Purification and biochemical characterization of phenylacetyl-CoA ligase from Pseudomonas putida. A specific enzyme for the catabolism of phenylacetic acid

A new enzyme, phenylacetyl-CoA ligase (AMP-forming) (PA-CoA ligase, EC 6.2.1-) involved in the catabolism of phenylacetic acid (PAA) in Pseudomonas putida is described and characterized. PA-CoA ligase was specifically induced by PAA when P. putida was grown in a chemically defined medium in which phenylacetic acid was the sole carbon source. Hydroxyl, methyl-phenylacetyl derivatives, and other PAA close structural molecules did not induce the synthesis of this enzyme and neither did acetic, butyric, succinic, nor fatty acids (greater than C5 atoms carbon length). PA-CoA ligase requires ATP, CoA, PAA, and MgCl2 for its activity. The maximal rate of catalysis was achieved in 50 mM HCl/Tris buffer, pH 8.2, at 30 degrees C and under these conditions, the Km calculated for ATP, CoA, and PAA were 9.7, 1.0, and 16.5 mM, respectively. The enzyme is inhibited by some divalent cations (Cu2+, Zn2+, and Hg2+) and by the sulfhydryl reagents N-ethylmaleimide, 5,5'-dithiobis(2-nitrobenzoic acid), and p-chloromercuribenzoate. PA-CoA ligase was purified to homogeneity (513-fold). It runs as a single polypeptide in 12% sodium dodecyl sulfate-polyacrylamide gel electrophoresis and has a molecular mass of 48 +/- 1 kDa. PA-CoA ligase does not use as substrate either 3-hydroxyphenylacetic, 4-hydroxyphenylacetic, or 3,4-dihydroxyphenylacetic acids and shows a substrate specificity different from other acyl-CoA-activating enzymes. The enzyme is detected in P. putida from the early logarithmic phase of growth and is repressed by glucose, suggesting that PA-CoA ligase is a specific enzyme involved in the utilization of PAA as energy source.     

Substrate specificity of penicillin acylase from Streptomyces lavendulae

The kinetic parameters of several substrates of penicillin acylase from Streptomyces lavendulae have been determined. The enzyme hydrolyses phenoxymethyl penicillin (penicillin V) and other penicillins with aliphatic acyl-chains such as penicillin F, dihydroF, and K. The best substrate was penicillin K (octanoyl penicillin) with a k(cat)/K(m) of 165.3 mM(-1) s(-1). The enzyme hydrolyses also chromogenic substrates as NIPOAB (2-nitro-5-phenoxyacetamido benzoic acid), NIHAB (2-nitro-5-hexanoylamido benzoic acid) or NIOAB (2-nitro-5-octanoylamido benzoic acid), however failed to hydrolyse phenylacetil penicillin (penicillin G) or NIPAB (2-nitro-5-phenylacetamido benzoic acid) and penicillins with polar substituents in the acyl moiety. These results suggest that the structure of the acyl moiety of the substrate is more determinant than the amino moiety for enzyme specificity. The enzyme was inhibited by several organic acids and the extent of inhibition changed with the hydrophobicity of the acid. The best inhibitor was octanoic acid with a K(i) of 0.8 mM. All the results, taking together, point to an active site highly hydrophobic for this penicillin acylase from Streptomyces lavendulae.     

A Streptomyces collinus thiolase with novel acetyl-CoA:acyl carrier protein transacylase activity

