Impact of carrier stiffness and microtopology on two-dimensional kinetics of P-selectin and P-selectin glycoprotein ligand-1 (PSGL-1) interactions

Mechanics and surface microtopology of the molecular carrier influence cell adhesion, but the mechanisms underlying these effects are not well understood. We used a micropipette adhesion frequency assay to quantify how the carrier stiffness and microtopology affected two-dimensional kinetics of interacting adhesion molecules on two apposing surfaces. Interactions of P-selectin with P-selectin glycoprotein ligand-1 (PSGL-1) were used to demonstrate such effects by presenting the molecules on three carrier systems: human red blood cells (RBCs), human promyelocytic leukemia HL-60 cells, and polystyrene beads. Stiffening the carrier alone or in cooperation with roughing the surface lowered the two-dimensional affinity of interacting molecules by reducing the forward rate but not the reverse rate, whereas softening the carrier and roughing the surface had opposing effects in affecting two-dimensional kinetics. In contrast, the soluble antibody bound with similar three-dimensional affinity to surface-anchored P-selectin or PSGL-1 constructs regardless of carrier stiffness and microtopology. These results demonstrate that the carrier stiffness and microtopology of a receptor influences its rate of encountering and binding a surface ligand but does not subsequently affect the stability of binding. This provides new insights into understanding the rolling and tethering mechanism of leukocytes onto endothelium in both physiological and pathological processes.     

Adhesion frequency assay for in situ kinetics analysis of cross-junctional molecular interactions at the cell-cell interface

The micropipette adhesion assay was developed in 1998 to measure two-dimensional (2D) receptor-ligand binding kinetics. The assay uses a human red blood cell (RBC) as adhesion sensor and presenting cell for one of the interacting molecules. It employs micromanipulation to bring the RBC into contact with another cell that expresses the other interacting molecule with precisely controlled area and time to enable bond formation. The adhesion event is detected as RBC elongation upon pulling the two cells apart. By controlling the density of the ligands immobilized on the RBC surface, the probability of adhesion is kept in mid-range between 0 and 1. The adhesion probability is estimated from the frequency of adhesion events in a sequence of repeated contact cycles between the two cells for a given contact time. Varying the contact time generates a binding curve. Fitting a probabilistic model for receptor-ligand reaction kinetics to the binding curve returns the 2D affinity and off-rate. The assay has been validated using interactions of Fcγ receptors with IgG Fc, selectins with glycoconjugate ligands, integrins with ligands, homotypical cadherin binding, T cell receptor and coreceptor with peptide-major histocompatibility complexes. The method has been used to quantify regulations of 2D kinetics by biophysical factors, such as the membrane microtopology, membrane anchor, molecular orientation and length, carrier stiffness, curvature, and impingement force, as well as biochemical factors, such as modulators of the cytoskeleton and membrane microenvironment where the interacting molecules reside and the surface organization of these molecules. The method has also been used to study the concurrent binding of dual receptor-ligand species, and trimolecular interactions using a modified model. The major advantage of the method is that it allows study of receptors in their native membrane environment. The results could be very different from those obtained using purified receptors. It also allows study of the receptor-ligand interactions in a sub-second timescale with temporal resolution well beyond the typical biochemical methods. To illustrate the micropipette adhesion frequency method, we show kinetics measurement of intercellular adhesion molecule 1 (ICAM-1) functionalized on RBCs binding to integrin α(L)β(2) on neutrophils with dimeric E-selectin in the solution to activate α(L)β(2).     

Differential involvement of the hyaluronan (HA) receptors CD44 and receptor for HA-mediated motility in endothelial cell function and angiogenesis.

