Influence of the subendothelial basement membrane components on fibrin assembly. Evidence for a fibrin binding site on type IV collagen

Effective repair of a vascular injury depends on establishment of a stable fibrin patch at the injury site. Data presented in this study demonstrate that structural modification of fibrin occurs as a result of fibrin interaction with naturally occurring components of the vascular basement membrane and subendothelial structures. Of the basement membrane components, type IV collagen produces the greatest structural modification, generating thick fibrin fibers; a 3-fold increase in the fiber mass/length ratio occurs when type IV collagen is increased from 0 to 100 ng/ml. Laminin and dermatan sulfate decrease the fibrin fiber mass/length ratio resulting in thinner fibers. However, the overall effect of the basement membrane on fibrin is to increase the fibrin fiber diameter. Electrophoretic light scattering and the binding of type IV collagen by fibrinogen-Sepharose further establish the interaction between type IV collagen and fibrinogen. Incorporation of laminin with type IV collagen onto coated surfaces decreases the ability of type IV collagen to bind fibrinogen. These studies emphasize that the final fibrin structure is influenced by the milieu in which the clot is assembled.     

Fibrin Fiber Stiffness Is Strongly Affected by Fiber Diameter,but Not by Fibrinogen Glycation

The major structural component of a blood clot is a mesh of fibrin fibers. Our goal was to determine whether fibrinogen glycation and fibrin fiber diameter have an effect on the mechanical properties of single fibrin fibers. We used a combined atomic force microscopy/fluorescence microscopy technique to determine the mechanical properties of individual fibrin fibers formed from blood plasma. Blood samples were taken from uncontrolled diabetic patients as well as age-, gender-, and body-mass-index-matched healthy individuals. The patients then underwent treatment to control blood glucose levels before end blood samples were taken. The fibrinogen glycation of the diabetic patients was reduced from 8.8 to 5.0 mol glucose/mol fibrinogen, and the healthy individuals had a mean fibrinogen glycation of 4.0 mol glucose/mol fibrinogen. We found that fibrinogen glycation had no significant systematic effect on single-fiber modulus, extensibility, or stress relaxation times. However, we did find that the fiber modulus, Y, strongly decreases with increasing fiber diameter, D, as Y ∝ D^?1.6. Thin fibers can be 100 times stiffer than thick fibers. This is unusual because the modulus is a material constant and should not depend on the sample dimensions (diameter) for homogeneous materials. Our finding, therefore, implies that fibrin fibers do not have a homogeneous cross section of uniformly connected protofibrils, as is commonly thought. Instead, the density of protofibril connections, ρ_Pb, strongly decreases with increasing diameter, as ρ_Pb ∝ D^?1.6. Thin fibers are denser and/or have more strongly connected protofibrils than thick fibers. This implies that it is easier to dissolve clots that consist of fewer thick fibers than those that consist of many thin fibers, which is consistent with experimental and clinical observations.     

Department of Protein Structure and Function--Volodimir Oleksandrovich Bielitser School of the Ukrainian Academy of Sciences. Studies on structure of fibrin fiber structure and mechanism (1975-1987

