Effect of salt additives on protein partition in polyethylene glycol–sodium sulfate aqueous two-phase systems

Partitioning of 15 proteins in polyethylene glycol (PEG)–sodium sulfate aqueous two-phase systems (ATPS) formed by PEG of two different molecular weights, PEG-600 and PEG-8000 in the presence of different buffers at pH 7.4 was studied. The effect of two salt additives (NaCl and NaSCN) on the protein partition behavior was examined. The salt effects on protein partitioning were analyzed by using the Collander solvent regression relationship between the proteins partition coefficients in ATPS with and without salt additives. The results obtained show that the concentration of buffer as well as the presence and concentration of salt additives affects the protein partition behavior. Analysis of ATPS in terms of the differences between the relative hydrophobicity and electrostatic properties of the phases does not explain the protein partition behavior. The differences between protein partitioning in PEG-600–salt and PEG-8000–salt ATPS cannot be explained by the protein size or polymer excluded volume effect. It is suggested that the protein–ion and protein–solvent interactions in the phases of ATPS are primarily important for protein partitioning.     

Aqueous two-phase partition of complex protein feedstocks derived from brain tissue homogenates

This study describes the application of aqueous two-phase partition using polyethylene glycol (PEG)-potassium phosphate systems for the direct recovery of proteins, and aggregates thereof, from mammalian brain tissue homogenates. Investigation of established methodologies for the purification of prion proteins (PrP) from bovine brain affected with transmissible spongiform encephalopathy (BSE) has identified an alternative purification regime based on aqueous two-phase partition. This circumvents energy-intensive and rate-limiting unit operations of ultracentrifugation conventionally used for isolation of PrP. Selectivity of various PEG-phosphate systems varied inversely with polymer molecular mass. The maximum protein recovery from bovine brain extracts was obtained with systems containing PEG 300. Manipulation of the aqueous environment, to back-extract protein product from the PEG-rich top phase into the phosphate-rich lower phase, enabled integration of ATPS with conventional hydrophobic interaction chromatography (HIC) which selectively removes obdurate contaminating proteins (i.e. ferritin).     

Protein partitioning in aqueous two-phase systems composed of a pH-responsive copolymer and poly(ethylene glycol)

The effect of pH and salt concentration on the partitioning behavior of bovine serum albumin (BSA) and cytochrome c in an aqueous two-phase polymer system containing a novel pH-responsive copolymer that mimics the structure of proteins and poly(ethylene glycol) (PEG) was investigated. The two-phase system has low viscosity. Depending on pH and salt concentration, the cytochrome c was found to preferentially partition into the pH-responsive copolymer-rich (bottom) phase under all conditions of pH and salt concentrations considered in the study. This was caused by the attraction between the positively charged protein and negatively charged copolymer. BSA partitioning showed a more complex behavior and partitioned either to the PEG phase or copolymer phase depending on the pH and ionic strength. Extremely high partitioning levels (partition coefficient of 0.004) and very high separation ratios of the two proteins (up to 48) were recorded in the new systems. This was attributed to strong electrostatic interactions between the proteins and the charged copolymer.     

The surface exposed amino acid residues of monomeric proteins determine the partitioning in aqueous two-phase systems

It is of great interest and importance how different amino acid residues contribute to and affect the properties of a protein surface. Partitioning in aqueous two-phase systems has the potential to be used as a rapid and simple method for studying the surface properties of proteins. The influence on partitioning of the surface exposed amino acid residues of eight structurally determined monomeric proteins has been studied. The proteins were characterized in terms of surface exposed residues with a computer program, Graphical Representation and Analysis of Surface Properties (GRASP), and partitioned in two EO30PO70-dextran aqueous two-phase systems, only differing in polymer concentrations (system I: 6.8% EO30PO70, 7.1% dextran; system II: 9% EO30PO70, 9% dextran). We show for the first time that the partitioning behaviour of different monomeric proteins can be described by the differences in surface exposed amino acid residues. The contribution to the partition coefficient of the residues was found to be best characterized by peptide partitioning in the aqueous two-phase system. Compared to hydrophobicity scales available in the literature, each amino acid contribution is characterized by the slope given by the graph of log K against peptide chain length, for peptides of different length containing only one kind of residue. It was also shown that each amino acid contribution is relative to the total protein surface and the other residues on the surface. Surface hydrophobicity calculations realized for systems I and II gave respectively correlation coefficients of 0.961 and 0.949 for the linear relation between log K and calculated hydrophobicity values. To study the effect on the partition coefficient of different amino acids, they were grouped into classes according to common characteristics: the presence of an aromatic group, a long aliphatic chain or the presence of charge. Using these groups it was possible to confirm that aromatic residues have the strongest effect on the partition coefficient, giving preference to the upper EO30PO70 phase of the system; on the other hand the presence of charged amino acids on the protein surface enhances the partition of the protein to the lower dextran phase. It is also important to note that the sensitivity of the EO30PO70-dextran system for the surface exposed residues was increased by increasing the polymer concentrations. The partition coefficient of a monomeric protein can thus be predicted from its surface exposed amino acid residues and the system can also be used to characterize protein surfaces of monomeric proteins in general.     

