Integration host factor of Escherichia coli reverses the inhibition of R6K plasmid replication by pi initiator protein.

Integration host factor (IHF) protein is the only host-encoded protein known to bind and to affect replication of the gamma origin of Escherichia coli plasmid R6K. We examined the ability of R6K origins to replicate in cells lacking either of the two subunits of IHF. As shown previously, the gamma origin cannot replicate in IHF-deficient cells. However, this inability to replicate was relieved under the following conditions: underproduction of the wild-type pi replication protein of R6K or production of normal levels of mutant pi proteins which exhibit relaxed replication control. The copy number of plasmids containing the primary R6K origins (alpha and beta) is substantially reduced in IHF-deficient bacteria. Furthermore, replication of these plasmids is completely inhibited if the IHF-deficient strains contain a helper plasmid producing additional wild-type pi protein. IHF protein has previously been shown to bind to two sites within the gamma origin. These sites flank a central repeat segment which binds pi protein. We propose a model in which IHF binding to its sites reduces the replication inhibitor activity of pi protein at all three R6K origins.     

Binding of DnaA protein to a replication enhancer counteracts the inhibition of plasmid R6K gamma origin replication mediated by elevated levels of R6K pi protein.

Replication of the gamma origin of Escherichia coli plasmid R6K requires pi protein, encoded by the R6K pir gene, and many host factors, including DnaA protein. Pi has dual roles, activating replication at low levels and inhibiting replication at high levels. The inhibitory function of pi is counteracted by integration host factor and a specific sequence of the origin called the enhancer. This 106-bp DNA segment contains a binding site for DnaA protein (DnaA box 1). In this study, we mutated this site to determine if it was required for the enhancer's function. Using gamma origin derivative plasmids with the DnaA box 1 altered or deleted, we show that this site is necessary to protect the origin against levels of wild-type pi protein that would otherwise inhibit replication. To show that the base substitutions in DnaA box 1 weakened the binding of DnaA, we developed a new application of the agarose gel retardation assay. This quick and easy assay has broad applicability, as shown in binding studies with DNA fragments carrying a different segment of the R6K origin, the chromosomal origin (oriC), or the pUC origin. The gel retardation assay suggests a stoichiometry of DnaA binding different from that deduced from other assays.     

Roles of a 106-bp origin enhancer and Escherichia coli DnaA protein in replication of plasmid R6K.

A dnaA 'null' strain could not support replication of intact plasmid R6K or derivatives containing combinations of its three replication origins (alpha, gamma, beta). DnaA binds in vitro to sites in two functionally distinct segments of the central gamma origin. The 277-bp core segment is common to all three origins and contains DnaA box 2, which cannot be deleted without preventing replication. Immediately to the left of the core lies the 106-bp origin enhancer, which contains DnaA box 1. When the origin enhancer is deleted, the core alone can still initiate replication if levels of wt pi protein are decreased or if copy-up pi mutant proteins are provided in trans. DnaA does not effect expression of R6K replication initiator protein pi, although several DnaA boxes were identified in the coding segment of the pir gene, which encodes pi. Together these data suggest that a single DnaA box, 2, is sufficient for initiation from the gamma origin and might be sufficient for initiation from the gamma origin and might be sufficient and required for the activity of the alpha and beta origins as well. Implications of the DnaA protein binding to two domains of the gamma origin and the role of the 106-bp origin enhancer in replication are discussed.     

Binding of purified wild-type and mutant pi initiation proteins to a replication origin region of plasmid R6K

The three replication origins of the antibiotic resistance plasmid R6K require for their activity in Escherichia coli a DNA segment containing seven 22 base-pair direct repeats and a plasmid-encoded initiation protein (pi). The pi protein functions in the negative control of R6K replication, in addition to its requirement for the initiation of replication. Construction of a plasmid containing the pi structural gene (pir) downstream from the inducible pR promoter of bacteriophage lambda provided high levels of production of pi protein in E. coli. The pi protein was purified and shown to possess general DNA binding properties with a preference for DNA fragments containing the gamma origin of replication, the operator region of the pir gene and the R6K beta-origin region. Velocity sedimentation analysis indicates that the pi protein exists as a dimer in its native form. Agarose gel electrophoresis analysis of pi-gamma-origin complexes suggests that one pi dimer binds to each copy of the 22 base-pair direct repeats in the gamma origin region. Purified mutant pi protein obtained from a temperature-sensitive initiation mutant (pir 105-ts) exhibited temperature-sensitive binding activity to the gamma-origin region, whereas two mutant proteins exhibiting a high copy number phenotype were unaltered (pir104-cop) or slightly reduced (pir1-cop) in binding activity. The patterns of DNase I protection and enhancement were similar for the wild-type and mutant proteins examined.     

