Efficient plasmid transformation of the beta-lactam producer Streptomyces clavuligerus.

The conditions for optimal formation and regeneration of protoplasts of Streptomyces clavuligerus were established. The optimal temperature for regeneration of protoplasts and for transformation was 26 degrees C in three different regeneration media. The best efficiency of transformation was obtained with 40% polyethylene glycol 1000. The efficiencies of regeneration and transformation increased greatly when protoplasts were obtained from cultures in the early stationary phase of growth. The number of transformants per assay increased linearly with rising concentrations of protoplasts. However, the number of transformants per protoplast decreased at concentrations of protoplasts above 1.5 X 10(9). The total number of transformants rose linearly at increasing plasmid DNA concentrations, but the number of the transformants per microgram of DNA became constant at concentrations above 1 microgram of DNA. Transformation frequencies as high as 5 X 10(5) transformants per microgram of DNA were obtained when plasmid pIJ702 was isolated from S. clavuligerus but not when isolated from Streptomyces lividans.     

Efficient plasmid transformation of the beta-lactam producer Streptomyces clavuligerus

The conditions for optimal formation and regeneration of protoplasts of Streptomyces clavuligerus were established. The optimal temperature for regeneration of protoplasts and for transformation was 26 degrees C in three different regeneration media. The best efficiency of transformation was obtained with 40% polyethylene glycol 1000. The efficiencies of regeneration and transformation increased greatly when protoplasts were obtained from cultures in the early stationary phase of growth. The number of transformants per assay increased linearly with rising concentrations of protoplasts. However, the number of transformants per protoplast decreased at concentrations of protoplasts above 1.5 X 10(9). The total number of transformants rose linearly at increasing plasmid DNA concentrations, but the number of the transformants per microgram of DNA became constant at concentrations above 1 microgram of DNA. Transformation frequencies as high as 5 X 10(5) transformants per microgram of DNA were obtained when plasmid pIJ702 was isolated from S. clavuligerus but not when isolated from Streptomyces lividans.     

Plasmid transformation of Streptomyces tendae after heat attenuation of restriction.

Streptomyces tendae ATCC 31160 produces nikkomycin, a fungicide and insecticide that inhibits chitin synthases. Exposure of S. tendae protoplasts to 50 degrees C for 30 min is required for transformation (10(2) thiostrepton-resistant transformants micrograms of DNA-1) with plasmid pIJ702 or pIJ680 from Streptomyces lividans. pIJ702 and pIJ680 DNA isolated from the S. tendae transformants is efficient (10(6) to 10(7) transformants micrograms of DNA-1) in subsequent transformations of S. tendae protoplasts generated at 30 degrees C. PstI fails to cut the single PstI site in pIJ702 and cuts only one of the two PstI sites in pIJ680 DNA isolated from S. tendae transformants. Digests of plasmid DNA mixtures showed that plasmid DNA from S. tendae does not inhibit PstI activity. pIJ702 and pIJ680 DNA from S. tendae transformants was used to transform S. lividans to show that plasmid DNA remains unchanged, except for modification at some PstI sites in S. tendae, as a consequence of passage through S. tendae. The DNA modification is lost when S. lividans is transformed with plasmid DNA from S. tendae transformants. Since S. tendae modifies only some PstI sites, it appears the modification (presumably restriction activity also) activity in S. tendae recognizes a sequence that includes or overlaps the PstI hexanucleotide recognition sequence.     

Plasmid transformation of Streptomyces tendae after heat attenuation of restriction