Hyaluronan (HA), an important glycosaminoglycan constituent of the extracellular matrix, has been implicated in angiogenesis. It appears to exert its biological effects through binding interactions with at least two cell surface receptors: CD44 and receptor for HA-mediated motility (RHAMM). Recent in vitro studies have suggested potential roles for these two molecules in various aspects of endothelial function. However, the relative contribution of each receptor to endothelial functions critical to angiogenesis and their roles in vivo have not been established. We therefore investigated the endothelial expression of these proteins and determined the effects of antibodies against RHAMM and CD44 on endothelial cell (EC) function and in vivo angiogenesis. Both receptors were detected on vascular endothelium in situ, and on the surface of cultured EC. Further studies with active blocking antibodies revealed that anti-CD44 but not anti-RHAMM antibody inhibited EC adhesion to HA and EC proliferation, whereas anti-RHAMM but not CD44 antibody blocked EC migration through the basement membrane substrate, Matrigel. Although antibodies against both receptor inhibited in vitro endothelial tube formation, only the anti-RHAMM antibody blocked basic fibroblast growth factor-induced neovascularization in mice. These data suggest that RHAMM and CD44, through interactions with their ligands, are both important to processes required for the formation of new blood vessels.     

Microparticle adhesive dynamics and rolling mediated by selectin-specific antibodies under flow

In vitro studies were performed to characterize the relative performance of candidate receptors to target microparticles to inflammatory markers on vascular endothelium. To model the interactions of drug-bearing microparticles or imaging contrast agents with the vasculature, 6 micron polystyrene particles bearing antibodies, peptides, or carbohydrates were perfused over immobilized E- or P-selectin in a flow chamber. Microparticles conjugated with HuEP5C7.g2 (HuEP), a monoclonal antibody (mAb) specific to E- and P-selectin, supported leukocyte-like rolling and transient adhesion at venular shear rates. In contrast, microparticles conjugated with a higher affinity mAb specific for P-selectin (G1) were unable to form bonds at venular flow rates. When both HuEP and G1 were conjugated to the microparticle, HuEP supported binding to P-selectin in flow which allowed G1 to form bonds leading to stable adhesion. While the microparticle attachment and rolling performance was not as stable as that mediated by the natural ligands P-selectin Glycoprotein Ligand-1 or sialyl Lewis(x), HuEP performed significantly better than any previously characterized mAb in terms of mediating microparticle binding under flow conditions. HuEP may be a viable alternative to natural ligands to selectins for targeting particles to inflamed endothelium.     

Platelet adhesion receptors and (patho)physiological thrombus formation

In thrombus formation associated with hemostasis or thrombotic disease, blood platelets first undergo a rapid transition from a circulating state to an adherent state, followed by activation and aggregation. Under flow conditions in the bloodstream, this process potentially involves platelet-platelet, platelet-endothelium, platelet-subendothelial matrix, and platelet-leukocyte interactions. Specific adhesion receptors on platelets mediate these interactions, by engaging counter-receptors on other cells, or noncellular ligands in the plasma or matrix. The glycoprotein (GP) Ib-IX-V complex on platelets initiates adhesion at high shear stress by binding the adhesive ligand, von Willebrand Factor (vWF). GP Ib-IX-V may also mediate platelet-endothelium or platelet-leukocyte adhesion, by recognition of P-selectin or Mac-1, respectively. Other membrane glycoproteins, such as the collagen receptor GP VI, may trigger platelet activation at low shear rates. Engagement of GP Ib-IX-V or GP VI leads ultimately to platelet aggregation mediated by the integrin, alphaIIbbeta3 (GP IIb-IIIa). This review will focus on recent advances in understanding structure-activity relationships of GP Ib-IX-V, its role in initiating thrombus formation, and its emerging relationships with other vascular cell adhesion receptors.     

Morphology of cell-substratum adhesion

Many cell types modulate growth, differentiation, and motility through changes in cell substrate adhesion, including regulation of focal contact formation. Clustering of cell surface adhesion receptors is an essential early step in the development of focal contacts, and thus may influence cell physiology. In this paper, we present a theoretical framework to examine how cell surface chemistry affects receptor clustering. Our one-dimensional tape-peeling model couples the equations of mechanical equilibrium for a cell membrane with kinetic receptor-ligand binding relations. We considered two distinct model scenarios: Adhesion mediated by multiple receptor-ligand interactions of different length and specific binding of a single receptor type occurs in the presence of van der Waals attraction and nonspecific repulsion. In each case, nonuniform (wave-like) membrane morphologies are observed in certain parameter ranges that support the clustering of adhesion receptors. The formation of these morphologies is described in terms of a balance of membrane stresses; when cell-surface potential as a function of separation distance is symmetric between two potential energy minima, nonuniform morphologies are obtained. Increases in the chemical binding energy between receptor and ligand (e.g., increases in ligand density) or decreases in the membrane rigidity result in smaller wavelengths for nonuniform interfaces. Additionally, we show wave-like geometries appear only when the mechanical compliance of receptor-ligand bonds is within an intermediate range, and examine how the mobility of “repellers”—glycocalyx molecules that exert a nonspecific repulsive force—influences membrane morphology. We find fully mobile repellers always redistribute to prevent nonuniform morphologies.     

