Plasticity and steric strain in a parallel beta-helix: rational mutations in the P22 tailspike protein

By means of genetic screens, a great number of mutations that affect the folding and stability of the tailspike protein from Salmonella phage P22 have been identified. Temperature-sensitive folding (tsf) mutations decrease folding yields at high temperature, but hardly affect thermal stability of the native trimeric structure when assembled at low temperature. Global suppressor (su) mutations mitigate this phenotype. Virtually all of these mutations are located in the central domain of tailspike, a large parallel beta-helix. We modified tailspike by rational single amino acid replacements at three sites in order to investigate the influence of mutations of two types: (1) mutations expected to cause a tsf phenotype by increasing the side-chain volume of a core residue, and (2) mutations in a similar structural context as two of the four known su mutations, which have been suggested to stabilize folding intermediates and the native structure by the release of backbone strain, an effect well known for residues that are primarily evolved for function and not for stability or folding of the protein. Analysis of folding yields, refolding kinetics and thermal denaturation kinetics in vitro show that the tsf phenotype can indeed be produced rationally by increasing the volume of side chains in the beta-helix core. The high-resolution crystal structure of mutant T326F proves that structural rearrangements only take place in the remarkably plastic lumen of the beta-helix, leaving the arrangement of the hydrogen-bonded backbone and thus the surface of the protein unaffected. This supports the notion that changes in the stability of an intermediate, in which the beta-helix domain is largely formed, are the essential mechanism by which tsf mutations affect tailspike folding. A rational design of su mutants, on the other hand, appears to be more difficult. The exchange of two residues in the active site expected to lead to a drastic release of steric strain neither enhanced the folding properties nor the stability of tailspike. Apparently, side-chain interactions in these cases overcompensate for backbone strain, illustrating the extreme optimization of the tailspike protein for conformational stability. The result exemplifies the view arising from the statistical analysis of the distribution of backbone dihedral angles in known three-dimensional protein structures that the adoption of straight phi/psi angles other than the most favorable ones is often caused by side-chain interactions. Proteins 2000;39:89-101.     

Coupling backbone flexibility and amino acid sequence selection in protein design.

Using a protein design algorithm that considers side-chain packing quantitatively, the effect of explicit backbone motion on the selection of amino acids in protein design was assessed in the core of the streptococcal protein G beta 1 domain (G beta 1). Concerted backbone motion was introduced by varying G beta 1's supersecondary structure parameter values. The stability and structural flexibility of seven of the redesigned proteins were determined experimentally and showed that core variants containing as many as 6 of 10 possible mutations retain native-like properties. This result demonstrates that backbone flexibility can be combined explicitly with amino acid side-chain selection and that the selection algorithm is sufficiently robust to tolerate perturbations as large as 15% of G beta 1's native supersecondary structure parameter values.     

Repacking the Core of T4 lysozyme by automated design

Automated protein redesign, as implemented in the program ORBIT, was used to redesign the core of phage T4 lysozyme. A total of 26 buried or partially buried sites in the C-terminal domain were allowed to vary both their sequence and side-chain conformation while the backbone and non-selected side-chains remained fixed. A variant with seven substitutions ("Core-7") was identified as having the most favorable energy. The redesign experiment was repeated with a penalty for the presence of methionine residues. In this case the redesigned protein ("Core-10") had ten amino acid changes. The two designed proteins, as well as the constituent single mutants, and several single-site revertants were over-expressed in Escherichia coli, purified, and subjected to crystallographic and thermal analyses. The thermodynamic and structural data show that some repacking was achieved although neither redesigned protein was more stable than the wild-type protein. The use of the methionine penalty was shown to be effective. Several of the side-chain rotamers in the predicted structure of Core-10 differ from those observed. Rather than changing to new rotamers predicted by the design process, side-chains tend to maintain conformations similar to those seen in the native molecule. In contrast, parts of the backbone change by up to 2.8A relative to both the designed structure and wild-type.Water molecules that are present within the lysozyme molecule were removed during the design process. In the redesigned protein the resultant cavities were, to some degree, re-occupied by side-chain atoms. In the observed structure, however, water molecules were still bound at or near their original sites. This suggests that it may be preferable to leave such water molecules in place during the design procedure. The results emphasize the specificity of the packing that occurs within the core of a typical protein. While point substitutions within the core are tolerated they almost always result in a loss of stability. Likewise, combinations of substitutions may also be tolerated but usually destabilize the protein. Experience with T4 lysozyme suggests that a general core repacking methodology with retention or enhancement of stability may be difficult to achieve without provision for shifts in the backbone.     

