Genetic and biochemical characterization of MbeA,the relaxase involved in plasmid ColE1 conjugative mobilization

MbeA is a 60 kDa protein encoded by plasmid ColE1. It plays a key role in conjugative mobilization. MbeA*, a slightly truncated version of MbeA, was purified for in vitro analysis. MbeA* catalysed DNA cleavage and strand-transfer reactions using oligonucleotides embracing the ColE1 nic site, which was mapped to 5'-(1469)CTGG/CTTA(1462)-3'. Thus MbeA is the relaxase for ColE1 conjugal mobilization, in spite of the fact that it lacks a three histidine motif considered the invariant signature of conjugative relaxases. Amino acid sequence comparisons suggest MbeA is nevertheless related to the common relaxase protein family. For instance, MbeA residue Y19 could correspond to the invariant tyrosine in Motif I, whereas H97, E104 and N106 may constitute the equivalent residues to the histidine triad in Motif III. This hypothesis was tested by site-directed mutagenesis. MbeA amino acid residues Y19, H97, E104 and N106 were changed to alanine. MbeA mutant N106A showed reduced oligonucleotide cleavage and strand-transfer activities, whereas mutation in the other three residues resulted in proteins without detectable activity, suggesting they are directly implicated in catalysis of DNA-cleavage and strand-transfer reactions. A double substitution of E104 and N106 by histidines, therefore reconstituting the canonical histidine triad, restored relaxase activities to 1% of wild type. Thus, MbeA is a variant of the common relaxase theme with a HEN signature motif, which has to be added to the canonical three histidine motif of previously reported relaxases.     

Localization of TraC, a protein involved in assembly of the F conjugative pilus.

TraC is one of the proteins encoded by the F transfer region of the F conjugative plasmid which is required for the assembly of F pilin into the mature F pilus structure. Overproduction of this protein from the plasmid pKAS2, which carries only traC, resulted in the formation of inclusion bodies from which soluble TraC was purified. When small amounts of TraC were produced from pKAS2, the protein was localized to the cytoplasm by using anti-TraC antibodies. Similar analysis of a set of TraC-alkaline phosphatase fusion proteins localized all of these fusion proteins to the cytoplasm. However, when TraC was expressed from the F plasmid, much of it appeared associated with the bacterial membrane fraction. Under these conditions, TraC does not appear to be part of the tip of the F pilus, as neither anti-TraC antibodies nor purified TraC had any effect on the infection of F-containing bacteria by the filamentous bacteriophage f1. These data suggest that TraC is normally associated with the membrane through interactions with other proteins specified by the tra region. This interaction may be via the carboxyl-terminal region of the TraC protein, as a mutant TraC protein containing an Arg-Cys substitution at amino acid 811 exhibits an interaction with the membrane weaker than that of the wild-type protein in the presence of the other Tra proteins.     

A motif conserved among the type I restriction-modification enzymes and antirestriction proteins: a possible basis for mechanism of action of plasmid-encoded antirestriction functions.

Antirestriction proteins Ard encoded by some self-transmissible plasmids specifically inhibit restriction by members of all three families of type I restriction-modification (R-M) systems in E.coli. Recently, we have identified the amino acid region, 'antirestriction' domain, that is conserved within different plasmid and phage T7-encoded antirestriction proteins and may be involved in interaction with the type I R-M systems. In this paper we demonstrate that this amino acid sequence shares considerable similarity with a well-known conserved sequence (the Argos repeat) found in the DNA sequence specificity (S) polypeptides of type I systems. We suggest that the presence of these similar motifs in restriction and antirestriction proteins may give a structural basis for their interaction and that the antirestriction action of Ard proteins may be a result of the competition between the 'antirestriction' domains of Ard proteins and the similar conserved domains of the S subunits that are believed to play a role in the subunit assembly of type I R-M systems.     

