Scale-up from shake flasks to bioreactor, based on power input and Streptomyces lividans morphology, for the production of recombinant APA (45/47 kDa protein) from Mycobacterium tuberculosis

Culture conditions in shake flasks affect filamentous Streptomyces lividans morphology, as well the productivity and O-mannosylation of recombinant Ala-Pro-rich O-glycoprotein (known as the 45/47 kDa or APA antigen) from Mycobacterium tuberculosis. In order to scale up from previous reported shake flasks to bioreactor, data from the literature on the effect of agitation on morphology of Streptomyces strains were used to obtain gassed volumetric power input values that can be used to obtain a morphology of S. lividans in bioreactor similar to the morphology previously reported in coiled/baffled shake flasks by our group. Morphology of S. lividans was successfully scaled-up, obtaining similar mycelial sizes in both scales with diameters of 0.21 ± 0.09 mm in baffled and coiled shake flasks, and 0.15 ± 0.01 mm in the bioreactor. Moreover, the specific growth rate was successfully scaled up (0.09 ± 0.02 and 0.12 ± 0.01 h^?1, for bioreactors and flasks, respectively), and the recombinant protein productivity measured by densitometry, as well. More interestingly, the quality of the recombinant glycoprotein measured as the amount of mannoses attached to the C-terminal of APA was also scaled- up; with up to five mannose residues in cultures carried out in shake flasks; and six in the bioreactor. However, final biomass concentration was not similar, indicating that although the process can be scaled-up using the power input, others factors like oxygen transfer rate, tip speed or energy dissipation/circulation function can be an influence on bacterial metabolism.     

Application of multivariate analysis and mass transfer principles for refinement of a 3‐L bioreactor scale‐down model—when shake flasks mimic 15,000‐L bioreactors better

Characterization of manufacturing processes is key to understanding the effects of process parameters on process performance and product quality. These studies are generally conducted using small‐scale model systems. Because of the importance of the results derived from these studies, the small‐scale model should be predictive of large scale. Typically, small‐scale bioreactors, which are considered superior to shake flasks in simulating large‐scale bioreactors, are used as the scale‐down models for characterizing mammalian cell culture processes. In this article, we describe a case study where a cell culture unit operation in bioreactors using one‐sided pH control and their satellites (small‐scale runs conducted using the same post‐inoculation cultures and nutrient feeds) in 3‐L bioreactors and shake flasks indicated that shake flasks mimicked the large‐scale performance better than 3‐L bioreactors. We detail here how multivariate analysis was used to make the pertinent assessment and to generate the hypothesis for refining the existing 3‐L scale‐down model. Relevant statistical techniques such as principal component analysis, partial least square, orthogonal partial least square, and discriminant analysis were used to identify the outliers and to determine the discriminatory variables responsible for performance differences at different scales. The resulting analysis, in combination with mass transfer principles, led to the hypothesis that observed similarities between 15,000‐L and shake flask runs, and differences between 15,000‐L and 3‐L runs, were due to pCO₂ and pH values. This hypothesis was confirmed by changing the aeration strategy at 3‐L scale. By reducing the initial sparge rate in 3‐L bioreactor, process performance and product quality data moved closer to that of large scale. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 31:1370–1380, 2015     

Modeling of growth and laccase production by Pycnoporus sanguineus

Production of extracellular laccase by the white-rot fungus Pycnoporus sanguineus was examined in batch submerged cultures in shake flasks, baffled shake flasks and a stirred tank bioreactor. The biomass growth in the various culture systems closely followed a logistic growth model. The production of laccase followed a Luedeking-Piret model. A modified Luedeking-Piret model incorporating logistic growth effectively described the consumption of glucose. Biomass productivity, enzyme productivity and substrate consumption were enhanced in baffled shake flasks relative to the cases for the conventional shake flasks. This was associated with improved oxygen transfer in the presence of the baffles. The best results were obtained in the stirred tank bioreactor. At 28 °C, pH 4.5, an agitation speed of 600 rpm and a dissolved oxygen concentration of ~25 % of air saturation, the laccase productivity in the bioreactor exceeded 19 U L^?1 days^?1, or 1.5-fold better than the best case for the baffled shake flask. The final concentration of the enzyme was about 325 U L^?1.     

