Expression of beta-lactamase in Coxiella burnetii transformants

Coxiella burnetii can be transformed to ampicillin resistance by electroporation with plasmids encoding beta-lactamase. However, non-plasmid emergence of resistance to ampicillin also develops. To validate the usefulness of the bla gene marker for selection and detection, transformed C. burnetii were examined for beta-lactamase expression by use of immunoblotting after SDS-PAGE. The 29-kDa mature form of the beta-lactamase protein was detected in C. burnetii lysates. Quantitation of these immunoblot signals showed that C. burnetii surprisingly expressed low levels of beta-lactamase. The results validate the use of plasmid-encoded ampicillin resistance as a means for selecting C. burnetii transformants; they also suggest that levels of ampicillin used for selection pressure should be empirically determined and that detection of beta-lactamase by antibody blotting done to confirm transformants.     

The minimal replicon of a Streptomycete plasmid produces an ultrahigh level of plasmid DNA

A functional map of Streptomyces coelicolor plasmid SCP2* was deduced from derivatives constructed by in vitro deletions. Functions were analyzed on bifunctional shuttle plasmids that contained pBR322 for selection and replication in Escherichia coli and fragments of SCP2* for replication in Streptomyces griseofuscus C581 and strains of Streptomyces lividans. The aph gene for neomycin resistance from Streptomyces fradiae and the tsr gene for thiostrepton resistance from Streptomyces azureus were incorporated as selectable antibiotic resistance markers in streptomycetes. An 11.8-kb sequence bounded by EcoRI and KpnI restriction sites contains the information for self-transfer and normal replication of the plasmid. A 5.9-kb EcoRI-SalI fragment contains all of the information for normal replication. Partial digestion generated a 2.2-kb Sau3A fragment that is sufficient for replication but it produces ten times higher plasmid copy number than the basic replicon. pHJL400 and PHJL401 are useful shuttle vectors containing the moderate-copy-number streptomycete plasmid combined with the E. coli plasmid pUC19. A 1.4-kb BclI-Sau3A fragment with an additional internal BclI site contains the minimal replicon but it produces 1000 times higher plasmid copy number than the basic replicon. pHJL302 is a useful shuttle vector containing the ultrahigh-copy-number streptomycete plasmid combined with the E. coli plasmid pUC19.     

Integrative and free Spiroplasma citri oriC plasmids: expression of the Spiroplasma phoeniceum spiralin in Spiroplasma citri.

The replication region (oriC) of the Spiroplasma citri chromosome has been recently sequenced, and a 2-kbp DNA fragment was characterized as an autonomously replicating sequence (F. Ye, J. Renaudin, J. M. Bové, and F. Laigret, Curr. Microbiol. 29:23-29, 1994). In the present studies, we have combined this DNA fragment, containing the dnaA gene and the flanking dnaA boxes, with a ColE1-derived Escherichia coli replicon and the Tet M determinant, which confers resistance to tetracycline. The recombinant plasmid, named pBOT1, was introduced into S. citri cells, in which it replicated. Plasmid pBOT1 was shuttled from E. coli to S. citri and back to E. coli. In S. citri, replication of pBOT1 did not require the presence of a functional dnaA gene on the plasmid. However, the dnaA box region downstream of the dnaA gene was essential. Upon passaging of the S. citri transformants, the plasmid integrated into the spiroplasmal host chromosome by recombination at the replication origin. The integration process led to duplication of the oriC sequences. In contrast to the integrative pBOT1, plasmid pOT1, which does not contain the E. coli replicon, was stably maintained as a free extrachromosomal element. Plasmid pOT1 was used as a vector to introduce into S. citri the G fragment of the cytadhesin P1 gene of Mycoplasma pneumoniae and the spiralin gene of Spiroplasma phoeniceum. The recombinant plasmids, pOTPG with the G fragment and pOTPS with the spiralin gene, were stably maintained in spiroplasmal transformants. Expression of the heterologous S. phoeniceum spiralin in S. citri was demonstrated by Western immunoblotting.     