Two alternative structures can be formed by IHF protein binding to the plasmid R6K gamma origin.

Escherichia coli integration host factor (IHF) contributes to the regulation of R6K plasmid copy number by counteracting the inhibitory activity of the plasmid-encoded replication protein pi. Two IHF-binding sites (ihf1 and ihf2) flank seven iterons in the origin which bind pi protein. As previously shown by electron microscopy, IHF can compact a large segment of the R6K gamma origin DNA, encompassing site ihf1, an AT-rich domain containing ihf1, and some of the seven iterons located downstream of ihf1. We termed this phenomenon IHF-mediated DNA folding. This folding requires a high IHF concentration, and the region of the origin (replication enhancer) located to the left of the AT-rich domain. However, site ihf2 is not necessary in forming the folded structure. As reported here, IHF binding to ihf2 can be detected in gel mobility shift assays only if the leftmost enhancer region is absent. Sites ihf1 and ihf2 each contain two consensus IHF sequences. Site-directed mutagenesis was performed to determine which sequences are recognized by IHF protein and which sites are involved in forming the various gamma origin-IHF complexes. Finally, we define the boundaries of protection from DNaseI digestion when IHF is bound to ihf2. We propose a model in which IHF protein bound to ihf1, in the absence of the enhancer region, facilitates IHF binding to ihf2.     

Control of replication of FII plasmids: comparison of the basic replicons and of the copB systems of plasmids R100 and R1

The copy numbers of the FII plasmids R1 and R100 were determined in four different ways and found to be identical. Deletion of one of the copy number control genes, copB, together with its promoter gives rise to plasmid copy mutants with an increased copy number. The increase was found to be 8- and 3.5-fold for plasmids R1 and R100, respectively. These deletion derivatives were found to be extremely sensitive to the presence of CopB activity from their own parent plasmid but not to that of the other plasmid. Hence, the CopB protein and its target are plasmid-specific and not FII-group-specific. These results are consistent with the high degree of nonhomology between plasmids R1 and R100 in a 250-bp region covering the distal part of the copB gene and the repA promoter region, which contains the target for the CopB protein.     

A single amino acid alteration in the initiation protein is responsible for the DNA overproduction phenotype of copy number mutants of plasmid R6K.

A novel type of high copy-number (cop) mutants of a mini-R6K plasmid were isolated. The mutations were mapped in the pir gene which encodes the pi initiation protein for plasmid R6K DNA replication. They resulted in an alteration by substitution of a single amino acid: threonine to isoleucine at the 108th position for the cop41, and proline to serine at the 113th position for the cop50, of the 305 amino acid pi protein. The cop41 mutation in the pi protein was found to be trans-dominant over the wild-type allele in the copy control of plasmid R6K. Moreover, it was shown that the altered pi protein was not overproduced in maxicells carrying this mutant plasmid and had a higher affinity to the repeated sequence which is present in the pir promoter region. Most likely the mutated pi protein also interacts more efficiently with the same repeated sequences, a target of pi, in the replication origin region and increases the frequency of the initiation event per cell division.     

Molecular cloning and functional characterization of a copy number control gene (copB) of plasmid R1.

Deletions or insertions in the copB gene of plasmid R1 result in a copy mutant phenotype. The wild-type copB gene has been cloned on various plasmid vectors. The presence of such chimeric plasmids reduced the copy number of R1 copB mutant plasmids to normal or subnormal levels, indicating the expression of a trans-acting inhibitor activity from the copB chimeras. However, the cloned copB gene did not affect the copy number of wild-type R1, and no incompatibility was exerted by the cloned copB gene against wild-type R1 (or R100). Although the copB gene is not normally required for the incompatibility exerted by copA, it is shown that the CopB function is required for expression of incompatibility by the copA gene from some types of chimeric plasmids. Mutant plasmids that have lost both Cop functions replicate in an uncontrolled fashion.     