In this short historical review the records about foundation and research activity of the Department of Structure and Function of Protein--school of V. A. Belitser, Member of the National Academy of Sciences of Ukraine are presented. V. A. Belitser was the founder and indispensable chief of the department since the date of its creation (1944) till 1987. The main research interests (1975-1987) of the department were focused at the investigation of structure, biological function of the fibrinogen-fibrin system, mechanisms of the network assembly and of the fibrin fibers structure. Studying the molecular mechanisms of the fibrin fiber assembly, it was shown that the specificity of the building structure was shown is determined by the specific reactive sites with strong affinity of the molecules. The activity of the sites was investigated on protein molecules as well as the fragments. The physical nature of the bonds created by the active sites, that appearing during in the process of fibrinogen activation by thrombin, was revealed. Examination of the fibrin assembly in cooperation with electronmicroscopists and studies of the complex formation between active fragments and fibrin monomer were summarized. Both the fibrin monomer polymerization and protofibril lateral association are presented as two stages in the assembly of the fibrin network. In the research of the domain fibrinogen structure the specific sites of the fibrin assembly in each of the domains were found. COOH-terminal regions of the A alpha-chains play independent part in the fibrinogen and fibrin. That is why it is relevant to consider them as alpha C-domains. In the free fibrinogen molecules (in solution) these domains are responsible for globular shape, they are linked to domains D intramolecularly. When fibrin assembly takes place, alpha C-domains play significant carriage role in fibrin molecules interaction, linking to domains D intermolecularly. The model of the fibrinogen molecule structure and the general scheme of the fibrin fibers network formation were proposed. Physico-chemical basics of a biological structure assembly were elucidated using the process of the fibrin self-assembly as an example. Much attention was devoted to the problems of practical medicine. The quantitative methods of fibrinogen, soluble fibrin and active fibrin/fibrinogen fragments estimation in blood plasma were developed.     

Lateral packing of protofibrils in fibrin fibers and fibrinogen polymers

The distinctive transverse banding pattern of fibrin fibers clearly indicates ordering of molecules in the longitudinal direction. In this study we examined the fibers of fibrin clots, as well as two types of fibrinogen polymers, by thin-section electron microscopy. The fibrinogen polymers have a transverse banding pattern identical to that of fibrin fibers—clearly indicating a regular longitudinal repeat—but they are larger in diameter, and show little or no branching. We therefore expected their overall ordering to be better than that of fibrin fibers. Several different fixation protocols were used. We readily observed the typical transverse banding seen previously by negative stain and metal replication techniques. However, only very rarely was any regular lateral lattice seen in any of the samples. X-ray diffraction was used to examine unfixed specimens of the two fibrinogen polymers and, once again, although a longitudinal repeat was evident, only rarely was evidence for lateral crystallinity seen. The electron-microscope and x-ray results showed that the needles and pellet fibers of fibrinogen have essentially the same internal architecture as thick fibrin fibers, and that all three types of polymer, although clearly transversely banded, have almost no crystallinity in their lateral protofibril packing.     

Fibrinogen beta-chain tyrosine nitration is a prothrombotic risk factor

Elevated levels of circulating fibrinogen are associated with an increased risk of atherothrombotic diseases although a causative correlation between high levels of fibrinogen and cardiovascular complications has not been established. We hypothesized that a potential mechanism for an increased prothrombotic state is the post-translational modification of fibrinogen by tyrosine nitration. Mass spectrometry identified tyrosine residues 292 and 422 at the carboxyl terminus of the beta-chain as the principal sites of fibrinogen nitration in vivo. Immunoelectron microscopy confirmed the incorporation of nitrated fibrinogen molecules in fibrin fibers. The nitration of fibrinogen in vivo resulted in four distinct functional consequences: increased initial velocity of fibrin clot formation, altered fibrin clot architecture, increased fibrin clot stiffness, and reduced rate of clot lysis. The rate of fibrin clot formation and clot architecture was restored upon depletion of the tyrosine-nitrated fibrinogen molecules. An enhanced response to the knob "B" mimetic peptides Gly-His-Arg-Pro(am) and Ala-His-Arg-Pro(am) suggests that incorporation of nitrated fibrinogen molecules accelerates fibrin lateral aggregation. The data provide a novel biochemical risk factor that could explain epidemiological associations of oxidative stress and inflammation with thrombotic complications.     

The effect of fibrin structure on fibrinolysis.