Interaction between the IncHI1 plasmid R27 coupling protein and type IV secretion system: TraG associates with the coiled-coil mating pair formation protein TrhB

Assemblies of plasmid-encoded proteins direct the conjugative transfer of plasmid DNA molecules between bacteria. These include the membrane-associated mating pair formation (Mpf) complex necessary for pilus production and the cytoplasmic relaxosome required for DNA processing. The proposed link between these distinct protein complexes is the coupling protein (the TraG family of proteins). Interactions between the coupling protein and relaxosome components have been previously characterized and we document here, for the first time, a direct interaction between the coupling protein and an Mpf protein. Using the adenylate cyclase bacterial two-hybrid (BTH) system, we present in vivo evidence that the IncHI1 plasmid R27-encoded proteins TraG and TrhB interact. This interaction was verified through a co-immunoprecipitation reaction. We have also been able to delineate the interaction domain of TrhB to TraG by showing a positive interaction using the first 220 amino acids of TrhB (452 aa). TrhB has a proline-rich domain from amino acids 135-173 which may serve to facilitate protein interactions and/or periplasmic extension. TrhB self association was detected using far-Western, co-immunoprecipitation, and also BTH analysis, which was used to define the homotypic interaction domain, comprising a predicted coiled-coil region at residues 77-124 of TrhB. These data support a model in which the coupling protein interacts with an Mpf component to target the transferring DNA strand held by the relaxosome to the transmembrane Mpf complex.     

DnaA box sequences as the site for helicase delivery during plasmid RK2 replication initiation in Escherichia coli

DnaA box sequences are a common motif present within the replication origin region of a diverse group of bacteria and prokaryotic extrachromosomal genetic elements. Although the origin opening caused by binding of the host DnaA protein has been shown to be critical for the loading of the DnaB helicase, to date there has been no direct evidence presented for the formation of the DnaB complex at the DnaA box site. For these studies, we used the replication origin of plasmid RK2 (oriV), containing a cluster of four DnaA boxes that bind DnaA proteins isolated from different bacterial species (Caspi, R., Helinski, D. R., Pacek, M., and Konieczny, I. (2000) J. Biol. Chem. 275, 18454-18461). Size exclusion chromatography, surface plasmon resonance, and electron microscopy experiments demonstrated that the DnaB helicase is delivered to the DnaA box region, which is localized approximately 200 base pairs upstream from the region of origin opening and a potential site for helicase entry. The DnaABC complex was formed on both double-stranded superhelical and linear RK2 templates. A strict DnaA box sequence requirement for stable formation of that nucleoprotein structure was confirmed. In addition, our experiments provide evidence for interaction between the plasmid initiation protein TrfA and the DnaABC prepriming complex, formed at DnaA box region. This interaction is facilitated via direct contact between TrfA and DnaB proteins.     

Expression of functional beta-galactosidase containing the coxsackievirus 3C protease as an internal fusion

Alpha complementation of beta-galactosidase (beta gal) is intracistronic and requires interaction between the alpha donor region (residues 3-41) and alpha acceptor fragment (produced by M15). We have constructed two plasmids which direct the synthesis of hybrid beta gal: coxsackievirus proteins in Escherichia coli. One plasmid, pBD1045, encodes an enzymatically active 3C protease of coxsackievirus B3 fused between the amino-terminal 79 amino acids of beta gal (containing the alpha donor region) and amino acids 80 to 1023 (alpha acceptor region). A second plasmid, pBD1043 encodes an inactive 3C protease and results in a fusion of 260 coxsackievirus amino acids between residues 79 and 80 of the beta gal monomer. Both hybrid proteins expressed by these constructs have beta-galactosidase activity regardless of whether the viral protease (183 amino acids) is autocatalytically cleaved out of the chimeric protein (pBD1045) or remains as part of a fusion protein (pBD1043). The implications of these results for structural flexibility of the complemented beta-galactosidase enzyme are discussed.     