Structural properties of the beta origin of replication of plasmid R6K

The beta origin of replication of plasmid R6K, one of three active R6K origins of replication, requires most or all of a 1962-base pair (bp) sequence for activity. The nucleotide sequence of a portion of this functional beta origin was determined in an earlier study (Stalker, D., Kolter, R., and Helinski, D. (1982) J. Mol. Biol. 161, 33-43). In this work, the sequence of the remaining portion of this 1964-bp segment was obtained. In addition to its activity as an origin of replication, this sequence also contains sufficient information for autonomous replication in Escherichia coli. A 277-bp region containing seven 22-bp direct repeats is present at one end of the beta origin segment (Stalker, D., Kolter, R., and Helinski, D. (1979) Proc. Natl. Acad. Sci. U. S. A. 76, 1150-1154) while the other end contains a 140-bp sequence that includes a relaxation complex site. The 277-bp direct repeat region is required for activity of the beta origin. The start of the beta origin of replication as mapped by electron microscopy (Crosa, J. (1980) J. Biol. Chem. 255, 11075-11077) lies approximately 1000 bp away from the 277-bp region. The pi structural gene, which makes up most of the sequence between the direct repeats and the beta origin, is required in cis for beta origin activity. The pi protein also is required for beta origin activity but can be provided in trans. The nucleotide sequence just beyond the pi structural gene and within or near the start of beta origin of replication contains an open reading frame for a 151-amino acid protein. Deletions ranging from 94 bp to 1590 bp were obtained within the 1964-bp beta origin region. In every case, the deletion results in loss of origin activity even when the deleted sequence plus adjacent regions are provided in trans. These observations suggest a requirement for a specific secondary structure over an extensive region for beta origin activity.     

Trans-complementation-dependent replication of a low molecular weight origin fragment from plasmid R6K

A non-self-replicating segment (1370 base pairs) of plasmid R6K was cloned in E. coli and shown to trans-complement temperature-sensitive replication mutants of this plasmid. This segment contains the gene which codes for a protein required for initiation of replication of the plasmid, and was used as a helper in a functional assay for an origin of replication in R6K derivatives. A 420 bp fragment, derived from R6K DNA, was shown to carry a functional origin since it was capable of replicating as a plasmid in E. coli cells carrying the helper segment either on the host chromosome or on a plasmid Col E1 derivative. The copy number of the origin fragment in cells carrying the helper segment on the chromosome is essentially the same as the copy number of R6K. A model for the positive regulation of plasmid R6K replication is presented.     

An initiator protein for plasmid R6K DNA replication. Mutations affecting the copy-number control

Two kinds of mutations affecting the copy-number control of plasmid R6K were isolated and identified in an initiator pi protein by DNA sequencing. Firstly, a temperature-sensitive replication mutation, ts22, with decreased copy number results in a substitution of threonine to isoleucine at position 138 of the 305-amino-acid pi protein. Secondly, a high-copy-number (cop21) mutant was isolated from this ts mutant and was identified by an alteration of alanine to serine at position 162. This cop21 mutation suppressed the Ts character and was recessive to the wild-type allele in the copy control.     

Analysis of Agrobacterium tumefaciens plasmid pTiC58 replication region with a novel high-copy-number derivative.

The origin of replication, ori, of the nopaline tumor-inducing plasmid, pTiC58, mapped in a region that shares sequence homology with octopine plasmids pTiAch5 and pTiB6. Within this region, the minimum amount of DNA necessary for maintaining autonomous replication was a 2.6-kilobase region, which also comprised the incompatibility function inc. pTiC58 derivatives containing inc were incompatible with Agrobacterium tumefaciens plasmids pTiC58, pTiD1439, pTiAch5, pTi15955, and pTiA5 and were compatible with A. rhizogenes plasmid pRi12. Situated adjacent to the origin region was a 1.5-kilobase par segment involved in stable inheritance of pTiC58 under nonselective growth conditions. When par was present, plasmid maintenance approached that of the wild-type pTiC58. Rapid loss from the cell population was observed for plasmids not containing this locus. Another 1.5-kilobase region, cop, positively regulated pTiC58 copy number, enabling certain pTiC58 derivatives to exist at a copy number up to 80 times higher than that of wild-type pTiC58. Deletions within the cop locus resulted in reduced copy number. The ori/inc regions were flanked on either side by the par and cop loci.     

Activation in vivo of the minimal replication origin beta of plasmid R6K requires a small target sequence essential for DNA looping.