P-Selectin Glycoprotein Ligand-1 Forms Dimeric Interactions with E-Selectin but Monomeric Interactions with L-Selectin on Cell Surfaces

Interactions of selectins with cell surface glycoconjugates mediate the first step of the adhesion and signaling cascade that recruits circulating leukocytes to sites of infection or injury. P-selectin dimerizes on the surface of endothelial cells and forms dimeric bonds with P-selectin glycoprotein ligand-1 (PSGL-1), a homodimeric sialomucin on leukocytes. It is not known whether leukocyte L-selectin or endothelial cell E-selectin are monomeric or oligomeric. Here we used the micropipette technique to analyze two-dimensional binding of monomeric or dimeric L- and E-selectin with monomeric or dimeric PSGL-1. Adhesion frequency analysis demonstrated that E-selectin on human aortic endothelial cells supported dimeric interactions with dimeric PSGL-1 and monomeric interactions with monomeric PSGL-1. In contrast, L-selectin on human neutrophils supported monomeric interactions with dimeric or monomeric PSGL-1. Our work provides a new method to analyze oligomeric cross-junctional molecular binding at the interface of two interacting cells.     

Advancing Aptamers as Molecular Probes for Cancer Theranostic Applications—The Role of Molecular Dynamics Simulation

Theranostics cover emerging technologies for cell biomarking for disease diagnosis and targeted introduction of drug ingredients to specific malignant sites. Theranostics development has become a significant biomedical research endeavor for effective diagnosis and treatment of diseases, especially cancer. An efficient biomarking and targeted delivery strategy for theranostic applications requires effective molecular coupling of binding ligands with high affinities to specific receptors on the cancer cell surface. Bioaffinity offers a unique mechanism to bind specific target and receptor molecules from a range of non‐targets. The binding efficacy depends on the specificity of the affinity ligand toward the target molecule even at low concentrations. Aptamers are fragments of genetic materials, peptides, or oligonucleotides which possess enhanced specificity in targeting desired cell surface receptor molecules. Aptamer–target binding results from several inter‐molecular interactions including hydrogen bond formation, aromatic stacking of flat moieties, hydrophobic interaction, electrostatic, and van der Waals interactions. Advancements in Systematic Evolution of Ligands by Exponential Enrichment (SELEX) assay has created the opportunity to artificially generate aptamers that specifically bind to desired cancer and tumor surface receptors with high affinities. This article discusses the potential application of molecular dynamics (MD) simulation to advance aptamer‐mediated receptor targeting in targeted cancer therapy. MD simulation offers real‐time analysis of the molecular drivers of the aptamer‐receptor binding and generate optimal receptor binding conditions for theranostic applications. The article also provides an overview of different cancer types with focus on receptor biomarking and targeted treatment approaches, conventional molecular probes, and aptamers that have been explored for cancer cells targeting.     

Lectin domain peptides from selectins interact with both cell surface ligands and Ca2+ ions.

