A unique biotin carboxyl carrier protein in archaeon Sulfolobus tokodaii

Biotin carboxyl carrier protein (BCCP) is one subunit or domain of biotin-dependent enzymes. BCCP becomes an active substrate for carboxylation and carboxyl transfer, after biotinylation of its canonical lysine residue by biotin protein ligase (BPL). BCCP carries a characteristic local sequence surrounding the canonical lysine residue, typically -M-K-M-. Archaeon Sulfolobus tokodaii is unique in that its BCCP has serine replaced for the methionine C-terminal to the lysine. This BCCP is biotinylated by its own BPL, but not by Escherichia coli BPL. Likewise, E. coli BCCP is not biotinylated by S. tokodaii BPL, indicating that the substrate specificity is different between the two organisms.     

Protein biotinylation visualized by a complex structure of biotin protein ligase with a substrate

Biotin protein ligase (BPL) catalyzes the biotinylation of the biotin carboxyl carrier protein (BCCP) only at a special lysine residue. Here we report the first structure of BPL.BCCP complex crystals, which are prepared using two BPL mutants: R48A and R48A/K111A. From a detailed structural characterization, it is likely that the mutants retain functionality as enzymes but have a reduced activity to produce the reaction intermediate biotinyl-5'-AMP. The observed biotin and partly disordered ATP in the mutant structures may act as a non-reactive analog of the substrates or biotinyl-5'-AMP, thereby providing the complex crystals. The four crystallographically independent BPL.BCCP complexes obtained can be classified structurally into three groups: the formation stages 1 and 2 with apo-BCCP and the product stage with biotinylated holo-BCCP. Residues responsible for the complex formation as well as for the biotinylation reaction have been identified. The C-terminal domain of BPL shows especially large conformational changes to accommodate BCCP, suggesting its functional importance. The formation stage 1 complex shows the closest distance between the carboxyl carbon of biotin and the special lysine of BCCP, suggesting its relevance to the unobserved reaction stage. Interestingly, bound ATP and biotin are also seen in the product stage, indicating that the substrates may be recruited into the product stage complex before the release of holo-BCCP, probably for the next reaction cycle. The existence of formation and product stages before and after the reaction stage would be favorable to ensure both the reaction efficiency and the extreme substrate specificity of the biotinylation reaction.     

A biotin-based protein tagging system

Biotin protein ligase (BPL) mediates covalent attachment of biotin to a specific lysine residue of biotin carboxyl carrier protein (BCCP) of biotin-dependent enzymes. We recently found that the biotinylation reaction from thermophilic archaeon Sulfolobus tokodaii has a unique characteristic that the enzyme BPL forms a tight complex with the product, biotinylated BCCP (169 amino acid residues). In the current work, we attempted to apply this characteristic to a novel protein tagging system. Thus, the N terminus of S. tokodaii BCCP was truncated and the interaction of the resulting BCCP, BCCPΔ100 and BCCPΔ17 (with 69 and 152 residues, respectively), with BPL was investigated by surface plasmon resonance (SPR). It was found that the binding of BPL to the biotinylated BCCPΔ100 is extremely tight with a dissociation constant (K_D) of 1.2 nM, whereas that to the unbiotinylated counterpart was moderate with a K_D of 3.3 μM. Furthermore, chimeric proteins of glutathione S-transferase (GST) and green fluorescence protein (GFP) with BCCPΔ100 fused to their C terminus were prepared. The resulting fusion proteins were successfully biotinylated and captured on the BPL-modified SPR sensor chip or BPL-modified magnetic beads. The function of GST and GFP was hardly impaired on fusion with BCCPΔ100 and biotinylation of the latter.     

Substrate specificity of archaeon Sulfolobus tokodaii biotin protein ligase

Biotin protein ligase (BPL) is an enzyme mediating biotinylation of a specific lysine residue of the carboxyl carrier protein (BCCP) of biotin-dependent enzymes. We recently found that the substrate specificity of BPL from archaeon Sulfolobus tokodaii is totally different from those of many other organisms, in reflection of a difference in the local sequence of BCCP surrounding the canonical lysine residue. There is a conserved glycine residue in the biotin-binding site of Escherichia coli BPL, but this residue is replaced with alanine in S. tokodaii BPL. To test the notion that this substitution dictates the substrate specificity of the latter enzyme, this residue, Ala-43, was converted to glycine. The K(m) values of the resulting mutant, A43G, for substrates, were smaller than those of the wild type, suggesting that the residue in position 43 of BPL plays an important role in substrate binding.     

