In vitro embryotoxicity of a series of para-substituted phenols: structure, activity, and correlation with in vivo data.

The embryotoxicity of phenol and twelve para-substituted congeners on mid-gestation rat embryos was evaluated in vitro. Through application of correlative procedures and stepwise regression, equations describing the relationship between physical-chemical properties and various measures of activity were developed. Embryotoxicity was quantified by the log of the reciprocal of the potency estimates for reduction in selected growth parameters and induction of four morphological defects. In general, co-cultured hepatocytes ameliorated embryotoxicity; only phenol-induced embryotoxicity was enhanced by the presence of hepatocytes. In the absence of hepatocytes, measures of growth retardation were positively correlated with molar refractivity of the phenols. With hepatocytes, lipophilicity became important for describing the potential to induce growth deficits. The structural defects had varying correlation patterns in both culture systems. Potencies of these congeners in vitro were also compared to maternal and developmental potencies observed in vivo (Kavlock, Teratology, 41:43-59, '90). Two of the congeners were very toxic in both systems. For the remaining congeners, one maternal toxicity measure was found to be positively correlated with embryotoxicity for growth and development in vitro without hepatocytes. With hepatocytes, a broad spectrum of correlations, both positive and negative, were observed between in vivo developmental toxicity endpoints and in vitro embryotoxicity. Data from preliminary dosimetry studies suggest that phenol congeners may accumulate in embryos exposed in vitro more readily than with in vivo exposure. Potency calculations based on dosimetry information may demonstrate better correlations between data and allow additional relationships between chemical structure and activity to be developed.     

Fixation of molecular tritium by bacterial suspensions

1.

1. Tritium can be oxidized to water apparently through the activity of the enzyme hydrogenase.     

Removal of phenols from mixtures by co-immobilized laccase/tyrosinase and Polyclar adsorption

An enzymatic method for removal of phenols from their mixtures was investigated. Phenols in an aqueous solution were removed after a two-step treatment with co-immobilized laccase and tyrosinase and Polyclar (polyvinylpolypyrrolidone). A laccase from Pyricularia oryzae and mushroom tyrosinase were co-immobilized on Mikroperl in a fixed-bed tubular bioreactor by a rapid and simple method. The support immobilized 95% of the total laccase units and 35% of the total tyrosinase units. Different mixtures of phenols were passed through the column with co-immobilized laccase and tyrosinase. This method removed 42–90% of different phenolic substances by a single passage through the bioreactor. The second step employed Polyclar for additional removal of phenolic substances from mixtures. The degree of removal depends on the nature of the phenols. Complete removal was achieved for a-naphthol, 2,4-dichlorophenol, 4-methoxyphenol, b-naphthol, 4-chloro-3-methylphenol and catehin. The operational stability of the immobilized system was 10–90 h depending on the substrate. The biocatalyst was capable of continuous transformation of different phenols in mixtures. Journal of Industrial Microbiology & Biotechnology (2000) 24, 383–388. Received 12 August 1999/ Accepted in revised form 18 February 2000     

Understanding the substituent effect on the acidity of alcohols and para-substituted phenols

We carried out Hartree–Fock (HF) and density functional theory calculations on the conjugated bases of phenols and alcohols for 23 compounds and analysed their acid–base behaviour using molecular orbital (MO) energies and their dependence on solvent effects. Despite the well-known correlation between highest-occupied MO (HOMO) energies and proton affinity (PA), we observed that HOMO energies are inadequate to describe the acid–base behaviour of these compounds. Therefore, we established a criterion to identify the best frontier MO for describing PA values and also to understand why the HOMO approach fails. The MO that fits our criterion provided very good correlations with PA values, much better than those obtained by the HOMO energies. Since the frontier MOs are those which drive the acid–base reactions in each compound, they were called frontier effective-for-reaction MOs, or FERMOs. By using the FERMO concept, the reactions that are HOMO driven, and those that are not, can be better explained, independent of the calculation method used, since both HF and Kohn–Sham methodologies lead to the same FERMO.     