Functional domains of yeast plasmid-encoded Rep proteins

Both of the Saccharomyces cerevisiae 2 microm circle-encoded Rep1 and Rep2 proteins are required for efficient distribution of the plasmid to daughter cells during cellular division. In this study two-hybrid and in vitro protein interaction assays demonstrate that the first 129 amino acids of Rep1 are sufficient for self-association and for interaction with Rep2. Deletion of the first 76 amino acids of Rep1 abolished the Rep1-Rep2 interaction but still allowed some self-association, suggesting that different but overlapping domains specify these interactions. Amino- or carboxy-terminally truncated Rep1 fusion proteins were unable to complement defective segregation of a 2 microm-based stability vector with rep1 deleted, supporting the idea of the requirement of Rep protein interaction for plasmid segregation but indicating a separate required function for the carboxy-terminal portion of Rep1. The results of in vitro baiting assays suggest that Rep2 contains two nonoverlapping domains, both of which are capable of mediating Rep2 self-association. The amino-terminal domain interacts with Rep1, while the carboxy-terminal domain was shown by Southwestern analysis to have DNA-binding activity. The overlapping Rep1 and Rep2 interaction domains in Rep1, and the ability of Rep2 to interact with Rep1, Rep2, and DNA, suggest a model in which the Rep proteins polymerize along the 2 microm circle plasmid stability locus, forming a structure that mediates plasmid segregation. In this model, competition between Rep1 and Rep2 for association with Rep1 determines the formation or disassembly of the segregation complex.     

Analysis of the mobilization region of the broad-host-range IncQ-like plasmid pTC-F14 and its ability to interact with a related plasmid, pTF-FC2

Plasmid pTC-F14 is a 14.2-kb plasmid isolated from Acidithiobacillus caldus that has a replicon that is closely related to the promiscuous, broad-host-range IncQ family of plasmids. The region containing the mobilization genes was sequenced and encoded five Mob proteins that were related to those of the DNA processing (Dtr or Tra1) region of IncP plasmids rather than to the three-Mob-protein system of the IncQ group 1 plasmids (e.g., plasmid RSF1010 or R1162). Plasmid pTC-F14 is the second example of an IncQ family plasmid that has five mob genes, the other being pTF-FC2. The minimal region that was essential for mobilization included the mobA, mobB, and mobC genes, as well as the oriT gene. The mobD and mobE genes were nonessential, but together, they enhanced the mobilization frequency by approximately 300-fold. Mobilization of pTC-F14 between Escherichia coli strains by a chromosomally integrated RP4 plasmid was more than 3,500-fold less efficient than the mobilization of pTF-FC2. When both plasmids were coresident in the same E. coli host, pTC-F14 was mobilized at almost the same frequency as pTF-FC2. This enhanced pTC-F14 mobilization frequency was due to the presence of a combination of the pTF-FC2 mobD and mobE gene products, the functions of which are still unknown. Mob protein interaction at the oriT regions was unidirectionally plasmid specific in that a plasmid with the oriT region of pTC-F14 could be mobilized by pTF-FC2 but not vice versa. No evidence for any negative effect on the transfer of one plasmid by the related, potentially competitive plasmid was obtained.     

Mini-F plasmid mutants able to replicate in Escherichia coli deficient in the DnaJ heat shock protein.

A subset of Escherichia coli heat shock proteins, DnaJ, DnaK, and GrpE, is required for mini-F plasmid replication, presumably at the step of functioning of the RepE initiator protein. We have isolated and characterized mini-F plasmid mutants that acquired the ability to replicate in the Escherichia coli dnaJ259. The mutant plasmids were found to replicate in any of dnaJ, dnaK, and grpE mutant hosts tested. In each case, the majority of the mutant plasmids carried a unique amino acid alteration in a localized region of repE coding sequence and showed an increased copy number, whereas the minority contained a common single base change (C to T) in the promoter/operator region and produced an increased amount of RepE. All RepE proteins with altered residues (between 92 and 134) exhibited increased initiator activities (hyperactive), and many showed reduced repressor activities as well, indicating that this region is important for the both major functions of RepE protein. These results together with evidence reported elsewhere indicate that the subset of heat shock proteins serves to activate RepE protein prior to or during its binding to the replication origin and that the mutant RepE proteins are active even in their absence. We also found that a C-terminal lesion (repE602) reduces the initiator activity particularly of some hyperactive mutant RepE proteins but does not affect the repressor activity. This finding suggests a functional interaction between the central and C-terminal regions of RepE in carrying out the initiator function.     