Selectins are receptors that mediate leukocyte adhesion to platelets or endothelial cells through Ca(2+)-dependent interactions with cell surface oligosaccharides. We found that peptides corresponding to residues 23-30, 54-63, and 70-79 of the N-terminal lectin domain of P-selectin inhibited leukocyte adhesion to P-selectin. Peptides corresponding to the homologous 23-30 and 54-63 regions of E-selectin and L-selectin also prevented cell binding to P-selectin. Immobilized albumin conjugates of the three P-selectin peptides supported adhesion of myeloid cells and certain other cells expressing fucosylated oligosaccharides. Ca2+ was required for optimal cell adhesion to the conjugates containing the 23-30 and 54-63 sequences. Furthermore, Ca2+ interacted with the 23-30 and 54-63 peptides of all three selectins, as detected by changes in intrinsic fluorescence emission intensity. These data suggest that residues contained within the 23-30 and 54-63 regions of the selectins represent contact sites for carbohydrate structures on target cells. Furthermore, binding of Ca2+ to these sequences may directly enhance their ability to interact with cell surface ligands.     

Analysis of competition binding between soluble and membrane-bound ligands for cell surface receptors

Binding of the Fc portion of IgG coated on targets to Fcgamma receptors (e.g., CD16) expressed on leukocytes (i.e., 2D binding) is an initiating step for immune responses such as phagocytosis or antibody-dependent cellular cytotoxicity. In vivo, circulating leukocytes are exposed to plasma IgG. The competition from soluble IgG (i.e., 3D binding) may affect the 2D binding. Many cell surface receptors, CD16 included, have soluble counterparts. While their physiological significance is not clear, receptor-based competitive inhibition therapy, in which soluble receptors, ligands, and their analogs are employed to compete with surface-bound receptors and ligands to prevent unwanted adhesion, is widely used to treat various diseases. To provide a quantitative basis for design of these therapeutic approaches, we developed a mathematical model for 2D and 3D competition binding. The model relates cell-surface adhesion (in the presence and absence of dislodging forces) to the concentration of the soluble competitor, the densities of the surface-bound receptors and ligands, as well as the binding affinities of the 2D and 3D interactions. Binding of CD16-expressing cells to an IgG-coated surface in the presence of a soluble competitor (IgG or anti-CD16 antibody) was quantified by a centrifugation assay. The agreement between experiment and theory supports the validity of the model, which could be useful in predicting the efficacy of the competitor.     

Forces Required to Initiate Membrane Tether Extrusion from Cell Surface Depend on Cell Type But Not on the Surface Molecule

When a cell adhered to another cell or substratum via surface proteins is forced to detach, lipid membrane tethers are often extruded from the cell surface before the protein bond dissociates. For example, during the inflammatory reaction leukocytes roll on the surface of activated endothelial cells. The rolling adhesion is mediated by interactions of selectins with their ligands, e.g., P-selectin glycoprotein ligand (PSGL)-1, which extrudes membrane tethers from the surfaces of both leukocytes and endothelial cells. Membrane tether extrusion has been suggested to regulate leukocyte rolling. Here we examine several factors that may affect forces required to initiate membrane tethers, or initial tether force. It was found that initial tether forces were similar regardless of the presence or absence of the cytoplasmic tail of P-selectin and regardless of whether the tethers were extruded via binding to PSGL-1 or Fcγ receptors. Initial tether forces were found to depend on the cell types tested and were greatly reduced by treatment of latrunculin A, which inhibits actin polymerization. These data provide additional insights to the control of membrane tether extrusion, which should be taken into account when cellular functions such as rolling where tether extrusion plays a regulatory role are compared using different cell types expressing the same molecule.     

Single molecule characterization of P-selectin/ligand binding

P-selectin expressed on activated platelets and vascular endothelium mediates adhesive interactions to polymorphonuclear leukocytes (PMNs) and colon carcinomas critical to the processes of inflammation and blood-borne metastasis, respectively. How the overall adhesiveness (i.e. the avidity) of receptor/ligand interactions is controlled by the affinity of the individual receptors to single ligands is not well understood. Using single molecule force spectroscopy, we probed in situ both the tensile strength and off-rate of single P-selectin molecules binding to single ligands on intact human PMNs and metastatic colon carcinomas and compared them to the overall avidity of these cells for P-selectin substrates. The use of intact cells rather than purified proteins ensures the proper orientation and preserves post-translational modifications of the P-selectin ligands. The P-selectin/PSGL-1 interaction on PMNs was able to withstand forces up to 175 pN and had an unstressed off-rate of 0.20 s(-1). The tensile strength of P-selectin binding to a novel O-linked, sialylated protease-sensitive ligand on LS174T colon carcinomas approached 125 pN, whereas the unstressed off-rate was 2.78 s(-1). Monte Carlo simulations of receptor/ligand bond rupture under constant loading rate for both P-selectin/PSGL-1 and P-selectin/LS174T ligand binding give distributions and mean rupture forces that are in accord with experimental data. The pronounced differences in the affinity for P-selectin/ligand binding provide a mechanistic basis for the differential abilities of PMNs and carcinomas to roll on P-selectin substrates under blood flow conditions and underline the requirement for single molecule affinity measurements.     

