Identification and characterization of the products from the traJ and traY genes of plasmid R100.

The nucleotide sequence of part of the tra region of R100 including traJ and traY was determined, and the products of several tra genes were identified. The nucleotide sequence of traJ, encoding a protein of 223 amino acids, showed poor homology with the corresponding segments of other plasmids related to R100, but the deduced amino acid sequences showed low but significant homology. The first four amino acids at the N-terminal region of the TraJ protein were not essential for positive regulation of expression of traY, the first gene of the traYZ operon. The nucleotide sequence of traY shows that this gene may use TTG as the initiation codon and that it encodes a protein of 75 amino acids. Analysis of the traY gene product, which was obtained as the fusion protein with beta-galactosidase, showed that the N-terminal region of the product has an amino acid sequence identical to that deduced from the assigned frame but lacks formylmethionine. traY of plasmid F, which encodes a larger protein than the TraY protein of R100, is thought to use ATG as an initiation codon. However, a TTG initiation codon was found in the preceding region of the previously assigned traY coding frame of F. Interestingly, when translation of traY of F was initiated from TTG, the amino acid sequence homologous to the TraY protein of R100 appeared in tandem in the TraY protein of F. This may suggest that traY of F has undergone duplication of a gene like the traY gene of R100.     

Specific binding of the TraY protein to oriT and the promoter region for the traY gene of plasmid R100

The traY gene product of plasmid R100 was purified as a hybrid protein, TraY-collagen-beta-galactosidase. The hybrid protein as well as the TraY' protein, which was obtained by collagenolysis of the hybrid protein, specifically binds to an AT-rich 36-base pair sequence (here called sbyA) within the region including the origin of transfer, oriT. The oriT region consists of highly conserved and nonconserved regions among R100-related plasmids, and sbyA was located within the nonconserved region immediately adjacent to the conserved region. This supports the idea that the TraY protein has a role as a component of endonuclease in recognizing its own oriT sequence. Unexpectedly, however, the hybrid protein and the TraY' protein were also found to bind to two different AT-rich sequences (each 24 base pairs in length) in the promoter region preceding the traY gene (here called sbyB and sbyC). This suggests that the TraY protein may have another role in regulating the expression of its own gene. The "TAA(A/T)T" sequence motif observed in these binding sites might constitute a core sequence recognized by the TraY protein. Mg2+ is not required for the specific binding of the TraY protein.     

Specific DNA binding of the TraM protein to the oriT region of plasmid R100.

The product of the traM gene of plasmid R100 was purified as the TraM-collagen-beta-galactosidase fusion protein (TraM*) by using a beta-galactosidase-specific affinity column, and the TraM portion of TraM* (TraM') was separated by collagenolysis. Both the TraM* and TraM' proteins were found to bind specifically to a broad region preceding the traM gene. This region (designated sbm) was located within the nonconserved region in oriT among conjugative plasmids related to R100. The region seems to contain four core binding sites (designated sbmA, sbmB, sbmC, and sbmD), each consisting of a similar number of nucleotides and including a homologous 15-bp sequence. This result, together with the observation that the TraM* protein was located in the membrane fraction, indicates the possibility that the TraM protein has a function in anchoring the oriT region of R100 at the sbm sites to the membrane pore, through which the single-stranded DNA is transferred to the recipient. sbmC and sbmD, each of which contained a characteristic inverted repeat sequence, overlapped with the promoter region for the traM gene. This suggests that the expression of the traM gene may be regulated by its own product.     

Site- and strand-specific nicking in vitro at oriT by the traY-traI endonuclease of plasmid R100.

We developed an in vitro system to reproduce a site- and strand-specific nicking at the oriT region of plasmid R100. The nicking reaction was dependent on the purified TraY protein and on the lysate, which was prepared from cells overproducing the TraI protein. This supports the idea that the protein products of two genes, traY and traI, constitute an endonuclease that introduces a specific nick in vivo in the oriT region of the conjugative plasmids related to R100. The products were the "complex" DNA molecules with a protein covalently linked with the 5'-end of the nick. The nick was introduced in the strand, which is supposed to be transferred to recipient cells during conjugation, and was located at the site 59 base pairs upstream of the TraY protein binding site, sbyA.     