Construction of an Escherichia coli-Rhodococcus shuttle vector and plasmid transformation in Rhodococcus spp.

A plasmid transformation system for Rhodococcus sp. strain H13-A was developed by using an Escherichia coli-Rhodococcus shuttle plasmid constructed in this study. Rhodococcus sp. strain H13-A contains three cryptic indigenous plasmids, designated pMVS100, pMVS200, and pMVS300, of 75, 19.5, and 13.4 kilobases (kb), respectively. A 3.8-kb restriction fragment of pMVS300 was cloned into pIJ30, a 6.3-kb pBR322 derivative, containing the E. coli origin of replication (ori) and ampicillin resistance determinant (bla), as well as a Streptomyces gene for thiostrepton resistance, tsr. The resulting 10.1-kb recombinant plasmid, designated pMVS301, was isolated from E. coli DH1(pMVS301) and transformed into Rhodococcus sp. strain AS-50, a derivative of strain H13-A, by polyethylene glycol-assisted transformation of Rhodococcus protoplasts and selection for thiostrepton-resistant transformants. Thiostrepton-resistant transformants were also ampicillin resistant and were shown to contain pMVS301, which was subsequently isolated and transformed back into E. coli. The cloned 3.8-kb fragment of Rhodococcus DNA in pMVS301 contains a Rhodococcus origin of replication, since the hybrid plasmid was capable of replication in both genera. The plasmid was identical in E. coli and Rhodococcus transformants as determined by restriction analysis and was maintained as a stable, independent replicon in both organisms. Optimization of the transformation procedure resulted in transformation frequencies in the range of 10(5) transformants per micrograms of pMVS301 DNA in Rhodococcus sp. strain H13-A and derivative strains. The plasmid host range extends to strains of Rhodococcus erythropolis, R. globulerus, and R. equi, whereas stable transformants were not obtained with R. rhodochrous or with several coryneform bacteria tested as recipients. A restriction map demonstrated 14 unique restriction sites in pMVS301, some of which are potentially useful for molecular cloning in Rhodococcus spp. and other actinomycetes. This is the first report of plasmid transformation and of heterologous gene expression in a Rhodococcus sp.     

Introduction of single-copy sequences into the chromosome of Escherichia coli: application to gene and operon fusions.

We have developed a general method for the introduction of any cloned sequence into the chromosome of Escherichia coli. This method employs an Hfr strain which carries a fragment of bla (the pBR322 gene imparting ampicillin resistance) between lacI and lacZ. Plasmid-borne inserts which are flanked by sequences from bla and lacZ can be introduced at this locus by homologous recombination. The isolation of recombinants is enhanced by selection for transfer of an integrated copy of the plasmid during conjugation. Once introduced into the chromosome, the inserted sequences can be transferred to other strains by conventional methods such as P1 transduction or conjugation. This method is suitable for the transfer of any cloned sequence to the chromosome and is particularly well suited to the construction of chromosomal gene and operon fusions with lacZ.     

Influence of different functional elements of plasmid pGT232 on maintenance of recombinant plasmids in Lactobacillus reuteri populations in vitro and in vivo

Plasmid pGT232 (5.1 kb), an indigenous plasmid of Lactobacillus reuteri 100-23, was determined, on the basis of nucleotide and deduced protein sequence data, to belong to the pC194-pUB110 family of plasmids that replicate via the rolling-circle mechanism. The minimal replicon of pGT232 was located on a 1.7-kb sequence consisting of a double-strand origin of replication and a gene encoding the replication initiation protein, repA. An erythromycin-selectable recombinant plasmid containing this minimal replicon was stably maintained (>97% erythromycin-resistant cells) without antibiotic selection in an L. reuteri population under laboratory growth conditions but was poorly maintained (<33% resistant cells) in the L. reuteri population inhabiting the murine gastrointestinal tract. Stable maintenance (>90% resistant cells) of pGT232-derived plasmids in the lactobacillus population in vivo required an additional 1.0-kb sequence which contained a putative single-strand replication origin (SSO). The SSO of pGT232 is believed to be novel and functions in an orientation-specific manner.     