Theory of equilibrium binding of a bivalent ligand to cell surface antibody: The effect of antibody heterogeneity on cross-linking

We investigate the equilibrium binding of symmetric bivalent ligands to a heterogeneous population of symmetric bivalent cell surface receptors. The receptors are heterogeneous in their binding affinities (equilibrium binding constants) for the ligand. For any distribution of receptor binding affinities we show how to calculate the total concentration of receptors that are cross-linked by the ligand, i.e., the concentration of cell surface aggregates composed of two or more receptors, as well as the concentration of any given aggregate. We show that certain qualitative properties of cross-linking which hold for homogeneous antibody populations fail to hold in the heterogeneous case. We use our results to interpret certain in vitro experiments in which synthetic bivalent haptens are used to trigger histamine release from basophils which have on their surface antibody specific for the hapten.This work was performed under the auspices of the Department of Energy and supported by Grant AI 16465 from the National Institute of Allergy and Infectious Diseases.     

The membrane anchor influences ligand binding two-dimensional kinetic rates and three-dimensional affinity of FcgammaRIII (CD16)

Kinetic rates and affinity are essential determinants for biological processes that involve receptor-ligand binding. By using a micropipette method, we measured the kinetics of human Fcgamma receptor III (CD16) interacting with IgG when the two molecules were bound to apposing cellular membranes. CD16 is one of only four eukaryotic receptors known to exist natively in both the transmembrane (TM, CD16a) and glycosylphosphatidylinositol (GPI, CD16b) isoforms. The biological significance of this anchor isoform coexistence is not clear. Here we showed that the anchor influenced kinetic rates; compared with CD16a-TM, CD16a-GPI bound faster and with higher affinities to human and rabbit IgGs but slower and with lower affinity to murine IgG2a. The same differential affinity patterns were observed using soluble IgG ligands. A monoclonal antibody bound CD16a-GPI with higher affinity than CD16a-TM, whereas another monoclonal antibody reacted strongly with CD16a-TM but weakly with CD16a-GPI. No major differential glycosylation between the two CD16a isoforms was detected by SDS-polyacrylamide gel electrophoresis analysis. We suggest a conformational difference as the mechanism underlying the observed anchor effect, as it cannot be explained by the differing diffusivity, flexibility, orientation, height, distribution, or clustering of the two molecules on the cell membrane. These data demonstrate that a covalent modification of an Ig superfamily receptor at the carboxyl terminus of the ectodomain can have an impact on ligand binding kinetics.     

EphB/ephrinB Signaling in Cell Adhesion and Migration

Eph receptors and their ligands, ephrins, represent the largest group of the receptor tyrosine kinase (RTK) family, and they mediate numerous developmental processes in a variety of organisms. Ephrins are membrane-bound proteins that are mainly divided into two classes: A class ephrins, which are linked to the membrane by a glycosylphosphatidylinositol (GPI) linkage, and B class ephrins, which are transmembrane ligands. Based on their domain structures and affinities for ligand binding, the Eph receptors are also divided into two groups. Trans-dimerization of Eph receptors with their membrane-tethered ligands regulates cell-cell interactions and initiates bidirectional signaling pathways. These pathways are intimately involved in regulating cytoskeleton dynamics, cell migration, and alterations in cellular dynamics and shapes. The EphBs and ephrinBs are specifically localized and modified to promote higher-order clustering and initiate of bidirectional signaling. In this review, we present an in-depth overview of the structure, mechanisms, cell signaling, and functions of EphB/ephrinB in cell adhesion and migration.     

