Synthesis and coordination of the bifunctionalized ylides Ph2P(CH2)n(Ph)2PCHCOOMe (n = 1, 2) and ketenylidene Ph2P(CH2)2(Ph)2PCCO to Pd and Pt complexes

In this paper it is reported the synthesis of the phosphonium salts [Ph₂P(CH₂)_n(Ph)₂PCH₂COOMe]Br (n = 1 (1), 2 (2)) and [Ph₂P(CH₂COOMe)(CH₂)_n(Ph)₂PCH₂COOMe]Br₂ (n = 3 (3)) derived from the reactions of the diphosphines dppm, dppe and dppp with methyl bromoacetate. By reaction of the monophosphonium salt of dppm and dppe with the strong base Na[N(SiMe₃)₂] the corresponding carbonyl stabilized ylides Ph₂P(CH₂)_n(Ph)₂PCHCOOMe (n = 1 (4), 2 (5)) were obtained. The Ph₂P(CH₂)₂(Ph)₂PCHCOOMe (5) ylide was reacted with Pd(II) and Pt(II) substrates. From these reactions were isolated exclusively complexes in which the ylide was chelated to the metal through the free phosphine group and the ylidic carbon atom. A further reaction of the Ph₂P(CH₂)₂(Ph)₂PCHCOOMe (5) ylide with 1.5 equiv. of Na[N(SiMe₃)₂] gives the bifunctionalized ketenylidene Ph₂P(CH₂)₂(Ph)₂PCCO (6) system. This cumulenic ylide reacts with Pt(II) complexes to form a chelated derivative in which IR and NMR spectra suggest the breaking of the CC bond of the -CCO group.     

Kinetic studies on the reactions of HCl with trans-[MoL(CNPh)(Ph2PCH2CH2PPh2)2] (L=N2, H2 or CO)

The kinetics of the reactions between anhydrous HCl and trans-[MoL(CNPh)(Ph₂PCH₂CH₂PPh₂)₂] (L=CO, N₂ or H₂) have been studied in thf at 25.0 °C. When L=CO, the product is [MoH(CO)(CNPh)(Ph₂PCH₂CH₂PPh₂)₂]⁺, and when L=H₂ or N₂ the product is trans-[MoCl(CNHPh)(Ph₂PCH₂CH₂PPh₂)₂]. Using stopped-flow spectrophotometry reveals that the protonation chemistry of trans-[MoL(CNPh)(Ph₂PCH₂CH₂PPh₂)₂] is complicated. It is proposed that in all cases protonation occurs initially at the nitrogen atom of the isonitrile ligand to form trans-[MoL(CNHPh)(Ph₂PCH₂CH₂PPh₂)₂]⁺. Only when L=N₂ is this single protonation sufficient to labilise L to dissociation, and subsequent binding of Cl⁻ gives trans-[MoCl(CNHPh)(Ph₂PCH₂CH₂PPh₂)₂]. At high concentrations of HCl a second protonation occurs which inhibits the substitution. It is proposed that this second proton binds to the dinitrogen ligand. When L=CO or H₂, a second protonation is also observed but in these cases the second protonation is proposed to occur at the carbon atom of the aminocarbyne ligand, generating trans-[MoL(CHNHPh)(Ph₂PCH₂CH₂PPh₂)₂]²⁺. Addition of the second proton labilises the trans-H₂ to dissociation, and subsequent rapid binding of Cl⁻ and dissociation of a proton yields the product trans-[MoCl(CNHPh)(Ph₂PCH₂CH₂PPh₂)₂]. Dissociation of L=CO does not occur from trans-[Mo(CO)(CHNHPh)(Ph₂PCH₂CH₂PPh₂)₂]²⁺, but rather migration of the proton from carbon to molybdenum, and dissociation of the other proton produces [MoH(CO)(CNPh)(Ph₂PCH₂CH₂PPh₂)₂]⁺.     

