Directed evolution of proteins for increased stability and expression using yeast display

The expression of recombinant proteins incorporated into the cell wall of Saccharomyces cerevisiae (yeast surface display) is an important tool for protein engineering and library screening applications. In this review, we discuss the state-of-the-art yeast display techniques used for stability engineering of proteins including antibody fragments and immunoglobulin-like molecules. The paper discusses assets and drawbacks of stability engineering using the correlation between expression density on the yeast surface and thermal stability with respect to the quality control system in yeast. Additionally, strategies based on heat incubation of surface displayed protein libraries for selection of stabilized variants are reported including a recently developed method that allows stabilization of proteins of already high intrinsic thermal stability like IgG1-Fc.     

Protein micro- and macroarrays: digitizing the proteome

The early applications of microarrays and detection technologies have been centered on DNA-based applications. The application of array technologies to proteomics is now occurring at a rapid rate. Numerous researchers have begun to develop technologies for the creation of microarrays of protein-based screening tools. The stability of antibody molecules when bound to surfaces has made antibody arrays a starting point for proteomic microarray technology. To minimize disadvantages due to size and availability, some researchers have instead opted for antibody fragments, antibody mimics or phage display technology to create libraries for protein chips. Even further removed from antibodies are libraries of aptamers, which are single-stranded oligonucleotides that express high affinity for protein molecules. A variation on the theme of protein chips arrayed with antibody mimics or other protein capture ligand is that of affinity MS where the protein chips are directly placed in a mass spectrometer for detection. Other approaches include the creation of intact protein microarrays directly on glass slides or chips. Although many of the proteins may likely be denatured, successful screening has been demonstrated. The investigation of protein-protein interactions has formed the basis of a technique called yeast two-hybrid. In this method, yeast "bait" proteins can be probed with other yeast "prey" proteins fused to DNA binding domains. Although the current interpretation of protein arrays emphasizes microarray grids of proteins or ligands on glass slides or chips, 2-D gels are technically macroarrays of authentic proteins. In an innovative departure from the traditional concept of protein chips, some researchers are implementing microfluidic printing of arrayed chemistries on individual protein spots blotted onto membranes. Other researchers are using in-jet printing technology to create protein microarrays on chips. The rapid growth of proteomics and the active climate for new technology is driving a new generation of companies and academic efforts that are developing novel protein microarray techniques for the future.     

Highly efficient selection of epitope specific antibody through competitive yeast display library sorting

Combinatory antibody library display technologies have been invented and successfully implemented for the selection and engineering of therapeutic antibodies. Precise targeting of important epitopes on the protein of interest is essential for such isolated antibodies to serve as effective modulators of molecular interactions. We developed a strategy to efficiently isolate antibodies against a specific epitope on a target protein from a yeast display antibody library using dengue virus envelope protein domain III as a model target. A domain III mutant protein with a key mutation inside a cross-reactive neutralizing epitope was designed, expressed, and used in the competitive panning of a yeast display naïve antibody library. All the yeast display antibodies that bound to the wild type domain III but not to the mutant were selectively sorted and characterized. Two unique clones were identified and showed cross-reactive binding to envelope protein domain IIIs from different serotypes. Epitope mapping of one of the antibodies confirmed that its epitope overlapped with the intended neutralizing epitope. This novel approach has implications for many areas of research where the isolation of epitope-specific antibodies is desired, such as selecting antibodies against conserved epitope(s) of viral envelope proteins from a library containing high titer, high affinity non-neutralizing antibodies, and targeting unique epitopes on cancer-related proteins.     

Human anti-EGFL7 recombinant full-length antibodies selected from a mammalian cell-based antibody display library

Epidermal growth factor-like domain 7 (EGFL7) has been implicated in promoting solid tumor growth and metastasis via stimulating tumor-associated angiogenesis. The advent of antibody display technology (phage, bacteria, and yeast) led to an enormous revival in the use of antibodies as diagnostic and therapeutic tools for fighting cancer. However, problems with protein folding, posttranslational modification, and codon usage still limit the number of improved antibodies that can be obtained. We describe here the isolation of an EGFL7-specific antibody from a mammalian cell-based full-length antibody display library generated from peripheral blood mononuclear cells of patients with hepatocellular carcinoma. Using a novel vector, contained glycosylphosphatidylinositol anchor and restriction enzyme sites NheI and ClaI, antibody libraries are displayed as whole IgG molecules on the cell surface and screened for specific antigen binding by a combination of magnetic beads and measured by cell ELISA. Anti-EGFL7 antibody was successfully isolated from the library. The mammalian cell-based full-length antibody display library is a great potential application for rapid identification and cloning of human mAbs of targeting hepatocellular carcinoma.     