Clustering of ligand on the surface of a particle enhances adhesion to receptor-bearing cells

Human leukocytes express a receptor that mediates the binding of cells and particles coated with C3bi, a fragment of the third component of complement. Previous data indicate that the capacity of this receptor to mediate binding is regulated by changes in its aggregation state. Randomly distributed receptors bind ligand very inefficiently, but stimulation of polymorphonuclear leukocytes with phorbol esters causes a ligand-independent clustering of the receptors in the membrane, and the clustered receptors avidly bind C3bi-coated cells (1). We examined whether the aggregation state of surface-bound ligands also affects the efficiency of binding between receptors and ligands. We found that erythrocytes bearing C3bi in clusters were bound by both macrophages and polymorphonuclear leukocytes far more avidly than erythrocytes bearing the same number of ligands in random array. We made similar observations with erythrocytes coated with C3b, a ligand that is recognized by a separate receptor. Our observations show that the ability of a receptor-bearing cell to bind particles coated with the corresponding ligands is dramatically affected by the distribution of ligand on the surface of the particle. Cell-cell interactions may thus be regulated by alterations in the two-dimensional distribution of receptors and ligands on opposing cell surfaces.     

Sialyl Lewis(x)-mediated, PSGL-1-independent rolling adhesion on P-selectin

Selectin-mediated cell adhesion is an essential component of the inflammatory response. In an attempt to unambiguously identify molecular features of ligands that are necessary to support rolling adhesion on P-selectin, we have used a reconstituted ("cell-free") system in which ligand-coated beads are perfused over soluble P-selectin surfaces. We find that beads coated with the saccharides sialyl Lewis(x) (sLe(x)), sialyl Lewis(a) (sLe(a)), and sulfated Lewis(x) (HSO(3)Le(x) support rolling adhesion on P-selectin surfaces. Although it has been suggested that glycosylation and sulfation of P-selectin glycoprotein ligand-1 (PSGL-1) is required for high-affinity binding and rolling on P-selectin, our findings indicate that sulfation of N-terminal tyrosine residues is not required for binding or rolling. However, beads coated with a tyrosine-sulfated, sLe(x)-modified, PSGL-1-Fc chimera support slower rolling on P-selectin than beads coated with sLe(x) alone, suggesting that sulfation improves rolling adhesion by modulating binding to P-selectin. In addition, we find it is not necessary that P-selectin carbohydrate ligands be multivalent for robust rolling to occur. Our results demonstrate that beads coated with monovalent sLe(x), exhibiting a more sparse distribution of carbohydrate than a similar amount of the multivalent form, are sufficient to yield rolling adhesion. The relative abilities of various ligands to support rolling on P-selectin are quantitatively examined among themselves and in comparison to human neutrophils. Using stop-time distributions, rolling dynamics at video frame rate resolution, and the average and variance of the rolling velocity, we find that P-selectin ligands display the following quantitative trend, in order of decreasing ability to support rolling adhesion on P-selectin: PSGL-1-Fc > sLe(a) approximately sLe(x) > HSO(3)Le(x).     

P-selectin glycoprotein ligand-1 decameric repeats regulate selectin-dependent rolling under flow conditions

P-selectin glycoprotein ligand-1 (PSGL-1) interacts with selectins to support leukocyte rolling along vascular wall. L- and P-selectin bind to N-terminal tyrosine sulfate residues and to core-2 O-glycans attached to Thr-57, whereas tyrosine sulfation is not required for E-selectin binding. PSGL-1 extracellular domain contains decameric repeats, which extend L- and P-selectin binding sites far above the plasma membrane. We hypothesized that decamers may play a role in regulating PSGL-1 interactions with selectins. Chinese hamster ovary cells expressing wild-type PSGL-1 or PSGL-1 molecules exhibiting deletion or substitution of decamers with the tandem repeats of platelet glycoprotein Ibalpha were compared in their ability to roll on selectins and to bind soluble L- or P-selectin. Deletion of decamers abrogated soluble L-selectin binding and cell rolling on L-selectin, whereas their substitution partially reversed these diminutions. P-selectin-dependent interactions with PSGL-1 were less affected by decamer deletion. Videomicroscopy analysis showed that decamers are required to stabilize L-selectin-dependent rolling. Importantly, adhesion assays performed on recombinant decamers demonstrated that they directly bind to E-selectin and promote slow rolling. Our results indicate that the role of decamers is to extend PSGL-1 N terminus far above the cell surface to support and stabilize leukocyte rolling on L- or P-selectin. In addition, they function as a cell adhesion receptor, which supports approximately 80% of E-selectin-dependent rolling.     