Affinity-specific protein separations using ligand-coupled particles in aqueous two-phase systems: I. Process concept and enzyme binding studies for pyruvate kinase and alcohol dehydrogenase from Saccharomyces cerevisiae

A process using ligand-coupled particles in aqueous polyethylene glycol-dextran two-phase polymer systems was developed to achieve a highly selective, scaleable biochemical separation process. Product protein is bound to the ligand-coupled particles that quantitatively distribute to the polyethylene glycol-rich upper phase. Other proteins and contaminants partition preferentially to the dextran-rich lower phase.The process offers significant advantages over affinity partitioning here the ligand is coupled to the backbone of a polyethylene glycol polymer. These advantages include a much wider diversity of ligands that can be coupled to particles and more effective confinement of the ligand in the process. Affinity partition with ligands coupled to particles is more amenable to scale-up than is affinity chromatography. A variety of commercially available Sepharose-based particles are suitable for this process. Homogenates from Saccharomyces cerevisiae, which is genetically altered to overproduce pyruvate kinase, and Cibacron blue F3G-A-coupled Sepharose particles are used as a model system for the process. Binding studies with/without aqueous two-phase systems show that the formation of a two-phase system after the adsorption equilibrium is reached does not affect the apparent dissociation constant. Binding of protein to ligand-coupled particles is more rapid in single-phase systems than in the polymer two-phase system. Single-phase binding eliminates the mass transfer resistance associated with redistribution of product protein from the dextran-rich bottom phase to the polyethylene glycol-rich top phase.     

Mechanisms of phase behaviour and protein partitioning in detergent/polymer aqueous two-phase systems for purification of integral membrane proteins

Detergent/polymer aqueous two-phase systems are studied as a fast, mild and efficient general separation method for isolation of labile integral membrane proteins. Mechanisms for phase behaviour and protein partitioning of both membrane-bound and hydrophilic proteins have been examined in a large number of detergent/polymer aqueous two-phase systems. Non-ionic detergents such as the Triton series (polyoxyethylene alkyl phenols), alkyl polyoxyethylene ethers (C(m)EO(n)), Tween series (polyoxyethylene sorbitol esters) and alkylglucosides form aqueous two-phase systems in mixtures with hydrophilic polymers, such as PEG or dextran, at low and moderate temperatures. Phase diagrams for these mixtures are shown and phase behaviour is discussed from a thermodynamic model. Membrane proteins, such as bacteriorhodopsin and cholesterol oxidase, were partitioned strongly to the micelle phase, while hydrophilic proteins, BSA and lysozyme, were partitioned to the polymer phase. The partitioning of membrane protein is mainly determined by non-specific hydrophobic interactions between detergent and membrane protein. An increased partitioning of membrane proteins to the micelle phase was found with an increased detergent concentration difference between the phases, lower polymer molecular weight and increased micelle size. Partitioning of hydrophilic proteins is mainly related to excluded volume effects, i.e. increased phase component size made the hydrophilic proteins partition more to the opposite phase. Addition of ionic detergent to the system changed the partitioning of membrane proteins slightly, but had a strong effect on hydrophilic proteins, and can be used for enhanced separation between hydrophilic proteins and membrane protein.     