The C-terminal domain of biotin protein ligase from E. coli is required for catalytic activity

Biotin protein ligase of Escherichia coli, the BirA protein, catalyses the covalent attachment of the biotin prosthetic group to a specific lysine of the biotin carboxyl carrier protein (BCCP) subunit of acetyl-CoA carboxylase. BirA also functions to repress the biotin biosynthetic operon and synthesizes its own corepressor, biotinyl-5'-AMP, the catalytic intermediate in the biotinylation reaction. We have previously identified two charge substitution mutants in BCCP, E119K, and E147K that are poorly biotinylated by BirA. Here we used site-directed mutagenesis to investigate residues in BirA that may interact with E119 or E147 in BCCP. None of the complementary charge substitution mutations at selected residues in BirA restored activity to wild-type levels when assayed with our BCCP mutant substrates. However, a BirA variant, in which K277 of the C-terminal domain was substituted with Glu, had significantly higher activity with E119K BCCP than did wild-type BirA. No function has been identified previously for the BirA C-terminal domain, which is distinct from the central domain thought to contain the ATP binding site and is known to contain the biotin binding site. Kinetic analysis of several purified mutant enzymes indicated that a single amino acid substitution within the C-terminal domain (R317E) and located some distance from the presumptive ATP binding site resulted in a 25-fold decrease in the affinity for ATP. Our data indicate that the C-terminal domain of BirA is essential for the catalytic activity of the enzyme and contributes to the interaction with ATP and the protein substrate, the BCCP biotin domain.     

Structural and Functional Studies of the Biotin Protein Ligase from Aquifex aeolicus Reveal a Critical Role for a Conserved Residue in Target Specificity

Biotin protein ligase (BPL; EC 6.3.4.15) catalyses the formation of biotinyl-5′-AMP from biotin and ATP, and the succeeding biotinylation of the biotin carboxyl carrier protein. We describe the crystal structures, at 2.4 Å resolution, of the class I BPL from the hyperthermophilic bacteria Aquifex aeolicus (AaBPL) in its ligand-free form and in complex with biotin and ATP. The solvent-exposed β- and γ-phosphates of ATP are located in the inter-subunit cavity formed by the N- and C-terminal domains. The Arg40 residue from the conserved GXGRXG motif is shown to interact with the carboxyl group of biotin and to stabilise the α- and β-phosphates of the nucleotide. The structure of the mutant AaBPL R40G in both the ligand-free and biotin-bound forms reveals that the mutated loop has collapsed, thus hindering ATP binding. Isothermal titration calorimetry indicated that the presence of biotin is not required for ATP binding to wild-type AaBPL in the absence of Mg²⁺, and the binding of biotin and ATP has been determined to occur via a random but cooperative process. The affinity for biotin is relatively unaffected by the R40G mutation. In contrast, the thermodynamic data indicate that binding of ATP to AaBPL R40G is very weak in the absence or in the presence of biotin. The AaBPL R40G mutant remains catalytically active but shows poor substrate specificity; mass spectrometry and Western blot studies revealed that the mutant biotinylates both the target A. aeolicus BCCPΔ67 fragment and BSA, and is subject to self-biotinylation.     

Diversity in functional organization of class I and class II biotin protein ligase

