Modification of gel architecture and TBE/TAE buffer composition to minimize heating during agarose gel electrophoresis

Agarose gel electrophoresis of DNA and RNA is routinely performed using buffers containing either Tris, acetate, and EDTA (TAE) or Tris, borate, and EDTA (TBE). Gels are run at a low, constant voltage (∼10 V/cm) to minimize current and asymmetric heating effects, which can induce band artifacts and poor resolution. In this study, alterations of gel structure and conductive media composition were analyzed to identify factors causing higher electrical currents during horizontal slab gel electrophoresis. Current was reduced when thinner gels and smaller chamber buffer volumes were used, but was not influenced by agarose concentration or the presence of ethidium bromide. Current was strongly dependent on the amount and type of EDTA used and on the concentrations of the major acid–base components of each buffer. Interestingly, resolution and the mobilities of circular versus linear plasmid DNAs were also affected by the chemical form and amount of EDTA. With appropriate modifications to gel structure and buffer constituents, electrophoresis could be performed at high voltages (20–25 V/cm), reducing run times by up to 3-fold. The most striking improvements were observed with small DNAs and RNAs (10–100 bp): high voltages and short run times produced sharper bands and higher resolution.     

A simple and effective SuperBuffer for DNA agarose electrophoresis

In the paper, we describe a unique effective electrophoresis buffer for DNA agarose electrophoresis, called SuperBuffer. Using this buffer, electrophoresis could be performed within 10 min at voltages as high as 25 V/cm. In addition, DNA fragments of different lengths could be isolated clearly even at lower agarose gel concentrations and the DNA recovery efficiency was higher than that of the TAE/TBE running buffers. The SuperBuffer still retained its electrophoretic effect even after several uses.     

Seed‐dispersal interactions in fragmented landscapes – a metanetwork approach

Mutualistic interactions repeatedly preserved across fragmented landscapes can scale‐up to form a spatial metanetwork describing the distribution of interactions across patches. We explored the structure of a bird seed‐dispersal (BSD) metanetwork in 16 Neotropical forest fragments to test whether a distinct subset of BSD‐interactions may mediate landscape functional connectivity. The metanetwork is interaction‐rich, modular and poorly connected, showing high beta‐diversity and turnover of species and interactions. Interactions involving large‐sized species were lost in fragments < 10 000 ha, indicating a strong filtering by habitat fragmentation on the functional diversity of BSD‐interactions. Persistent interactions were performed by small‐seeded, fast growing plant species and by generalist, small‐bodied bird species able to cross the fragmented landscape. This reduced subset of interactions forms the metanetwork components persisting to defaunation and fragmentation, and may generate long‐term deficits of carbon storage while delaying forest regeneration at the landscape level.     

Chiral separation of catechin by capillary electrophoresis using mono‐, di‐, tri‐succinyl‐β‐cyclodextrin as chiral selectors

The chiral separation of (±)‐catechin was investigated by capillary electrophoresis using characterized succinyl‐β‐cyclodextrins (Suc‐β‐CDs) with one to three degree of substitution values. The effects of nature and concentration of Suc‐β‐CDs and running buffer pH on the migration time and resolution of (±)‐catechin are discussed. All three kinds of Suc‐β‐CDs show a clear baseline separation of (±)‐catechin in capillary electrophoresis. Mono‐Suc‐β‐CD effectively separated (±)‐catechin, and additional substituted CDs (di‐ and tri‐Suc‐β‐CD) were capable of chiral separation at a broad pH range. The optimum running conditions were found to be 100 mM borate buffer (pH 9.8) containing 5 mM mono‐Suc‐β‐CD with no methanol organic modifier. Chirality, 2009. © 2009 Wiley‐Liss, Inc.     