Optimization of bovine serum albumin sorption and recovery by hydrogels

Aqueous two-phase systems are composed of aqueous solutions of either two water-soluble polymers, usually polyethylene glycol (PEG) and dextran (Dx), or a polymer and a salt, usually PEG and phosphate or sulfate. Partitioning of proteins in such systems provides a powerful method for separating and purifying mixtures of biomolecules by extraction. If one of the phase forming polymers is a crosslinked gel, then the solution-controlled gel sorption may be considered as a modification of aqueous two-phase extraction. Since PEG/dextran systems are widely used in aqueous two-phase extraction and dextran gels (Sephadex) are common chromatographic media, we choose a PEG/dextran gel system as a model system in this study. The partitioning behavior of pure bovine serum albumin (BSA) in PEG/dextran gel systems is investigated to see the effects of variations in PEG and NaCl concentrations on the partition coefficient K. By making use of the Box-Wilson experimental design, K is shown to be maximized at 9.8 (%, w/w) PEG and 0.2 M NaCl concentrations, respectively, as 182.     

Role of polymer–protein interaction on partitioning pattern of bovine pancreatic trypsinogen and alpha-chymotrypsinogen in polyethyleneglycol/sodium tartrate aqueous two-phase systems

The partitioning pattern of bovine trypsinogen (TRPz) and alpha-chymotrypsinogen (ChTRPz) was investigated in a low impact aqueous two-phase system formed by polyethyleneglycol (PEG) and sodium tartrate (NaTart) pH 5.00. ChTRPz exhibited higher partition coefficients than TRPz did in all the assayed systems. The decrease in PEG molecular weight and the increase in tie line length were observed to displace the partitioning equilibrium of both proteins to the top phase, while phase volume ratios in the range 0.5–1.5 showed not to affect protein partitioning behaviour. Systems formed by PEG of molecular weight 600 with composition corresponding to a high tie line length (PEG 12.93%, w/w and NaTart 21.20%, w/w) are able to recover most of both zymogens in the polymer-enriched phase. A crucial role of PEG–protein interaction in the partitioning mechanism was evidenced by isothermal calorimetric titrations. The major content of highly exposed tryptophan rests, present in ChTRPz molecule, could be considered to be determinant of its higher partition coefficient due to a selective charge transfer interaction with PEG molecule. A satisfactory correlation between partition coefficient and protein surface hydrophobicity was observed in systems formed with PEGs of molecular weight above 4000, this finding being relevant in the design of an extraction process employing aqueous two-phase systems.     

Effects of low urea concentrations on protein-water interactions

Solvent properties of aqueous media (dipolarity/polarizability, hydrogen bond donor acidity, and hydrogen bond acceptor basicity) were measured in the coexisting phases of Dextran–PEG aqueous two-phase systems (ATPSs) containing .5 and 2.0 M urea. The differences between the electrostatic and hydrophobic properties of the phases in the ATPSs were quantified by analysis of partitioning of the homologous series of sodium salts of dinitrophenylated amino acids with aliphatic alkyl side chains. Furthermore, partitioning of eleven different proteins in the ATPSs was studied. The analysis of protein partition behavior in a set of ATPSs with protective osmolytes (sorbitol, sucrose, trehalose, and TMAO) at the concentration of .5 M, in osmolyte-free ATPS, and in ATPSs with .5 or 2.0 M urea in terms of the solvent properties of the phases was performed. The results show unambiguously that even at the urea concentration of .5 M, this denaturant affects partitioning of all proteins (except concanavalin A) through direct urea–protein interactions and via its effect on the solvent properties of the media. The direct urea–protein interactions seem to prevail over the urea effects on the solvent properties of water at the concentration of .5 M urea and appear to be completely dominant at 2.0 M urea concentration.     

Use of chemically modified proteins to study the effect of a single protein property on partitioning in aqueous two-phase systems: Effect of surface hydrophobicity

Two different series of hydrophobically modified proteins were partitioned in a number of aqueous two-phase systems (ATPS) to investigate the effect of hydrophobicity as a single property on partitioning. The modified proteins were derived from beta-lactoglobulin and bovine serum albumin (BSA). Measurement of the surface hydrophobicity of the proteins is important; hydrophobic interaction chromatography (HIC) was used for this purpose. The resolution of the systems (R) in terms of protein surface hydrophobicity and the intrinsic hydrophobicity (log P(0)) of the systems was established. The effect of the addition of NaCl to PEG/phosphate and PEG/dextran systems was analyzed in terms of the hydrophobicity difference between the phases and their ability to promote hydrophobic interactions between the protein surface and the PEG molecules. The values for R and log P(0) differed somewhat depending on which group of modified proteins was used for partitioning. The addition of NaCl to PEG/phosphate systems promoted an increase in the values of R, showing an important effect on the resolution of the systems for protein surface hydrophobicity (twice as high when compared with systems without NaCl). For PEG/dextran systems, the addition of 9% NaCl (w/w) promoted an improvement in the resolution toward surface hydrophobicity with an increase of 60% on the value of R. (c) 1996 John Wiley & Sons, Inc.     

