Development and relations of <Emphasis Type="Italic">Fusarium culmorum</Emphasis> and <Emphasis Type="Italic">Pseudomonas fluorescens</Emphasis> in soil

The development of Fusarium culmorum and Pseudomonas fluorescens in soil, and the relations between them, were studied using membrane filters containing the fungus, the bacterium, or both microorganisms; the filters were incubated in soil. F. culmorum was identified by indirect immunofluorescence; the GUS-labeled strain was used to visualize P. fluorescens. It was found that F. culmorum introduced in soil can develop as a saprotroph, with the formation of mycelium, macroconidia, and a small amount of chlamydospores. Introduction of glucose and cellulose resulted in increased density of the F. culmorum mycelium and macroconidia. P. fluorescens suppressed the development of the F. culmorum mycelium in soil, but stimulated chlamydospore formation. Decreased mycelial density in the presence of P. fluorescens was more pronounced in soil without additions and less pronounced in the case of introduction of glucose or cellulose. F. culmorum had no effect on P. fluorescens growth in soil.     

Biotransformation of isoeugenol to vanillin by <Emphasis Type="Italic">Pseudomonas putida</Emphasis> IE27 cells

The ability to produce vanillin and/or vanillic acid from isoeugenol was screened using resting cells of various bacteria. The vanillin- and/or vanillic-acid-producing activities were observed in strains belonging to the genera Achromobacter, Aeromonas, Agrobacerium, Alcaligenes, Arthrobacter, Bacillus, Micrococcus, Pseudomonas, Rhodobacter, and Rhodococcus. Strain IE27, a soil isolate showing the highest vanillin-producing activity, was identified as Pseudomonas putida. We optimized the culture and reaction conditions for vanillin production from isoeugenol using P. putida IE27 cells. The vanillin-producing activity was induced by adding isoeugenol to the culture medium but not vanillin or eugenol. Under the optimized reaction conditions, P. putida IE27 cells produced 16.1 g/l vanillin from 150 mM isoeugenol, with a molar conversion yield of 71% at 20 °C after a 24-h incubation in the presence of 10% (v/v) dimethyl sulfoxide.     

Diversity of genetic systems responsible for naphthalene biodegradation in <Emphasis Type="Italic">Pseudomonas fluorescens</Emphasis> strains

The genetic systems that are responsible for naphthalene catabolism were analyzed in 18 naphthalene-degrading Pseudomonas fluorescens strains isolated from oil-contaminated soils in different regions of Russia. It was found that 13 strains contain plasmids, from 20 to 120 kb in size, at least 5 of which are conjugative and bear the catabolic genes responsible for the complete utilization of naphthalene and salicylate. Five plasmids belong to the P-7 incompatibility group, and two plasmids belong to the P-9 incompatibility group. The naphthalene biodegradation genes of P. fluorescens are highly homologous to each other. The study revealed a new group of the nahAc genes and two new variants of the nahG gene. The suggestion is made that the key genes of naphthalene biodegradation, nahAc and nahG, evolve independently and occur in P. fluorescens strains in different combinations.Translated from Mikrobiologiya, Vol. 74, No. 1, 2005, pp. 70–78.Original Russian Text Copyright © 2005 by Izmalkova, Sazonova, Sokolov, Kosheleva, Boronin.     

Purification and properties of fluoroacetate dehalogenase from <Emphasis Type="Italic">Pseudomonas fluorescens</Emphasis> DSM 8341

The degradation of fluoroacetate by microorganisms has been established for some time, although only a handful of dehalogenases capable of hydrolyzing the stable C–F bond have been studied. Pseudomonas fluorescens DSM 8341 was originally isolated from soil and readily degrades fluoroacetate, thus it was thought that its dehalogenase might have some desirable properties. The enzyme was purified from cell-free extracts and characterised: it is a monomer of 32,500 Da, with a pH optimum of 8 and is stable between pH 4 and 10; its activity is stimulated by some metal ions (Mg²⁺, Mn²⁺ and Fe³⁺), but inhibited by others (Hg²⁺, Ag²⁺). The enzyme is specific for fluoroacetate, and the K _m for this substrate (0.68 mM) is the lowest determined for enzymes of this type that have been investigated to date.     