Highly accurate SNP genotyping from historical and low‐quality samples

Historical and other poor‐quality samples are often necessary for population genetics, conservation, and forensics studies. Although there is a long history of using mtDNA from such samples, obtaining and genotyping nuclear loci have been considered difficult and error‐prone at best, and impossible at worst. The primary issues are the amount of nuclear DNA available for genotyping, and the degradation of the DNA into small fragments. Single nucleotide polymorphisms offer potential advantages for assaying nuclear variation in historical and poor‐quality samples, because the amplified fragments can be very small, varying little or not at all in size between alleles, and can be amplified efficiently by polymerase chain reaction (PCR). We present a method for highly multiplexed PCR of SNP loci, followed by dual‐fluorescence genotyping that is very effective for genotyping poor‐quality samples, and can potentially use very little template DNA, regardless of the number of loci to be genotyped. We genotyped 19 SNP loci from DNA extracted from modern and historical bowhead whale tissue, bone and baleen samples. The PCR failure rate was < 1.5%, and the genotyping error rate was 0.1% when DNA samples contained > 10 copies/µL of a 51‐bp nuclear sequence. Among samples with ≤ 10 copies/µL DNA, samples could still be genotyped confidently with appropriate levels of replication from independent multiplex PCRs.     

A sensitive and specific multiplex PCR approach for sex identification of ursine and tremarctine bears suitable for non‐invasive samples

We report a new approach for molecular sex identification of extant Ursinae and Tremarctinae bears. Two Y‐specific fragments (SMCY and 318.2) and one X‐specific fragment (ZFX) are amplified in a multiplex PCR, yielding a double test for male‐specific amplification and an internal positive control. The primers were designed and tested to be bear‐specific, thereby minimizing the risk of cross‐amplification in other species including humans. The high sensitivity and small amplicon sizes (100, 124, 160 base pairs) facilitate analysis of non‐invasively obtained DNA material. DNA from tissue and blood as well as from 30 non‐invasively collected hair and faeces yielded clear and easily interpretable results. The fragments were detected both by standard gel electrophoresis and automated capillary electrophoresis.     

Generation of chromosomal deletions in dicotyledonous plants employing a user‐friendly genome editing toolkit

Genome editing facilitated by Cas9‐based RNA‐guided nucleases (RGNs) is becoming an increasingly important and popular technique for reverse genetics in both model and non‐model species. So far, RGNs were mainly applied for the induction of point mutations, and one major challenge consists in the detection of genome‐edited individuals from a mutagenized population. Also, point mutations are not appropriate for functional dissection of non‐coding DNA. Here, the multiplexing capacity of a newly developed genome editing toolkit was exploited for the induction of inheritable chromosomal deletions at six different loci in Nicotiana benthamiana and Arabidopsis. In both species, the preferential formation of small deletions was observed, suggesting reduced efficiency with increasing deletion size. Importantly, small deletions (<100 bp) were detected at high frequencies in N. benthamiana T₀ and Arabidopsis T₂ populations. Thus, targeting of small deletions by paired nucleases represents a simple approach for the generation of mutant alleles segregating as size polymorphisms in subsequent generations. Phenotypically selected deletions of up to 120 kb occurred at low frequencies in Arabidopsis, suggesting larger population sizes for the discovery of valuable alleles from addressing gene clusters or non‐coding DNA for deletion by programmable nucleases.     

Enantiomeric separation of Novel Psychoactive Substances by capillary electrophoresis using (+)‐18‐crown‐6‐tetracarboxylic acid as chiral selector

In the recent years, hundreds of Novel Psychoactive Substances (NPS) have entered both the European and the global drug market. These drugs, which are mainly used for recreational matters, have caused serious social problems. Every year, the spectrum of these misused drugs is enlarged by new derivatives, which are produced by modifications of basic structures of already well‐known substances. Additionally, a lot of them possess a stereogenic center which leads to 2 enantiomeric forms. The fact that the pharmacological effects and potencies of the enantiomers of these chiral NPS may differ can be assumed from a broad spectrum of active pharmaceutical ingredients. For this reason, analytical method development regarding enantiomeric separation for these classes of substances is of great pharmaceutical and medical interest. The aim of this work was to create an easy‐to‐prepare chiral capillary electrophoresis method for the enantioseparation of NPS which contains a primary amino group by means of (+)‐18‐crown‐6‐tetracarboxylic acid as chiral selector. Novel Psychoactive Substances were purchased at various Internet stores or represent samples seized by Austrian police. The effects of selector concentration, the electrolyte composition, and the addition of organic modifiers to the background electrolyte on enantioseparation were investigated. Under optimized conditions, the use of 20‐mM (+)‐18‐crown‐6‐tetracarboxylic acid, 10‐mM Tris, and 30‐mM citric acid buffer at pH 2.10 turned out to be effective. Fifteen of 24 tested NPS were resolved in their enantiomers within 15 minutes. It was found that all NPS were traded as racemic mixtures.     

