Facile synthesis of magnetic metal organic frameworks for the enrichment of low‐abundance peptides for MALDI‐TOF MS analysis

In this work, core‐shell magnetic metal organic framework (MOF) microspheres were successfully synthesized by coating magnetite particles with mercaptoacetic acid and subsequent reactions with ethanol solutions of Cu(OAc)₂ and benzene‐1,3,5‐tricarboxylic acid (designated as H₃btc) alternately. The resulting Fe₃O₄@[Cu₃(btc)₂] possess strong magnetic responsiveness. We applied the novel nanocomposites in the enrichment of low‐concentration standard peptides, peptides in MYO and BSA tryptic digests and in human urine in combination with MALDI‐TOF MS analysis for the first time. In addition, the Cu₃(btc)₂ MOF shells exhibit strong affinity to peptides, thus providing a rapid and convenient approach to the concentration of low‐abundance peptides. Notably, peptides at an extremely low concentration of 10 pM could be detected by MALDI‐TOF MS after enrichment with the magnetic MOF composites. In brief, the facile synthesis and efficient enrichment process of the Fe₃O₄@[Cu₃(btc)₂] microspheres make them promising candidates for the isolation of peptides in even complex biological environments.     

Selective separation and enrichment of peptides for MS analysis using the microspheres composed of Fe3O4@nSiO2 core and perpendicularly aligned mesoporous SiO2 shell

In this work, we report the development of a novel enrichment protocol for peptides by using the microspheres composed of Fe₃O₄@nSiO₂ Core and perpendicularly aligned mesoporous SiO₂ shell (designated Fe₃O₄@nSiO₂@mSiO₂). The Fe₃O₄@nSiO₂@mSiO₂ microspheres possess useful magnetic responsivity which makes the process of enrichment fast and convenient. The highly ordered nanoscale pores (2 nm) and high‐surface areas of the microspheres were demonstrated to have good size‐exclusion effect for the adsorption of peptides. An increase of S/N ratio over 100 times could be achieved by using the microspheres to enrich a standard peptide, and the application of the microspheres to enrich universal peptides was performed by using myoglobin tryptic digest solution. The enrichment efficiency of re‐used Fe₃O₄@nSiO₂@mSiO₂ microspheres was also studied. Large‐scale enrichment of endogenous peptides in rat brain extract was achieved by the microspheres. Automated nano‐LC‐ESI‐MS/MS was applied to analyze the sample after enrichment, and 60 unique peptides were identified in total. The facile and low‐cost synthesis as well as the convenient and efficient enrichment process of the novel Fe₃O₄@nSiO₂@mSiO₂ microspheres makes it a promising candidate for selectively isolation and enrichment of endogenous peptides from complex biological samples.     

3D Porous γ‐Fe2O3@C Nanocomposite as High‐Performance Anode Material of Na‐Ion Batteries

A simple and template‐free method for preparing three‐dimensional (3D) porous γ‐Fe₂O₃@C nanocomposite is reported using an aerosol spray pyrolysis technology. The nanocomposite contains inner‐connected nanochannels and γ‐Fe₂O₃ nanoparticles (5 nm) uniformly embedded in a porous carbon matrix. The size of γ‐Fe₂O₃ nanograins and carbon content can be controlled by the concentration of the precursor solution. The unique structure of the 3D porous γ‐Fe₂O₃@C nanocomposite offers a synergistic effect to alleviate stress, accommodate large volume change, prevent nanoparticles aggregation, and facilitate the transfer of electrons and electrolyte during prolonged cycling. Consequently, the nanocomposite shows high‐rate capability and long‐term cyclability when applied as an anode material for Na‐ion batteries (SIBs). Due to the simple one‐pot synthesis technique and high electrochemical performance, 3D porous γ‐Fe₂O₃@C nanocomposites have a great potential as anode materials for rechargeable SIBs.     