Continuous cultures of <Emphasis Type="Italic">Pseudomonas putida</Emphasis> mt-2 overcome catabolic function loss under real case operating conditions

The long-term performance and stability of Pseudomonas putida mt-2 cultures, a toluene-sensitive strain harboring the genes responsible for toluene biodegradation in the archetypal plasmid pWW0, was investigated in a chemostat bioreactor functioning under real case operating conditions. The process was operated at a dilution rate of 0.1 h⁻¹ under toluene loading rates of 259 ± 23 and 801 ± 78 g m⁻³ h⁻¹ (inlet toluene concentrations of 3.5 and 10.9 g m⁻³, respectively). Despite the deleterious effects of toluene and its degradation intermediates, the phenotype of this sensitive P. putida culture rapidly recovered from a 95% Tol⁻ population at day 4 to approx. 100% Tol⁺ cells from day 13 onward, sustaining elimination capacities of 232 ± 10 g m⁻³ h⁻¹ at 3.5 g Tol m⁻³ and 377 ± 13 g m⁻³ h⁻¹ at 10.9 g Tol m⁻³, which were comparable to those achieved by highly tolerant strains such as P. putida DOT T1E and P. putida F1 under identical experimental conditions. Only one type of Tol⁻ variant, harboring a TOL-like plasmid with a 38.5 kb deletion (containing the upper and meta operons for toluene biodegradation), was identified.     

Utilization of <Emphasis Type="Italic">fadA</Emphasis> knockout mutant <Emphasis Type="Italic">Pseudomonas putida</Emphasis> for overproduction of medium chain-length-polyhydroxyalkanoate

The fadBA operon in the fatty acid β-oxidation pathway of P. putida KCTC1639 was blocked to induce a metabolic flux of the intermediates to the biosynthesis of medium chain-length PHA (mcl-PHA). Succinate at 150 mg l⁻¹ stimulated cell growth and also the biosynthesis of medium chain-length-polyhydroxyalkanoate. pH-stat fed-batch cultivation of the fadA knockout mutant P. putida KCTC1639 was carried out for 60 h, in which mcl-PHA reached 8 g l⁻¹ with a cell dry weight of 10.3 g l⁻¹.     

Toluene biodegradation by <Emphasis Type="Italic">Pseudomonas putida</Emphasis> F1: targeting culture stability in long-term operation

The stability of Pseudomonas putida F1, a strain harbouring the genes responsible for toluene degradation in the chromosome was evaluated in a bioscrubber under high toluene loadings and nitrogen limiting conditions at two dilution rates (0.11 and 0.27 h⁻¹). Each experiment was run for 30 days, period long enough for microbial instability to occur considering previously reported studies carried out with bacterial strains encoding the catabolic genes in the TOL plasmid. At all tested conditions, P. putida F1 exhibited stable performance as shown by the constant values of the specific toluene degradation yield, CO₂ produced versus toluene degraded yield, and biomass concentration within each steady state. Benzyl alcohol, a curing agent causing TOL plasmid deletion in Pseudomonas strains, was present in the cultivation medium as a result of the monooxygenation of toluene by the diooxygenase system of P. putida F1. However, no mutant population growing at the expense of the extracellular excreted carbon or lysis products was established in the chemostat as confirmed by the constant dissolved total organic carbon (TOC) concentration and fraction of toluene degrading cells (approx. 100%). In addition, batch experiments conducted with both lysis substrate and toluene simultaneously confirmed that P. putida F1 preferentially consumed toluene rather than extracellular excreted carbon.     

Measurement of the Growth of a Floc Forming Bacterium <Emphasis Type="Italic">Pseudomonas putida</Emphasis> CP1

Pseudomonas putida CP1 formed clumps of cells when grown on mono-chlorophenols but not on phenol or glucose. An increase in cell numbers for the organism grown on mono-chlorophenols was accompanied by a decrease in the dry weight. The change in shape of the bacterium from rod shape to coccus shape coupled with a reduction in cell size when the organism was grown under nutritional stress was found. This result together with cell aggregation affected the measurement of growth parameters in the system by conventional methods (optical density measurements, dry weight measurements and the plate count technique). Monitoring growth of Pseudomonas putida CP1 by a direct microscopic count technique was found to be more representative than conventional methods including optical density measurements, dry weight measurements and the plate count technique when grown on phenolics.     