Pancreatic serine protease extraction by affinity partition using a free triazine dye

Affinity partitioning combines the partitioning behavior of biological macromolecules in aqueous two-phase systems with the principle of biorecognition. Among the numerous substances that have been evaluated as ligands, the reactive dyes constitute a group of low cost textile dyes which have proved to act as biomimetic ligands for many enzymes. The ability of reactive yellow 2 (RY2) to interact with trypsin (TRP) and chymotrypsin (ChTRP) and its behavior in aqueous two-phase systems formed by polyethylene glycol (PEG) and sodium citrate (NaCit) - were investigated. Different variables such as PEG molecular weight, tie line length and dye concentration were analyzed. RY2 showed to bind specifically to both TRP and ChTRP with affinity constants near to 10(3)M(-1). Its partition equilibrium is practically displaced to the top phase in systems formed by PEG of different molecular weight. Addition of this dye to PEG 8000/NaCit systems until a final concentration of 0.196% (w/w) induced an increase in TRP and ChTRP partition coefficients of at least 2 times over that in the absence of the ligand. These findings demonstrate that RY2 fulfils all the requirements to be considered as an affinity ligand in aqueous two-phase partitioning of TRP and ChTRP.     

Genetic engineering of protein-peptide fusions for control of protein partitioning in thermoseparating aqueous two-phase systems

Genetic engineering has been used for the fusion of peptides, with different length and composition, on a protein to study the effect on partitioning in aqueous two-phase systems containing thermoseparating polymers. Peptides containing 2-6 tryptophan residues or tryptophan plus 1-3 lysine or aspartate residues, were fused near the C-terminus of the recombinant protein ZZT0, where Z is a synthetic IgG-binding domain derived from domain B in staphylococcal protein A. The partitioning behavior of the peptides and fusion proteins were studied in an aqueous two-phase system composed of dextran and the thermoseparating ethylene oxide-propylene oxide random copolymer, EO30PO70. The zwitterionic compound beta-alanine was used to reduce the charge-dependent salt effects on partitioning, and to evaluate the contribution to the partition coefficient from the amino acid residues, Trp, Lys, and Asp, respectively. Trp was found to direct the fusion proteins to the EO-PO copolymer phase, while Asp and Lys directed them to the dextran phase. The effect of sodium perchlorate and triethylammonium phosphate on the partitioning of the fusion proteins was also studied. Salt effects were directly proportional to the net charge of the fusion proteins. Sodium perchlorate was found to be 3.5 times more effective in directing positively charged proteins to the EO-PO copolymer phase compared to the effect of triethyl ammonium phosphate on negatively charged proteins. An empirical correlation has been tested where the fusion protein partitioning is a result of independent contributions from unmodified protein, fused peptide, and salt effects. A good agreement with experimental data was obtained which indicates the possibility, by independent measurements of partitioning of target protein and fusion peptide, to approximately predict the fusion protein partitioning.     

Predicting the partition coefficients of a recombinant cutinase in polyethylene glycol/phosphate aqueous two-phase systems

A model for the prediction of protein partition coefficients in aqueous two-phase systems has been developed. This model accounts for both charge-independent and electrostatic effects. The determination of nonelectrostatic effects was based on the model of Eiteman and Gainer for uncharged solutes while the electrostatic contribution was computed using TITRA, a program that uses a continuum electrostatic model to treat charge interactions in proteins and considers the effect of pH and ionic strength. The partition coefficients of Fusarium solani pisi recombinant cutinase have been satisfactorily predicted in polyethylene glycol (PEG) 1000 and phosphate aqueous two-phase systems at a pH range of 6.0-9.0. The model failed to predict the enzyme partitioning behavior at pH 4.5. (c) 1997 John Wiley & Sons, Inc. Biotechnol Bioeng 56: 248-257, 1997.     