Acetyl-CoA:acyl carrier protein (ACP) transacylase (ACT) activity has been demonstrated for the 3-ketoacyl-ACP synthase III (KASIII) which initiates fatty acid biosynthesis in the type II dissociable fatty acid synthases of plants and bacteria. Several lines of evidence have indicated the possibility of ACT activity being associated with proteins other than KASIII. Using a crude extract of Streptomyces collinus, we have resolved from KASIII an additional protein with ACT activity and subsequently purified it 85-fold in five chromatographic steps. The 45 kDa protein was shown by gel filtration to have a molecular mass of 185 +/- 35 kDa, consistent with a homotetrameric structure for the native enzyme. The corresponding gene (fadA) was cloned and sequenced and shown to encode a protein with amino acid sequence homology to type II thiolases. The fadA was expressed in Escherichia coli, and the resulting recombinant FadA enzyme purified by metal chelate chromatography was shown to have both ACT and thiolase activities. Kinetic studies revealed that in an ACT assay FadA had a substrate specificity for a two-carbon acetyl-CoA substrate (K(m) 8.7 +/- 1.4 microM) but was able to use ACPs from both type II fatty acid and polyketide synthases (Streptomyces glaucescens FabC ACP, K(m) 10.7 +/- 1.4 microM; E. coli FabC ACP, K(m) 8.8 +/- 2 microM; FrenN ACP, K(m) 44 +/- 12 microM). In the thiolase assay kinetic analyses revealed similar K(m) values for binding of substrates acetoacetyl-CoA (K(m) 9.8 +/- 0.8 microM) and CoA (K(m) 10.9 +/- 1.8 microM). A Cys92Ser mutant of FadA possessed virtually unchanged K(m) values for acetoacetyl-CoA and CoA but had a greater than 99% decrease in k(cat) for the thiolase activity. No detectable ACT activity was observed for the Cys92Ser mutant, demonstrating that both activities are associated with FadA and likely involve formation of the same covalent acetyl-S-Cys enzyme intermediate. An ACT activity with ACP has not previously been observed for thiolases and in the case of the S. collinus FadA is significantly lower (k(cat) 3 min(-1)) than the thiolase activity of FadA (k(cat) 2170 min(-1)). The ACT activity of FadA is comparable to the KAS activity and significantly higher than the ACT activity, reported for a streptomycete KASIII.     

Enzyme-coupled assay for beta-xylosidase hydrolysis of natural substrates

We describe here a new enzyme-coupled assay for the quantitation of d-xylose using readily available enzymes that allows kinetic evaluation of hemicellulolytic enzymes using natural xylooligosaccharide substrates. Hydrogen peroxide is generated as an intermediary analyte, which allows flexibility in the choice of the chromophore or fluorophore used as the final reporter. Thus, we present d-xylose quantitation results for solution-phase assays performed with both the fluorescent reporter resorufin, generated from N-acetyl-3,7-dihydroxyphenoxazine (Amplex Red), and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate) (ABTS), whose corresponding radical cation has an absorbance maximum at approximately 400 nm. We also describe a useful solid-phase variation of the assay performed with the peroxidase substrate 3,3'-diaminobenzidine tetrahydrochloride, which produces an insoluble brown precipitate. In addition, kinetic parameters for hydrolysis of the natural substrates xylobiose and xylotriose were obtained using this assay for a glycosyl hydrolase family 39 beta-xylosidase from Thermoanaerobacterium sp. strain JW/SL YS485 (Swiss-Prot accession no. O30360). At higher xylobiose substrate concentrations the enzyme showed an increase in the rate indicative of transglycosylation, while for xylotriose marked substrate inhibition was observed. At lower xylobiose concentrations k(cat) was 2.7 +/- 0.4 s(-1), K(m) was 3.3 +/- 0.7 mM, and k(cat)/K(m) was 0.82 +/- 0.21 mM(-1) . s(-1). Nonlinear curve fitting to a substrate inhibition model showed that for xylotriose K(i) was 1.7 +/- 0.1 mM, k(cat) was 2.0 +/- 0.1 s(-1), K(m) was 0.144 +/- 0.011 mM, and k(cat)/K(m) was 14 +/- 1.3 mM(-1) . s(-1).     