The plasmid R6K contains three distinct origins of replication: alpha, beta, and gamma. The gamma sequence is essential in cis and acts as an enhancer that activates the distant alpha and beta origins. R6K therefore represents a favorable procaryotic model system with which to unravel the biochemical mechanisms underlying selective origin activation, particularly activation involving distant sites on the same chromosome. We have discovered that plasmids containing the origins alpha and gamma required the Escherichia coli DnaA initiator protein in addition to the R6K-encoded initiator protein, Pi, and other host replisomal proteins for their maintenance in vivo. Plasmids initiating replication from origin beta required only the Pi initiator protein and other host replisomal proteins. We have exploited the differential requirement for the DnaA protein by origins gamma and beta to selectively study and localize the minimal origin beta sequences by deletion analysis as one test of a looping model of origin activation. A 64-bp region spanning the extreme -COOH terminal coding sequence of the Pi protein was found to be essential for replication in vivo in the absence of DnaA protein, consistent with the approximate physical location of the beta origin. Replication emanating from origin beta could be abolished in vivo by deletion of the 9-bp target site for Pi protein-mediated DNA looping between the gamma origin/enhancer and the distant beta origin. Electron microscopy of nascent replication intermediates generated in vivo directly confirmed our genetic localization of the beta origin. Our results strongly suggest that activation of the beta origin by a distant replication enhancer element requires a small target sequence essential for initiator protein-mediated DNA looping.     

Is103, a New Insertion Element in Escherichia Coli: Characterization and Distribution in Natural Populations

IS103 is a previously unknown insertion sequence found in Escherichia coli K12. We have sequenced IS103 and find that it is a 1441-bp element that consists of a 1395-bp core flanked by imperfect 23-bp inverted repeats. IS103 causes a 6-bp duplication of the target sequence into which it inserts. There is a single copy of IS103 present in wild-type E. coli K12 strain HfrC. In strain X342 and its descendents there are two additional copies, one of which is located within the bglF gene. IS103 is capable of excising from within bglF and restoring function of that gene. IS103 exhibits 44% sequence identity with IS3, suggesting that the two insertion sequences are probably derived from a common ancestor. We have examined the distribution of IS103 in the chromosomes and plasmids of the ECOR collection of natural isolates of E. coli. IS103 is found in 36 of the 71 strains examined, and it strongly tends to inhabit plasmids rather than chromosomes. Comparison of the observed distribution of IS103 with distributions predicted by nine different models for the regulation of transposition according to copy number and of the effects of copy number on fitness suggest that transposition of IS103 is strongly regulated and that it has only minor effects on fitness. The strong clustering of IS103 within one phylogenetic subgroup of the E. coli population despite its presence on plasmids suggests that plasmids tend to remain within closely related strains and that transfer to distantly related strains is inhibited.     

Temperature-dependent and amber copy mutants of plasmid R1drd-19 in Escherichia coli.

The isolation of conditional mutants with an altered copy number of the R plasmid R1drd-19 is described. Temperature-dependent as well as amber-suppressible mutants were found. These mutant plasmids have been named pKN301 and pKN303, respectively. Both types of mutations reside on the R plasmid. No difference in molecular weight could be detected by neutral sucrose gradient centrifugation for any of the mutant plasmids when compared with the wild-type plasmid. The number of copies of the plasmids was determined by measurement of the specific activity of the R plasmid-mediated β-lactamase and by measurement of covalently closed circular (CCC) DNA in alkaline sucrose gradients and dye-CsCl density gradients. Below 34 °C the temperature-dependent mutant, pKN301, had the same copy number as the wild type, while this was four times that of the wild type above 37 °C. The amber mutant pKN303 had a copy number indistinguishable from that of the wild-type plasmid in a strain containing a strong amber suppressor and a copy number about five times that of the wild-type plasmid in a strain lacking an amber suppressor. In a strain containing a temperature-sensitive amber suppressor, the amber mutant's copy number increased with the decrease in amber suppressor activity. Thus, the existence of the temperature-dependent and the amber-suppressible R-plasmid copy mutants indicates that the system that controls the replication of plasmid R1drd-19 contains an element with a negative function and that this element is a protein.     

Stable inheritance of plasmid R1 requires two different loci.

The largest EcoRI fragment from plasmid R1 mediates a stability phenotype which is required to ensure the stable inheritance of this low-copy-number plasmid. When covalently linked to small, unstable R1 derivatives, this fragment makes the plasmids as stable as the wild-type R1 plasmid. A genetic analysis showed that two independently acting stabilization functions are encoded by this EcoRI fragment, both of which have the potential of partial stabilization of mini-R1 plasmids. The two loci are located at opposite ends of the fragment. Stabilization was also obtained by inserting these regions in unrelated, unstable plasmids from the p15 group. One of the two functions was very efficient in stabilizing such foreign replicons. Besides the stability phenotype, these genes exert incompatibility in an allele-specific manner. The stability functions do not seem to interfere seriously with the copy number of the plasmid.