of CHO and fibroblast cells in an on chip cell culture volume of 25 nl with microfluidic control.     

微生物培养基质量控制技术和标准

微生物培养基的酸碱度、凝胶强度和选择性等直接影响到培养基的质量,在理化试验方法中采用连接可渗透陶器型液体接头的电极和平头电极或者连接微型探头的电极可分别测定液体和固体培养基的pH值,而采用Gelometer和the LFRA Texture Analyser可测定固体培养基的凝胶强度。在微生物学方法中固体培养基采用倾注平板法、涂布法、划线法（半定量法）、改良的Miles-Misra法等测定生长情况,液体培养基采用稀释法测定生长率,用目标菌和杂菌的混合菌株评价选择性增菌培养基的选择性,利用OD值评价液体培养基生长率等。ICFMH（国际食品微生物学和卫生学委员会培养基工作组）、ISO、FDA以及我国卫生部等相继制定了培养基质量控制的标准,但目前还没有一个系统的适合我国国情的培养基质量控制国家标准,以致各相关单位采用的标准不一致,所以制定培养基质量控制国家标准非常关键。     

Effect of Method of Agar Addition on Post-autoclave pH of the Tissue Culture Media

Tissue culture media (MS, GB-5 and N6) were gelled with agarby employing different methods When agar was dissolved directlyin media by autoclaving at 120 °C for 1 mm followed by sterilization,the media pH dropped markedly — more so at the lower concentrationsof agar On the other hand, when agar was first dissolved indistilled water and added to the culture media the pH loss wasminimized considerably pH measurements carried out as a functionof time showed a gradual decline in media pH The media supplementedwith Panax ginseng callus became more acidic than the mediawith no callus Tentative reasons for the post autoclave pH fallassociated with various methods of agar addition are described Culture media, agar addition, post-autoclave pH, Panax gingseng     

Determination of catalase-like activity in plants based on the amperometric monitoring of hydrogen peroxide consumption using a carbon paste electrode modified with ruthenium(IV) Oxide

A carbon paste electrode containing ruthenium(IV) oxide as a modifier was tested as an effective hydrogen peroxide amperometric sensor in bulk measurements (hydrodynamic amperometry). Factors that influence its overall analytical perform ance, such as pH and the applied potential, were examined. The RuO2-modified electrode displayed high sensitivity towards hydrogen peroxide, with detection limits as low as 0.02 mm at pH 7.4 and 0.007 mM at pH 9.0. The method was applied for monitoring the decomposition of hydrogen peroxide (by catalase) in phosphate buffer of pH 7.4. The relative response of the electrode towards ascorbic acid was assessed and it was found that the selectivity of the RuO2-modified electrode towards hydrogen peroxide over ascorbic acid could be significantly improved by electro-polymerizing m-phenylenediamine on its surface prior to measurements. The RuO2-modified electrode was used for the kinetic (fixed time) determination of catalase activity in the range of 4-40 U/mL (detection limit 1.2 U/mL). The method was applied to the determination of catalase-like activity in various plant materials (recov-ery ranged from 93 to 101%, detection limit 480 U/100 g).     

Effects of common components on hardness of culture media prepared with gelrite™

Summary Tissue cultures on properly solidified Gelrite media generally showed superior shoot proliferation and rooting, as well as shoot and root vigor and callus development to those on TC agar. Vitrification, or hyperhydricity, was observed in both Gelrite and agar media and minimized by increasing the gel concentrations. Rigidity of Gelrite media depended on combined levels of MS macrosalts, basal nutrient formulations, sucrose concentration, pH, and Gelrite concentration. Most MS macrosalts increased hardness of Gelrite gels; NH₄NO₃ had a decreasing effect. Rigidity of TC agar gels increased with reductions of MS macrosalts. A slightly softer Gelrite medium resulted when sucrose was excluded. Both Gelrite and agar media were softer at lower pHs and harder at higher pHs. Activated charcoal and mannitol increased gel hardness, and more noticeably of agar gels. NaCl addenda reduced rigidity, with their effects being more pronounced on Gelrite than on agar gels. Gelrite is a trademark of Kelco Division of Merck & Co. (San Diego, CA), manufacturer of the gellan gum. Phytagel is a trademark of Sigma Chemical Co. (St. Louis, MO) for repackaged Gelrite. TC agar used for comparisons in this investigation is plant tissue culture tested agar obtained from JRH Biosciences (Lenexa, KS).     