Synthesis and hydrolysis by cysteine and serine proteases of short internally quenched fluorogenic peptides

We developed sensitive substrates for cysteine proteases and specific substrates for serine proteases based on short internally quenched fluorescent peptides, Abz-F-R-X-EDDnp, where Abz (ortho-aminobenzoic acid) is the fluorescent donor, EDDnp [N-(ethylenediamine)-2,4-dinitrophenyl amide] is the fluorescent quencher, and X are natural amino acids. This series of peptides is compared to the commercially available Z-F-R-MCA, where Abz and X replace carbobenzoxy (Z) and methyl-7-aminocoumarin amide (MCA), respectively; and EDDnp can be considered a P(2)' residue. Whereas MCA is the fluorescent probe and cannot be modified, in the series Abz-F-R-X-EDDnp the amino acids X give the choice of matching the specificity of the S(1)' enzyme subsite, increasing the substrate specificity for a particular protease. All Abz-F-R-X-EDDnp synthesized peptides (for X = Phe, Leu, Ile, Ala, Pro, Gln, Ser, Lys, and Arg) were assayed with papain, human cathepsin L and B, trypsin, human plasma, and tissue kallikrein. Abz-F-R-L-EDDnp was the best substrate for papain and Abz-F-R-R-EDDnp or Abz-F-R-A-EDDnp was the more susceptible to cathepsin L. Abz-F-R-L-EDDnp was able to detect papain in the range of 1 to 15 pM. Human plasma kallikrein hydrolyzed Abz-F-R-R-EDDnp with significant efficiency (k(cat)/K(m) = 1833 mM(-1) s(-1)) and tissue kallikrein was very selective, hydrolyzing only the peptides Abz-F-R-A-EDDnp (k(cat)/K(m) = 2852 mM(-1) s(-1)) and Abz-F-R-S-EDDnp (k(cat)/K(m) = 4643 mM(-1) s(-1)). All Abz-F-R-X-EDDnp peptides were resistant to hydrolysis by thrombin and activated factor X.     

Characterization of an arginine:pyruvate transaminase in arginine catabolism of Pseudomonas aeruginosa PAO1

The arginine transaminase (ATA) pathway represents one of the multiple pathways for L-arginine catabolism in Pseudomonas aeruginosa. The AruH protein was proposed to catalyze the first step in the ATA pathway, converting the substrates L-arginine and pyruvate into 2-ketoarginine and L-alanine. Here we report the initial biochemical characterization of this enzyme. The aruH gene was overexpressed in Escherichia coli, and its product was purified to homogeneity. High-performance liquid chromatography and mass spectrometry (MS) analyses were employed to detect the presence of the transamination products 2-ketoarginine and L-alanine, thus demonstrating the proposed biochemical reaction catalyzed by AruH. The enzymatic properties and kinetic parameters of dimeric recombinant AruH were determined by a coupled reaction with NAD(+) and L-alanine dehydrogenase. The optimal activity of AruH was found at pH 9.0, and it has a novel substrate specificity with an order of preference of Arg > Lys > Met > Leu > Orn > Gln. With L-arginine and pyruvate as the substrates, Lineweaver-Burk plots of the data revealed a series of parallel lines characteristic of a ping-pong kinetic mechanism with calculated V(max) and k(cat) values of 54.6 +/- 2.5 micrromol/min/mg and 38.6 +/- 1.8 s(-1). The apparent K(m) and catalytic efficiency (k(cat)/K(m)) were 1.6 +/- 0.1 mM and 24.1 mM(-1) s(-1) for pyruvate and 13.9 +/- 0.8 mM and 2.8 mM(-1) s(-1) for l-arginine. When L-lysine was used as the substrate, MS analysis suggested Delta(1)-piperideine-2-carboxylate as its transamination product. These results implied that AruH may have a broader physiological function in amino acid catabolism.     

Characterization of the regiochemistry and cryptoregiochemistry of a Caenorhabditis elegans fatty acid desaturase (FAT-1) expressed in Saccharomyces cerevisiae