Cloning of the replication region on the bacteriocinogenic plasmid pRJ9 of Staphylococcus aureus

Abstract A 5.8-kb Cla I fragment of pRJ9, a bacteriocinogenic plasmid of Sphylococcus aureus , was cloned in the unique Cla I site of pRJ5. The recombinant plasmid obtained, pRJ23, failed to confer bacteriocin production and immunity to bacteriocin on host cells. The cloned fragment was shown to contain the complete replicon of pRJ9. Attempts to clone the 4.4-kb Cla I fragment of pRJ9 were unsuccessful, apparently due to the inactivation of the basic replicon of the cloning vector. Therefore, plasmid pRJ5 cut at its Cla I site appears to be a suitable vector for cloning replication regions of plasmids that cab replicate in S. aureus .     

Sequencing and characterization of the cryptic plasmid QpRS from Coxiella burnetii

Plasmid QpRS from Coxiella burnetii, isolate Priscilla Q177, phase I, has been completely sequenced. DNA for sequencing was amplified with "extra-long" (XL) PCR. The size of the QpRS plasmid sequence was determined to be 39,280 bp, with a G + C content of 39.3%. Putative proteins associated with replication and recombination were identified. The sequence of QpRS plasmid was analyzed for shared and unique regions among C. burnetii plasmids.     

Influence of Different Functional Elements of Plasmid pGT232 on Maintenance of Recombinant Plasmids in Lactobacillus reuteri Populations In Vitro and In Vivo

Plasmid pGT232 (5.1 kb), an indigenous plasmid of Lactobacillus reuteri 100-23, was determined, on the basis of nucleotide and deduced protein sequence data, to belong to the pC194-pUB110 family of plasmids that replicate via the rolling-circle mechanism. The minimal replicon of pGT232 was located on a 1.7-kb sequence consisting of a double-strand origin of replication and a gene encoding the replication initiation protein, repA. An erythromycin-selectable recombinant plasmid containing this minimal replicon was stably maintained (>97% erythromycin-resistant cells) without antibiotic selection in an L. reuteri population under laboratory growth conditions but was poorly maintained (<33% resistant cells) in the L. reuteri population inhabiting the murine gastrointestinal tract. Stable maintenance (>90% resistant cells) of pGT232-derived plasmids in the lactobacillus population in vivo required an additional 1.0-kb sequence which contained a putative single-strand replication origin (SSO). The SSO of pGT232 is believed to be novel and functions in an orientation-specific manner.     

Properties and construction of plasmid pFW213, a shuttle vector with the oral Streptococcus origin of replication

Streptococcus parasanguinis is among the most successful colonizers of the human body. Strain FW213 harbors a 7.0-kb cryptic plasmid, pFW213, with a copy number at 5 to 10 per chromosome. Sequence and functional analyses of pFW213 revealed that the open reading frame (ORF) encoding the replication protein (Rep) is essential for the replication of pFW213, and the putative plasmid addiction system (RelB and RelE) and an ORF (ORF6) with no known function are required for its stability. The minimal replicon of pFW213 contains the rep gene and its 5'-flanking 390-bp region. Within the minimal replicon, an A/T-rich region followed by 5 contiguous 22-bp repeats was located 5' of the ATG of rep. No single-stranded replication intermediates were detected in the derivatives of pFW213, suggesting that pFW213 replicates via the theta replication mechanism. The minimal replicon was unstable in streptococcal hosts without selection, but the stability was greatly enhanced in derivatives containing the intact relBE genes. A Streptococcus-Escherichia coli shuttle vector, pCG1, was constructed with the pFW213 replicon. Plasmid pCG1 features a multiple cloning region and a spectinomycin resistance determinant that is expressed in both Streptococcus spp. and E. coli. Various streptococcal DNA fragments were cloned in pCG1, and the recombinant constructs were stably maintained in the streptococcal hosts. Since pCG1 is compatible with the most widely used streptococcal replicon, pVA380-1, pCG1 will provide a much needed tool allowing the cloning of two genes that work in concert in the same host.     