Size‐selective DNA separation: Recovery spectra help determine the sodium chloride (NaCl) and polyethylene glycol (PEG) concentrations required

In the presence of sodium chloride (NaCl), DNA fragments can be size‐selectively separated by varying the final concentration of polyethylene glycol (PEG). This separation strategy in combination with the use of paramagnetic particles provides a valuable platform for achieving the desired DNA size interval, which is important in automated library preparation for high‐throughput DNA sequencing. Here, we report the establishment of recovery spectra of DNA fragments that enable the determination of suitable NaCl and PEG concentrations for size‐selective separation. Firstly, at a given NaCl concentration, the recovery equation was obtained by fitting the DNA recovery ratios versus the PEG concentrations using the logistic function to determine the required parameters. Secondly, the slope function of the recovery equation was achieved by deducing its first derivative. Therefore, the recovery spectrum can be generated using the slope function based on those parameters. According to the recovery spectra of different length DNA fragments, suitable NaCl and PEG concentrations can be determined, respectively, by calculating their resolution values and recovery ratios. The strategy was effectively applied to the size‐selective separation of 532‐, 400‐, and 307‐bp fragments at the selected reagent concentrations with recoveries of 96.9, 64.7, and 85.9%, respectively. Our method enables good predictions of NaCl and PEG concentrations for size‐selective DNA separation.     

The Arabidopsis TAC Position Viewer: a high‐resolution map of transformation‐competent artificial chromosome (TAC) clones aligned with the Arabidopsis thaliana Columbia‐0 genome

We present a high‐resolution map of genomic transformation‐competent artificial chromosome (TAC) clones extending over all Arabidopsis thaliana (Arabidopsis) chromosomes. The Arabidopsis genomic TAC clones have been valuable genetic tools. Previously, we constructed an Arabidopsis genomic TAC library consisting of more than 10 000 TAC clones harboring large genomic DNA fragments extending over the whole Arabidopsis genome. Here, we determined 13 577 end sequences from 6987 Arabidopsis TAC clones and mapped 5937 TAC clones to precise locations, covering approximately 90% of the Arabidopsis chromosomes. We present the large‐scale data set of TAC clones with high‐resolution mapping information as a Java application tool, the Arabidopsis TAC Position Viewer, which provides ready‐to‐go transformable genomic DNA clones corresponding to certain loci on Arabidopsis chromosomes. The TAC clone resources will accelerate genomic DNA cloning, positional walking, complementation of mutants and DNA transformation for heterologous gene expression.     

DNA barcodes from century‐old type specimens using next‐generation sequencing

Type specimens have high scientific importance because they provide the only certain connection between the application of a Linnean name and a physical specimen. Many other individuals may have been identified as a particular species, but their linkage to the taxon concept is inferential. Because type specimens are often more than a century old and have experienced conditions unfavourable for DNA preservation, success in sequence recovery has been uncertain. This study addresses this challenge by employing next‐generation sequencing (NGS) to recover sequences for the barcode region of the cytochrome c oxidase 1 gene from small amounts of template DNA. DNA quality was first screened in more than 1800 century‐old type specimens of Lepidoptera by attempting to recover 164‐bp and 94‐bp reads via Sanger sequencing. This analysis permitted the assignment of each specimen to one of three DNA quality categories – high (164‐bp sequence), medium (94‐bp sequence) or low (no sequence). Ten specimens from each category were subsequently analysed via a PCR‐based NGS protocol requiring very little template DNA. It recovered sequence information from all specimens with average read lengths ranging from 458 bp to 610 bp for the three DNA categories. By sequencing ten specimens in each NGS run, costs were similar to Sanger analysis. Future increases in the number of specimens processed in each run promise substantial reductions in cost, making it possible to anticipate a future where barcode sequences are available from most type specimens.     