To characterize the fatty acid desaturase produced by the fat-1 gene from the nematode Caenorhabditis elegans, the functional expression of this enzyme was effected in the yeast Saccharomyces cerevisiae. The GC-MS analysis of desaturated products derived from various fatty acids, including deuterium-labeled thia fatty acids supplied to growing cultures of transformed yeast, has defined the substrate requirements, regiochemistry, and cryptoregiochemistry of the enzyme. The desaturase acts on substrates of 16-20 carbons with a preference for omega-6 fatty acids, and its regioselectivity was confirmed to be that of an omega-3 desaturase. (omega-x refers to a double bond or desaturation between carbons x and x+1, counting from the methyl end of a fatty acid.) The primary deuterium kinetic isotope effects (KIEs) at C-15 and C-16 of a C18 fatty acid analogue were measured via competitive incubation experiments: While k(H)/k(D) at the omega-3 position was shown to be large (7.8 +/- 0.4), essentially no KIE at the omega-2 position was observed (k(H)/k(D) = 0.99 +/- 0.04). This result indicates that omega-3 desaturation is initiated by an energetically difficult C-H bond cleavage at the carbon closer to the carboxyl terminus. The results are discussed in the context of a general model relating the structure and function of membrane-bound fatty acid desaturases featuring differing regioselectivities.     

Selective neurotensin-derived internally quenched fluorogenic substrates for neurolysin (EC 3.4.24.16): comparison with thimet oligopeptidase (EC 3.4.24.15) and neprilysin (EC 3.4.24.11)

Internally quenched fluorescent peptides derived from neurotensin (pELYENKPRRPYIL) sequence were synthesized and assayed as substrates for neurolysin (EC 3.4.24.16), thimet oligopeptidase (EC 3.4.24.15 or TOP), and neprilysin (EC 3.4.24.11 or NEP). Abz-LYENKPRRPYILQ-EDDnp (where EDDnp is N-(2,4-dinitrophenyl)ethylenediamine and Abz is ortho-aminobenzoic acid) was derived from neurotensin by the introduction of Q-EDDnp at the C-terminal end of peptide and by the substitution of the pyroglutamic (pE) residue at N-terminus for Abz and a series of shorter peptides was obtained by deletion of amino acids residues from C-terminal, N-terminal, or both sides. Neurolysin and TOP hydrolyzed the substrates at P--Y or Y--I or R--R bonds depending on the sequence and size of the peptides, while NEP cleaved P-Y or Y-I bonds according to its S'(1) specificity. One of these substrates, Abz-NKPRRPQ-EDDnp was a specific and sensitive substrate for neurolysin (k(cat) = 7.0 s(-1), K(m) = 1.19 microM and k(cat)/K(m) = 5882 mM(-1). s(-1)), while it was completely resistant to NEP and poorly hydrolyzed by TOP and also by prolyl oligopeptidase (EC 3.4.21.26). Neurolysin concentrations as low as 1 pM were detected using this substrate under our conditions and its analogue Abz-NKPRAPQ-EDDnp was hydrolyzed by neurolysin with k(cat) = 14.03 s(-1), K(m) = 0.82 microM, and k(cat)/K(m) = 17,110 mM(-1). s(-1), being the best substrate so far described for this peptidase.     

Assay for glucose oxidase from Aspergillus niger and Penicillium amagasakiense by Fourier transform infrared spectroscopy

A simple and direct assay method for glucose oxidase (EC 1.1.3.4) from Aspergillus niger and Penicillium amagasakiense was investigated by Fourier transform infrared spectroscopy. This enzyme catalyzed the oxidation of d-glucose at carbon 1 into d-glucono-1,5-lactone and hydrogen peroxide in phosphate buffer in deuterium oxide ((2)H(2)O). The intensity of the d-glucono-1,5-lactone band maximum at 1212 cm(-1) due to CO stretching vibration was measured as a function of time to study the kinetics of d-glucose oxidation. The extinction coefficient epsilon of d-glucono-1,5-lactone was determined to be 1.28 mM(-1)cm(-1). The initial velocity is proportional to the enzyme concentration by using glucose oxidase from both A. niger and P. amagasakiense either as cell-free extracts or as purified enzyme preparations. The kinetic constants (V(max), K(m), k(cat), and k(cat)/K(m)) determined by Lineweaver-Burk plot were 433.78+/-59.87U mg(-1) protein, 10.07+/-1.75 mM, 1095.07+/-151.19s(-1), and 108.74 s(-1)mM(-1), respectively. These data are in agreement with the results obtained by a spectrophotometric method using a linked assay based on horseradish peroxidase in aqueous media: 470.36+/-42.83U mg(-1) protein, 6.47+/-0.85 mM, 1187.77+/-108.16s(-1), and 183.58 s(-1)mM(-1) for V(max), K(m), k(cat), and k(cat)/K(m), respectively. Therefore, this spectroscopic method is highly suited to assay for glucose oxidase activity and its kinetic parameters by using either cell-free extracts or purified enzyme preparations with an additional advantage of performing a real-time measurement of glucose oxidase activity.     