Cloning and amplified expression in Streptomyces lividans of a gene encoding extracellular beta-lactamase from Streptomyces albus G

A 4.9-kb DNA fragment containing the bla gene for the extracellular beta-lactamase (BLA) of Streptomyces albus G was cloned in Streptomyces lividans using the conjugative, low-copy-number plasmid pIJ61 as vector. No expression of bla was observed when this DNA fragment was introduced into Escherichia coli HB101 on a plasmid vector. A 1.5-kb PstI-SstI fragment containing the bla gene was cloned in S. lividans on the nonconjugative, high-copy-number plasmid pIJ702. A tenfold higher yield of BLA was obtained from S. lividans carrying this plasmid than from S. albus G grown under optimal production conditions. The BLA from the clone reacts with beta-iodopenicillanate according to a branched pathway which is characteristic of the original S. albus G BLA enzyme.     

High-efficiency gene inactivation and replacement system for gram-positive bacteria.

A system for high-efficiency single- and double-crossover homologous integration in gram-positive bacteria has been developed, with Lactococcus lactis as a model system. The system is based on a thermosensitive broad-host-range rolling-circle plasmid, pG+host5, which contains a pBR322 replicon for propagation in Escherichia coli at 37 degrees C. A nested set of L. lactis chromosomal fragments cloned onto pG+host5 were used to show that the single-crossover integration frequency was logarithmically proportional to the length of homology for DNA fragments between 0.35 and 2.5 kb. Using random chromosomal 1-kb fragments, we showed that homologous integration can occur along the entire chromosome. We made use of the reported stimulatory effect of rolling-circle replication on intramolecular recombination to develop a protocol for gene replacement. Cultures were first maintained at 37 degrees C to select for a bacterial population enriched for plasmid integrants; activation of the integrated rolling-circle plasmid by a temperature shift to 28 degrees C resulted in efficient plasmid excision by homologous recombination and replacement of a chromosomal gene by the plasmid-carried modified copy. More than 50% of cells underwent replacement recombination when selection was applied for the replacing gene. Between 1 and 40% of cells underwent replacement recombination when no selection was applied. Chromosomal insertions and deletions were obtained in this way. These results show that gene replacement can be obtained at an extremely high efficiency by making use of the thermosensitive rolling-circle nature of the delivery vector. This procedure is applicable to numerous gram-positive bacteria.     

Characterization of a mini-F plasmid derived from an F mutant expressing incompatibility in the autonomous but not in the integrated state

Plasmid DNA from Escherichia coli F' ser/MA219 harboring an altered F' factor, which expressed incompatibility in the autonomous but not in the integrated state (DeVries and Maas, 1973, J. Bacteriol. 115, 213-220), was digested with the restriction endonuclease EcoRI and ligated to a nonreplicating trpED fragment. A miniplasmid was obtained containing a 5.7-kb EcoRI fragment capable of self-replication. This plasmid, designated pRE300, was incompatible with mini-F as well as with ColE1 derivatives. It represents a cointegrate formed in vivo between a 2.2-kb segment of the F replication region and a ColE1-type replicon of unknown derivation. The F-derived component of pRE300 corresponds to a minimalized F replicon (43.85-46.05 kb F) retaining oriII and the incB locus but missing the incC and incD functions. It is postulated that the Inc- mutation resulted from the insertion of a transposable DNA sequence into the incC locus of the parent F plasmid.     

pUb6060: a broad-host-range, DNA polymerase-I-independent ColE2-like plasmid

A ColE2-like, cryptic plasmid, pUB6060, of 5.8 kb has been found in a clinical isolate of Plesiomonas shigelloides. The complete sequence of pUB6060 has been determined and reveals a number of interesting features about the plasmid. The ColE2-like replication locus is linked to a functional ColE1-like mobilization locus. Replication is, unusually for ColE2 replicons, DNA polymerase-I-independent and may involve two, rather than the usual one, plasmid-encoded functions. Additionally, it carries two ORFs encoding products of unknown function. The pUB6060 replicon maintains a moderate plasmid copy number (10 per chromosome copy) and permits replication in diverse gram-negative bacteria.     