Streptomyces tendae ATCC 31160 produces nikkomycin, a fungicide and insecticide that inhibits chitin synthases. Exposure of S. tendae protoplasts to 50 degrees C for 30 min is required for transformation (10(2) thiostrepton-resistant transformants micrograms of DNA-1) with plasmid pIJ702 or pIJ680 from Streptomyces lividans. pIJ702 and pIJ680 DNA isolated from the S. tendae transformants is efficient (10(6) to 10(7) transformants micrograms of DNA-1) in subsequent transformations of S. tendae protoplasts generated at 30 degrees C. PstI fails to cut the single PstI site in pIJ702 and cuts only one of the two PstI sites in pIJ680 DNA isolated from S. tendae transformants. Digests of plasmid DNA mixtures showed that plasmid DNA from S. tendae does not inhibit PstI activity. pIJ702 and pIJ680 DNA from S. tendae transformants was used to transform S. lividans to show that plasmid DNA remains unchanged, except for modification at some PstI sites in S. tendae, as a consequence of passage through S. tendae. The DNA modification is lost when S. lividans is transformed with plasmid DNA from S. tendae transformants. Since S. tendae modifies only some PstI sites, it appears the modification (presumably restriction activity also) activity in S. tendae recognizes a sequence that includes or overlaps the PstI hexanucleotide recognition sequence.     

High frequency transformation of Streptomyces niveus protoplasts by plasmid DNA.

A procedure has been developed for transforming protoplasts of the novobiocin producing strain Streptomyces niveus at high frequency. This required the isolation of strains LH13 and LH20 defective in DNA restriction from the wild type (ATCC 19793) which is transformed at very low frequencies. The LH13 and LH20 derivatives were obtained by curing pIJ702 DNA from the few S. niveus transformed protoplasts obtained by transformation of the wild type with high concentrations of pIJ702 DNA. Protoplasts of S. niveus strains LH13 and LH20 produced about 10(6) transformants/micrograms DNA with modified pIJ702 DNA derived by replication in S. niveus. Unmodified DNA (derived from replication in S: lividans) from a series of pIJ101, SCP2 and pSN2-based derivatives, gave transformation frequencies in the range of 10(2)-10(3) transformants/micrograms DNA. Optimal conditions for the formation and transformation of S. niveus protoplasts are described.     

High frequency transformation of Streptomyces niveus protoplasts by plasmid DNA

H.A. HUSSAIN AND D.A. RITCHIE. 1991. A procedure has been developed for transforming protoplasts of the novobiocin producing strain Streptomyces niveus at high frequency. This required the isolation of strains LH13 and LH20 defective in DNA restriction from the wild type (ATCC 19793) which is transformed at very low frequencies. The LH13 and LH20 derivatives were obtained by curing pIJ702 DNA from the few S. niveus transformed protoplasts obtained by transformation of the wild type with high concentrations of pIJ702 DNA. Protoplasts of S. niveus strains LH13 and LH20 produced about 10⁶ transformants/μg DNA with modified pIJ702 DNA derived by replication in S. niveus. Unmodified DNA (derived from replication in S. lividans ) from a series of pIJ101, SCP2 and pSN2-based derivatives, gave transformation frequencies in the range of 10²-10³ transformants/μg DNA. Optimal conditions for the formation and transformation of S. niveus protoplasts are described.     

黑暗链霉菌DNA转移系统的建立

研究了黑暗链霉菌的基因转移系统,探索了通过PEG介导的原生质体转化、接合转移向黑暗链霉菌中转入外源DNA的可能性。多次尝试用质粒pIJ702转化黑暗链霉菌9904原生质体均未成功。对原生质体进行“热处理”后转化、利用单链DNA转化等都不能将质粒导入黑暗链霉菌中,表明黑暗链霉菌对外源DNA有很强的限制修饰作用。利用接合转移将具有oriT的大肠杆菌链霉菌穿梭质粒pHZ132转入大肠杆菌ET12567(pUZ8002)中,获得供体菌ET12567(pUZ8002,pHZ132)。将供体菌与预萌发的黑暗链霉菌9904的孢子进行接合转移,成功地将pHZ132转入黑暗链霉菌9904中。质粒pHZ132经黑暗链霉菌自身修饰后也可转入黑暗链霉菌9904菌株的原生质体中,转化率约为103/μg DNA(pHZ132)。     

Genetic transformation of Chainia and heat attenuation of its restriction system.