Degradability of polychlorinated phenols by bacterial populations in soil

The biodegradabilities of polychlorinated phenols including 5 isomers of trichlorophenols, 3 isomers of tetrachlorophenols and pentachlorophenol, were tested with 170 samples of soil collected from various environments. After the samples were inoculated into a succinate-containing mineral medium and incubated, the cultures were acclimatized to phenol concentrations from 10 to 100 ppm. Twenty six samples (15%) were observed to degrade 2, 4, 6-trichlorophenol (246TrCP) and a mixed sample of soil degraded 2, 3, 4, 6-tetrachlorophenol, but no degradation was seen with other chlorophenols. All of the mixed cultures acclimatized to and degrading 246TrCP also degraded phenol. For the degradation of 246TrCP, the NO₃′ ion was preferred to the NH₄⁺ ion as a nitrogen source. At concentrations below 500 ppm, 246TrCP was degraded completely within 8 d and the chloride ion was detected in the culture broth at an amount corresponding to that of the chlorinated phenol, although cell growth was inhibited at a 246TrCP concentration of 1,000 ppm. No possible intermediate product of 246TrCP was detected in the cultures.     

Dye removal from aqueous solution by adsorption on treated sawdust

Formaldehyde treated and sulphuric acid treated saw dusts were used to adsorb malachite green at varying dye concentration, adsorbent dose, pH and agitation time. Similar experiments were conducted with laboratory grade activated carbon to compare the results. The adsorption efficiency of sulphuric acid treated sawdust (SD) was higher than formaldehyde treated SD. The adsorption followed first order rate expression and Lagergren equation. An initial pH in the range of 6-9 was favorable for the dye removal by both the adsorbents. Dilute solutions were effectively decolorized by the adsorbents. It is proposed that in batch or stirred tank reactors, both adsorbents can be an attractive option for dye adsorption.     

Acid-base response of bacterial suspensions

The response of suspensions of non-proliferating bacteria to external pH ranging from 3.6 to 9.9 was examined. The acid-base response is affected by the number of viable cells in the suspensions and culture conditions (aerobiosis or anaerobiosis) but not by culture time, composition of the culture medium or the age of suspensions. The results with carbonylcyanide m-chlorophenylhydrazone-and N, N′- dicyclohexylcarbodiimide-treated cells indicated that passive proton conductance and proton translocation by ATP could be involved in this response. pH profiles of suspensions of 18 chemoheterotrophic Gram-negative and Gram-positive bacteria support the hypothesis that the proton gradient generated by an alkali or an acid shift could be dissipated by bacteria with respiratory metabolism. Received 2 June 1998/ Accepted in revised form 6 August 1998     

Inhibition of the growth of bacterial populations by suspensions obtained from Pseudomonas aeruginosa pyocinogenic strains

Suspensions obtained from five Pseudomonas aeruginosa pyocinogenic strains showed inhibitory and variable activity against bacterial strains belonging to the Nocardiaceae, Micrococcaceae, Neisseriaceae, Streptococcaceae, Vibrionaceae, Enterobacteriaceae, and Pseudomonadaceae families. Under special conditions, the same pyocinogenic P. aeruginosa strain can be affected by it own suspensions. These pyocinlike particles could be considered as a regulatory factor acting on the rate and size of the population growth.     

Hexavalent chromium removal from aqueous solution by adsorption on treated sawdust

The studies on adsorption of hexavalent chromium were conducted by varying various parameters such as contact time, pH, amount of adsorbent, concentration of adsorbate and temperature. The kinetics of adsorption of Cr(VI) ion followed pseudo second order. Langmuir adsorption isotherm was employed in order to evaluate the optimum adsorption capacity of the adsorbent. The adsorption capacity was found to be pH dependant. Sawdust was found to be very effective and reached equilibrium in 3 h (adsorbate concentration 30 mg l⁻¹). The rate constant has been calculated at 303, 308, 313 and 318 K and the activation energy (E_a) was calculated using the Arrhenius equation. Thermodynamic parameters such as standard Gibbs energy (ΔG°) and heat of adsorption (ΔH_r) were calculated. The ΔG° and ΔH_r values for Cr(VI) adsorption on the sawdust showed the process to be exothermic in nature. The percentage of adsorption increased with decrease in pH and showed maximum removal of Cr(VI) in the pH range 4.5–6.5 for an initial concentration of 5 mg l⁻¹.     