Identification and characterization of a novel nitrilase from <Emphasis Type="Italic">Pseudomonas fluorescens</Emphasis> Pf-5

Nitrile groups are catabolized to the corresponding acid and ammonia through one-step reaction involving a nitrilase. Here, we report the use of bioinformatic and biochemical tools to identify and characterize the nitrilase (NitPf5) from Pseudomonas fluorescens Pf-5. The nitPf5 gene was identified via sequence analysis of the whole genome of P. fluorescens Pf-5 and subsequently cloned and overexpressed in Escherichia coli. DNA sequence analysis revealed an open-reading frame of 921 bp, capable of encoding a polypeptide of 307 amino acids residues with a calculated isoelectric point of pH 5.4. The enzyme had an optimal pH and temperature of 7.0°C and 45°C, respectively, with a specific activity of 1.7 and 1.9 μmol min⁻¹ mg protein⁻¹ for succinonitrile and fumaronitrile, respectively. The molecular weight of the nitrilase as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and gel filtration chromatography was 33,000 and 138,000 Da, respectively, suggesting that the enzyme is homotetrameric. Among various nitriles, dinitriles were the preferred substrate of NitPf5 with a K _m = 17.9 mM and k _cat/K _m = 0.5 mM⁻¹ s⁻¹ for succinonitrile. Homology modeling and docking studies of dinitrile and mononitrile substrate into the active site of NitPf5 shed light on the substrate specificity of NitPf5. Although nitrilases have been characterized from several other sources, P. fluorescens Pf-5 nitrilase NitPf5 is distinguished from other nitrilases by its high specific activity toward dinitriles, which make P. fluorescens NitPf5 useful for industrial applications, including enzymatic synthesis of various cyanocarboxylic acids.     

Carbon-limited fed-batch production of medium-chain-length polyhydroxyalkanoates from nonanoic acid by <Emphasis Type="Italic">Pseudomonas putida</Emphasis> KT2440

Pseudomonas putida KT2440 grew on glucose at a specific rate of 0.48 h⁻¹ but accumulated almost no poly-3-hydroxyalkanoates (PHA). Subsequent nitrogen limitation on nonanoic acid resulted in the accumulation of only 27% medium-chain-length PHA (MCL-PHA). In contrast, exponential nonanoic acid-limited growth (μ = 0.15 h⁻¹) produced 70 g l⁻¹ biomass containing 75% PHA. At a higher exponential feed rate (μ = 0.25 h⁻¹), the overall productivity was increased but less biomass (56 g l⁻¹) was produced due to higher oxygen demand, and the biomass contained less PHA (67%). It was concluded that carbon-limited exponential feeding of nonanoic acid or related substrates to cultures of P. putida KT2440 is a simple and highly effective method of producing MCL-PHA. Nitrogen limitation is unnecessary.     

Fed-batch production of unsaturated medium-chain-length polyhydroxyalkanoates with controlled composition by <Emphasis Type="Italic">Pseudomonas putida</Emphasis> KT2440

Unsaturated medium-chain-length polyhydroxyalkanoates (MCL-PHA) were produced at a productivity of 0.63–1.09 g PHA l⁻¹ h⁻¹ with final PHA content ranging from 42.6 to 55.8% in single-stage, carbon-limited, fed-batch fermentations of Pseudomonas putida KT2440. A mixture of nonanoic acid (NA) and 10-undecenoic acid (UDA⁼) was fed exponentially to control growth rate. Varying the specific growth rate (0.14 h⁻¹ vs. 0.23 h⁻¹) at similar substrate feed ratios (NA:UDA⁼ = 5:1) had little effect on the final PHA content and relative composition. However, decreasing the NA:UDA⁼ ratio decreased the final amount of PHA produced from 56% with NA:UDA⁼ = 5.07:1 to only 42% at NA:UDA⁼ = 2.47:1. The molar fraction of all 3-hydroxyalkanoate monomers in the PHA product was relatively constant throughout each fermentation, indicating that the final product was homogeneous rather than a mixture of different copolymers. A linear relationship between unsaturation of the PHA produced and unsaturation of the carbon feed was found, which demonstrates the feasibility of producing unsaturated MCL-PHAs with controlled polymeric composition in a fed-batch process.     

Microbial production of <Emphasis Type="Italic">cis</Emphasis>-1,2-dihydroxy-cyclohexa-3,5-diene-1-carboxylate by genetically modified <Emphasis Type="Italic">Pseudomonas putida</Emphasis>

Arene cis-diols are interesting chemicals because of their chiral structures and great potentials in industrial synthesis of useful chiral chemical products. Pseudomonas putida KT2442 was genetically modified to transform benzoic acid (benzoate) to 1,2-dihydroxy-cyclohexa-3,5-diene-1-carboxylic acid (DHCDC) or named benzoate cis-diol. BenD gene encoding cis-diol dehydrogenase was deleted to generate a mutant named P. putida KTSY01. Genes benABC encoding benzoate dioxygenase were cloned into plasmid pSYM01 and overexpressed in P. putida KTSY01. The recombinant bacteria P. putida KTSY01 (pSYM01) showed strong ability to transform benzoate to DHCDC. DHCDC of 2.3 g/L was obtained with a yield of 73% after 24 h of cultivation in shake flasks incubated under optimized growth conditions. Transformation of benzoate carried out in a 6-L fermentor using a benzoate fed-batch process produced over 17 g/L DHCDC after 48 h of fermentation. The average DHCDC production rate was 0.356 g L⁻¹ h⁻¹. DHCDC purified from the fermentation broth showed a purity of more than 95%, and its chemical structure was confirmed by nuclear magnetic resonance.     