Synthesis and characterization of silver(I) derivatives containing acylpyrazolonate and phosphino ligands: X-ray crystal structures of monomeric [Ag(Q)(PPh3)2] and of dimeric [{Ag(Q)(PiBu3)}2] (Q = 1-phenyl-3-methyl-4-tert-butylacetylpyrazolon-5-ato)

New silver(I) acylpyrazolonate derivatives [Ag(Q)], [Ag(Q)(PR₃)]₂ and [Ag(Q)(PR₃)₂] (HQ = 1-R¹-3-methyl-4-R²(CO)pyrazol-5-one, HQ^Bn = R¹ = C₆H₅, R² = CH₂C₆H₅; HQ^CHPh2 = R¹ = C₆H₅, R² = CH(C₆H₅)₂; HQ^nPe = R¹ = C₆H₅, R² = CH₂C(CH₃)₃; HQ^tBu = R¹ = C₆H₅, R² = C(CH₃)₃; HQ^fMe = R¹ = C₆H₄-p-CF₃, R² = CF₃; HQ^fEt = R¹ = C₆H₅, R² = CF₂CF₃; R = Ph or iBu) have been synthesized and characterized in the solid state and solution. The crystal structure of 1-(4-trifluoromethylphenyl)-3-methyl-5-pyrazolone, the precursor of proligand HQ^fMe and of derivatives [Ag(Q^nPe)(PPh₃)₂] and [Ag(Q^nPe)(PiBu₃)]₂ have been investigated. [Ag(Q^nPe)(PPh₃)₂] is a mononuclear compound with a silver atom in a tetrahedrally distorted AgO₂P₂ environment, whereas [Ag(Q^nPe)(PiBu₃)]₂ is a dinuclear compound with two O₂N-exotridentate bridging acylpyrazolonate ligands connecting both silver atoms, their coordination environment being completed by a phosphine ligand.     

New aryl phosphinite ligands avoiding ortho-metallation: Synthesis and molecular structures of trans-[PdCl2(PPh2OR)2] and trans-[Rh(CO)Cl(PPh2OR)2] (R = 2,4,6-Me3C6H2; 2,6-Ph2C6H3)

The new aryl phosphinites PPh₂OR (R = 2,4,6-Me₃C₆H₂, 1; R = 2,6-Ph₂C₆H₃, 2) have been prepared from chlorodiphenylphosphine and the corresponding phenols. In these ligands, the ortho-positions of the aromatic phosphite function are blocked by methyl and phenyl substituents, which allows coordination to metal centres without ortho-metallation. Thus, reaction with [PdCl₂(cod)] leads to the complexes trans-[PdCl₂(PPh₂OR)₂] (R = 2,4,6-Me₃C₆H₂, 3; R = 2,6-Ph₂C₆H₃, 4), while the reaction with [Rh₂(CO)₄Cl₂] gives trans-[Rh(CO)Cl(PPh₂OR)₂] (R = 2,4,6-Me₃C₆H₂, 5; R = 2,6-Ph₂C₆H₃, 6). The single-crystal X-ray structure analyses of 3 and 5 confirm the trans-coordination of the new ligands in these square-planar complexes.     

Syntheses and luminescence behavior of tetranuclear copper(I) diynyl complexes: X-ray crystal structure of [Cu4(PPh3)4(μ3-η-CCCCPh)4]

A series of luminescent tetranuclear cuboidal copper(I) diynyl complexes, [Cu₄(PAr₃)₄(μ₃-η¹-CCCCR′)₄] (Ar=Ph, R′=Ph, C₆H₄CH₃-p, C₆H₄OCH₃-p; Ar=C₆H₄CH₃-p, C₆H₄F-p, R′=Ph) has been synthesized and characterized. The X-ray crystal structure of [Cu₄(PPh₃)₄(μ₃-η¹-CCCCPh)₄] has been determined. The origin of the low-energy emission in the complexes is assigned as derived from a metal-centered 3d⁹4s¹ state, mixed with LMCT [diynyl→Cu₄] and IL [π-π*(diynyl)] states.     