A PEG-mediated transformation system for Chainia (NCL 82-5-1) was developed using a broad host range Streptomyces vector, pIJ702. Protoplasts prepared from Chainia (NCL 82-5-1) were regenerated with 5% efficiency. Transformation of the protoplasts with pIJ702 gave 10-20 transformants/micrograms DNA. The low efficiency of transformation is attributed to a restriction system in Chainia; this could be inhibited by treating the protoplasts at 42 degrees C for 10 min just before transformation. The yield of transformants increased 100-fold when pIJ702 was modified by passage in Chainia. Because the plasmid replicon was functional in Chainia and the modified plasmid was stably maintained, the transformation system should be useful for self-cloning in Chainia NCL 82-5-1 of the many commercially important enzymes this strain is known to produce.     

Transformation of Streptomyces bambergiensis S712 by plasmid DNA

Optimal conditions for protoplast formation in the moenomycin-producing strain S712 of S. bambergiensis were developed. The protoplasts of this strain were transformed with DNA of plasmids pVG101 and pIJ350. The plasmids isolated from the transformants and designated as pVG101SB and pIJ350SB respectively were used for transformation of the initial culture protoplasts. No significant increase in the transformation efficiency was observed. Studies with the plasmid retransformation from S. bambergiensis S712 to S. lividans 66 and vice verse were conducted. Limitation of the plasmid replication during the retransformation in these strains was not detected. Partial restriction analysis of plasmids pVG101 and pVG101SB as well as pIJ350 and pIJ350SB showed that the used restriction enzymes had the same effect on the respective plasmids. Genetic stability of the plasmids in S. bambergiensis S712 was studied. It is concluded that plasmids pVG101 and pIJ350 can be used as vector molecules for this strain.     

Transformation and transfection of anthracycline-producing streptomycetes.

Streptomyces peucetius and Streptomyces strain C5, producers or anthracycline antibiotics, were converted to protoplasts from vegetatively growing mycelia. Conditions are described for maximal protoplast formation (greater than 99%) and for regeneration frequencies of up to 13%. Streptomycete plasmids pIJ61, pIJ702, and pIJ922, from the replicons SLP1, pIJ101, and SCP2, respectively, were isolated from Streptomyces lividans 66 and successfully introduced into S. peucetius and Streptomyces strain C5 by polyethylene glycol-mediated protoplast transformation. Frequencies of up to 10(6) transformations X microgram of plasmid DNA-1 were achieved by these procedures. Analyses showed that the two anthracycline-producing strains can stably harbor the plasmids without deletion of plasmid sequences or loss of the plasmids for several transfers through selective media. Fragments of DNA from S. peucetius ligated into pIJ702 and introduced into Streptomyces strain C5 were stable after several transfers through selective media. Both anthracycline producers also were sensitive to infection and transfection by actinophages KC401 and KC515, clear plaque derivatives of bacteriophage phi C31. Optimal conditions were determined for the transfection of S. peucetius and Streptomyces strain C5 protoplasts with phi C31 KC401 and KC515 DNA with liposome-assisted, polyethylene glycol-mediated protoplast transfection.     

Transformation and transfection of anthracycline-producing streptomycetes

Streptomyces peucetius and Streptomyces strain C5, producers or anthracycline antibiotics, were converted to protoplasts from vegetatively growing mycelia. Conditions are described for maximal protoplast formation (greater than 99%) and for regeneration frequencies of up to 13%. Streptomycete plasmids pIJ61, pIJ702, and pIJ922, from the replicons SLP1, pIJ101, and SCP2, respectively, were isolated from Streptomyces lividans 66 and successfully introduced into S. peucetius and Streptomyces strain C5 by polyethylene glycol-mediated protoplast transformation. Frequencies of up to 10(6) transformations X microgram of plasmid DNA-1 were achieved by these procedures. Analyses showed that the two anthracycline-producing strains can stably harbor the plasmids without deletion of plasmid sequences or loss of the plasmids for several transfers through selective media. Fragments of DNA from S. peucetius ligated into pIJ702 and introduced into Streptomyces strain C5 were stable after several transfers through selective media. Both anthracycline producers also were sensitive to infection and transfection by actinophages KC401 and KC515, clear plaque derivatives of bacteriophage phi C31. Optimal conditions were determined for the transfection of S. peucetius and Streptomyces strain C5 protoplasts with phi C31 KC401 and KC515 DNA with liposome-assisted, polyethylene glycol-mediated protoplast transfection.     