Expression of a P-selectin Ligand in Zona Pellucida of Porcine Oocytes and P-selectin on Acrosomal Membrane of Porcine Sperm Cells. Potential Implications for Their Involvement in Sperm–Egg Interactions

The selectin family of cell adhesion molecules mediates initial leukocyte adhesion to vascular endothelial cells at sites of inflammation. O-glycan structural similarities between oligosaccharides from human leukocyte P-selectin glycoprotein ligand-1 (PSGL-1) and from zona pellucida glycoproteins of porcine oocytes indicate the possible existence of a P-selectin ligand in the zona pellucida. Here, using biochemical as well as morphological approaches, we demonstrate that a P-selectin ligand is expressed in the porcine zona pellucida. In addition, a search for a specific receptor for this ligand leads to the identification of P-selectin on the acrosomal membrane of porcine sperm cells. In vitro binding of porcine acrosome-reacted sperm cells to oocytes was found to be Ca²⁺ dependent and inhibitable with either P-selectin, P-selectin receptor–globulin, or leukocyte adhesion blocking antibodies against P-selectin and PSGL-1. Moreover, porcine sperm cells were found to be capable of binding to human promyeloid cell line HL-60. Taken together, our findings implicate a potential role for the oocyte P-selectin ligand and the sperm P-selectin in porcine sperm– egg interactions.     

Interplay between rolling and firm adhesion elucidated with a cell-free system engineered with two distinct receptor-ligand pairs

The firm arrest of leukocytes to the endothelium during inflammation is known to be mediated by endothelial intercellular adhesion molecules (ICAMs) binding to activated integrins displayed on leukocyte surface. Selectin-ligand interactions, which mediate rolling, are believed to be important for facilitating firm adhesion, either by activating integrins or by facilitating the transition to firm adhesion by making it easier for integrins to bind. Although leukocytes employ two distinct adhesion molecules that mediate different states of adhesion, the fundamental biophysical mechanisms by which two pairs of adhesion molecules facilitate cell adhesion is not well understood. In this work, we attempt to understand the interaction between two molecular systems using a cell-free system in which polystyrene microspheres functionalized with the selectin ligand, sialyl Lewis(X) (sLe(X)), and an antibody against ICAM-1, aICAM-1, are perfused over P-selectin/ICAM-1 coated surfaces in a parallel plate flow chamber. Separately, sLe(X)/P-selectin interactions support rolling and aICAM-1/ICAM-1 interactions mediate firm adhesion. Our results show that sLe(X)/aICAM-1 microspheres will firmly adhere to P-selectin/ICAM-1 coated surfaces, and that the extent of firm adhesion of microspheres is dependent on wall shear stress within the flow chamber, sLe(X)/aICAM-1 microsphere site density, and P-selectin/ICAM-1 surface density ratio. We show that P-selectin's interaction with sLe(X) mechanistically facilitates firm adhesion mediated by antibody binding to ICAM-1: the extent of firm adhesion for the same concentration of aICAM-1/ICAM-1 interaction is greater when sLe(X)/P-selectin interactions are present. aICAM-1/ICAM-1 interactions also stabilize rolling by increasing pause times and decreasing average rolling velocities. Although aICAM-1 is a surrogate for beta(2)-integrin, the kinetics of association between aICAM-1 and ICAM-1 is within a factor of 1.5 of activated integrin binding ICAM-1, suggesting the findings from this model system may be insightful to the mechanism of leukocyte firm adhesion. In particular, these experimental results show how two molecule systems can interact to produce an effect not achievable by either system alone, a fundamental mechanism that may pervade leukocyte adhesion biology.