Antibody engineering using phage display with a coiled-coil heterodimeric Fv antibody fragment

A Fab-like antibody binding unit, ccFv, in which a pair of heterodimeric coiled-coil domains was fused to V(H) and V(L) for Fv stabilization, was constructed for an anti-VEGF antibody. The anti-VEGF ccFv showed the same binding affinity as scFv but significantly improved stability and phage display level. Furthermore, phage display libraries in the ccFv format were constructed for humanization and affinity maturation of the anti-VEGF antibody. A panel of V(H) frameworks and V(H)-CDR3 variants, with a significant improvement in affinity and expressibility in both E. coli and yeast systems, was isolated from the ccFv phage libraries. These results demonstrate the potential application of the ccFv antibody format in antibody engineering.     

Generation of recombinant antibodies and means for increasing their affinity

Highly specific interaction with foreign molecules is a unique feature of antibodies. Since 1975, when Keller and Milstein proposed the method of hybridoma technology and prepared mouse monoclonal antibodies, many antibodies specific to various antigens have been obtained. Recent development of methods for preparation of recombinant DNA libraries and in silico bioinformatics approaches for protein structure analysis makes possible antibody preparation using gene engineering approaches. The development of gene engineering methods allowed creating recombinant antibodies and improving characteristics of existing antibodies; this significantly extends the applicability of antibodies. By modifying biochemical and immunochemical properties of antibodies by changing their amino acid sequences it is possible to create antibodies with properties optimal for certain tasks. For example, application of recombinant technologies resulted in antibody preparation of high affinity significantly exceeding the initial affinity of natural antibodies. In this review we summarize information about the structure, modes of preparation, and application of recombinant antibodies and their fragments and also consider the main approaches used to increase antibody affinity.     

Application of the arming system for the expression of the 380R antigen from red sea bream iridovirus (RSIV) on the surface of yeast cells: a first step for the development of an oral vaccine

The cell surface is a functional interface between the inside and the outside of the cell. Moreover, cells have systems for anchoring surface specific proteins and for confining surface proteins to particular domains on the cell surface. For use in bioindustrial processes applied to oral vaccination, we consider that cell-surface display systems must be useful and that the yeast Saccharomyces cerevisiae, the most suitable microorganism for practical purposes, is available as a host for genetic engineering because it can be subjected to many genetic manipulations. In particular, the rigid structure of the cell makes the yeast suitable for several of the applications. In this study, we describe the expression of one of the target antigens, 380R, from the red sea bream iridovirus (RSIV), which is one of the most common viral diseases in the cultured marine fish Pagrus major in Japan, using the arming yeast system and aiming at its application for oral vaccination. We first performed the molecular cloning and expression of the 380R antigen from RSIV in Escherichia coli. The nucleotide sequence of the 380R antigen was composed of an open reading frame (ORF) of 1360 bp encoding a protein of 453 residues. To prepare a specific antibody against the 380R antigen, the recombinant protein was overexpressed and purified in E. coli. As a result of indirect immunofluorescence with the specific antibody, we could observe the expression of the 380R antigen on the surface of the yeast cells. Thus, we have successfully prepared the source of an oral vaccine using cell-surface display technology in yeast.     

Development of a human light chain variable domain (V(L)) intracellular antibody specific for the amino terminus of huntingtin via yeast surface display

Intracellular antibodies (intrabodies) provide an attractive means for manipulating intracellular protein function, both for research and potentially for therapy. A challenge in the isolation of effective intrabodies is the ability to find molecules that exhibit sufficient binding affinity and stability when expressed in the reducing environment of the cytoplasm. Here, we have used yeast surface display of proteins to isolate novel scFv clones against huntingtin from a non-immune human antibody library. We then applied yeast surface display to affinity mature this scFv pool and analyze the location of the binding site of the mutant with the highest affinity. Interestingly, the paratope was mapped exclusively to the variable light chain domain of the scFv. A single domain antibody was constructed consisting solely of this variable light chain domain, and was found to retain full binding activity to huntingtin. Cytoplasmic expression levels in yeast of the single domain were at least fivefold higher than the scFv. The ability of the single-domain intrabody to inhibit huntingtin aggregation, which has been implicated in the pathogenesis of Huntington's disease (HD), was confirmed in a cell-free in vitro assay as well as in a mammalian cell culture model of HD. Significantly, a single-domain intrabody that is functionally expressable in the cytoplasm was derived from a non-functional scFv by performing affinity maturation and binding site analysis on the yeast cell surface, despite the differences between the cytoplasmic and extracellular environment. This approach may find application in the development of intrabodies to a wide variety of intracellular targets.     