Comparative properties of fluorous phosphine ligand complexes: W(CO)5L. Crystal structure of W(CO)5P(C6H4-4-CH2CH2(CF2)7CF3)3

The compounds W(CO)₅P(C₆H₄-4-CH₂CH₂(CF₂)₇CF₃)₃ (1) and W(CO)₅P(CH₂CH₂(CF₂)₅CF₃)₃ (2) were synthesized in order to probe the electronic and physical effects of ligation by perfluorocarbon substituted tertiary phosphine ligands in a W(CO)₅L complex. The π-accepting ability of the fluorous phosphines was found to rank with non-fluorous comparators as P(CH₂CH₂(CF₂)₅CF₃)₃ > P(C₆H₄-4-CH₂CH₂(CF₂)₇CF₃)₃ > PPh₃ > P(p-tolyl)₃ > P(n-octyl)₃. The X-ray crystal structure of W(CO)₅P(C₆H₄-4-CH₂CH₂(CF₂)₇CF₃)₃ shows strong intermolecular association of fluorous components but confirms that the para fluorocarbon subtituents have an insignificant effect on the tungsten coordination environment. Partition coefficients (toluene/perfluoromethylcyclohexane) were measured for compounds 1 and 2.     

O-Alkylthio- and O-alkylselenooxalate iron complexes: Structures of CpFe(CO)2ECOCO2Me and [CpFe(CO)2ECO]2

When the iron sulfide complexes (μ-S_x)[CpFe(CO)₂]₂ (x = 2, 3) are treated with O-alkyl oxalyl chlorides ROCOCOCl the complexes CpFe(CO)₂SCOCO₂R (1) [R = Me (a), Et (b)] are obtained. Similarly, the complexes CpFe(CO)₂SeCOCO₂R (2) are obtained from the analogous iron selenide (μ-Se)[CpFe(CO)₂]₂ reaction with the same reagents. Treatment of the iron selenide with half equivalent of oxalyl chloride produces the dimeric complex [CpFe(CO)₂SeCO]₂ (3). The new complexes, 1, 2 and 3, have been characterized by elemental analyses, IR and ¹H NMR spectroscopy. The solid state structures of 1a, 2a, 3 and [CpFe(CO)₂SCO]₂ (4) were determined by an X-ray crystal structure analysis.     

Electrochemical behavior of S,S-bridged adducts of square planar metalladithiolene complexes [M(S2C2Ph2)2](M=Ni, Pd, and Pt)

The electrochemical behavior of the S,S^′-bridged adducts of square planar metalladithiolene complexes was investigated by using cyclic voltammetry and electrochemical spectroscopies (visible, near-IR, and ESR). The norbornene-bridged S,S^′-adduct [Ni(S₂C₂Ph₂)₂(C₇H₈)] (2a; C₇H₈=norbornene) formed by [Ni(S₂C₂Ph₂)₂] (1a) and quadricyclane (Q) was dissociated by an electrochemical reduction, and anion 1a⁻ and norbornadiene (NBD) were formed. Q was isomerized to NBD in the overall reaction. The o-xylyl-bridged S,S^′-adduct [Ni(S₂C₂Ph₂)₂(CH₂)₂(C₆H₄)] (3a; (CH₂)₂(C₆H₄)=o-xylyl) was also dissociated by an electrochemical reduction, and this reaction gave the o-xylyl radical (o-quinodimethane). The reduction of complex 3a in the presence of excess o-xylylene dibromide underwent the catalytic formation of o-quinodimethane. The butylene-bridged S,S^′-adduct [Ni(S₂C₂Ph₂)₂(CH₂)₄] (4a; (CH₂)₄=butylene) was stable on an electrochemical reduction. The lifetimes of reduced species of these adducts 2a-4a were influenced by the stability of the eliminated group (stability: NBD > o-xylyl radical (o-quinodimethane) > butylene radical). Therefore, the reduced species are stable in the sequence 4a⁻ > 3a⁻ > 2a⁻. Although the palladium complex [Pd(S₂C₂Ph₂)₂] (1b) was easier to reduce than the nickel complex 1a or the platinum complex [Pt(S₂C₂Ph₂)₂] (1c), their S,S^′-adducts were easier to reduce in the order of Ni adduct > Pd adduct > Pt adduct.     