The cell envelope of Mycobacterium tuberculosis (M. tuberculosis) is composed of a variety of lipids including mycolic acids, sulpholipids, lipoarabinomannans, etc., which impart rigidity crucial for its survival and pathogenesis. Acyl CoA carboxylase (ACC) provides malonyl-CoA and methylmalonyl-CoA, committed precursors for fatty acid and essential for mycolic acid synthesis respectively. Biotin Protein Ligase (BPL/BirA) activates apo-biotin carboxyl carrier protein (BCCP) by biotinylating it to an active holo-BCCP. A minimal peptide (Schatz), an efficient substrate for Escherichia coli BirA, failed to serve as substrate for M. tuberculosis Biotin Protein Ligase (MtBPL). MtBPL specifically biotinylates homologous BCCP domain, MtBCCP(87), but not EcBCCP(87). This is a unique feature of MtBPL as EcBirA lacks such a stringent substrate specificity. This feature is also reflected in the lack of self/promiscuous biotinylation by MtBPL. The N-terminus/HTH domain of EcBirA has the self-biotinable lysine residue that is inhibited in the presence of Schatz peptide, a peptide designed to act as a universal acceptor for EcBirA. This suggests that when biotin is limiting, EcBirA preferentially catalyzes, biotinylation of BCCP over self-biotinylation. R118G mutant of EcBirA showed enhanced self and promiscuous biotinylation but its homologue, R69A MtBPL did not exhibit these properties. The catalytic domain of MtBPL was characterized further by limited proteolysis. Holo-MtBPL is protected from proteolysis by biotinyl-5' AMP, an intermediate of MtBPL catalyzed reaction. In contrast, apo-MtBPL is completely digested by trypsin within 20 min of co-incubation. Substrate selectivity and inability to promote self biotinylation are exquisite features of MtBPL and are a consequence of the unique molecular mechanism of an enzyme adapted for the high turnover of fatty acid biosynthesis.     

Mutational analysis of protein substrate presentation in the post-translational attachment of biotin to biotin domains

Biotinylation in vivo is an extremely selective post-translational event where the enzyme biotin protein ligase (BPL) catalyzes the covalent attachment of biotin to one specific and conserved lysine residue of biotin-dependent enzymes. The biotin-accepting lysine, present in a conserved Met-Lys-Met motif, resides in a structured domain that functions as the BPL substrate. We have employed phage display coupled with a genetic selection to identify determinants of the biotin domain (yPC-104) of yeast pyruvate carboxylase 1 (residues 1075-1178) required for interaction with BPL. Mutants isolated using this strategy were analyzed by in vivo biotinylation assays performed at both 30 degrees C and 37 degrees C. The temperature-sensitive substrates were reasoned to have structural mutations, leading to compromised conformations at the higher temperature. This interpretation was supplemented by molecular modeling of yPC-104, since these mutants mapped to residues involved in defining the structure of the biotin domain. In contrast, substitution of the Met residue N-terminal to the target lysine with either Val or Thr produced mutations that were temperature-insensitive in the in vivo assay. Furthermore, these two mutant proteins and wild-type yPC-104 showed identical susceptibility to trypsin, consistent with these substitutions having no structural effect. Kinetic analysis of enzymatic biotinylation using purified Met --> Thr/Val mutant proteins with both yeast and Escherichia coli BPLs revealed that these substitutions had a strong effect upon K(m) values but not k(cat). The Met --> Thr mutant was a poor substrate for both BPLs, whereas the Met --> Val substitution was a poor substrate for bacterial BPL but had only a 2-fold lower affinity for yeast BPL than the wild-type peptide. Our data suggest that substitution of Thr or Val for the Met N-terminal of the biotinyl-Lys results in mutants specifically compromised in their interaction with BPL.     

Selectivity in post-translational biotin addition to five human carboxylases

Human holocarboxylase synthetase (HCS) catalyzes linkage of the vitamin biotin to the biotin carboxyl carrier protein (BCCP) domain of five biotin-dependent carboxylases. In the two-step reaction, the activated intermediate, bio-5'-AMP, is first synthesized from biotin and ATP, followed by covalent linkage of the biotin moiety to a specific lysine residue of each carboxylase BCCP domain. Selectivity in HCS-catalyzed biotinylation to the carboxylases was investigated in single turnover stopped flow and quench flow measurements of biotin transfer to the minimal biotin acceptor BCCP fragments of the carboxylases. The results demonstrate that biotinylation of the BCCP fragments of the mitochondrial carboxylases propionyl-CoA carboxylase, pyruvate carboxylase, and methylcrotonoyl-CoA carboxylase is fast and limited by the bimolecular association rate of the enzyme with substrate. By contrast, biotinylation of the acetyl-CoA carboxylase 1 and 2 (ACC1 and ACC2) fragments, both of which are accessible to HCS in the cytoplasm, is slow and displays a hyperbolic dependence on substrate concentration. The correlation between HCS accessibility to biotin acceptor substrates and the kinetics of biotinylation suggests that mitochondrial carboxylase sequences evolved to produce fast association rates with HCS in order to ensure biotinylation prior to mitochondrial import. In addition, the results are consistent with a role for HCS specificity in dictating biotin distribution among carboxylases.     