Crystal structure and novel recognition motif of rho ADP-ribosylating C3 exoenzyme from Clostridium botulinum: structural insights for recognition specificity and catalysis

Clostridium botulinum C3 exoenzyme inactivates the small GTP-binding protein family Rho by ADP-ribosylating asparagine 41, which depolymerizes the actin cytoskeleton. C3 thus represents a major family of the bacterial toxins that transfer the ADP-ribose moiety of NAD to specific amino acids in acceptor proteins to modify key biological activities in eukaryotic cells, including protein synthesis, differentiation, transformation, and intracellular signaling. The 1.7 A resolution C3 exoenzyme structure establishes the conserved features of the core NAD-binding beta-sandwich fold with other ADP-ribosylating toxins despite little sequence conservation. Importantly, the central core of the C3 exoenzyme structure is distinguished by the absence of an active site loop observed in many other ADP-ribosylating toxins. Unlike the ADP-ribosylating toxins that possess the active site loop near the central core, the C3 exoenzyme replaces the active site loop with an alpha-helix, alpha3. Moreover, structural and sequence similarities with the catalytic domain of vegetative insecticidal protein 2 (VIP2), an actin ADP-ribosyltransferase, unexpectedly implicates two adjacent, protruding turns, which join beta5 and beta6 of the toxin core fold, as a novel recognition specificity motif for this newly defined toxin family. Turn 1 evidently positions the solvent-exposed, aromatic side-chain of Phe209 to interact with the hydrophobic region of Rho adjacent to its GTP-binding site. Turn 2 evidently both places the Gln212 side-chain for hydrogen bonding to recognize Rho Asn41 for nucleophilic attack on the anomeric carbon of NAD ribose and holds the key Glu214 catalytic side-chain in the adjacent catalytic pocket. This proposed bipartite ADP-ribosylating toxin turn-turn (ARTT) motif places the VIP2 and C3 toxin classes into a single ARTT family characterized by analogous target protein recognition via turn 1 aromatic and turn 2 hydrogen-bonding side-chain moieties. Turn 2 centrally anchors the catalytic Glu214 within the ARTT motif, and furthermore distinguishes the C3 toxin class by a conserved turn 2 Gln and the VIP2 binary toxin class by a conserved turn 2 Glu for appropriate target side-chain hydrogen-bonding recognition. Taken together, these structural results provide a molecular basis for understanding the coupled activity and recognition specificity for C3 and for the newly defined ARTT toxin family, which acts in the depolymerization of the actin cytoskeleton. This beta5 to beta6 region of the toxin fold represents an experimentally testable and potentially general recognition motif region for other ADP-ribosylating toxins that have a similar beta-structure framework.     

Rotamer strain energy in protein helices - quantification of a major force opposing protein folding

It is widely believed that the dominant force opposing protein folding is the entropic cost of restricting internal rotations. The energetic changes from restricting side-chain torsional motion are more complex than simply a loss of conformational entropy, however. A second force opposing protein folding arises when a side-chain in the folded state is not in its lowest-energy rotamer, giving rotameric strain. chi strain energy results from a dihedral angle being shifted from the most stable conformation of a rotamer when a protein folds. We calculated the energy of a side-chain as a function of its dihedral angles in a poly(Ala) helix. Using these energy profiles, we quantify conformational entropy, rotameric strain energy and chi strain energy for all 17 amino acid residues with side-chains in alpha-helices. We can calculate these terms for any amino acid in a helix interior in a protein, as a function of its side-chain dihedral angles, and have implemented this algorithm on a web page. The mean change in rotameric strain energy on folding is 0.42 kcal mol-1 per residue and the mean chi strain energy is 0.64 kcal mol-1 per residue. Loss of conformational entropy opposes folding by a mean of 1.1 kcal mol-1 per residue, and the mean total force opposing restricting a side-chain into a helix is 2.2 kcal mol-1. Conformational entropy estimates alone therefore greatly underestimate the forces opposing protein folding. The introduction of strain when a protein folds should not be neglected when attempting to quantify the balance of forces affecting protein stability. Consideration of rotameric strain energy may help the use of rotamer libraries in protein design and rationalise the effects of mutations where side-chain conformations change.     