Femtomolar Fab binding affinities to a protein target by alternative CDR residue co-optimization strategies without phage or cell surface display

In therapeutic or diagnostic antibody discovery, affinity maturation is frequently required to optimize binding properties. In some cases, achieving very high affinity is challenging using the display-based optimization technologies. Here we present an approach that begins with the creation and clonal, quantitative analysis of soluble Fab libraries with complete diversification in adjacent residue pairs encompassing every complementarity-determining region position. This was followed by alternative recombination approaches and high throughput screening to co-optimize large sets of the found improving mutations. We applied this approach to the affinity maturation of the anti-tumor necrosis factor antibody adalimumab and achieved ~500-fold affinity improvement, resulting in femtomolar binding. To our knowledge, this is the first report of the in vitro engineering of a femtomolar affinity antibody against a protein target without display screening. We compare our findings to a previous report that employed extensive mutagenesis and recombination libraries with yeast display screening. The present approach is widely applicable to the most challenging of affinity maturation efforts.     

Femtomolar Fab binding affinities to a protein target by alternative CDR residue co-optimization strategies without phage or cell surface display

In therapeutic or diagnostic antibody discovery, affinity maturation is frequently required to optimize binding properties. In some cases, achieving very high affinity is challenging using the display-based optimization technologies. Here we present an approach that begins with the creation and clonal, quantitative analysis of soluble Fab libraries with complete diversification in adjacent residue pairs encompassing every complementarity-determining region position. This was followed by alternative recombination approaches and high throughput screening to co-optimize large sets of the found improving mutations. We applied this approach to the affinity maturation of the anti-tumor necrosis factor antibody adalimumab and achieved ~500-fold affinity improvement, resulting in femtomolar binding. To our knowledge, this is the first report of the in vitro engineering of a femtomolar affinity antibody against a protein target without display screening. We compare our findings to a previous report that employed extensive mutagenesis and recombination libraries with yeast display screening. The present approach is widely applicable to the most challenging of affinity maturation efforts.     

Dual display of proteins on the yeast cell surface simplifies quantification of binding interactions and enzymatic bioconjugation reactions

Yeast surface display, a well‐established technology for protein analysis and engineering, involves expressing a protein of interest as a genetic fusion to either the N‐ or C‐terminus of the yeast Aga2p mating protein. Historically, yeast‐displayed protein variants are flanked by peptide epitope tags that enable flow cytometric measurement of construct expression using fluorescent primary or secondary antibodies. Here, we built upon this technology to develop a new yeast display strategy that comprises fusion of two different proteins to Aga2p, one to the N‐terminus and one to the C‐terminus. This approach allows an antibody fragment, ligand, or receptor to be directly coupled to expression of a fluorescent protein readout, eliminating the need for antibody‐staining of epitope tags to quantify yeast protein expression levels. We show that this system simplifies quantification of protein‐protein binding interactions measured on the yeast cell surface. Moreover, we show that this system facilitates co‐expression of a bioconjugation enzyme and its corresponding peptide substrate on the same Aga2p construct, enabling enzyme expression and catalytic activity to be measured on the surface of yeast.     

噬菌体展示技术发展

噬菌体表面展示技术是一种将外源蛋白或抗体可变区与噬菌体表面特定蛋白质融合并展示于其表面,构建蛋白质或抗体库,并从中筛选特异蛋白质或抗体的基因工程技术。随着该项技术的不断完善和发展,噬菌体展示技术已被广泛应用于生命科学研究的不同领域,并显示了良好的应用前景。     

酵母表面展示酶技术

酵母表面工程是利用载体蛋白将外源蛋白以活性形式锚定于酵母细胞外表面,免去了外源蛋白的纯化和固定,并且对其有稳定作用。本文综述了酵母表面展示技术的原理、步骤、优点以及目前常见的酵母表面展示酶,如淀粉水解酶、纤维素水解酶、与木糖利用相关的酶、脂肪酶、有机磷水解酶的构建及应用。     

噬菌体展示技术发展

噬菌体表面展示技术是一种将外源蛋白或抗体可变区与噬菌体表面特定蛋白质融合并展示于其表面,构建蛋白质或抗体库,并从中筛选特异蛋白质或抗体的基因工程技术。随着该项技术的不断完善和发展,噬菌体展示技术已被广泛应用于生命科学研究的不同领域,并显示了良好的应用前景。     