Comparison of the backbone dynamics of the apo- and holo-carboxy-terminal domain of the biotin carboxyl carrier subunit of Escherichia coli acetyl-CoA carboxylase

The biotin carboxyl carrier protein (BCCP) is a subunit of acetyl-CoA carboxylase, a biotin-dependent enzyme that catalyzes the first committed step of fatty acid biosynthesis. In its functional cycle, this protein engages in heterologous protein-protein interactions with three distinct partners, depending on its state of post-translational modification. Apo-BCCP interacts specifically with the biotin holoenzyme synthetase, BirA, which results in the post-translational attachment of biotin to a single lysine residue on BCCP. Holo-BCCP then interacts with the biotin carboxylase subunit of acetyl-CoA carboxylase, which leads to the addition of the carboxylate group of bicarbonate to biotin. Finally, the carboxy-biotinylated form of BCCP interacts with transcarboxylase in the transfer of the carboxylate to acetyl-CoA to form malonyl-CoA. The determinants of protein-protein interaction specificity in this system are unknown. The NMR solution structure of the unbiotinylated form of an 87 residue C-terminal domain fragment (residue 70-156) of BCCP (holoBCCP87) and the crystal structure of the biotinylated form of a C-terminal fragment (residue 77-156) of BCCP from Escherichia coli acetyl-CoA carboxylase have previously been determined. Comparative analysis of these structures provided evidence for small, localized conformational changes in the biotin-binding region upon biotinylation of the protein. These structural changes may be important for regulating specific protein-protein interactions. Since the dynamic properties of proteins are correlated with local structural environments, we have determined the relaxation parameters of the backbone 15N nuclear spins of holoBCCP87, and compared these with the data obtained for the apo protein. The results indicate that upon biotinylation, the inherent mobility of the biotin-binding region and the protruding thumb, with which the biotin group interacts in the holo protein, are significantly reduced.     

A minimal peptide substrate in biotin holoenzyme synthetase-catalyzed biotinylation

The Escherichia coli biotin holoenzyme synthetase, BirA, catalyzes transfer of biotin to the epsilon amino group of a specific lysine residue of the biotin carboxyl carrier protein (BCCP) subunit of acetyl-CoA carboxylase. Sequences of naturally biotinylated substrates are highly conserved across evolutionary boundaries, and cross-species biotinylation has been demonstrated in several systems. To define the minimal substrate requirements in BirA-catalyzed biotinylation, we have measured the kinetics of modification of a 23-residue peptide previously identified by combinatorial methods. Although the sequence of the peptide bears little resemblance to the biotinylated sequence in BCCP, it is enzymatically biotinylated in vivo. Rates of biotin transfer to the 23-residue peptide are similar to those determined for BCCP. To further elucidate the sequence requirements for biotinylation, transient kinetic measurements were performed on a series of amino- and carboxy-terminal truncations of the 23-mer. The results, determined by stopped-flow fluorescence, allowed identification of a 14-residue peptide as the minimum required sequence. Additional support was obtained using matrix-assisted laser desorption ionization time-of-flight (MALDI-TOF) mass spectrometric analysis of peptides that had been incubated with an excess of biotinyl-5'-adenylate intermediate and catalytic amounts of BirA. Results of these measurements indicate that while kinetically inactive truncations showed no significant shift in molecular mass to the values expected for biotinylated species, kinetically active truncations exhibited 100% biotinylation. The specificity constant (k(cat)/Km) governing BirA-catalyzed biotinylation of the 14-mer minimal substrate is similar to that determined for the natural substrate, BCCP. We conclude that the 14-mer peptide efficiently mimics the biotin acceptor function of the much larger protein domain normally recognized by BirA.     

