Uracil DNA glycosylase-mediated cloning of polymerase chain reaction-amplified DNA: application to genomic and cDNA cloning.

A simple and rapid method for cloning of amplification products directly from the polymerase chain reaction (PCR) has been developed. The method is based on the addition of a 12-base dUMP-containing sequence (CUACUACUACUA) to the 5' end of PCR primers. Incorporation of these primers during PCR results in the selective placement of dUMP residues into the 5' end of amplification products. Selective degradation of the dUMP residues in the PCR products with uracil DNA glycosylase (UDG) disrupts base pairing at the termini and generates 3' overhangs. Annealing of 3' protruding termini to vector DNA containing complementary 3' ends results in chimeric molecules which can be transformed, with high efficiency, without in vitro ligation. Directional cloning of PCR products has also been accomplished by incorporating different dU-containing sequences at the end of each PCR primer. Substitution of all dT residues in PCR primers with dU eliminates cloning of aberrant "primer dimer" products and enriches cloning of genuine PCR products. The method has been applied to cloning of inter-Alu DNA sequences from human placental DNA. Using a single primer, DNA sequences between appropriately oriented Alu sequences were amplified and cloned. Cloning of cDNA for the glyceraldehyde-3'-phosphate dehydrogenase gene from rat brain RNA was also demonstrated. The 3' end region of this gene was amplified by the 3' RACE method and the amplified DNA was cloned after UDG digestion. Characterization of cloned DNAs by sequence analysis showed accurate repair of the cloning junctions. The ligase-free cloning method with UDG should prove to be a widely applicable procedure for rapid cloning of PCR-amplified DNA.     

PCR clamping

An efficient, PCR based method for the selective amplification of DNA target sequences that differs by a single base pair is described. The method utilises the high affinity and specificity of PNA for their complementary nucleic acids and that PNA cannot function as primers for DNA polymerases.     

Single base pair mutation analysis by PNA directed PCR clamping.

A novel method that allows direct analysis of single base mutation by the polymerase chain reaction (PCR) is described. The method utilizes the finding that PNAs (peptide nucleic acids) recognize and bind to their complementary nucleic acid sequences with higher thermal stability and specificity than the corresponding deoxyribooligonucleotides and that they cannot function as primers for DNA polymerases. We show that a PNA/DNA complex can effectively block the formation of a PCR product when the PNA is targeted against one of the PCR primer sites. Furthermore, we demonstrate that this blockage allows selective amplification/suppression of target sequences that differ by only one base pair. Finally we show that PNAs can be designed in such a way that blockage can be accomplished when the PNA target sequence is located between the PCR primers.     

Nucleotide clusters in deoxyribonucleic acids: sequence analysis of DNA using pyrimidine oligonucleotides as primers in the DNA polymerase I repair reaction.

Pyrimidine oligonucleotides have been shown to prime the E. coli DNA polymerase I repair reaction, specifically and reproducibly. DNA molecules up to 30 nucleotides long have been obtained from the extension of oligopyrimidine primers, 9 to 11 nucleotides long isolated from the complementary (minus) strand of bacteriophage S13 RFDNA using S13 viral DNA as the template molecule. The sequences of the extended primers were determined from mobility shift following separation of partially extended primers by ionophoresis and homochromatography, and by a modification of the "plus" system of Sanger and Coulson (1975). The 3' leads to 5' exonuclease activity of E. coli DNA polymerase was utilized for the "plus" system in the presence of single dNTPs and also with two dNTPs in the reaction, to give a nearest neighbor type of analysis for sequence confirmation. The ready availability of oligopyrimidine primers from any DNA and the simplification of the "plus" method broaden the range of applicability of the primed DNA polymerase I repair reaction for DNA sequence analysis.     

Detection of Bacillus anthracis from spores and cells by loop-mediated isothermal amplification without sample preparation

Loop-mediated isothermal amplification (LAMP) is a technique capable of rapidly amplifying specific nucleic acid sequences without specialized thermal cycling equipment. In addition, several detection methods that include dye fluorescence, gel electrophoresis, turbidity and colorimetric change, can be used to measure or otherwise detect target amplification. To date, publications have described the requirement for some form of sample nucleic acid extraction (boiling, lysis, DNA purification, etc.) prior to initiating a LAMP reaction. We demonstrate here, the first LAMP positive results obtained from vegetative cells and spores of Bacillus anthracis without nucleic acid extraction. Our data show that the simple addition of cells or spores to the reaction mixture, followed by heating at 63°C is all that is required to reproducibly amplify and detect target plasmid and chromosomal DNA via colorimetric change. The use of three primer sets targeting both plasmids and the chromosome of B. anthracis allows for the rapid discrimination of non-pathogenic bacteria from pathogenic bacteria within 30 min of sampling. Our results indicate that direct testing of B. anthracis spores and cells via LAMP assay will greatly simplify and shorten the detection process by eliminating nucleic acid purification. These results may allow more rapid detection of DNA from pathogenic organisms present in field and environmental samples.     