林可链霉菌转化系统的建立

利用基因工程技术改良抗生素生产菌有着广阔的应用前景［１］。值得尝试的是将抗生素生物合成基因片段随机或定向组合导入生产菌中,通过同源重组方式提高生物合成途径中限速步骤相关基因的剂量,以达到提高生产菌发酵单位的目的。此战略被作者称为“基因回转化技术”,并...     

Plasmid transformation of Streptomyces venezuelae: modified procedures used to introduce the gene(s) for p-aminobenzoate synthase

Sucrose was unsuitable as an osmotic stabilizer in buffer solutions and media used for transformation of Streptomyces venezuelae ISP5230. Its replacement with NaCl, together with other modifications in the procedure, allowed efficient formation and regeneration of protoplasts but did not support transformation of S. venezuelae ISP5230 by vectors pIJ41 and pIJ941. With pIJ702, transformants with a low plasmid-copy-number and altered growth characteristics were obtained. Both pIJ702 and pIJ941, but not pIJ41, transformed S. venezuelae 13s; when pIJ941 was used, the plasmid in 18 of 20 transformants contained a deletion in the region reported to code for replication and transfer. The modified plasmid transformed S. venezuelae ISP5230 efficiently and was used to introduce a fragment of DNA from the pab locus of the wild-type into a Cml-1 mutant of ISP5230 blocked in chloramphenicol formation. Transformants that overproduced p-aminobenzoic acid were obtained but they remained blocked in chloramphenicol production; thus, the cloned pab fragment did not contain genes able to complement the cml-1 mutation. The results also suggest that the Cml-1 phenotype is not due to a defective reaction common to the biosynthesis of p-aminobenzoic acid and chloramphenicol.     

Efficient transformation of Amycolatopsis orientalis (Nocardia orientalis) protoplasts by Streptomyces plasmids.

Conditions for efficient transformation of Amycolatopsis orientalis (Nocardia orientalis) protoplasts by Streptomyces plasmid cloning vectors were identified. Three streptomycete plasmid origins of replication function in A. orientalis, as do the apramycin resistance gene from Escherichia coli, the thiostrepton resistance gene from Streptomyces azureus, and the tyrosinase gene from Streptomyces antibioticus. A. orientalis appears to express some restriction and modification, because highest transformation frequencies (10(6)/micrograms of DNA) were obtained when plasmid pIJ702 was modified by passage in A. orientalis.     

Development of Chainia as a host for xylanase gene cloning : Evidence for occurrence of a restriction-modification system

Summary Conditions for genetic transformation of the xylanase-negative (X^–) strain of Chainia with pIJ 702 were optimized. The growth of Chainia at 30°C for 36 – 40 h and addition of geletin (1%) to the medium resulted in the maximum yield of protoplasts and regeneration efficiency. Poor transformation efficiency of Chainia (X^–) protoplasts by native pIJ 702 versus improved efficiency (16 transformants ug^–1 of plasmid DNA) by prior heating of protoplasts at 42°C for 10 min suggests the occurrence of a restriction system in Chainia. Increased transformation efficiency by passage of the plasmid through Chainia together with the altered methylation status of the transformant plasmid presents evidence for the existence of an operative modification system in Chainia. Development of thiostrepton resistance and formation of me1amin pigment in Chainia (X^–) by transformation with pIJ 702 reveal that genes from Streptomyces can be functionally expressed by Chainia (X^–).(NCL Communication No. 6207)     

Protoplasts of lincomycin producer Streptomyces roseolus in genetic manipulations]

Protoplasts of commercial strain No. 1 of Streptomyces roseolus producing lincomycin were prepared. Conditions for protoplast storage and regeneration were defined. The protoplasts of strain No. 1 mutants marked by the rifampicin and thiostrepton resistance and the ability to synthesize melanin pigments were fused. Genetic analysis of the recombinants was performed. Systems for transformation of S. roseolus protoplasts by plasmid DNAs were developed. Efficiency of transformation by pIJ702, pIJ61, pVG101 and pBG3 and stability of the transformants were shown.     