Ru2(CO)4(OOCR)2L2 sawhorse-type complexes containing axial 5-(4-pyridyl)-10,15,20-triphenylporphyrin ligands

The thermal reaction of Ru₃(CO)₁₂ with various carboxylic acids (benzoic, 4-hydroxyphenylacetic, ferrocenic, stearic, oleic, 4-(octadecyloxy)benzoic) in refluxing tetrahydrofuran, followed by addition of 5-(4-pyridyl)-10,15,20-triphenylporphyrin (L), gives the dinuclear complexes Ru₂(CO)₄(OOCR)₂L₂ (1: R = -C₆H₅, 2: R = -CH₂-p-C₆H₄OH, 3: R = -C₅H₄FeC₅H₅, 4: R = -(CH₂)₁₆CH₃, 5: R = -(CH₂)₇CHCH(CH₂)₇CH₃, 6: R = -p-C₆H₄O(CH₂)₁₇CH₃). Complexes 1-6 were characterised by IR, NMR, and ESI-MS as well as by elemental analysis. The UV-Vis spectra show the Soret band centred at 417 nm and the Q bands at 515, 550, 590 and 645 nm, respectively.     

Aerosol-assisted chemical vapour deposition (AACVD) of silver films from triorganophosphine adducts of silver carboxylates, including the structure of [Ag(O2CC3F7)(PPh3)2]

Silver carboxylates [Ag(O₂CR): R=Me, ^tBu, 2,4,6-Me₃C₆H₂], fluorocarboxlyates [Ag(O₂CR_f): R_f=C₃F₇, C₆F₁₃, C₇F₁₅] and their phosphine adducts [Ag(O₂CR)·nPR₃′: R=Me, ^tBu, 2,4,6-Me₃C₆H₂, R′=Me, Ph, n=2; R=Me, R′=Me, n=3; Ag(O₂CR_f).2PPh₃, R_f=C₃F₇, C₆F₁₃, C₇F₁₅] have been synthesised, characterised spectroscopically and used as precursors in the aerosol-assisted chemical vapour deposition of silver films. All the phosphine adducts produced films, though in general PMe₃ adducts, proved more successful than PPh₃ analogues. The fluoro-carboxylates and their PPh₃ adducts all generated silver films, though the growth rate for the adducts was lower. All these latter films showed carbon impurities while fluorine was also evident in most cases. The X-ray structure of AgO₂CC₃F₇·2PPh₃ is also reported.     

Interactions of tertiary phosphines with p-benzoquinones; X-ray structures of [HO(CH2)3]3PC6H2(O)(OH)(MeO) and Ph3PC6H3(O)(OH)

Phosphonium zwitterions of a known type were obtained in high yield via a 1:1 reaction of p-benzoquinone or methoxy-p-benzoquinone with the tertiary phosphines R₃P [R = (CH₂)₃OH, Ph, Et, Me] and Ph₂MeP, in acetone or benzene at room temperature. In all cases, attack of the P-atom occurs at a C-atom rather than at an O-atom. The products were characterized to various degrees by elemental analysis, ³¹P{¹H}, ¹H and ¹³C NMR spectroscopies, and mass spectrometry, and two of the zwitterions, the new [HO(CH₂)₃]₃P⁺C₆H₂(O⁻)(OH)(MeO) and the known Ph₃P⁺C₆H₃(O⁻)(OH), were structurally characterized by X-ray analysis. The PEt₃ reaction also produces small amounts of the ‘dimeric’, μ-oxo co-product Et₃P⁺C₆H₂(O⁻)(OH)-O-C₆H₃(O⁻)P⁺Et₃ that is tentatively characterized by 1D- and 2D-NMR data. 2,5-Di-tert-butyl- and 2,3,5,6-tetramethyl-p-benzoquinone do not react with [HO(CH₂)₃]₃P under the conditions noted above. Heating D₂O solutions of the water-soluble zwitterions R₃P⁺C₆H₃(O⁻)(OH) [R = (CH₂)₃OH, Et] at 90 °C for 72 h leads to complete H/D exchange of the H-atom in the position ortho to the phosphonium center.     