A general system for studying protein-protein interactions in Gram-negative bacteria

One of the most promising methods for large-scale studies of protein interactions is isolation of an affinity-tagged protein with its in vivo interaction partners, followed by mass spectrometric identification of the copurified proteins. Previous studies have generated affinity-tagged proteins using genetic tools or cloning systems that are specific to a particular organism. To enable protein-protein interaction studies across a wider range of Gram-negative bacteria, we have developed a methodology based on expression of affinity-tagged "bait" proteins from a medium copy-number plasmid. This construct is based on a broad-host-range vector backbone (pBBR1MCS5). The vector has been modified to incorporate the Gateway DEST vector recombination region, to facilitate cloning and expression of fusion proteins bearing a variety of affinity, fluorescent, or other tags. We demonstrate this methodology by characterizing interactions among subunits of the DNA-dependent RNA polymerase complex in two metabolically versatile Gram-negative microbial species of environmental interest, Rhodopseudomonas palustris CGA010 and Shewanella oneidensis MR-1. Results compared favorably with those for both plasmid and chromosomally encoded affinity-tagged fusion proteins expressed in a model organism, Escherichia coli.     

Deficient Sumoylation of Yeast 2-Micron Plasmid Proteins Rep1 and Rep2 Associated with Their Loss from the Plasmid-Partitioning Locus and Impaired Plasmid Inheritance

The 2-micron plasmid of the budding yeast Saccharomyces cerevisiae encodes copy-number amplification and partitioning systems that enable the plasmid to persist despite conferring no advantage to its host. Plasmid partitioning requires interaction of the plasmid Rep1 and Rep2 proteins with each other and with the plasmid-partitioning locus STB. Here we demonstrate that Rep1 stability is reduced in the absence of Rep2, and that both Rep proteins are sumoylated. Lysine-to-arginine substitutions in Rep1 and Rep2 that inhibited their sumoylation perturbed plasmid inheritance without affecting Rep protein stability or two-hybrid interaction between Rep1 and Rep2. One-hybrid and chromatin immunoprecipitation assays revealed that Rep1 was required for efficient retention of Rep2 at STB and that sumoylation-deficient mutants of Rep1 and Rep2 were impaired for association with STB. The normal co-localization of both Rep proteins with the punctate nuclear plasmid foci was also lost when Rep1 was sumoylation-deficient. The correlation of Rep protein sumoylation status with plasmid-partitioning locus association suggests a theme common to eukaryotic chromosome segregation proteins, sumoylated forms of which are found enriched at centromeres, and between the yeast 2-micron plasmid and viral episomes that depend on sumoylation of their maintenance proteins for persistence in their hosts.     

ATP-regulated interactions between P1 ParA, ParB and non-specific DNA that are stabilized by the plasmid partition site, parS

Localization of the P1 plasmid requires two proteins, ParA and ParB, which act on the plasmid partition site, parS. ParB is a site-specific DNA-binding protein and ParA is a Walker-type ATPase with non-specific DNA-binding activity. In vivo ParA binds the bacterial nucleoid and forms dynamic patterns that are governed by the ParB-parS partition complex on the plasmid. How these interactions drive plasmid movement and localization is not well understood. Here we have identified a large protein-DNA complex in vitro that requires ParA, ParB and ATP, and have characterized its assembly by sucrose gradient sedimentation and light scattering assays. ATP binding and hydrolysis mediated the assembly and disassembly of this complex, while ADP antagonized complex formation. The complex was not dependent on, but was stabilized by, parS. The properties indicate that ParA and ParB are binding and bridging multiple DNA molecules to create a large meshwork of protein-DNA molecules that involves both specific and non-specific DNA. We propose that this complex represents a dynamic adaptor complex between the plasmid and nucleoid, and further, that this interaction drives the redistribution of partition proteins and the plasmid over the nucleoid during partition.     

Organization of the agropine synthesis region of the T-DNA of the Ri plasmid from Agrobacterium rhizogenes.