Definition of culture conditions for Arxula adeninivorans,a rational basis for studying heterologous gene expression in this dimorphic yeast

The yeast Arxula adeninivorans is considered to be a promising producer of recombinant proteins. However, growth characteristics are poorly investigated and no industrial process has been established yet. Though of vital interest for strain screening and production processes, rationally defined culture conditions remain to be developed. A cultivation system was evolved based on targeted sampling and mathematical analysis of rationally designed small-scale cultivations in shake flasks. The oxygen and carbon dioxide transfer rates were analyzed as conclusive online parameters. Oxygen limitation extended cultivation and led to ethanol formation in cultures supplied with glucose. Cultures were inhibited at pH-values below 2.8. The phosphorus demand was determined as 1.55 g phosphorus per 100 g cell dry weight. Synthetic SYN6 medium with 20 g glucose l^?1 was optimized for cultivation in shake flasks by buffering at pH 6.4 with 140 mmol MES l^?1. Optimized SYN6 medium and operating conditions provided non-limited cultivations without by-product formation. A maximal specific growth rate of 0.32 h^?1 and short fermentations of 15 h were achieved. A pH optimum curve was derived from the oxygen transfer rates of differently buffered cultures, showing maximal growth between pH 2.8 and 6.5. Furthermore, it was shown that the applied medium and cultivation conditions were also suitable for non-limiting growth and product formation of a genetically modified A. adeninivorans strain expressing a heterologous phytase.     

A shaken disposable bioreactor system for controlled insect cell cultivations at milliliter‐scale

While wave‐mixed and stirred bag bioreactors are common devices for rapid, safe insect cell culture‐based production at liter‐scale, orbitally shaken disposable flasks are mainly used for screening studies at milliliter‐scale. In contrast to the two aforementioned bag bioreactor types, which can be operated with standard or disposable sensors, shaker flasks have not been instrumented until recently. The combination of 250 mL disposable shake flasks with PreSens's Shake Flask Reader enables both pH and dissolved oxygen to be measured, as well as allowing characterization of oxygen mass transfer. Volumetric oxygen transfer coefficients (k_La‐values) for PreSens 250 mL disposable shake flasks, which were determined for the first time in insect cell culture medium at varying culture volumes and shaker frequencies, ranged between 4.4 and 37.9/h. Moreover, it was demonstrated that online monitoring of dissolved oxygen in shake flasks is relevant for limitation‐free growth of insect cells up to high cell densities in batch mode (1.6×10⁷ cells/mL) and for the efficient expression of an intracellular model protein.     

Optimization of cultivation conditions in spin tubes for Chinese hamster ovary cells producing erythropoietin and the comparison of glycosylation patterns in different cultivation vessels

This article describes the optimization of cultivation factor settings, that is the shaking rate and working volume in 50 mL spin tubes for a Chinese hamster ovary cell line expressing recombinant human α‐erythropoietin, using a response D‐optimal surface method. The main objectives of the research were, firstly, to determine a setting in which the product titer and product quality attributes in spin tubes are equivalent to those in 250 mL shake flasks in a seven day batch and, secondly, to find a setting in which the product titer is maximal. The model for product titer prediction as a function of shaking rate and working volume in the defined design space was successfully applied to the optimization of cultivation conditions in spin tubes for the tested cell line. Subsequently, validation experiments were carried out simultaneously in spin tubes, shake flasks and bench scale bioreactors to compare cell culture performance parameters such as growth, productivity and product quality attributes in the form of isoform profiles and glycan antennarity structures. The results of the experiments showed that similar cell culture performance and product quality could be achieved in spin tubes when compared to shake flasks. Additionally, bioreactor titers could be reproduced in spin tubes at high shaking rates and low working volumes, but with differing product quality. Cultivation at lower shaking rates in spin tubes and shake flasks produced a glycoprotein with a product quality slightly comparable to that from bioreactors, but with titers being only two thirds. © 2010 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