A novel amidase (half-amidase) for half-amide hydrolysis involved in the bacterial metabolism of cyclic imides

A novel amidase involved in bacterial cyclic imide metabolism was purified from Blastobacter sp. strain A17p-4. The enzyme physiologically functions in the second step of cyclic imide degradation, i.e., the hydrolysis of monoamidated dicarboxylates (half-amides) to dicarboxylates and ammonia. Enzyme production was enhanced by cyclic imides such as succinimide and glutarimide but not by amide compounds which are conventional substrates and inducers of known amidases. The purified amidase showed high catalytic efficiency toward half-amides such as succinamic acid (K(m) = 6.2 mM; k(cat) = 5.76 s(-1)) and glutaramic acid (K(m) = 2.8 mM; k(cat) = 2.23 s(-1)). However, the substrates of known amidases such as short-chain (C(2) to C(4)) aliphatic amides, long-chain (above C(16)) aliphatic amides, amino acid amides, aliphatic diamides, alpha-keto acid amides, N-carbamoyl amino acids, and aliphatic ureides were not substrates for the enzyme. Based on its high specificity toward half-amides, the enzyme was named half-amidase. This half-amidase exists as a monomer with an M(r) of 48,000 and was strongly inhibited by heavy metal ions and sulfhydryl reagents.     

Lysine-73 is involved in the acylation and deacylation of beta-lactamase

Lysine 73 is a conserved active-site residue in the class A beta-lactamases, as well as other members of the serine penicillin-sensitive enzyme family; its role in catalysis remains controversial and uncertain. Mutation of Lys73 to alanine in the beta-lactamase from Bacillus licheniformis resulted in a substantial reduction in both turnover rate (k(cat)) and catalytic efficiency (k(cat)/K(m)), and a very significant shift in pK(1) to higher pH in the bell-shaped pH-rate profiles (k(cat)/K(m)) for several penicillin and cephalosporin substrates. The increase in pK(1) is consistent with the removal of the positive ammonium group of the lysine from the proximity of Glu166, to which the acid limb has been ascribed. The alkaline limb of the k(cat)/K(m) vs profiles is not shifted appreciably, as might have been expected if this limb reflected the ionization of Lys73 in the wild-type enzyme. The k(cat)/K(m) at the pH optimum for the mutant was down about 200-fold for penicillins and around 10(4) for cephalosporins, compared to the wild-type, suggesting significant differences in the mechanisms for catalysis of penicillins compared to cephalosporins. Burst kinetics were observed with several substrates assayed with K73A beta-lactamase, indicating an underlying branched-pathway kinetic scheme, and rate-limiting deacylation. FTIR analysis was used to determine whether acylation or deacylation was rate-limiting. In general, acylation was the rate-limiting step for cephalosporin substrates, whereas deacylation was rate-limiting for penicillin substrates. The results indicate that Lys73 plays an important role in both the acylation and deacylation steps of the catalytic mechanism. The effects of this mutation (K73A) indicate that Lys73 does not function as a general base in the catalytic mechanism of beta-lactamase. The existence of bell-shaped pH-rate profiles for the K73A variant suggests that Lys73 is not directly responsible for either limb in such plots. It is likely that both Glu166 and Lys73 are important to each other in terms of maintaining the optimum electrostatic environment for fully efficient catalytic activity to occur.     