Novel and efficient method for immobilization and stabilization of β-d-galactosidase by covalent attachment onto magnetic Fe3O4–chitosan nanoparticles

A novel and efficient immobilization of β-d-galactosidase from Aspergillus oryzae has been developed by using magnetic Fe₃O₄–chitosan (Fe₃O₄–CS) nanoparticles as support. The magnetic Fe₃O₄–CS nanoparticles were prepared by electrostatic adsorption of chitosan onto the surface of Fe₃O₄ nanoparticles made through co-precipitation of Fe²⁺ and Fe³⁺. The resultant material was characterized by transmission electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, vibrating sample magnetometry and thermogravimetric analysis. β-d-Galactosidase was covalently immobilized onto the nanocomposites using glutaraldehyde as activating agent. The immobilization process was optimized by examining immobilized time, cross-linking time, enzyme concentration, glutaraldehyde concentration, the initial pH values of glutaraldehyde and the enzyme solution. As a result, the immobilized enzyme presented a higher storage, pH and thermal stability than the soluble enzyme. Galactooligosaccharide was formed with lactose as substrate by using the immobilized enzyme as biocatalyst, and a maximum yield of 15.5% (w/v) was achieved when about 50% lactose was hydrolyzed. Hence, the magnetic Fe₃O₄–chitosan nanoparticles are proved to be an effective support for the immobilization of β-d-galactosidase.     

Biodesulfurization of Dibenzothiophene by Microbial Cells Coated with Magnetite Nanoparticles

Microbial cells of Pseudomonas delafieldii were coated with magnetic Fe₃O₄ nanoparticles and then immobilized by external application of a magnetic field. Magnetic Fe₃O₄ nanoparticles were synthesized by a coprecipitation method followed by modification with ammonium oleate. The surface-modified Fe₃O₄ nanoparticles were monodispersed in an aqueous solution and did not precipitate in over 18 months. Using transmission electron microscopy (TEM), the average size of the magnetic particles was found to be in the range from 10 to 15 nm. TEM cross section analysis of the cells showed further that the Fe₃O₄ nanoparticles were for the most part strongly absorbed by the surfaces of the cells and coated the cells. The coated cells had distinct superparamagnetic properties. The magnetization (δ_s) was 8.39 emu · g⁻¹. The coated cells not only had the same desulfurizing activity as free cells but could also be reused more than five times. Compared to cells immobilized on Celite, the cells coated with Fe₃O₄ nanoparticles had greater desulfurizing activity and operational stability.     

Improved degradation of lignocellulosic biomass pretreated by Fenton-like reaction using Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> magnetic nanoparticles

The ability of Fe₃O₄ Fenton-like reaction to produce glucose from lignocellulosic biomass was investigated. Fe₃O₄ magnetite nanoparticles were chemically synthesized from iron salts (a mixture of 1 M FeCl₂ and 2M FeCl₃) using an ammonia solution (30% NH₄OH). The synthesized Fe₃O₄ nanoparticles were further characterized by X-ray photoelectron spectroscopy, energy dispersive X-ray spectroscopy, scanning electron microscopy, and transmission electron microscopy. Reed stems and rice straw biomasses pretreated with optimized Fenton-like reagents (Fe₃O₄ and H₂O₂) increased glucose production by 177 and 87%, respectively, compared to the control without the catalysts.     

Rapid synthesis of titanium(IV)‐immobilized magnetic mesoporous silica nanoparticles for endogenous phosphopeptides enrichment

The MALDI‐TOF MS has already been a main platform for phosphoproteome analysis. However, there are some weaknesses in direct analysis of endogenous phosphopeptides by MALDI‐TOF MS because of the serious suppression effect and poor ionization efficiency, which is brought by the excess of nonphosphopeptides and protein. It is essential to enrich endogenous phosphopeptides from complex biosamples efficiently prior to MALDI‐TOF MS analysis. Herein, we present a time‐saving and detailed protocol for the synthesis of titanium(iv)‐immobilized magnetic mesoporous silica nanoparticles (denoted as Fe₃O₄@mSiO₂‐Ti⁴⁺), the subsequent enrichment process, and MALDI‐TOF MS analysis. We tested the LOD, size‐exclusive effect, reproducibility, and stability of Fe₃O₄@mSiO₂‐Ti⁴⁺ nanoparticles. Furthermore, the ability of this protocol for identifying endogenous phosphopeptides in healthy human serum and saliva was investigated.     

Direct affinity immobilization of recombinant heparinase I fused to maltose binding protein on maltose-coated magnetic nanoparticles