Upstream and Downstream Processing of Lovastatin by Aspergillus terreus

The present study describes the enhanced production and purification of lovastatin by Aspergillus terreus in submerged batch fermentation. The enhancement of lovastatin production from A. terreus was attempted by random mutagenesis using ultraviolet radiations and nitrous acid. UV mutants exhibited increased efficiency for lovastatin production as compared with nitrous acid mutants. Among all the mutants developed, A. terreus UV-4 was found to be the hyper producer of lovastatin. This mutant gave 3.5-fold higher lovastatin production than the wild culture of A. terreus NRRL 265. Various cultural conditions were also optimized for hyper-producing mutant strain. 5 % glucose as carbon source, 1.5 % corn steep liquor as nitrogen source, initial pH value of 6, 120 h of incubation period, and 28 °C of incubation temperature were found as best parameters for higher lovastatin production in shake flasks. Production of lovastatin by wild and mutant strains of A. terreus was also scaled up to laboratory scale fermentor. The fermentation process was conducted at 28 °C, 200 rpm agitation, and 1vvm air flow rate without pH control. After the optimization of cultural conditions in 250 ml Erlenmeyer flasks and scaling up to laboratory scale fermentor, the mutant A. terreus UV-4 gave eightfold higher lovastatin production (3249.95 μg/ml) than its production by wild strain in shake flasks. Purification of lovastatin was carried out by solvent extraction method which yielded 977.1 mg/l of lovastatin with 98.99 % chromatographic purity and 26.76 % recovery. The crystal structure of lovastatin was determined using X-ray diffraction analysis which is first ever reported.     

The effect of hydrodynamic stress on the growth of Xanthomonas campestris cultures in a stirred and sparged tank bioreactor

The specific growth and the xanthan production rates by the bacterium Xanthomonas campestris under different shear levels in shake flasks and in a stirred and sparged tank bioreactor have been studied. The shake flask has been used as a reference for studying the shear effects. An effectiveness factor expressed by the ratio of the observed growth rate and the growth rate without oxygen limitation or cell damage was calculated in both modes of cultures. It was observed that the effectiveness factor was strongly dependent on the operational conditions. A strong oxygen transfer limitation at low stirring rates, indicated by a 54 % decrease in the effectiveness factor was observed. In contrast, at higher stirrer speed, cell damage was caused by hydrodynamic stress in the turbulent bulk of the broth, yielding again a decrease in the effectiveness factor values for stirrer speeds higher than 500 rpm. Cell morphological changes were also observed depending on the agitation conditions, differences in morphology being evident at high shear stress.     

Genomic analysis reveals Lactobacillus sanfranciscensis as stable element in traditional sourdoughs

Background

The Ala-Pro-rich O-glycoprotein known as the 45/47 kDa or APA antigen from Mycobacterium tuberculosis is an immunodominant adhesin restricted to mycobacterium genus and has been proposed as an alternative candidate to generate a new vaccine against tuberculosis or for diagnosis kits. In this work, the recombinant O-glycoprotein APA was produced by the non-pathogenic filamentous bacteria Streptomyces lividans, evaluating three different culture conditions. This strain is known for its ability to produce heterologous proteins in a shorter time compared to M. tuberculosis.

Results

Three different shake flask geometries were used to provide different shear and oxygenation conditions; and the impact of those conditions on the morphology of S. lividans and the production of rAPA was characterized and evaluated. Small unbranched free filaments and mycelial clumps were found in baffled and coiled shake flasks, but one order of magnitude larger pellets were found in conventional shake flasks. The production of rAPA is around 3 times higher in small mycelia than in larger pellets, most probably due to difficulties in mass transfer inside pellets. Moreover, there are four putative sites of O-mannosylation in native APA, one of which is located at the carboxy-terminal region. The carbohydrate composition of this site was determined for rAPA by mass spectrometry analysis, and was found to contain different glycoforms depending on culture conditions. Up to two mannoses residues were found in cultures carried out in conventional shake flasks, and up to five mannoses residues were determined in coiled and baffled shake flasks.

Conclusions

The shear and/or oxygenation parameters determine the bacterial morphology, the productivity, and the O-mannosylation of rAPA in S. lividans. As demonstrated here, culture conditions have to be carefully controlled in order to obtain recombinant O-glycosylated proteins with similar "quality" in bacteria, particularly, if the protein activity depends on the glycosylation pattern. Furthermore, it will be an interesting exercise to determine the effect of shear and oxygen in shake flasks, to obtain evidences that may be useful in scaling-up these processes to bioreactors. Another approach will be using lab-scale bioreactors under well-controlled conditions, and study the impact of those on rAPA productivity and quality.     