Transformation ofStreptomyces lincolnensis protoplasts with plasmid vectors

A method for the preparation and regeneration of protoplasts of Streptomyces lincolnensis is described. Mycelium in the early exponential phase appeared to be most suitable for this purpose and yielded up to 25% regenerated intact cells. Transformation of S. lincolnensis protoplasts was achieved using broad-host-range streptomycete plasmid vectors pIJ622, pMP66, pRS410 and pIJ943 constructed from replicons pIJ101, pSLG33 and SCP2. The efficiency of transformation was 3.10(3) transformants per micrograms plasmid DNA when (2-5).10(7) recipient protoplasts were used. Interspecific transformations showed that there is no efficient restriction system in S. lincolnensis that would limit the transfer of genetic information from S. lividans or E. coli.     

Transformation ofStreptomyces granaticolor with natural and recombinant plasmid vectors

Protoplasts of Streptomyces granaticolor were found to be transformable by the broad-host-range plasmid pIJ350 but no transformants were detected when the narrow-host-range plasmid pIJ2 or the shuttle vector pPM66 (pIJ350--pBR322) isolated from E. coli cells were used. The onset of blue colour granaticin production by S. granaticolor cells was used as a marker to prepare protoplasts with a high transformation capacity. The presence of a restriction system is discussed.     

Transfer of conjugative plasmids and mobilization of a nonconjugative plasmid between Streptomyces strains on agar and in soil.

The conjugative plasmid pIJ101 and its conjugative nondeletion derivatives pIJ303 and pIJ211 were tested for their transferability between strains of Streptomyces on laboratory media and in the soil environment. Their roles in the mobilization of the cloning vector plasmid pIJ702, a nonconjugative deletion derivative of pIJ101, were also examined. Biparental and triparental crosses were performed on agar slants and in sterile soil between the plasmid donor Streptomyces lividans and several recipient Streptomyces strains previously isolated from soil. Conjugative plasmids were transferred to seven recipients in slant crosses and to three recipients in soil. Plasmids isolated from recipients showed restriction fragment patterns identical to that of the original plasmid in S. lividans. Plasmid pIJ303 was transferred less frequently in soil than on slants, and the frequency of transfer was higher at 30 degrees C than at the other temperatures examined. Transconjugant Streptomyces strains differed in their ability to maintain pIJ303. The nonconjugative plasmid pIJ702 was mobilized on agar slants into S. coelicolor 2708, which already contains a self-transmissible plasmid. Plasmid pIJ702 was also mobilized into S. flavovirens, Streptomyces sp. strain 87A, and S. parvulus on slants and in sterile soil after triparental crosses with two donors, one containing pIJ702 and the other containing either pIJ101 or pIJ211. The presence of a conjugative plasmid donor was required for the transfer of pIJ702 to S. parvulus 1234, S. flavovirens 28, and Streptomyces sp. strain 87A. Plasmid pIJ702 was always transferred in its normal, autonomous form. Chromosomal recombination also occurred in transconjugants after the transfer of pIJ702. This is the first report of gene transfer between Streptomyces strains in soil.     

Improvement of transformation and electroduction in avermectin high-producer,<Emphasis Type="Italic">Streptomyces avermitilis</Emphasis>

Factors affecting the PEG-mediated transformation and electrotransformation of Streptomyces avermitilis protoplasts, an industrial avermectin high-producer, were evaluated. The maximum protoplast transformation efficiency under optimum conditions with PEG was 3 x 106 transformants per microg plasmid pIJ702 DNA. The efficiency of electrotransformation with the same plasmid the intact cells grown in medium with 0.5 mmol/L CaCl2, suspended in buffer with 0.5 mol/L sucrose +1 mmol/L MgCl2, and pulsed at an electric field strength of 10 kV/cm, 800 ohms, 25 microF, was of 2 x 10(3) transformants per microg DNA. When the cells were electroporated after mild lysozyme-treatment, the efficiency was up to 10(4) transformants per microg DNA. Electroporation of protoplasts and germlings had a lower efficiency (10(2) transformants per microg DNA). We report that electroporation under optimum conditions can be used for direct transfer of nonconjugative plasmid pIJ699 between two different Streptomyces species, S. avermitilis and S. lividans.