Bifunctional chelates with mixed aromatic and aliphatic amine donors for labeling of biomolecules with the {Tc(CO)3} and {Re(CO)3} cores

A series of tridentate ligands consisting of mixed aromatic and aliphatic amine derivatives of single amino acid chelates and phenylpiperazine have been developed, and their reactions with [NEt₄]₂[ReBr₃(CO)₃] have been investigated. The compounds [Re(CO)₃{(NC₅H₄CH₂)NCH₃(C₂H₄)NHCH₃}]Br (4), [Re(CO)₃{(NC₅H₄CH₂)NCH₃(C₂H₄)NCH₃(CH₂)_xCOOC₂H₅}]Br (x = 1, 5; x = 4, 6) [Re(CO)₃{(NC₅H₄CH₂)NH(C₂H₄)N(CH₃)₂}]Br (7), [Re(CO)₃{(NC₅H₄CH₂)N(CH ₂COOC₂H₅)(C₂H₄)N(CH₃)₂}]Br (8) and [Re(CO)₃(NC₅H₄CH₂)(C₂H₄NH₂)N(CH₂)₃-CH₃Ophenpip]Br (9) (phenpip: phenylpiperazine, -C₆H₄-(CH₂CH₂)₂N-) were prepared and characterized by elemental analysis, NMR, IR, HSMS and X-ray crystallography. All complexes exhibit fac-{Re(CO)₃N₃} coordination geometry in the cationic molecular unit. Crystal data for C₁₃H₁₇BrN₃O₃Re (4): orthorhombic, Pbca, a = 13.4510(8) Å, b = 10.5728(6) Å, c = 22.5378(13) Å, V = 3205.2(3) ų, Z = 8; C₁₇H₂₃BrN₃O₅Re (5): orthorhombic, Pcca, a = 16.5907(7) Å,b = 14.8387(6) Å, c = 16.7075(7) Å, V = 4113.1(3) ų, Z = 8; C₁₃H₂₅BrN₃O₇Re (7 · 4H₂O): monoclinic, P2₁/n, a = 14.0698(17) Å, b = 9.6760(12) Å, c = 15.6099 (19) Å, β = 114.930(2)°, V = 1927.1(4) ų, Z = 4; C₁₇H₂₃BrN₃O₅Re (8): monoclinic, P2₁/n, a = 7.5312(5) Å, b = 16.0366(10) Å, c = 16.8741(10) Å, β = 98.9990(10)°, V = 2012.9(2) ų, Z = 4.     

Pyridine and phosphine reactions with [CPh3][B(C6F5)4]

Trityl borate salts [4-RPyCPh₃][B(C₆F₅)₄] (R = H 1, ^tBu 2, Et 3, NMe₂4) and [R₃PCPh₃][B(C₆F₅)₄] (R = Me 5, ⁿBu 6, Ph[1] 7, p-MeC₆H₄8) are readily prepared via equimolar reaction of the appropriate pyridine or phosphine and trityl borate [CPh₃][B(C₆F₅)₄]. The analogous reactions of PⁱPr₃ affords the product [(p-ⁱPr₃P-C₆H₄)Ph₂CH][B(C₆F₅)₄] (9) while the corresponding reactions of Cy₃P and ^tBu₃P gave the cyclohexadienyl derivatives [(p-R₃PC₆H₅)CPh₂][B(C₆F₅)₄] (R = Cy 10, ^tBu 11). X-ray structures of 5 and 9 are reported.     