Desolvation and Development of Specific Hydrophobic Core Packing during Im7 Folding

Development of a tightly packed hydrophobic core drives the folding of water-soluble globular proteins and is a key determinant of protein stability. Despite this, there remains much to be learnt about how and when the hydrophobic core becomes desolvated and tightly packed during protein folding. We have used the bacterial immunity protein Im7 to examine the specificity of hydrophobic core packing during folding. This small, four-helix protein has previously been shown to fold via a compact three-helical intermediate state. Here, overpacking substitutions, in which residue side-chain size is increased, were used to examine the specificity and malleability of core packing in the folding intermediate and rate-limiting transition state. In parallel, polar groups were introduced into the Im7 hydrophobic core via Val→Thr or Phe→Tyr substitutions and used to determine the solvation status of core residues at different stages of folding. Over 30 Im7 variants were created allowing both series of substitutions to cover all regions of the protein structure. Φ-value analysis demonstrated that the major changes in Im7 core solvation occur prior to the population of the folding intermediate, with key regions involved in docking of the short helix III remaining solvent-exposed until after the rate-limiting transition state has been traversed. In contrast, overpacking core residues revealed that some regions of the native Im7 core are remarkably malleable to increases in side-chain volume. Overpacking residues in other regions of the Im7 core result in substantial (> 2.5 kJ mol^− 1) destabilisation of the native structure or even prevents efficient folding to the native state. This study provides new insights into Im7 folding; demonstrating that whilst desolvation occurs early during folding, adoption of a specifically packed core is achieved only at the very last step in the folding mechanism.     

The introduction of strain and its effects on the structure and stability of T4 lysozyme

In order to try to better understand the role played by strain in the structure and stability of a protein a series of "small-to-large" mutations was made within the core of T4 lysozyme. Three different alanine residues, one involved in backbone contacts, one in side-chain contacts, and the third adjacent to a small cavity, were each replaced with subsets of the larger residues, Val, Leu, Ile, Met, Phe and Trp. As expected, the protein is progressively destabilized as the size of the introduced side-chain becomes larger. There does, however, seem to be a limit to the destabilization, suggesting that a protein of a given size may be capable of maintaining only a certain amount of strain. The changes in stability vary greatly from site to site. Substitution of larger residues for both Ala42 and Ala98 substantially destabilize the protein, even though the primary contacts in one case are predominantly with side-chain atoms and in the other with backbone. The results suggest that it is neither practical nor meaningful to try to separate the effects of introduced strain on side-chains from the effects on the backbone. Substitutions at Ala129 are much less destabilizing than at sites 42 or 98. This is most easily understood in terms of the pre-existing cavity, which provides partial space to accommodate the introduced side-chains. Crystal structures were obtained for a number of the mutants. These show that the changes in structure to accommodate the introduced side-chains usually consist of essentially rigid-body displacements of groups of linked atoms, achieved through relatively small changes in torsion angles. On rare occasions, a side-chain close to the site of substitution may change to a different rotamer. When such rotomer changes occur, they permit the structure to dissipate strain by a response that is plastic rather than elastic. In one case, a surface loop moves 1.2 A, not in direct response to a mutation, but in an interaction mediated via an intermolecular contact. It illustrates how the structure of a protein can be modified by crystal contacts.     

Effects of Turn Stability and Side-Chain Hydrophobicity on the Folding of β-Structures

Key elements of β-structure folding include hydrophobic core collapse, turn formation, and assembly of backbone hydrogen bonds. In the present folding simulations of several β-hairpins and β-sheets (peptide 1, protein G B1 domain peptide, TRPZIP2, TRPZIP4, 20mer, and 20mer^DP6D), the folding free-energy landscape as a function of several reaction coordinates corresponding to the three key elements indicates apparent dependence on turn stability and side-chain hydrophobicity, which demonstrates different folding mechanisms of similar β-structures of varied sequences. Turn stability is found to be the key factor in determining the formation order of the three structural elements in the folding of β-structures. Moreover, turn stability and side-chain hydrophobicity both affect the stability of backbone hydrogen bonds. The three-stranded β-sheets fold through a three-state transition in which the formation of one hairpin always takes precedence over the other. The different stabilities of two anti-parallel hairpins in each three-stranded β-sheet are shown to correlate well with the different levels of their hydrophobic interactions.     