A sensitive nonisotopic hybridization assay for HIV-1 DNA

We have developed a microtiter-based sandwich hybridization assay for the detection of low copy number HIV-1 sequences. The assay employs a capture DNA sequence covalently coupled to microtiter wells through linker arms. The detection probe is a biotin-labeled DNA fragment derived from sequences adjacent to the capture sequence. After hybridization in the presence of sample nucleic acid, the detection probe remains bound only if the sample contained complementary sequences spanning the junction between capture and detection probes. The amount of detection probe bound is quantified by incubation with a peroxidase-streptavidin conjugate and a colorimetric peroxidase substrate. This assay has been combined with enzymatic target amplification to achieve sensitive detection of HIV-1 in patient samples. Following amplification of HIV-1 DNA using the polymerase chain reaction technique, a 190-bp product is produced. This product is easily and specifically quantified using the sandwich hybridization assay. The resulting test can detect one HIV-1-infected cell in 10(5) cells or about 30 molecules of HIV-1 DNA.     

Elimination of introns from the interleukin 1 beta genome by DNA amplification and expression of interleukin 1 beta in Escherichia coli]

The use of the polymerase chain reaction was proposed for intron excision from genomic genes with known nucleotide sequences. Three exons (5, 6 and 7) of genomic interleukin 1 beta gene were amplified by means of thermostable DNA polymerase TthI from Thermus thermophilus on the base of cloned in M13 phage human genomic interleukin 1 beta gene. Synthetic oligonucleotides complementary to sequences flanking exons were used as primers. The fragments obtained by exon DNA amplification were joined in the correct order due to reciprocal complementation of end sequences, that was foreseen during synthesis of oligonucleotide primers followed by amplification of the enlarged fragments. As a result the structural interleukin-1 beta gene consisting of three exons was assembled. DNA sequences carrying the ATG initiation codon and XbaI recognition site at the 5'-end, and PstI recognition site at the 3'-end (essential for insertion into the expression vector) were formed by the additional end sequences of primers. The nucleotide sequence analysis of the obtained structural gene revealed its complete identity with natural interleukin 1 beta human gene. We created the expression vector pPR114 with phage lambda promoter PR thermo-inducible in case of the cIts857 repressor presence in cells. It was used for expression of the present gene. The interleukin 1 beta synthesized in E. coli had biological activity.     

RNA biosensor for the rapid detection of viable Escherichia coli in drinking water

A highly sensitive and specific RNA biosensor was developed for the rapid detection of viable Escherichia coli as an indicator organism in water. The biosensor is coupled with protocols developed earlier for the extraction and amplification of mRNA molecules from E. coli [Anal. Biochem. 303 (2002) 186]. However, in contrast to earlier detection methods, the biosensor allows the rapid detection and quantification of E. coli mRNA in only 15-20 min. In addition, the biosensor is portable, inexpensive and very easy to use, which makes it an ideal detection system for field applications. Viable E. coli are identified and quantified via a 200 nt-long target sequence from mRNA (clpB) coding for a heat shock protein. For sample preparation, a heat shock is applied to the cells prior to disruption. Then, mRNA is extracted, purified and finally amplified using the isothermal amplification technique Nucleic acid sequence-based amplification (NASBA). The amplified RNA is then quantified with the biosensor. The biosensor is a membrane-based DNA/RNA hybridization system using liposome amplification. The various biosensor components such as DNA probe sequences and concentration, buffers, incubation times have been optimized, and using a synthetic target sequence, a detection limit of 5 fmol per sample was determined. An excellent correlation to a much more elaborate and expensive laboratory based detection system was demonstrated, which can detect as few as 40 E. coli cfu/ml. Finally, the assay was tested regarding its specificity; no false positive signals were obtained from other microorganisms or from nonviable E. coli cells.     

Locked Nucleic Acid Pentamers as Universal PCR Primers for Genomic DNA Amplification

Background

Multiplexing technologies, which allow for simultaneous detection of multiple nucleic acid sequences in a single reaction, can save a lot of time, cost and labor compared to traditional single reaction detection methods. However, the multiplexing method currently used requires precise handiwork and many complicated steps, making a new, simpler technique desirable. Oligonucleotides containing locked nucleic acid residues are an attractive tool because they have strong affinities for their complementary targets, they have been used to avoid dimer formation and mismatch hybridization and to enhance efficient priming. In this study, we aimed to investigate the use of locked nucleic acid pentamers for genomic DNA amplification and multiplex genotyping.