Fibrin structure contributes to the regulation of the fibrinolytic rate. As the fibrin fiber size is decreased, the fibrinolytic rate also decreases. Fibrin structure was altered by either changing the ratio of thrombin to fibrinogen, i.e. altering the assembly rate or by adding a fibrin assembly inhibitor, iopamidol. Changes in the fibrinolytic rate were followed by measuring the time dependence of the decrease in the fiber mass/length ratio during fibrinolysis. A measure of the overall fibrinolytic rate was determined from the decrease in the mass/length ratio versus time. An 8-fold reduction in the fibrinolytic rate was seen on decreasing the mass/length ratio from 2.7 x 10(12) daltons/cm to 0.5 x 10(12) daltons/cm. It is shown that thin fibrin fibers have a decreased rate of conversion of plasminogen to plasmin by tissue plasminogen activator and that thin fibrin fibers are lysed more slowly than thick fibrin fibers.     

α-α Cross-links increase fibrin fiber elasticity and stiffness

Fibrin fibers, which are ~100 nm in diameter, are the major structural component of a blood clot. The mechanical properties of single fibrin fibers determine the behavior of a blood clot and, thus, have a critical influence on heart attacks, strokes, and embolisms. Cross-linking is thought to fortify blood clots; though, the role of α-α cross-links in fibrin fiber assembly and their effect on the mechanical properties of single fibrin fibers are poorly understood. To address this knowledge gap, we used a combined fluorescence and atomic force microscope technique to determine the stiffness (modulus), extensibility, and elasticity of individual, uncross-linked, exclusively α-α cross-linked (γQ398N/Q399N/K406R fibrinogen variant), and completely cross-linked fibrin fibers. Exclusive α-α cross-linking results in 2.5× stiffer and 1.5× more elastic fibers, whereas full cross-linking results in 3.75× stiffer, 1.2× more elastic, but 1.2× less extensible fibers, as compared to uncross-linked fibers. On the basis of these results and data from the literature, we propose a model in which the α-C region plays a significant role in inter- and intralinking of fibrin molecules and protofibrils, endowing fibrin fibers with increased stiffness and elasticity.     

Localization of the domains of fibrin involved in binding to platelets

The molecular basis of platelet-fibrin interactions has been investigated by using synthetic peptides as potential inhibitors of fibrin protofibril and fibrinogen binding to ADP-stimulated platelets, adhesion of fibrin fibers to the platelet surface, and platelet-mediated clot retraction. Synthetic peptides of sequence RGDS and HHLGGAKQAGDV, corresponding to regions of the fibrinogen alpha- and gamma-chains previously identified as platelet recognition sites, inhibited the binding of radiolabelled soluble fibrin oligomers to ADP-stimulated platelets with IC50 values of 10 and 40 microM, respectively. Synthetic GPRP and GHRP, corresponding to the N-terminal tripeptide sequence of the fibrin alpha-chains and the tetrapeptide sequence of the beta-chains, respectively, were minimally effective in blocking soluble fibrin polymer binding to ADP-stimulated platelets. Platelet functions which are unique to the three-dimensional fibrin network were examined by measurements of the extent of adhesion of fluorophore-labelled fibrin to platelets with a microfluorimetric technique and by light scattering measurements of the time course of clot retraction. Inhibition of fibrin-platelet adhesion by RGDS, HHLGGAKQAGDV and GHRP exhibited a similar, linear dependence reaching 1/2 maximum at about 200 microM, suggesting nonspecific effects. GPRP inhibited fibrin assembly but did not appear to have specific effects on fibrin-platelet adhesion. Only RGDS effected clot retraction, causing a 4-6-fold decrease in rate at 230 microM. These results indicate that fibrinogen and fibrin protofibrils, which are obligatory intermediates on the fibrin assembly pathway, share a set of common platelet recognition sites located at specific regions of the alpha- and gamma-chains of the multinodular fibrin(ogen) molecules. The RGDS site is also involved in mediating interactions between the three-dimensional fibrin network and stimulated platelets.     