Ultraviolet‐B‐driven pigmentation and genetic diversity of benthic macroinvertebrates from high‐altitude Andean streams

相似文献   

Behavioral classification of low‐frequency acceleration and temperature data from a free‐ranging small mammal

The miniaturization and affordability of new technology is driving a biologging revolution in wildlife ecology with use of animal‐borne data logging devices. Among many new biologging technologies, accelerometers are emerging as key tools for continuously recording animal behavior. Yet a critical, but under‐acknowledged consideration in biologging is the trade‐off between sampling rate and sampling duration, created by battery‐ (or memory‐) related sampling constraints. This is especially acute among small animals, causing most researchers to sample at high rates for very limited durations. Here, we show that high accuracy in behavioral classification is achievable when pairing low‐frequency acceleration recordings with temperature. We conducted 84 hr of direct behavioral observations on 67 free‐ranging red squirrels (200–300 g) that were fitted with accelerometers (2 g) recording tri‐axial acceleration and temperature at 1 Hz. We then used a random forest algorithm and a manually created decision tree, with variable sampling window lengths, to associate observed behavior with logger recorded acceleration and temperature. Finally, we assessed the accuracy of these different classifications using an additional 60 hr of behavioral observations, not used in the initial classification. The accuracy of the manually created decision tree classification using observational data varied from 70.6% to 91.6% depending on the complexity of the tree, with increasing accuracy as complexity decreased. Short duration behavior like running had lower accuracy than long‐duration behavior like feeding. The random forest algorithm offered similarly high overall accuracy, but the manual decision tree afforded the flexibility to create a hierarchical tree, and to adjust sampling window length for behavioral states with varying durations. Low frequency biologging of acceleration and temperature allows accurate behavioral classification of small animals over multi‐month sampling durations. Nevertheless, low sampling rates impose several important limitations, especially related to assessing the classification accuracy of short duration behavior.     

Molecular Typing of Cyst‐Forming Nematodes Globodera pallida and G. rostochiensis,Using Real‐Time PCR and Evaluation of Five Methods for Template Preparation

Globodera pallida and G. rostochiensis are two cyst‐forming nematodes known to infest potato crops, causing severe economic losses worldwide. In this study, a real‐time TaqMan PCR assay was developed and optimized for the simultaneous detection of G. pallida and G. rostochiensis. The assay's analytical and diagnostic sensitivity and specificity were evaluated using reference isolates. Four different DNA extraction methods and one rapid crude template‐preparation procedure were compared in terms of extraction purity, efficiency for PCR applications, utility and cost. Extraction methods A and B included two commercially available kits that utilize silica columns and magnetic beads, respectively. Method C was based on DNA isolation using Chelex resin, and method D was a standard chemistry in‐house protocol. Procedure E included the direct use of crude mixture composed of disrupted cysts in Tris–EDTA buffer. The multiplex TaqMan PCR assay successfully discriminated the two nematode species from all reference cyst samples and its recorded diagnostic sensitivity (Dse) and specificity (Dsp) was 100%. On the contrary, in conventional (Co) PCR tests, the overall Dsp and Dse were lower and estimated at 94 and 87% for G. pallida, and 97 and 88% for G. rostochiensis, respectively. Spectrophotometric results showed that DNA extraction methods A, B and C yielded the purest DNA and gave the lowest mean C_t values as well as the most consistent results in Co PCR. Alternative crude preparation method E resulted in statistically similar and C_t values consistent with those obtained with methods A to C when tested by TaqMan PCR. The developed assay, using crude template‐preparation E, allows the simple, accurate and cost‐effective testing of a large number of cyst samples and can be applied in surveys and certification schemes.     