The agropine/mannopine synthesis region of the TR region of the Ri plasmid of Agrobacterium rhizogenes strain A4 was localized on the basis of sequence similarity with probes from Ti plasmids of Agrobacterium tumefaciens and analysis of transposon insertions. The nucleotide sequence of the right part of the TR-DNA of pRiA4, encompassing the three genes involved in mannityl-opine synthesis, was determined and compared to the sequence of the corresponding region of the octopine-type Ti plasmid pTi15955. The organization of this region is strongly conserved between Ri and Ti plasmids, but the similarity is restricted to the coding sequences: no homology was detected in the 5' and 3' flanking sequences. The mas1' and ags proteins are the most conserved, showing more than 68% amino acid conservation, whereas the mas2' proteins are only 59% identical. Significant G/C content and codon usage differences are observed between pTi15955 and pRiA4. An open reading frame strongly similar to that of bacterial repressors is situated immediately to the right of the TR region.     

Genetic analysis of the mobilization and leading regions of the IncN plasmids pKM101 and pCU1

The conjugative IncN plasmids pKM101 and pCU1 have previously been shown to contain identical oriT sequences as well as conserved restriction endonuclease cleavage patterns within their tra regions. Complementation analysis and sequence data presented here indicate that these two plasmids encode essentially identical conjugal DNA-processing proteins. This region contains three genes, traI, traJ, and traK, transcribed in the same orientation from a promoter that probably lies within or near the conjugal transfer origin (oriT). Three corresponding proteins were visualized by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, and complementation analysis confirmed that this region contains three tra complementation groups. All three proteins resemble proteins of the IncW plasmid R388 and other plasmids thought to have roles in processing of plasmid DNA during conjugation. The hydropathy profile of TraJ suggests a transmembrane topology similar to that of several homologous proteins. Both traK and traI were required for efficient interplasmid site-specific recombination at oriT, while traJ was not required. The leading region of pKM101 contains three genes (stbA, stbB, and stbC), null mutations in which cause elevated levels of plasmid instability. Plasmid instability was observed only in hosts that are proficient in interplasmid recombination, suggesting that this recombination can potentially lead to plasmid loss and that Stb proteins somehow overcome this, possibly via site-specific multimer resolution.     

Recognition of the P1 plasmid centromere analog involves binding of the ParB protein and is modified by a specific host factor.

The P1 plasmid partition system is responsible for segregation of daughter plasmids during division of the Escherichia coli host cell. The P1-encoded elements consist of two essential proteins, ParA and ParB, and the cis-acting incB region. The incB region determines partition-mediated incompatibility and contains the centromere-like site parS. We have isolated and purified the two proteins. ParB binds specifically to the incB region in vitro. DNase I footprinting assays place a strong binding site over the 35-bp parS sequence previously shown to be sufficient for partition when the Par proteins are supplied in trans. A weaker site lies within the incB region in sequences that are important for specifying incompatibility, but are not essential for partition. Gel band retardation assays show that a host factor binds specifically to the incB sequence. The factor strongly stimulates binding of ParB. Cutting the region at a site between the two ParB binding sites yields two fragments that can bind ParB but not host factor. Thus, information for host-factor binding lies in the region determining the specificity of plasmid incompatibility. The roles of parB and the host factor in partition and the specificity of plasmid incompatibility are discussed.     

Analysis of the replication region of a mycobacterial plasmid, pMSC262.

We determined the nucleotide sequence of a DNA fragment which contains the replication region of pMSC262, a Mycobacterium scrofulaceum plasmid used to construct the Mycobacterium-Escherichia coli shuttle vector. The complete sequence of the fragment contained 2,504 bp with an overall G+C content of 69.8%. By deletion analysis, we found that the minimum length required for plasmid replication in M. bovis BCG was about 1.6 kb. Within this region, several open reading frames (ORFs) and a putative replication origin (ori) were identified by computer analysis. One of the ORFs, ORF2, which encodes a putative 28.9-kDa basic protein with characteristics of DNA-binding proteins, appeared to be involved in replication of the plasmid in BCG. By separation of ORF2 and the putative ori region, it was revealed that the relative locations of ORF2 and the putative ori region are likely important for replication in BCG. No DNA or amino acid homologies were found between this replication region and that of pAL5000, another mycobacterial plasmid used for vector plasmid construction. In addition, we found that this replicon did not lead to replication in E. coli and was compatible in BCG with pAL5000-derived vector plasmid pYUB75 (R. G. Barletta, D. D. Kim, S. B. Snapper, B. R. Bloom, and W. R. Jacobs, J., J. Gen. Microbiol. 138:23-30, 1992).