Noncovalent Immobilization of Streptavidin on In Vitro- and In Vivo-Biotinylated Bacterial Magnetic Particles

Biotinylated magnetic nanoparticles were constructed by displaying biotin acceptor peptide (BAP) or biotin carboxyl carrier protein (BCCP) on the surface of bacterial magnetic particles (BacMPs) synthesized by Magnetospirillum magneticum AMB-1. BAP-displaying BacMPs (BAP-BacMPs) were extracted from bacterial cells and incubated with biotin and Escherichia coli biotin ligase. Then the in vitro biotinylation of BAP-BacMPs was confirmed using alkaline phosphatase-labeled antibiotin antibody. In contrast, BacMPs displaying the intact 149 residues of AMB-1 BCCP (BCCP-BacMPs) and displaying the COOH-terminal 78 residues of BCCP (BCCP78-BacMPs) were biotinylated in AMB-1 cells. The in vivo biotinylation of BCCP-BacMPs and BCCP78-BacMPs was thought to be performed by endogenous AMB-1 biotin ligase. Streptavidin was introduced onto biotinylated BacMPs by simple mixing. In an analysis using tetramethyl rhodamine isocyanate-labeled streptavidin, approximately 15 streptavidin molecules were shown to be immobilized on a single BCCP-BacMP. Furthermore, gold nanoparticle-BacMP composites were constructed via the biotin-streptavidin interaction. The conjugation system developed in this work provides a simple, low-cost method for producing biotin- or streptavidin-labeled magnetic nanoparticles. Various functional materials can be site selectively immobilized on these specially designed BacMPs. By combining the site-selective biotinylation technology and the protein display technology, more innovative and attractive magnetic nanomaterials can be constructed.     

生物素化荧光素酶的克隆表达及其固定化研究

为了在体内实现萤火虫荧光素酶的生物素酰化修饰,我们将大肠杆菌中编码生物素羧基载体蛋白（biotin carboxyl carrier protein,BCCP）C端87个氨基酸的功能域基因融合到萤火虫(Pyrocoelia pectoralis)荧光素酶cDNA的末端。经大肠杆菌生物素合成酶（biotin holoenzyme synthetase）的催化,生物素与BCCP上特定的赖氨酸（Lys）残基共价结合,由此与BCCP融合的萤火虫荧光素酶间接实现了生物素化的修饰。利用生物素与配体亲和素或链霉亲和素的特异性耦合,可以将荧光素酶固定到亲和素或链霉亲和素包被的磁珠上,从而使荧光检测的应用更加灵活和方便。本文将就生物素化荧光素酶的克隆、表达以及功能检测进行具体讨论。     

Immobilization of immunoglobulin-G-binding domain of Protein A on a gold surface modified with biotin ligase

Protein A from Staphylococcus aureus specifically binds to the Fc region of immunoglobulin G (IgG) and is widely used as a scaffold for the immobilization of IgG antibodies on solid supports. It is known that the oriented immobilization of Protein A on solid supports enhances its antibody-binding capability in comparison with immobilization in a random manner. In the current work, we developed a novel method for the oriented immobilization of the IgG-binding domain of Protein A based on the biotinylation reaction from archaeon Sulfolobus tokodaii. Biotinylation from S. tokodaii has a unique property in that the enzyme, biotin protein ligase (BPL), forms a stable complex with its biotinylated substrate protein, biotin carboxyl carrier protein (BCCP). Here, BCCP was fused to the IgG-binding domain of Protein A, and the resulting fusion protein was immobilized on the BPL-modified gold surface of the sensor chip for quartz crystal microbalance through complexation between BCCP and BPL. The layer of the IgG-binding domain prepared in this way successfully captured the antibody, and the captured antibody retained high antigen-binding capability.     