Hybrid magnetic Fe₃O₄@SiO₂-poly(ethylene oxide)-maltose (Fe₃O₄@SiO₂-PEO-mal) nanoparticles synthesized by our group can be used as affinity adsorption carriers for direct separation of maltose binding protein-fused Hep I (MBP-Hep I) from a crude enzyme solution in a magnetic field. In this work, different PEO molecular weights for Fe₃O₄@SiO₂-PEO-mal nanoparticles were used for characterizing of MBP-Hep I immobilization. The results showed that all four kinds of Fe₃O₄@SiO₂-PEO-mal magnetic nanoparticles (6k, 20k, 35k and 100k for PEO) exhibited excellent adsorption capacities and the adsorption ratio increased as the PEO molecular weight increased from 6k to 100k. All four kinds of immobilized MBP-Hep I exhibited significantly improved stability at 30 °C compared with free MBP-Hep I and their half-lives were 20–50 times that of the free MBP-Hep I. Fe₃O₄@SiO₂-PEO-mal nanoparticles with a PEO molecular weight of 100k were best able to immobilize MBP-Hep I (Fe₃O₄@SiO₂-PEO_100k-mal-MBP-Hep I). The molecular weight distribution profiles and anticoagulant activities, obtained from heparin depolymerization by free Hep I, free MBP-Hep I and Fe₃O₄@SiO₂-PEO_100k-mal-MBP-Hep I were the same. Furthermore, Fe₃O₄@SiO₂-PEO_100k-mal-MBP-Hep I exhibited reasonable reusability during enzymatic production of low molecular weight heparins (LMWHs).     

In vitro spectroscopic investigation of groove binding interaction of Fe3O4@CaAl-LDH@L-Dopa with calf thymus DNA

Abstract

The principal goal of this study is to evaluate the interaction of Fe₃O₄@CaAl-LDH@L-Dopa and Fe₃O₄@CaAl-LDH nanoparticles with calf thymus DNA. The magnetic nanoparticles were previously prepared by a chemical co-precipitation method, and the surface of the Fe₃O₄ nanoparticles was coated with CaAl layered double hydroxides. The antiparkinsonian drug “L-Dopa” was carried by this core–shell nanostructure to achieve the drug delivery system with suitable properties for biological applications. Also, the interaction of Fe₃O₄@CaAl-LDH@L-Dopa and Fe₃O₄@CaAl-LDH nanoparticles with CT-DNA was studied using, UV–Visible spectroscopy, viscosity, circular dichroism (CD), and fluorescence spectroscopy techniques. The results of investigations demonstrated that Fe₃O₄@CaAl-LDH@L-Dopa and Fe₃O₄@CaAl-LDH nanoparticles have interacted via minor groove binding and intercalated to CT-DNA, respectively.     

Facile synthesis of magnetic poly(styrene‐co‐4‐vinylbenzene‐boronic acid) microspheres for selective enrichment of glycopeptides

In this work, the composites of magnetic Fe₃O₄@SiO₂@poly (styrene‐co‐4‐vinylbenzene‐boronic acid) microspheres with well‐defined core–shell–shell structure were facilely synthesized and applied to selectively enrich glycopeptides. Due to the relatively large amount of vinyl groups introduced by 3‐methacryloxy‐propyl‐trimethoxysilane on the core‐shell surface, the poly(styrene‐co‐4‐vinylbenzeneboronic acid) (PSV) was coated with high efficiency, resulting in a large amount of boronic acid on the outermost polymer shell of the Fe₃O₄@SiO₂@PSV microspheres, which is of great importance to improve the enrichment efficiency for glycopeptides. The obtained Fe₃O₄@SiO₂@PSV microspheres were successfully applied to the enrichment of glycopeptides with strong specificity and high selectivity, evaluated by capturing glycopeptides from tryptic digestion of model glycoprotein HRP diluted to 0.05 ng/μL (1.25 × 10^?13 mol, 100 μL), tryptic digest of HRP and nonglycosylated BSA up to the ratio of 1:120 w/w and the real complex sample human serum with 103 unique N‐glycosylation peptides of 46 different glycoproteins enriched.     

Hollow NiCo2S4 Nanospheres Hybridized with 3D Hierarchical Porous rGO/Fe2O3 Composites toward High‐Performance Energy Storage Device

Hierarchical hollow NiCo₂S₄ microspheres with a tunable interior architecture are synthesized by a facile and cost‐effective hydrothermal method, and used as a cathode material. A three‐dimensional (3D) porous reduced graphene oxide/Fe₂O₃ composite (rGO/Fe₂O₃) with precisely controlled particle size and morphology is successfully prepared through a scalable facile approach, with well‐dispersed Fe₂O₃ nanoparticles decorating the surface of rGO sheets. The fixed Fe₂O₃ nanoparticles in graphene efficiently prevent the intermediates during the redox reaction from dissolving into the electrolyte, resulting in long cycle life. KOH activation of the rGO/Fe₂O₃ composite is conducted for the preparation of an activated carbon material–based hybrid to transform into a 3D porous carbon material–based hybrid. An energy storage device consisting of hollow NiCo₂S₄ microspheres as the positive electrode, the 3D porous rGO/Fe₂O₃ composite as the negative electrode, and KOH solution as the electrolyte with a maximum energy density of 61.7 W h kg^?1 is achieved owing to its wide operating voltage range of 0–1.75 V and the designed 3D structure. Moreover, the device exhibits a high power density of 22 kW kg^?1 and a long cycle life with 90% retention after 1000 cycles at the current density of 1 A g^?1.     