Controlled release of nutrients to mammalian cells cultured in shake flasks

Though cell culture-based protein production processes are rarely carried out under batch mode of operation, cell line and initial process development operations are usually carried out in batch mode due to simplicity of operation in widely used scale down platforms like shake flasks. Nutrient feeding, if performed, is achieved by bolus addition of concentrated feed solution at different intervals, which leads to large transient increases in nutrient concentrations. One negative consequence is increased waste metabolite production. We have developed a hydrogel-based nutrient delivery system for continuous feeding of nutrients in scale down models like shake flasks without the need for manual feed additions or any additional infrastructure. Continuous delivery also enables maintaining nutrient concentrations at low levels, if desired. The authors demonstrate the use of these systems for continuous feeding of glucose and protein hydrolysate to a suspension Chinese Hamster Ovary (CHO) culture in a shake flask. Glucose feeding achieved using the glucose-loaded hydrogel resulted in a 23% higher integral viable cell density and an 89% lower lactate concentration at the end of the culture when compared with a bolus-feed of glucose.     

Development of a stirred tank reactor system for the production of lignin peroxidases (ligninases) byPhanerochaete chrysosporium BKM-F-1767

Summary Lignin peroxidases produced byPhanerochaete chrysosporium have several important potential industrial applications based on their ability to degrade lignin and lignin-like compounds. A stirred tank reactor system for the production of lignin peroxidases is described here. Included in this study is an examination of the mechanics of pellet biocatalyst formation and the optimization of an acetate buffered medium. Higher levels of lignin peroxidase were obtained with acetate buffer compared to the other buffer systems tested. Concentrations of 0.05% (w/v) Tween 80 and 0.4 mM veratryl alcohol gave optimal lignin peroxidase activity in acetate buffered medium. In shake flask cultures, mycelial fragments in the inoculum aggregated into pellets during the first eight hours of incubation and thereafter increased in size through the eighth day. The agitation rate in shake flask cultures affected pellet size, the number of pellets formed, and lignin peroxidase activity. Transfer of fungal pellets from shake flask culture to a continuously oxygenated baffled stirred tank reactor (STR) resulted in production of high lignin peroxidase titres comparable to those of shake flask cultures when the agitation rate, oxygen dispersion and foaming were closely controlled.     

From field sampling to pneumatic bioreactor mycelia production of the ectomycorrhizal mushroom Laccaria trichodermophora

In order to increase survival rates of greenhouse seedlings destined for restoration and conservation programs, successful mycorrhization of the seedlings is necessary. To reforest forest ecosystems, host trees must be inoculated with ectomycorrhizal fungi and, in order to guarantee a sufficient supply of ectomycorrhizal inoculum, it is necessary to develop technologies for the mass production of ectomycorrhizal fungi mycelia. We selected the ectomycorrhizal fungus Laccaria trichodermophora, due to its ecological traits and feasible mycelia production in asymbiotic conditions. Here, we report the field sampling of genetic resources, as well as the highly productive nutritional media and cultivation parameters in solid cultures. Furthermore, in order to achieve high mycelial production, we used strain screening and evaluated pH, carbon source concentration, and culture conditions of submerged cultures in normal and baffled shake flasks. The higher productivity culture conditions in shake flasks were selected for evaluation in a pneumatic bioreactor, using modified BAF media with a 10 g/L glucose, pH 5.5, 25 °C, and a volumetric oxygen transfer coefficient (K_La) of 36 h⁻¹. Under those conditions less biomass (12–37 %) was produced in the pneumatic bioreactor compared with the baffled shake flasks. This approach shows that L. trichodermophora can generate a large biomass concentration and constitute the biotechnological foundation of its mycelia mass production.     

In situ pH maintenance for mammalian cell cultures in shake flasks and tissue culture flasks

pH in animal cell cultures decreases due to production of metabolites like lactate. pH control via measurement and base addition is not easily possible in small‐scale culture formats like tissue‐culture flasks and shake flasks. A hydrogel‐based system is reported for in situ pH maintenance without pH measurement in such formats, and is demonstrated to maintain pH between 6.8 and 7.2 for a suspension CHO cell line in CD CHO medium and between 7.3 and 7.5 for adherent A549 cells in DMEM:F12 containing 10% FBS. This system for pH maintenance, along with our previous report of hydrogels for controlled nutrient delivery in shake flasks can allow shake flasks to better mimic bioreactor‐based fed batch operation for initial screening during cell line and process development for recombinant protein production in mammalian cells. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 2012     

Effect of Agitation on Ligninase Activity and Ligninase Production by Phanerochaete chrysosporium