High-resolution visualization of fibrinogen molecules and fibrin fibers with atomic force microscopy

We report an atomic force microscopy (AFM) study of fibrinogen molecules and fibrin fibers with resolution previously achieved only in few electron microscopy images. Not only are all objects triads, but the peripheral D regions are resolved into the two subdomains, apparently corresponding to the βC and γC domains. The conformational analysis of a large population of fibrinogen molecules on mica revealed the two most energetically favorable conformations characterized by bending angles of ～100 and 160 degrees. Computer modeling of the experimental images of fibrinogen molecules showed that the AFM patterns are in good agreement with the molecular dimensions and shapes detected by other methods. Imaging in different environments supports the expected hydration of the fibrinogen molecules in buffer, whereas imaging in humid air suggests the 2D spreading of fibrinogen on mica induced by an adsorbed water layer. Visualization of intact hydrated fibrin fibers showed cross-striations with an axial period of 24.0 ± 1.6 nm, in agreement with a pattern detected earlier with electron microscopy and small-angle X-ray diffraction. However, this order is clearly detected on the surface of thin fibers and becomes less discernible with the fiber's growth. This structural change is consistent with the proposal that thinner fibers are denser than thicker ones, that is, that the molecule packing decreases with the increasing of the fibers' diameter.     

Formation of fibrin gel in fibrinogen-thrombin system: static and dynamic light scattering study

The dynamics of thrombin-induced fibrin gel formation was investigated by means of static and dynamic light scattering. The decay time distribution function, obtained by the dynamic light scattering, clearly revealed a stepwise gelation process: the formation of fibrin and protofibril from fibrinogen followed by the lateral aggregation of protofibrils to form fibrin fibers and the formation of a three-dimensional network consisting of fibers. This conversion process was correlated with the angular dependence of the scattered light intensity (static light scattering). The correlation function of dynamic light scattering was analyzed in terms of sol-gel transition and gel structure. The correlation function showed a stretched exponential type behavior before the sol to gel transition point, and it showed a power law behavior at the gelation point.     

Fibrinogen Dusart: electron microscopy of molecules, fibers and clots, and viscoelastic properties of clots.

Ultrastructural perturbations resulting from defects in polymerization of fibrinogen Dusart, a congenital dysfibrinogenemia with the amino acid substitution A alpha 554 arginine to cysteine, were investigated by a variety of electron microscope studies. Polymerization of this mutant fibrinogen on addition of thrombin is impaired, producing clots with decreased porosity and increased resistance to fibrinolysis, resulting in thrombotic complications in the family members with this dysfibrinogenemia. Electron microscopy of rotary-shadowed individual molecules revealed that, in contrast to control fibrinogen, most of the alpha C domains of fibrinogen or fibrin Dusart appeared to be free-swimming appendages that do not exhibit intra- or intermolecular interactions either with each other or with the central domains. The location of albumin on the alpha C domains was demonstrated by electron microscopy using anti-albumin antibodies. Electron microscopy of negatively contrasted fibrin Dusart fibers indicated that they were less ordered than control fibers and had additional mass visible. Electron microscopy of freeze-dried, unidirectionally shadowed fibers showed that they were twisted with a shorter pitch. Scanning electron microscopy revealed that intact clots were made up of thin fibers with many branch points and very small pore sizes. The viscoelastic properties of Dusart fibrin clots measured with a torsion pendulum indicated a marked increase in stiffness consistent with the structural observations.     

Native fibrin gel networks observed by 3D microscopy, permeation and turbidity

Native fully hydrated fibrin gels formed at different fibrinogen and thrombin concentrations and at different ionic strengths were studied by confocal laser 3D microscopy, liquid permeation and turbidity. The gels were found to be composed of straight rod-like fiber elements that often came together at denser nodes. In gels formed at high fibrinogen concentrations, or with high amounts of thrombin, the spaces between the fibers decreased, indicating a decrease of gel porosity. The fiber strands were also shorter. Gel porosity decreased dramatically in gels formed at the high ionic strengths. Shorter fibers were observed and fiber swelling occurred at ionic strengths above 0.24. Quantitative parameters for gel porosity, fiber mass/length ratio and diameter were also derived by liquid permeation and turbidometric analyses of the gels. Permeation analysis showed that gel porosity (measured as Ks) decreased in gels formed at higher fibrin and thrombin concentrations in agreement with the porosity observed by microscopy. The turbidometric analysis showed good agreement with the permeation data for gels formed at various thrombin concentrations, but supported the permeation data more poorly in gels formed at different fibrinogen concentrations, especially above 2.5 mg/ml. Turbidometric analysis showed that the fiber mass/length ratio and diameter decreased in gels formed at ionic strength up to 0.24, as was seen in the permeation study. However, at higher ionic strengths swelling of the fibers was suggested from the gel turbidity data and this was also indicated by microscopy. These findings are discussed in relation to previous hydrodynamic and electron microscopic studies of fibrin gels.     