Rapid detection of Phytophthora nicotianae by simple DNA extraction and real‐time loop‐mediated isothermal amplification assay

Phytophthora nicotianae is a phytopathogenic oomycete with a wide host range and worldwide distribution. Rapid detection and diagnosis at the early stages of disease development are important for the effective control of P. nicotianae. In this study, we designed a simple and rapid loop‐mediated isothermal amplification (LAMP)‐based detection method for P. nicotianae. We tested three DNA extraction methods and selected the Kaneka Easy DNA Extraction Kit version 2, which is rapid and robust for LAMP‐based detection. The designed primers were tested using mycelial DNA from 35 species (81 isolates) of Phytophthora, 12 species (12 isolates) of Pythium, one isolate of Phytopythium and one isolate each from seven other soil‐borne pathogens. All of the 42 P. nicotianae isolates were detected by these primers, and no other isolates gave positive results. Three isolates were tested for the sensitivity of the reaction, and the lowest amounts of template DNA that could be detected were 10 fg for two isolates and 1 fg for the third. The target was detected within 25 min in all tested samples, including DNA extracted from both inoculated and naturally infected plants. In contrast, PCR assays with P. nicotianae‐specific primers failed or showed weakened detection in several samples. Thus, we found that the rapid DNA extraction and LAMP assay methods developed in this study can be used to detect P. nicotianae with high sensitivity, specificity and stability.     

Chiral HPLC Separation and Modeling of Four Stereomers of DL‐Leucine‐DL‐Tryptophan Dipeptide on Amylose Chiral Column

Chiral high‐performance liquid chromatography (HPLC) separation and modeling of four stereomers of DL‐leucine‐tryptophan DL‐dipeptide on AmyCoat‐RP column are described. The mobile phase applied was ammonium acetate (10 mM)‐methanol‐acetonitrile (50:5:45, v/v). The flow rate of the mobile phases was 0.8 mL/min with UV detection at 230 nm. The values of retention factors for LL‐, DD‐, DL‐, and LD‐ stereomers were 2.25, 3.60, 5.00, and 6.50, respectively. The values of separation and resolution factors were 1.60, 1.39, and 1.30 and 7.76, 8.05, and 7.19. The limits of detection and quantitation were ranging from 1.0–2.3 and 5.6–14.0 μg/mL. The simulation studies established the elution orders and the mechanism of chiral recognition. It was seen that π–π connections and hydrogen bondings were the main forces for enantiomeric resolution. The reported chiral HPLC method may be applied for the enantiomeric separation of DL‐leucine‐DL‐tryptophan in unknown matrices. Chirality 28:642–648, 2016. © 2016 Wiley Periodicals, Inc.     

High‐Voltage Photogeneration Exclusively via Aggregation‐Induced Triplet States in a Heavy‐Atom‐Free Nonplanar Organic Semiconductor

The electron–hole recombination kinetics of organic photovoltaics (OPVs) are known to be sensitive to the relative energies of triplet and charge‐transfer (CT) states. Yet, the role of exciton spin in systems having CT states above 1.7 eV—like those in near‐ultraviolet‐harvesting OPVs—has largely not been investigated. Here, aggregation‐induced room‐temperature intersystem crossing (ISC) to facilitate exciton harvesting in OPVs having CT states as high as 2.3 eV and open‐circuit voltages exceeding 1.6 V is reported. Triplet excimers from energy‐band splitting result in ultrafast CT and charge separation with nonradiative energy losses of <250 meV, suggesting that a 0.1 eV driving force is sufficient for charge separation, with entropic gain via CT state delocalization being the main driver for exciton dissociation and generation of free charges. This finding can inform engineering of next‐generation active materials and films for near‐ultraviolet OPVs with open‐circuit voltages exceeding 2 V. Contrary to general belief, this work reveals that exclusive and efficient ISC need not require heavy‐atom‐containing active materials. Molecular aggregation through thin‐film processing provides an alternative route to accessing 100% triplet states on photoexcitation.     