Mobilization of chimeric oriT plasmids by F and R100-1: role of relaxosome formation in defining plasmid specificity

Cleavage at the F plasmid nic site within the origin of transfer (oriT) requires the F-encoded proteins TraY and TraI and the host-encoded protein integration host factor in vitro. We confirm that F TraY, but not F TraM, is required for cleavage at nic in vivo. Chimeric plasmids were constructed which contained either the entire F or R100-1 oriT regions or various combinations of nic, TraY, and TraM binding sites, in addition to the traM gene. The efficiency of cleavage at nic and the frequency of mobilization were assayed in the presence of F or R100-1 plasmids. The ability of these chimeric plasmids to complement an F traM mutant or affect F transfer via negative dominance was also measured using transfer efficiency assays. In cases where cleavage at nic was detected, R100-1 TraI was not sensitive to the two-base difference in sequence immediately downstream of nic, while F TraI was specific for the F sequence. Plasmid transfer was detected only when TraM was able to bind to its cognate sites within oriT. High-affinity binding of TraY in cis to oriT allowed detection of cleavage at nic but was not required for efficient mobilization. Taken together, our results suggest that stable relaxosomes, consisting of TraI, -M, and -Y bound to oriT are preferentially targeted to the transfer apparatus (transferosome).     

Analysis of the traLEKBP sequence and the TraP protein from three F-like plasmids: F, R100-1 and ColB2.

The sequence of a region of the F plasmid containing the traLEKBP genes involved in plasmid transfer was compared to the equivalent regions of two IncFII plasmids, R100-1 and ColB2. The traLEK gene products of all three plasmids were virtually identical, with the most changes occurring in TraE. The TraB genes were also nearly identical except for an 11-codon extension at the 3' end of the R100-1 traB gene. The TraP protein of R100-l differed from those of F and ColB2 at its N terminus, while the ColB2 TraP protein contained a change of sequence in a predicted loop which was shown to be exposed in the periplasmic space by TnphoA mutagenesis. The effect of the altered TraP sequences was determined by complementing a traP mutant with clones expressing the traKBP genes of F, R100-1, and ColB2. The traP mutation in pOX38 (pOX38-traP474), a derivative of F, was found to have little effect on pilus production, pilus retraction, and filamentous phage growth and only a moderate effect on transfer. The transfer ability of pOX38-traP474 was shown to be affected by mutations in the rfa (lipopolysaccharide) locus and in ompA in the recipient cell in a manner similar to that for the wild-type pOX38-Km plasmid itself and could be complemented with the traP analogs from R100-1 and ColB2 to give an F-like phenotype. Thus, the TraP protein appears to play a minor role in conjugation and may interact with TraB, which varies in sequence along with TraP, in order to stabilize the proposed transmembrane complex formed by the tra operon products.     

Characterization of the oriT region of the IncFV plasmid pED208

DNA sequence analysis of a 2.2kb EcoRI-HindIII fragment from pED208, the derepressed form of the IncFV plasmid Folac, revealed sequences highly homologous to the oriT region, traM, and traJ genes of other IncF plasmids. The TraM protein was purified and immunoblots of fractionated cells containing pED208 or Folac showed that TraM was predominantly in the cytoplasm. Using DNA retardation assays and the DNase I footprinting technique, the TraM protein was found to bind to three large motifs in the oriT region: (I) an inverted repeat, (II) two direct repeats, and (III) the traM promoter region. These three footprint regions contained a Hinfl-like sequence (GANTC) that appeared 16 times, spaced 11-12 bp (or multiples thereof) apart, suggesting that TraM protein binds in a complex manner over this entire region.     

Characterization of the Escherichia coli F factor traY gene product and its binding sites.