Elastic Behavior and Platelet Retraction in Low- and High-Density Fibrin?Gels

Fibrin is a biopolymer that gives thrombi the mechanical strength to withstand the forces imparted on them by blood flow. Importantly, fibrin is highly extensible, but strain hardens at low deformation rates. The density of fibrin in clots, especially arterial clots, is higher than that in gels made at plasma concentrations of fibrinogen (3–10 mg/mL), where most rheology studies have been conducted. Our objective in this study was to measure and characterize the elastic regimes of low (3–10 mg/mL) and high (30–100 mg/mL) density fibrin gels using shear and extensional rheology. Confocal microscopy of the gels shows that fiber density increases with fibrinogen concentration. At low strains, fibrin gels act as thermal networks independent of fibrinogen concentration. Within the low-strain regime, one can predict the mesh size of fibrin gels by the elastic modulus using semiflexible polymer theory. Significantly, this provides a link between gel mechanics and interstitial fluid flow. At moderate strains, we find that low-density fibrin gels act as nonaffine mechanical networks and transition to affine mechanical networks with increasing strains within the moderate regime, whereas high-density fibrin gels only act as affine mechanical networks. At high strains, the backbone of individual fibrin fibers stretches for all fibrin gels. Platelets can retract low-density gels by >80% of their initial volumes, but retraction is attenuated in high-density fibrin gels and with decreasing platelet density. Taken together, these results show that the nature of fibrin deformation is a strong function of fibrin fiber density, which has ramifications for the growth, embolization, and lysis of thrombi.     

Evidence that αC region is origin of low modulus, high extensibility, and strain stiffening in fibrin fibers

Fibrin fibers form the structural scaffold of blood clots and perform the mechanical task of stemming blood flow. Several decades of investigation of fibrin fiber networks using macroscopic techniques have revealed remarkable mechanical properties. More recently, the microscopic origins of fibrin's mechanics have been probed through direct measurements on single fibrin fibers and individual fibrinogen molecules. Using a nanomanipulation system, we investigated the mechanical properties of individual fibrin fibers. The fibers were stretched with the atomic force microscope, and stress-versus-strain data was collected for fibers formed with and without ligation by the activated transglutaminase factor XIII (FXIIIa). We observed that ligation with FXIIIa nearly doubled the stiffness of the fibers. The stress-versus-strain behavior indicates that fibrin fibers exhibit properties similar to other elastomeric biopolymers. We propose a mechanical model that fits our observed force extension data, is consistent with the results of the ligation data, and suggests that the large observed extensibility in fibrin fibers is mediated by the natively unfolded regions of the molecule. Although some models attribute fibrin's force-versus-extension behavior to unfolding of structured regions within the monomer, our analysis argues that these models are inconsistent with the measured extensibility and elastic modulus.     

Altered structure and function of fibrinogen after cleavage by Factor VII Activating Protease (FSAP)