Is a Malleable Protein Necessarily Highly Dynamic? The Hydrophobic Core of the Nuclear Coactivator Binding Domain Is Well Ordered

The nuclear coactivator binding domain of CREB binding protein folds into remarkably different structures in complex with different ligands. To understand the mechanism of the structural adaptability in the nuclear coactivator binding domain (NCBD), we have compared the dynamics of the hydrophobic core of NCBD in the ligand-free state and in a well-folded complex with the ligand activator for thyroid hormone and retinoid receptors using multiple NMR methods including methyl chemical shifts, coupling constants, and methyl order parameters. From all NMR measures, the aliphatic side chains in the hydrophobic core are slightly more dynamic in the free protein than in the complex, but have mobility comparable to the hydrophobic cores of average folded proteins. Urea titration monitored by NMR reveals that all parts of the protein, including the side-chain packing in the hydrophobic core, denatures in a single cooperative process. The molten globule characteristics of NCBD are thus restricted to a slowly fluctuating tertiary structure. Consequently, the conformational plasticity of the protein is most likely related to its low overall stability rather than an intrinsically flexible protein structure. The well-defined structure supports a model of molecular recognition dominated by conformational selection, whereas only minor structural adjustments are necessary after the association.     

A new scale for side-chain contribution to protein stability based on the empirical stability analysis of mutant proteins

The hydrophobicity scales for amino acid side chains based on the transfer Gibbs energy (DeltaG(trans)) of amino acids from non-aqueous phases to water have been widely used to estimate the contribution of buried side chains to the conformational stability of proteins. In this paper, we propose a new scale for the side-chain contribution to protein stability, which is derived from data on protein denaturation experiments using systematic and comprehensive mutant proteins. In the experiments, the contribution of some physical properties were quantitatively determined as parameters in a unique equation representing the stability change (DeltaDeltaG) of mutant proteins as a function of the structural changes due to the mutations. These parameters are able conveniently to provide a scale for the side-chain contribution to protein stability. This new scale also has the advantage over the previously reported hydrophobicity scales of residues with the contributions of hydrogen bonds or secondary structural propensity. It may find practical application in algorithms for the prediction of protein structures.     

Core side-chain packing and backbone conformation in Lpp-56 coiled-coil mutants

Native proteins exhibit precise geometric packing of atoms in their hydrophobic interiors. Nonetheless, controversy remains about the role of core side-chain packing in specifying and stabilizing the folded structures of proteins. Here we investigate the role of core packing in determining the conformation and stability of the Lpp-56 trimerization domain. The X-ray crystal structures of Lpp-56 mutants with alanine substitutions at two and four interior core positions reveal trimeric coiled coils in which the twist of individual helices and the helix-helix spacing vary significantly to achieve the most favored superhelical packing arrangement. Introduction of each alanine "layer" into the hydrophobic core destabilizes the superhelix by 1.4 kcal mol(-1). Although the methyl groups of the alanine residues pack at their optimum van der Waals contacts in the coiled-coil trimer, they provide a smaller component of hydrophobic interactions than bulky hydrophobic side-chains to the thermodynamic stability. Thus, specific side-chain packing in the hydrophobic core of coiled coils are important determinants of protein main-chain conformation and stability.     

3-Deoxy-d-manno-octulosonic Acid (Kdo) Hydrolase Identified in Francisella tularensis,Helicobacter pylori,and Legionella pneumophila

3-Deoxy-d-manno-octulosonic acid (Kdo) is an eight-carbon sugar ubiquitous in Gram-negative bacterial lipopolysaccharides (LPS). Although its biosynthesis is well described, no protein has yet been identified as a Kdo hydrolase. However, Kdo hydrolase enzymatic activity has been detected in membranes of Helicobacter pylori and Francisella tularensis and may be responsible for the removal of side-chain Kdo from the LPS core saccharides. We now report the identification of genes encoding a Kdo hydrolase in F. tularensis Schu S4 and live vaccine strain strains, in H. pylori 26695 strain and in Legionella pneumophila Philadelphia 1 strain. We have renamed the genes kdhA for keto-deoxyoctulosonate hydrolase A. Deletion of kdhA abolished Kdo hydrolase activity in membranes of F. tularensis live vaccine strain. The F. tularensis kdhA mutant synthesized a core oligosaccharide containing a Kdo disaccharide with one of the Kdo residues being a terminal side chain. This side-chain Kdo monosaccharide was absent in the wild-type core oligosaccharide. Expression in Escherichia coli of recombinant KdhA from F. tularensis, H. pylori, and L. pneumophila resulted in a reduction of membrane-associated side-chain Kdo. The identification of this previously faceless enzyme will accelerate study of the biosynthetic basis and biologic impact for postbiosynthetic LPS structural modification.     