High Reversible Lithium Storage Capacity and Structural Changes of Fe2O3 Nanoparticles Confined inside Carbon Nanotubes

The structural evolution of electrochemically prelithiated Fe₂O₃ nanoparticles confined in carbon nanotubes (CNTs) during lithium insertion/extraction is studied by in situ transmission electron microscopy. It is found that the aggregation and coarsening of Fe core‐containing Li₂O (Fe@Li₂O) nanograins formed during the charge process are prevented by the spatial restriction of the CNTs. A high reversible capacity of 2071 mA h g^?1 for the encapsulated Fe₂O₃ nanoparticles in CNTs is demonstrated when the material is used as the anode of lithium ion batteries. This is the highest reversible capacity ever reported for an Fe₂O₃ electrode. The significantly improved lithium storage capacity of the Fe₂O₃ nanoparticles is attributed to the extra lithium storage due to the enhanced interfacial lithium storage and reversible reaction of LiOH to form LiH and solid‐electrolyte‐interphase conversion originating from the nanoconfinement of CNTs as well as the very small particle size of the Fe@Li₂O nanograins and their good electrical contact with CNTs.     

Application of a fluorescent biosensor based‐on magneto‐γ‐Fe2O3–methyldopa nanoparticles for adsorption of human serum albumin

Understanding and controlling the interaction between the polymer methyldopa (2‐amino‐3‐(3,4‐dihydroxyphenyl)‐2‐methyl‐propanoic acid) (PMDP)–γ‐Fe₂O₃ nanoparticles and biological fluids is important if the potential of nanoparticles (NPs) in biomedicine is to be realized. Physicochemical studies on the interactions between proteins and NPs are influenced by the surface properties of the NPs. To identify the effects of the NP surface, interactions between human serum albumin (HSA) and PMDP–γ‐Fe₂O₃ NPs were investigated. Here, the adsorption of HSA onto small (10–30 nm diameter) PMDP–γ‐Fe₂O₃ NPs was quantitatively analyzed using spectroscopic methods. The fluorescence quenching data were checked for the inner‐filter effect, the main confounding factor in the observed quenching. The binding constants, K_a, were calculated at different temperatures, using a nonlinear fit to the experimental data, and the thermodynamic parameters ?H, ?S and ?G were given. The obtained thermodynamic signature suggests that hydrophobic interactions at least are present. This result indicates that the structure of the protein turns from a structureless denatured state at pH 3 into an ordered biologically active native state on addition of PMDP–γ‐Fe₂O₃ NPs. Copyright © 2015 John Wiley & Sons, Ltd.     

Highly selective enrichment of phosphopeptides by on‐chip indium oxide functionalized magnetic nanoparticles coupled with MALDI‐TOF MS

Selective and efficient preconcentration is indispensable for low concentration of phosphopeptides in phosphorylated protein‐related samples prior to MS‐based analysis. Herein, an on‐chip system coupled magnetic SPE with MALDI‐TOF MS was designed. A metal oxide affinity chromatography material, indium oxide, was coated on the surface of Fe₃O₄ magnetic nanoparticles to prepare the adsorbent, spatially confined with an applied magnetic field. The adsorbent exhibited high selectivity for phosphopeptides in tryptic digests of the mixture of β‐casein and BSA (1:1000) and the mixture of β‐casein, BSA, and ovalbumin (1:100:100). Thanking to the enrichment ability and specificity for phosphopeptides with the adsorbent, the on‐chip magnetic SPE‐MALDI‐TOF MS approach showed high sensitivity with a low detection limit of 4 fmol. In addition, the developed approach was used to analyze phosphopetides in non‐fat milk digests and human serum successfully.     