A facile and reversible method to decrease the copy number of the ColE1-related cloning vectors commonly used in Escherichia coli.

We report a technique which uses the cointegrate intermediate of transposon Tn1000 transposition as a means to lower the copy number of ColE1-type plasmids. The transposition of Tn1000 from one replicon to another is considered a two-step process. In the first step, the transposon-encoded TnpA protein mediates fusion of the two replicons to produce a cointegrate. In the second step, the cointegrate is resolved by site-specific recombination between the two transposon copies to yield the final transposition products: the target replicon with an integrated transposon plus the regenerated donor replicon. Using in vitro techniques, the DNA sequence of the Tn1000 transposon was altered so that cointegrate formation occurs but resolution by the site-specific recombination pathway is blocked. When this transposon was resident on an F factor-derived plasmid, a cointegrate was formed between a multicopy ColE1-type target plasmid and the conjugative F plasmid. Conjugational transfer of this cointegrate into a polA strain resulted in a stable cointegrate in which replication from the ColE1 plasmid origin was inhibited and replication proceeded only from the single-copy F factor replication origin. We assayed isogenic strains which harbored plasmids encoding chloramphenicol acetyltransferase to measure the copy number of such F factor-ColE1-type cointegrate plasmids and found that the copy number was decreased to the level of single-copy chromosomal elements. This method was used to study the effect of copy number on the expression of the fabA gene (which encodes the key fatty acid-biosynthetic enzyme beta-hydroxydecanoylthioester dehydrase) by the regulatory protein encoded by the fadR gene.     

Analysis of a region in plasmid R386 containing two functional replicons

A miniplasmid has been obtained from R386 by ligating EcoRI fragments with a fragment carrying a kanamycin-resistance gene. It contains a 6.8-kb Eco fragment of R386 which hybridizes strongly with several IncFI plasmid DNAs but not with the primary or secondary replicons of the F plasmid. This mini-R386 is incompatible with certain IncFI plasmids, and it appears to be one example of a previously unidentified replicon widely distributed in the IncFI group. A region of R386 not closely linked to the 6.8-kb fragment is involved in copy number control of the mini-R386, and a sequence in the same region interacts with mini-F partition functions to cause incompatibility. The 6.8-kb fragment also restricts growth of T7 bacteriophage, and an adjacent fragment restricts phage T4 growth. A further R386 sequence, sharing homology with the F secondary replicon, is capable of autonomous replication. Hence R386, like F, contains at least two functional replicons.     

Genes and regulatory sequences of bacteriophage ∅X174

Fragments of the DNA of bacteriophage ∅X174 were inserted in the plasmids pACYC177 and pBR322, in order to test the in vivo effects of separate phage genes and regulatory sequences. The ∅X174 inserts were identified by recombination and complementation with phage mutants, followed by restriction enzyme analysis. The genes B, C, F and G can be maintained stably in the cell even when there is efficient expression of these viral genes. Recombinant plasmids with the complete genes D and E can only be maintained when the expression of these genes is completely blocked. Expression of complete H and J genes could not yet be demonstrated. The intact gene A was apparently lethal for the host cell, as it was never found in the recombinants. The genes F and G are expressed, even when they are not preceded by one of the well characterized viral or plasmid promoter sequences. Screening of the nucleotide sequence of ∅X174 gives two promoter-like sequences just in front of the two genes. Viral sequences with replication signals (the ∅X174 (+) origin of replication, the initiation site for complementary strand synthesis and the incompatibility sequence) appeared to be functional also when inserted in recombinant plasmids. A plasmid with the ∅X (+) origin can be forced to a rolling circle mode of replication. The A protein produced by infecting phages works in trans on the cloned viral origin. The (−) origin can function as initiation signal for complementary strand synthesis during transduction of single-stranded plasmid DNA. The intracellular presence of the incompatibility sequence on a plasmid prevents propagation of infecting phages.     