Design of a secondary alcohol degradation pathway from <Emphasis Type="Italic">Pseudomonas fluorescens</Emphasis> DSM 50106 in an engineered <Emphasis Type="Italic">Escherichia coli</Emphasis>

The genes encoding an alcohol dehydrogenase, Baeyer–Villiger monooxygenase and an esterase from P. fluorescens DSM 50106, which seemed to be metabolically connected based on the sequence of the corresponding open reading frames, were cloned into one vector (pABE) and functionally expressed in Escherichia coli. Overall expression levels were quite low, however, using whole cells of E. coli JM109 pABE expressing the three recombinant enzymes, conversion of secondary alcohols (C_n) to the corresponding primary alcohols (C_n−2) and acetic acid via ketone and ester was possible. In this way, 2-decanol was almost completely converted within 20 h at 30°C. Thus, it could be shown that the three enzymes are metabolically connected and that they are most probably involved in alkane degradation via sub-terminal oxidation of the acyclic aliphatic hydrocarbons.     

Colonization of the <Emphasis Type="Italic">Arabidopsis</Emphasis> rhizosphere by fluorescent <Emphasis Type="Italic">Pseudomonas</Emphasis> spp. activates a root-specific,ethylene-responsive <Emphasis Type="Italic">PR-5</Emphasis> gene in the vascular bundle

Plants of which the roots are colonized by selected strains of non-pathogenic, fluorescent Pseudomonas spp. develop an enhanced defensive capacity against a broad spectrum of foliar pathogens. In Arabidopsis thaliana, this rhizobacteria-induced systemic resistance (ISR) functions independently of salicylic acid but requires responsiveness to jasmonic acid and ethylene. In contrast to pathogen-induced systemic acquired resistance (SAR), ISR is not associated with systemic changes in the expression of genes encoding pathogenesis-related (PR) proteins. To identify genes that are specifically expressed in response to colonization of the roots by ISR-inducing Pseudomonas fluorescens WCS417r bacteria, we screened a collection of Arabidopsis enhancer trap and gene trap lines containing a transposable element of the Ac/Ds system and the GUS reporter gene. We identified an enhancer trap line (WET121) that specifically showed GUS activity in the root vascular bundle upon colonization of the roots by WCS417r. Fluorescent Pseudomonas spp. strains P. fluorescens WCS374r and P. putida WCS358r triggered a similar expression pattern, whereas ISR-non-inducing Escherichia coli bacteria did not. Exogenous application of the ethylene precursor 1-aminocyclopropane-1-carboxylate (ACC) mimicked the rhizobacteria-induced GUS expression pattern in the root vascular bundle, whereas methyl jasmonic acid and salicylic acid did not, indicating that the Ds element in WET121 is inserted in the vicinity of an ethylene-responsive gene. Analysis of the expression of the genes in the close vicinity of the Ds element revealed AtTLP1 as the gene responsible for the in cis activation of the GUS reporter gene in the root vascular bundle. AtTLP1 encodes a thaumatin-like protein that belongs to the PR-5 family of PR proteins, some of which possess antimicrobial properties. AtTLP1 knockout mutant plants showed normal levels of WCS417r-mediated ISR against the bacterial leaf pathogen Pseudomonas syringae pv. tomato DC3000, suggesting that expression of AtTLP1 in the roots is not required for systemic expression of ISR in the leaves. Together, these results indicate that induction of AtTLP1 is a local response of Arabidopsis roots to colonization by non-pathogenic fluorescent Pseudomonas spp. and is unlikely to play a role in systemic resistance.     

Cloning,expression and characterization of a Baeyer-Villiger monooxygenase from <Emphasis Type="Italic">Pseudomonas putida</Emphasis> KT2440

The gene encoding a Baeyer-Villiger monooxygenase and identified in Pseudomonas putida KT2440 was cloned and functionally expressed in Escherichia coli. The highest yield of soluble protein could be achieved by co-expression of molecular chaperones. In order to determine the substrate specificity, biocatalyses were performed using crude cell extract, growing and resting cells. Examination of aromatic, cyclic and aliphatic ketones revealed a high specificity towards short-chain aliphatic ketones. Interestingly, some open-chain ketones were converted to the alkylacetates, while for others formation of the ester products with oxygen on the other side of the keto group could also be detected yielding the corresponding methyl or ethyl esters.     