A novel electroconductive interface based on Fe3O4 magnetic nanoparticle and cysteamine functionalized AuNPs: Preparation and application as signal amplification element to minoring of antigen‐antibody immunocomplex and biosensing of prostate cancer

In this study, a novel electroconductive interface was prepared based on Fe₃O₄ magnetic nanoparticle and cysteamine functionalized gold nanoparticle. The engineered interface was used as signal amplification substrate in the electrochemical analysis of antibody‐antigen binding. For this purpose, biotinilated‐anti‐prostate‐specific antigen (PSA) antibody was bioconjugated with iron oxide magnetic nanoparticles (Fe₃O₄) and drop‐casted on the surface of glassy carbon electrode (GCE). Also, secondary antibody (HRP‐Ab2) encapsulated on gold nanoparticles caped by cysteamine was immobilized on the surface of GCE modified electrode. A transmission electron microscopy images shows that a sandwich immunoreaction was done and binding of Ab1 and Ab2 performed successfully. Various parameters of immunoassay, including the loading of magnetic nanoparticles, the amount of gold nanoparticle conjugate, and the immunoreaction time, were optimized. The detection limit of 0.001 μg. L^?1 of PSA was obtained under optimum experimental conditions. It is found that such magneto‐bioassay could be readily used for simultaneous parallel detection of multiple proteins by using multiple inorganic metal nanoparticle tracers and are expected to open new opportunities for early stage diagnosis of cancer in near future.     

Optimum conditions for lipase immobilization on chitosan-coated Fe3O4 nanoparticles

Magnetic Fe₃O₄-chitosan nanoparticles are prepared by the coagulation of an aqueous solution of chitosan with Fe₃O₄ nanoparticles. The characterization of Fe₃O₄-chitosan is analyzed by FTIR, FESEM, and SQUID magnetometry. The Fe₃O₄-chitosan nanoparticles are used for the covalent immobilization of lipase from Candida rugosa using N-(3-dimethylaminopropyl)-N′-ethylcarbodiimide (EDC) and N-hydroxysuccinimide (NHS) as coupling agents. The response surface methodology (RSM) was employed to search the optimal immobilization conditions and understand the significance of the factors affecting the immobilized lipase activity. Based on the ridge max analysis, the optimum immobilization conditions were immobilization time 2.14 h, pH 6.37, and enzyme/support ratio 0.73 (w/w); the highest activity obtained was 20 U/g Fe₃O₄-chitosan. After twenty repeated uses, the immobilized lipase retains over 83% of its original activity. The immobilized lipase shows better operational stability, including wider thermal and pH ranges, and remains stable after 13 days of storage at 25 °C.     

Double-Layer Magnetic Nanoparticle-Embedded Silica Particles for Efficient Bio-Separation

Superparamagnetic Fe₃O₄ nanoparticles (NPs) based nanomaterials have been exploited in various biotechnology fields including biomolecule separation. However, slow accumulation of Fe₃O₄ NPs by magnets may limit broad applications of Fe₃O₄ NP-based nanomaterials. In this study, we report fabrication of Fe₃O₄ NPs double-layered silica nanoparticles (DL MNPs) with a silica core and highly packed Fe₃O₄ NPs layers. The DL MNPs had a superparamagnetic property and efficient accumulation kinetics under an external magnetic field. Moreover, the magnetic field-exposed DL MNPs show quantitative accumulation, whereas Fe₃O₄ NPs single-layered silica nanoparticles (SL MNPs) and silica-coated Fe₃O₄ NPs produced a saturated plateau under full recovery of the NPs. DL MNPs are promising nanomaterials with great potential to separate and analyze biomolecules.     

Rational Construction of Self‐Standing Sulfur‐Doped Fe2O3 Anodes with Promoted Energy Storage Capability for Wearable Aqueous Rechargeable NiCo‐Fe Batteries

Aqueous rechargeable Ni‐Fe batteries featuring an ultra‐flat discharge plateau, low cost, and outstanding safety characteristics show promising prospects for application in wearable energy storage. In particular, fiber‐shaped Ni‐Fe batteries will enable textile‐based energy supply for wearable electronics. However, the development of fiber‐shaped Ni‐Fe batteries is currently challenged by the performance of fibrous Fe‐based anode materials. In this context, this study describes the fabrication of sulfur‐doped Fe₂O₃ nanowire arrays (S‐Fe₂O₃ NWAs) grown on carbon nanotube fibers (CNTFs) as an innovative anode material (S‐Fe₂O₃ NWAs/CNTF). Encouragingly, first‐principle calculations reveal that S‐doping in Fe₂O₃ can dramatically reduce the band gap from 2.34 to 1.18 eV and thus enhance electronic conductivity. The novel developed S‐Fe₂O₃ NWAs/CNTF electrode is further demonstrated to deliver a very high capacity of 0.81 mAh cm^?2 at 4 mA cm^?2. This value is almost sixfold higher than that of the pristine Fe₂O₃ NWAs/CNTF electrode. When a cathode containing zinc‐nickel‐cobalt oxide (ZNCO)@Ni(OH)₂ NWAs heterostructures is used, 0.46 mAh cm^?2 capacity and 67.32 mWh cm^?3 energy density are obtained for quasi‐solid‐state fiber‐shaped NiCo‐Fe batteries, which outperform most state‐of‐the‐art fiber‐shaped aqueous rechargeable batteries. These findings offer an innovative and feasible route to design high‐performance Fe‐based anodes and may inspire new development for the next‐generation wearable Ni‐Fe batteries.     