Factor VII Activating Protease (FSAP) is a plasma protease affecting both coagulation and fibrinolysis. Although a role in hemostasis is still unclear, the identification of additional physiologic substrates will help to elucidate its role in this context. FSAP has been reported to cleave fibrinogen, but the functional consequences of this are not known. We have therefore undertaken this study to determine the implications of this cleavage for fibrin-clot formation and its lysis. Treatment of human fibrinogen with FSAP released an N-terminal peptide from the Bβ chain (Bβ1-53) and subsequently the fibrinopeptide B; within the Aα chain a partial truncation of the αC-region by multiple cleavages was seen. The truncated fibrinogen showed a delayed thrombin-catalyzed polymerization and formed fibrin clots of reduced turbidity, indicative of thinner fibrin fibers. Confocal laser scanning and scanning electron microscopy of these clots revealed a less coarse fibrin network with thinner fibers and a smaller pore size. A lower pore size was also seen in permeability studies. Unexpectedly, FSAP-treated fibrinogen or plasma exhibited a significantly faster tPA-driven lysis, which correlated exclusively with cleavage of fibrinogen and not with activation of plasminogen activators. Similar observations were also made in plasma after activation of endogenous zymogen FSAP, but not in plasma of carrier of the rare Marburg I single nucleotide polymorphism. In conclusion, altering fibrin clot properties by fibrinogenolysis is a novel function of FSAP in the vasculature, which facilitates clot lysis and may in vivo contribute to reduced fibrin deposition during thrombosis.     

Neutrophils in Oral Paracoccidioidomycosis and the Involvement of Nrf2

Neutrophils have been implicated in granuloma formation in several infectious diseases, in addition to their main phagocytic and pathogen destruction role. It has been demonstrated that Nrf2 regulates antioxidant protection in neutrophils, attenuating inflammation without compromising the hosts bacterial defense. In this study, we analyzed the presence of neutrophils in Paracoccidioides brasiliensis mycosis (PCM), as well as the immunoexpression of Nrf2. Thirty-nine cases of oral PCM were classified according to quantity of fungi and to the presence of loose or well-organized granulomas and microabscesses. An Nrf2 antibody was used for immunohistochemical analysis. The results showed that neutrophils are present in microabscesses and loose granulomas, but were absent in structured granulomas. A greater quantity of fungi was shown in cases with only loose granulomas when compared to loose and well organized granulomas. Nrf2 was observed in the nuclei of neutrophils of loose granulomas and abscesses, with its expression in loose granulomas maintained despite the additional presence of well organized granulomas in the same specimen. This study suggests that neutrophils participate in P. brasiliensis granuloma formation and that Nrf2 has a possible role in neutrophil survival, via modulation of the inflammatory response.     

The ultrastructure of fibrinogen-420 and the fibrin-420 clot

Fibrinogen-420 is a minor subclass of human fibrinogen that is so named because of its higher molecular weight compared to fibrinogen-340, the predominant form of circulating fibrinogen. Each of the two Aalpha chains of fibrinogen-340 is replaced in fibrinogen-420 by an Aalpha isoform termed alphaE. Such chains contain a globular C-terminal extension, alphaEC, that is homologous with the C-terminal regions of Bbeta and gamma chains in the fibrin D domain. The alphaEC domain lacks a functional fibrin polymerization pocket like those found in the D domain, but it does contain a binding site for beta2 integrins. Electron microscopy of fibrinogen-340 molecules showed the major core fibrinogen domains, D-E-D, plus globular portions of the C-terminal alphaC domains. Fibrinogen-420 molecules had two additional globular domains that were attributable to alphaEC. Turbidity measurements of thrombin-cleaved fibrinogen-420 revealed a reduced rate of fibrin polymerization and a lower maximum turbidity. Thromboelastographic measurements also showed a reduced rate of fibrin-420 polymerization (amplitude development) compared with fibrin-340. Nevertheless, the final amplitude (MA) and the calculated elastic modulus (G) for fibrin-420 were greater than those for fibrin-340. These results suggested a greater degree of fibrin-420 branching and thinner matrix fibers, and such structures were found in SEM images. In addition, fibrin-420 fibers were irregular and often showed nodular structures protruding from the fiber surface. These nodularities represented alphaEC domains, and possibly alphaC domains as well. TEM images of negatively shadowed fibrin-420 networks showed irregular fiber borders, but the fibers possessed the same 22.5-nm periodicity that characterizes all fibrin fibers. From this result, we conclude that fibrin-420 fiber assembly occurs through the same D-E interactions that drive the assembly of all fibrin fibrils, and therefore that the staggered overlapping molecular packing arrangement is the same in both types of fibrin. The alphaEC domains are arrayed on fiber surfaces, and in this location, they would very likely slow lateral fibril association, causing thinner, more branched fibers to form. However, their location on the fiber surface would facilitate cellular interactions through the integrin receptor binding site.     