The white rot fungus Phanerochaete chrysosporium produces extracellular ligninases as part of its idiophasic ligninolytic system. Agitation has been widely reported to suppress both ligninase production and lignin degradation. Results show that mechanical inactivation of ligninase is possibly the reason why ligninase accumulation is low or absent in agitated shake-flask cultures. Agitation seems to affect the catalytic activity of ligninase and has no apparent effect on either the rate of ligninase production or the physiology of P. chrysosporium. The detergents Tween 20, Tween 40, Tween 60, Tween 80, and 3-[(3-cholamidopropyl)dimethylammonio]-1-propanesulfonate (CHAPS) are able to protect both purified ligninase and extant ligninase in culture fluids (free of biomass) against mechanical inactivation due to agitation. Addition of Tween 80 at the end of primary growth to agitated shake flasks containing either pelleted or immobilized mycelial cultures results in production and maintenance of high levels of ligninase activity over several days under conditions of high agitation. Possible mechanisms by which the detergents could protect ligninase are discussed.     

Process performance of parallel bioreactors for batch cultivation of Streptomyces tendae

Batch cultivations of the nikkomycin Z producer Streptomyces tendae were performed in three different parallel bioreactor systems (milliliter-scale stirred-tank reactors, shake flasks and shaken microtiter plate) in comparison to a standard liter-scale stirred-tank reactor as reference. Similar dry cell weight concentrations were measured as function of process time in stirred-tank reactors and shake flasks, whereas only poor growth was observed in the shaken microtiter plate. In contrast, the nikkomycin Z production differed significantly between the stirred and shaken bioreactors. The measured product concentrations and product formation kinetics were almost the same in the stirred-tank bioreactors of different scale. Much less nikkomycin Z was formed in the shake flasks and MTP cultivations, most probably due to oxygen limitations. To investigate the non-Newtonian shear-thinning behavior of the culture broth in small-scale bioreactors, a new and simple method was applied to estimate the rheological behavior. The apparent viscosities were found to be very similar in the stirred-tank bioreactors, whereas the apparent viscosity was up to two times increased in the shake flask cultivations due to a lower average shear rate of this reactor system. These data illustrate that different engineering characteristics of parallel bioreactors applied for process development can have major implications for scale-up of bioprocesses with non-Newtonian viscous culture broths.     

Production of carotenoids and lipids by <Emphasis Type="Italic">Rhodococcus opacus</Emphasis> PD630 in batch and fed-batch culture

Production of carotenoids by Rhodococcus opacus PD630 is reported. A modified mineral salt medium formulated with glycerol as an inexpensive carbon source was used for the fermentation. Ammonium acetate was the nitrogen source. A dry cell mass concentration of nearly 5.4 g/L could be produced in shake flasks with a carotenoid concentration of 0.54 mg/L. In batch culture in a 5 L bioreactor, without pH control, the maximum dry biomass concentration was ~30 % lower than in shake flasks and the carotenoids concentration was 0.09 mg/L. Both the biomass concentration and the carotenoids concentration could be raised using a fed-batch operation with a feed mixture of ammonium acetate and acetic acid. With this strategy, the final biomass concentration was 8.2 g/L and the carotenoids concentration was 0.20 mg/L in a 10-day fermentation. A control of pH proved to be unnecessary for maximizing the production of carotenoids in this fermentation.     

pH measurement and a rational and practical pH control strategy for high throughput cell culture system

The number of therapeutic proteins produced by cell culture in the pharmaceutical industry continues to increase. During the early stages of manufacturing process development, hundreds of clones and various cell culture conditions are evaluated to develop a robust process to identify and select cell lines with high productivity. It is highly desirable to establish a high throughput system to accelerate process development and reduce cost. Multiwell plates and shake flasks are widely used in the industry as the scale down model for large‐scale bioreactors. However, one of the limitations of these two systems is the inability to measure and control pH in a high throughput manner. As pH is an important process parameter for cell culture, this could limit the applications of these scale down model vessels. An economical, rapid, and robust pH measurement method was developed at Eli Lilly and Company by employing SNARF‐4F 5‐(‐and 6)‐carboxylic acid. The method demonstrated the ability to measure the pH values of cell culture samples in a high throughput manner. Based upon the chemical equilibrium of CO₂, HCO, and the buffer system, i.e., HEPES, we established a mathematical model to regulate pH in multiwell plates and shake flasks. The model calculates the required %CO₂ from the incubator and the amount of sodium bicarbonate to be added to adjust pH to a preset value. The model was validated by experimental data, and pH was accurately regulated by this method. The feasibility of studying the pH effect on cell culture in 96‐well plates and shake flasks was also demonstrated in this study. This work shed light on mini‐bioreactor scale down model construction and paved the way for cell culture process development to improve productivity or product quality using high throughput systems. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