The biotinyl domain of Escherichia coli acetyl-CoA carboxylase. Evidence that the "thumb" structure id essential and that the domain functions as a dimer

Biotin carboxyl carrier protein (BCCP) is the small biotinylated subunit of Escherichia coli acetyl-CoA carboxylase (ACC), the enzyme that catalyzes the first committed step of fatty acid synthesis. Similar proteins are found in other bacteria and in chloroplasts. E. coli BCCP is a member of a large family of protein domains modified by covalent attachment of biotin to a specific lysine residue. However, the BCCP biotinyl domain differs from many of these proteins in that an eight-amino acid residue insertion is present upstream of the biotinylated lysine. X-ray crystallographic and multidimensional NMR studies show that these residues constitute a structure that has the appearance of an extended thumb that protrudes from the otherwise highly symmetrical domain structure. I report that expression of two mutant BCCPs lacking the thumb residues fails to restore growth and fatty acid synthesis to a temperature-sensitive E. coli strain that lacks BCCP when grown at nonpermissive temperature. Alignment of BCCPs from various organisms shows that only two of the eight thumb residues are strictly conserved, and amino acid substitution of either residue results in proteins giving only weak growth of the temperature-sensitive E. coli strain. Therefore, the thumb structure is essential for the function of BCCP in the ACC reaction and provides a useful motif for distinguishing the biotinylated proteins of multisubunit ACCs from those of enzymes catalyzing other biotin-dependent reactions. An unexpected result was that expression of a mutant BCCP in which the biotinylated lysine residue was substituted with cysteine was able to partially restore growth and fatty acid synthesis to the temperature-sensitive E. coli strain. This complementation was shown to be specific to BCCPs having native structure (excepting the biotinylated lysine) and is interpreted in terms of dimerization of the BCCP biotinyl domain during the ACC reaction.     

Ligand specificity of group I biotin protein ligase of Mycobacterium tuberculosis

Background

Fatty acids are indispensable constituents of mycolic acids that impart toughness & permeability barrier to the cell envelope of M. tuberculosis. Biotin is an essential co-factor for acetyl-CoA carboxylase (ACC) the enzyme involved in the synthesis of malonyl-CoA, a committed precursor, needed for fatty acid synthesis. Biotin carboxyl carrier protein (BCCP) provides the co-factor for catalytic activity of ACC.

Methodology/Principal Findings

BPL/BirA (Biotin Protein Ligase), and its substrate, biotin carboxyl carrier protein (BCCP) of Mycobacterium tuberculosis (Mt) were cloned and expressed in E. coli BL21. In contrast to EcBirA and PhBPL, the ∼29.5 kDa MtBPL exists as a monomer in native, biotin and bio-5′AMP liganded forms. This was confirmed by molecular weight profiling by gel filtration on Superdex S-200 and Dynamic Light Scattering (DLS). Computational docking of biotin and bio-5′AMP to MtBPL show that adenylation alters the contact residues for biotin. MtBPL forms 11 H-bonds with biotin, relative to 35 with bio-5′AMP. Docking simulations also suggest that bio-5′AMP hydrogen bonds to the conserved ‘GRGRRG’ sequence but not biotin. The enzyme catalyzed transfer of biotin to BCCP was confirmed by incorporation of radioactive biotin and by Avidin blot. The K_m for BCCP was ∼5.2 µM and ∼420 nM for biotin. MtBPL has low affinity (K_b = 1.06×10⁻⁶ M) for biotin relative to EcBirA but their K_m are almost comparable suggesting that while the major function of MtBPL is biotinylation of BCCP, tight binding of biotin/bio-5′AMP by EcBirA is channeled for its repressor activity.

Conclusions/Significance

These studies thus open up avenues for understanding the unique features of MtBPL and the role it plays in biotin utilization in M. tuberculosis.     

The biotin carboxylase-biotin carboxyl carrier protein complex of Escherichia coli acetyl-CoA carboxylase

Escherichia coli acetyl-CoA carboxylase (ACC) is composed of four different protein molecules. These proteins form a large but very unstable complex. Hints of a sub-complex between the biotin carboxylase (BC) and biotin carboxyl carrier protein (BCCP) subunits have been reported in the literature, but the complex was not isolated and thus the protein stoichiometry could not be determined. We report isolation of the BC.BCCP complex. By use of affinity chromatography using two different affinity tags it was shown that the complex consists of a two BCCP molecules per BC molecule. The molar ratio in the complex is the same as the ratio of the subunit proteins synthesized in vivo. We conclude that the complex consists of a dimer of BC plus four BCCP molecules instead of the 2BC.2BCCP complex previously assumed. This subunit ratio allows two conflicting models of the ACC mechanism to be rectified. We also report that the N-terminal 30 or so residues of BCCP are responsible for the interaction of BCCP with BC and that the BC.BCCP complex is a substrate for biotinylation in vitro.     