Statistical and molecular dynamics studies of buried waters in globular proteins

Buried solvent molecules are common in the core of globular proteins and contribute to structural stability. Folding necessitates the burial of polar backbone atoms in the protein core, whose hydrogen-bonding capacities should be satisfied on average. Whereas the residues in alpha-helices and beta-sheets form systematic main-chain hydrogen bonds, the residues in turns, coils and loops often contain polar atoms that fail to form intramolecular hydrogen bonds. The statistical analysis of 842 high resolution protein structures shows that well-resolved, internal water molecules preferentially reside near residues without alpha-helical and beta-sheet secondary structures. These buried waters most often form primary hydrogen bonds to main-chain atoms not involved in intramolecular hydrogen bonds, providing strong evidence that hydrating main-chain atoms is a key structural role of buried water molecules. Additionally, the average B-factor of protein atoms hydrogen-bonded to waters is smaller than that of protein atoms forming intramolecular hydrogen bonds, and the average B-factor of water molecules involved in primary hydrogen bonds with main-chain atoms is smaller than the average B-factor of water molecules involved in secondary hydrogen bonds to protein atoms that form concurrent intramolecular hydrogen bonds. To study the structural coupling between internal waters and buried polar atoms in detail we simulated the dynamics of wild-type FKBP12, in which a buried water, Wat137, forms one side-chain and multiple main-chain hydrogen bonds. We mutated E60, whose side-chain hydrogen bonds with Wat137, to Q, N, S or A, to modulate the multiplicity and geometry of hydrogen bonds to the water. Mutating E60 to a residue that is unable to form a hydrogen bond with Wat137 results in reorientation of the water molecule and leads to a structural readjustment of residues that are both near and distant to the water. We predict that the E60A mutation will result in a significantly reduced affinity of FKBP12 for its ligand FK506. The propensity of internal waters to hydrogen bond to buried polar atoms suggests that ordered water molecules may constitute fundamental structural components of proteins, particularly in regions where alpha-helical or beta-sheet secondary structure is not present.     

Opposing structural changes in two symmetrical polypeptides bring about opposing changes to the thermal stability of a complex integral membrane protein

The relationship between membrane protein structure and thermal stability has been examined in the reaction centre from the bacterium Rhodobacter sphaeroides, a complex membrane protein comprising three polypeptide chains and 10 cofactors. The core of this protein exhibits an approximate twofold symmetry, the cofactors being held in two membrane-spanning branches by two polypeptides, termed L and M, that have very similar folds. In assays of the thermal stability of wild-type and mutant reaction centres embedded in the native bilayer membrane, replacement of a Phe at position 197 of the M polypeptide by His produced an increase in stability, whereas an opposing replacement of His by Phe at the symmetrical position 168 of the L-polypeptide produced a decrease in stability. In light of the known X-ray crystal structures of wild-type and mutant variants of this protein, and further mutagenesis, it is concluded that these stability changes result from the introduction or removal, respectively, of a hydrogen bond between the side-chain of the His and that of an Asn located two positions along the M or L polypeptide chain, in addition to a hydrogen bond between the His side-chain and an adjacent bacteriochlorophyll cofactor.     

Configurational entropy elucidates the role of salt-bridge networks in protein thermostability

Detailed knowledge of how networks of surface salt bridges contribute to protein thermal stability is essential not only to understand protein structure and function but also to design thermostable proteins for industrial applications. Experimental studies investigating thermodynamic stability through measurements of free energy associated with mutational alterations in proteins provide only macroscopic evidence regarding the structure of salt-bridge networks and assessment of their contribution to protein stability. Using explicit-solvent molecular dynamics simulations to provide insight on the atomic scale, we investigate here the structural stability, defined in terms of root-mean-square fluctuations, of a short polypeptide designed to fold into a stable trimeric coiled coil with a well-packed hydrophobic core and an optimal number of intra- and interhelical surface salt bridges. We find that the increase of configurational entropy of the backbone and side-chain atoms and decreased pair correlations of these with increased temperature are consistent with nearly constant atom-positional root-mean-square fluctuations, increased salt-bridge occupancies, and stronger electrostatic interactions in the coiled coil. Thus, our study of the coiled coil suggests a mechanism in which well-designed salt-bridge networks could accommodate stochastically the disorder of increased thermal motion to produce thermostability.     