Highly sensitive sensor for picomolar detection of insulin at physiological pH, using GC electrode modified with guanine and electrodeposited nickel oxide nanoparticles

The electrochemical behavior of insulin at glassy carbon (GC) electrode modified with nickel oxide nanoparticles and guanine was investigated. Cyclic voltammetry technique has been used for electrodeposition of nickel oxide nanoparticles (NiOx) and immobilization of guanine on the surface GC electrode. In comparison to glassy carbon electrode modified with nickel oxide nanoparticles and bare GC electrode modified with adsorbed guanine, the guanine/nickel oxide nanoparticles/modified GC electrode exhibited excellent catalytic activity for the oxidation of insulin in physiological pH solutions at reduced overpotential. The modified electrode was applied for insulin detection using cyclic voltammetry or hydrodynamic amperometry techniques. It was found that the calibration curve was linear up to 4muM with a detection limit of 22pM and sensitivity of 100.9pA/pM under the optimized condition for hydrodynamic amperometry using a rotating disk modified electrode. In comparison to other electrochemical insulin sensors, this sensor shows many advantages such as simple preparation method without using any special electron transfer mediator or specific reagent, high sensitivity, excellent catalytic activity at physiological pH values, short response time, long-term stability and remarkable antifouling property toward insulin and its oxidation product. Additionally, it is promising for the monitoring of insulin in chromatographic effluents.     

Direct electrochemistry and electrocatalytic activity of catalase immobilized onto electrodeposited nano-scale islands of nickel oxide

Cyclic voltammetry was used for simultaneous formation and immobilization of nickel oxide nano-scale islands and catalase on glassy carbon electrode. Electrodeposited nickel oxide may be a promising material for enzyme immobilization owing to its high biocompatibility and large surface. The catalase films assembled on nickel oxide exhibited a pair of well defined, stable and nearly reversible CV peaks at about -0.05 V vs. SCE at pH 7, characteristic of the heme Fe (III)/Fe (II) redox couple. The formal potential of catalase in nickel oxide film were linearly varied in the range 1-12 with slope of 58.426 mV/pH, indicating that the electron transfer is accompanied by single proton transportation. The electron transfer between catalase and electrode surface, (k(s)) of 3.7(+/-0.1) s(-1) was greatly facilitated in the microenvironment of nickel oxide film. The electrocatalytic reduction of hydrogen peroxide at glassy carbon electrode modified with nickel oxide nano-scale islands and catalase enzyme has been studied. The embedded catalase in NiO nanoparticles showed excellent electrocatalytic activity toward hydrogen peroxide reduction. Also the modified rotating disk electrode shows good analytical performance for amperometric determination of hydrogen peroxide. The resultant catalase/nickel oxide modified glassy carbon electrodes exhibited fast amperometric response (within 2 s) to hydrogen peroxide reduction (with a linear range from 1 microM to 1 mM), excellent stability, long term life and good reproducibility. The apparent Michaelis-Menten constant is calculated to be 0.96(+/-0.05)mM, which shows a large catalytic activity of catalase in the nickel oxide film toward hydrogen peroxide. The excellent electrochemical reversibility of redox couple, high stability, technical simplicity, lake of need for mediators and short preparations times are advantages of this electrode. Finally the activity of biosensor for nitrite reduction was also investigated.     

草莓炭疽病生防菌株MT-06的鉴定及生物学特性

对草莓炭疽病具有良好生防效果的菌株MT-06的抑菌谱、生物学特性及其分类地位进行了研究。结果表明:MT-06具有广谱抗菌性,对多种病原菌具有拮抗作用;其营养生长的最适条件是:在PDA或PSA培养基上,28-35℃,初始pH为5,24h全光照;在查氏培养基上,25-28℃,24h全光照条件下孢子产量最高。经形态观察和rDNA-ITS序列及β-tubulin序列分析,将该菌株鉴定为Talaromyces flavus(Klcker)Stolk Samson。