The traY gene product (TraYp) from the Escherichia coli F factor has previously been purified and shown to bind a DNA fragment containing the F plasmid oriT region (E. E. Lahue and S. W. Matson, J. Bacteriol. 172:1385-1391, 1990). To determine the precise nucleotide sequence bound by TraYp, DNase I footprinting was performed. The TraYp-binding site is near, but not coincident with, the site that is nicked to initiate conjugative DNA transfer. In addition, a second TraYp binding site, which is coincident with the mRNA start site at the traYI promoter, is described. The Kd for each binding site was determined by a gel mobility shift assay. TraYp exhibits a fivefold higher affinity for the oriT binding site compared with the traYI promoter binding site. Hydrodynamic studies were performed to show that TraYp is a monomer in solution under the conditions used in DNA binding assays. Early genetic experiments implicated the traY gene product in the site- and strand-specific endonuclease activity that nicks at oriT (R. Everett and N. Willetts, J. Mol. Biol. 136:129-150, 1980; S. McIntire and N. Willetts, Mol. Gen. Genet. 178:165-172, 1980). As this activity has recently been ascribed to helicase I, it was of interest to see whether TraYp had any effect on this reaction. Addition of TraYp to nicking reactions catalyzed by helicase I showed no effect on the rate or efficiency of oriT nicking. Roles for TraYp in conjugative DNA transfer and a possible mode of binding to DNA are discussed.     

Analysis and characterization of the IncFV plasmid pED208 transfer region

pED208 is a transfer-derepressed mutant of the IncFV plasmid, F(0)lac, which has an IS2 element inserted in its traY gene, resulting in constitutive overexpression of its transfer (tra) region. The pED208 transfer region, which encodes proteins responsible for pilus synthesis and conjugative plasmid transfer, was sequenced and found to be very similar to the F tra region in terms of its organization although most pED208 tra proteins share only about 45% amino acid identity. All the essential genes for F transfer had homologs within the pED208 transfer region with the exception of traQ, which encodes the chaperone for stable F-pilin expression. F(0)lac appears to have a fertility inhibition system different than the FinOP system of other F-like plasmids, and its transfer efficiency was increased in the presence of F or R100, suggesting that it could be mobilized by these plasmids. The F-like transfer systems specified by F, R100, and F(0)lac were highly specific for their cognate origins of transfer (oriT) as measured by their abilities to mobilize chimeric oriT-containing plasmids.     

Characterizing the DNA contacts and cooperative binding of F plasmid TraM to its cognate sites at oriT

TraM is a DNA binding protein required for conjugative transfer of the self-transmissible IncF group of plasmids, including F, R1, and R100. F TraM binds to three sites in F oriT: two high affinity binding sites, sbmA and sbmB, which are direct repeats of nearly identical sequence involved in the autoregulation of the traM gene; and a lower affinity site, sbmC, an inverted repeat important for transfer, which is situated nearest to the nic site where transfer originates. TraM bound cooperatively to its binding sites at oriT; the presence of sbmA and sbmB increased the affinity for sbmC 10-fold. Bending of oriT DNA by TraM was minimal, suggesting that TraM, a tetramer, was able to loop the DNA when bound to sbmA and sbmB simultaneously. Hydroxyl radical footprinting of DNA of sbmA and sbmC revealed that TraM contacted the DNA within a region previously delineated by DNase I footprinting. TraM protected the CT bases within the sequence CTAG, which occurred at 12-base intervals on the top and bottom strand of sbmA, most consistently with other protected bases. The footprint on sbmC revealed that the predicted inverted repeats were protected by TraM with a pattern that began at the center of the repeats and radiated outward at 11-12 base intervals toward the 5'-ends of either strand. At high protein concentrations, this pattern extended beyond the footprint defined by DNase I, suggesting that the DNA was wrapped around the protein forming a nucleosome-like structure, which could aid in preparing the DNA for transfer.     