Generalized dead-end elimination algorithms make large-scale protein side-chain structure prediction tractable: implications for protein design and structural genomics

The dead-end elimination (DEE) theorems are powerful tools for the combinatorial optimization of protein side-chain placement in protein design and homology modeling. In order to reach their full potential, the theorems must be extended to handle very hard problems. We present a suite of new algorithms within the DEE paradigm that significantly extend its range of convergence and reduce run time. As a demonstration, we show that a total protein design problem of 10(115) combinations, a hydrophobic core design problem of 10(244) combinations, and a side-chain placement problem of 10(1044) combinations are solved in less than two weeks, a day and a half, and an hour of CPU time, respectively. This extends the range of the method by approximately 53, 144 and 851 log-units, respectively, using modest computational resources. Small to average-sized protein domains can now be designed automatically, and side-chain placement calculations can be solved for nearly all sizes of proteins and protein complexes in the growing field of structural genomics.     

Three topologically equivalent core residues affect the transition state ensemble in a protein folding reaction

The single domain protein, interleukin-1beta, is representative of a distinct class of proteins characterized by their beta-trefoil topology. Each subdomain of this structural class is composed of a beta beta beta loop beta (betabetabetaLbeta) motif comprised of approximately 50 residues and gives the protein a pseudo- 3-fold axis of symmetry. A common feature of proteins in this topological family appears to be that they are slow folders, which reach the native state on the order of tens to 100s of seconds. Sequence analysis of interleukin-1beta indicates that three phenylalanine residues located at positions 42, 101, and 146 are well conserved, separated by approximately 50 residues in the primary sequence, located in similar positions in the pseudo-symmetric units of the trefoil, and are juxtaposed to one another in conformational space. These residues surround the hydrophobic cavity and "pin" the hairpin triplet cap to the core beta-barrel. To determine if cap-barrel interactions are involved in maintaining the structural stability and cooperativity or in controlling the slow formation of the native state, we performed a series of mutational studies. The results indicate that interleukin-1beta tolerates large increases in side-chain volume at these three topologically conserved sites with little effect on stability, while the kinetics show significant differences in both the unfolding and refolding rates. Taken together, our results indicate that these conserved core residues are essential contacts in the transition-state ensemble for folding.     

Allosteric Modulation of Binding Specificity by Alternative Packing of Protein Cores

Hydrophobic cores are often viewed as tightly packed and rigid, but they do show some plasticity and could thus be attractive targets for protein design. Here we explored the role of different functional pressures on the core packing and ligand recognition of the SH3 domain from human Fyn tyrosine kinase. We randomized the hydrophobic core and used phage display to select variants that bound to each of three distinct ligands. The three evolved groups showed remarkable differences in core composition, illustrating the effect of different selective pressures on the core. Changes in the core did not significantly alter protein stability, but were linked closely to changes in binding affinity and specificity. Structural analysis and molecular dynamics simulations revealed the structural basis for altered specificity. The evolved domains had significantly reduced core volumes, which in turn induced increased backbone flexibility. These motions were propagated from the core to the binding surface and induced significant conformational changes. These results show that alternative core packing and consequent allosteric modulation of binding interfaces could be used to engineer proteins with novel functions.     

Understanding the mechanism of beta-sheet folding from a chemical and biological perspective

Perturbing the structure of the Pin1 WW domain, a 34-residue protein comprised of three beta-strands and two intervening loops has provided significant insight into the structural and energetic basis of beta-sheet folding. We will review our current perspective on how structure acquisition is influenced by the sequence, which determines local conformational propensities and mediates the hydrophobic effect, hydrogen bonding, and analogous intramolecular interactions. We have utilized both traditional site-directed mutagenesis and backbone mutagenesis approaches to alter the primary structure of this beta-sheet protein. Traditional site-directed mutagenesis experiments are excellent for altering side-chain structure, whereas amide-to-ester backbone mutagenesis experiments modify backbone-backbone hydrogen bonding capacity. The transition state structure associated with the folding of the Pin1 WW domain features a partially H-bonded, near-native reverse turn secondary structure in loop 1 that has little influence on thermodynamic stability. The thermodynamic stability of the Pin1 WW domain is largely determined by the formation of a small hydrophobic core and by the formation of desolvated backbone-backbone H-bonds enveloped by this hydrophobic core. Loop 1 engineering to the consensus five-residue beta-bulge-turn found in most WW domains or a four-residue beta-turn found in most beta-hairpins accelerates folding substantially relative to the six-residue turn found in the wild type Pin1 WW domain. Furthermore, the more efficient five- and four-residue reverse turns now contribute to the stability of the three-stranded beta-sheet. These insights have allowed the design of Pin1 WW domains that fold at rates that approach the theoretical speed limit of folding.