Insights into Ionic Transport and Structural Changes in Magnetite during Multiple‐Electron Transfer Reactions

Metal oxides, such as Fe₃O₄, hold promise for future battery applications due to their abundance, low cost, and opportunity for high lithium storage capacity. In order to better understand the mechanisms of multiple‐electron transfer reactions leading to high capacity in Fe₃O₄, a comprehensive investigation on local ionic transport and ordering is made by probing site occupancies of anions (O^2?) and cations (Li⁺, Fe³⁺/Fe²⁺) using multiple synchrotron X‐ray and electron‐beam techniques, in combination with ab‐initio calculations. Results from this study provide the first experimental evidence that the cubic‐close‐packed (ccp) O‐anion array in Fe₃O₄ is sustained throughout the lithiation and delithiation processes, thereby enabling multiple lithium intercalation and conversion reactions. Cation displacement/reordering occurs within the ccp O‐anion framework, which leads to a series of phase transformations, starting from the inverse spinel phase and turning into intermediate rock‐salt‐like phases (Li_xFe₃O₄; 0 < x < 2), then into a cation‐segregated phase (Li₂O?FeO), and finally converting into metallic Fe and Li₂O. Subsequent delithiation and lithiation processes involve interconversion between metallic Fe and FeO‐like phases. These results may offer new insights into the structure‐determined ionic transport and electrochemical reactions in metal oxides, and those of other compounds sharing a ccp anion framework, reminiscent of magnetite.     

巨噬细胞膜仿生纳米铁颗粒制备及多形性胶质母细胞瘤MRI成像的初步实验研究

摘要 目的：探讨巨噬细胞膜仿生的纳米铁颗粒（Fe3O4 NCs@MM）对多形性胶质母细胞瘤MRI成像的研究。方法：制备巨噬细胞膜仿生的纳米铁颗粒Fe₃O₄ NCs@MM,利用动态光散射（Dynamic Light Scattering,DLS）和透射电子显微镜（Transmission Electron Microscope,TEM）对其水合动力学粒径、表面电势和形态进行表征。采用SDS-聚丙烯酰胺凝胶电泳（sodium dodecyl sulphate-polyacrylamide gel electrophoresis,SDS-PAGE）评价巨噬细胞膜的完整包覆;紫外可见光谱测定巨噬细胞膜仿生的纳米铁颗粒抗蛋白吸附能力。通过MRI成像系统,分析了含不同浓度的Fe元素（0.1-1.6 mM）的Fe₃O₄ NCs@MM在GSH存在或不存在时的T₁弛豫效应。采用细胞增殖-毒性实验（Cell Counting Kit-8,CCK-8）,测定巨噬细胞膜仿生纳米铁颗粒处理肿瘤细胞24 h后的细胞活性。尾静脉注射巨噬细胞膜仿生纳米铁颗粒至原位胶质母细胞瘤模型中,观察成像效果。结果：巨噬细胞膜仿生的纳米铁颗粒Fe₃O₄ NCs@MM的水合动力学粒径和表面电势分别为 286.5±7.6 nm和-20.7±3.5 mV,且在水溶液中分布均匀,具有较好的单分散性。包覆巨噬细胞膜的纳米铁颗粒具备抗蛋白吸附的能力。MRI成像显示,制备的巨噬细胞膜仿生的纳米铁颗粒Fe₃O₄ NCs@MM为GSH响应型MRI对比剂,具有较好的T₁-加权磁共振成像效果,在尾静脉注射巨噬细胞膜的纳米铁颗粒0.5 h后,肿瘤部位的信号可见增强。结论：巨噬细胞膜仿生的纳米铁颗粒Fe₃O₄ NCs@MM可实现多形性胶质母细胞瘤的MRI成像。