Location of rep and inc sequences in the F secondary replicon

Miniplasmids derived by deletion of DNA from the F plasmid secondary replicon have been tested for the ability to replicate and to express incompatibility with the IncFI plasmid, ColV3-K30. The results demonstrate that the minimal rep region of the secondary replicon lies within a 1.9-kb sequence (33.7F-35.6F kb), and that an inc region, presumably involved in replication control, is present in a 0.45-kb portion of the rep region (33.7F-34.15F kb). In addition, the secondary replicon was found not to require DNA polymerase I activity.     

Replication Mechanism and Sequence Analysis of the Replicon of pAW63, a Conjugative Plasmid from Bacillus thuringiensis

A 5.8-kb fragment of the large conjugative plasmid pAW63 from Bacillus thuringiensis subsp. kurstaki HD73 containing all the information for autonomous replication was cloned and sequenced. By deletion analysis, the pAW63 replicon was reduced to a 4.1-kb fragment harboring four open reading frames (ORFs). Rep63A (513 amino acids [aa]), encoded by the largest ORF, displayed strong similarity (40% identity) to the replication proteins from plasmids pAMbeta1, pIP501, and pSM19035, indicating that the pAW63 replicon belongs to the pAMbeta1 family of gram-positive theta-replicating plasmids. This was confirmed by the facts that no single-stranded DNA replication intermediates could be detected and that replication was found to be dependent on host-gene-encoded DNA polymerase I. An 85-bp region downstream of Rep63A was also shown to have strong similarity to the origins of replication of pAMbeta1 and pIP501, and it is suggested that this region contains the bona fide pAW63 ori. The protein encoded by the second large ORF, Rep63B (308 aa), was shown to display similarity to RepB (34% identity over 281 aa) and PrgP (32% identity over 310 aa), involved in copy control of the Enterococcus faecalis plasmids pAD1 and pCF10, respectively. No significant similarity to known proteins or DNA sequences could be detected for the two smallest ORFs. However, the location, size, hydrophilicity, and orientation of ORF6 (107 codons) were analogous to those features of the putative genes repC and prgO, which encode stability functions on plasmids pAD1 and pCF10, respectively. The cloned replicon of plasmid pAW63 was stably maintained in Bacillus subtilis and B. thuringiensis and displayed incompatibility with the native pAW63. Hybridization experiments using the cloned replicon as a probe showed that pAW63 has similarity to large plasmids from other B. thuringiensis subsp. kurstaki strains and to a strain of B. thuringiensis subsp. alesti.     

New method for generating deletions and gene replacements in Escherichia coli.

We describe a method for generating gene replacements and deletions in Escherichia coli. The technique is simple and rapid and can be applied to most genes, even those that are essential. What makes this method unique and particularly effective is the use of a temperature-sensitive pSC101 replicon to facilitate the gene replacement. The method proceeds by homologous recombination between a gene on the chromosome and homologous sequences carried on a plasmid temperature sensitive for DNA replication. Thus, after transformation of the plasmid into an appropriate host, it is possible to select for integration of the plasmid into the chromosome at 44 degrees C. Subsequent growth of these cointegrates at 30 degrees C leads to a second recombination event, resulting in their resolution. Depending on where the second recombination event takes place, the chromosome will either have undergone a gene replacement or retain the original copy of the gene. The procedure can also be used to effect the transfer of an allele from a plasmid to the chromosome or to rescue a chromosomal allele onto a plasmid. Since the resolved plasmid can be maintained by selection, this technique can be used to generate deletions of essential genes.