Chromatographic profiles of tryptophan and kynurenine enantiomers derivatized with (S)‐4‐(3‐isothiocyanatopyrrolidin‐1‐yl)‐7‐(N,N‐dimethylaminosulfonyl)‐2,1,3‐benzoxadiazole using LC–MS/MS on a triazole‐bonded column

d ‐ and l ‐Tryptophan (Trp) and d ‐ and l ‐kynurenine (KYN) were derivatized with a chiral reagent, (S )‐4‐(3‐isothiocyanatopyrrolidin‐1‐yl)‐7‐(N,N‐dimethylaminosulfonyl)‐2,1,3‐benzoxadiazole (DBD‐PyNCS), and were separated enantiomerically by high‐performance liquid chromatography (HPLC) equipped with a triazole‐bonded column (Cosmosil HILIC) using tandem mass spectrometric (MS/MS) detection. Effects of column temperature, salt (HCO₂NH₄) concentration, and pH of the mobile phase in the enantiomeric separation, followed by MS detection of (S )‐DBD‐PyNCS‐d ,l ‐Trp and ‐d ,l ‐KYN, were investigated. The mobile phase consisting of CH₃CN/10 mM ammonium formate in H₂O (pH 5.0) (90/10) with a column temperature of 50–60 °C gave satisfactory resolution (R s) and mass‐spectrometric detection. The enantiomeric separation of d ,l ‐Trp and d ,l ‐KYN produced R s values of 2.22 and 2.13, and separation factors (α) of 1.08 and 1.08, for the Trp and KYN enantiomers, respectively. The proposed LC–MS/MS method provided excellent detection sensitivity of both enantiomers of Trp and KYN (5.1–19 nM).     

A real‐time fluorescence assay for protease activity and inhibitor screening based on the aggregation‐caused quenching of a perylene probe

We have established a real‐time and label‐free fluorescence turn‐on strategy for protease activity detection and inhibitor screening via peptide‐induced aggregation‐caused quenching of a perylene probe. Because of electrostatic interactions and high hydrophilicity, poly‐l ‐glutamic acid sodium salt (PGA; a negatively charged peptide) could induce aggregation of a positively charged perylene probe (probe 1) and the monomer fluorescence of probe 1 was effectively quenched. After a protease was added, PGA was enzymatically hydrolyzed into small fragments and probe 1 disaggregated. The fluorescence recovery of probe 1 was found to be proportional to the concentration of protease in the range from 0 to 1 mU/ml. The detection limit was down to 0.1 mU/ml. In the presence of a protease inhibitor, protease activity was inhibited and fluorescence recovery reduced. Moreover, we demonstrated the potential application of our method in a complex mixture sample including 1% human serum. Our method is simple, fast and cost effective.     

Design of Mini‐barcode for Catfishes for assessment of archival biodiversity

Recovery of DNA barcode sequences is often challenging from the archived specimens. However, short fragments of DNA may be recovered, which would significantly improve many unresolved taxonomic conflicts. Here, we designed a mini‐barcode for catfishes comprising several species and many cryptic taxa. We analysed a data set of 3048 publicly available COI barcode sequences representing 547 worldwide catfish species and performed 152 628 interspecies comparisons. A significantly more positively correlated interspecies distance was detected with transversion (0.78, P < 0.001) than with transition (0.70, P < 0.001). This suggested that transversions were better diagnostics for species identification. In the aligned data set, two transversion‐rich fragments (53 bp and 119 bp) were identified. Transition/transversion bias value was 1.04 in 53‐bp fragment, 1.23 in 119‐bp fragment and 1.50 in full‐length barcode. The interspecies distance with full‐length barcode was 0.212 ± 0.037, while that with 53‐bp and 119‐bp fragments was 0.325 ± 0.039 and 0.218 ± 0.045, respectively. Survey of 53‐bp fragment showed a possibility of only 1144 barcodes, while that of 119‐bp fragment showed >4 million barcodes. Thus, the 119‐bp fragment is a viable mini‐barcode for catfishes comprising >3000 extant species. Experiment with 82 archived catfishes showed successful recovery of this mini‐barcode using the designed primer. The mini‐barcode sequences showed species‐specific similarity in the range of 98‐100% with the global database. Therefore, survey of a transversion‐rich fragment within the full‐length barcode would be an ideal approach of mini‐barcode design for biodiversity assessment.