Synthesis of 5,6-dihydro-4H-1,3-oxazines from neutral and cationic platinum(II) nitrile complexes. X-ray structure of trans-[Pt(CF3){ H2CH2}(PPh3)2]BF4

The 1,3-oxazine complexes cis- and trans-[PtCl₂{ C(R)OCH₂CH₂C}H₂₂] (cis: R=CH₃ (1a), CH₂CH₃ (2a), (CH3)₃C (3a), C₆H₅ (4a); trans:R =CH₃ (1b), C₆H₅ (4b)) were obtained in 51-71% yield by reaction in THF at 0 °C of the corresponding nitrile complexes cis- and trans-[PtCl2(NCR)₂] with 2 equiv. of ⁻OCH₂CH₂CH₂Cl, generated by deprotonation of 3-chloro-1-propanol with n-BuLi. The cationic nitrile complexes trans-[Pt(CF₃)(NCR)(PPh₃)₂]BF₄ (R=CH3, C₆H₅) react with 1 equiv, of ⁻ OCH2CH2CH2Cl to give a mixture of products, including the corresponding oxazine derivatives trans-[Pt(CF₃){ CH₂}(PPh₃)₂]BF₄ (5 and 6), the chloro complex _trans- [Pt(CF₃)Cl(PPh₃)₂] and free oxazine H2. For short reaction times (c. 5–15 min) the oxazine complexes 5 and 6 could be isolated in modest yield (37–49%) from the reaction mixtures and they could be separated from the corresponding chloro complex (yield 40%) by taking advantage of the higher solubility of the latter derivative in benzene. For longer reaction times (> 2 h), trans-[Pt(CF₃)Cl(PPh₃)₂] was the only isolated product. Complex 6 was crystallographically characterized and it was found to contain also crystals of trans- [PtCl{ H₂}(PPh₃)₂]BF₄, which prevented a more detailed analysis of the bond lengths and angles within the metal coordination sphere. The 1,3-oxazine ring, which shows an overall planar arrangement, is characterized by high thermal values of the carbon atoms of the methylene groups indicative of disordering in this part of the molecule in agreement with fast dynamic ring processes suggested on the basis of ¹H NMR spectra. It crystallizes in the trigonal space group P , with a=22.590(4), b=15.970(3) Å, γ=120°, V=7058(1) ų and Z=6. The structure was refined to R=0.059 for 3903 unique observed (I3σ(I)) reflections. A mechanism is proposed for the conversion of nitrile ligands to oxazines in Pt(II) complexes.     

Analysis of the main structural trends for biscyclometalated dinuclear rhodium compounds of general formula Rh2(O2CR)2(PC)2 · 2H2O

A new series of biscyclometalated dinuclear rhodium (II) compounds with the general formula Rh₂(O₂CR)₂(PC)₂ · 2H₂O, being PC = (C₆H₄)P(C₆H₅)₂, R = CH₃ (1 · 2H₂O), PC = [(p-CH₃ OC₆H₃)P(p-CH₃ OC₆H₄)₂], R = CF₃ (2 · 2H₂O), PC = (C₆H₄)P[CH(CH₃)₂]₂, R = CH₃ (3 · 2H₂O) and PC = (C₆H₄)P(C₆H₅)₂, R = C₆F₅ (4 · 2H₂O) has been obtained. The crystal structures for these compounds have been determined by X-ray diffraction and the main structural trends, bond lengths, bond angles and torsion angles have been analyzed, and have also been compared with the structural parameters for different analogous complexes described previously in the literature.     

Half-sandwich ruthenium thiocarbonate complexes: Structures of CpRu(PPh3)2SCO2Bu, CpRu(dppe)SCO2Bu and CpRu(PPh3)(CO)SCO2Bu

Thiocarbonate ruthenium complexes of the form CpRu(L)(L′)SCO₂R (L = L′ = PPh₃ (1), 1/2 dppe (2), L = PPh₃, L′ = CO (3); R = Et (a), Buⁿ (b), C₆H₅ (c), 4-C₆H₄NO₂ (d)) have been synthesized by the reaction of the corresponding sulfhydryl complexes, CpRu(L)(L′)SH, with chloroformates, ROCOCl, at low temperature. The bis(triphenylphosphine) complexes 1 can be converted to 3 under CO atmosphere. The crystal structures of CpRu(PPh₃)₂SCO₂Buⁿ (1b), CpRu(dppe)SCO₂Buⁿ (2b), and CpRu(PPh₃)(CO)SCO₂Buⁿ (3b) are reported.     