Response of <Emphasis Type="Italic">Pseudomonas putida</Emphasis> F1 cultures to fluctuating toluene loads and operational failures in suspended growth bioreactors

The response of Pseudomonas putida F1 to process fluctuations and operational failures during toluene biodegradation was evaluated in a chemostat suspended growth bioreactor. The ability of P. putida F1 to rapidly increase its specific toluene degradation capacity resulted in no significant variation in process removal efficiency when toluene load was increased from 188 to 341 g m⁻³ h⁻¹. Likewise, bacterial activity rapidly reached steady state performance (in less than 1.5 h after the restoration of steady state operational conditions) following an 8 h process shutdown, or after episodes of toluene or mineral nutrients deprivation. Process performance was however highly sensitive to pH, as pH levels below 4.5 dramatically inhibited bacterial activity, decreasing severely process robustness and inducing a cycle of periodic process collapses and recoveries. This pH mediated deterioration of bacterial activity was confirmed by further respirometric tests, which revealed a 50–60% reduction in the O₂ consumption rate during the degradation of both toluene and 3-methyl catechol when pH decreased from 5.05 to 4.55. Finally, process robustness was quantified according to methods previously described in literature.     

The <Emphasis Type="Italic">Caenorhabditis</Emphasis><Emphasis Type="Italic">briggsae</Emphasis> genome contains active <Emphasis Type="Italic">CbmaT1</Emphasis> and <Emphasis Type="Italic">Tcb1</Emphasis> transposons

The maT clade of transposons is a group of transposable elements intermediate in sequence and predicted protein structure to mariner and Tc transposons, with a distribution thus far limited to a few invertebrate species. We present evidence, based on searches of publicly available databases, that the nematode Caenorhabditis briggsae has several maT-like transposons, which we have designated as CbmaT elements, dispersed throughout its genome. We also describe two additional transposon sequences that probably share their evolutionary history with the CbmaT transposons. One resembles a fold back variant of a CbmaT element, with long (380-bp) inverted terminal repeats (ITRs) that show a high degree (71%) of identity to CbmaT1. The other, which shares only the 26-bp ITR sequences with one of the CbmaT variants, is present in eight nearly identical copies, but does not have a transposase gene and may therefore be cross mobilised by a CbmaT transposase. Using PCR-based mobility assays, we show that CbmaT1 transposons are capable of excising from the C. briggsae genome. CbmaT1 excised approximately 500 times less frequently than Tcb1 in the reference strain AF16, but both CbmaT1 and Tcb1 excised at extremely high frequencies in the HK105 strain. The HK105 strain also exhibited a high frequency of spontaneous induction of unc-22 mutants, suggesting that it may be a mutator strain of C. briggsae.     

Methyl <Emphasis Type="Italic">tert</Emphasis>-butyl Ether and <Emphasis Type="Italic">tert</Emphasis>-butyl Alcohol Degradation by <Emphasis Type="Italic">Fusarium solani</Emphasis>

Fusarium solani degraded methyl tert-butyl ether (MTBE) and other oxygenated compounds from gasoline including tert-butyl alcohol (TBA). The maximum degradation rate of MTBE was 16 mg protein h and 46 mg/g protein h for TBA. The culture transformed 77% of the total carbon to ¹⁴CO₂. The estimated yield for MTBE was 0.18 g dry wt/g MTBE.     

Purification,characterization and gene cloning of isoeugenol-degrading enzyme from <Emphasis Type="Italic">Pseudomonas putida</Emphasis> IE27

An isoeugenol-degrading enzyme was purified to homogeneity from Pseudomonas putida IE27, an isoeugenol-assimilating bacterium. The purified enzyme was a 55 kDa monomer and catalyzed the initial step of isoeugenol degradation, the oxidative cleavage of the side chain double-bond of isoeugenol, to form vanillin. Another reaction product of isoeugenol degradation besides vanillin was identified to be acetaldehyde. The values of Km and k _cat for isoeugenol were 175 μM and 5.18 s^–1, respectively. The purified enzyme catalyzed the incorporation of an oxygen atom from either molecular oxygen or water into vanillin, suggesting that the isoeugenol-degrading enzyme is a kind of monooxygenase. The gene encoding the isoeugenol-degrading enzyme and its flanking regions were isolated from P. putida IE27. The amino acid sequence of the enzyme was similar to those of lignostilbene-α,β-dioxygenases, carotenoid monooxygenases and 9-cis-epoxycarotenoid dioxygenases.