Biochemical evidence for an editing role of thioesterase II in the biosynthesis of the polyketide pikromycin

The pikromycin biosynthetic gene cluster contains the pikAV gene encoding a type II thioesterase (TEII). TEII is not responsible for polyketide termination and cyclization, and its biosynthetic role has been unclear. During polyketide biosynthesis, extender units such as methylmalonyl acyl carrier protein (ACP) may prematurely decarboxylate to generate the corresponding acyl-ACP, which cannot be used as a substrate in the condensing reaction by the corresponding ketosynthase domain, rendering the polyketide synthase module inactive. It has been proposed that TEII may serve as an "editing" enzyme and reactivate these modules by removing acyl moieties attached to ACP domains. Using a purified recombinant TEII we have tested this hypothesis by using in vitro enzyme assays and a range of acyl-ACP, malonyl-ACP, and methylmalonyl-ACP substrates derived from either PikAIII or the loading didomain of DEBS1 (6-deoxyerythronolide B synthase; AT(L)-ACP(L)). The pikromycin TEII exhibited high K(m) values (>100 microm) with all substrates and no apparent ACP specificity, catalyzing cleavage of methylmalonyl-ACP from both AT(L)-ACP(L) (k(cat)/K(m) 3.3 +/- 1.1 m(-1) s(-1)) and PikAIII (k(cat)/K(m) 2.9 +/- 0.9 m(-1) s(-1)). The TEII exhibited some acyl-group specificity, catalyzing hydrolysis of propionyl (k(cat)/K(m) 15.8 +/- 1.8 m(-1) s(-1)) and butyryl (k(cat)/K(m) 17.5 +/- 2.1 m(-1) s(-1)) derivatives of AT(L)-ACP(L) faster than acetyl (k(cat)/K(m) 4.9 +/- 0.7 m(-1) s(-1)), malonyl (k(cat)/K(m) 3.9 +/- 0.5 m(-1) s(-1)), or methylmalonyl derivatives. PikAIV containing a TEI domain catalyzed cleavage of propionyl derivative of AT(L)-ACP(L) at a dramatically lower rate than TEII. These results provide the first unequivocal in vitro evidence that TEII can hydrolyze acyl-ACP thioesters and a model for the action of TEII in which the enzyme remains primarily dissociated from the polyketide synthase, preferentially removing aberrant acyl-ACP species with long half-lives. The lack of rigorous substrate specificity for TEII may explain the surprising observation that high level expression of the protein in Streptomyces venezuelae leads to significant (>50%) titer decreases.     

Purification and characterization of a novel erythrose reductase from Candida magnoliae

Erythritol biosynthesis is catalyzed by erythrose reductase, which converts erythrose to erythritol. Erythrose reductase, however, has never been characterized in terms of amino acid sequence and kinetics. In this study, NAD(P)H-dependent erythrose reductase was purified to homogeneity from Candida magnoliae KFCC 11023 by ion exchange, gel filtration, affinity chromatography, and preparative electrophoresis. The molecular weights of erythrose reductase determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and gel filtration chromatography were 38,800 and 79,000, respectively, suggesting that the enzyme is homodimeric. Partial amino acid sequence analysis indicates that the enzyme is closely related to other yeast aldose reductases. C. magnoliae erythrose reductase catalyzes the reduction of various aldehydes. Among aldoses, erythrose was the preferred substrate (K(m) = 7.9 mM; k(cat)/K(m) = 0.73 mM(-1) s(-1)). This enzyme had a dual coenzyme specificity with greater catalytic efficiency with NADH (k(cat)/K(m) = 450 mM(-1) s(-1)) than with NADPH (k(cat)/K(m) = 5.5 mM(-1) s(-1)), unlike previously characterized aldose reductases, and is specific for transferring the 4-pro-R hydrogen of NADH, which is typical of members of the aldo/keto reductase superfamily. Initial velocity and product inhibition studies are consistent with the hypothesis that the reduction proceeds via a sequential ordered mechanism. The enzyme required sulfhydryl compounds for optimal activity and was strongly inhibited by Cu(2+) and quercetin, a strong aldose reductase inhibitor, but was not inhibited by aldehyde reductase inhibitors and did not catalyze the reduction of the substrates for carbonyl reductase. These data indicate that the C. magnoliae erythrose reductase is an NAD(P)H-dependent homodimeric aldose reductase with an unusual dual coenzyme specificity.     