Fluorescent labeling of antibody fragments using split GFP

Antibody fragments are easily isolated from in vitro selection systems, such as phage and yeast display. Lacking the Fc portion of the antibody, they are usually labeled using small peptide tags recognized by antibodies. In this paper we present an efficient method to fluorescently label single chain Fvs (scFvs) using the split green fluorescent protein (GFP) system. A 13 amino acid tag, derived from the last beta strand of GFP (termed GFP11), is fused to the C terminus of the scFv. This tag has been engineered to be non-perturbing, and we were able to show that it exerted no effect on scFv expression or functionality when compared to a scFv without the GFP11 tag. Effective functional fluorescent labeling is demonstrated in a number of different assays, including fluorescence linked immunosorbant assays, flow cytometry and yeast display. Furthermore, we were able to show that this split GFP system can be used to determine the concentration of scFv in crude samples, as well an estimate of antibody affinity, without the need for antibody purification. We anticipate this system will be of widespread interest in antibody engineering and in vitro display systems.     

Antibody engineering and modification technologies

Antibody engineering has become a well-developed discipline, encompassing discovery methods, production strategies, and modification techniques that have brought forth clinically investigated and marketed therapeutics. The realization of the long-standing goal of production of fully human monoclonal antibodies has focused intensive research on the clinical employment of this potent drug category. However, antibodies are large macromolecules that pose numerous challenges in formulation, optimal pharmacokinetics, manufacturing, stability, and process development. While further improvements in discovery technologies, such as phage display, ribosome display, and transgenic animals continue to advance our capacity to rapidly screen and refine optimal binding molecules, antibody engineers have recently focused more of their efforts on improving protein production and stability, as well as engineering improved biological properties in the effector domains of monoclonal antibodies. A second long-standing goal of antibody engineering, the development of targeted drugs, has not been wholly realized, but this obvious application for antibodies is currently undergoing increasing exploration. Minimal binding proteins, such as Fab, scFv, and single variable domains are the preferred targeting elements for some investigational drugs, whereas non-immunoglobulin scaffold proteins have been explored as binding proteins in other designs. The necessity to utilize non-protein components in targeted drugs, such as polymers, linkers, and cytotoxics, has brought a convergence of the fields of bioconjugate chemistry and protein engineering in experimental antibody therapeutics.     

Development of an enzyme activity screening system for β-glucosidase-displaying yeasts using calcium alginate micro-beads and flow sorting

Recent reports on high-speed affinity screening systems for yeast cells using flow cytometry have not been adapted to screening yeast cells that display hydrolyzing enzymes, since the fluorescent molecules which are released from fluoresceinated substrate diffuse into solution after enzymatic reaction. In this research, yeast cells displaying β-glycosidase were individually captured in micro-sized calcium alginate beads by using the newly developed reverse micelle method to prevent diffusion of hydrolyzed fluorescent substrates. By adopting flow sorting to these captured cells, active cells were successfully enriched about 82-fold from a mixed suspension with negative controls. This system should be a useful method for high-speed screening of yeast cells that display various hydrolyzing enzymes and has potential application to screening randomized libraries of enzyme-displayed yeast cells with higher activities.     

抗体库技术与策略进展

抗体库为基因工程抗体领域带来了革命性的突破,其技术核心是将抗体的表型与基因型偶联,从抗体库中找到针对特异抗原的抗体基因。抗体库的基因可来自免疫或非免疫的策略;抗体分子形式包括Fab、单链抗体、单域抗体、微型抗体、最小识别单位等;展示平台包括噬菌体、核糖体、酵母、细菌、杆状病毒、哺乳细胞等;筛选策略包括抗原、细胞、组织切片、体内筛选等。抗体库在操作上具有高通量、工程化的特点,便于实现产业化,显示出巨大的商业开发价值。     

酵母表达体系及其在抗体工程中的应用

酵母是最简单的真核生物,以其为宿主表达异源蛋白具有很大的优越性。近十几年来,各种各样的酵母表达体系陆续发展起来。本文介绍了两种酵母表达系统,并对现有的主要表达体系进行了比较。另外,本文还涉及到酵母在表达抗体或其片段方面的成功应用。     

Monoclonal antibodies, 30 years of success

The hybridoma fusion technology, proposed in 1975, gave for the first time an access to murine monoclonal antibodies. The high potential of these new molecules, as laboratory tools, was exploited during the two following decades. Nowadays, antibodies, still omnipresent in both diagnostic and research domains, have progressively invaded the therapeutic field. New technologies, such as phage display and transgenic mice, have been implemented, allowing for the isolation of fully human antibodies. The natural complexity of the antibody molecules and the development of engineering methodologies helped making them ideal candidates for new applications and immunotherapeutic challenges. The present review is a temporary update of the different antibody-derived molecules as well as a walk-through among the techniques recently applied to antibody engineering. In addition it also address an important issue, such as the development of expression systems suitable large-scale production of recombinant antibodies.