Results

We designed locked nucleic acid pentamers as universal PCR primers for genomic DNA amplification. The locked nucleic acid pentamers were able to prime amplification of the selected sequences within the investigated genomes, and the resulting products were similar in length to those obtained by restriction digest. In Real Time PCR of genomic DNA from three bacterial species, locked nucleic acid pentamers showed high priming efficiencies. Data from bias tests demonstrated that locked nucleic acid pentamers have equal affinities for each of the six genes tested from the Klebsiella pneumoniae genome. Combined with suspension array genotyping, locked nucleic acid pentamer-based PCR amplification was able to identify a total of 15 strains, including 3 species of bacteria, by gene- and species-specific probes. Among the 32 species used in the assay, 28 species and 50 different genes were clearly identified using this method.

Conclusion

As a novel genomic DNA amplification, the use of locked nucleic acid pentamers as universal primer pairs in conjunction with suspension array genotyping, allows for the identification of multiple distinct genes or species with a single amplification procedure. This demonstrates that locked nucleic acid pentamer-based PCR can be utilized extensively in pathogen identification.     

Frankia genus-specific characterization by polymerase chain reaction.

The polymerase chain reaction (PCR) is an in vitro procedure for primer-directed enzymatic amplification of specific template nucleic acid sequences. In order to determine whether a given actinomycete isolated from an actinorhiza (nodule) belongs to the genus Frankia or is a contaminant, we have developed a test based on the PCR. Primers complementary to sequences of two DNA regions corresponding to the nif genes (nifH and nifD) and the rRNA genes (16S and 23S) were specifically chosen to differentially amplify DNAs from Frankia strains but not those from other microorganisms. A series of positive and negative controls were set up by using universal or selective primers resulting in a discriminant amplification, which could be detected after agarose gel electrophoresis. In the nif region, degenerate oligonucleotide primers were used to amplify a target common to all the nitrogen-fixing microorganisms tested, while another set of primers amplified a target with a high specificity for Frankia strains. In the rRNA gene region, universal and specific primers were characterized and tested with DNAs from a wide range of microorganisms. The efficiency of this rapid and sensitive PCR assay was tested with an isolate obtained from Alnus nepalensis nodules, confirming results obtained by nodulation tests.     

Rapid and sensitive detection of heat-labile I and heat-stable I enterotoxin genes of enterotoxigenic Escherichia coli by Loop-Mediated Isothermal Amplification

We developed a technique for detecting the heat-labile I (LTI) and heat-stable I (STI) genes of enterotoxigenic Escherichia coli (ETEC) using a novel DNA amplification procedure designated Loop-Mediated Isothermal Amplification (LAMP). The detection limit of accelerated LAMP utilizing loop primers was 4 CFU/test for LTI and was 40 CFU/test for STI, which are 10-fold higher than those of conventional PCR assay (detection limit, 40 CFU/test and 400 CFU/test, respectively). No DNA amplification was observed in LT and ST non-producing E. coli or other bacterial strains; thus, high specificity was verified. The specificity of LAMP assay was also confirmed by digestion of LAMP products using restriction enzymes and DNA sequence analysis. In the accelerated LAMP assay, DNA amplification was detected within 35 min, and thus LAMP is superior to conventional PCR in terms of rapidity. It was confirmed that increased concentrations of primers and Bst DNA polymerase could further facilitate the reaction. Furthermore, with the high amplification efficiency of the LAMP assay, amplification can be visually observed by the turbidity caused by magnesium pyrophosphate, a byproduct of the reaction. Detection of LTI and STI in ETEC by LAMP is thus an extremely rapid procedure with high sensitivity and specificity that requires no specialized equipment. This assay is expected to become a valuable tool for rapid diagnosis in ETEC infection.     

Frankia genus-specific characterization by polymerase chain reaction.

The polymerase chain reaction (PCR) is an in vitro procedure for primer-directed enzymatic amplification of specific template nucleic acid sequences. In order to determine whether a given actinomycete isolated from an actinorhiza (nodule) belongs to the genus Frankia or is a contaminant, we have developed a test based on the PCR. Primers complementary to sequences of two DNA regions corresponding to the nif genes (nifH and nifD) and the rRNA genes (16S and 23S) were specifically chosen to differentially amplify DNAs from Frankia strains but not those from other microorganisms. A series of positive and negative controls were set up by using universal or selective primers resulting in a discriminant amplification, which could be detected after agarose gel electrophoresis. In the nif region, degenerate oligonucleotide primers were used to amplify a target common to all the nitrogen-fixing microorganisms tested, while another set of primers amplified a target with a high specificity for Frankia strains. In the rRNA gene region, universal and specific primers were characterized and tested with DNAs from a wide range of microorganisms. The efficiency of this rapid and sensitive PCR assay was tested with an isolate obtained from Alnus nepalensis nodules, confirming results obtained by nodulation tests.     