Kinetic and mechanistic analysis of the malonyl CoA:ACP transacylase from Streptomyces coelicolor indicates a single catalytically competent serine nucleophile at the active site

The source of malonyl groups for polyketide and fatty acid biosynthesis is malonyl CoA. During fatty acid and polyketide biosynthesis, malonyl groups are normally transferred to the acyl carrier protein (ACP) component of the synthase by a malonyl CoA:holo-ACP transacylase (MCAT) enzyme. The fatty acid synthase (FAS) malonyl CoA:ACP transacylase from Streptomyces coelicolor was expressed in Escherichia coli as a hexahistidine-tagged (His(6)) fusion protein in high yield. The His(6)-MCAT was purified to homogeneity using standard techniques, and kinetic analysis of the malonylation of S. coelicolorFAS holo-ACP, catalyzed by His(6)-MCAT, gave K(infinity) (M) values of 73 (ACP) and 60 microM (malonyl CoA). A catalytic constant k (infinity) (M) of 450 s(-1) and specificity constants k (infinity) (M)/K (infinity) (M) of 6.2 (ACP) and 7.5 microM(-1) s(-1) (malonyl CoA) were measured. Malonyl transfer to the E. coli FAS holo-ACP, catalyzed by His(6)-MCAT, was less efficient (k (infinity) (M)/K (infinity) (M) was 10% of that of the S. coelicolor ACP). Incubation of MCAT with the serine specific agent PMSF caused inhibition of malonyl transfer to FAS ACPs, and an S97A MCAT mutant was incapable of catalyzing malonyl transfer. Our results show that in the reaction with FAS holo-ACPs the S. coelicolor MCAT is very similar to the E. coli MCAT paradigm in terms of its kinetic mechanism and active site residues. These results indicate that no other active site nucleophile is involved in catalysis as has been suggested to explain recently reported observations.     

Human bile salt-dependent lipase efficiency on medium-chain acyl-containing substrates: control by sodium taurocholate

Bile salt-dependent lipase was purified to homogeneity from lyophilized human milk and used to screen the influence of the acyl chain length (2-16 carbon atoms) on the kinetic constants k(cat) and K(m) of the hydrolysis of para-nitrophenyl (pnp) ester substrates in the presence or absence of sodium taurocholate (NaTC: 0.02-20 mM). The highest k(cat) value (～3,500 s(-1)) was obtained with pnpC(8) as substrate, whereas the lowest K(m) (<10 μM) was that recorded with pnpC(10). In the absence of NaTC, the maximal catalytic efficiency (k(cat)/K(m)) was obtained with pnpC(8), while in the presence of NaTC k(cat)/K(m) was maximal with pnpC(8), pnpC(10) or pnpC(12). The bile salt activated the enzyme in two successive saturation phases occurring at a micromolar and a millimolar concentration range, respectively. The present data emphasize the suitability of this enzyme for the hydrolysis of medium-chain acyl-containing substrates and throw additional light on how BSDL is activated by NaTC.     

Activation of (Na++K+)-ATPase by long-chain fatty acids and fatty acyl coenzymes A

Long-chain unsaturated fatty acids and fatty acyl CoA derivatives activated (Na++K+)-ATPase at suboptimal, but not optimal, ATP concentrations. Activation was obtained within a narrow range of fatty acid concentrations; higher acid levels inhibited the enzyme. The various CoA esters, however, activated with K0.5 values in the range of 0.15-10 microM; and with no inhibitory effects at concentrations up to 100 microM. Palmitoyl CoA, binding reversibly to a regulatory site, reduced K0.5 of ATP from 0.37 mM to 0.17 mM; and changed the Hill coefficient of the substrate-velocity curve from 0.86 to 0.63. These compounds may be physiological regulators that desensitize the function of this enzyme to diminishing ATP levels.     