Nitrogen and phosphorus as the factors affecting ginsenoside production in hairy root cultures of <Emphasis Type="Italic">Panax quinquefolium</Emphasis> cultivated in shake flasks and nutrient sprinkle bioreactor

The study assesses the influence of different concentrations of nitrogen and phosphorus sources on ginsenoside biosynthesis in Panax quinquefolium hairy roots cultivated in shake flasks and a nutrient sprinkle bioreactor. The saponin content was determined using HPLC. The maximum yield (12.45 mg g^?1 dw) of the sum of six examined ginsenosides (Rb1, Rb2, Rc, Rd, Re and Rg1) in hairy roots cultivated in shake flasks was achieved in modified Gamborg B-5 medium containing 0.83 mM l^?1 phosphate, 12.4 mM l^?1 nitrate and 0.5 mM l^?1 ammonium. The yield itself was 1.93 times higher than that achieved in standard Gamborg medium. The modified medium also favourably influenced the biosynthesis of studied saponins in bioreactor cultures. The saponin content (35.11 mg g^?1 d.w.) was 2.75-times higher than that achieved in control medium.     

Oxygen transfer and mycelial growth in a tubular loop fermentor

A 22 m long. 20 liter tubular loop fermentor (TLF) has been tested for oxygen transfer characteristics and as a reactor for mycelial growth. Model calculations show that the flow pressure drop has an important influence on the axial oxygen profiles. A design model that accounts for this influence is presented. Using the model, K_L a values are calculated from the results of sulfite oxidation experiments. These are correlated with power consumption and aeration rates. The K_L a dependence on aeration rate was found to be less than found with tank reactors. The growth kinetics of three metabolite-producing mycelial organisms in the TLF are presented: a Streptomyces, a Fusarium, and a Acrophialophora. In order to determine the influence of reactor type on the growth and product formation, these cultures have been grown in tanks and shake flasks. The antibiotic, product spectrum of Streptomyces is compared on the basis of inhibition tests and it is shown that the distribution of products is reactor dependent. The Fusarium culture produced a previously unknown metabolite, whose concentration in the loop fermentor was four times higher than in a shake flask. The Acrophialophora culture grew twice as fast in the loop fermentor, but produced essentially none of the specific product. Power Consumptions of up to 8 kW/m³ in the tubular fermentor did not appear to harm the mycelia.     

Comparative investigation of the use of various commercial microcarriers as a substrate for culturing mammalian cells

Microcarriers provide large adhesion area allowing high cell densities in bioreactor systems. This study focused on the investigation of cell adhesion and cell growth characteristics of both anchorage-dependent CHO-K1 and anchorage-independent Ag8 myeloma cell lines cultivated on four different microcarriers (Biosilon®, Microhex®, Cytodex 3®, Cytoline 2®) by considering the cell kinetics and physiological data. Experiments were performed in both static and agitated cell culture systems by using 24-well tissue culture plates and then 50-ml spinner flasks. In agitated cultures, the highest specific growth rates (0.026 h for CHO-K1 and 0.061 h for Ag8 cell line) were obtained with Cytodex 3® and Cytoline 2® microcarriers for CHO-K1 and Ag8 cell line, respectively. Metabolic characteristics showed some variation among the cultures with the four microcarriers. The most significant being the higher production of lactate with microcarriers with CHO-K1 cells relative to the Ag8 cells. SEM analyses revealed the differences in the morphology of the cells along with microcarriers. On Cytodex 3® and Cytoline 2®, CHO-K1 cells attached to the substratum through long, slender filopodia, whereas the cells showed a flat morphology by covering the substratum on the Biosilon® and Microhex®. Ag8 cells maintained their spherical shapes throughout the culture for all types of microcarriers. In an attempt to scale-up, productions were carried out in 50-ml spinner flasks. Cytodex 3® (for CHO-K1 cells) and Cytoline 2® (for Ag8 cells) were evaluated. The results demonstrate that high yield of biomass could be achieved through the immobilization of the cells in each culture system. And cell cultures on microcarriers, especially on Cytodex 3® and Cytoline 2®, represented a good potential as microcarriers for larger scale cultures of CHO-K1 and Ag8, respectively. Moreover, owing to the fact that the cell lines and culture media are specific, outcomes will be applicable for other clones derived from the same host cell lines.