Cadmium adsorption by bacterial capsular polysaccharide coatings

Conclusions Excretion of a polysaccharide capsular coating byP.putida provided enhanced cadmium uptake when compared to the noncapsularP.cruciviae. As this advantage is most significant for cadmium concentrations below 2.5 mg/l, levels which are commonly found in waste discharges, it does suggest a potential role for extracellular polysaccharide producers as biosorbents. These encouraging results have led to further work to determine the desorption characteristics, by pH adjustment, ofP.putida along with long term viability after successive cycles of adsorption and desorption.     

Tyrosinase reaction/chitosan adsorption for selectively removing phenols from aqueous mixtures

The goal of this work was to explore the technical feasibility of an enzymatic approach as an alternative to traditional approaches for phenol separations. Specifically, we examined a two-step approach to selectively remove phenols from mixtures containing nonphenolic isomers. Our model solutes, of molecular formula C(7)H(8)O, were the phenol, cresol; the alkyl aryl ether, anisol; and the alcohol, benzyl alcohol. The first step is this two-step approach employed the enzyme mushroom tyrosinase to selectively convert the phenolic, presumably to an o-quinone product. The tyrosinase was specific for the phenol and was not observed to react with either the ether or the alcohol. The second step of this two-step approach employed a sorbent of an appropriate surface chemistry to bind the products of the tyrosinase-catalysed reaction of phenols. The sorbent used for this study was chitosan. Chitosan was observed to be unable to adsorb either nonphenol and was unable to adsorb unreacted cresol. However, Chittosan effectively adsorbs UV-absorbing reaction products of the tyrosinase-catalysed reaction of phenols. When mixtures of cresol and either anasol or benzyl alcohol were studied, the two-step approach was effective for completely removing the phenolic without loss of either the ether or alcohol or the ether (i.e., phenols were removed with high separation factors).     

Removal of Cu2+ from aqueous solution by adsorption onto a novel activated nylon-based membrane

A novel activated nylon-based membrane was prepared and applied as an adsorbent for the removal of Cu2+ from aqueous solutions. It involved three stages: (i) deposition of a chitosan layer that functionalized the nylon membrane, (ii) cross-linking with epichlorohydrin to stabilize the polymer layer and enabling grafting, and (iii) iminodiacetic acid grafting. SEM and EDX techniques were used to characterize the composition of the membranes. Dynamic adsorption experiments on membranes were carried out at various pH values, contact times, adsorption dosages and initial metal concentrations to determine optimum membrane adsorption properties. The adsorption isotherm relating to Cu2+ fitted the Langmuir equation and an adsorption equilibrium constant and adsorption capacity of 2.345x10(-3)mg/ml and 10.794mg/g were determined, respectively. The experimental data was analyzed using two adsorption kinetic models, pseudo-first-order and pseudo-second-order with the latter system providing the best fit. Finally complete regeneration of the activated nylon membrane was possible using 100mmol/l Na2EDTA.     

Biosorption of Fe3+ from aqueous solution by a bacterial dead Streptomyces rimosus biomass

The iron biosorption capacity of a Streptomyces rimosus biomass treated with NaOH was studied in batch mode. After pretreatment of biomass at the ambient temperature, optimum conditions of biosorption were found to be: a biomass particle size between 50 and 160 μm, an average saturation contact time of 4 h, a biomass concentration of 3 g/l and a stirring speed of 250 rpm. The equilibrium data could be fitted by Langmuir isotherm equation. Under these optimal conditions, 122 mg _Fe/g_biomass were fixed.