Amplification by the polymerase chain reaction of a specific target sequence in the gene coding for Escherichia coli verotoxin (VTe variant)

Synthetic oligonucleotide primers were used in a polymerase chain reaction (PCR) protocol to target a specific sequence in the gene coding for the A subunit of Escherichia coli verotoxin (VTe-variant, VTev). This PCR protocol permits the VTe-variant target sequence to be distinguished from closely related sequences in the same coding regions for type 1, type 2, and type 2 variant E. coli verotoxins. This procedure will be a valuable adjunct to other DNA amplification techniques currently being used for molecular epidemiological studies of verotoxigenic E. coli.     

Annealing control primer system for improving specificity of PCR amplification

A novel primer designed to improve the specificity of PCR amplification, called the annealing control primer (ACP), comprises a tripartite structure with a polydeoxyinosine [poly(dI)] linker between the 3' end target core sequence and the 5' end nontarget universal sequence. We show that this ACP linker prevents annealing of the 5' end nontarget sequence to the template and facilitates primer hybridization at the 3' end to the target sequence at specific temperatures, resulting in a dramatic improvement of annealing specificity. The effect of this linker is demonstrated by the incorporation of ACP sequences as primers during the amplification of target nucleotide sequence and as hybridization probes in the genotyping of single nucleotide polymorphisms. This is the first report to show that a poly(dI) linker between two different sequences of ACP forms a bubble-like structure and disrupts or destabilizes DNA duplex formation at certain annealing temperatures.     

Retrieval of entire genes from environmental DNA by inverse PCR with pre-amplification of target genes using primers containing locked nucleic acids

We had been unsuccessful to amplify desired nucleotide sequences from various environmental DNA samples by using the inverse polymerase chain reaction (IPCR) technique, most probably because the copy numbers of target DNA sequences had been quite low. To enrich the target DNA sequences prior to IPCR, a rolling-circle amplification was used with a site-specific primer containing locked nucleic acids (LNAs). This pre-amplified IPCR (PAI-PCR) method increased the sensitivity of PCR almost 10 000 times compared with the standard IPCR in model experiments using Escherichia coli . We then applied the PAI-PCR method to isolate glycosyl hydrolase genes from DNAs extracted from vermiform appendixes of horses and termite guts. The flanking sequences of the target genes were amplified and cloned successfully using PAI-PCR, whereas standard IPCR resulted in no amplification.     

Molecular cloning of the Harvey sarcoma virus circular DNA intermediates. II. Further structural analyses.

Three species of unintegrated supercoiled Harvey sarcoma virus DNA (6.6, 6.0, and 5.4 kilobase pairs) have been molecularly cloned from Harvey sarcoma virus-infected cells. On the basis of restriction enzyme analyses, the 6.6- and 6.0-kilobase pair viral DNAs contain two and one copies, respectively, of a 650-base pair DNA segment which contains sequences present at the 3' and 5' termini of the viral genome. R-loop structures formed between Moloney leukemia virus RNA and the cloned Harvey sarcoma virus DNA indicated that about 500 base pairs of the 650-base pair repeating segment was complementary to the 3' end of the viral RNA. During amplification in the Escherichia coli host, some recombinants containing the 6.6- or the 6.0-kilobase pair Harvey sarcoma virus DNA insert acquired or lost the complete 650-base pair DNA segment. These changes occurred in both recA+ and recA- E. coli.     

Chitosan scaffolds for biomolecular assembly: coupling nucleic acid probes for detecting hybridization

Chitosan, a naturally occurring biopolymer, was used as a scaffold for the covalent binding of single-stranded DNA oligonucleotide probes in a fluorescence-based nucleic acid hybridization assay. Chitosan's pH dependent chemical and electrostatic properties enable its deposition on electrodes and metal surfaces, as well as on the bottom of microtiter plates. A combinatorial 96-well microtiter plate format was used to optimize chemistries and reaction conditions leading to hybridization experiments. We found the coupling of oligonucleotides using relatively common glutaraldehyde chemistry was quite robust. Our hybridization results for complementary ssDNA oligonucleotides (E. coli dnaK sequences) demonstrated linear fluorescence intensity with concentration of E. coli dnaK-specific oligonucleotide from 0.73 microM to 6.6 microM. Moreover, hybridization assays were specific as there was minimal fluorescence associated with noncomplementary groEL oligonucleotide. Finally, these results demonstrate the portability of a DNA hybridization assay based on covalent coupling to chitosan, which, in turn, can be deposited onto various surfaces. More arduous surface preparation techniques involving silanizing agents and hazardous washing reagents are eliminated using this technique.