The origin of transfer of P307

The DNA fragment carrying the oriT region from the enterotoxin plasmid P307 was isolated and its polynucleotide sequence was determined. Using Southern hybridization assays with a synthetic oligonucleotide probe, the oriT region was identified on a 7.9-kb EcoRI fragment from P307. By ligating the fragment with the cloning vector pUC119, plasmid pAG10 was obtained. The physical map of the insert was determined and oriT was located on a 540-bp BglII/SalI fragment. After this fragment was subcloned into sequencing phages, the polynucleotide sequence was established. Part of the sequence proved to be almost identical to segments of the oriT regions of the plasmids F and R1; another neighboring region was very different among all three sequences. The polynucleotide sequence proximal to traM is highly similar to that of F but different from that of R1.     

Transfer protein TraY of plasmid R1 stimulates TraI-catalyzed oriT cleavage in vivo

The effect of TraY protein on TraI-catalyzed strand scission at the R1 transfer origin (oriT) in vivo was investigated. As expected, the cleavage reaction was not detected in Escherichia coli cells expressing tral and the integration host factor (IHF) in the absence of other transfer proteins. The TraM dependence of strand scission was found to be inversely correlated with the presence of TraY. Thus, the TraY and TraM proteins could each enhance cleaving activity at oriT in the absence of the other. In contrast, no detectable intracellular cleaving activity was exhibited by TraI in an IHF mutant strain despite the additional presence of both TraM and TraY. An essential role for IHF in this reaction in vivo is, therefore, implied. Mobilization experiments employing recombinant R1 oriT constructions and a heterologous conjugative helper plasmid were used to investigate the independent contributions of TraY and TraM to the R1 relaxosome during bacterial conjugation. In accordance with earlier observations, traY was dispensable for mobilization in the presence of traM, but mobilization did not occur in the absence of both traM and traY. Interestingly, although the cleavage assays demonstrate that TraM and TraY independently promote strand scission in vivo, TraM remained essential for mobilization of the R1 origin even in the presence of TraY. These findings suggest that, whereas TraY and TraM function may overlap to a certain extent in the R1 relaxosome, TraM additionally performs a second function that is essential for successful conjugative transmission of plasmid DNA.     

Purified Escherichia coli F-factor TraY protein binds oriT.

The traY gene of the Escherichia coli F plasmid has been shown by genetic studies (R. Everett and N. Willetts, J. Mol. Biol. 136:129-150, 1980) to be involved in the site-specific nicking reaction at oriT required for the initiation of DNA transfer during bacterial conjugation. In order to assign a biochemical function to TraY protein, the traY gene was cloned in a plasmid vector which utilizes the strong T7 phi 10 promoter to overproduce the protein. The plasmid-encoded TraY protein was specifically labeled with [35S]methionine, and purification of the polypeptide was accomplished by monitoring the radioactive label. Purified TraY protein had a relative molecular mass of approximately 17,000, as determined by polyacrylamide gel electrophoresis in the presence of sodium dodecyl sulfate. The amino terminus of the purified protein was sequenced to confirm that the protein was encoded by the traY gene. The protein sequence revealed that the start codon for the TraY protein was a UUG codon 36 base pairs upstream of the AUG start site originally deduced from the DNA sequence (T. Fowler, L. Taylor, and R. Thompson, Gene 26:79-89, 1983). This start sequence confirmed the premise of Inamoto et al. that the F-plasmid TraY polypeptide-coding sequence would begin with UUG, creating a reading frame which renders a large degree of amino acid sequence identity with the TraY polypeptide from R100 (S. Inamoto, Y. Yoshioka, and E. Ohtsubo, J. Bacteriol. 170:2749-2757, 1988). The purified TraY protein from F bound specifically to the origin of transfer region of the F plasmid. However, no nicking activity was detected at oriT by using TraY protein or TraY protein in conjunction with helicase I.     

oriT sequence of the antibiotic resistance plasmid R100.

We present the nucleotide sequence of the oriT region from plasmid R100. Comparison to other IncF plasmids revealed homology around the proposed nick sites as well as conservation of inverted repeated sequences in the nonhomologous region. Three areas showed strong homology (eight of nine nucleotides) to the consensus sequence for binding of integration host factor, suggesting a role for this DNA-binding protein in nicking at oriT.