The effect of “aging” of fibrinogen molecule on the structure and properties of fibrin gel

The effect of molecular “aging” of fibrinogen stimulated by preincubation in solution on the fibrin three-dimensional architecture, its ability to crosslink fibrin-stabilizing factor, and the sensitivity of fibringel to plasmin hydrolysis have been studied. The method of elastic light scattering was used to demonstrate that fibrin generated from “defective” fibrinogen had a coarser structure with a higher mean mass-length ratio of polymeric fibers compared to native fibrinogen (2.24 × 10⁹ and 1.46 × 10⁹ g/(mol cm), respectively). Crosslinking had no effect on the architecture of both control and experimental fibrin samples. Spectrophotometric and electrophoretic analysis has shown a higher sensitivity of coarse fibrin gels to plasmin. A close correlation between spontaneous local conformational reconstructions in fibrinogen molecule and its functional activity is concluded.     

Fibronectin alters the rate of formation and structure of the fibrin matrix

Plasma fibronectin is a vital component of the fibrin clot; however its role on clot structure is not clearly understood. The goal of this study was to examine the influence of fibronectin on the kinetics of formation, structural characteristics and composition of reconstituted fibrin clots or fibrin matrices. Fibrin matrices were formed by adding thrombin to 1, 2 or 4 mg/ml fibrinogen supplemented with 0–0.4 mg/ml fibronectin. The rate of fibrin matrix formation was then monitored by measuring light absorbance properties at different time points. Confocal microscopy of fluorescein conjugated fibrinogen was used to visualize the structural characteristics of fibrin matrices. The amount of fibronectin in fibrin matrices was determined through electrophoresis and immunoblotting of solubilized matrices. Fibronectin concentration positively correlated with the initial rate of fibrin matrix formation and with steady state light absorbance values of fibrin matrices. An increase in fibronectin concentration resulted in thinner and denser fibers in the fibrin matrices. Electrophoresis and immunoblotting showed that fibronectin was covalently and non-covalently bound to fibrin matrices and in the form of high molecular weight multimers. The formation of fibronectin multimers was attributed to cross-linking of fibronectin by trace amounts Factor XIIIa. These findings are novel because they link results from light absorbance studies to microcopy analyses and demonstrate an influence of fibronectin on fibrin matrix structural characteristics. This data is important in developing therapies that destabilize fibrin clots.     

Fragment E derived from both fibrin and fibrinogen stimulates interleukin-6 production in rat peritoneal macrophages

Fibrin derived from fibrinogen after thrombin cleavage plays an essential role in forming blood clots. Fibrin as well as fibrinogen is also involved in the induction of platelet aggregation, leukocyte cell adhesion and phagocytosis. An additional biological role of fibrin and fibrinogen is presented in this study. One of the proteolytic peptides of fibrin/fibrinogen, fragment E, and not fragment D, was able to stimulate rat peritoneal macrophages to express interleukin-6 (IL-6). The stimulation of fibrin/fibrinogen fragment E on macrophages appeared to work in a dose- and time-dependent manner. Adherent fibrin fragment E was able to stimulate IL-6 expression as well as IL-6 protein production. The effect of fibrin fragment E was inhibited by the addition of an excess amount of GPRP tetrapeptide, but not by GHRP, which are the amino acids derived from the amino terminus of fibrin alpha and beta chains, respectively. These results suggest that fibrin as well as fibrinogen function as a stimulator to macrophages, and leukocyte integrin p150,95 (CD11c/ CD18), not Mac-I (CD11b/CD18), is involved in mediating fibrin stimulatory activity in macrophages.