LPS–protein aggregation influences protein partitioning in aqueous two-phase micellar systems

Lipopolysaccharide endotoxins (LPS) are the most common pyrogenic substances in recombinant peptides and proteins purified from Gram-negative bacteria, such as Escherichia coli. In this respect, aqueous two-phase micellar systems (ATPMS) have already proven to be a good strategy to purify recombinant proteins of pharmaceutical interest and remove high LPS concentrations. In this paper, we review our recent experimental work in protein partitioning in Triton X-114 ATPMS altogether with some new results and show that LPS–protein aggregation can influence both protein and LPS partitioning. Green fluorescent protein (GFPuv) was employed as a model protein. The ATPMS technology proved to be effective for high loads of LPS removal into the micelle-rich phase (%REM_LPS?>?98 %) while GFPuv partitioned preferentially to the micelle-poor phase (K _GFPuv?<?1.00) due to the excluded-volume interactions. However, theoretically predicted protein partition coefficient values were compared with experimentally obtained ones, and good agreement was found only in the absence of LPS. Dynamic light scattering measurements showed that protein–LPS interactions were taking place and influenced the partitioning process. We believe that this phenomenon should be considered in LPS removal employing any kind of aqueous two-phase system. Nonetheless, ATPMS can still be considered as an efficient strategy for high loads of LPS removal, but being aware that the excluded-volume partitioning theory available might overestimate partition coefficient values due to the presence of protein–LPS aggregation.     

A method for three-dimensional protein characterization and its application to a complex plant (corn) extract

Knowledge of host protein properties is critical for developing purification methods for recombinant proteins from a specific host, or for choosing suitable hosts and targeted expression tissues for a specific recombinant protein. A method to obtain a three-dimensional (3D) map (surface hydrophobicity (SH), isoelectric point (pI), and molecular weight (MW)), of a host's aqueous soluble protein properties was developed. The method consists of hydrophobic partitioning in a PEG 3350 (15.7%)-Na(2)SO(4) (8.9%)-NaCl (3%) aqueous two-phase (ATP) system followed by quantitative, 2D-electrophoretic characterization of the proteins of each equilibrium phase and the original extract. The pI and MW of host proteins were obtained directly through 2D electrophoresis. The partition coefficients of individual proteins were obtained by quantitative matching of protein spots in the top and bottom phase gels and calculating the protein partition coefficients from this information. Correlation of the partition coefficient to a SH scale was established by partitioning several model proteins with known surface hydrophobicities in the same ATP system. The inclusion of the extract gel provided for a spot selection criterion based on satisfactory mass balance closure. The method is illustrated by application to a mixture of model proteins and to complex mixtures, that is, corn germ proteins extracted at pH 7 and pH 4.     

Conformational and electrostatic properties of unoccupied and liganded estrogen receptors determined by aqueous two-phase partitioning

The technique of aqueous two-phase partitioning (ATPP) has been used to characterize conformational and electrostatic properties of unoccupied and liganded rat uterine estrogen receptors. The adaptation of the hydroxylapatite receptor assay with ATPP systems has permitted estrogen receptor (ER) partition coefficients to be accurately determined, even when the partitioning process results in significant loss of ER binding capacity. The pH and salt dependences of estrogen receptor partition coefficients indicate that the theory governing partitioning behavior can be accurately applied to partitioning data obtained with crude cytosols. This technique has revealed a ligand-induced change in the properties of the unoccupied receptor that precedes the process of heat-induced transformation in vitro. The difference in partitioning behavior between unoccupied and nontransformed estrogen receptor is observed in all combinations of buffers and salts tested and is of equal magnitude as the difference between partition coefficients of nontransformed and transformed ER. The partition coefficients of both unoccupied and nontransformed ER are constant over the ER concentration range in which binding cooperativity has been previously demonstrated. The combined effects of salt and pH on ER partition coefficients indicate a pI of approximately 5.5 for both unoccupied and nontransformed estrogen receptors. However, the partition coefficients at the pI differ. It is concluded that estradiol binding to its unoccupied receptor results in a change in surface properties of the ER monomer that is independent of receptor transformation and makes the receptor less hydrophobic.