Identification of the tRNA-binding protein Arc1p as a novel target of in vivo biotinylation in Saccharomyces cerevisiae

Biotin is an essential cofactor of cell metabolism serving as a protein-bound coenzyme in ATP-dependent carboxylation, in transcarboxylation, and certain decarboxylation reactions. The involvement of biotinylated proteins in other cellular functions has been suggested occasionally, but available data on this are limited. In the present study, a Saccharomyces cerevisiae protein was identified that reacts with streptavidin on Western blots and is not identical to one of the known biotinylated yeast proteins. After affinity purification on monomeric avidin, the biotinylated protein was identified as Arc1p. Using 14C-labeled biotin, the cofactor was shown to be incorporated into Arc1p by covalent and alkali-stable linkage. Similar to the known carboxylases, Arc1p biotinylation is mediated by the yeast biotin:protein ligase, Bpl1p. Mutational studies revealed that biotinylation occurs at lysine 86 within the N-terminal domain of Arc1p. In contrast to the known carboxylases, however, in vitro biotinylation of Arc1p is incomplete and increases with BPL1 overexpression. In accordance to this fact, Arc1p lacks the canonical consensus sequence of known biotin binding domains, and the bacterial biotin:protein ligase, BirA, is unable to use Arc1p as a substrate. Arc1p was shown previously to organize the association of MetRS and GluRS tRNA synthetases with their cognate tRNAs thereby increasing the substrate affinity and catalytic efficiency of these enzymes. Remarkably, not only biotinylated but also the biotin-free Arc1p obtained by replacement of lysine 86 with arginine were capable of restoring Arc1p function in both arc1Delta and arc1Deltalos1Delta mutants, indicating that biotinylation of Arc1p is not essential for activity.     

The polypeptide Syn67 interacts physically with human holocarboxylase synthetase, but is not a target for biotinylation

Holocarboxylase synthetase (HCS) catalyzes the binding of biotin to lysines in carboxylases and histones in two steps. First, HCS catalyzes the synthesis of biotinyl-5′-AMP; second, the biotinyl moiety is ligated to lysine residues. It has been proposed that step two is fairly promiscuous, and that protein biotinylation may occur in the absence of HCS as long as sufficient exogenous biotinyl-5′-AMP is provided. Here, we identified a novel polypeptide (Syn67) with a basic patch of lysines and arginines. Yeast-two-hybrid assays and limited proteolysis assays revealed that both N- and C-termini of HCS interact with Syn67. A potential target lysine in Syn67 was biotinylated by HCS only after arginine-to-glycine substitutions in Syn67 produced a histone-like peptide. We identified a Syn67 docking site near the active pocket of HCS by in silico modeling and site-directed mutagenesis. Biotinylation of proteins by HCS is more specific than previously assumed.     

Structure and selectivity in post-translational modification: attaching the biotinyl-lysine and lipoyl-lysine swinging arms in multifunctional enzymes.

The post-translational attachment of biotin and lipoic acid to specific lysine residues displayed in protruding beta-turns in homologous biotinyl and lipoyl domains of their parent enzymes is catalysed by two different ligases. We have expressed in Escherichia coli a sub-gene encoding the biotinyl domain of E.coli acetyl-CoA carboxylase, and by a series of mutations converted the protein from the target for biotinylation to one for lipoylation, in vivo and in vitro. The biotinylating enzyme, biotinyl protein ligase (BPL), and the lipoylating enzyme, LplA, exhibited major differences in the recognition process. LplA accepted the highly conserved MKM motif that houses the target lysine residue in the biotinyl domain beta-turn, but was responsive to structural cues in the flanking beta-strands. BPL was much less sensitive to changes in these beta-strands, but could not biotinylate a lysine residue placed in the DKA motif characteristic of the lipoyl domain beta-turn. The presence of a further protruding thumb between the beta2 and beta3 strands in the wild-type biotinyl domain, which has no counterpart in the lipoyl domain, is sufficient to prevent aberrant lipoylation in E.coli. The structural basis of this discrimination contrasts with other forms of post-translational modification, where the sequence motif surrounding the target residue can be the principal determinant.