Synthesis and characterization of carbamoyl methyl pyrazole(CMPz) compounds of palladium(II) chloride: The crystal and molecular structure of [PdCl2{C3H3N2CH2CONBu2}2]

Carbamoyl methyl pyrazole compound of palladium(II) chloride of the type [PdCl₂L₂] (where L =  C₅H₇N₂CH₂CON(C₄H₉)₂, C₅H₇N₂CH₂CON(ⁱC₄H₉)₂, C₃H₃N₂CH₂CON(C₄H₉)₂, or C₃H₃N₂CH₂CON(ⁱC₄H₉)₂) has been synthesized and characterized by IR and ¹H NMR spectroscopy. The structure of the compound [PdCl₂{C₃H₃N₂CH₂CONⁱBu₂}₂] has been determined by single crystal X-ray diffraction and shows that the ligands are bonded through the soft pyrazolyl nitrogen atom to the palladium(II) chloride in a trans disposition.     

Syntheses and structures of the heterometallic clusters [(Ph3PAu)3Re(CO)4], [(Ph3PAu)4Re(CO)4], [(Ph3PAu)6AuRe2(CO)8], and [(Ph3PAu)6Re(CO)3]

The reaction of [HRe₃(CO)₁₂]²⁻ with an excess of Ph₃PAuCl in CH₂Cl₂ yields [(Ph₃PAu)₄Re(CO)₄]⁺ as the main product, which crystallizes as [(Ph₃PAu)₄Re(CO)₄]PF₆ · CH₂Cl₂ (1 · CH₂Cl₂) after the addition of KPF₆.The crystal structure determination reveals a trigonal bipyramidal Au₄Re cluster with the Re atom in equatorial position.If [(Ph₃PAu)₄Re(CO)₄]⁺ is reacted with PPh₄Cl, a cation [Ph₃PAu]⁺ is eliminated as Ph₃PAuCl, and the neutral cluster [(Ph₃PAu)₃Re(CO)₄] (2) is formed.It combines with excess [(Ph₃PAu)₄Re(CO)₄]⁺ to afford the cluster cation, [(Ph₃PAu)₆AuRe₂(CO)₈]⁺. It crystallizes from CH₂Cl₂ as[(Ph₃PAu)₆AuRe₂(CO)₈]PF₆ · 4CH₂Cl₂ (3 · 4CH₂Cl₂). In [(Ph₃PAu)₃Re(CO)₄] the metal atoms are arranged in form of a lozenge while in [(Ph₃PAu)₆AuRe₂(CO)₈]⁺ two Au₄Re trigonal bipyramids are connected by a common axial Au atom.The treatment of [(Ph₃PAu)₄Re(CO)₄]⁺ with KOH and Ph₃PAuCl in methanol yields the cluster cation [(Ph₃PAu)₆Re(CO)₃]⁺, which crystallizes with from CH₂Cl₂ as [(Ph₃PAu)₆Re(CO)₃]PF₆ · CH₂Cl₂ (4 · CH₂Cl₂). The metal atoms in this cluster form a pentagonal bipyramid with the Re atom in the axial position.     