Mechanistic analyses of catalysis in human pancreatic alpha-amylase: detailed kinetic and structural studies of mutants of three conserved carboxylic acids

The roles of three conserved active site carboxylic acids (D197, E233, and D300) in the catalytic mechanism of human pancreatic alpha-amylase (HPA) were studied by utilizing site-directed mutagenesis in combination with structural and kinetic analyses of the resultant enzymes. All three residues were mutated to both alanine and the respective amide, and a double alanine mutant (E233A/D300A) was also generated. Structural analyses demonstrated that there were no significant differences in global fold for the mutant enzymes. Kinetic analyses were performed on the mutants, utilizing a range of substrates. All results suggested that D197 was the nucleophile, as virtually all activity (>10(5)-fold decrease in k(cat) values) was lost for the enzymes mutated at this position when assayed with several substrates. The significantly greater second-order rate constant of E233 mutants on "activated" substrates (k(cat)/K(m) value for alpha-maltotriosyl fluoride = 15 s(-)(1) mM(-)(1)) compared with "unactivated" substrates (k(cat)/K(m) value for maltopentaose = 0.0030 s(-)(1) mM(-)(1)) strongly suggested that E233 is the general acid catalyst, as did the pH-activity profiles. Transglycosylation was favored over hydrolysis for the reactions of several of the enzymes mutated at D300. At the least, this suggests an overall impairment of the catalytic mechanism where the reaction then proceeds using the better acceptor (oligosaccharide instead of water). This may also suggest that D300 plays a crucial role in enzymic interactions with the nucleophilic water during the hydrolysis of the glycosidic bond.     

Engineering Streptomyces clavuligerus deacetoxycephalosporin C synthase for optimal ring expansion activity toward penicillin G

The deacetoxycephalosporin C synthase (DAOCS) from Streptomyces clavuligerus was engineered with the aim of enhancing the conversion of penicillin G into phenylacetyl-7-aminodeacetoxycephalosporanic acid, a precursor of 7-aminodeacetoxycephalosporanic acid, for industrial application. A single round of random mutagenesis followed by the screening of 5,500 clones identified three mutants, G79E, V275I, and C281Y, that showed a two- to sixfold increase in the k(cat)/K(m) ratio compared to the wild-type enzyme. Site-directed mutagenesis to modify residues surrounding the substrate resulted in three mutants, N304K, I305L, and I305M, with 6- to 14-fold-increased k(cat)/K(m) values. When mutants containing all possible combinations of these six sites were generated to optimize the ring expansion activity for penicillin G, the double mutant, YS67 (V275I, I305M), showed a significant 32-fold increase in the k(cat)/K(m) ratio and a 5-fold increase in relative activity for penicillin G, while the triple mutant, YS81 (V275I, C281Y, I305M), showed an even greater 13-fold increase in relative activity toward penicillin G. Our results demonstrate that this is a robust approach to the modification of DAOCS for an optimized DAOCS-penicillin G reaction.     

Purification and characterization of a novel (R)-hydroxynitrile lyase from Eriobotrya japonica (Loquat)

A hydroxynitrile lyase was isolated and purified to homogeneity from seeds of Eriobotrya japonica (loquat). The final yield, of 36% with 49-fold purification, was obtained by 30-80% (NH(4))(2)SO(4) fractionation and column chromatography on DEAE-Toyopearl and Concanavalin A Sepharose 4B, which suggested the presence of a carbohydrate side chain. The purified enzyme was a monomer with a molecular mass of 72 kDa as determined by gel filtration, and 62.3 kDa as determined by SDS-gel electrophoresis. The N-terminal sequence is reported. The enzyme was a flavoprotein containing FAD as a prosthetic group, and it exhibited a K(m) of 161 microM and a k(cat)/K(m) of 348 s(-1) mM(-1) for mandelonitrile. The optimum pH and temperature were pH 5.5 and 40 degrees C respectively. The enzyme showed excellent stability with regard to pH and temperature. Metal ions were not required for its activity, while activity was significantly inhibited by CuSO(4), HgCl(2), AgNO(3), FeCl(3), beta-mercaptoethanol, iodoacetic acid, phenylmethylsulfonylfluoride, and diethylpyrocarbonate. The specificity constant (k(cat)/K(m)) of the enzyme was investigated for the first time using various aldehydes as substrates. The enzyme was active toward aromatic and aliphatic aldehydes, and showed a preference for smaller substrates over bulky one.