‘Synthetic prospecting’ using an electrospray ionisation mass spectrometry directed survey of the alkylation and arylation chemistry of [Pt2(μ-S)2(PPh3)4]

Electrospray ionisation mass spectrometry (ESI-MS) has been used as an analytical tool in a wide-ranging scoping study of the alkylation and arylation reactions of [Pt₂(μ-S)₂(PPh₃)₄]. From these experiments, the factors that influence the formation of different product species - formed by mono- or di-alkylation - are determined. If the alkylating agent is an alkyl chloride or sulfate, monoalkylation followed by dialkylation of the two sulfido groups occurs, dependent on the alkylating power of the reagent used. For example, n-butyl chloride gives solely [Pt₂(μ-S)(μ-SBu)(PPh₃)₄]⁺ while dimethyl sulfate gives [Pt₂(μ-SMe)₂(PPh₃)₄]²⁺. This species, previously unisolated is stable in the absence of good nucleophiles, but the addition of potassium iodide results in rapid conversion to [Pt₂(μ-SMe)₂(PPh₃)₃I]⁺. This iodo complex is also observed from the reaction of [Pt₂(μ-S)₂(PPh₃)₄] with excess MeI, after the initial formation of mono- and di-methylated species. In these reactions, the iodide presumably displaces a phosphine ligand, which is then quaternised by excess alkylating agent. Changing the alkylating agent to a longer chain alkyl iodide or methyl bromide decreases the rate of alkylation of the sulfide in the initially formed [Pt₂(μ-S)(μ-SR)(PPh₃)₄]⁺. Mixed-thiolate species of the type [Pt₂(μ-SMe)(μ-SR)(PPh₃)₄]²⁺ are easily generated by reaction of [Pt₂(μ-S)(μ-SR)(PPh₃)₄]⁺ with excess Me₂SO₄ and is also dependent on the avoidance of nucleophiles. Reactions towards α,ω-dialkylating agents are surveyed; the chain length is found to have a dramatic effect on the rate of the second intramolecular cyclisation process, illustrated by a competitive reactivity study involving a mixture of Br(CH₂)₄Br and Br(CH₂)₅Br; on completion of the reaction the former gives [Pt₂{μ-S(CH₂)₄S}(PPh₃)₄]²⁺ while the latter predominantly gives monoalkylated[Pt₂(μ-S){μ-S(CH₂)₅Br}(PPh₃)₄]⁺. The reactivity of o- and p-dihaloxylenes has been explored, with the reaction with p-BrCH₂C₆H₄CH₂Br giving the bridged species [(PPh₃)₄Pt₂(μ-S)(μ-SCH₂C₆H₄CH₂S)(μ-S)Pt₂(PPh₃)₄]²⁺. Arylation reactions of [Pt₂(μ-S)₂(PPh₃)₄] with halobenzenes and 2-bromoheterocyclic compounds (pyridine, thiophene) are also described.     

Synthesis and characterization of amine complexes of the cyclopentadienyliron dicarbonyl complex cation, [Cp(CO)2Fe]

The organometallic Lewis acid, [CpFe(CO)₂]⁺ (Cp = η⁵-C₅H₅) reacts with excess dry diethyl ether at low temperatures to form the labile complex [CpFe(CO)₂(Et₂O)]⁺[BF₄]⁻ (1) which is stable at low temperatures and has been fully characterized. Complex 1 in turn reacts with 1-aminoalkanes and α,ω-diaminoalkanes to form new complexes of the type [CpFe(CO)₂NH₂(CH₂)_nCH₃]BF₄ (n = 2-6) (2) and [{CpFe(CO)₂}₂μ-(NH₂(CH₂)_nNH₂)](BF₄)₂ (n = 2-4) (3), respectively. These complexes have been fully characterized and the mass spectral patterns of complexes 2 are reported. The structures of compounds 2a (n = 2) and 2b (n = 3) have been confirmed by single crystal X-ray crystallography. The single crystal X-ray diffraction data show that complex 2a, [CpFe(CO)₂NH₂(CH₂)₂CH₃]BF₄, crystallizes in a triclinic space group while 2b, [CpFe(CO)₂NH₂(CH₂)₃CH₃]BF₄, crystallizes in an orthorhombic Pca2₁ space group with two crystallographically independent molecular cations in the asymmetric unit. Furthermore, the reaction of 1 with 1-alkenes gives the η²-alkene complexes in high yield.